Upload
others
View
0
Download
0
Embed Size (px)
Citation preview
THE AUTOMOTIVE PROFESSIONAL
DESIGNED FOR THE MOST DEMANDING INDUSTRIAL ENVIRONMENTSThe Workshop range of chargers are a powerful tool for the automotive trade. Constructed from a durable pressed metal outer enclosure for superior strength and durability and utilising ultra reliable transformer technology to ensure they last the extra mile in the most utilising ultra reliable transformer technology to ensure they last the extra mile in the most unforgiving industrial situations. They are a versatile unit that can be used to charge many battery types and are powerful enough to ensure the job gets done every time.
hDBC21 12V 14A
hDBC33 12/24V 20A
hDBC20 6/12/24V 12A
hDBC35 6/12/24V 21A
36
BATT
ERY
CHAR
GERS
Workshop chargers use a traditional, robust and ultra reliable process to deliver powerful charging suitable for automotive batteries. Designed to get power back into the batteries quickly for a quick turnaround and the 2 stages of charging ensure that the battery won’t be overcharged.
2 STAGE AUTOMATIC CHARGING*
WORKSHOP BATTERY CHARGERS Manual & Automatic
Features
The Workshop charger range feature multi-voltage operation, ideal for industrial environments where 6V, 12V or 24V batteries are often utilised.
Multi-voltage Operation*
The Workshop range of battery chargers feature an engine start function which delivers a high current charge into the battery. it simply requires the charger to be connected to the battery and given a 5 minute pre-charge after which time you can simply start your engine.#
ProtectionEngine Start
The extensive range of Workshop chargers feature adjustable output allowing use on a wide range of different sized batteries and ensuring optimum and safe charging.
Adjustable Output*
VOLTAGE
CURRENT (AMPS)
1. BULK CHARGING
Automatically stops when battery is full
2. FLOAT
Continues to top up battery keeping it fully charged
# Subject to battery condition* on selected models
hDBC45 12/24V 30A
hDBC90 12/24V 70A
hDBC200 12V 160A / 24V 185A
hDBC300 12V 270A / 24V 440A
To ensure complete safety for the unit and operator, the Workshop range of battery chargers feature thermal over load and polarity protection. This prevents damaging the charger in the event of accidental reverse connection or short circuit.
37
BATT
ERY
CHAR
GERS
37
W O r K S h O P
38
BATT
ERY
CHAR
GERS HDBC21
Manual 12V 14A Battery ChargerOffering simplistic operation, this heavy duty charger with its durable construction and reliable transformer technology is ideal for workshop environments.
FEATURES
Starts vehicle with a flat battery after a controlled 5 minute charge*
Clearly displays rate of charge in Amps to ensure an accurate and thorough charge
Fuse protection preventsdamage to the charger in the event of reverse polarity and short circuit
Pressed metal enclosure and ultra reliable transformer technology for superior strength
Adjustable settings to suit different battery sizes
SPECIFICATIONS
PART NO. hdBc21
TYPE Manual
INPUT 240V, 50hz, 300W
OUTPUT 11.0a at 12V (low)14.0a at 12V (boost)
ENGINE START 3 sec on, 2 min off 80a at 6V
MINIMUM STARTVOLTAGE
0.0V
BACK DRAIN 5ma
APPROVALS electrical Safety, eMc
BATTERY ChARGE TIMES
hDBC21 VOlTlTl age BaTage BaT TTage BaTTage Ba ery Size charge TiMe
AUTOMOTIVE 12V 300–1000cca 6–15 hrs
MARINE 12V 550–1300Mca 8–18 hrs
PRODUCT DETAILS
Vehicles
APPLICATIONS
Ideal Battery Type
Charge Meter Engine Start Function Adjustable Output Polarity Protection Durable Construction
STARTING
reliable transformer technology is ideal for workshop environments.
FEATURES
reliable transformer technology is ideal for workshop environments.
REPLACEMENT PARTS hDBCF30A 30a fuse (20 pieces) * Subject to battery condition
W O r K S h O P
39
BATT
ERY
CHAR
GERSHDBC33
Manual 12/24V 20A Battery ChargerDesigned specifically for workshop duties, this powerful manual charger offers both 12 and 24 Volt operation, adjustable output and a handy engine start function.
FEATURES
Starts vehicle with a flat battery after a controlled 5 minute charge*
Clearly displays rate of charge in Amps to ensure an accurate and thorough charge
Adjustable voltage selection to suit 12 or 24 Volt operation
Fuse protection preventsdamage to the charger in the event of reverse polarity and short circuit
Adjustable settings to suit different battery sizes
SPECIFICATIONS
PART NO. hdBc33
TYPE Manual
INPUT 240V, 50hz, 800W
OUTPUT 12.0a at 12V (low) 20.0a at 12V (boost)
12.0a at 24V (low) 20.0a at 24V (boost)
ENGINE START 3 sec on, 2 min off 12V 24V
120a at 6V 120a at 12V
MINIMUM STARTVOLTAGE
0.0V
BACK DRAIN 12V 24V
5ma 11ma
APPROVALS electrical Safety, eMc
BATTERY ChARGE TIMES
hDBC33 VOlTlTl age BaTage BaT TTage BaTTage Ba ery Size charge TiMe
AUTOMOTIVE 12, 24V 450–1500cca 6–15 hrs
MARINE 12, 24V 600–1800Mca 8–18 hrs
PRODUCT DETAILS
Vehicles
APPLICATIONS
Ideal Battery Type
Charge Meter Engine Start Function Adjustable Output Multi-Voltage Operation Polarity Protection
STARTING
adjustable output and a handy engine start function.
FEATURES
REPLACEMENT PARTS hDBCF30A 30a fuse (20 pieces) * Subject to battery condition
40
W O r K S h O PBA
TTER
Y CH
ARGE
RS
40
FEATURES
HDBC20Automatic & Manual 6/12/24V 12A2 Stage Battery Charger
Charging options keep the operator in control
Adjustable to suit 6, 12 or 24 Volt operation
Starts vehicle with a flat battery after a controlled 5 minute charge*
Displays Volt and Amp readings for accurate charge status
Automatically turns charger off at set time
With plenty of power, engine start function and the ability to charge 6, 12 or 24V batteries, it is perfectly suited to mechanical workshops and auto electricians.
SPECIFICATIONS
PART NO. hdBc20
TYPE automatic and Manual
INPUT 240V, 50hz, 324W
OUTPUT 12.0a at 6.0V12.0a at 12.0V7.7a at 26.0V
ENGINE START 3 cycles 5 min on, 20 min off6V 12V 24V
50a at 3.6V 50a at 7.2V 25a at 14.4V
ChARGE CONTROL 6V 12V 24V
cut out: 7.1V 14.2V 28.4Vcut in: 6.7V 13.4V 26.8VStart: 0.0V 0.0V 0.0V
APPROVALS electrical Safety, eMc
BATTERY ChARGE TIMES
hDBC20 VOlTlTl age BaTage BaT TTage BaTTage Ba ery Size charge TiMe
AUTOMOTIVE 6, 12, 24V 450–1200cca 6–15 hrs
MARINE 6, 12, 24V 600–1400Mca 8–18 hrs
L.E.D ChARGE INDICATION
• RED LIGhT FLAShING Overload
• SECOND RED LIGhT ON Power on
• SECOND RED LIGhT FLAShING reverse connection
• AMBER LIGhT ON charging
• GREEN LIGhT ON Fully charged
L.E.D SCREEN Voltage/current
PRODUCT DETAILS
With plenty of power, engine start function and the ability to charge 6, 12 or 24V batteries, it is perfectly suited to mechanical workshops and auto
Vehicles
APPLICATIONS
Ideal Battery Type
Multi-Voltage Operation Automatic or Manual 0–14 hour Timer Engine Start Function L.E.D Display
STARTING
* Subject to battery condition
41
BATT
ERY
CHAR
GERS
W O r K S h O P
HDBC35Automatic & Manual 6/12/24V 21A 2 Stage Battery ChargerDesigned for the most demanding environments such as heavy duty transport and agriculture. Delivers ample power, sturdy construction and various charging options.
SPECIFICATIONS
PART NO. hdBc35
TYPE automatic and Manual
INPUT 240V, 50hz, 636W
OUTPUT 21.0a at 6.0V21.0a at 12.0V 13.5a at 26.0V
ENGINE START 3 cycles 5 min on, 20 min off6V 12V 24V
85a at 3.6V 85a at 7.2V 45a at 14.4V
ChARGE CONTROL 6V 12V 24V
cut out: 7.1V 14.2V 28.4Vcut in: 6.7V 13.4V 26.8VStart: 0.0V 0.0V 0.0V
APPROVALS electrical Safety, eMc
BATTERY ChARGE TIMES
hDBC35 VOlTlTl age BaTage BaT TTage BaTTage Ba ery Size charge TiMe
AUTOMOTIVE 6, 12, 24V 550–2000cca 4–10 hrs
MARINE 6, 12, 24V 700–2500Mca 5–12 hrs
L.E.D ChARGE INDICATION
• RED LIGhT FLAShING Overload
• SECOND RED LIGhT ON Power on
• SECOND RED LIGhT FLAShING reverse connection
• AMBER LIGhT ON charging
• GREEN LIGhT ON Fully charged
L.E.D SCREEN Voltage/current
PRODUCT DETAILS
Designed for the most demanding environments such as heavy duty transport and agriculture. Delivers ample power, sturdy
Designed for the most demanding environments such as heavy duty transport and agriculture. Delivers ample power, sturdy
FEATURES
Charging options keep the operator in control
Adjustable to suit 6, 12 or 24 Volt operation
Starts vehicle with a flat battery after a controlled 5 minute charge*
Displays Volt and Amp readings for accurate charge status
Automatically turns charger off at set time
Multi-Voltage Operation Automatic or Manual 0–14 hour Timer Engine Start Function L.E.D Display
Vehicles
APPLICATIONS
Ideal Battery Type
STARTING
* Subject to battery condition
42
BATT
ERY
CHAR
GERS
W O r K S h O P
HDBC45Automatic & Manual 12/24V 30A 3 Stage Battery ChargerOffering both manual and automatic operation, this intelligent 12/24V charger with digital control boasts both engine start function as well as adjustable output via a precise dial for accurate charging of small to large batteries, both starting and deep cycle.
FEATURES
Starts vehicle with a flat battery after a controlled 5 minute charge*
Displays Volt and Amp readings for accurate charge status
Adjustable voltage selection to suit 12 or 24 Volt operation
Charging options keep the operator in control
Adjustable settings to suit different battery sizes
SPECIFICATIONS
PART NO. hdBc45
TYPE automatic and Manual
INPUT 240V, 50hz, 1000W
OUTPUT 1–30a at 12V 1–30a at 24V
ENGINE START 3 sec on, 2 min off 12V 24V
180a at 6V 180a at 12V
MINIMUM STARTVOLTAGE
0.0V
BACK DRAIN 12V 24V
7.3ma 13.6ma
APPROVALS electrical Safety, eMc
BATTERY ChARGE TIMES
hDBC45 VOlTlTl age BaTage BaT TTage BaTTage Ba ery Size charge TiMe
AUTOMOTIVE 12, 24V 50–2800cca 6–15 hrs
MARINE 12, 24V 60–3500Mca 8–18 hrs
DEEP CYCLE 12, 24V 7–450ah 7–17 hrs
PRODUCT DETAILS
Vehicles
APPLICATIONS
Ideal Battery Types
L.E.D Display Engine Start Function Adjustable Output Multi-Voltage Operation Automatic or Manual
STARTING DEEP CYCLE
REPLACEMENT PARTS hDBCF50A 50a fuse (20 pieces)
1. BULK reduces charging time by delivering maximum charge to a set voltage
2. ABSORTION ensures a full charge to the battery without overcharging
3. STANDBY restarts when battery voltage drops below 12.6V
VOLTAGE
CURRENT (AMPS)
3 STAGE CHARGE
Automatic & Manual 12/24V 30A 3 Stage Battery ChargerOffering both manual and automatic
both engine start function as well as
estarts when battery
Automatic & Manual 12/24V 30A 3 Stage Battery Charger
estarts when battery
* Subject to battery condition
W O r K S h O P
43
BATT
ERY
CHAR
GERSHDBC90
Manual 12/24V 70A Battery ChargerAn immensely powerful charger housed within a compact and robust trolley enclosure for ease of portability. Features 12/24V operation, adjustable output and an engine start function.
FEATURES
Starts vehicle with a flat battery after a controlled 5 minute charge*
Clearly displays rate of charge in Amps to ensure an accurate and thorough charge
Adjustable voltage selection to suit 12 or 24 Volt operation
Automatically turns charger off at set time (rapid charge setting only)
Adjustable settings to suit different battery sizes
SPECIFICATIONS
PART NO. hdBc90
TYPE Manual
INPUT 240V, 50hz, 2000W
OUTPUT 9.0a at 12V (setting 1) 23.0a at 12V (setting 2) 60.0a at 12V (setting 3) 70.0a at 12V (rapid charge)
11.0a at 24V (setting 1) 27.0a at 24V (setting 2) 60.0a at 24V (setting 3) 70.0a at 24V (rapid charge)
ENGINE START 3 sec on, 2 min off 12V 24V
360a at 6V 360a at 12V
MINIMUM STARTVOLTAGE
0.0V
BACK DRAIN 12V 24V
5.5ma 11.6ma
APPROVALS electrical Safety, eMc
BATTERY ChARGE TIMES
hDBC90 VOlTlTl age BaTage BaT TTage BaTTage Ba ery Size charge TiMe
AUTOMOTIVE 12, 24V 260–5000cca 6–15 hrs
MARINE 12, 24V 480–8400Mca 8–18 hrs
PRODUCT DETAILS
Vehicles
APPLICATIONS
Ideal Battery Type
Charge Meter Engine Start Function Adjustable Output Multi-Voltage Operation 0-60min Timer
STARTING
Manual 12/24V 70A
An immensely powerful charger housed within a compact and robust trolley enclosure for ease of portability. Features 12/24V operation, adjustable output and
REPLACEMENT PARTS hDBCF100A 100a fuse (20 pieces) * Subject to battery condition
44
BATT
ERY
CHAR
GERS
W O r K S h O P
HDBC200Manual 12V 160A/ 24V 185A Battery ChargerIdeally suited to the huge demands of the largest of vehicles, such as earth moving machinery etc. Featuring adjustable charge settings, engine start function with remote lead and 12/24 Volt operation.
FEATURES
Starts vehicle with a flat battery after a controlled 5 minute charge*
Clearly displays rate of charge in Amps to ensure an accurate and thorough charge
Adjustable voltage selection to suit 12 or 24 Volt operation
Automatically turns charger off at set time
Adjustable settings to suit different battery sizes
SPECIFICATIONS
PART NO. hdBc200
TYPE Manual
INPUT 415V, 50hz, 2500W
OUTPUT 90.0a at 12V (setting 1) 100.0a at 12V (setting 2) 115.0a at 12V (setting 3) 130.0a at 12V (setting 4) 160.0a at 12V (setting 5)
95.0a at 24V (setting 1) 107.0a at 24V (setting 2) 135.0a at 24V (setting 3) 150.0a at 24V (setting 4) 185.0a at 24V (setting 5)
ENGINE START 3 sec on, 2 min off 12V 24V
640a at 6V 640a at 12V
MINIMUM STARTVOLTAGE
0.0V
BACK DRAIN 12V 24V
0.0ma 0.0ma
APPROVALS eMc
BATTERY ChARGE TIMES
hDBC200 VOlTlTl age BaTage BaT TTage BaTTage Ba ery Size charge TiMe
AUTOMOTIVE 12V 24V
2100–11,500cca2100–11,500cca
5–15 hrs 5–15 hrs
MARINE 12V 24V
4100–19,000Mca4100–19,000Mca
8–18 hrs 8–18 hrs
PRODUCT DETAILS
APPLICATIONS
Ideal Battery Type
Charge Meter Engine Start Function Adjustable Output Multi-Voltage Operation 0-60min Timer
STARTING
engine start remote lead
3 Phase (Plug not included)
REPLACEMENT PARTS hDBCF300A 300a fuse (10 pieces)
Vehicles
* Subject to battery condition
45
BATT
ERY
CHAR
GERS
W O r K S h O P
HDBC300Manual 12V 270A/ 24V 440A Battery ChargerThe most powerful charger in the Projecta line up, this ultra heavy-duty unit offers easy to navigate controls, multiple charge settings and convenient portability engineered for the biggest of jobs.
FEATURES
Starts vehicle with a flat battery after a controlled 5 minute charge*
Clearly displays rate of charge in Amps to ensure an accurate and thorough charge
Adjustable voltage selection to suit 12 or 24 Volt operation
Automatically turns charger off at set time
Adjustable settings to suit different battery sizes
SPECIFICATIONS
PART NO. hdBc300
TYPE Manual
INPUT 415V, 50hz, 7000W
OUTPUT 105.0a at 12V (setting 1) 130.0a at 12V (setting 2) 160.0a at 12V (setting 3) 200.0a at 12V (setting 4) 240.0a at 12V (setting 5) 270.0a at 12V (setting 6)
210.0a at 24V (setting 1) 260.0a at 24V (setting 2) 300.0a at 24V (setting 3) 350.0a at 24V (setting 4) 390.0a at 24V (setting 5) 440.0a at 24V (setting 6)
ENGINE START 3 sec on, 2 min off 12V 24V
1000a at 6V 1300a at 12V
MINIMUM STARTVOLTAGE
0.0V
BACK DRAIN 12V 24V
0.0ma 0.0ma
APPROVALS eMc
BATTERY ChARGE TIMES
hDBC300 VOlTlTl age BaTage BaT TTage BaTTage Ba ery Size charge TiMe
AUTOMOTIVE 12V 24V
3000–20,000cca6000–32,000cca
6–15 hrs 6–15 hrs
MARINE 12V 24V
5500–33,000Mca11,000–53,000Mca
8–18 hrs 8–18 hrs
PRODUCT DETAILS
APPLICATIONS
Ideal Battery Type
Charge Meter Engine Start Function Adjustable Output Multi-Voltage Operation 0-60min Timer
STARTING
Manual 12V 270A/
engine start remote lead
3 Phase (Plug not included)
Vehicles
REPLACEMENT PARTS hDBCF300A 300a fuse (10 pieces) * Subject to battery condition
c h a r g e r g u i d e
200 STARTINGhDBC21
hDBC33
hCBC20
hDBC35
hDBC45
hDBC90
hDBC200
hDBC300
12V
12/24V
6/12/24V
6/12/24V
12/24V
12/24V
12/24V
12/24V
12V
12/24V
6/12/24V
6/12/24V
12/24V
12/24V
12/24V
12/24V
Low-High
Low-High
Dial 1-30A
1–4 Settings
1–5 Settings
1–6 Settings
Low-High
Low-High
Dial 1-30A
1–4 Settings
1–5 Settings
1–6 Settings
Manual
Manual
Manual/Auto
Manual/Auto
Manual/Auto
Manual
Manual
Manual
MOTOR BI
KE
PASS
ENGER
CAR
4WD
SMALL
TRUCK
BUS
LARGE T
RUCK
MINE V
EhICL
E
ROAD TRAIN
STARTIN
G
DEEP C
YCLE
OUTPUT
VOLTAGE
ADJUST
ABLE
OUTPUT
ChARGER
TYPE
MODEL IDEAL BATTERY TYPES
FEATURESVEhICLE GUIDE
✓
✓
✓
✓
✓ ✓
✓
✓
✓
WORKSHOP CHARGER SELECTION GUIDEAutomatic & Manual Chargers
46
BATT
ERY
CHAR
GERS
hDBC45