Upload
others
View
6
Download
0
Embed Size (px)
Citation preview
214
ROYAL SHEFFIELD Cabinetry Specification Guide
royalsheffieldcabinetry.com
Vanity Cabinet31” High x 18” Deep
• Drilled for full depth shelves. Shelves are not included. (See Accessories section.)• Minimum reduced width available is 24”, minimum reduced depth available is 4”, and minimum reduced height available is 31”. Maximum oversized depth available is 40 1/2”. Vanity Cabinets range in size
from 24” to 72” wide, 31” and34-1/2” high, 18” and 21” deep.
(L/R) = Specify L (left) or R (right) hinging.(BD) = Butt Doors. All BD cabinets wider than 36” will have a center stile, unless specified.
All cabinets finished both sides.Toe Kick cover is not included.Due to the small sizes of doors and drawer fronts on vanities, please refer to the individual door pages for styling mini-mums/restrictions.
Butt Doors (shown above): A pair of doors that are sized to cover a wide opening without a center stile between them. Typically, a 1/8” gap is allowed between the butt doors.
Bath Cabinets - Vanities
Vanity Cabinet31” High x 21” Deep
DRS DWRS SHLVSV241831-BD 2 0 0V271831-BD 2 0 0V301831-BD 2 0 0V331831-BD 2 0 0V361831-BD 2 0 0
31"34 1/2"
18", 21" 24", 27", 30"33", 36"
• Drilled for full depth shelves. Shelves are not included. (See Accessories section.)• Minimum reduced width available is 24”, minimum reduced depth available is 4”, and minimum reduced height available is 31”. Maximum oversized depth available is 40 1/2”.
DRS DWRS SHLVSV242131-BD 2 0 0V272131-BD 2 0 0V302131-BD 2 0 0V332131-BD 2 0 0V362131-BD 2 0 0
31"34 1/2"
18", 21" 24", 27", 30"33", 36"
Vanity Cabinet34 1/2” High x 18” Deep
• Drilled for full depth shelves. Shelves are not included. (See Accessories section.)• Minimum reduced width available is 24”, minimum reduced depth available is 4”, and minimum reduced height available is 31”. Maximum oversized depth available is 40 1/2”.
Vanity Cabinet34 1/2” High x 21” Deep
DRS DWRS SHLVSV241834-BD 2 0 0V271834-BD 2 0 0V301834-BD 2 0 0V331834-BD 2 0 0V361834-BD 2 0 0
31"34 1/2"
18", 21" 24", 27", 30"33", 36"
• Drilled for full depth shelves. Shelves are not included. (See Accessories section.)• Minimum reduced width available is 24”, minimum reduced depth available is 4”, and minimum reduced height available is 31”. Maximum oversized depth available is 40 1/2”.
DRS DWR SHLVV242134-BD 2 0 0 u
V272134-BD 2 0 0V302134-BD 2 0 0V332134-BD 2 0 0V362134-BD 2 0 0
31"34 1/2"
18", 21" 24", 27", 30"33", 36"
u This size in stock in Montana Maple Cocoa, Pawnee Maple Oyster, Providence Cherry Autumn Coffee, Wesley Oak Autumn, Valley Cherry Sable.
Bath Cabinets: VanitiesB
ATH
CA
BIN
ETS
215
ROYAL SHEFFIELD Cabinetry Specification Guide
royalsheffieldcabinetry.com Bath Cabinets: Vanities
BAT
H C
AB
INET
S
Vanity Sink Base Double31” High x 18” Deep
Vanity Sink Base Double31” High x 21” Deep
Vanity Sink Base Double34 1/2” High x 18” Deep
• All cabinets have two (2) sets of butt doors• Cabinet is not drilled for shelves.• Minimum reduced width available is 48”, minimum reduced depth available is 4”, and minimum reduced height available is 31”. Maximum oversized depth available is 40 1/2”.
DRS DWRS SHLVSV4D481831-BD 4 0 0V4D541831-BD 4 0 0V4D601831-BD 4 0 0V4D721831-BD 4 0 0
48", 54", 60", 72"
31"34 1/2"
18", 21"
• All cabinets have two (2) sets of butt doors• Cabinet is not drilled for shelves.• Minimum reduced width available is 48”, minimum reduced depth available is 4”, and minimum reduced height available is 31”. Maximum oversized depth available is 40 1/2”.
DRS DWRS SHLVSV4D482131-BD 4 0 0V4D542131-BD 4 0 0V4D602131-BD 4 0 0V4D722131-BD 4 0 0
48", 54", 60", 72"
31"34 1/2"
18", 21"
• All cabinets have two (2) sets of butt doors• Cabinet is not drilled for shelves.• Minimum reduced width available is 48”, minimum reduced depth available is 4”, and minimum reduced height available is 31”. Maximum oversized depth available is 40 1/2”.
DRS DWRS SHLVSV4D481834-BD 4 0 0V4D541834-BD 4 0 0V4D601834-BD 4 0 0V4D721834-BD 4 0 0
48", 54", 60", 72"
31"34 1/2"
18", 21"
Vanity w/Full Height Doors31” High x 18” Deep
• Drilled for full depth shelves. Shelves are not included. (See Accessories section.)• Minimum reduced width available is 24”, minimum reduced depth available is 4”, and minimum reduced height available is 31”. Maximum oversized depth available is 40 1/2”.
DRS DWRS SHLVSV241831FHD-BD 2 0 0V271831FHD-BD 2 0 0V301831FHD-BD 2 0 0V331831FHD-BD 2 0 0V361831FHD-BD 2 0 0
18"21"
24"27"30"33"36"
31"34 1/2"
Vanity Sink Base Double34 1/2” High x 21” Deep
• All cabinets have two (2) sets of butt doors• Cabinet is not drilled for shelves.• Minimum reduced width available is 48”, minimum reduced depth available is 4”, and minimum reduced height available is 31”. Maximum oversized depth available is 40 1/2”.
DRS DWRS SHLVSV4D482134-BD 4 0 0V4D542134-BD 4 0 0V4D602134-BD 4 0 0V4D722134-BD 4 0 0
48", 54", 60", 72"
31"34 1/2"
18", 21"
Vanity w/Full Height Doors31” High x 21” Deep
• Drilled for full depth shelves. Shelves are not included. (See Accessories section.)• Minimum reduced width available is 24”, minimum reduced depth available is 4”, and minimum reduced height available is 31”. Maximum oversized depth available is 40 1/2”.
DRS DWRS SHLVSV242131FHD-BD 2 0 0V272131FHD-BD 2 0 0V302131FHD-BD 2 0 0V332131FHD-BD 2 0 0V362131FHD-BD 2 0 0
18"21"
24"27"30"33"36"
31"34 1/2"
216
ROYAL SHEFFIELD Cabinetry Specification Guide
royalsheffieldcabinetry.comBath Cabinets: VanitiesB
ATH
CA
BIN
ETS
Vanity w/Full Height Doors34 1/2” High x 18” Deep
Vanity with Top Drawers31” High x 18” / 21” Deep
Vanity with Top Drawers31” High x 18” Deep
• Butt doors in center section.• Door style selection may be limited for width greater than 36” and equal or less than 42”. Please note minimum door restrictions for door styles, refer to individual door pages for styling minimums/restrictions.• Minimum reduced width available is 27”, minimum reduced depth available is 12”, and minimum reduced height available is 31”. Maximum oversized depth available is 30” and maximum oversized height avail- able is 40 1/2” (See modification sections.• Drawer prep for plumbing modifications are not available.
(L/R) = Specify L or R hinging. (BD) = Butt Doors. All BD cabinets wider than 36” will have a center stile
Vanity w/Full Height Doors34 1/2” High x 21” Deep
• Drilled for full depth shelves. Shelves are not included. (See Accessories section.)• Minimum reduced width available is 24”, minimum reduced depth available is 4”, and minimum reduced height available is 31”. Maximum oversized depth available is 40 1/2”.
DRS DWRS SHLVSV242134FHD-BD 2 0 0V272134FHD-BD 2 0 0V302134FHD-BD 2 0 0V332134FHD-BD 2 0 0V362134FHD-BD 2 0 0
• Drilled for full depth shelves. Shelves are not included. (See Accessories section.)• Minimum reduced width available is 24”, minimum reduced depth available is 4”, and minimum reduced height available is 31”. Maximum oversized depth available is 40 1/2”.
DRS DWRS SHLVSV241834FHD-BD 2 0 0V271834FHD-BD 2 0 0V301834FHD-BD 2 0 0V331834FHD-BD 2 0 0V361834FHD-BD 2 0 0
18"21"
24"27"30"33"36"
31"34 1/2"
18"21"
24"27"30"33"36"
31"34 1/2"
• Minimum reduced width available is 24”, minimum reduced depth available is 4”, and minimum reduced height available is 31”. Maximum oversized depth available is 40 1/2”.
18” DEPTH DRS DWRS SHLVSVTD361831-BD 2 2 021” DEPTHVTD362131-BD 2 2 0
18", 21"
36"
31"34 1/2"
Vanity with Top Drawers34 1/2” High x 18” / 21” Deep
• Minimum reduced width available is 24”, minimum reduced depth available is 4”, and minimum reduced height available is 31”. Maximum oversized depth available is 40 1/2”.
18” DEPTH DRS DWRS SHLVSVTD361834-BD 2 2 021” DEPTHVTD362134-BD 2 2 0
18", 21"
36"
31"34 1/2"
DRS DWRS SHLVSVTD421831-BD 4 2 0VTD481831-BD 4 2 0VTD541831-BD 4 2 0
31"34 1/2"
42", 48", 54"
18", 21"
Vanity with Top Drawers34 1/2” High x 21” Deep
• Butt doors in center section.• Door style selection may be limited for width greater than 36” and equal or less than 42”. Please note minimum door restrictions for door styles, refer to individual door pages for styling minimums/restrictions.• Minimum reduced width available is 27”, minimum reduced depth available is 12”, and minimum reduced height available is 31”. Maximum oversized depth available is 30” and maximum oversized height avail- able is 40 1/2” (See modification sections.• Drawer prep for plumbing modifications are not available.
DRS DWRS SHLVSVTD422134-BD 4 2 0VTD482134-BD 4 2 0VTD542134-BD 4 2 0
31"34 1/2"
42", 48", 54"
18", 21"
217
ROYAL SHEFFIELD Cabinetry Specification Guide
royalsheffieldcabinetry.com Bath Cabinets: Vanities
BAT
H C
AB
INET
S
(L/R) = Specify L or R hinging. (BD) = Butt Doors. All BD cabinets wider than 36” will have a center stile
Vanity with Top Drawers34 1/2” High x 18” Deep
Vanity w/Side Drawers (L or R)31” High x 18” / 21” Deep
Vanity w/Side Drawers (L or R)34 1/2” High x 18” / 21” Deep
• Butt doors in center section.• Door style selection may be limited for width greater than 36” and equal or less than 42”. Please note minimum door restrictions for door styles, refer to individual door pages for styling minimums/restrictions.• Minimum reduced width available is 27”, minimum reduced depth available is 12”, and minimum reduced height available is 31”. Maximum oversized depth available is 30” and maximum oversized height avail- able is 40 1/2” (See modification sections.• Drawer prep for plumbing modification is not available.
DRS DWRS SHLVSVTD421834-BD 4 2 0VTD481834-BD 4 2 0VTD541834-BD 4 2 0
31"34 1/2"
42", 48", 54"
18", 21"
Vanity with Top Drawers34 1/2” High x 21” Deep
• Butt doors in center section.• Door style selection may be limited for width greater than 36” and equal or less than 42”. Please note minimum door restrictions for door styles, refer to individual door pages for styling minimums/restrictions.• Minimum reduced width available is 27”, minimum reduced depth available is 12”, and minimum reduced height available is 31”. Maximum oversized depth available is 30” and maximum oversized height avail- able is 40 1/2” (See modification sections.• Drawer prep for plumbing modification is not available.
DRS DWRS SHLVSVTD422134-BD 4 2 0VTD482134-BD 4 2 0VTD542134-BD 4 2 0
31"34 1/2"
42", 48", 54"
18", 21"
• Door is hinged opposite of drawer stack.• All two door cabinets have butt doors.• L and R indicates location of drawer stack. SDR shown.• Min. reduced width available is 24”, min. reduced depth available 12”, and min. reduced height available 31”. Max. over- sized depth available 30” and max. over sized height available is 40 1/2” (See modification sections.• When using reduced width modification in 36” wide unit, the cabinet will change to a single door unit hinged on the outside stile.• Drawer prep for plumbing modification is not available.18” DEPTH DRS DWRS SHLVSV241831SDL 1 2 0V241831SDR 1 2 0V271831SDL 1 2 0V271831SDR 1 2 0V301831SDL 1 2 0V301831SDR 1 2 0V331831SDL 1 2 0V331831SDR 1 2 0V361831SDL 2 2 0V361831SDR 2 2 021” DEPTHV242131SDL 1 2 0V242131SDR 1 2 0V272131SDL 1 2 0V272131SDR 1 2 0V302131SDL 1 2 0V302131SDR 1 2 0V332131SDL 1 2 0V332131SDR 1 2 0V362131SDL 2 2 0V362131SDR 2 2 0
31"34 1/2"
36"
18"21"
• Door is hinged opposite of drawer stack.• All two door cabinets have butt doors.• L and R indicates location of drawer stack. SDR shown.• Min. reduced width available is 24”, min. reduced depth available 12”, and min. reduced height available 31”. Max. over sized depth available 30”, max. oversized height available 40 1/2” (See mod. sections.)• When using reduced width modification in 36” wide unit, the cabinet will change to a single door unit hinged on the outside stile.• Drawer prep for plumbing mod.not available.18” DEPTH DRS DWR SHLVV241834SDL 1 2 0V241834SDR 1 2 0V271834SDL 1 2 0V271834SDR 1 2 0V301834SDL 1 2 0V301834SDR 1 2 0V331834SDL 1 2 0V331834SDR 1 2 0V361834SDL 2 2 0V361834SDR 2 2 021” DEPTHV242134SDL 1 2 0V242134SDR 1 2 0V272134SDL 1 2 0V272134SDR 1 2 0V302134SDL 1 2 0 u
V302134SDR 1 2 0 u
V332134SDL 1 2 0V332134SDR 1 2 0V362134SDL 2 2 0 u
V362134SDR 2 2 0 u
31"34 1/2"
36"
18"21"
u This size in stock in Montana Maple Cocoa, Pawnee Maple Oyster, Providence Cherry Autumn Coffee, Wesley Oak Autumn, Valley Cherry Sable.
24", 27", 30", 33"
31"34 1/2"
18", 21"
24", 27", 30", 33"
31"34 1/2"
18", 21"
218
ROYAL SHEFFIELD Cabinetry Specification Guide
royalsheffieldcabinetry.comBath Cabinets: VanitiesB
ATH
CA
BIN
ETS
Vanity w/Side Drawers (L or R)31” High x 18” / 21” Deep
Vanity w/Side Drawers (L & R)31” High x 18” Deep
Vanity w/Side Drawers (L & R)34 1/2” High x 18” Deep
Vanity w/Side Drawers (L or R)34 1/2” High x 18” / 21” Deep
18” DEPTH DRS DWRS SHLVSV421831SDL 2 3 0V421831SDR 2 3 021” DEPTHV422131SDL 2 3 0V422131SDR 2 3 0
31"34 1/2"
18", 21"
42"
Vanity w/Side Drawers (L & R)31” High x 21” Deep
Vanity w/Side Drawers (L & R)34 1/2” High x 21” Deep
• All sizes have butt doors.• L and R indicates location of drawer stack. SDR shown.• Minimum reduced width available is 24”, minimum reduced depth available is 12”, and minimum reduced height available is 31”. Maximum oversized depth available is 30” and maximum oversized height avail- able is 40 1/2” (See modification sections.• When using reduced width modification in 36” wide unit, the cabinet will change to a single door unit hinged on the outside stile.• Drawer prep for plumbing modification is not available.
18” DEPTH DRS DWRS SHLVSV421834SDL 2 3 0V421834SDR 2 3 021” DEPTHV422134SDL 2 3 0V422134SDR 2 3 0
31"34 1/2"
18", 21"
42"
• All sizes have butt doors.• L and R indicates location of drawer stack. SDR shown.• Minimum reduced width available is 24”, minimum reduced depth available is 12”, and minimum reduced height available is 31”. Maximum oversized depth available is 30” and maximum oversized height avail- able is 40 1/2” (See modification sections.• When using reduced width modification in 36” wide unit, the cabinet will change to a single door unit hinged on the outside stile.• Drawer prep for plumbing modification is not available.
• Top drawers in stacks are operating.• All sizes have butt doors.• Minimum reduced width available is 48”, minimum reduced depth available is 12”, and minimum reduced height available is 31”. Maximum oversized depth available is 30” and maximum oversized height avail- able is 40 1/2” (See modification sections.• Drawer prep for plumbing modification is not available.
DRS DWRS SHLVSV481831SDLR 2 6 0V541831SDLR 2 6 0V571831SDLR 2 6 0V601831SDLR 2 6 0V721831SDLR 2 6 0
18"21"
31"34 1/2"
48"54"57"
• Top drawers in stacks are operating.• All sizes have butt doors.• Minimum reduced width available is 48”, minimum reduced depth available is 12”, and minimum reduced height available is 31”. Maximum oversized depth available is 30” and maximum oversized height avail- able is 40 1/2” (See modification sections.• Drawer prep for plumbing modification is not available.
DRS DWRS SHLVSV482131SDLR 2 6 0V542131SDLR 2 6 0V572131SDLR 2 6 0V602131SDLR 2 6 0V722131SDLR 2 6 0
18"21"
31"34 1/2"
48"54"57"
• Top drawers in stacks are operating.• All sizes have butt doors.• Minimum reduced width available is 48”, minimum reduced depth available is 12”, and minimum reduced height available is 31”. Maximum oversized depth available is 30” and maximum oversized height avail- able is 40 1/2” (See modification sections.• Drawer prep for plumbing modification is not available.
DRS DWRS SHLVSV481834SDLR 2 6 0V541834SDLR 2 6 0V571834SDLR 2 6 0V601834SDLR 2 6 0V721834SDLR 2 6 0
18"21"
31"34 1/2"
48"54"57"
• Top drawers in stacks are operating.• All sizes have butt doors.• Minimum reduced width available is 48”, minimum reduced depth available is 12”, and minimum reduced height available is 31”. Maximum oversized depth available is 30” and maximum oversized height avail- able is 40 1/2” (See modification sections.• Drawer prep for plumbing modification is not available.
DRS DWR SHLVV482134SDLR 2 6 0 u
V542134SDLR 2 6 0V572134SDLR 2 6 0V602134SDLR 2 6 0V722134SDLR 2 6 0
18"21"
31"34 1/2"
48"54"57"
u This size in stock in Montana Maple Cocoa, Pawnee Maple Oyster, Providence Cherry Autumn Coffee, Wesley Oak Autumn, Valley Cherry Sable.
(L/R) = Specify L or R hinging. (BD) = Butt Doors. All BD cabinets wider than 36” will have a center stile
219
ROYAL SHEFFIELD Cabinetry Specification Guide
royalsheffieldcabinetry.com Bath Cabinets: Vanities
BAT
H C
AB
INET
S
(L/R) = Specify L or R hinging. (BD) = Butt Doors. All BD cabinets wider than 36” will have a center stile
Vanity Drawer Base Double34 1/2” High x 21” Deep
• Consists of (1) V302134SDL 30” cabinet with two drawers on left and (1) V302134- SDLR 30” cabinet with two drawers on right.• Cabinets are not drilled for shelves.• For use with double bowl vanity tops only.
DRS DWR SHLVV4D602134-SDLR
2 4 0 u
u In stock in Montana Maple Cocoa, Pawnee Maple Oyster, Providence Cherry Autumn Coffee, Wesley Oak Autumn, Valley Cherry Sable.
Vanity w/Center Drawer Stack60” Wide x 18” / 21” Deep
31” HIGH DRS DWRS SHLVSV601831SDC-3 4 3 0V602131SDC-3 4 3 034 1/2” HIGHV601834SDC-3 4 3 0V602134SDC-3 4 3 0
18"21"
31"34 1/2"
60"
• Top drawer in stack is operating.• One set of butt doors in each outside section.• Minimum reduced width available is 60”, minimum reduced depth available is 12”, and minimum reduced height available is 31”. Maximum oversized depth available is 30” and maximum oversized height avail- able is 40 1/2” (See modification sections.• Drawer prep for plumbing modification is not available.
Vanity w/Center Drawer Stack72” Wide x 18” / 21” Deep
31” HIGH DRS DWRS SHLVSV721831SDC-3 4 3 0V722131SDC-3 4 3 034 1/2” HIGHV721834SDC-3 4 3 0V722134SDC-3 4 3 0
31"34 1/2"
72"
18"21"
• Top drawer in stack is operating.• One set of butt doors in each outside section.• Minimum reduced width available is 60”, minimum reduced depth available is 12”, and minimum reduced height available is 31”. Maximum oversized depth available is 30” and maximum oversized height avail- able is 40 1/2” (See modification sections.• Drawer prep for plumbing modification is not available.
Vanity with Full Height Doors and Side Drawers (L & R)18” / 21” Deep
18"21"
31"34 1/2"
48"54"57"60"72"
13"13"15"15"19"
13"13"15"15"19"
22"28"27"30"34"
• Top drawers in stacks are operating.• One set of full height butt doors in center section.• Minimum reduced width available is 48”, minimum reduced depth available is 12”, and minimum reduced height available is 31”. Maximum oversized depth available is 30” and maximum oversized height available is 40 1/2” • Drawer prep for plumbing modification is not available.
DRS DWRS SHLVS18” DEPTH X 31” HEIGHTVF481831SDLR 2 6 0VF541831SDLR 2 6 0VF571831SDLR 2 6 0VF601831SDLR 2 6 0VF721831SDLR 2 6 021” DEPTH X 31” HEIGHTVF482131SDLR 2 6 0VF542131SDLR 2 6 0VF572131SDLR 2 6 0VF602131SDLR 2 6 0VF722131SDLR 2 6 0
DRS DWRS SHLVS18” DEPTH X 34 1/2” HEIGHTVF481834SDLR 2 6 0VF541834SDLR 2 6 0VF571834SDLR 2 6 0VF601834SDLR 2 6 0VF721834SDLR 2 6 021” DEPTH X 34 1/2” HEIGHTVF482134SDLR 2 6 0VF542134SDLR 2 6 0VF572134SDLR 2 6 0VF602134SDLR 2 6 0VF722134SDLR 2 6 0
220
ROYAL SHEFFIELD Cabinetry Specification Guide
royalsheffieldcabinetry.comBath Cabinets: VanitiesB
ATH
CA
BIN
ETS
Vanity Sink Base Open31” High x 18” Deep
Vanity Sink Base Open34 1/2” High x 18” Deep
(L/R) = Specify L or R hinging. (BD) = Butt Doors. All BD cabinets wider than 36” will have a center stile
Vanity with Full Height Doorsand Center Drawer Stack
18” / 21” Deep
Vanity Sink Base Open31” High x 21” Deep
DRS DWRS SHLVSVSO301831 0 0 0VSO361831 0 0 0VSO421831 0 0 0VSO481831 0 0 0VSO541831 0 0 0VSO601831 0 0 0VSO721831 0 0 0
Vanity Sink Base Open34 1/2” High x 21” Deep
• Non operating drawer fronts.• Matching finish interior in open section.• Cut out width is 3” less than cabinet width.• Cabinet is not drilled for shelves.• Minimum reduced width available is 30”, minimum reduced depth available is 4”, and minimum reduced height available is 31”. Maximum oversized depth available is 30” and maximum oversized height avail- able is 40 1/2”
18” DEPTH DRS DWRS SHLVS18” DEPTH X 31” HEIGHTVF601831SDC-3 2 3 0VF721831SDC-3 2 3 021” DEPTH X 31” HEIGHTVF602131SDC-3 2 3 0VF722131SDC-3 2 3 018” DEPTH X 34 1/2” HEIGHTVF601834SDC-3 2 3 0VF721834SDC-3 2 3 021” DEPTH X 34 1/2” HEIGHTVF602134SDC-3 2 3 0VF722134SDC-3 2 3 0
60"72"
18"21"
31"34 1/2"
23 1/2"
23 1/2"
13"25"
• Top drawer in stack is operating.• One set of full height butt doors in each outside section.• Minimum reduced width available is 60”, minimum reduced depth available is 12”, and minimum reduced height available is 31”. Maximum oversized depth available is 30” and maximum oversized height avail- able is 40 1/2” (See modification sections.• Drawer prep for plumbing modification is not available.
DRS DWRS SHLVSVSO302131 0 0 0VSO362131 0 0 0VSO422131 0 0 0VSO482131 0 0 0VSO542131 0 0 0VSO602131 0 0 0VSO722131 0 0 0
• Non operating drawer fronts.• Matching finish interior in open section.• Cut out width is 3” less than cabinet width.• Cabinet is not drilled for shelves.• Minimum reduced width available is 30”, minimum reduced depth available is 4”, and minimum reduced height available is 31”. Maximum oversized depth available is 30” and maximum oversized height avail- able is 40 1/2”
DRS DWRS SHLVSVSO301834 0 0 0VSO361834 0 0 0VSO421834 0 0 0VSO481834 0 0 0VSO541834 0 0 0VSO601834 0 0 0VSO721834 0 0 0
• Non operating drawer fronts.• Matching finish interior in open section.• Cut out width is 3” less than cabinet width.• Cabinet is not drilled for shelves.• Minimum reduced width available is 30”, minimum reduced depth available is 4”, and minimum reduced height available is 31”. Maximum oversized depth available is 30” and maximum oversized height avail- able is 40 1/2”
18"21"
8"
20 9/16"
31"34 1/2"
30"36"42"48"54"60"72"
18"21"
8"
20 9/16"
31"34 1/2"
30"36"42"48"54"60"72"
18"21"
8"
20 9/16"
31"34 1/2"
30"36"42"48"54"60"72"
DRS DWRS SHLVSVSO302134 0 0 0VSO362134 0 0 0VSO422134 0 0 0VSO482134 0 0 0VSO542134 0 0 0VSO602134 0 0 0VSO722134 0 0 0
• Non operating drawer fronts.• Matching finish interior in open section.• Cut out width is 3” less than cabinet width.• Cabinet is not drilled for shelves.• Minimum reduced width available is 30”, minimum reduced depth available is 4”, and minimum reduced height available is 31”. Maximum oversized depth available is 30” and maximum oversized height avail- able is 40 1/2”
18"21"
8"
20 9/16"
31"34 1/2"
30"36"42"48"54"60"72"
221
ROYAL SHEFFIELD Cabinetry Specification Guide
royalsheffieldcabinetry.com Bath Cabinets: Vanities
BAT
H C
AB
INET
S
Vanity Open Inverted with Full Height Doors
18” / 21” Deep
(L/R) = Specify L or R hinging. (BD) = Butt Doors. All BD cabinets wider than 36” will have a center stile
• Doors hinged on outside stiles. One full depth shelf in each outside section. • Matching finish interior in open section. Open section is not drilled for shelves.• Center section has fixed floor 12 3/8” from bottom of cabinet. Clearance between drawer box and back of cabinet is 2 1/2”.• Minimum reduced width available is 48”, minimum reduced depth available is 12”, and minimum reduced height available is 31”. Maximum oversized depth available is 30” and maximum oversized height available is 40 1/2” (See modification sections.)• When using reduced width modification, only the center section will reduce in width.• Drawer prep for plumbing modification is not available.
22"28"30"34"
13"13"15"19"
13"13"15"19"
31"34 1/2"
18"21"
48"54"60"72"
DRS DWRS SHLVS18” DEPTH X 31” HEIGHTVOI481831FHD 2 1 2VOI541831FHD 2 1 2VOI601831FHD 2 1 2VOI721831FHD 2 1 221” DEPTH X 31” HEIGHTVOI482131FHD 2 1 2VOI542131FHD 2 1 2VOI602131FHD 2 1 2VOI722131FHD 2 1 218” DEPTH X 34 1/2” HEIGHTVOI481834FHD 2 1 2VOI541834FHD 2 1 2VOI601834FHD 2 1 2VOI721834FHD 2 1 221” DEPTH X 34 1/2” HEIGHTVOI482134FHD 2 1 2VOI542134FHD 2 1 2VOI602134FHD 2 1 2VOI722134FHD 2 1 2
Vanity Open Inverted -One Drawer Left & Right
18” / 21” Deep
Vanity Open Inverted -Side Drawers Left & Right
18” / 21” Deep18"21"
13"13"15"19"
13"13"15"19"
22"28"30"34"
48"54"60"72"
31"34 1/2"
13"13"15"19"
13"13"15"19"
22"28"30"34"
18"21"
48"54"60"72"
31"34 1/2"
• Doors hinged on outside stiles. One full depth shelf in each outside section. • Matching finish interior in open section. Open section is not drilled for shelves.• Center section has fixed floor 12 3/8” from bottom of cabinet. Clearance between drawer box and back of cabinet is 2 1/2”.• Minimum reduced width available is 48”, minimum reduced depth available is 12”, and minimum reduced height available is 31”. Maximum oversized depth available is 30” and maximum oversized height available is 40 1/2” (See modification sections.)• When using reduced width modification, only the center section will reduce in width.• Drawer prep for plumbing modification is not available.
DRS DWRS SHLVS18” DEPTH X 31” HEIGHTVOI481831-1DLR 2 3 2VOI541831-1DLR 2 3 2VOI601831-1DLR 2 3 2VOI721831-1DLR 2 3 221” DEPTH X 31” HEIGHTVOI482131-1DLR 2 3 2VOI542131-1DLR 2 3 2VOI602131-1DLR 2 3 2VOI722131-1DLR 2 3 218” DEPTH X 34 1/2” HEIGHTVOI481834-1DLR 2 3 2VOI541834-1DLR 2 3 2VOI601834-1DLR 2 3 2VOI721834-1DLR 2 3 221” DEPTH X 34 1/2” HEIGHTVOI482134-1DLR 2 3 2VOI542134-1DLR 2 3 2VOI602134-1DLR 2 3 2VOI722134-1DLR 2 3 2
• Doors hinged on outside stiles. One full depth shelf in each outside section. • Matching finish interior in open section. Open section is not drilled for shelves.• Center section has fixed floor 12 3/8” from bottom of cabinet. Clearance between drawer box and back of cabinet is 2 1/2”.• Top drawers in outside sections are operating.• Minimum reduced width available is 48”, minimum reduced depth available is 12”, and minimum reduced height available is 31”. Maximum oversized depth available is 30” and maximum oversized height available is 40 1/2” (See modification sections.)• When using reduced width modification, only the center section will reduce in width.• Drawer prep for plumbing modification is not available.
DRS DWRS SHLVS18” DEPTH X 31” HEIGHTVOI481831-3DLR 0 7 0VOI541831-3DLR 0 7 0VOI601831-3DLR 0 7 0VOI721831-3DLR 0 7 021” DEPTH X 31” HEIGHTVOI482131-3DLR 0 7 0VOI542131-3DLR 0 7 0VOI602131-3DLR 0 7 0VOI722131-3DLR 0 7 018” DEPTH X 34 1/2” HEIGHTVOI481834-3DLR 0 7 0VOI541834-3DLR 0 7 0VOI601834-3DLR 0 7 0VOI721834-3DLR 0 7 021” DEPTH X 34 1/2” HEIGHTVOI482134-3DLR 0 7 0VOI542134-3DLR 0 7 0VOI602134-3DLR 0 7 0VOI722134-3DLR 0 7 0
222
ROYAL SHEFFIELD Cabinetry Specification Guide
royalsheffieldcabinetry.comBath Cabinets: VanitiesB
ATH
CA
BIN
ETS
Vanity Sink Drawer Base - 334 1/2” High x 18” / 21” Deep
Vanity Sink Drawer Base - 631” High x 18” / 21” Deep
(L/R) = Specify L or R hinging. (BD) = Butt Doors. All BD cabinets wider than 36” will have a center stile
Vanity Sink Drawer Base - 331” High x 18” / 21” Deep
Vanity Sink Drawer Base - 634 1/2” High x 18” / 21” Deep
• Top drawer front is non-operating.• Middle drawer has prep for plumbing drawer box.• Bottom drawer has standard drawer box.• Suggested maximum sink bowl depth is 8” from top of cabinet.• Due to prep for plumbing drawer box, center of bowl must be center of cabinet width.• Minimum reduced width available is 21”, minimum reduced depth available is 18”, and minimum reduced height available is 31”. Maximum oversized depth available is 30” and maximum oversized height avail- able is 40 1/2” (See modification sections.
18” DEPTH DRS DWRS SHLVSVSD601831-6 0 4 0VSD721831-6 0 4 021” DEPTHVSD602131-6 0 4 0VSD722131-6 0 4 0
60"72"
18"21"
31"34 1/2"
18” DEPTH DRS DWRS SHLVSVSD241831-3 0 3 0VSD271831-3 0 3 0VSD301831-3 0 3 0VSD331831-3 0 3 0VSD361831-3 0 3 0VSD421831-3 0 3 0VSD481831-3 0 3 021” DEPTHVSD242131-3 0 3 0VSD272131-3 0 3 0VSD302131-3 0 3 0VSD332131-3 0 3 0VSD362131-3 0 3 0VSD422131-3 0 3 0VSD482131-3 0 3 0
• Top drawer front is non-operating.• Middle drawer has prep for plumbing drawer box.• Bottom drawer has standard drawer box.• Suggested maximum sink bowl depth is 8” from top of cabinet.• Due to prep for plumbing drawer box, center of bowl must be center of cabinet width.• Minimum reduced width available is 21”, minimum reduced depth available is 18”, and minimum reduced height available is 31”. Maximum oversized depth available is 30” and maximum oversized height avail- able is 40 1/2” (See modification sections.
18” DEPTH DRS DWRS SHLVSVSD241834-3 0 3 0VSD271834-3 0 3 0VSD301834-3 0 3 0VSD331834-3 0 3 0VSD361834-3 0 3 0VSD421834-3 0 3 0VSD481834-3 0 3 021” DEPTHVSD242134-3 0 3 0VSD272134-3 0 3 0VSD302134-3 0 3 0VSD332134-3 0 3 0VSD362134-3 0 3 0VSD422134-3 0 3 0VSD482134-3 0 3 0
18"21"
31"34 1/2"
24"27"30"33"36"42"48"
18"21"
31"34 1/2"
24"27"30"33"36"42"48"
• Top ide by side drawer fronts non-operating.• Middle drawers have prep for plumbing drawer boxes.• Bottom drawers have std. drawer boxes.• Suggested maximum sink bowl depth is 8” from top of cabinet.• Minimum reduced width available is 42”, minimum reduced depth available is 18”, and minimum reduced height available is 31”. Maximum oversized depth available is 30” and maximum oversized height avail- able is 40 1/2” (See modification sections.
18” DEPTH DRS DWRS SHLVSVSD601834-6 0 4 0VSD721834-6 0 4 021” DEPTHVSD602134-6 0 4 0VSD722134-6 0 4 0
60"72"
18"21"
31"34 1/2"
• Top side by side drawer fronts non-operating.• Middle drawers have prep for plumbing drawer boxes.• Bottom drawers have std. drawer boxes.• Suggested maximum sink bowl depth is 8” from top of cabinet.• Minimum reduced width available is 42”, minimum reduced depth available is 18”, and minimum reduced height available is 31”. Maximum oversized depth available is 30” and maximum oversized height avail- able is 40 1/2” (See modification sections.
223
ROYAL SHEFFIELD Cabinetry Specification Guide
royalsheffieldcabinetry.com Bath Cabinets: Vanities
BAT
H C
AB
INET
S
Vanity Sink Drawer Base - 2-434 1/2” High x 18” / 21” Deep
(L/R) = Specify L or R hinging. (BD) = Butt Doors. All BD cabinets wider than 36” will have a center stile
22"28"30"34"
13"13"15"19"
13"13"15"19"
31"34 1/2"
18"21"
48"54"60"72"
• Top full width drawer front is non-operating.• Second section is full width drawer with prep for plumbing drawer box.• Bottom four drawers have std. drawer box.• Suggested maximum sink bowl depth is 8” from top of cabinet.• Due to prep for plumbing drawer box, center of bowl must be center of cabinet width.• Minimum reduced width available is 30”, minimum reduced depth available is 18”, and minimum reduced height available is 32”. Maximum oversized depth available is 30” and maximum oversized height avail- able is 40 1/2” (See modification sections.• When using reduced height modification, height adjustment will be in bottom drawer section only.
18” DEPTH DRS DWRS SHLVSVSD301834-2-4 0 5 0VSD331834-2-4 0 5 0VSD361834-2-4 0 5 0VSD421834-2-4 0 5 0VSD481834-2-4 0 5 021” DEPTHVSD272134-2-4 0 5 0VSD302134-2-4 0 5 0VSD332134-2-4 0 5 0VSD362134-2-4 0 5 0VSD422134-2-4 0 5 0VSD482134-2-4 0 3 0
Vanity Base Inverted, 1 Door - 21” Deep
Vanity Base Inverted, 2 Doors - 21” Deep
21"24"
31"34 1/2"
21"24"27"30"
31"34 1/2"
• Drilled for full depth shelves. Shelves not included.• Fixed floor is 12 3/8” from bottom of cabinet. • 2 1/2” clearance between drawer box and the back of the cabinet.• Minimum reduced width available is 24”, minimum reduced depth available is 12”, and minimum reduced height available is 31”. Maximum oversized depth available is 30” and maximum oversized height available is 40 1/2” (See modification sections.)• Drawer prep for plumbing modification is not available.31” HEIGHT DRS DWRS SHLVSVBI242131-(L/R) 1 1 034 1/2” HEIGHTVBI242134-(L/R) 1 1 0
31” HEIGHT DRS DWRS SHLVSVBI242131-BD 2 1 0VBI272131-BD 2 1 0VBI302131-BD 2 1 034 1/2” HEIGHTVBI242134-BD 2 1 0VBI272134-BD 2 1 0VBI302134-BD 2 1 0
• Drilled for full depth shelves. Shelves not included.• Fixed floor is 12 3/8” from bottom of cabinet. • 2 1/2” clearance between drawer box and the back of the cabinet.• Minimum reduced width available is 24”, minimum reduced depth available is 12”, and minimum reduced height available is 31”. Maximum oversized depth available is 30” and maximum oversized height available is 40 1/2” (See modification sections.)• Drawer prep for plumbing modification is not available.
Vanity Base - 1 Door18” / 21” Deep
.• Minimum reduced width available is 9”, minimum reduced depth available is 12”, and minimum reduced height available is 31”. Maximum oversized depth available is 30” and maximum oversized height avail- able is 40 1/2” (See modification sections.
DRS DWRS SHLVS18” DEPTH X 31” HEIGHTVB121831-(L/R) 1 1 1VB151831-(L/R) 1 1 1VB181831-(L/R) 1 1 1VB211831-(L/R) 1 1 1VB241831-(L/R) 1 1 121” DEPTH X 31” HEIGHTVB122131-(L/R) 1 1 1VB152131-(L/R) 1 1 1VB182131-(L/R) 1 1 1VB212131-(L/R) 1 1 1VB242131-(L/R) 1 1 118” DEPTH X 34 1/2” HEIGHTVB121834-(L/R) 1 1 1VB151834-(L/R) 1 1 1VB181834-(L/R) 1 1 1VB211834-(L/R) 1 1 1VB241834-(L/R) 1 1 121” DEPTH X 34 1/2” HEIGHTVB122134-(L/R) 1 1 1VB152134-(L/R) 1 1 1VB182134-(L/R) 1 1 1VB212134-(L/R) 1 1 1VB242134-(L/R) 1 1 1
18"21"
18"21"
31"34 1/2"
31"34 1/2"
24"27"30"
12"15"18"21"24"
224
ROYAL SHEFFIELD Cabinetry Specification Guide
royalsheffieldcabinetry.comBath Cabinets: VanitiesB
ATH
CA
BIN
ETS
Vanity Base - Full Height Door18” / 21” Deep
Vanity Base - 2 Full Ht. Doors18” / 21” Deep
(L/R) = Specify L or R hinging. (BD) = Butt Doors. All BD cabinets wider than 36” will have a center stile
Vanity Base - 2 Doors18” / 21” Deep
• Full depth adjustable shelf.• Minimum reduced width available is 6”, minimum reduced depth available is 4”, and minimum reduced height available is 31”. Maximum oversized depth available is 30” and maximum oversized height avail- able is 40 1/2” (See modification sections.
DRS DWRS SHLV18” DEPTH X 31” HEIGHTVB121831FHD-(L/R) 1 0 1VB151831FHD-(L/R) 1 0 1VB181831FHD-(L/R) 1 0 1VB211831FHD-(L/R) 1 0 1VB241831FHD-(L/R) 1 0 121” DEPTH X 31” HEIGHTVB122131FHD-(L/R) 1 0 1VB152131FHD-(L/R) 1 0 1VB182131FHD-(L/R) 1 0 1VB212131FHD-(L/R) 1 0 1VB242131FHD-(L/R) 1 0 118” DEPTH X 34 1/2” HEIGHTVB121834FHD-(L/R) 1 0 1VB151834FHD-(L/R) 1 0 1VB181834FHD-(L/R) 1 0 1VB211834FHD-(L/R) 1 0 1VB241834FHD-(L/R) 1 0 121” DEPTH X 34 1/2” HEIGHTVB122134FHD-(L/R) 1 0 1VB152134FHD-(L/R) 1 0 1VB182134FHD-(L/R) 1 0 1VB212134FHD-(L/R) 1 0 1VB242134FHD-(L/R) 1 0 1
18"21"
18"21"
31"34 1/2"
31"34 1/2"
24"27"30"
12"15"18"21"24"
.• Minimum reduced width available is 9”, minimum reduced depth available is 12”, and minimum reduced height available is 31”. Maximum oversized depth available is 30” and maximum oversized height avail- able is 40 1/2” (See modification sections.
DRS DWRS SHLVS18” DEPTH X 31” HEIGHTVB2421831-BD 2 1 1VB2721831-BD 2 1 1VB3021831-BD 2 1 121” DEPTH X 31” HEIGHTVB2422131-BD 2 1 1VB2722131-BD 2 1 1VB3022131-BD 2 1 118” DEPTH X 34 1/2” HEIGHTVB2421834-BD 2 1 1VB2721834-BD 2 1 1VB3021834-BD 2 1 121” DEPTH X 34 1/2” HEIGHTVB2422134-BD 2 1 1VB2722134-BD 2 1 1VB3022134-BD 2 1 1
18"21"24"
31"34 1/2"
12"15"18"21"24"27"30"
• Full depth adjustable shelf.• Minimum reduced width available is 6”, minimum reduced depth available is 4”, and minimum reduced height available is 31”. Maximum oversized depth available is 30” and maximum oversized height avail- able is 40 1/2” (See modification sections.
DRS DWRS SHLV18” DEPTH X 31” HEIGHTVB241831FHD-BD 2 0 1VB271831FHD-BD 2 0 1VB301831FHD-BD 2 0 121” DEPTH X 31” HEIGHTVB242131FHD-BD 2 0 1VB272131FHD-BD 2 0 1VB302131FHD-BD 2 0 118” DEPTH X 34 1/2” HEIGHTVB241834FHD-BD 2 0 1VB271834FHD-BD 2 0 1VB301834FHD-BD 2 0 121” DEPTH X 34 1/2” HEIGHTVB242134FHD-BD 2 0 1VB272134FHD-BD 2 0 1VB302134FHD-BD 2 0 1
225
ROYAL SHEFFIELD Cabinetry Specification Guide
royalsheffieldcabinetry.com Bath Cabinets: Vanities
BAT
H C
AB
INET
S
Vanity Drawer Base18” / 21” Deep
(L/R) = Specify L or R hinging. (BD) = Butt Doors. All BD cabinets wider than 36” will have a center stile
• Minimum reduced width available is 9”, minimum reduced depth available is 128”, and minimum reduced height available is 31”. Maximum oversized depth available is 30” and maximum oversized height avail- able is 40 1/2” (See modification sections.
31"34 1/2"
18"21"24"
12", 15", 18", 21"24", 27", 30"
DRS DWRS SHLV18” DEPTH X 31” HEIGHTVDB121831-3 0 3 0VDB151831-3 0 3 0VDB181831-3 0 3 0VDB211831-3 0 3 0VDB241831-3 0 3 0VDB271831-3 0 3 0VDB301831-3 0 3 021” DEPTH X 31” HEIGHTVDB122131-3 0 3 0VDB152131-3 0 3 0VDB182131-3 0 3 0VDB212131-3 0 3 0VDB242131-3 0 3 0VDB272131-3 0 3 0VDB302131-3 0 3 018” DEPTH X 34 1/2” HEIGHTVDB121834-3 0 3 0VDB151834-3 0 3 0VDB181834-3 0 3 0VDB211834-3 0 3 0VDB241834-3 0 3 0VDB271834-3 0 3 0VDB301834-3 0 3 021” DEPTH X 34 1/2” HEIGHTVDB122134-3 0 3 0VDB152134-3 0 3 0VDB182134-3 0 3 0VDB212134-3 0 3 0VDB242134-3 0 3 0VDB272134-3 0 3 0VDB302134-3 0 3 0
Vanity Waste Basket, Single 31” High x 21” Deep
15"18"
31"
21"
• (1) 35 quart basket, mounted within routed lid 10” high pull out.• Door is attached to the pull out. • Maximum depth is 30”. (See modification sections.)• Soft close door feature is not available.• Reduced width, reduced depth, and reduced height modifications are not available.
DRS DWRS SHLVVWB152131FHD 1 0 0VWB182131FHD 1 0 0
• (1) 35 quart basket, mounted within routed lid 10” high pull out.• Door is attached to the pull out. • Horizontal partition separates drawer and waste bin section.• Maximum depth is 30”. (See modification sections.)• Soft close door feature is not available.• Reduced width, reduced depth, and reduced height modifications are not available.
DRS DWRS SHLVVWB152134 1 0 0VWB182134 1 0 0
Vanity Waste Basket, Single 34 1/2” High x 21” Deep
21"
34 1/2"
15"18"
Vanity Storage Organizer Pull Out
21"
12"
31"34 1/2"
• Storage organizer pull out features adjustable shelves with non-skid vinyl liners and clear polycarbonate storage trays.• Pull out glides are “tri-slides” that reduce side-to-side motion and provide complete stability. • Door is attached to pull-out• Shelves are accessible from both sides.• Size modifications are not available.• Soft close door modification not available.
DRS DWRS SHLVVSOPO122131 1 0 3VSOPO122134 1 0 4
Vanity Grooming Organizer Pull Out
21"
12"
31"34 1/2"
• Grooming organizer pull out features adjustable shelves with non-skid vinyl liners and clear polycarbonate storage trays. Two stainless steel bins are recessed into the top shelf.• Pull out glides are “tri-slides” that reduce side-to-side motion and provide complete stability. • Door is attached to pull-out.• Size modifications are not available.• Soft close door modification not available.
DRS DWRS SHLVVGOPO122131 1 0 2VGOPO122134 1 0 3
Pull out shown for 34 1/2” High unit.Pull out for 31” High unit will not have the additional center shelf.
226
ROYAL SHEFFIELD Cabinetry Specification Guide
royalsheffieldcabinetry.comBath Cabinets: VanitiesB
ATH
CA
BIN
ETS
Vanity Furniture Sink31” High x 18” / 21” Deep
Vanity Furniture Sink34 1/2” High x 18” / 21” Deep
(L/R) = Specify L or R hinging. (BD) = Butt Doors. All BD cabinets wider than 36” will have a center stile
Vanity Hamper Base
• Drawer front is non-operating.• No cabinet floor.• Back of cabinet is not finished.• Slatted shelf is located 4” from floor.• Minimum reduced width available is 21”, minimum reduced depth available is 12”, and minimum reduced height available is 28 1/4”. Maximum oversized depth avail- able is 30” and maximum oversized height available is 40 1/2” (See modification sections.• When using reduced height modification, height will only be adjusted within open area, not cabinet box height.• Furniture board construction modification is not available.
DESIGN TIPUsing the above units with the Sojourn bath units is not recommended due to the vast construction differences in the two.
18” DEPTH DRS DWRS SHLVSVFS241831 0 0 0VFS271831 0 0 0VFS301831 0 0 0VFS331831 0 0 0VFS361831 0 0 021” DEPTHVFS242131 0 0 0VFS272131 0 0 0VFS302131 0 0 0VFS332131 0 0 0VFS362131 0 0 0
21"
18"
31"34 1/2"
• Floor mounted pull out with removable 60 qt. plastic hamper.• Hamper dimensions: 13 1/2”w x 18 3/4”d x 18 1/2”h. • Reduced width, reduced depth, and reduced height modifications are not available.• Maximum oversized depth available is 30” and maximum oversized height avail- able is 40 1/2” • Inset overlays are not available.
DRS DWRS SHLVVHB182131-(L/R) 1 0 0VHB182134-(L/R) 1 0 0
• Drawer front is non-operating.• No cabinet floor.• Back of cabinet is not finished.• Slatted shelf is located 4” from floor.• Minimum reduced width available is 21”, minimum reduced depth available is 12”, and minimum reduced height available is 28 1/4”. Maximum oversized depth avail- able is 30” and maximum oversized height available is 40 1/2” (See modification sections.• When using reduced height modification, height will only be adjusted within open area, not cabinet box height.• Furniture board construction modification is not available.
DESIGN TIPUsing the above units with the Sojourn bath units is not recommended due to the vast construction differences in the two.
18” DEPTH DRS DWRS SHLVSVFS241834 0 0 0VFS271834 0 0 0VFS301834 0 0 0VFS331834 0 0 0VFS361834 0 0 021” DEPTHVFS242134 0 0 0VFS272134 0 0 0VFS302134 0 0 0VFS332134 0 0 0VFS362134 0 0 0
15"18"21"24"27"
24"27"30"33"36"
31"34 1/2"
13 1/2"17"
18", 21"24", 27", 30"
33", 36"
1 1/2" 1 1/2"
12"
3"4"
3"
15"18"21"24"27"
24"27"30"33"36"
31"34 1/2"
13 1/2"17"
18", 21"24", 27", 30"
33", 36"
1 1/2" 1 1/2"
12"
3"4"
3"
227
ROYAL SHEFFIELD Cabinetry Specification Guide
royalsheffieldcabinetry.com Bath Cabinets: Vanities
BAT
H C
AB
INET
S
Vanity Furniture Sink w/Side Drawers Left & Right
18” / 21” Deep
(L/R) = Specify L or R hinging. (BD) = Butt Doors. All BD cabinets wider than 36” will have a center stile
• Drawer front is non-operating.• No cabinet floor.• Back of cabinet is not finished.• Slatted shelf is located 4” from floor.• Minimum reduced width available is 21”, minimum reduced depth available is 12”, and minimum reduced height available is 28 1/4”. Maximum oversized depth avail- able is 30” and maximum oversized height available is 40 1/2” (See modification sections.• When using reduced height modification, height will only be adjusted within open area, not cabinet box height.• Furniture board construction modification is not available.
DESIGN TIPUsing the above units with the Sojourn bath units is not recommended due to the vast construction differences in the two.
31"34 1/2"
13 1/2"17"
1 1/2" 1 1/2"
12"
3"3"4"
42"48"
1 1/2"1 1/2"
6"9"18"
18", 21"
42"48"
6"9"
DRS DWRS SHLVS18” DEPTH x 31” HEIGHTVFS421831SDLR 0 2 0VFS481831SDLR 0 2 021” DEPTH x 31” HEIGHTVFS422131SDLR 0 2 0VFS482131SDLR 0 2 018” DEPTH x 34 1/2” HEIGHTVFS421834SDLR 0 2 0VFS481834SDLR 0 2 021” DEPTH x 34 1/2” HEIGHTVFS422134SDLR 0 2 0VFS482134SDLR 0 2 0
Vanity Furniture Sink Drawer Center 18” / 21” Deep
31"34 1/2"
13 1/2"17"
60", 72"
18", 21"
60"72"
9"21"
3" 3"
3"3"
1 1/2" 1 1/2"18"18"
4"
12"
Vanity Furniture Sink w/Side Drawers Left & Right
18” / 21” Deep
• Drawer front is non-operating.• No cabinet floor.• Back of cabinet is not finished.• Slatted shelf is located 4” from floor.• Minimum reduced width available is 21”, minimum reduced depth available is 12”, and minimum reduced height available is 28 1/4”. Maximum oversized depth avail- able is 30” and maximum oversized height available is 40 1/2” (See modification sections.• When using reduced height modification, height will only be adjusted within open area, not cabinet box height.• Furniture board construction modification is not available.
DESIGN TIPUsing the above units with the Sojourn bath units is not recommended due to the vast construction differences in the two.
13 1/2"17"
31"34 1/2"
1 1/2"1 1/2"
18", 21"
3" 3"
12"18"
12"18"21"
60", 72"
60"72"
12"
3"3"
4"
DRS DWRS SHLVS18” DEPTH x 31” HEIGHTVFS601831SDLR 0 2 0VFS721831SDLR 0 2 021” DEPTH x 31” HEIGHTVFS602131SDLR 0 2 0VFS722131SDLR 0 2 018” DEPTH x 34 1/2” HEIGHTVFS601834SDLR 0 2 0VFS721834SDLR 0 2 021” DEPTH x 34 1/2” HEIGHTVFS602134SDLR 0 2 0VFS722134SDLR 0 2 0
• Side drawer fronts are non-operating.• No cabinet floor.• Back of cabinet is not finished.• Slatted shelf is located 4” from floor.• Minimum reduced width available is 60”, minimum reduced depth available is 18”, and minimum reduced height available is 28 1/4”. Maximum oversized depth avail- able is 30” and maximum oversized height available is 40 1/2” (See modification sections.• When using reduced height modification, height will only be adjusted within open area, not cabinet box height.• Furniture board construction modification is not available.
DESIGN TIPUsing the above units with the Sojourn bath units is not recommended due to the vast construction differences in the two.
DRS DWRS SHLVS18” DEPTH x 31” HEIGHTVFS601831DC 0 1 0VFS721831DC 0 1 021” DEPTH x 31” HEIGHTVFS602131DC 0 1 0VFS722131DC 0 1 018” DEPTH x 34 1/2” HEIGHTVFS601834DC 0 1 0VFS721834DC 0 1 021” DEPTH x 34 1/2” HEIGHTVFS602134DC 0 1 0VFS722134DC 0 1 0
228
ROYAL SHEFFIELD Cabinetry Specification Guide
royalsheffieldcabinetry.comBath Cabinets: LinenB
ATH
CA
BIN
ETS
Linen Cabinet - 4 Doors18” / 21” Deep
Desk Linen with One Drawer84” High x 18”/21” Deep
(L/R) = Specify L or R hinging. (BD) = Butt Doors. All BD cabinets wider than 36” will have a center stile
Linen Cabinet - 2 Doors18” / 21” Deep
• Top and bottom panels on large doors will always be square re- gardless of door style.• Full depth adjustable shelves. • Additional shelves may be ordered. See accessories section.• Minimum reduced width available is 9”, min. reduced depth available is 4”, and min. reduced height available is 72”. Max. oversized depth available is 30”.
DRS DWRS SHLVS18” DEPTH X 84” HEIGHTLN158418-(L/R) 2 0 4LN188418-(L/R) 2 0 4LN218418-(L/R) 2 0 4LN248418-(L/R) 2 0 421” DEPTH X 84” HEIGHTLN158421-(L/R) 2 0 4LN188421-(L/R) 2 0 4LN218421-(L/R) 2 0 4LN248421-(L/R) 2 0 418” DEPTH X 90” HEIGHTLN159018-(L/R) 2 0 4LN189018-(L/R) 2 0 4LN219018-(L/R) 2 0 4LN249018-(L/R) 2 0 421” DEPTH X 90” HEIGHTLN159621-(L/R) 2 0 4LN189621-(L/R) 2 0 4LN219621-(L/R) 2 0 4LN249621-(L/R) 2 0 418” DEPTH X 96” HEIGHTLN159618-(L/R) 2 0 5LN189618-(L/R) 2 0 5LN219618-(L/R) 2 0 5LN249618-(L/R) 2 0 521” DEPTH X 96” HEIGHTLN159621-(L/R) 2 0 5LN189621-(L/R) 2 0 5LN219621-(L/R) 2 0 5LN249621-(L/R) 2 0 5
DRS DWRS SHLVS18” DEPTH X 84” HEIGHTLN248418-BD 4 0 4LN308418-BD 4 0 4LN368418-BD 4 0 421” DEPTH X 84” HEIGHTLN248421-BD 4 0 4LN308421-BD 4 0 4LN368421-BD 4 0 418” DEPTH X 90” HEIGHTLN249018-BD 4 0 4LN309018-BD 4 0 4LN369018-BD 4 0 421” DEPTH X 90” HEIGHTLN249021-BD 4 0 4LN309021-BD 4 0 4LN369021-BD 4 0 418” DEPTH X 96” HEIGHTLN249618-BD 4 0 5LN309618-BD 4 0 5LN369618-BD 4 0 521” DEPTH X 96” HEIGHTLN249621-BD 4 0 5LN309621-BD 4 0 5LN369621-BD 4 0 5
18"21"24"
30"36"
84"87"90"93"96"102"108"
84"87"90"93"96"102"108"
18"21"
15"18"21"24"
84”90”96”
• Top and bottom panels on large doors will always be square regardless 0f door style.• Full depth adjustable shelves. • Additional shelves may be ordered. See accessories section.• Minimum reduced width available is 9”, min. reduced depth available is 4”, and min. reduced height available is 72”. Maximum oversized depth available is 30”.
18"21"24"
30"36"
84"87"90"93"96"102"108"
84"87"90"93"96"102"108"
18"21"
15"18"21"24"
84”90”96”
• Bottom panel on large door will be square.• Full depth adjustable shelves. • Drawer aligns with a standard 31” high vanity base.• Toe kick is attached, if loose toe kick platform is preferred, must specify. (See modifications section).• Minimum reduced width available is 9”, min. reduced depth available is 12”, and min. reduced height available is 72”. Maximum oversized depth available is 30”.• When using reduced height modification, height will only be reduced in upper section.
DRS DWRS SHLV18” DEPTH X 84” HEIGHTDL1D158418-(L/R) 2 1 4DL1D188418-(L/R) 2 1 4DL1D218418-(L/R) 2 1 4DL1D248418-(L/R) 2 1 421” DEPTH X 84” HEIGHTDL1D158421-(L/R) 2 1 4DL1D188421-(L/R) 2 1 4DL1D218421-(L/R) 2 1 4DL1D248421-(L/R) 2 1 4
84"87"90"93"96"
31"
15"18"21"24"
18"21"24"
84”
229
ROYAL SHEFFIELD Cabinetry Specification Guide
royalsheffieldcabinetry.com Bath Cabinets: Linen
BAT
H C
AB
INET
S
Desk Linen with One Drawer90”/96” High x 18”/21” Deep
(L/R) = Specify L or R hinging. (BD) = Butt Doors. All BD cabinets wider than 36” will have a center stile
• Bottom panel on large door will be square.• Full depth adjustable shelves. • Drawer aligns with a standard 31” high vanity base.• Toe kick is attached, if loose toe kick platform is preferred, must specify. (See modifications section).• Minimum reduced width available is 9”, min. reduced depth available is 12”, and min. reduced height available is 72”. Maximum oversized depth available is 30”.• When using reduced height modification, height will only be reduced in upper section.
DRS DWRS SHLV18” DEPTH X 90” HEIGHTDL1D159018-(L/R) 2 1 4DL1D189018-(L/R) 2 1 4DL1D219018-(L/R) 2 1 4DL1D249018-(L/R) 2 1 421” DEPTH X 90” HEIGHTDL1D159021-(L/R) 2 1 4DL1D189021-(L/R) 2 1 4DL1D219021-(L/R) 2 1 4DL1D249021-(L/R) 2 1 418” DEPTH X 96” HEIGHTDL1D159618-(L/R) 2 1 5DL1D189618-(L/R) 2 1 5DL1D219618-(L/R) 2 1 5DL1D249618-(L/R) 2 1 521” DEPTH X 96” HEIGHTDL1D159621-(L/R) 2 1 5DL1D189621-(L/R) 2 1 5DL1D219621-(L/R) 2 1 5DL1D249621-(L/R) 2 1 5
84"87"90"93"96"
31"
15"18"21"24"
18"21"24"
90”96”
Furniture Linen w/One Drawer84” High x 18”/21” Deep
Furniture Linen w/One Drawer90”/96” High x 18”/21” Deep
• Bottom panel on large door will be square.• Full depth adjustable shelves. • Drawer aligns with a standard 34 1/2” high vanity base.• Toe kick is attached, if loose toe kick platform is preferred, must specify. (See modifications section).• Minimum reduced width available is 9”, min. reduced depth available is 12”, and min. reduced height available is 72”. Maximum oversized depth available is 30”.• When using reduced height modification, height will only be reduced in upper section.
DRS DWRS SHLV18” DEPTH X 84” HEIGHTFL1D158418-(L/R) 2 1 4FL1D188418-(L/R) 2 1 4FL1D218418-(L/R) 2 1 4FL1D248418-(L/R) 2 1 421” DEPTH X 84” HEIGHTFL1D158421-(L/R) 2 1 4FL1D188421-(L/R) 2 1 4FL1D218421-(L/R) 2 1 4FL1D248421-(L/R) 2 1 4
• Bottom panel on large doors will be square.• Full depth adjustable shelves. • Drawer aligns with a standard 34 1/2” high vanity base.• Toe kick is attached, if loose toe kick platform is preferred, must specify. (See modifications section).• Minimum reduced width available is 9”, min. reduced depth available is 12”, and min. reduced height available is 72”. Maximum oversized depth available is 30”.• When using reduced height modification, height will only be reduced in upper section.
DRS DWRS SHLV18” DEPTH X 90” HEIGHTFL1D159018-(L/R) 2 1 4FL1D189018-(L/R) 2 1 4FL1D219018-(L/R) 2 1 4FL1D249018-(L/R) 2 1 421” DEPTH X 90” HEIGHTFL1D159021-(L/R) 2 1 4FL1D189021-(L/R) 2 1 4FL1D219021-(L/R) 2 1 4FL1D249021-(L/R) 2 1 418” DEPTH X 96” HEIGHTFL1D159618-(L/R) 2 1 5FL1D189618-(L/R) 2 1 5FL1D219618-(L/R) 2 1 5FL1D249618-(L/R) 2 1 521” DEPTH X 96” HEIGHTFL1D159621-(L/R) 2 1 5FL1D189621-(L/R) 2 1 5FL1D219621-(L/R) 2 1 5FL1D249621-(L/R) 2 1 5
84"87"90"93"96"
34 1/2"
18"21"24"
15"18"21"24"
84”
84"87"90"93"96"
34 1/2"
18"21"24"
15"18"21"24"
90”96”
230
ROYAL SHEFFIELD Cabinetry Specification Guide
royalsheffieldcabinetry.comBath Cabinets: LinenB
ATH
CA
BIN
ETS
Desk Linen w/Three Drawers18” / 21” Deep
DRS DWRS SHLV18” DEPTH X 84” HEIGHTDL3D188418-(L/R) 1 3 3DL3D218418-(L/R) 1 3 3DL3D248418-(L/R) 1 3 321” DEPTH X 84” HEIGHTDL3D188421-(L/R) 1 3 3DL3D218421-(L/R) 1 3 3DL3D248421-(L/R) 1 3 318” DEPTH X 90” HEIGHTDL3D189018-(L/R) 1 3 3DL3D219018-(L/R) 1 3 3DL3D249018-(L/R) 1 3 321” DEPTH X 90” HEIGHTDL3D189021-(L/R) 1 3 3DL3D219021-(L/R) 1 3 3DL3D249021-(L/R) 1 3 318” DEPTH X 96” HEIGHTDL3D189621-(L/R) 1 3 4DL3D219621-(L/R) 1 3 4DL3D249621-(L/R) 1 3 421” DEPTH X 96” HEIGHTDL3D189621-(L/R) 1 3 4DL3D219621-(L/R) 1 3 4DL3D249621-(L/R) 1 3 4
• Bottom panel on large doors will be square.• Full depth adjustable shelves. • Drawer aligns with a standard 31” high vanity drawer base.• Minimum reduced width available is 9”, min. reduced depth available is 12”, and min. reduced height available is 72”. Maximum oversized depth available is 30”.• When using reduced height modification, height will only be reduced in upper section.
84"87"90"93"96"
31"
18", 21", 24"18", 21"
84”90”96”
Furniture Linen with 3 Drawers18” / 21” Deep
DRS DWRS SHLV18” DEPTH X 84” HEIGHTFL3D188418-(L/R) 1 3 3FL3D218418-(L/R) 1 3 3FL3D248418-(L/R) 1 3 321” DEPTH X 84” HEIGHTFL3D188421-(L/R) 1 3 3FL3D218421-(L/R) 1 3 3FL3D248421-(L/R) 1 3 318” DEPTH X 90” HEIGHTFL3D189018-(L/R) 1 3 3FL3D219018-(L/R) 1 3 3FL3D249018-(L/R) 1 3 321” DEPTH X 90” HEIGHTFL3D189021-(L/R) 1 3 3FL3D219021-(L/R) 1 3 3FL3D249021-(L/R) 1 3 318” DEPTH X 96” HEIGHTFL3D189621-(L/R) 1 3 4FL3D219621-(L/R) 1 3 4FL3D249621-(L/R) 1 3 421” DEPTH X 96” HEIGHTFL3D189621-(L/R) 1 3 4FL3D219621-(L/R) 1 3 4FL3D249621-(L/R) 1 3 4
• Bottom panel on large doors will be square.• Full depth adjustable shelves. • Drawer aligns with a standard 34 1/2” high vanity drawer base.• Minimum reduced width available is 9”, min. reduced depth available is 12”, and min. reduced height available is 72”. Maximum oversized depth available is 30”.• When using reduced height modification, height will only be reduced in upper section.
84"87"90"93"96"
18", 21"
34 1/2"
18", 21", 24"
84”90”96”
(L/R) = Specify L or R hinging. (BD) = Butt Doors. All BD cabinets wider than 36” will have a center stile
231
ROYAL SHEFFIELD Cabinetry Specification Guide
royalsheffieldcabinetry.com Bath Cabinets: Linen
BAT
H C
AB
INET
S
Desk Linen with Stacked Drawers & Hamper
21” Deep
Furniture Linen with Stacked Drawers & Hamper
21” Deep
• Full depth adjustable shelves. • Bottom drawer aligns with a standard 31” high vanity base.• Floor mounted pull out with removable 60 qt. plastic hamper.• Hamper dimensions: 13 1/2”w x 18 3/4”d x 18 1/2”h.• Raised panel drawer fronts are not available.• Inset overlays are not available.• Reduced width, reduced depth, and over- sized height modifications are not available• Minimum reduced height available is 72”. Maximum oversized depth available is 30”.• When using reduced height modification, height will only be reduced in upper section.
84” HEIGHT DRS DWRS SHLVDLSDH188421-(L/R)
2 3 2
90” HEIGHTDLSDH189021-(L/R)
2 3 2
96” HEIGHTDLSDH189621-(L/R)
2 3 3
31"
18"21", 24"
84"87"90"93"96"102"108"
84”90”96”
• Full depth adjustable shelves. • Bottom drawer aligns with a standard 34 1/2” high vanity base.• Floor mounted pull out with removable 60 qt. plastic hamper.• Hamper dimensions: 13 1/2”w x 18 3/4”d x 18 1/2”h.• Raised panel drawer fronts are not available.• Inset overlays are not available.• Reduced width, reduced depth, and over- sized height modifications are not available• Minimum reduced height available is 72”. Maximum oversized depth available is 30”.• When using reduced height modification, height will only be reduced in upper section.
84” HEIGHT DRS DWRS SHLVFLSDH188421-(L/R)
2 3 2
90” HEIGHTFLSDH189021-(L/R)
2 3 2
96” HEIGHTFLSDH189621-(L/R)
2 3 3
84"87"90"93"96"102"108"
21", 24"
34 1/2"
18"
84”90”96”
(L/R) = Specify L or R hinging. (BD) = Butt Doors. All BD cabinets wider than 36” will have a center stile
232
ROYAL SHEFFIELD Cabinetry Specification Guide
royalsheffieldcabinetry.comBath Cabinets: Passage Bath Collection - AB
ATH
CA
BIN
ETS
Vanity Sink Base
31” HEIGHT DRS DWRS SHLVGDA-V242131-BD 2 0 0GDA-V302131-BD 2 0 0GDA-V362131-BD 2 0 0GDA-V422131 2 0 0GDA-V482131 2 0 034 1/2” HEIGHTGDA-V242134-BD 2 0 0GDA-V302134-BD 2 0 0GDA-V362134-BD 2 0 0GDA-V422134 2 0 0GDA-V482134 2 0 0
Passage Collection - Version A
• False full width drawer front.• Drawer front will align with top drawer front of GDA-vanity Stacked Drawer-3 of equal height. • Butt doors standard on widths 24” thru 36”, as indicated by -BD.• Widths 42” and greater will have a center stile and not butt doors.• Modifications available: no moulding left, no moulding right, no moulding either side, and size dimension modifications.• Minimum reduced width available is 24”. Minimum reduced depth available is 12”, and maximum oversized depth available is 30”. Minimum reduced height is 27” and maximum oversized height is 40 1/2”.
NOTE: Styling package GAPKG1 must be selected with each item ordered.
24"30"36"42"48"
21"
31"34 1/2"
21 3/4"With Trim
25 1/2" 31 1/2"37 1/2"43 1/2"49 1/2"
With Trim
4 3/4"
Drawer Bottom:1/4” Captive Plywood
Cabinetry Features:
Prep for Plumbing Drawer Box12"
8"
Detail of Prep for Plumbing
Drawer Box
Corner Block:3/4” Solid Wood
Side:Flush Finished
Cabinet Side:3/4” Plywood with Wood Veneered Interior
Toe Board:Finished 3/4” plywood
4” high, positioned 6” back from front of face frame
Base Moulding:4 3/4” high moulding will wrap around base of cabinet with valance cut out.
Styling Package GAPKG1 (shown above) = PS-AH 4 3/4” high moulding wraps around base of cabinet with VAL-H valance cut out on front.
Vanity Base
Drawer Base Linen
• Modifications are available, at no additional cost, to remove mouldings from sides to allow placing of units together or against a wall: MBNML = No moulding on left MBNMR = No moulding on right MBNMB = No moulding on either side
(L/R) = Specify L or R hinging. (BD) = Butt Doors. All BD cabinets wider than 36” will have a center stile
233
ROYAL SHEFFIELD Cabinetry Specification Guide
royalsheffieldcabinetry.com Bath Cabinets: Passage Bath Collection - A
BAT
H C
AB
INET
S
Vanity with 3 Full Height Doors Vanity Stacked Drawers - 3
• Doors are not equally sized in width. • Two (2) full height vertical partitions divide door sections.• Left and right doors are hinged on outside stiles. Center door hinging is indicated by -L (door hinged left) and -R (door hinged right).• One (1) full depth adjustable shelf in each outside section. No shelf in center section.• Modifications available: no moulding left, no moulding right, no moulding either side, and size dimension modifications.• Minimum reduced width available is 42”. Minimum reduced depth available is 12”, and maximum oversized depth available is 30”. Minimum reduced height is 27” and maximum oversized height is 40 1/2”.• When using reduced width modification on tnis unit, the width will be adjusted equally between the two outside sections.
NOTE: Styling package GAPKG1 must be selected with each item ordered.
Vanity with Full Height Doors
• All cabinets have butt doors, as indicated by -BD.• Widths 60” and greater will have a center stile in center of face frame.• Cabinet is not drilled for shelves. • Modifications available: no moulding left, no moulding right, no moulding either side, and size dimension modifications.• Minimum reduced width available is 24”. Minimum reduced depth available is 12”, and maximum oversized depth available is 30”. Minimum reduced height is 27” and maximum oversized height is 40 1/2”.
NOTE: Styling package GAPKG1 must be selected with each item ordered.
• Drawer front heights are equally sized. • Top drawer front is full width non-operating.• Middle drawer is Prep for Plumbing drawer box.• Bottom drawer is standard drawer box• Due to Prep for Plumbing drawer box, center of bowl will be center of cabinet width.• Modifications available: no moulding left, no moulding right, no moulding either side, and size dimension modifications.• Minimum reduced width available is 21”. Minimum reduced depth available is 18”, and maximum oversized depth available is 30”. Minimum reduced height is 27” and maximum oversized height is 40 1/2”.• When using reduced or oversized height modifications on this unit, the drawer front heights will remain equally sized.
NOTE: Styling package GAPKG1 must be selected with each item ordered.
(L/R) = Specify L or R hinging. (BD) = Butt Doors. All BD cabinets wider than 36” will have a center stile
31” HEIGHT DRS DWRS SHLVGDA-VFH242131-BD
2 0 0
GDA-VFH302131-BD
2 0 0
GDA-VFH362131-BD
2 0 0
GDA-V422131 4 0 0GDA-V482131 4 0 034 1/2” HEIGHTGDA-VFH242134-BD
2 0 0
GDA-VFH302134-BD
2 0 0
GDA-VFH362134-BD
2 0 0
GDA-V422134 4 0 0GDA-V482134 4 0 0
21"
31"34 1/2"
25 1/2" 31 1/2"37 1/2"
With Trim
4 3/4"
21 3/4"
With Trim
24"30"36"
60"72"
31"34 1/2"
21 3/4"With Trim
61 1/2"73 1/2"
With Trim
21"
4 3/4"
31” HEIGHT DRS DWRS SHLVGDA-V3D482131-L 3 0 2GDA-V3D482131-R 3 0 2GDA-V3D602131-L 3 0 2GDA-V3D602131-R 3 0 234 1/2” HEIGHTGDA-V3D482134-L 3 0 2GDA-V3D482134-R 3 0 2GDA-V3D602134-L 3 0 2GDA-V3D602134-R 3 0 2
48"60"
21 3/4"With Trim
49 1/2"61 1/2"
With Trim
21"
4 3/4"
14"20"
20"
31"34 1/2"
14"20"
31” HEIGHT DRS DWRS SHLVGDA-VSD242131-3 0 2 0GDA-VSD302131-3 0 2 0GDA-VSD362131-3 0 2 0GDA-VSD422131-3 0 2 0GDA-VSD482131-3 0 2 034 1/2” HEIGHTGDA-VSD242134-3 0 2 0GDA-VSD302134-3 0 2 0GDA-VSD362134-3 0 2 0GDA-VSD422134-3 0 2 0GDA-VSD482134-3 0 2 0
24"30"36"42"48"
21"
31"34 1/2"
21 3/4"With Trim
25 1/2" 31 1/2"37 1/2"43 1/2"49 1/2"
With Trim
4 3/4"
234
ROYAL SHEFFIELD Cabinetry Specification Guide
royalsheffieldcabinetry.comBath Cabinets: Passage Bath Collection - AB
ATH
CA
BIN
ETS
Vanity Stacked Drawers - 9Vanity Stacked Drawers - 6
48"60"72"
31"34 1/2"
21 3/4"With Trim
21"
4 3/4"
13"18"
21"
22"24"30"18"
21"
13"
49 1/2" 61 1/2"73 1/2"
With Trim
(L/R) = Specify L or R hinging. (BD) = Butt Doors. All BD cabinets wider than 36” will have a center stile
Vanity Stacked Drawers - 2-4
• Drawer front heights are equally sized. • Top drawer fronts are non-operating.• Middle drawers are Prep for Plumbing drawer boxes.• Bottom drawers are standard drawer boxes.• Modifications available: no moulding left, no moulding right, no moulding either side, and size dimension modifications.• Minimum reduced width available is 42”. Minimum reduced depth available is 18”, and maximum oversized depth available is 30”. Minimum reduced height is 27” and maximum oversized height is 40 1/2”.• When using reduce width modification on this unit, the change of width will be proportionate for left and right sections.• When using reduced or oversized height modifications on this unit, the drawer front heights will remain equally sized.
NOTE: Styling package GAPKG1 must be selected with each item ordered.
31” HEIGHT DRS DWRS SHLVGDA-VSD602131-6
0 4 0
GDA-VSD722131-6
0 4 0
34 1/2” HEIGHTGDA-VSD602134-6
0 4 0
GDA-VSD722134-6
0 4 0
60"72"
61 1/2" 73 1/2"
With Trim
21"
4 3/4"
31"34 1/2"
21 3/4"With Trim
• Drawer front heights are equally sized. • Top drawer front is full width non-operating.• Second drawer from top is full width Prep for Plumbing drawer box.• Third drawer from top is full width Prep for Plumbing drawer box with two side by side drawer fronts attached.• Bottom drawer is full width standard drawer box with two side by side drawer fronts attached.• Due to Prep for Plumbing drawer box, center of bowl will be center of cabinet width.• Modifications available: no moulding left, no moulding right, no moulding either side, and size dimension modifications.• Minimum reduced width available is 30”. Minimum reduced depth available is 18”, and maximum oversized depth available is 30”. Minimum reduced height is 31” and maximum oversized height is 40 1/2”.• When using reduced or oversized height modifications on this unit, the drawer front heights will remain equally sized.
NOTE: Styling package GAPKG1 must be selected with each item ordered.
30"36"42"
21"
34 1/2"
21 3/4"With Trim
31 1/2"37 1/2"43 1/2"
With Trim
4 3/4"
34 1/2” HEIGHT DRS DWRS SHLVGDA-VSD302134-2-4
0 3 0
GDA-VSD362134-2-4
0 3 0
GDA-VSD042134-2-4
0 3 0
• Drawer front heights are equally sized. • Center section top drawer front is non- operating.• Center section middle drawer is Prep for Plumbing drawer box.• Center section bottom drawer is standard drawer box.• Left and right section drawer stacks have three (3) standard drawer boxes.• Due to Prep for Plumbing drawer box, center of bowl will be center of cabinet width.• Modifications available: no moulding left, no moulding right, no moulding either side, and size dimension modifications.• Minimum reduced width available is 42”. Minimum reduced depth available is 18”, and maximum oversized depth available is 30”. Minimum reduced height is 27” and maximum oversized height is 40 1/2”.• When using reduce width modification on this unit, the width will be adjusted equally between the two outside sections.• When using reduced or oversized height modifications on this unit, the drawer front heights will remain equally sized.
NOTE: Styling package GAPKG1 must be selected with each item ordered.
31” HEIGHT DRS DWRS SHLVGDA-VSD482131-9
0 8 0
GDA-VSD602131-9
0 8 0
GDA-VSD722131-9
0 8 0
34 1/2” HEIGHTGDA-VSD482134-9
0 8 0
GDA-VSD602134-9
0 8 0
GDA-VSD722134-9
0 8 0
235
ROYAL SHEFFIELD Cabinetry Specification Guide
royalsheffieldcabinetry.com Bath Cabinets: Passage Bath Collection - A
BAT
H C
AB
INET
S
Furniture Linen with 1 Drawer
• The -L indicates hinged left door; -R indi- cates hinged right door; -B indicates two (2) sets of butt doors.• Bottom section, consisting of working drawer and door(s), will align with 34 1/2” high GDA-VSD-3 units• Shelves are full depth adjustable.• Modifications available: no moulding left, no moulding right, no moulding either side, and size dimension modifications.• Minimum reduced width available is 15”. Minimum reduced depth available is 12”, and maximum oversized depth available is 30”. Minimum reduced height is 72”.
NOTE: Styling package GAPKG1 must be selected with each item ordered.
Linen with Full Height Door(s)
• Door(s) will have center rail. Bottom panel on large door(s) will be square regardless of door style chosen.• The -L indicates hinged left door; -R indi- cates hinged right door; -B indicates butt doors.• Fixed floor mounted 15” below bottom of top rail. • Full depth adjustable shelves in lower section, no shelves in upper section.• Wood topper included and will add 1 1/2” to overall cabinet height. Bottom edge of topper has chamfered edge and top edge has square edge.• Inset overlays are not available.• Modifications available: no moulding left, no moulding right, no moulding either side, reduced width, reduced depth, and oversized depth.• Minimum reduced width available is 15”. Minimum reduced depth available is 12”, and maximum oversized depth available is 30”.
NOTE: Styling package GAPKG1 must be selected with each item ordered.
(L/R) = Specify L or R hinging. (BD) = Butt Doors. All BD cabinets wider than 36” will have a center stile
DRS DWRS SHLVGDA-LN-FH246021-L
1 0 2
GDA-LN-FH246021-R
1 0 2
GDA-LN-FH246021-B
2 0 2
4 3/4"
25 1/2"With Trim
60"
21 3/4"With Trim
25 1/2" 22 1/2"
1 1/2"
4 3/4"
25 1/2"With Trim
21 3/4"With Trim
60"
25 1/2" 22 1/2"
1 1/2"
DRS DWRS SHLVGDA-FL1D187221-L 2 1 3GDA-FL1D187221-R 2 1 3GDA-FL1D247221-L 2 1 3GDA-FL1D247221-R 2 1 3GDA-FL1D247221-B 4 1 4
4 3/4"
72"
21 3/4"With Trim
19 1/2"25 1/2"
With Trim
18"24" 21"
4 3/4"
84"
21 3/4"With Trim 25 1/2"
With Trim
24" 21"
4 3/4"
72"
21 3/4"With Trim
19 1/2"25 1/2"
With Trim
18"24" 21"
4 3/4"
84"
21 3/4"With Trim 25 1/2"
With Trim
24" 21"
Furniture Linen with 1 Drawer
• The -L indicates hinged left door; -R indi- cates hinged right door; -B indicates two (2) sets of butt doors.• Bottom section, consisting of working drawer and door(s), will align with 34 1/2” high GDA-VSD-3 units• 84” high units upper door(s) will have center rail due to door height. Bottom panel on large door(s) will be square regardless of door style chosen.• Shelves are full depth adjustable.• Modifications available: no moulding left, no moulding right, no moulding either side, and size dimension modifications.• Minimum reduced width available is 15”. Minimum reduced depth available is 12”, and maximum oversized depth available is 30”. Minimum reduced height is 72”.
NOTE: Styling package GAPKG1 must be selected with each item ordered.
DRS DWRS SHLVGDA-FL1D188421-L 2 1 4GDA-FL1D188421-R 2 1 4GDA-FL1D248421-L 2 1 4GDA-FL1D248421-R 2 1 4GDA-FL1D248421-B 4 1 4
4 3/4"
72"
21 3/4"With Trim
19 1/2"25 1/2"
With Trim
18"24" 21"
4 3/4"
84"
21 3/4"With Trim 25 1/2"
With Trim
24" 21"
4 3/4"
72"
21 3/4"With Trim
19 1/2"25 1/2"
With Trim
18"24" 21"
4 3/4"
84"
21 3/4"With Trim 25 1/2"
With Trim
24" 21"
72”
84”
236
ROYAL SHEFFIELD Cabinetry Specification Guide
royalsheffieldcabinetry.comBath Cabinets: Passage Bath Collection - BB
ATH
CA
BIN
ETS
Vanity Sink Base
31” HEIGHT DRS DWRS SHLVGDB-V242131-BD 2 0 0GDB-V302131-BD 2 0 0GDB-V362131-BD 2 0 0GDB-V422131 2 0 0GDB-V482131 2 0 034 1/2” HEIGHTGDB-V242134-BD 2 0 0GDB-V302134-BD 2 0 0GDB-V362134-BD 2 0 0GDB-V422134 2 0 0GDB-V482134 2 0 0
Passage Collection - Version B
• False full width drawer front.• Drawer front will align with GDBA-vanity Stacked Drawer-3 of equal height. • Butt doors standard on widths 24” thru 36”, as indicated by -BD.• Widths 42” and greater will have a center stile and not butt doors.• Modifications available: no moulding left, no moulding right, no moulding either side, and size dimension modifications.• Minimum reduced width available is 24”. Minimum reduced depth available is 12”, and maximum oversized depth available is 30”. Minimum reduced height is 27” and maximum oversized height is 40 1/2”.
NOTE: Styling package GBPKG1 must be selected with each item ordered.
24"30"36"42"48"
21"
31"34 1/2"
4 3/4"
Drawer Bottom:1/4” Captive Plywood
Cabinetry Features:
Prep for Plumbing Drawer Box12"
8"
Detail of Prep for Plumbing
Drawer Box
Corner Block:3/4” Solid Wood
Side:Flush Finished
Cabinet Side:3/4” Plywood with Wood Veneered Interior
Bun Feet**:4” high foot in each of the four corners**
Open Area -No Recessed Toe
Styling Package GBPKG1 (shown above) = SBM moulding wraps around bottom edge of cabinet with BF-FF4 foot in each of four (4) corners. SBM moulding adds 5/8” to overall width and 1 1/16” to overall depth of cabinet.
** Bun feet are not available in all wood species. (See Accessories section, Mouldings for wood species availability).
Vanity Base
Drawer Base Linen
• Modifications are available, at no additional cost, to remove mouldings from sides to allow placing of units together or against a wall: MBNML = No moulding on left MBNMR = No moulding on right MBNMB = No moulding on either side Please Note: Feet may need to be readjusted at field installa- tion due to applications not using moulding on one side or both sides.
(L/R) = Specify L or R hinging. (BD) = Butt Doors. All BD cabinets wider than 36” will have a center stile
237
ROYAL SHEFFIELD Cabinetry Specification Guide
royalsheffieldcabinetry.com Bath Cabinets: Passage Bath Collection - B
BAT
H C
AB
INET
S
Vanity with 3 Full Height Doors Vanity Stacked Drawers - 3
• Doors are not equally sized in width. • Two (2) full height vertical partitions divide door sections.• Left and right doors are hinged on outside stiles. Center door hinging is indicated by -L (door hinged left) and -R (door hinged right).• One (1) full depth adjustable shelf in each outside section. No shelf in center section.• Modifications available: no moulding left, no moulding right, no moulding either side, and size dimension modifications.• Minimum reduced width available is 42”. Minimum reduced depth available is 12”, and maximum oversized depth available is 30”. Minimum reduced height is 27” and maximum oversized height is 40 1/2”.• When using reduced width modification on this unit, the width will be adjusted equally between the two outside sections.
NOTE: Styling package GBPKG1 must be selected with each item ordered.
Vanity with Full Height Doors
• All cabinets have butt doors, as indicated by -BD.• Widths 60” and greater will have a center stile in center of face frame.• Cabinet is not drilled for shelves. • Modifications available: no moulding left, no moulding right, no moulding either side, and size dimension modifications.• Minimum reduced width available is 24”. Minimum reduced depth available is 12”, and maximum oversized depth available is 30”. Minimum reduced height is 27” and maximum oversized height is 40 1/2”.
NOTE: Styling package GBPKG1 must be selected with each item ordered.
• Drawer front heights are equally sized. • Top drawer front is full width non-operating.• Middle drawer is Prep for Plumbing drawer box.• Bottom drawer is standard drawer box• Due to Prep for Plumbing drawer box, center of bowl will be center of cabinet width.• Modifications available: no moulding left, no moulding right, no moulding either side, and size dimension modifications.• Minimum reduced width available is 21”. Minimum reduced depth available is 18”, and maximum oversized depth available is 30”. Minimum reduced height is 27” and maximum oversized height is 40 1/2”.• When using reduced or oversized height modifications on this unit, the drawer front heights will remain equally sized.
NOTE: Styling package GBPKG1 must be selected with each item ordered.
(L/R) = Specify L or R hinging. (BD) = Butt Doors. All BD cabinets wider than 36” will have a center stile
31” HEIGHT DRS DWRS SHLVGDB-VFH242131-BD
2 0 0
GDB-VFH302131-BD
2 0 0
GDB-VFH362131-BD
2 0 0
GDB-VFH602131-BD
4 0 0
GDB-VFH7262131-BD
4 0 0
34 1/2” HEIGHTGDB-VFH242134-BD
2 0 0
GDB-VFH302134-BD
2 0 0
GDB-VFH362134-BD
2 0 0
GDB-VFH602134-BD
4 0 0
GDB-VFH722134-BD
4 0 0
24"30"36"
21"
31"34 1/2"
4 3/4"
60"72"
31"34 1/2"
21 3/4"With Trim
61 1/2"73 1/2"
With Trim
21"
4 3/4"
31” HEIGHT DRS DWRS SHLVGDB-V3D482131-L 3 0 2GDB-V3D482131-R 3 0 2GDB-V3D602131-L 3 0 2GDB-V3D602131-R 3 0 234 1/2” HEIGHTGDB-V3D482134-L 3 0 2GDB-V3D482134-R 3 0 2GDB-V3D602134-L 3 0 2GDB-V3D602134-R 3 0 2
48"60"
21"
31"34 1/2"
4 3/4"
14"20"
20"
14"20"
31” HEIGHT DRS DWRS SHLVGDB-VSD242131-3 0 2 0GDB-VSD302131-3 0 2 0GDB-VSD362131-3 0 2 0GDB-VSD422131-3 0 2 0GDB-VSD482131-3 0 2 034 1/2” HEIGHTGDB-VSD242134-3 0 2 0GDB-VSD302134-3 0 2 0GDB-VSD362134-3 0 2 0GDB-VSD422134-3 0 2 0GDB-VSD482134-3 0 2 0
24"30"36"42"48"
21"
31"34 1/2"
4 3/4"
238
ROYAL SHEFFIELD Cabinetry Specification Guide
royalsheffieldcabinetry.comBath Cabinets: Passage Bath Collection - BB
ATH
CA
BIN
ETS
Vanity Stacked Drawers - 9Vanity Stacked Drawers - 6
48"60"72"
21"
4 3/4"
13"18"21"
22"24"30"13"
18"21"
31"34 1/2"
(L/R) = Specify L or R hinging. (BD) = Butt Doors. All BD cabinets wider than 36” will have a center stile
Vanity Stacked Drawers - 2-4
• Drawer front heights are equally sized. • Top drawer fronts are non-operating.• Middle drawers are Prep for Plumbing drawer boxes.• Bottom drawers are standard drawer boxes.• Modifications available: no moulding left, no moulding right, no moulding either side, and size dimension modifications.• Minimum reduced width available is 42”. Minimum reduced depth available is 18”, and maximum oversized depth available is 30”. Minimum reduced height is 27” and maximum oversized height is 40 1/2”.• When using reduce width modification on this unit, the change of width will be proportionate for left and right sections.• When using reduced or oversized height modifications on this unit, the drawer front heights will remain equally sized.
NOTE: Styling package GBPKG1 must be selected with each item ordered.
31” HEIGHT DRS DWRS SHLVGDB-VSD602131-6
0 4 0
GDB-VSD722131-6
0 4 0
34 1/2” HEIGHTGDB-VSD602134-6
0 4 0
GDB-VSD722134-6
0 4 0
60"72"
21"
4 3/4"
31"34 1/2"
• Drawer front heights are equally sized. • Top drawer front is full width non-operating.• Second drawer from top is full width Prep for Plumbing drawer box.• Third drawer from top is full width Prep for Plumbing drawer box with two side by side drawer fronts attached.• Bottom drawer is full width standard drawer box with two side by side drawer fronts attached.• Due to Prep for Plumbing drawer box, center of bowl will be center of cabinet width.• Modifications available: no moulding left, no moulding right, no moulding either side, and size dimension modifications.• Minimum reduced width available is 30”. Minimum reduced depth available is 18”, and maximum oversized depth available is 30”. Minimum reduced height is 31” and maximum oversized height is 40 1/2”.• When using reduced or oversized height modifications on this unit, the drawer front heights will remain equally sized.
NOTE: Styling package GBPKG1 must be selected with each item ordered.
30"36"42"
21"
34 1/2" 4 3/4"
34 1/2” HEIGHT DRS DWRS SHLVGDB-VSD302134-2-4
0 3 0
GDB-VSD362134-2-4
0 3 0
GDB-VSD042134-2-4
0 3 0
• Drawer front heights are equally sized. • Center section top drawer front is non- operating.• Center section middle drawer is Prep for Plumbing drawer box.• Center section bottom drawer is standard drawer box.• Left and right section drawer stacks have three (3) standard drawer boxes.• Due to Prep for Plumbing drawer box, center of bowl will be center of cabinet width.• Modifications available: no moulding left, no moulding right, no moulding either side, and size dimension modifications.• Minimum reduced width available is 42”. Minimum reduced depth available is 18”, and maximum oversized depth available is 30”. Minimum reduced height is 27” and maximum oversized height is 40 1/2”.• When using reduce width modification on this unit, the width will be adjusted equally between the two outside sections.• When using reduced or oversized height modifications on this unit, the drawer front heights will remain equally sized.
NOTE: Styling package GAPKG1 must be selected with each item ordered.
31” HEIGHT DRS DWRS SHLVGDA-VSD482131-9
0 8 0
GDA-VSD602131-9
0 8 0
GDA-VSD722131-9
0 8 0
34 1/2” HEIGHTGDA-VSD482134-9
0 8 0
GDA-VSD602134-9
0 8 0
GDA-VSD722134-9
0 8 0
239
ROYAL SHEFFIELD Cabinetry Specification Guide
royalsheffieldcabinetry.com Bath Cabinets: Passage Bath Collection - B
BAT
H C
AB
INET
S
Furniture Linen with 1 Drawer
• The -L indicates hinged left door; -R indi- cates hinged right door; -B indicates two (2) sets of butt doors.• Bottom section, consisting of working drawer and door(s), will align with 34 1/2” high GDB-VSD-3 units• Shelves are full depth adjustable.• Modifications available: no moulding left, no moulding right, no moulding either side, and size dimension modifications.• Minimum reduced width available is 15”. Minimum reduced depth available is 12”, and maximum oversized depth available is 30”. Minimum reduced height is 72”.
NOTE: Styling package GBPKG1 must be selected with each item ordered.
Linen with Full Height Door(s)
• Door(s) will have center rail. Bottom panel on large door(s) will be square regardless of door style chosen.• The -L indicates hinged left door; -R indi- cates hinged right door; -B indicates butt doors.• Fixed floor mounted 15” below bottom of top rail. • Full depth adjustable shelves in lower section, no shelves in upper section.• Wood topper included and will add 1 1/2” to overall cabinet height. Bottom edge of topper has chamfered edge and top edge has square edge.• Inset overlays are not available.• Modifications available: no moulding left, no moulding right, no moulding either side, reduced width, reduced depth, and oversized depth.• Minimum reduced width available is 15”. Minimum reduced depth available is 12”, and maximum oversized depth available is 30”. • Inset overlays are not available.
NOTE: Styling package GBPKG1 must be selected with each item ordered.
(L/R) = Specify L or R hinging. (BD) = Butt Doors. All BD cabinets wider than 36” will have a center stile
DRS DWRS SHLVGDB-LN-FH246021-L
1 0 2
GDB-LN-FH246021-R
1 0 2
GDB-LN-FH246021-B
2 0 2
25 1/2" 22 1/2"
1 1/2"
4 3/4"
60"
60"
25 1/2" 22 1/2"
1 1/2"
4 3/4"
DRS DWRS SHLVGDB-FL1D187221-L 2 1 3GDB-FL1D187221-R 2 1 3GDB-FL1D247221-L 2 1 3GDB-FL1D247221-R 2 1 3GDB-FL1D247221-B 4 1 4
4 3/4"
24" 21"
84"
18"24" 21"
4 3/4"
72"
Furniture Linen with 1 Drawer
• The -L indicates hinged left door; -R indi- cates hinged right door; -B indicates two (2) sets of butt doors.• Bottom section, consisting of working drawer and door(s), will align with 34 1/2” high GDB-VSD-3 units• 84” high units upper door(s) will have center rail due to door height. Bottom panel on large door(s) will be square regardless of door style chosen.• Shelves are full depth adjustable.• Modifications available: no moulding left, no moulding right, no moulding either side, and size dimension modifications.• Minimum reduced width available is 15”. Minimum reduced depth available is 12”, and maximum oversized depth available is 30”. Minimum reduced height is 72”.
NOTE: Styling package GBPKG1 must be selected with each item ordered.
DRS DWRS SHLVGDB-FL1D188421-L 2 1 4GDB-FL1D188421-R 2 1 4GDB-FL1D248421-L 2 1 4GDB-FL1D248421-R 2 1 4GDB-FL1D248421-B 4 1 4
4 3/4"
24" 21"
84"
18"24" 21"
4 3/4"
72"
72”
84”
240
ROYAL SHEFFIELD Cabinetry Specification Guide
royalsheffieldcabinetry.comBath Cabinets: Jardin Bath Collection - AB
ATH
CA
BIN
ETS
Vanity Sink Base
DRS DWRS SHLVJDA-V242131-L 1 0 0JDA-V242131-R 1 0 0JDA-V302134-BD 2 0 0JDA-V362134-BD 2 0 0JDA-V422134 2 0 0JDA-V482134 2 0 0
Jardin Collection - Version A
• False full width drawer front.• Drawer front aligns with JDA-vanity Stacked Drawer-3 of equal height. • The -L indicates hinged left door; -R indicates hinged right door.• Butt doors standard on widths greater than 24” and less than or equal to 36”, as indicated by -BD.• Widths 42” and greater will have a center stile and not butt doors.• Modifications available: no moulding left, no moulding right, no moulding either side, and size dimension modifications.• Minimum reduced width available is 21”. Minimum reduced depth available is 12” with pilaster and maximum oversized depth available is 30”. Minimum reduced height is 28 1/4” and maximum oversized height is 40 1/2”.
NOTE: Styling package JAPKG1 must be selected with each item ordered.
24"
3"
3"18"22"
With Pilaster
34 1/2"
20 1/2"Drawer Bottom:1/4” Captive Plywood
Cabinetry Features:
Prep for Plumbing Drawer Box12"
8"
Detail of Prep for Plumbing
Drawer Box
Corner Block:3/4” Solid Wood
Side:Flush Finished
Toe Board:Finished 3/4” plywood
4” high, positioned 6” back from front of face frame
Base Moulding:4 3/4” high moulding will be applied between
pilasters at base of cabinet with valance cut out.
Styling Package JAPKG1 (shown above) = PIL-JI pilaster with SBM moulding applied below top drawer wrapping around pilasters and onto sides. PS-AH 4 3/4” high moulding between pilasters at base of cabinet with VAL-H valance cut out below. SBM moulding adds 5/8” to overall width and 5/16” to overall depth of cabinet with pilasters.
**Pilasters used in the Jardin collection are slightly different than the pilasters offered in Accessories Section with the same name, but are complementary to each other.
Vanity Base
Drawer Base Linen
• Modifications are available, at no additional cost, to remove mouldings from sides to allow placing of units together or against a wall: MBNML = No moulding on left MBNMR = No moulding on right MBNMB = No moulding on either side
(L/R) = Specify L or R hinging. (BD) = Butt Doors. All BD cabinets wider than 36” will have a center stile
30"36"42"48"
3"
3"
24"30"36"42"
20 1/2"
22"With Pilaster
34 1/2"
Mid Moulding:3/4” high moulding will wrap around
front, pilasters, and sides of cabinet.
Pilasters**:3” wide x
1 1/2” deep
241
ROYAL SHEFFIELD Cabinetry Specification Guide
royalsheffieldcabinetry.com Bath Cabinets: Jardin Bath Collection - A
BAT
H C
AB
INET
S
Vanity Stacked Drawers - 1-4 Vanity Stacked Drawers - 9Vanity Stacked Drawers - 3
• Drawer front heights are equally sized. • Outside sections top drawer fronts are non-operating.• Outside sections middle drawers are Prep for Plumbing drawer boxes.• Outside sections bottom drawers are standard drawer boxes.• Center section drawer stack has three (3) standard drawer boxes.• Bowl placement will be dependent upon style of overlay chosen:Designer & Full overlays = On 60” wide units, center of bowl placement is 13 3/8” from each side and a maximum bowl width of 23 1/4”. On 72” wide units, center of bowl placement is 15 1/8” from each side and a maximum bowl width of 26 3/4”.Classic & Inset overlays = On 60” wide units, center of bowl placement is 13 3/4” from each side and a maximum bowl width of 22 1/2”. On 72” wide units, center of bowl placement is 15 1/2” from each side and a maximum bowl width of 26”.• Modifications available: no moulding left, no moulding right, no moulding either side, and size dimension modifications.• Minimum reduced width available is 60”. Minimum reduced depth available is 19 1/2” with pilaster and maximum over- sized depth available is 30”. Minimum reduced height is 28 1/4” and maximum oversized height is 40 1/2”.• When using reduced width modifications on 72” wide unit, the center stack drawer section will be adjusted: 60 1/4” wide thru 66” wide units will be 13” and 66 1/4” thru 72” wide units will be 18”. The outside sections will be adjusted proportionately• When using reduced or oversized height modifications on this unit, the drawer front heights will remain equally sized.
NOTE: Styling package JAPKG1 must be selected with each item ordered.
(L/R) = Specify L or R hinging. (BD) = Butt Doors. All BD cabinets wider than 36” will have a center stile
30"36"42"
20 1/2"
3"
3"
24"30"36"22"
With Pilaster
34 1/2"
42"48"
20 1/2"
3"18"21"
3"
18"21"22"
With Pilaster
34 1/2"
60"72"
20 1/2"
3"
20 1/2"24"
3"
13"18"
20 1/2"24"
22"With Pilaster
34 1/2"
• Drawer front heights are equally sized. • Top drawer front is full width non-operating.• Middle drawer is Prep for Plumbing drawer box.• Bottom drawer is standard drawer box• Due to Prep for Plumbing drawer box, center of bowl will be center of cabinet width.• Modifications available: no moulding left, no moulding right, no moulding either side, and size dimension modifications.• Minimum reduced width available is 27”. Minimum reduced depth available is 19 1/2” with pilaster and maximum over- sized depth available is 30”. Minimum reduced height is 28 1/4” and maximum oversized height is 40 1/2”.• When using reduced or oversized height modifications on this unit, the drawer front heights will remain equally sized.
NOTE: Styling package JAPKG1 must be selected with each item ordered.
DRS DWRS SHLVJDA-VSD302134-3 0 2 0JDA-VSD362134-3 0 2 0JDA-VSD422134-3 0 2 0
• Drawer front heights are equally sized. • Top drawer front is full width non-operating.• Middle drawer is full width Prep for Plumb- ing drawer box with two side by side drawer fronts attached.• Bottom drawer is full width standard drawer box with two side by side drawer fronts attached.• Due to Prep for Plumbing drawer box placement, center of bowl will be center of cabinet width.• Modifications available: no moulding left, no moulding right, no moulding either side, and size dimension modifications.• Minimum reduced width available is 36”. Minimum reduced depth available is 19 1/2” with pilaster and maximum over- sized depth available is 30”. Minimum reduced height is 28 1/4” and maximum oversized height is 40 1/2”.• When using reduced or oversized height modifications on this unit, the drawer front heights will remain equally sized.
NOTE: Styling package JAPKG1 must be selected with each item ordered.
DRS DWRS SHLVJDA-VSD422134-1-4
0 2 0
JDA-VSD482134-1-4
0 2 0
DRS DWRS SHLVJDA-VSD602134-9 0 7 0JDA-VSD722134-9 0 7 0
242
ROYAL SHEFFIELD Cabinetry Specification Guide
royalsheffieldcabinetry.comBath Cabinets: Jardin Bath Collection - AB
ATH
CA
BIN
ETS
(L/R) = Specify L or R hinging. (BD) = Butt Doors. All BD cabinets wider than 36” will have a center stile
Furniture Linen with 3 Drawers
• The -L indicates hinged left door; -R indi- cates hinged right door; -B indicates two (2) sets of butt doors.• Drawer front heights are equally sized. • Top drawer front, in stack, will align with top drawer front of JDA-Vanity Sink Base 34 1/2” high.• Shelves are full depth adjustable.• Base moulding will wrap around bottom of cabinet adding 1 1/2” to overall width and 3/4” to overall depth of cabinet. No pilasters will be present regardless of styling package chosen.• Modifications available: no moulding left, no moulding right, no moulding either side, and size dimension modifications.• Minimum reduced width available is 15”. Minimum reduced depth available is 12”, and maximum oversized depth available is 30”. Minimum reduced height is 72”.• When using reduce height modification on this unit, the drawer front heights will remain equally sized. and only the upper section will reduce in height.
NOTE: Styling package GAPKG1 must be selected with each item ordered.
Furniture Linen with 3 Drawers
72"
21 3/4"With Trim
19 1/2"25 1/2"
With Trim
4 3/4"
18"24" 21"
84"
21 3/4"With Trim 25 1/2"
With Trim
4 3/4"
24" 21"
DRS DWRS SHLVJDA-FL3D187221-L 1 3 3JDA-FL3D187221-R 1 3 3JDA-FL3D247221-L 1 3 3JDA-FL3D247221-R 1 3 3JDA-FL3D247221-B 2 3 3
72”
• The -L indicates hinged left door; -R indi- cates hinged right door; -B indicates two (2) sets of butt doors.• Drawer front heights are equally sized. • Top drawer front, in stack, will align with top drawer front of JDA-Vanity Sink Base 34 1/2” high.• 84” high units upper door(s) will have center rail due to door height. Bottom panel on large door(s) will be square regardless of door style chosen• Shelves are full depth adjustable.• Base moulding will wrap around bottom of cabinet adding 1 1/2” to overall width and 3/4” to overall depth of cabinet. No pilasters will be present regardless of styling package chosen.• Modifications available: no moulding left, no moulding right, no moulding either side, and size dimension modifications.• Minimum reduced width available is 15”. Minimum reduced depth available is 12”, and maximum oversized depth available is 30”. Minimum reduced height is 72”.• When using reduce height modification on this unit, the drawer front heights will remain equally sized. and only the upper section will reduce in height.
NOTE: Styling package GAPKG1 must be selected with each item ordered.
72"
21 3/4"With Trim
19 1/2"25 1/2"
With Trim
4 3/4"
18"24" 21"
84"
21 3/4"With Trim 25 1/2"
With Trim
4 3/4"
24" 21"
DRS DWRS SHLVJDA-FL3D188421-L 1 3 4JDA-FL3D188421-R 1 3 4JDA-FL3D248421-L 1 3 4JDA-FL3D248421-R 1 3 4JDA-FL3D248421-B 2 3 4
84”
243
ROYAL SHEFFIELD Cabinetry Specification Guide
royalsheffieldcabinetry.com Bath Cabinets: Jardin Bath Collection - B
BAT
H C
AB
INET
S
(L/R) = Specify L or R hinging. (BD) = Butt Doors. All BD cabinets wider than 36” will have a center stile
Vanity Sink Base
DRS DWRS SHLVJDB-V242131-L 1 0 0JDB-V242131-R 1 0 0JDB-V302134-BD 2 0 0JDB-V362134-BD 2 0 0JDB-V422134 2 0 0JDB-V482134 2 0 0
Jardin Collection - Version B
• False full width drawer front.• Drawer front aligns with JDB-vanity Stacked Drawer-3 of equal height. • The -L indicates hinged left door; -R indicates hinged right door.• Butt doors standard on widths greater than 24” and less than or equal to 36”, as indicated by -BD.• Widths 42” and greater will have a center stile and not butt doors.• Modifications available: no moulding left, no moulding right, no moulding either side, and size dimension modifications.• Minimum reduced width available is 21”. Minimum reduced depth available is 12” with pilaster and maximum oversized depth available is 30”. Minimum reduced height is 28 1/4” and maximum oversized height is 40 1/2”.
NOTE: Styling package JBPKG1 must be selected with each item ordered.
24"
3"
3"
18"
20 1/2"
22"With Pilaster
34 1/2"
Drawer Bottom:1/4” Captive Plywood
Cabinetry Features:
Prep for Plumbing Drawer Box12"
8"
Detail of Prep for Plumbing
Drawer Box
Corner Block:3/4” Solid Wood
Side:Flush Finished
Toe Board:Finished 3/4” plywood
4” high, positioned 6” back from front of face frame
Base Moulding:4 3/4” high moulding will be applied between
pilasters at base of cabinet with valance cut out.
Styling Package JBPKG1 (shown above) = PIL-F pilaster with SBM moulding applied below top drawer wrapping around pilasters and onto sides. SBM mould-ing also applied between pilasters on bottom edge of face frame. SBM moulding adds 5/8” to overall width and 5/16” to overall depth of cabinet with pilasters.
**Pilasters used in the Jardin collection are slightly different than the pilasters offered in Accessories Section with the same name, but are complementary to each other.
Vanity Base
Drawer Base
• Modifications are available, at no additional cost, to remove mouldings from sides to allow placing of units together or against a wall: MBNML = No moulding on left MBNMR = No moulding on right MBNMB = No moulding on either side
30"36"42"48"
3"
3"
24"30"36"42"
20 1/2"
22"With Pilaster
34 1/2"
Mid Moulding:3/4” high moulding will wrap around
front, pilasters, and sides of cabinet.
Pilasters**:3” wide x
1 1/2” deep
244
ROYAL SHEFFIELD Cabinetry Specification Guide
royalsheffieldcabinetry.comBath Cabinets: Jardin Bath Collection - BB
ATH
CA
BIN
ETS
(L/R) = Specify L or R hinging. (BD) = Butt Doors. All BD cabinets wider than 36” will have a center stile
Vanity Stacked Drawers - 1-4 Vanity Stacked Drawers - 9Vanity Stacked Drawers - 3
• Drawer front heights are equally sized. • Outside sections top drawer fronts are non-operating.• Outside sections middle drawers are Prep for Plumbing drawer boxes.• Outside sections bottom drawers are standard drawer boxes.• Center section drawer stack has three (3) standard drawer boxes.• Bowl placement will be dependent upon style of overlay chosen:Designer & Full overlays = On 60” wide units, center of bowl placement is 13 3/8” from each side and a maximum bowl width of 23 1/4”. On 72” wide units, center of bowl placement is 15 1/8” from each side and a maximum bowl width of 26 3/4”.Classic & Inset overlays = On 60” wide units, center of bowl placement is 13 3/4” from each side and a maximum bowl width of 22 1/2”. On 72” wide units, center of bowl placement is 15 1/2” from each side and a maximum bowl width of 26”.• Modifications available: no moulding left, no moulding right, no moulding either side, and size dimension modifications.• Minimum reduced width available is 60”. Minimum reduced depth available is 19 1/2” with pilaster and maximum over- sized depth available is 30”. Minimum reduced height is 28 1/4” and maximum oversized height is 40 1/2”.• When using reduced width modifications on 72” wide unit, the center stack drawer section will be adjusted: 60 1/4” wide thru 66” wide units will be 13” and 66 1/4” thru 72” wide units will be 18”. The outside sections will be adjusted proportionately• When using reduced or oversized height modifications on this unit, the drawer front heights will remain equally sized.
NOTE: Styling package JBPKG1 must be selected with each item ordered.
30"36"42"
20 1/2"
3"
3"
24"30"36"
22"With Pilaster
34 1/2"
42"48"
20 1/2"
3"18"21"
3"
18"21"
22"With Pilaster
34 1/2"
60"72"
20 1/2"
3"
20 1/2"24"
3"
13"18"
20 1/2"24"
22"With Pilaster
34 1/2"
• Drawer front heights are equally sized. • Top drawer front is full width non-operating.• Middle drawer is Prep for Plumbing drawer box.• Bottom drawer is standard drawer box• Due to Prep for Plumbing drawer box, center of bowl will be center of cabinet width.• Modifications available: no moulding left, no moulding right, no moulding either side, and size dimension modifications.• Minimum reduced width available is 27”. Minimum reduced depth available is 19 1/2” with pilaster and maximum over- sized depth available is 30”. Minimum reduced height is 28 1/4” and maximum oversized height is 40 1/2”.• When using reduced or oversized height modifications on this unit, the drawer front heights will remain equally sized.
NOTE: Styling package JBPKG1 must be selected with each item ordered.
DRS DWRS SHLVJDB-VSD302134-3 0 2 0JDB-VSD362134-3 0 2 0JDB-VSD422134-3 0 2 0
• Drawer front heights are equally sized. • Top drawer front is full width non-operating.• Middle drawer is full width Prep for Plumb- ing drawer box with two side by side drawer fronts attached.• Bottom drawer is full width standard drawer box with two side by side drawer fronts attached.• Due to Prep for Plumbing drawer box placement, center of bowl will be center of cabinet width.• Modifications available: no moulding left, no moulding right, no moulding either side, and size dimension modifications.• Minimum reduced width available is 36”. Minimum reduced depth available is 19 1/2” with pilaster and maximum over- sized depth available is 30”. Minimum reduced height is 28 1/4” and maximum oversized height is 40 1/2”.• When using reduced or oversized height modifications on this unit, the drawer front heights will remain equally sized.
NOTE: Styling package JBPKG1 must be selected with each item ordered.
DRS DWRS SHLVJDB-VSD422134-1-4
0 2 0
JDB-VSD482134-1-4
0 2 0
DRS DWRS SHLVJDB-VSD602134-9 0 7 0JDB-VSD722134-9 0 7 0
245
ROYAL SHEFFIELD Cabinetry Specification Guide
royalsheffieldcabinetry.com Bath Cabinets: Sojourn Bath Collection - A
BAT
H C
AB
INET
S
(L/R) = Specify L or R hinging. (BD) = Butt Doors. All BD cabinets wider than 36” will have a center stile
Vanity Sink Base with Full Height Door(s)
31” HEIGHT DRS DWRS SHLVSDA-VFH242131-L 1 0 0SDA-VFH242131-R 1 0 0SDA-VFH302131-BD 2 0 0SDA-VFH362131-BD 2 0 0SDA-VFH422131 2 0 0SDA-VFH482131 2 0 034 1/2” HEIGHTSDA-VFH242134-L 1 0 0SDA-VFH242134-R 1 0 0SDA-VFH302134-BD 2 0 0SDA-VFH362134-BD 2 0 0SDA-VFH422134 2 0 0SDA-VFH482134 2 0 0
Sojourn Collection - Version A
• The -L indicates hinged left door; -R indicates hinged right door.• Butt doors standard on widths greater than 24” and less than or equal to 36”, as indicated by -BD.• Widths 42” and greater will have a center stile and not butt doors.• Modifications available: no moulding left, no moulding right, no moulding either side, and size dimension modifications.• Minimum reduced width available is 21”. Minimum reduced depth available is 12” with turnings and maximum oversized depth available is 30”. Minimum reduced height is 28 1/4” and maximum oversized height is 40 1/2”.• When using reduced or oversized height modifications on this unit, only the cabinet box height will be adjusted.
NOTE: Styling package SAPKG1 must be selected with each item ordered.
24"
17 1/2"21"
13 1/2"
3"
3"
18"
20 1/2"
22"With Turnings
31"34 1/2"
Drawer Bottom:1/4” Captive Plywood
Cabinetry Features:
Prep for Plumbing Drawer Box12"
8"
Detail of Prep for Plumbing
Drawer Box
Corner Block:3/4” Solid Wood
Side:Flush Finished
Open Area -No Recessed Toe Space
Styling Package SAPKG1 (shown above) = TUR-ZF turning in each of four (4) corners.
Vanity Base
Drawer Base
30"36"42"48"
17 1/2"21"
13 1/2"
3"
3"24"30"36"42"
20 1/2"
22"With Turnings
31"34 1/2"
Turnings:3” wide x 3” deep
246
ROYAL SHEFFIELD Cabinetry Specification Guide
royalsheffieldcabinetry.comBath Cabinets: Sojourn Bath Collection - AB
ATH
CA
BIN
ETS
(L/R) = Specify L or R hinging. (BD) = Butt Doors. All BD cabinets wider than 36” will have a center stile
Vanity Stacked Drawers - 1-2 Vanity Stacked Drawers - 6Vanity Stacked Drawers - 2
• Drawer front heights are equally sized. • Outside sections top drawer fronts are non-operating.• Outside sections bottom drawers are Prep for Plumbing drawer boxes.• Center section drawer stack has two (2) standard drawer boxes.• Bowl placement will be dependent upon style of overlay chosen:Designer & Full overlays = On 60” wide units, center of bowl placement is 13 3/8” from each side and a maximum bowl width of 19 1/4”. On 72” wide units, center of bowl placement is 15 1/8” from each side and a maximum bowl width of 22 3/4”.Classic & Inset overlays = On 60” wide units, center of bowl placement is 13 3/4” from each side and a maximum bowl width of 20”. On 72” wide units, center of bowl placement is 15 1/2” from each side and a maximum bowl width of 23 1/2”.• Modifications available: no moulding left, no moulding right, no moulding either side, and size dimension modifications.• Minimum reduced width available is 60”. Minimum reduced depth available is 19 1/2” with turnings and maximum over- sized depth available is 30”. Minimum reduced height is 28 1/4” and maximum oversized height is 40 1/2”.• When using reduced width modifications on 72” wide unit, the center stack drawer section will be adjusted: 60 1/4” wide thru 66” wide units will be 13” and 66 1/4” thru 72” wide units will be 18”. The outside sections will be adjusted proportionately.• When using reduced or oversized height modifications on this unit, cabinet box height will be adjusted, drawer front heights will remain equally sized.
NOTE: Styling package SAPKG1 must be selected with each item ordered.
30"36"42"48"
22"With Turnings
31"34 1/2"
17 1/2"21"
20 1/2"
13 1/2"
3"
24"30"36"42"
3"
36"42"48"
17 1/2"21"
13 1/2"
20 1/2"
22"With Turnings
31"34 1/2"
3"
15"18"21"
3"15"18"21"
17 1/2"21"
13 1/2"
60"72"
20 1/2"
22"With Turnings
31"34 1/2"
3"
3"
20 1/2"24"13"
18"20 1/2"24"
• Drawer front heights are equally sized. • Top drawer front is full width non-operating.• Bottom drawer is Prep for Plumbing drawer box.• Due to Prep for Plumbing drawer box, center of bowl will be center of cabinet width.• Modifications available: no moulding left, no moulding right, no moulding either side, and size dimension modifications.• Minimum reduced width available is 27”. Minimum reduced depth available is 19 1/2” with turnings and maximum over- sized depth available is 30”. Minimum reduced height is 28 1/4” and maximum oversized height is 40 1/2”.• When using reduced or oversized height modifications on this unit, cabinet box height will be adjusted, drawer front heights will remain equally sized.
NOTE: Styling package SAPKG1 must be selected with each item ordered.
31” HEIGHT DRS DWRS SHLVSDA-VSD302131-2 0 1 0SDA-VSD362131-2 0 1 0SDA-VSD422131-2 0 1 0SDA-VSD482131-2 0 1 034 1/2” HEIGHTSDA-VSD302134-2 0 1 0SDA-VSD362134-2 0 1 0SDA-VSD422134-2 0 1 0SDA-VSD482134-2 0 1 0
• Drawer front heights are equally sized. • Top drawer front is full width non-operating.• Bottom drawer is full width Prep for Plumb- ing drawer box with two side by side drawer fronts attached.• Due to Prep for Plumbing drawer box placement, center of bowl will be center of cabinet width.• Modifications available: no moulding left, no moulding right, no moulding either side, and size dimension modifications.• Minimum reduced width available is 36”. Minimum reduced depth available is 19 1/2” with turnings and maximum over- sized depth available is 30”. Minimum reduced height is 28 1/4” and maximum oversized height is 40 1/2”.• When using reduced or oversized height modifications on this unit, cabinet box height will be adjusted, drawer front heights will remain equally sized.
NOTE: Styling package SAPKG1 must be selected with each item ordered.
31” HEIGHT DRS DWRS SHLVSDA-VSD362131-1-2
0 1 0
SDA-VSD422131-1-2
0 1 0
SDA-VSD482131-1-2
0 1 0
34 1/2” HEIGHTSDA-VSD362134-1-2
0 1 0
SDA-VSD422134-1-2
0 1 0
SDA-VSD482134-1-2
0 1 0
31” HEIGHT DRS DWRS SHLVSDA-VSD602131-6 0 4 0SDA-VSD722131-6 0 4 034 1/2” HEIGHTSDA-VSD602134-6 0 4 0SDA-VSD722134-6 0 4 0
247
ROYAL SHEFFIELD Cabinetry Specification Guide
royalsheffieldcabinetry.com Bath Cabinets: Sojourn Bath Collection - A
BAT
H C
AB
INET
S
(L/R) = Specify L or R hinging. (BD) = Butt Doors. All BD cabinets wider than 36” will have a center stile
Vanity Stacked Drawers - Center
Vanity Stacked Drawers - Left & Right
• Drawer front heights are equally sized. • Outside sections each have two (2) full height butt doors.• Center section drawer stack has two (2) standard drawer boxes.• Bowl placement will be dependent upon style of overlay chosen:Designer & Full overlays = On 60” wide units, center of bowl placement is 13 3/8” from each side and a maximum bowl width of 19 1/4”. On 72” wide units, center of bowl placement is 15 1/8” from each side and a maximum bowl width of 23 3/4”.Classic & Inset overlays = On 60” wide units, center of bowl placement is 13 3/4” from each side and a maximum bowl width of 20”. On 72” wide units, center of bowl placement is 15 1/2” from each side and a maximum bowl width of 23 1/2”.• Modifications available: no moulding left, no moulding right, no moulding either side, and size dimension modifications.• Minimum reduced width available is 60”. Minimum reduced depth available is 18” with turnings and maximum oversized depth available is 30”. Minimum reduced height is 28 1/4” and maximum oversized height is 40 1/2”.• When using reduced width modifications on 72” wide unit, the center stack drawer section will be adjusted: 60 1/4” wide thru 66” wide units will be 13” and 66 1/4” thru 72” wide units will be 18”. The outside sections will be adjusted proportionately.• When using reduced or oversized height modifications on this unit, cabinet box height will be adjusted, drawer front heights will remain equally sized.
NOTE: Styling package SAPKG1 must be selected with each item ordered.
17 1/2"21"
13 1/2"
3"
3"
15 1/4"21 1/4"
15 1/4"21 1/4"
60"72"
20 1/2"
22"With Turnings
31"34 1/2"
23 1/2"
17 1/2"21"
13 1/2"
3"
3"
60"72"
20 1/2"24"13"
18"20 1/2"24"
20 1/2"
22"With Turnings
31"34 1/2"
• Drawer front heights are equally sized. • Outside section drawers have two (2) standard drawer boxes.• Center section has two (2) full height butt doors.• Modifications available: no moulding left, no moulding right, no moulding either side, and size dimension modifications.• Minimum reduced width available is 54”. Minimum reduced depth available is 18” with turnings and maximum oversized depth available is 30”. Minimum reduced height is 28 1/4” and maximum oversized height is 40 1/2”.• When using reduced width modification on this unit, the width will be adjusted equally between the two outside sections.• When using reduced or oversized height modifications on this unit, cabinet box height will be adjusted, drawer front heights will remain equally sized.
NOTE: Styling package SAPKG1 must be selected with each item ordered.
31” HEIGHT DRS DWRS SHLVSDA-V602131SDLR
2 4 0
SDA-V722131SDLR
2 4 0
34 1/2” HEIGHTSDA-V602134SDLR
2 4 0
SDA-V722134SDLR
2 4 0
31” HEIGHT DRS DWRS SHLVSDA-V602131SDC 4 2 0SDA-V722131SDC 4 2 034 1/2” HEIGHTSDA-V602134SDC 4 2 0SDA-V722134SDC 4 2 0
248
ROYAL SHEFFIELD Cabinetry Specification Guide
royalsheffieldcabinetry.comBath Cabinets: Sojourn Bath Collection - BB
ATH
CA
BIN
ETS
(L/R) = Specify L or R hinging. (BD) = Butt Doors. All BD cabinets wider than 36” will have a center stile
Vanity Sink Base
DRS DWRS SHLVSDB-VFH242134-L 1 0 0SDB-VFH242134-R 1 0 0SDB-VFH302134-BD 2 0 0SDB-VFH362134-BD 2 0 0SDB-VFH422134 2 0 0SDB-VFH482134 2 0 0
Sojourn Collection - Version B
• The -L indicates hinged left door; -R indicates hinged right door.• Butt doors standard on widths greater than 24” and less than or equal to 36”, as indicated by -BD.• Widths 42” and greater will have a center stile and not butt doors.• Modifications available: no moulding left, no moulding right, no moulding either side, and size dimension modifications.• Minimum reduced width available is 21”. Minimum reduced depth available is 12” with turnings and maximum oversized depth available is 30”. Minimum reduced height is 32” and maximum oversized height is 40 1/2”.• When using reduced or oversized height modifications on this unit, only the cabinet box height will be adjusted.
NOTE: Styling package SBPKG1 must be selected with each item ordered.
24"
21"
13 1/2"
3"
3"
18"
34 1/2"
22"With Turnings
20 1/2"Drawer Bottom:1/4” Captive Plywood
Cabinetry Features:
Prep for Plumbing Drawer Box12"
8"
Detail of Prep for Plumbing
Drawer Box
Corner Block:3/4” Solid Wood
Side:Flush Finished
Open Area -No Recessed Toe Space
Styling Package SBPKG1 (shown above) = LCROWN moulding wraps around the top edge of cabinet and turnings.TUR-ZF turning in each of four (4) corners.LCROWN mouldings add 5 1/4” to overall width and 2 5/8” to overall depth of cabinet with turnings.
Vanity Base
Drawer Base
30"36"42"48"
21"
13 1/2"
3"
3"24"30"36"42"
34 1/2"
22"With Turnings
20 1/2"
Turnings:3” wide x 3” deep
Top Moulding:3 1/2” high moulding will wrap
around front, turnings, and sides of cabinet.
• Modifications are available, at no additional cost, to remove mouldings from sides to allow placing of units together or against a wall: MBNML = No moulding on left MBNMR = No moulding on right MBNMB = No moulding on either side
249
ROYAL SHEFFIELD Cabinetry Specification Guide
royalsheffieldcabinetry.com Bath Cabinets: Sojourn Bath Collection - B
BAT
H C
AB
INET
S
(L/R) = Specify L or R hinging. (BD) = Butt Doors. All BD cabinets wider than 36” will have a center stile
Vanity Stacked Drawers - 1-2 Vanity Stacked Drawers - 6Vanity Stacked Drawers - 2
• Drawer front heights are equally sized. • Outside sections top drawer fronts are non-operating.• Outside sections bottom drawers are Prep for Plumbing drawer boxes.• Center section drawer stack has two (2) standard drawer boxes.• Bowl placement will be dependent upon style of overlay chosen:Designer & Full overlays = On 60” wide units, center of bowl placement is 13 3/8” from each side and a maximum bowl width of 19 1/4”. On 72” wide units, center of bowl placement is 15 1/8” from each side and a maximum bowl width of 22 3/4”.Classic & Inset overlays = On 60” wide units, center of bowl placement is 13 3/4” from each side and a maximum bowl width of 20”. On 72” wide units, center of bowl placement is 15 1/2” from each side and a maximum bowl width of 23 1/2”.• Modifications available: no moulding left, no moulding right, no moulding either side, and size dimension modifications.• Minimum reduced width available is 60”. Minimum reduced depth available is 19 1/2” with turnings and maximum over- sized depth available is 30”. Minimum reduced height is 32” and maximum oversized height is 40 1/2”.• When using reduced width modifications on 72” wide unit, the center stack drawer section will be adjusted: 60 1/4” wide thru 66” wide units will be 13” and 66 1/4” thru 72” wide units will be 18”. The outside sections will be adjusted proportionately.• When using reduced or oversized height modifications on this unit, cabinet box height will be adjusted, drawer front heights will remain equally sized.
NOTE: Styling package SBPKG1 must be selected with each item ordered.
34 1/2"
30"36"42"48"
21"
13 1/2"
3"
24"30"36"42"
3"
22"With Turnings
20 1/2" 36"42"48"
21"
13 1/2"
3"
15"18"21"
3"15"18"21"
34 1/2"
22"With Turnings
20 1/2"60"72"
21"
13 1/2"
3"
3"
20 1/2"24"13"
18"20 1/2"24"
34 1/2"
22"With Turnings
20 1/2"
• Drawer front heights are equally sized. • Top drawer front is full width non-operating.• Bottom drawer is Prep for Plumbing drawer box.• Due to Prep for Plumbing drawer box, center of bowl will be center of cabinet width.• Modifications available: no moulding left, no moulding right, no moulding either side, and size dimension modifications.• Minimum reduced width available is 27”. Minimum reduced depth available is 19 1/2” with turnings and maximum over- sized depth available is 30”. Minimum reduced height is 32” and maximum oversized height is 40 1/2”.• When using reduced or oversized height modifications on this unit, cabinet box height will be adjusted, drawer front heights will remain equally sized.
NOTE: Styling package SBPKG1 must be selected with each item ordered.
DRS DWRS SHLVSDB-VSD302134-2 0 1 0SDB-VSD362134-2 0 1 0SDB-VSD422134-2 0 1 0SDB-VSD482134-2 0 1 0
• Drawer front heights are equally sized. • Top drawer front is full width non-operating.• Bottom drawer is full width Prep for Plumb- ing drawer box with two side by side drawer fronts attached.• Due to Prep for Plumbing drawer box placement, center of bowl will be center of cabinet width.• Modifications available: no moulding left, no moulding right, no moulding either side, and size dimension modifications.• Minimum reduced width available is 36”. Minimum reduced depth available is 19 1/2” with turnings and maximum over- sized depth available is 30”. Minimum reduced height is 32” and maximum oversized height is 40 1/2”.• When using reduced or oversized height modifications on this unit, cabinet box height will be adjusted, drawer front heights will remain equally sized.
NOTE: Styling package SBPKG1 must be selected with each item ordered.
DRS DWRS SHLVSDB-VSD362134-1-2
0 1 0
SDB-VSD422134-1-2
0 1 0
SDB-VSD482134-1-2
0 1 0
DRS DWRS SHLVSDB-VSD602134-6 0 4 0SDB-VSD722134-6 0 4 0
250
ROYAL SHEFFIELD Cabinetry Specification Guide
royalsheffieldcabinetry.comBath Cabinets: Sojourn Bath Collection - BB
ATH
CA
BIN
ETS
(L/R) = Specify L or R hinging. (BD) = Butt Doors. All BD cabinets wider than 36” will have a center stile
Vanity Stacked Drawers - Center
Vanity Stacked Drawers - Left & Right
• Drawer front heights are equally sized. • Outside sections each have two (2) full height butt doors.• Center section drawer stack has two (2) standard drawer boxes.• Bowl placement will be dependent upon style of overlay chosen:Designer & Full overlays = On 60” wide units, center of bowl placement is 13 3/8” from each side and a maximum bowl width of 19 1/4”. On 72” wide units, center of bowl placement is 15 1/8” from each side and a maximum bowl width of 22 3/4”.Classic & Inset overlays = On 60” wide units, center of bowl placement is 13 3/4” from each side and a maximum bowl width of 20”. On 72” wide units, center of bowl placement is 15 1/2” from each side and a maximum bowl width of 23 1/2”.• Modifications available: no moulding left, no moulding right, no moulding either side, and size dimension modifications.• Minimum reduced width available is 60”. Minimum reduced depth available is 18” with turnings and maximum oversized depth available is 30”. Minimum reduced height is 32” and maximum oversized height is 40 1/2”.• When using reduced width modifications on 72” wide unit, the center stack drawer section will be adjusted: 60 1/4” wide thru 66” wide units will be 13” and 66 1/4” thru 72” wide units will be 18”. The outside sections will be adjusted proportionately.• When using reduced or oversized height modifications on this unit, cabinet box height will be adjusted, drawer front heights will remain equally sized.
NOTE: Styling package SBPKG1 must be selected with each item ordered.
60"72"
21"
13 1/2"
3"
3"
15 1/4"21 1/4"
15 1/4"21 1/4"23 1/2"
34 1/2"
22"With Turnings
20 1/2" 60"72"
21"
13 1/2"
3"
3"20 1/2"24"13"18"
20 1/2"24"
34 1/2"
22"With Turnings
20 1/2"
• Drawer front heights are equally sized. • Outside section drawers have two (2) standard drawer boxes.• Center section has two (2) full height butt doors.• Modifications available: no moulding left, no moulding right, no moulding either side, and size dimension modifications.• Minimum reduced width available is 54”. Minimum reduced depth available is 18” with turnings and maximum oversized depth available is 30”. Minimum reduced height is 32” and maximum oversized height is 40 1/2”.• When using reduced width modification on this unit, the width will be adjusted equally between the two outside sections.• When using reduced or oversized height modifications on this unit, cabinet box height will be adjusted, drawer front heights will remain equally sized.
NOTE: Styling package SBPKG1 must be selected with each item ordered.
DRS DWRS SHLVSDB-V602134SDLR
2 4 0
SDB-V722134SDLR
2 4 0
DRS DWRS SHLVSDB-V602134SDC 4 2 0SDB-V722134SDC 4 2 0
251
ROYAL SHEFFIELD Cabinetry Specification Guide
royalsheffieldcabinetry.com Bath Cabinets: Sojourn Bath Collection - C
BAT
H C
AB
INET
S
(L/R) = Specify L or R hinging. (BD) = Butt Doors. All BD cabinets wider than 36” will have a center stile
Vanity Sink Base with Full Height Door(s)
31” HEIGHT DRS DWRS SHLVSDC-VFH242131-L 1 0 0SDC-VFH242131-R 1 0 0SDC-VFH302131-BD 2 0 0SDC-VFH362131-BD 2 0 0SDC-VFH422131 2 0 0SDC-VFH482131 2 0 034 1/2” HEIGHTSDC-VFH242134-L 1 0 0SDC-VFH242134-R 1 0 0SDC-VFH302134-BD 2 0 0SDC-VFH362134-BD 2 0 0SDC-VFH422134 2 0 0SDC-VFH482134 2 0 0
Sojourn Collection - Version C
• The -L indicates hinged left door; -R indicates hinged right door.• Butt doors standard on widths greater than 24” and less than or equal to 36”, as indicated by -BD.• Widths 42” and greater will have a center stile and not butt doors.• Modifications available: no moulding left, no moulding right, no moulding either side, and size dimension modifications.• Minimum reduced width available is 21”. Minimum reduced depth available is 12” with turnings and maximum oversized depth available is 30”. Minimum reduced height is 28 1/4” and maximum oversized height is 40 1/2”.• When using reduced or oversized height modifications on this unit, only the cabinet box height will be adjusted.
NOTE: Styling package SCPKG1 must be selected with each item ordered.
24"
17 1/2"21"
8"
3"
3"
18"
20 1/2"
22"With Turnings
31"34 1/2"
Drawer Bottom:1/4” Captive Plywood
Cabinetry Features:
Prep for Plumbing Drawer Box12"
8"
Detail of Prep for Plumbing
Drawer Box
Corner Block:3/4” Solid Wood
Side:Flush Finished
Open Area -No Recessed Toe Space
Styling Package SCPKG1 (shown above) = TUR-F turning in each of four (4) corners.
Vanity Base
Drawer Base
30"36"42"48"
17 1/2"21"
8"
3"
3"24"30"36"42"
20 1/2"
22"With Turnings
31"34 1/2"
Turnings:3” wide x 3” deep
Bottom Shelf:3/4” plywood with
3/4” wide x 1 1/2” highsolid wood edging
(Edging matches CTMS moulding,See Accessories - Mouldings, )
Linen
252
ROYAL SHEFFIELD Cabinetry Specification Guide
royalsheffieldcabinetry.comBath Cabinets: Sojourn Bath Collection - CB
ATH
CA
BIN
ETS
(L/R) = Specify L or R hinging. (BD) = Butt Doors. All BD cabinets wider than 36” will have a center stile
Vanity Stacked Drawers - 1-2 Vanity Stacked Drawers - 6Vanity Stacked Drawers - 2
• Drawer front heights are equally sized. • Outside sections top drawer fronts are non-operating.• Outside sections bottom drawers are Prep for Plumbing drawer boxes.• Center section drawer stack has two (2) standard drawer boxes.• Bowl placement will be dependent upon style of overlay chosen:Designer & Full overlays = On 60” wide units, center of bowl placement is 13 3/8” from each side and a maximum bowl width of 19 1/4”. On 72” wide units, center of bowl placement is 15 1/8” from each side and a maximum bowl width of 22 3/4”.Classic & Inset overlays = On 60” wide units, center of bowl placement is 13 3/4” from each side and a maximum bowl width of 20”. On 72” wide units, center of bowl placement is 15 1/2” from each side and a maximum bowl width of 23 1/2”.• Modifications available: no moulding left, no moulding right, no moulding either side, and size dimension modifications.• Minimum reduced width available is 60”. Minimum reduced depth available is 19 1/2” with turnings and maximum over- sized depth available is 30”. Minimum reduced height is 28 1/4” and maximum oversized height is 40 1/2”.• When using reduced width modifications on 72” wide unit, the center stack drawer section will be adjusted: 60 1/4” wide thru 66” wide units will be 13” and 66 1/4” thru 72” wide units will be 18”. The outside sections will be adjusted proportionately.• When using reduced or oversized height modifications on this unit, cabinet box height will be adjusted, drawer front heights will remain equally sized.
NOTE: Styling package SCPKG1 must be selected with each item ordered.
30"36"42"48"
22"With Turnings
31"34 1/2"
17 1/2"21"
20 1/2"
8"
3"
24"30"36"42"
3"
36"42"48"
17 1/2"21"
8"
20 1/2"
22"With Turnings
31"34 1/2"
3"
15"18"21"
3"15"18"21"
60"72"
21"
13 1/2"
3"
3"
20 1/2"24"13"
18"20 1/2"24"
34 1/2"
22"With Turnings
20 1/2"
• Drawer front heights are equally sized. • Top drawer front is full width non-operating.• Bottom drawer is Prep for Plumbing drawer box.• Due to Prep for Plumbing drawer box, center of bowl will be center of cabinet width.• Modifications available: no moulding left, no moulding right, no moulding either side, and size dimension modifications.• Minimum reduced width available is 27”. Minimum reduced depth available is 19 1/2” with turnings and maximum over- sized depth available is 30”. Minimum reduced height is 28 1/4” and maximum oversized height is 40 1/2”.• When using reduced or oversized height modifications on this unit, cabinet box height will be adjusted, drawer front heights will remain equally sized.
NOTE: Styling package SCPKG1 must be selected with each item ordered.
31” HEIGHT DRS DWRS SHLVSDC-VSD302131-2 0 1 0SDC-VSD362131-2 0 1 0SDC-VSD422131-2 0 1 0SDC-VSD482131-2 0 1 034 1/2” HEIGHTSDC-VSD302134-2 0 1 0SDC-VSD362134-2 0 1 0SDC-VSD422134-2 0 1 0SDC-VSD482134-2 0 1 0
• Drawer front heights are equally sized. • Top drawer front is full width non-operating.• Bottom drawer is full width Prep for Plumb- ing drawer box with two side by side drawer fronts attached.• Due to Prep for Plumbing drawer box placement, center of bowl will be center of cabinet width.• Modifications available: no moulding left, no moulding right, no moulding either side, and size dimension modifications.• Minimum reduced width available is 36”. Minimum reduced depth available is 19 1/2” with turnings and maximum over- sized depth available is 30”. Minimum reduced height is 28 1/4” and maximum oversized height is 40 1/2”.• When using reduced or oversized height modifications on this unit, cabinet box height will be adjusted, drawer front heights will remain equally sized.
NOTE: Styling package SCPKG1 must be selected with each item ordered.
31” HEIGHT DRS DWRS SHLVSDC-VSD362131-1-2
0 1 0
SDC-VSD422131-1-2
0 1 0
SDC-VSD482131-1-2
0 1 0
34 1/2” HEIGHTSDC-VSD362134-1-2
0 1 0
SDC-VSD422134-1-2
0 1 0
SDC-VSD482134-1-2
0 1 0
31” HEIGHT DRS DWRS SHLVSDC-VSD602131-6 0 4 0SDC-VSD722131-6 0 4 034 1/2” HEIGHTSDC-VSD602134-6 0 4 0SDC-VSD722134-6 0 4 0
253
ROYAL SHEFFIELD Cabinetry Specification Guide
royalsheffieldcabinetry.com Bath Cabinets: Sojourn Bath Collection - C
BAT
H C
AB
INET
S
(L/R) = Specify L or R hinging. (BD) = Butt Doors. All BD cabinets wider than 36” will have a center stile
Vanity Stacked Drawers - Center
Vanity Stacked Drawers - Left & Right
• Drawer front heights are equally sized. • Outside sections each have two (2) full height butt doors.• Center section drawer stack has two (2) standard drawer boxes.• Bowl placement will be dependent upon style of overlay chosen:Designer & Full overlays = On 60” wide units, center of bowl placement is 13 3/8” from each side and a maximum bowl width of 19 1/4”. On 72” wide units, center of bowl placement is 15 1/8” from each side and a maximum bowl width of 22 3/4”.Classic & Inset overlays = On 60” wide units, center of bowl placement is 13 3/4” from each side and a maximum bowl width of 20”. On 72” wide units, center of bowl placement is 15 1/2” from each side and a maximum bowl width of 23 1/2”.• Modifications available: no moulding left, no moulding right, no moulding either side, and size dimension modifications.• Minimum reduced width available is 60”. Minimum reduced depth available is 18” with turnings and maximum oversized depth available is 30”. Minimum reduced height is 28 1/4 and maximum oversized height is 40 1/2”.• When using reduced width modifications on 72” wide unit, the center stack drawer section will be adjusted: 60 1/4” wide thru 66” wide units will be 13” and 66 1/4” thru 72” wide units will be 18”. The outside sections will be adjusted proportionately.• When using reduced or oversized height modifications on this unit, cabinet box height will be adjusted, drawer front heights will remain equally sized.
NOTE: Styling package SCPKG1 must be selected with each item ordered.
60"72"
21"
3"
3"
15 1/4"21 1/4"
15 1/4"21 1/4"23 1/2"
34 1/2"
22"With Turnings20 1/2"
8"
60"72"
21"
3"
3"20 1/2"
24"13"18"20 1/2"
24"
34 1/2"
22"With Turnings
20 1/2"
8"
• Drawer front heights are equally sized. • Outside section drawers have two (2) standard drawer boxes.• Center section has two (2) full height butt doors.• Modifications available: no moulding left, no moulding right, no moulding either side, and size dimension modifications.• Minimum reduced width available is 54”. Minimum reduced depth available is 18” with turnings and maximum oversized depth available is 30”. Minimum reduced height is 28 1/4” and maximum oversized height is 40 1/2”.• When using reduced width modification on this unit, the width will be adjusted equally between the two outside sections.• When using reduced or oversized height modifications on this unit, cabinet box height will be adjusted, drawer front heights will remain equally sized.
NOTE: Styling package SCPKG1 must be selected with each item ordered.
31” HEIGHT DRS DWRS SHLVSDC-V602131SDLR
2 4 0
SDC-V722131SDLR
2 4 0
34 1/2” HEIGHTSDC-V602134SDLR
2 4 0
SDC-V722134SDLR
2 4 0
31” HEIGHT DRS DWRS SHLVSDC-V602131SDC 4 2 0SDC-V722131SDC 4 2 034 1/2” HEIGHTSDC-V602134SDC 4 2 0SDC-V722134SDC 4 2 0
• The -L indicates hinged left door; -R indi- cates hinged right door.• Drawer front heights are equally sized. • Bottom section, consisting of two (2) drawers with standard drawer boxes, will align with 34 1/2” high SDC-VSD-2 units.• Shelves are full depth adjustable.• Wood topper included and will add 1 1/2” to overall cabinet height. Top and bottom of topper edges are square.• Modifications available: no moulding left, no moulding right, no moulding either side, and size dimension modifications.• Minimum reduced width available is 21”. Minimum reduced depth available is 15” with turnings and maximum oversized depth available is 30”. Minimum reduced height is 60”.• When using reduce height modification on this unit, only the door height section will be adjusted.
NOTE: Styling package SCPKG1 must be selected with each item ordered.
18” DEPTH DRS DWRS SHLVSDC-FL2D246018-L 1 2 1SDC-FL2D246018-R 1 2 1SDC-FL2D247218-L 1 2 2SDC-FL2D247218-R 1 2 221” DEPTHSDC-FL2D246021-L 1 2 1SDC-FL2D246021-R 1 2 1SDC-FL2D247221-L 1 2 2SDC-FL2D247221-R 1 2 2
Furniture Linen with 2 Drawers
3"
8"
25 1/2"
18"
3"
19"22"
With Turnings
46 1/2"58 1/2"
24"
19 3/4"22 3/4"
60"72"
254
ROYAL SHEFFIELD Cabinetry Specification Guide
royalsheffieldcabinetry.comBath Cabinets: Sojourn Bath Collection - DB
ATH
CA
BIN
ETS
(L/R) = Specify L or R hinging. (BD) = Butt Doors. All BD cabinets wider than 36” will have a center stile
Vanity Sink Base with Full Height Door(s)
DRS DWRS SHLVSDD-VFH242134-L 1 0 0SDD-VFH242134-R 1 0 0SDD-VFH302134-BD 2 0 0SDD-VFH362134-BD 2 0 0SDD-VFH422134 2 0 0SDD-VFH482134 2 0 0
Sojourn Collection - Version D
• The -L indicates hinged left door; -R indicates hinged right door.• Butt doors standard on widths greater than 24” and less than or equal to 36”, as indicated by -BD.• Widths 42” and greater will have a center stile and not butt doors.• Modifications available: no moulding left, no moulding right, no moulding either side, and size dimension modifications.• Minimum reduced width available is 21”. Minimum reduced depth available is 12” with turnings and maximum oversized depth available is 30”. Minimum reduced height is 32” and maximum oversized height is 40 1/2”.• When using reduced or oversized height modifications on this unit, only the cabinet box height will be adjusted.
NOTE: Styling package SDPKG1 must be selected with each item ordered.
24"
21"
3"
3"
18"
34 1/2"
22"With Turnings
20 1/2"
8"
Drawer Bottom:1/4” Captive Plywood
Cabinetry Features:
Prep for Plumbing Drawer Box
12"
8"
Detail of Prep for Plumbing
Drawer Box
Corner Block:3/4” Solid Wood
Side:Flush Finished
Open Area -No Recessed Toe Space
Styling Package SDPKG1 (shown above) = LCROWN moulding wraps around the top edge of cabinet and turnings.TUR-F turning in each of four (4) corners.LCROWN mouldings add 5 1/4” to overall width and 2 5/8” to overall depth of cabinet with turnings.
Vanity Base
Drawer Base
30"36"42"48"
21"
3"
3"24"30"36"42"
34 1/2"
22"With Turnings
20 1/2"
8"
Turnings:3” wide x 3” deep
Top Moulding:3 1/2” high moulding
will wrap around front, turnings, and sides of
cabinet.
• Modifications are available, at no additional cost, to remove mouldings from sides to allow placing of units together or against a wall: MBNML = No moulding on left MBNMR = No moulding on right MBNMB = No moulding on either side
Bottom Shelf:3/4” plywood with
3/4” wide x 1 1/2” highsolid wood edging
(Edging matches CTMS moulding,See Accessories - Mouldings)
255
ROYAL SHEFFIELD Cabinetry Specification Guide
royalsheffieldcabinetry.com Bath Cabinets: Sojourn Bath Collection - D
BAT
H C
AB
INET
S
(L/R) = Specify L or R hinging. (BD) = Butt Doors. All BD cabinets wider than 36” will have a center stile
Vanity Stacked Drawers - 1-2 Vanity Stacked Drawers - 6Vanity Stacked Drawers - 2
• Drawer front heights are equally sized. • Outside sections top drawer fronts are non-operating.• Outside sections bottom drawers are Prep for Plumbing drawer boxes.• Center section drawer stack has two (2) standard drawer boxes.• Bowl placement will be dependent upon style of overlay chosen:Designer & Full overlays = On 60” wide units, center of bowl placement is 13 3/8” from each side and a maximum bowl width of 19 1/4”. On 72” wide units, center of bowl placement is 15 1/8” from each side and a maximum bowl width of 22 3/4”.Classic & Inset overlays = On 60” wide units, center of bowl placement is 13 3/4” from each side and a maximum bowl width of 20”. On 72” wide units, center of bowl placement is 15 1/2” from each side and a maximum bowl width of 23 1/2”.• Modifications available: no moulding left, no moulding right, no moulding either side, and size dimension modifications.• Minimum reduced width available is 60”. Minimum reduced depth available is 19 1/2” with turnings and maximum over- sized depth available is 30”. Minimum reduced height is 32” and maximum oversized height is 40 1/2”.• When using reduced width modifications on 72” wide unit, the center stack drawer section will be adjusted: 60 1/4” wide thru 66” wide units will be 13” and 66 1/4” thru 72” wide units will be 18”. The outside sections will be adjusted proportionately.• When using reduced or oversized height modifications on this unit, cabinet box height will be adjusted, drawer front heights will remain equally sized.
NOTE: Styling package SDPKG1 must be selected with each item ordered.
30"36"42"48"
22"With Turnings
31"34 1/2"
17 1/2"21"
20 1/2"
8"
3"
24"30"36"42"
3"
36"42"48"
17 1/2"21"
8"
20 1/2"
22"With Turnings
31"34 1/2"
3"
15"18"21"
3"15"18"21"
60"72"
21" 3"
3"
20 1/2"24"13"
18"20 1/2"24"
34 1/2"
22"With Turnings
20 1/2"
8"
• Drawer front heights are equally sized. • Top drawer front is full width non-operating.• Bottom drawer is Prep for Plumbing drawer box.• Due to Prep for Plumbing drawer box, center of bowl will be center of cabinet width.• Modifications available: no moulding left, no moulding right, no moulding either side, and size dimension modifications.• Minimum reduced width available is 27”. Minimum reduced depth available is 19 1/2” with turnings and maximum over- sized depth available is 30”. Minimum reduced height is 32” and maximum oversized height is 40 1/2”.• When using reduced or oversized height modifications on this unit, cabinet box height will be adjusted, drawer front heights will remain equally sized.
NOTE: Styling package SDPKG1 must be selected with each item ordered.
DRS DWRS SHLVSDD-VSD302134-2 0 1 0SDD-VSD362134-2 0 1 0SDD-VSD422134-2 0 1 0SDD-VSD482134-2 0 1 0
• Drawer front heights are equally sized. • Top drawer front is full width non-operating.• Bottom drawer is full width Prep for Plumb- ing drawer box with two side by side drawer fronts attached.• Due to Prep for Plumbing drawer box placement, center of bowl will be center of cabinet width.• Modifications available: no moulding left, no moulding right, no moulding either side, and size dimension modifications.• Minimum reduced width available is 36”. Minimum reduced depth available is 19 1/2” with turnings and maximum over- sized depth available is 30”. Minimum reduced height is 32” and maximum oversized height is 40 1/2”.• When using reduced or oversized height modifications on this unit, cabinet box height will be adjusted, drawer front heights will remain equally sized.
NOTE: Styling package SDPKG1 must be selected with each item ordered.
DRS DWRS SHLVSDD-VSD362134-1-2
0 1 0
SDD-VSD422134-1-2
0 1 0
SDD-VSD482134-1-2
0 1 0
DRS DWRS SHLVSDD-VSD602134-6 0 4 0SDD-VSD722134-6 0 4 0
256
ROYAL SHEFFIELD Cabinetry Specification Guide
royalsheffieldcabinetry.comBath Cabinets: Sojourn Bath Collection - DB
ATH
CA
BIN
ETS
(L/R) = Specify L or R hinging. (BD) = Butt Doors. All BD cabinets wider than 36” will have a center stile
Vanity Stacked Drawers - Center
Vanity Stacked Drawers - Left & Right
• Drawer front heights are equally sized. • Outside sections each have two (2) full height butt doors.• Center section drawer stack has two (2) standard drawer boxes.• Bowl placement will be dependent upon style of overlay chosen:Designer & Full overlays = On 60” wide units, center of bowl placement is 13 3/8” from each side and a maximum bowl width of 19 1/4”. On 72” wide units, center of bowl placement is 15 1/8” from each side and a maximum bowl width of 22 3/4”.Classic & Inset overlays = On 60” wide units, center of bowl placement is 13 3/4” from each side and a maximum bowl width of 20”. On 72” wide units, center of bowl placement is 15 1/2” from each side and a maximum bowl width of 23 1/2”.• Modifications available: no moulding left, no moulding right, no moulding either side, and size dimension modifications.• Minimum reduced width available is 60”. Minimum reduced depth available is 18” with turnings and maximum oversized depth available is 30”. Minimum reduced height is 32” and maximum oversized height is 40 1/2”.• When using reduced width modifications on 72” wide unit, the center stack drawer section will be adjusted: 60 1/4” wide thru 66” wide units will be 13” and 66 1/4” thru 72” wide units will be 18”. The outside sections will be adjusted proportionately.• When using reduced or oversized height modifications on this unit, cabinet box height will be adjusted, drawer front heights will remain equally sized.
NOTE: Styling package SDPKG1 must be selected with each item ordered.
60"72"
21"
3"
3"
15 1/4"21 1/4"
15 1/4"21 1/4"23 1/2"
34 1/2"
22"With Turnings20 1/2"
8"
60"72"
21"
3"
3"20 1/2"
24"13"18"20 1/2"
24"
34 1/2"
22"With Turnings
20 1/2"
8"
• Drawer front heights are equally sized. • Outside section drawers have two (2) standard drawer boxes.• Center section has two (2) full height butt doors.• Modifications available: no moulding left, no moulding right, no moulding either side, and size dimension modifications.• Minimum reduced width available is 54”. Minimum reduced depth available is 18” with turnings and maximum oversized depth available is 30”. Minimum reduced height is 32” and maximum oversized height is 40 1/2”.• When using reduced width modification on this unit, the width will be adjusted equally between the two outside sections.• When using reduced or oversized height modifications on this unit, cabinet box height will be adjusted, drawer front heights will remain equally sized.
NOTE: Styling package SDPKG1 must be selected with each item ordered.
DRS DWRS SHLVSDD-V602134SDLR
2 4 0
SDD-V722134SDLR
2 4 0
DRS DWRS SHLVSDD-V602134SDC 4 2 0SDD-V722134SDC 4 2 0
257
ROYAL SHEFFIELD Cabinetry Specification Guide
royalsheffieldcabinetry.com Bath Cabinets: Plantation Bath Collection - A
BAT
H C
AB
INET
S
(L/R) = Specify L or R hinging. (BD) = Butt Doors. All BD cabinets wider than 36” will have a center stile
Vanity Sink Base
DRS DWRS SHLVLDA-V242134-BD 2 0 0LDA-V302134-BD 2 0 0LDA-V362134-BD 2 0 0LDA-V422134 2 0 0LDA-V482134 2 0 0
Plantation Collection - Version A
• False full width drawer front• Butt doors standard on widths greater than 24” and less than or equal to 36”, as indicated by -BD.• Widths 42” and greater will have a center stile and no butt doors.• Modifications available: no moulding left, no moulding right, no moulding either side, and size dimension modifications.• Minimum reduced width available is 24”. Minimum reduced depth available is 12” and maximum oversized depth available is 30”. Minimum reduced height is 29” and maximum oversized height is 40 1/2”.
NOTE: Styling package LAPKG1 must be selected with each item ordered.
21"
34 1/2"
21 3/4"Bottom Trim
4 3/4"
24"30"36"42"48"
25 1/2" 31 1/2"37 1/2"43 1/2"49 1/2"
Bottom Trim
Cabinetry Features:
Corner Block:3/4” Solid Wood
Side:Flush Finished
Styling Package LAPKG1 (shown above) = LCROWN moulding wraps around top edge of cabinet. PS-AH 4 3/4” high moulding wraps around base of cabinet with VAL-H valance cut out on front.LCROWN moulding adds 5 1/4” to overall width and 2 5/8” to overall depth of cabinet.
Vanity Base
Base Moulding:4 3/4” high moulding will wrap
around front and sides of cabinet with valance cut out in front.
Linen
Toe Board:Finished 3/4” plywood
4” high, positioned 6” back from front of face frame
Top Moulding:3 1/2” high moulding
will wrap around front and sides of
cabinet.
• Modifications are available, at no additional cost, to remove mouldings from sides to allow placing of units together or against a wall: MBNML = No moulding on left MBNMR = No moulding on right MBNMB = No moulding on either side
Drawer Bottom:1/4” Captive Plywood
258
ROYAL SHEFFIELD Cabinetry Specification Guide
royalsheffieldcabinetry.comBath Cabinets: Plantation Bath Collection - AB
ATH
CA
BIN
ETS
(L/R) = Specify L or R hinging. (BD) = Butt Doors. All BD cabinets wider than 36” will have a center stile
Vanity Stacked Drawers - Center
Vanity Sink Base Double
• Outside sections top drawer front are non-operating. • Outside sections each have one (1) set of butt doors.• Center section drawer stack has three (3) standard drawer boxes.• Bowl placement will be dependent upon style of overlay chosen:Designer & Full overlays = On 60” wide units, center of bowl placement is 11 3/4” from each side. On 72” wide units, center of bowl placement is 13 1/2” from each side.Classic & Inset overlays = On 60” wide units, center of bowl placement is 12 1/4” from each side. On 72” wide units, center of bowl placement is 14” from each side.• Modifications available: no moulding left, no moulding right, no moulding either side, and size dimension modifications.• Minimum reduced width available is 60”. Minimum reduced depth available is 12” and maximum oversized depth available is 30”. Minimum reduced height is 29” and maximum oversized height is 40 1/2”.• When using reduced width modifications on 72” wide unit, the center stack drawer section will be adjusted: 60 1/4” wide thru 66” wide units will be 13” and 66 1/4” thru 72” wide units will be 18”. The outside sections will be adjusted proportionately.
NOTE: Styling package LAPKG1 must be selected with each item ordered.
48"60"
21 3/4"Bottom Trim
49 1/2"61 1/2"
Bottom Trim
21"
4 3/4"
34 1/2"
60"72"
34 1/2"
61 1/2"73 1/2"
Bottom Trim
21"
4 3/4"
23 1/2"27"13"
18"23 1/2"
27"21 3/4"Bottom
Trim
• Top drawer fronts are non-operating.• Two (2) sets of butt doors with a center stile in center of face frame, as indicated by -BD.• Modifications available: no moulding left, no moulding right, no moulding either side, and size dimension modifications.• Minimum reduced width available is 48”. Minimum reduced depth available is 12” and maximum oversized depth available is 30”. Minimum reduced height is 29” and maximum oversized height is 40 1/2”.
NOTE: Styling package LAPKG1 must be selected with each item ordered.
DRS DWRS SHLVLDA-V4D482134-BD
4 0 0
LDA-V4D602134-BD
4 0 0
DRS DWRS SHLVLDA-V602134SDC
4 3 0
LDA-V722134SDC
4 3 0
• One (1) set of butt doors in upper section, as indicated by -B.• Drawer front heights are equally sized and will not align with 34 1/2” Plantation Collection vanity units. • Bottom section drawers have standard drawer boxes.• Shelves are full depth adjustable.• Wood topper included and will add 1 1/2” to overall cabinet height. Top and bottom of topper edges are square.• Cabinet box width is 1 1/2” less than overall width with bottom trim; cabinet box depth is 3/4” less than overall depth with bottom trim.• With Styling package LAPKG1 the top moulding and topper adds 6” to overall width; adds 3” to overall depth of unit.• Modifications available: no moulding left, no moulding right, no moulding either side, and size dimension modifications.• Minimum reduced width available is 24”. Minimum reduced depth available is 12” and maximum oversized depth available is 30”. Minimum reduced height is 72”.• When using reduce height modification, only the upper section will reduce in height.
NOTE: Styling package LAPKG1 must be selected with each item ordered.
72” HEIGHT DRS DWRS SHLVSLDA-FL3D247221-B
2 3 2
LDA-FL3D307221-B
2 3 2
84” HEIGHTLDA-FL3D248421-B
2 3 2
LDA-FL3D308421-B
2 3 2
72"84"
25 1/2" 31 1/2"
Bottom Trim
4 3/4"
1 1/2"
21 3/4"Bottom Trim
Furniture Linen with 3 Drawers
259
ROYAL SHEFFIELD Cabinetry Specification Guide
royalsheffieldcabinetry.com Bath Cabinets: Plantation Bath Collection - B
BAT
H C
AB
INET
S
(L/R) = Specify L or R hinging. (BD) = Butt Doors. All BD cabinets wider than 36” will have a center stile
Vanity Sink Base
DRS DWRS SHLVLDB-V242134-BD 2 0 0LDB-V302134-BD 2 0 0LDB-V362134-BD 2 0 0LDB-V422134 2 0 0LDB-V482134 2 0 0
Plantation Collection - Version B
• False full width drawer front• Butt doors standard on widths greater than 24” and less than or equal to 36”, as indicated by -BD.• Widths 42” and greater will have a center stile and no butt doors.• Modifications available: no moulding left, no moulding right, no moulding either side, and size dimension modifications.• Minimum reduced width available is 24”. Minimum reduced depth available is 12” and maximum oversized depth available is 30”. Minimum reduced height is 29” and maximum oversized height is 40 1/2”.
NOTE: Styling package LBPKG1 must be selected with each item ordered.
24"30"36"42"48"
21"
34 1/2" 4 3/4"
Cabinetry Features:
Corner Block:3/4” Solid Wood
Side:Flush Finished
Styling Package LBPKG1 (shown above) = LCROWN moulding wraps around top edge of cabinet. SBM moulding wraps around bottom edge of cabinet with BF-FF4 feet in each of four (4) corners.LCROWN moulding adds 5 1/4” to overall width and 2 5/8” to overall depth of cabinet.
** Bun feet are not available in all wood species. (See Accessories - Mouldings, for wood species availability.)
Vanity Base
Base Moulding:4 3/4” high moulding will wrap
around front and sides of cabinet with valance cut out in front.
Linen
Open Area -No Recessed Toe
Top Moulding:3 1/2” high moulding
will wrap around front and sides of
cabinet.
• Modifications are available, at no additional cost, to remove mouldings from sides to allow placing of units together or against a wall: MBNML = No moulding on left MBNMR = No moulding on right MBNMB = No moulding on either side
Bun Feet**:4” high foot in each of the four corners.
Drawer Bottom:1/4” Captive Plywood
260
ROYAL SHEFFIELD Cabinetry Specification Guide
royalsheffieldcabinetry.comBath Cabinets: Plantation Bath Collection - BB
ATH
CA
BIN
ETS
(L/R) = Specify L or R hinging. (BD) = Butt Doors. All BD cabinets wider than 36” will have a center stile
Vanity Stacked Drawers - Center
Vanity Sink Base Double
• Outside sections top drawer front are non-operating. • Outside sections each have one (1) set of butt doors.• Center section drawer stack has three (3) standard drawer boxes.• Bowl placement will be dependent upon style of overlay chosen:Designer & Full overlays = On 60” wide units, center of bowl placement is 11 3/4” from each side. On 72” wide units, center of bowl placement is 13 1/2” from each side.Classic & Inset overlays = On 60” wide units, center of bowl placement is 12 1/4” from each side. On 72” wide units, center of bowl placement is 14” from each side.• Modifications available: no moulding left, no moulding right, no moulding either side, and size dimension modifications.• Minimum reduced width available is 60”. Minimum reduced depth available is 12” and maximum oversized depth available is 30”. Minimum reduced height is 29” and maximum oversized height is 40 1/2”.• When using reduced width modifications on 72” wide unit, the center stack drawer section will be adjusted: 60 1/4” wide thru 66” wide units will be 13” and 66 1/4” thru 72” wide units will be 18”. The outside sections will be adjusted proportionately.
NOTE: Styling package LBPKG1 must be selected with each item ordered.
48"60"
21"
34 1/2"
4 3/4"
60"72"
21"
4 3/4"
23 1/2"27"13"
18"23 1/2"
27"
34 1/2"
• Top drawer fronts are non-operating.• Two (2) sets of butt doors with a center stile in center of face frame, as indicated by -BD.• Modifications available: no moulding left, no moulding right, no moulding either side, and size dimension modifications.• Minimum reduced width available is 48”. Minimum reduced depth available is 12” and maximum oversized depth available is 30”. Minimum reduced height is 29” and maximum oversized height is 40 1/2”.
NOTE: Styling package LBPKG1 must be selected with each item ordered.
DRS DWRS SHLVLDB-V4D482134-BD
4 0 0
LDB-V4D602134-BD
4 0 0
DRS DWRS SHLVLDB-V602134SDC
4 3 0
LDB-V722134SDC
4 3 0
• One (1) set of butt doors in upper section, as indicated by -B.• Drawer front heights are equally sized and will not align with 34 1/2” Plantation Collection vanity units.• Bottom section drawers have standard drawer boxes.• Shelves are full depth adjustable.• Wood topper included and will add 1 1/2” to overall cabinet height. Top and bottom of topper edges are square.• Cabinet box width is 1 1/2” less than overall width with bottom trim; cabinet box depth is 3/4” less than overall depth with bottom trim.• With Styling package LBPKG1 the top moulding and topper adds 6” to overall width; adds 3” to overall depth of unit.• Modifications available: no moulding left, no moulding right, no moulding either side, and size dimension modifications.• Minimum reduced width available is 24”. Minimum reduced depth available is 12” and maximum oversized depth available is 30”. Minimum reduced height is 72”.• When using reduce height modification, only the upper section will reduce in height.
NOTE: Styling package LBPKG1 must be selected with each item ordered.
72” HEIGHT DRS DWRS SHLVSLDB-FL3D247221-B
2 3 2
LDB-FL3D307221-B
2 3 2
84” HEIGHTLDB-FL3D248421-B
2 3 2
LDB-FL3D308421-B
2 3 2
72"84"
21"Without Trim
24"30"
Without Trim
4 3/4"
1 1/2"
Furniture Linen with 3 Drawers
261
ROYAL SHEFFIELD Cabinetry Specification Guide
royalsheffieldcabinetry.com Bath Cabinets: Plantation Bath Collection - C
BAT
H C
AB
INET
S
(L/R) = Specify L or R hinging. (BD) = Butt Doors. All BD cabinets wider than 36” will have a center stile
Vanity Sink Base
DR DWR SHLVLDC-V242134-L 1 0 0 u
LDC-V242134-R 1 0 0 u
LDC-V302134-BD
2 0 0 u
LDC-V362134-BD
2 0 0 u
LDC-V422134 2 0 0LDC-V482134 2 0 0 u
Plantation Collection - Version C
• False full width drawer front• The -L indicates hinged left door; -R indicates hinged right door.• Butt doors standard on widths greater than 24” and less than or equal to 36”, as indicated by -BD.• Widths 42” and greater will have a center stile and no butt doors.• Modifications available: no moulding left, no moulding right, no moulding either side, and size dimension modifications.• Minimum reduced width available is 24”. Minimum reduced depth available is 12” with pilaster and maximum oversized depth available is 30”. Minimum reduced height is 31” and maximum oversized height is 40 1/2”.
NOTE: Styling package LCPKG1 must be selected with each item ordered.
24"
23 1/4"Bottom Trim
3"
18"
3"
25 1/2"Bottom Trim
4 3/4"
22 1/2"With Pilasters
34 1/2"
Cabinetry Features:
Corner Block:3/4” Solid Wood
Side:Flush Finished
Styling Package LBPKG1 (shown above) = LCROWN moulding wraps around top edge of cabinet. SBM moulding wraps around bottom edge of cabinet with BF-FF4 feet in each of four (4) corners.LCROWN moulding adds 5 1/4” to overall width and 2 5/8” to overall depth of cabinet.
Vanity Base
Mid Moulding:3/4” high moulding will wrap around front, pilasters, and
sides of cabinet.
Base Moulding:3/4” high moulding will wrap around bottom edge of front
and sides of cabinet.
Top Moulding:3 1/2” high moulding
will wrap around front and sides of
cabinet.
Pilaster:3” wide x 1 1/2”
deep pilaster PIL-F applied to left and
right stiles.
Drawer Bottom:1/4” Captive Plywood
• Modifications are available, at no additional cost, to remove mouldings from sides to allow placing of units together or against a wall: MBNML = No moulding on left MBNMR = No moulding on right MBNMB = No moulding on either side
30"36"42"48"
34 1/2"
23 1/4"Bottom Trim
3"
24"30"36"42"
3"
31 1/2"37 1/2"43 1/2"49 1/2"
Bottom Trim
4 3/4"
22 1/2"With Pilasters
u This size in stock in Lawson Quartersawn Oak Porch Swing with Brushed Sepia glaze.
262
ROYAL SHEFFIELD Cabinetry Specification Guide
royalsheffieldcabinetry.comBath Cabinets: Plantation Bath Collection - C, Installed AccessoriesB
ATH
CA
BIN
ETS
(L/R) = Specify L or R hinging. (BD) = Butt Doors. All BD cabinets wider than 36” will have a center stile
Vanity Stacked Drawers - Center
Vanity Sink Base Double
• Outside sections top drawer front are non-operating. • Outside sections each have one (1) set of butt doors.• Center section drawer stack has three (3) standard drawer boxes.• Bowl placement will be dependent upon style of overlay chosen:Designer & Full overlays = On 60” wide units, center of bowl placement is 13 3/8” from each side and a maximum bowl width of 23 1/4”. On 72” wide units, center of bowl placement is 15 1/8” from each side and a maximum bowl width of 26 3/4”.Classic & Inset overlays = On 60” wide units, center of bowl placement is 13 3/4” from each side and a maximum bowl width of 22 1/2”. On 72” wide units, center of bowl placement is 15 1/2” from each side and a maximum bowl width of 26.• Modifications available: no moulding left, no moulding right, no moulding either side, and size dimension modifications.• Minimum reduced width available is 60”. Minimum reduced depth available is 12” with pilaster and maximum oversized depth available is 30”. Minimum reduced height is 31” and maximum oversized height is 40 1/2”.• When using reduced width modifications on 72” wide unit, the center stack drawer section will be adjusted: 60 1/4” wide thru 66” wide units will be 13” and 66 1/4” thru 72” wide units will be 18”. The outside sections will be adjusted proportionately.
NOTE: Styling package LCPKG1 must be selected with each item ordered.
23 1/4"Bottom Trim
34 1/2"
48"
3"
42"
3"
49 1/2"Bottom Trim
4 3/4"
22 1/2"With Pilasters
34 1/2"
60"72"
3"
20 1/2"24"
3"
61 1/2"73 1/2"
Bottom Trim
4 3/4"
20 1/2"24"
18"
22 1/2"With Pilasters
23 1/4"Bottom Trim
13"
• Top drawer fronts are non-operating.• 48” width doors are not butt doors and hinged on outside stiles with a center stile located in the center of face frame.• 60” width has two (2) sets of butt doors with a center stile in center of face frame, as indicated by -BD.• Bowl placement will be dependent upon style of overlay chosen:Designer & Full overlays = On 48” wide units, center of bowl placement is 13 5/8” from each side and a maximum bowl width of 20 3/4”. On 60” wide units, center of bowl placement is 16 5/8” from each side and a maximum bowl width of 26 3/4”.Classic & Inset overlays = On 48” wide units, center of bowl placement is 13 3/4” from each side and a maximum bowl width of 20 1/2”. On 60” wide units, center of bowl placement is 16 3/4” from each side and a maximum bowl width of 26 1/2”.• Modifications available: no moulding left, no moulding right, no moulding either side, and size dimension modifications.• Minimum reduced width available is 42”. Minimum reduced depth available is 12” with pilaster and maximum oversized depth available is 30”. Minimum reduced height is 31” and maximum oversized height is 40 1/2”.
NOTE: Styling package LCPKG1 must be selected with each item ordered.
DRS DWR SHLVLDC-V2D482134 2 0 0LDC-V4D602134-BD
4 0 0 u
DRS DWRS SHLVLDC-V602134SDC
4 3 0
LDC-V722134SDC
4 3 0
23 1/4"Bottom Trim
34 1/2"
60"
3"
54"
3"
61 1/2"Bottom Trim
4 3/4"
22 1/2"With Pilasters
Hamper - Installed
• Floor Mounted pull out with removable 60 qt. plastic hamper.• Available only on VB1821FHD or LN1821.• Reduced depth of less than 21” is not available.• Hamper will not be increased in depth when installed in oversized depth cabinet.• Not available with Collection cabinetry: Passage, Jardin, Sojourn, or Plantation.• Inset overlays are not available.
W x D x HHAMPER-1 13 1/2” x 18 3/4” x 18 1/2”
18"21"
• Chrome metal caddy mounted to the inside of cabinet door.• Allows storage of various grooming tools: hair dryer, curling iron, etc..• Rack will not be increased in depth when installed in oversized depth cabinets.• Due to door width restrictions, only avail- able on vanities with sufficient door width: V30, V33, V36, V30SD, V33SD, V42D, V60SDLR, VTD36, VB30, and VBI30 units.• Not recommended for door styles: Austin, Bennett, Brenton Delaware, Fresn, Hermitage, Hinsdale, Hunter, Laredo, Mansfield, Marcus, Mesa, Meridian, Mirage, Presley, Prospect, Pawnee, Renault, Solara, or Williamsport.• Not available with Sojourn Collection cabinetry.
Grooming Rack - Installed
5 1/4"
16 1/2"
9 1/2"
7"
W x HGR-1 9 1/2” x 16 1/2”
BATH VANITY ACCESSORIES
See Accessories Section for additional options - sink front tray, towel rack, dividers, roll out trays and roll out shelves.
u This size in stock in Lawson Quartersawn Oak Porch Swing with Brushed Sepia glaze.
263
ROYAL SHEFFIELD Cabinetry Specification Guide
royalsheffieldcabinetry.com Bath Cabinets: Wall Mirrors, Medicine Cabinet
BAT
H C
AB
INET
S
(L/R) = Specify L or R hinging. (BD) = Butt Doors. All BD cabinets wider than 36” will have a center stile
Medicine CabinetSurface Mount
MIRROR SHLVSSMMC1830 1 3SMMC2430 1 3SMMC1830B 1 3SMMC2430B 1 3
• Frameless construction; overlays do not apply.• Surface mount only.• Available in square door styles only.• Mirror frame is door rail & stile material. Specify door style and outside profile.• B indicates 1” beveled mirror.• By rotating cabinet at installation, cabinet can operate either as hinge left or right.• Box depth is 4 1/2”.• Soft close door feature is not available.• Minimum reduced width available is 15”. Minimum reduced height is 18”; maximum oversized height is 36”. (See modification section.)• Modifications not available: Minimal scribe ends, furniture board construction, reduced depth, and oversized depth.
30"
18", 24"
5 1/4"
• B indicates 1” beveled mirror.• Frame is made of door material. Specify door style and outside profile.• Minimum reduced width available is 15”. Minimum reduced height is 18”; maximum oversized height is 36”. (See modification section.)• Furniture board construction modification is not available.• Custom sizes are available up to 42” high x 60” wide.
Wall Mirror - Beveled Wall Mirror - Beveled with Shelf & Mouldings
MIRRORS StockWM1829B 1WM2429B 1 u
WM3029B 1 u
WM3629B 1 u
WM4229B 1WM4829B 1 u
WM3036B 1 u u u
WM3636B 1 u u u
WM4236B 1WM4836B 1 u u u
29", 36"
18", 24", 30"36", 42", 48"
• (A/B/C/D) indicates moulding style applied to shelf: A = MCROWN B = LSHAKER C = LCOVE D = PCROWN• Shelf profile has eased edge.• 1” beveled mirror.• Frame is made of door material. Specify door style and outside profile.• Minimum reduced width available is 15”. Minimum reduced height is 18”; maximum oversized height is 36”. (See modification section.)• Furniture board construction modification is not available.• Custom sizes are available up to 42” high x 60” wide.
30", 36"
24", 30",36", 42", 48"
27", 33",39", 45", 51"
3 1/2"
3 7/16"
3 1/4"
3 5/8"
3 1/2"
MCROWN
LSHAKER
LCOVE
PCROWN
A
B
D
C
MIRRORWMSHLF2430-(A/B/C/D) 1WMSHLF3030-(A/B/C/D) 1WMSHLF3630-(A/B/C/D) 1WMSHLF4230-(A/B/C/D) 1WMSHLF4830-(A/B/C/D) 1WMSHLF2436-(A/B/C/D) 1 u
WMSHLF3036-(A/B/C/D) 1 u
WMSHLF3636-(A/B/C/D) 1 u
WMSHLF4236-(A/B/C/D) 1WMSHLF4836-(A/B/C/D) 1 u
u u This size in stock in Lawson Quarter-sawn Oak Porch Swing with Brushed Sepia glaze.
u This size in stock in Montana Maple Cocoa, Pawnee Maple Oyster, Providence Cherry Autumn Coffee, Wesley Oak Autumn, Valley Cherry Sable.
u This size in stock with Moulding Style B applied in Lawson Quartersawn Oak Porch Swing with Brushed Sepia glaze.
264
ROYAL SHEFFIELD Cabinetry Specification Guide
royalsheffieldcabinetry.comBath Cabinets: Medicine CabinetsB
ATH
CA
BIN
ETS
(L/R) = Specify L or R hinging. (BD) = Butt Doors. All BD cabinets wider than 36” will have a center stile
Bi-View Medicine CabinetSurface Mount
Medicine CabinetRecess or Surface Mount
4 5/8"
18", 24"
30"
Bi-View Medicine CabinetRecess or Surface Mount
• Available in square door styles only.• Mirror frame is door rail & stile material. Specify door style and outside profile.• B indicates 1” beveled mirror.• On all overlays, except inset, door size will be the same size due to mirror• Less than 18” wide is not recommended in inset overlay due to mirror size.• By rotating cabinet at installation, cabinet can operate either as hinge left or right.• Minimum reduced width available is 15”. Minimum reduced height is 18”; maximum oversized height is 36”. (See modification section.)• Modifications not available: Minimal scribe ends, furniture board construction, reduced depth, and oversized depth.• Recessed openings: Width Height Depth RMMC1830 17” 28 1/4” 3 7/8” RMMC2430 23” 28 1/4” 3 7/8”
MIRROR SHLVSRMMC1830 1 3RMMC2430 1 3 u
RMMC1830B 1 3RMMC2430B 1 3
MIRROR SHLVSSMBV2430 2 3SMBV3030 2 3
24", 30"
5 1/4"
30"
• Frameless construction; overlays do not apply.• Surface mount only.• Available in square door styles only.• Mirror frame is door rail & stile material. Specify door style and outside profile.• Doors hinge at center.• Box depth is 4 1/2”.• Stained matching interior with tempered glass shelves.• Soft closing door feature is not available.• Minimum reduced width available is 18”. Minimum reduced height is 18”; maximum oversized height is 36”. (See modification section.)• Modifications not available: Minimal scribe ends, furniture board construction, reduced depth, and oversized depth.
• (F/K/M/AB) indicates outside profile on door frame.• Doors hinge at center.• Stained matching interior.• Chrome door knobs are included.• Laminate natural shelf.• Soft closing door feature is not available.• Overlays do not impact the construction of cabinet.• Modifications not available: Minimal scribe ends, furniture board construction, reduced depth, and oversized depth.• Recessed openings: Width Height Depth RMBV2430 23” 29” 3 7/8” RMBV3030 29” 29” 3 7/8”
4 5/8"
24", 30"
30"
Profile F
Profile K
Profile AB
Profile M
MIRROR SHLVSRMBV2430-(F/K/M/AB)
2 3
RMBV3030-(F/K/M/AB)
2 3
u This size in stock in Montana Maple Cocoa, Pawnee Maple Oyster, Providence Cherry Autumn with Coffee glaze, Wesley Oak Autumn, Valley Cherry Sable, Lawson Quartersawn Oak Porch Swing with Brushed Sepia glaze.
265
ROYAL SHEFFIELD Cabinetry Specification Guide
royalsheffieldcabinetry.com Bath Cabinets: Medicine Cabinet
BAT
H C
AB
INET
S
(L/R) = Specify L or R hinging. (BD) = Butt Doors. All BD cabinets wider than 36” will have a center stile
Single Door Medicine CabinetBeveled
MIRROR SHLVSMCF1236B 1 3 u
MCF1536B 1 3MCF1836B 1 3
• Frameless construction; overlays do not apply.• Surface mount only.• Available in square door styles only.• Mirror frame is door material. Specify door style and outside profile.• B indicates 1” beveled mirror.• By rotating cabinet at installation, cabinet can operate either as hinge left or right.• Soft close door feature is not available.• Minimum reduced width available is 12”. Minimum reduced height is 18”; maximum oversized height is 36”. (See modification section.)• Modifications not available: Minimal scribe ends, furniture board construction, reduced depth, and oversized depth.
6"12", 15", 18"
36"
Tri-View Medicine CabinetSurface Mount
Tri-View Medicine CabinetRecess or Surface Mount
30",36",48"
30"
5 1/4"
• Frameless construction; overlays don’t apply.• Surface mount only.• Available in square door styles only.• Mirror frame is door rail & stile material. Specify door style and outside profile.• Box depth is 4 1/2”.• Stained matching interior with tempered glass shelves.• Soft closing door feature is not available.• Min. reduced width available 30”. Min. reduced height 18”; max. oversized height is 36”. • Modifications not available: Minimal scribe ends, furniture board construction, reduced depth, and oversized depth.
MIRROR SHLVSSMTV3030 3 3SMTV3630 3 3SMTV4830 3 9
• (F/K/M/AB) indicates outside profile on door frame.• Doors hinge at center.• Stained matching interior.• Chrome door knobs are included.• Laminate natural shelf.• Soft closing door feature is not available.• Overlays do not impact the construction of cabinet.• Modifications not available: Minimal scribe ends, furniture board construction, reduced depth, and oversized depth.• Recessed openings: Width Height Depth RMTV3030 29” 29” 3 7/8” RMTV3630 35” 29” 3 7/8” RMTV4830 47” 29” 3 7/8”
MIRROR SHLVSRMTV3030-(F/K/M/AB)
3 3 u
RMTV3630-(F/K/M/AB)
3 3 u
RMTV4830-(F/K/M/AB)
3 9 u
30"
30",36",48"
4 5/8"
Profile F
Profile K
Profile AB
Profile M
u This size in stock in Montana Maple Cocoa, Pawnee Maple Oyster, Providence Cherry Autumn with Coffee glaze, Wesley Oak Autumn, Valley Cherry Sable, Lawson Quartersawn Oak Porch Swing with Brushed Sepia glaze.
u This size in stock with Profile F: Montana Maple Cocoa, Pawnee Maple Oyster, Valley Cherry Sable, Lawson Quartersawn Oak Porch Swing with Brushed Sepia glazeProfile M: Wesley Oak AutumnProfile AB: Providence Cherry Autumn with Coffee glaze
Medicine Cabinetwith Open Bottom
30", 36"
21", 24"
4 5/8"
• Mirror frame is door rail & stile material. Specify door style and outside profile.• Recess or surface mount.• Stained, matching interior with stained wood veneered shelves.• Minimum reduced width available is 15”. Minimum reduced height is 24”; maximum oversized height is 42”. (See modification section.)• Modifications not available: Minimal scribe ends, furniture board construction, reduced depth, and oversized depth.
MIRROR SHLVSMCOB2130-(L/R) 1 3MCOB2430-(L/R) 1 3MCOB2136-(L/R) 1 3MCOB2436-(L/R) 1 3
266
ROYAL SHEFFIELD Cabinetry Specification Guide
royalsheffieldcabinetry.comBath Cabinets: Wall Ensemble, OJ Cabinet, WallB
ATH
CA
BIN
ETS
Wall EnsembleSurface Mount
• Consists of (2) MCF1236B Single Door Beveled Mirror Medicine Cabinet and (1) W3636B Beveled Wall Mirror.• On site assembly required.• Overall Size: 60” W x 6” D x 36” H.
MIRROR SHLVSWE6036B 3 6 u
u In stock in Montana Maple Cocoa, Pawnee Maple Oyster, Providence Cherry Autumn with Coffee glaze, Wesley Oak Autumn, Valley Cherry Sable
Wall Ensemble with MouldingSurface Mount
• Consists of (2) MCF1236B Single Door Beveled Mirror Medicine Cabinet, (1) W3636B Beveled Wall Mirror and (1) 8 ft. length of Crown8 moulding for use at top edge.• On site assembly required.• Overall Size: 60” W x 6” D x 38” H.
MIRROR SHLVSWEC6036B 3 6 u
u In stock in Montana Maple Cocoa, Pawnee Maple Oyster, Providence Cherry Autumn with Coffee glaze, Wesley Oak Autumn, Valley Cherry Sable
OJ Cabinet
30"
6"
6"
21", 24"
2 1/4"2 3/4"
2 1/4"
2 3/4"
2 1/4"
2 7/8"
2 1/2"2 1/2"
MCROWN
SOFFITA
LSHAKER
SOFFITE
LCOVE
CHAIR
CHAIR
PCROWN
CABINET
CABINET
CABINETCABINET
• Stained maple interior in open section.• OJ2430 is available without or with moulding applied• (A/B/C/D) indicates moulding style applied: A = MCROWN on top and 1/4” plywood panel applied at bottom with SOFFITA B = LSHAKER on top and 1/4” plywood panel applied at bottom with SOFFITE C = LCOVE on top and 1/4” plywood panel applied at bottom with CHAIR D = PCROWN on top and 1/4” plywood panel applied at bottom with CHAIR Sizes shown in drawing re without optional moulding embellishments applied.• On beaded inset overlay, beading is applied to opening.• Minimum reduced depth available is 4” and minimum reduced height is 21”. Maximum oversized depth available is 12”. (See modification section.)• Reduced width and oversized height modifications are not available.
DRS DWRS SHLVOJ2130-BD 2 0 2 u
OJ2430-BD 2 0 2OJ2430-BD-(A/B/C/D)
2 0 2
30"
6"
6"
21", 24"
2 1/4"2 3/4"
2 1/4"
2 3/4"
2 1/4"
2 7/8"
2 1/2"2 1/2"
MCROWN
SOFFITA
LSHAKER
SOFFITE
LCOVE
CHAIR
CHAIR
PCROWN
CABINET
CABINET
CABINETCABINET
30"
6"
6"
21", 24"
2 1/4"2 3/4"
2 1/4"
2 3/4"
2 1/4"
2 7/8"
2 1/2"2 1/2"
MCROWN
SOFFITA
LSHAKER
SOFFITE
LCOVE
CHAIR
CHAIR
PCROWN
CABINET
CABINET
CABINETCABINET
u This size in stock with Moulding Style B applied in Montana Maple Cocoa, Pawnee Maple Oyster, Providence Cherry Autumn with Coffee glaze, Wesley Oak Autumn, Val-ley Cherry Sable, Lawson Quartersawn Oak Porch Swing with Brushed Sepia glaze.
Wall with One Drawer
• Specify left (L) or right (R).• Drawer front heights are dependent upon overlay chosen: Designer & Full overlay = 6 9/16” high. Classic overlay = 5 1/8” high Inset overlay = 4 13/16” high.• Minimum reduced width available is 9” and minimum reduced height is 18”. Maximum oversized depth is 24”. (See modification section.)• Reduced depth and oversized height modifications are not available.
12"15"18"
7 3/4"
12"
48"52"54"60"
DRS DWRS SHLVW1D1248-(L/R) 1 1 3W1D1548-(L/R) 1 1 3W1D1848-(L/R) 1 1 3W1D1252-(L/R) 1 1 3W1D1552-(L/R) 1 1 3W1D1852-(L/R) 1 1 3W1D1254(L/R) 1 1 3W1D1554-(L/R) 1 1 3W1D1854-(L/R) 1 1 3W1D1260-(L/R) 1 1 3W1D1560-(L/R) 1 1 3W1D1860-(L/R) 1 1 3
267
ROYAL SHEFFIELD Cabinetry Specification Guide
royalsheffieldcabinetry.com Bath Cabinets: Wall Cabinet
BAT
H C
AB
INET
S
Wall Mount Tower with Doors
• Lower section has bottom floor.• Minimum reduced width available is 9”. Minimum reduced depth is 6”; maximum oversized depth is 18”. Minimum reduced height is 36”. • When height modification is requested, height of upper section only will be adjusted.• Oversized height modification is not available.
18"
30"36"42"
12"
48"54"60"
12"15"18"
Wall with Three Drawers Wall Tambour
12"15"18"
18"
12"
48"52"54"60"
• 15 1/4” tambour height clearance.• Tambour portion does not have a back to allow for scribing to backsplash or wall.• No floor in tambour portion of cabinet.• No bottom edge banding on sides.• Minimum reduced width available is 9”. Minimum reduced depth is 6”; maximum oversized depth is 18”. Minimum reduced height is 30”. • Oversized height modification is not available.
48"52"54"60"
12"
16 1/4"
15"18"
• Specify left (L) or right (R).• Drawer front heights are dependent upon overlay chosen: Designer & Full overlay = 5 3/4” high. Classic overlay = 5 1/8” high Inset overlay = 4 13/16” high.• Minimum reduced width available is 9” and minimum reduced height is 48”. Maximum oversized depth is 24”. (See modification section.)• Reduced depth and oversized height modifications are not available.
DRS DWRS SHLVW3D1248-(L/R) 1 3 2W3D1548-(L/R) 1 3 2W3D1848-(L/R) 1 3 2W3D1252-(L/R) 1 3 2W3D1552-(L/R) 1 3 2W3D1852-(L/R) 1 3 2W3D1254(L/R) 1 3 2W3D1554-(L/R) 1 3 2W3D1854-(L/R) 1 3 2W3D1260-(L/R) 1 3 3W3D1560-(L/R) 1 3 3W3D1860-(L/R) 1 3 3
DRS DWRS SHLVWT1548-(L/R) 1 0 2WT1848-(L/R) 1 0 2WT1552-(L/R) 1 0 2WT1852-(L/R) 1 0 2WT1554-(L/R) 1 0 2WT1854-(L/R) 1 0 2WT1560-(L/R) 1 0 2WT1860-(L/R) 1 0 2
DRS DWRS SHLVWMTDD1248-(L/R) 2 0 2WMTDD1548-(L/R) 2 0 2WMTDD1848-(L/R) 2 0 2WMTDD1254(L/R) 2 0 2WMTDD1554-(L/R) 2 0 2WMTDD1854-(L/R) 2 0 2WMTDD1260-(L/R) 2 0 2WMTDD1560-(L/R) 2 0 2WMTDD1860-(L/R) 2 0 2
268
ROYAL SHEFFIELD Cabinetry Specification Guide
royalsheffieldcabinetry.comBath Cabinets: Wall TowersB
ATH
CA
BIN
ETS
(L/R) = Specify L or R hinging. (BD) = Butt Doors. All BD cabinets wider than 36” will have a center stile
Wall Mount Tower with Doors and Drawers
Wall Mount Tower with Door and Open Area
30"36"42"
48"54"60"
12"15"18"
18"
12"
Wall Mount Tower with Doors and Open Area
12"
8"
20"23"26"
20"23"26"
12"15"18"
48"54"60"
18"21"24"
18"21"24"
12"15"18"
48"54"60"
12"
12"
• Lower section is open with matching interior and bottom floor.• Minimum reduced width available is 9”. Minimum reduced depth is 6”; maximum oversized depth is 18”. Minimum reduced height is 36”. • When height modification is requested, height of upper section only will be adjusted.• Oversized height modification is not available.
DRS DWRS SHLVWMTDO1248-(L/R) 1 0 2WMTDO1548-(L/R) 1 0 2WMTDO1848-(L/R) 1 0 2WMTDO1254(L/R) 1 0 2WMTDO1554-(L/R) 1 0 2WMTDO1854-(L/R) 1 0 2WMTDO1260-(L/R) 1 0 2WMTDO1560-(L/R) 1 0 2WMTDO1860-(L/R) 1 0 2
• 6” high drawer box.• Minimum reduced width available is 9”. Maximum oversized depth is 18”. Minimum reduced height is 36”. (See modification section.)• When height modification is requested, height of upper and lower sections will be adjusted equally, no change will be made to drawer section.• Reduce depth and oversized height modifications are not available.
DRS DWRS SHLVWMTDDD1248-(L/R)
2 1 2
WMTDDD1548-(L/R)
2 1 2
WMTDDD1848-(L/R)
2 1 2
WMTDDD1254(L/R)
2 1 2
WMTDDD1554-(L/R)
2 1 2
WMTDDD1854-(L/R)
2 1 2
WMTDDD1260-(L/R)
2 1 2
WMTDDD1560-(L/R)
2 1 2
WMTDDD1860-(L/R)
2 1 2
• Matching interior in open section.• Minimum reduced width available is 9”. Minimum reduced depth is 6”; maximum oversized depth is 18”. Minimum reduced height is 36”. • When height modification is requested, height of upper and lower sections will be adjusted equally, no change will be made to open section.• Oversized height modification is not available.
DRS DWRS SHLVWMTDOD1248-(L/R)
2 0 2
WMTDOD1548-(L/R)
2 0 2
WMTDOD1848-(L/R)
2 0 2
WMTDOD1254(L/R)
2 0 2
WMTDOD1554-(L/R)
2 0 2
WMTDOD1854-(L/R)
2 0 2
WMTDOD1260-(L/R)
2 0 2
WMTDOD1560-(L/R)
2 0 2
WMTDOD1860-(L/R)
2 0 2
269
ROYAL SHEFFIELD Cabinetry Specification Guide
royalsheffieldcabinetry.com Bath Cabinets: Wall Cabinets
BAT
H C
AB
INET
S
(L/R) = Specify L or R hinging. (BD) = Butt Doors. All BD cabinets wider than 36” will have a center stile
Desk Knee Drawer - Full Width
30"33"36"
18", 21", 24"
5 1/2"
Wall Mount Tower with Open Areas and Drawer
Desk Knee Drawer
12"
8"
20"23"26"
20"23"26"
48"54"60"
12"15"18"
• Drawer front(s) will not align with adjacent cabinetry.• 5PCR drawer fronts are not available.• Drawer box height is 2 1/2”.• Does not have a bottom rail.• Minimum reduced width available is 9”. Minimum reduced depth is 12”. Maximum oversized depth is 30”. (See modification section.)• Modifications not available: Reduced height, oversized height, and drawer prep for plumbing.
5 1/2"
24"27"
18", 21", 24"
5 1/2"
18", 21", 24"30"33"36"
DRS DWRS SHLVDKD2418-5 0 1 0DKD2421-5 0 1 0DKD2424-5 0 1 0DKD2718-5 0 1 0DKD2721-5 0 1 0DKD2724-5 0 1 0DKD3018-5 0 1 0DKD3021-5 0 1 0DKD3024-5 0 1 0DKD3318-5 0 1 0DKD3321-5 0 1 0DKD3324-5 0 1 0DKD3618-5 0 1 0DKD3621-5 0 1 0DKD3624-5 0 1 0
• Matching interior in open sections.• 6” high drawer box.• Minimum reduced width available is 9”. Maximum oversized depth is 18”. Minimum reduced height is 36”. (See modification section.)• When height modification is requested, height of upper and lower sections will be adjusted equally, no change will be made to drawer section.• Reduce depth and oversized height modification are not available.
DRS DWRS SHLVWMTODO1248-(L/R)
0 1 2
WMTODO1548-(L/R)
0 1 2
WMTODO1848-(L/R)
0 1 2
WMTODO1254(L/R)
0 1 2
WMTODO1554-(L/R)
0 1 2
WMTODO1854-(L/R)
0 1 2
WMTODO1260-(L/R)
0 1 2
WMTODO1560-(L/R)
0 1 2
WMTODO1860-(L/R)
0 1 2
• Drawer front(s) will not align with adjacent cabinetry.• 5PCR drawer fronts are not available.• Drawer box height is 2 1/2”.• Does not have a bottom rail.• Minimum reduced width available is 9”. Minimum reduced depth is 12”. Maximum oversized depth is 30”. (See modification section.)• Modifications not available: Reduced height, oversized height, and drawer prep for plumbing.
DRS DWRS SHLVDKDFW3018-5 0 1 0DKDFW3021-5 0 1 0DKFWD3024-5 0 1 0DKDFW3318-5 0 1 0DKDFW3321-5 0 1 0DKDFW3324-5 0 1 0DKDFW3618-5 0 1 0DKDFW3621-5 0 1 0DKDFW3624-5 0 1 0