Basic Engraver one The Compact Engraving Machine for Rotogravure Cylinders.

Basic Engraver one The IntegratedColor Calibration.

Basic Engraver one The Prepress Solution for Packaging Printing.

© by Gravure Asia Sdn. Bhd.

Basic Engraver one

Engineering Quality made in Switzerland

The Basic Engraver one is built within smallest tolerances. Each machine base is carefully inspected after the assembly. The machine will be fianally aligned on site, after installation, before commissioning. The necessary function are built into the machine base. This alignment can be checked by the operator and if necessary realigned by our qualified service team. The parallel movement of the engraving head towards the cylinder needs highest precision to ensure the correct cell sizes every where on the cylinder. This function is the foundation for the Basic Engraver one software to generate cells with a predictable cell volumes.

Hardware Designmodern engineering

The mono-block design guaranty highest stability. The strong corrugated machine bed of the Basic Engraver one is designed as rigid central module to carry all components and function groups.

Softwarewith integrated color workflow

An excellent cylinder for Rotogravure printing needs more then the most efficient machine hardware. Equally vital are precise engraving tools and an optimal integrated color separation process as well as a comprehensive know how of the gravure printing process. The smooth interface of all technologies achieve finally the essential economic-cal and superior quality advantage. High performance is not only a question of speed. The idea of the Basic Engraver one is a perfect balance of engraving quality, true color reproduction, optimal repeatability and economic cost of operation.

Printing Simulationsproof on computer screen and digital printer

The necessary software and measuring tools for calibrating printing press, ink and substrate as well as computer displays and digital proof devices, are all included in the Basic Engraver on. The Basic Engraver one separates the Original colors and convert it into cell volumes of the CMYK cylinders. Spot-colors are not separated but converted into cell volumes to reproduce the halftones.

ENGIN

EERIN

G

© by Gravure Asia Sdn. Bhd.

Color Competence

Cylinders

Face With 400mm - 1400mm

Circumference 200mm - 1200mm

maximum Cylinder weight

200 kg

Cylinder Attachment

Universal Bearing Pivot

Custom made Bearing Pivot

Engraving Speed

4500 cells/minute

(appr. 42 minutes for ½ m²)

Engraving Angles

5 selectable angles

Diamond Stylus recommended

115º 120º 130º 140º

Dimension

Height1340mm Witdth 800mm Length 3465mm

Weight

2500 kg

Room Condition

Temperature +20ºC - +28ºC

Relative Humidity 50% - 70%

Power Supply

Single Phase 220 V - 240 V 50/60 Hz

Mean Current 2.0 kVA

Peak current 3.1kVA

Engraving Heads

Type B 48 Lines/cm - 60 Lines/cm

Type C 60 Lines/cm - 100 Lines/cm

Specifications

© by Gravure Asia Sdn. Bhd.

Basic Engraver one

MADE

Von Arx Engineering + Co. AGIndustriestrasse 24657 Dulliken Solothurn Switzerland

© by Gravure Asia Sdn. Bhd.

Color Competence Gravure Asia Sdn. Bhd.Unit AG11 PJ Industrial ParkJalan Kemajuan46200 Petaling Jaya, SelangorMalaysia

Tel. + 60 3 7958 6012Fax + 60 3 7958 6144Email admin@gravureasia.comwww.gravureasia.com