BASIC DRILLING SCHOOLBASIC DRILLING SCHOOL

COURSE OBJECTIVESCOURSE OBJECTIVESDuring this drilling school you will get all the knowledge about

drilling oil and gas wells, design requirements, actual case

design and monitor drilling operations as follows :

1. What is drilling and how an oil well is drilled.

2. The different services & technical knowledge used in the drilling process.

3. What are and where to get the necessary well design data.

4. Definition of Formation Evaluation and different logs used to evaluate the formations.

5. Different calculations used in design oil and gas wells.

6. Real Case Well Design using actual oil field data.

7. Using the proper calculations to follow up the operations.

COURSE OUTLINESCOURSE OUTLINESA. BASIC DRILLING KNOWLEDGE :•Steps for drilling a well•Wells Construction.•Types of Drilling Rigs.•Main Components of Drilling rigs.•Drilling Fluids•Drilling bits•Drill String and Down Hole Tools.•Well Head & Well Control Equipment.•Casing and Cement•Directional Drilling.•Drilling Problems

• 1 Hrs.• 1 Hrs.• 1 Hrs.• 1 Hrs.• 4 Hrs.• 4 Hrs.• 4 Hrs. • 4 Hrs.• 4 Hrs.• 4 Hrs.• 8 Hrs.

COURSE OUTLINESCOURSE OUTLINESB. WELL DESIGN PRINCIPLES :•Steps for design a well.•Collect Actual design data.•Perform the necessary calculations and draw curves.•Design Drilling Fluids weights.•Design casing strings.•Rigs design calculations.•Select & Design Drilling bits.•Cementing requirement an Design•Design Drill String and D.H Tools.•Directional Drilling & Plan Design.•Well Head & Well Control Equipment.

• 4 Hrs.• 4 Hrs.• 4 Hrs.• 4 Hrs.• 2 Hrs.• 4 Hrs.• 2 Hrs. • 4 Hrs.• 4 Hrs.• 4 Hrs.• 2 Hrs.• 2 Hrs

COURSE OUTLINESCOURSE OUTLINESC. ACTUAL CASE DESIGN AND CALCULATIONS :•Description of the well being designed.•Collect Offset data.•Draw Actual Pore & Fracture curves•Design Drilling Fluids•Design casing strings.•Rigs design calculations.•Select Drilling bits.•Cementing requirement an Design.•Directional Drilling.•Design Drill String and D.H Tools.•Well Head & Well Control Equipment.

• 1 Hrs.• 3 Hrs.• 4 Hrs.• 4 Hrs.• 4 Hrs.• 2 Hrs.• 2 Hrs.• 4 Hrs. • 2 Hrs.• 4 Hrs.• 4 Hrs.

COURSE OUTLINESCOURSE OUTLINES

D. MONITOR DRILLING OPERATIONS :•Geological & Drilling Programs •Prepare and Read Daily Reports•Monitor Hole conditions.•Stuck Pipe and Prevention.•Fishing Practices and Tools•Well Control Methods & Prevention.•Down hole tools and quality control.•Well Integrity.•End Of Wells Reports•General Discussions

• 2 Hrs.• 4 Hrs.• 4 Hrs.• 2 Hrs.• 2 Hrs.• 4 Hrs.• 2 Hrs. • 4 Hrs.• 2 Hrs.• 4 Hrs.