Base feature set replicated as the SCW9047

All-in-one security solution

Two-Way wireless support

Two-Way Audio verification over GSM

Premium lighting

Quick enrollment for wireless devices

Wireless carbon monoxide support

SCW9057 Key Features/Benefits

Note:In addition All 1-way 433MHz devices are supported

Up to Two Wireless Indoor/Outdoor Sirens

Up to 16 WT4989 Key fobs (without using zones)

WT5500P, WT5500B (Premium lighting),WT5500 Keypads compatibility.

PT4 proximity access card compatibility.

WT4920 Support for superb wireless coverage.

Quick enrollment for wireless devices

Wireless carbon monoxide support.

Wireless Support

SCW9057 Key Features/Benefits Communications

Cellular antenna embedded therefore no need for an external antenna

Supports onboard PSTN communications

IP onlyOr

3G and IP3G onlyOr

3G and IP

Full alphanumeric LCD screen with blue backlighting and White key backlighting.

Priority Tamper feature designed to prevent the system from being disabled during entry delay.When entry delay is initiated, the system will monitor to a system tamper. If a system tamper is detected during entry delay, a burglary event will be transmitted within 300ms over the 3G module to the CS.

SCW9057 Key Features/Benefits Premium Lighting & Priority Tamper (3G or TL2553G Only)

SCW9057 Key Features/Benefits

Command and Control using two-way SMS Messages from a cell phone over 3G or IP

Requires modules 3G2055 or TL2553G.

Needs to be enabled through C24.

Panel’s Phone number located in * [6] command.

Example of SMS text to Panel:Stay Arm 1234 or Disarm 1234

1234 = Valid Code

Command and ControlOutdoor Temperature using siren (WT4911) Will be displayed on keypads.

Firmware upgrade via 3G.

Audio verification over 3G.

Clock update via 3G network.

3G signal strength displayed on keypad.

Additional Features

System Overview

Overview:Status LED Indicators1 – Ready 2 – Armed3 – Trouble 4 – AC Status

Function Keys5 – Stay Arm6 – Away Arm7 – Chime Enable/Disable8 – Zone Bypass9 – Quick Exit

Emergency Keys (Dual Action)10 – Panic11 – Auxiliary 12 – Fire

13 – Arrow Keys14 – Custom LCD Screen

SCW9057 (Front)

Overview:1 – TL/3G Module 2 – Wiring Access

3 – Case Tamper Switch4 – Terminal Strip5 – Cover Screw Hole

6 – Backup Battery7 – Mounting Hole

SCW9057 (Inside Cover)

SCW9057 Terminals Overview

ACAC power connections 16.5VAC, 20VA

I/O TerminalsI/O 1 - configurable as zone input or PGM output. Zone#33 when configured as a zone input. Max. 50mA when configured as a PGM output.

I/O 2 - configurable as zone input or PGM output. Zone#34 when configured as a zone input. Max. 50mA when configured as a PGM output.0

AUX +/-Power connections for 12vdc devices. Max. 200mA current draw

Telephone Connections

TIP/RING - incoming telephone service

T-1/R-1 - return telephone connection to premise

SCW9057 (PC-LINK Connection)

Wireless Quick Enroll Programming

SCW9057 requires 8 digits serial numbers for wireless devices enrollment:

One-way wireless devices required 6 digits serial numbers adding 00 in front.

Two-way wireless devices required 8 digits serial numbers.

Wireless Information

Quick Enroll:

The Quick Enroll programming method is designed to reduce the time required to program wireless devices/detectors.

The following information is programmable when using the Quick Enroll method:

Serial Numbers - NO need for programming serial numbers manually. Therefore preventing programming errors. • Zone Number (detectors)• Zone Definitions (detectors)• Slot Number (Keypads, Sirens, FOBs)• Wireless Placement test.

Test Wireless Devices/Modules

Step 1 – Activate each wireless device/detector one at a time from the proposed mounting locationWireless Keypad – [*] and [1] simultaneouslyWireless sirens (WT4901, WT4911) – activate tamperDoor/window contact – activate tamper or violate contactMotion detectors – activate tamperSmoke Detector – activate tamperGlass break Detector – activate tamperPanic Pendant – Press and hold button for 2-3 secondsCO Detector – activate tamperFlood Sensor – activate tamper

Step 2 – The test result will be indicated:

Good Result Bad ResultKeypad Display ‘Location is Good’ ‘Location is Bad’Siren 1 Squawk 3 Squawks

Technology Overview

Specifications:

•128-bit AES encryption via HSPA/3G networks•Activating, initialization and programming through Connect24•Primary or backup communications•No external antenna required•Full event reporting to central station•HSPA/3G test transmission•2-way audio verification over cellular network•Integrated call routing•Panel uploading/downloading over HSPA/3G•Dual band operation•Contact ID or SIA format reporting•Supervision over cellular network

3G2055 Alarm CommunicatorSpecifications:

•128-bit AES encryption via Ethernet/Internet•Primary or backup communications•Full event reporting to central station•Ethernet LAN/WAN 10/100 Base T•Ethernet/Internet test transmission•Integrated call routing•Panel uploading/downloading over Ethernet/Internet•Contact ID or SIA format reporting•Supervision over Ethernet/Internet

TL255 Alarm Communicator

Audio Verification via Cellular

Overview:The SCW9057 supports the ability to perform an audio verification session over GSM when a 3G2055 or TL2553G module is connected

Summary of operation:• An alarm is generated that requires audio verification• The control panel will transmit the event over IP (GPRS Network) to the central station receiver• A second signal is transmitted to the central station over IP (GPRS Network) containing the call

back telephone number• The central station will then call this telephone number • The audio verification session is now active over the GSM network

Audio Verification via Cellular

Audio Verification via Cellular

Coming Soon

Dual DACT Support