Bartosz Sakowicz

Marek Kaminski

Piotr Mazur

Calibration Database

2

2009.06.26 XFEL Collaboration meeting, Lodz, PolandBartosz Sakowicz, Ph.D., Dep. of Microelectronics and Computer Science, Tech. Univ. of Lodz

Calibration Database

Status of work from previous contract

WP2.3.10.1 Flash firmware database Under review/accepted 

WP6.5.1.1 EA Requirements Under review/acceptedWP6.5.1.2   ActiveWP6.5.1.3   ActiveWP6.5.1.4   ActiveWP6.5.1.5   Under review/accepted

 WP6.5.2.1   CancelledWP6.5.2.2   Cancelled

 WP6.5.3.1 Main database modules Under review/acceptedWP6.5.3.2   Under review/acceptedWP6.5.3.3   Under review/acceptedWP6.5.3.4   Under review/acceptedWP6.5.3.5   Under review/acceptedWP6.5.3.6   Under review/acceptedWP6.5.3.7   Under review/acceptedWP6.5.3.8   Under review/accepted

 WP6.5.4.1   CancelledWP6.5.4.2   CancelledWP6.5.4.3   Cancelled

 WP6.5.5.1 EA configuration change Accepted

 WP6.5.6.1 Time Sheet System Under review/accepted

3

2009.06.26 XFEL Collaboration meeting, Lodz, PolandBartosz Sakowicz, Ph.D., Dep. of Microelectronics and Computer Science, Tech. Univ. of Lodz

Calibration Database

Proposition to new contract (1)

Calibration parameters prototype database (already done !) hardware database (including cables and connections) firmware database calibration parameters database

4

2009.06.26 XFEL Collaboration meeting, Lodz, PolandBartosz Sakowicz, Ph.D., Dep. of Microelectronics and Computer Science, Tech. Univ. of Lodz

Calibration Database

Proposition to new contract (2)

Calibration parameters database improvements (to be precised):

relation to DOOCS parameters documentation database software bundles concept geographical localization feature relation to Time Sheet System (in the future)

5

2009.06.26 XFEL Collaboration meeting, Lodz, PolandBartosz Sakowicz, Ph.D., Dep. of Microelectronics and Computer Science, Tech. Univ. of Lodz

Calibration Database

Relation to XFEL requirements/goals (1)[LLRF GOALS]

IDName Text

G1 Minimal System Build minimal system capable of fulfilling commissioning and initial operation (build minimal system that is capable of being upgraded to full automated system without major changes in the system structure)a. Scalableb. Upgradablec. Release capable (designed for multiple releases)

G4 Easy operation Support the operators for easy operation, allow single operator to change beam energy

G4.1 Accept declarative inputs System should accept declarative inputs:a. Parameter will be set by operator and system determines settings for the inputs itself

G4.2 Operator input fault tolerance

Prevent operator from setting parameters which lead to undesired accelerator conditions

6

2009.06.26 XFEL Collaboration meeting, Lodz, PolandBartosz Sakowicz, Ph.D., Dep. of Microelectronics and Computer Science, Tech. Univ. of Lodz

Calibration Database

Relation to XFEL requirements/goals (2)[USER REQUIREMENTS]

IDName Text

UR6 Provide automation for operation

Provide a high degree of automation of operation to assist the operator and system experts

UR6.1 Minimize the parameter set that the user should

input

Most of the LLRF system parameters should be generated automatically from the abstract input from the user.

UR27 User's manual Provide user's manual for LLRF operation

UR32 User interface Provide intuitive user interface with help function

7

2009.06.26 XFEL Collaboration meeting, Lodz, PolandBartosz Sakowicz, Ph.D., Dep. of Microelectronics and Computer Science, Tech. Univ. of Lodz

Calibration Database

Relation to XFEL requirements/goals (3)

[SYSTEM REQUIREMENTS]

ID Name Text

SR7 Automation for operation Provide a high degree of automation of operation to assist the operators and RF experts:1.All LLRF components should provide interfaces for automatic configuration and control2.An unified and extendable automation concept and framework should be worked out3.Procedures for different LLRF operation scenarios should be worked out4.Automation bypass mode (manual mode of operation) should be also provided

SR14.4.4 Control system status Warnings and alarms:1.LLRF database accessibility2.Operator input out of rangeExceptions:1.Operating system failure2.Device driver failure3.DOOCS server failure4.Computer network failure

SR16 Documentation Provide documentation for LLRF system description and operation support. The documentation should include system requirements, system concept, design, acceptance test descriptions and operational manuals.

SR16.2 Provide online help documentations

Provide online help documentations for trouble shooting by the users. Each topic of the online help documentations should be able to be searched out within 1 minute.

SR39 (To be elaborated) Easy to install and re-install

LLRF hardware and software should be easily installed. The metric can be: the man-hour needed to install a hardware or software.May include:1.Cable installation2.Crate and board installation3.Software including the run-time environment installation 4.Firmware configuration

SR49 Easy to learn More than 90% of the tasks should be done by the operator by accessing the online help documentations

[SYSTEM REQUIREMENTS]

8

2009.06.26 XFEL Collaboration meeting, Lodz, PolandBartosz Sakowicz, Ph.D., Dep. of Microelectronics and Computer Science, Tech. Univ. of Lodz

Calibration Database

Thank you for attention