7/27/2019 Barco UserGuide R5905324 01
Quick-Start-guide-HDQ-Series
1/2
HDQ seriesQuick start guideMounting the lens
Remove oam in lens opening. Place lens holder in unlock
position. Handle A
towards socket B. Gently insert the lens in such a way that
the
lens connector matches the socket B.
Insert the lens until the connector seats intothe socket.
Secure the lens in the lens holder. Movehandle A into the lock
position (away romsocket B).
Check i lens touches the ront plate o thelens holder.
Check i the lens is really secured by trying topull the lens out
o the lens holder.
Place the 2 lens ixation brackets (1) into po-sition and secure
with a nut on each bracket
A
B
11
Mounting the lamp house
Remove housing on lamp house side. Grip the lamp house by both
handles (1) Place the lamp house on the base plate inside
the lamp compartment. Line up the oot o the lamp house with
the
slots on the base (2).
1
1
2
3
1
Be ore installing the Lamp House, dis-connect the power to the
projectormains terminals and unplug the powercord at the UPS INLET
or removal o allpower rom the projector
Push the lamp house ully in. Secure both retaining screws. Mount
the housing
1
22
Additional vertical shift To extend lens shi t in a speci c
direction. Loosen the 4 screws (1) until central part o
lens holder becomes loose. Shi t the central part up or down.
Lowermost, middle and uppermost shi t posi-
tions are marked on the lens holder (2). Tighten the 4
screws.
Overview window (A) Main source PiP source IP address Customer
ID Lamp status Mains voltage Ambient temperature Text status
(OSD)
Lamp overview window (B) Number o strikes Run time (hours)
Remaining run time (hours) % lamp used
About window (C) Package version in use Mgr So tware in use GUI
So tware in use
Common parts Error and warning area (1) Projector status (2)
Green: projector works correctly Red cross : projector has errors
Yellow triangle : projector has warnings
C
1 2
B
1 2
A
A
1 2
Local LCD screens
Pro ector Address
Serial communication
Network
IR control
DMX
Buttons
Menu PositionLocal LCD
Change Language
Scheduler
Menu structure
Slot Module T peInput Locking
Nati e Resolution
No Signal
EDID
3D*
Image SettingsAspect Ratio
Timings
Image File Ser ices
Sa e Custom Settings
Splash image
Main WindowPiP Window
La out File Ser ices
Same Zoom/Focus
Lamp PowerIdentifcation
Z-axis
Orientation
Lens
Warping
Blanking
Contrast/Intensit
Gamma
Internal patternsColor Space
ScenergiX
Identifcation
Diagnostics
Int. Ser ice Patterns
Factor De ault
USB Memor
Reset Formatter
Refll modeSa e Custom Settings
Auto Dim o ertemp.
Time and Date
INPUT IMAGE LAyOUT LAMPS
ALIGNMENT PROjECTOR CONTROL SERvICE
* Onl a ailable with optional 3D input
www.barco.com/esupportUSA +1 866 374 7878EMEA +32 56 368019APAC
+86 400 88 22726
Support
R5905324 Rev. 01
HDQ-Quickstartguide4.indd 1 9-11-2012 14:22:37
