Upload
phungdieu
View
214
Download
0
Embed Size (px)
Citation preview
1
2.
3.
4.
5.
6.
7.
1.
2.
3.
Bank of Baroda
Interested agencies having experience in work of similar nature & magnitude and fulfilling the
eligibility criteria given below may download detailed tender document from Bank's Website
http:bankofbaroda.com/tenders.asp
Part 'A' envelope (Technical Bid) shall contain : Earnest Money, the documents for satisfying eligibility
criteria & the technical & financial stipulation, if any, of the tenderer & Part 'B' shall contain :
financial/price bid along with a copy of the tender document, duly signed in all pages both shall be
separately sealed & submitted in another sealed envelope to the General Manager , Bank of
Baroda, Eastern Zanal Office, BARODA TOWER, Plot No. 38/2, Block GN, Sector-V, Salt Lake City, Kolkata :
700 091, by 3 P.M. on 22.08.2011 along with Earnest money amounting to Rs. 14,000/- by Bank Draft /
Pay order in favour of Bank of Baroda shall be submitted in Part 'A'.
Part 'A'(Technical Bid) will be opened at 4.00 p.m. on 22.08.2011.
Part 'B'(Price Bid) of the tenders will be opened for those only who fulfils the qualifying criteria given in
the tender document. The unopened part 'B' along with Earnest Money deposit for those not fulfilling
qualifying criteria will be returned.
Bank of Baroda, Eastern Zone, Kolkata invites sealed tenders in two bid system for Civil works,Interor
and furnishing work & electrical works at bank's guest house at Prince Anwar Shah road in Kolkata.
The estimated cost of the project is approx. Rs. 14.17 lacs. The work is to be completed within
3(Three) weeks.
(Government of India Undertaking)
NOTICE INVITING TENDER
Clarifications, if any, required on drawings, schedules, specifications, etc. can be obtained from our
Consultant M/s. Alinda, New Santoshpur Main Road .Kolkata - 700 064.Ph No- 033-24250569 or
9433798849.
The Bank reserves the right to summarily reject any or all application without assigning any reason
there of. Bidders are requested to be present at 4.00 pm on 22.08.2011.
MINIMUM ELIGIBILITY CRITERIA (Shall be submitted with Part A of the Offer)
The tenderer should have completed in last three Financial years (i.e. current year & two previous
financial year) in Bank, Govt. or Govt. undertaking and Financial Institutions, Corporate Sectors, etc.
minimum 3 (three) similar type of work (Civil,Interior ,Furnishing & Electrical) costing not less than Rs.
15.00 lacs in single contract. (Work order & completion Report in support must be submitted &
marked annexure-I)
The total contract amount received by the Tenderer during the last 3 financial years should be
minimum as 20.00 lacs per year in contract work. In support of this the Tenderer should submit
audited sheet duly Certified by the Chartered Accountant & marked annexure-II.
The Tenderer should produce Solvency Certificate from any Nationalised / Scheduled Bank for an
amount of 200% of the advertised Tender value marked annexure-III.
1
4.a) The Tenderer shall furnish copies of :
i) IT Registration Certificate with No.
ii) Sales Tax Registration Certificate with No.
iii) Service Tax Registration Certificate with No.
iv) Electrical Contractor's License with No.
v) Electrical Supervisor’s License with No.
5.
a)
b)
c)
d)
e)
List of important plant & machinery available on hand (own) and proposed to be inducted (own &
hired to be given separately) for carpentry & electrical work (marked annexure-X)
List of works completed in the last (three) financial years under Bank / Govt., Semi - Govt. Govt.
undertaking / Corporate Sectors giving description of work, organisation for whom executed,
approximate value of contract at the time of award, date of award and date of scheduled
completion of work, date of actual completion and final value of contract should also be given
(marked annexure-XI)
List of works in hand indicating description of work, contract value, approximate value of balance
work yet to be done and date of award (marked annexure-XII)
Tenderer who will quote the rate must have a local office at Kolkata. This is absolutely essential for
day to day supervision & coordination of the work at site.
All informations are to be fully authenticated & documented failing which the documents submitted will not be
accepted.
- marked annexure - V
- marked annexure - VI
- marked annexure - VII
- marked annexure - VIII
The Tenderer should also submit the following documents along with the Tender.
List of technical persons available on hand, years of their association with the firm & proposed to be
engaged for the subject work, if selected (marked annexure-IX) ;
- marked annexure - IV
2
1.
2.
3.
4.
5.
6.
7
8.
9.
10.
11. The Employer i.e. Bank of Baroda reserves the right to themselves to accept or reject any or all offers
without assigning any reason therefor.
The arrangement for “ Wire Management " is to have prior approval of the employee.
The quoted rates shall remain firm during the entire currency of contract. No price variation for any
causes whatsoever, shall be entertained.
The time of completion shall be 3(three) weeks from the date of placement of order.
The offer shall remain valid for acceptance for a period of 30 days from the date of submission of
offer.
Payments will be made once on completion by the Employer within 15 days after certification of bill
by the Consultant 10% of the total payable amount is to be retained as retention money and will
become due for release after expiry of six months from the date of completion of the installation &
subject to satisfactory maintenance of the executed work.
Tenders addressed to General Manager, Bank of Baroda, Eastern Zonal office and to be submitted at
his office at BARODA TOWER, Plot No. 38/2, Block GN, Sector-V, Salt lake City, Kolkata : 700 091, by 3
P.M. on 22.08.2011, accompanied by Earnest Money amounting to Rs. 14000/- by Bank draft
payable to Bank of Baroda and other documents as mentioned in NIT. Part 'A' of the tenders will be
opened at 4.00 P.M. on the same date.
Contractors will be required to arrange for his own storing. Dismantled materials are to be carted
away from site at own cost and disposed of in conformity with Municipal regulations.
The quoted rates, are to include cost of all materials, labour and or any other material, all statutory
taxes, transport, handling delivery at site and installation, complete in all respect, as per drawing,
directions or instructions of Employer/Consultant. The quoted rates are also to include dismantling of
partitions, counters, old electrical wirings etc. and stacking serviceable materials and disposal of
debris, etc.
Prior approval of the Employer/ Consultant shall be obtained for colour and thickness of laminates to
be used in the work.
GENERAL TERMS & CONDITIONS
The tenderer is to visit the site and acquaint himself with site conditions before quoting rates.
3
SPECIFICATION OF MATERIALS FOR INTERIOR WORK
Sl.No. Description
1. Laminate
2. Ply & Block Board
3. Glass
4. False Ceiling & Accessories
5. Veneer
6. Textured Wall Paint
7. Glue
8. Locks
9. Aluminium Hardware Fittings Metako / Allen / Crown with ISI Mark
10. Brass Hardware
11. Floor Spring
12. Screws
13. Casters
14. Sliding Drawers / Channels
15. Furnishing Fabric
16. Leather Foam
17. PVC Flooring
18. Carpet Glamour or Favourite (Balla Industries)
Make (s)
Woven type "Harmony" range from "Vimal" or
equivalent
Bhor Industries or equivalent
Armstrong / Krishna / Premier
Nettle Fold
Efficient Gadjets
Earl Behari / Efficient Gadjets
Durian / Century / Archid
ICI, Jenson & Nicholson / Asian paint / Berger
ICI, Spectrum, Heritage
Godrej / Secur / Yale
Brass Arts / Vijoy
Evrite Agencies Pvt. Ltd. / Nita Floor Spring
India Gypsum Ltd.
Marino / Greenlam / Century / Archid
Green / Century / Archid / Austin
Modi / Indo Ashahi / Float Glass India Ltd.
4
SPECIFICATIONS OF MATERIALS FOR ELECTRICAL WORK
Sl.No. Description
1. Switch fuse / fuse switch units (HRC) (32A TPN &
above)
2. Timer (TSQ 100)
3. Voltmeter & Ammeter
4. Voltmeter & Ammeter selector switches
5. Phase indicating lamp
6.
7. Capacitor
8. HRC fuses
9. Power Cable : XLPE
10.
11. HRC fuse base & carriers.
12. PVC terminals
13. 1.1 KV grade PVC insulated armoured
aluminium cable (ISI marked)
14. 1.1KV 660V grade PVC insulated & sheathed /
insulated copper wire & flexible cords (ISI
marked).
15. Moulded case circuit breaker
16. RCCB / ELCB
17. Switch fuse with rewirable fuses. (6A & 32A TPN)
18. Isolator
19. Changeover switch (on load type)
GE Power/SIEMENS/L&T/SCHNEIDEV
ELMEX / ESSEN
KENBAR / HAVELLL’S / ELCON / HPL /
CONTROL & SWITCHGEAR.
HAVELL’S / STANDARD
HAVELL’S / STANDARD
LEGRAND/ SIEMENS / L&T
Vaishno / SIEMENS / ROSS controls
A E / KAPPA SEGC & CONTROLS / CONTROL
SWITCHGEAR
UNIVERSAL / GLOSTER / NATIONAL / NICCO /
FINOLEX/HAVELL'S
L & T / SCHNEIDER/LEGRAND
GE power / SIEMENS / L&T / Schneider
A. E. / IMP
Make (s)
L & T
NATIONAL/FINOLEX/ HAVELLS
KAYCEE / L & T
CROMPTON/SIEMENS
TATA LEVERT/NEUMERIC/ KIRLOSKAR
GLOSTER/INCAB/POLYCAB/CINOLEX
GE power / SIEMENS / L & T / SCHNEIDER
5
Sl.No. Description
20. MCB distribution board
21. Distribution fuse board with rewireable fuses
22. Miniature circuit breaker / MCB type isolator
23. Contractors
24. Auxiliary contractor
25. 1/16 Amp Piano key type switch / flushed type
plug socket
26. 6/16 Amp modular switch / socket, module
plate & mounting M.S. / PVC box.
27. 300W, 2 module electronic regulator
28. Ceiling rose
29. Holder
30. Buzzer / call bell
31. Luminous indicating type buzzer with
cancellation push.
NATIONAL / HOMA / EQUIVALENT
32. Alarm bell.
33. G.I. pipe
34. Steel conduits (conforming to IS in all respects)
35. Black enamelled
36. Galvanised
Make (s)
LEGRAND/ SIEMENS
CPL (Genius) / ANCHOR (Roma) / CRABTREE /
MK
ANCHOR (Roma) / CRABTREE / MK
ANCHOR / PRECISION / SSK & RIDER
SIEMENS / L & T/BCH
SIEMENS / L & T
LEGRAND / SIEMENS
Good local make with minimum wall thickness of 3
mm. for 19 / 20 mm. and 25mm sizes & 2.5 mm. for
12mm. sizes
BEC / SUPREME / AKG
BEC / SUPREME / AKG
BST / BANSAL
KHERAJ / GETCO
BAJAJ / ANCHOR / NATIONAL / HOMA
KAY / EPP / ANCHOR / JJ
HAVELL’S / BPC / BOSMA
KAY / EPP / ANCHOR / JJ
6
Sl.No. Description
37. Non-metallic PVC conduit pipe
38. Compression type brass gland
39. Cable termination socket
40. Light fitting & lamps
41. Decorative/Ornamental /Chandelier / Light
Fittings
42. Ceiling Fan
43. Exhaust fan
44. Industrial type socket & top
45. Telephone wire
46. Telephone Socket
47. Network Cable
48. Contractors
49. STARTERS NORTH WEST / CABTREE
CROMPTON / POLAR / KHAITAN
HAVELL’S / CROMPTON / LEGRAND
FINOLEX / RRK/NATIONAL
CRABTREE/MK
CROMPTON / POLAR / KHAITAN / EPC
WIPRO or equivalent
DOWELLS / JOHNSON / COMET
PLAZA / KALINGA/ PRECISION/AKG or
equivalent
FINOLEX or equivalent
L & T / SIEMENS
CROMPTON / POLAR / KHAITAN
Make (s)
DOWELL'S
7
RS.
RS.
RS.
TOTAL RS.
SECTION - II : Interior & furnishing works
FOR
Bank's guest house at at Prince Anwar Shah Road,Kolkata
CIVIL,INTERIOR FURNISHING & ELECTRICAL WORKS
SECTION - I : Civil and S&P upgradation works
BANK OF BARODA
GENERAL SUMMARY of Price Bid
SECTION - II : ELECTRICAL WORK
(-)
(-)(-)
(-)
8
CIVIL WORKS-UPGRADATION GUEST HOUSE-BOB
Sl. No. Item Unit Quantity Rate Amount(Rs.)
1.00 Stripping of worn out plaster and racking out joints ofwalls , ceilings etc. upto any height and in any floorincluding removing rubbish with in a lead of 75 metreas directed sqm. 120
2.00 Removal of rubbish, earth etc. from the working siteand disposal of the same, beyond the compound, inconformity with the Municipal/Corporation Rules forsuch disposal, loading into truck and cleaning the sitein all respect as per direction of Engineer-In-Charge cum. 10
3.00 Supplying and laying true to line and level vitrified tiles of approved brand size not less than 600mm x 600mm x 10mm thick in floor , skirting etc. using polymerised adhesive (as per manual of the applicator ) over existing floor finish , after preparing the same by means of cleaning , scrapping as necessary for existing floor, joints grouted with admixture of white cement and colouring pigment to match with colour of tiles complete finishing in all respect as per instruction----- in all floors(a) Deep colour and white sqm. 160
4.00 Supplying, fitting & fixing 1st quality Ceramic tiles inwalls and floors to match with the existing work & 4 nos.of key stones (10mm) fixed with araldite at the back ofeach tile & finishing the joints with white cement mixedwith colouring oxide of required to match colour of tilesincluding roughening of a concrete surface if necessaryor by synthetic adhesive and grout materials etc.
(B) WallWith sand cement mortar (1:3) 15 mm thick and 2 mmthick cement slurry at back side of tiles using cement @2.91 Kg/sq.m and joint filling using white cement slurry@ 0.20 Kg/sq.m(a) Area of each tile upto 0.09 sq.m(i) Coloured decorative
(a) In all floors Sqm 48
5.00 Easing of doors and windows each 30
6.00 Hydraulic door closer of approved quality as per ISIstandard fitted and fixed complete. ------------In all floors a) Heavy type (ISI Size-3) each 2
B-O-Q & ESTIMATE OF BANK OF BARODA GUEST HOUSE AT P.A. SAHA ROAD
Upgradation of Guest House of BOB at Prince Anawar Shah Rd. Bldg. Consultant : ALINDA
CIVIL WORKS-UPGRADATION GUEST HOUSE-BOB
Sl. No. Item Unit Quantity Rate Amount(Rs.)7.00 Anodised aluminium barrel/tower/socket bolt (full
covered) of approved quality manufactured fromextruded section conforming to(I.S. 204-74) fittedand fixed with cadmium plated screwvii) 225 mm. long x 10 mm. dia bolt each 30
8.00 Anodised aluminium Aldrop/Sliding bolts/ hasp boltapproved quality manufactured from extruded sectionconforming to I.S. specification (I.S. 2681-66) fitted andfixed complete :
iii) a) 300 mm. x 16 mm. dia bolt each 30
9.00 Anodised aluminium D-type handle of approved qualitymanufactured from extruded section conforming to ISspecification (IS:230-72) fitted and fixed complete :
a) With continuous plate base (hexagonal/round rod) vii) 150 mm. grip x 12 mm. dia rod each 30
10.00 Supplying, fitting and fixing in position approved P.V.C.door frame made from extruded P.V.C. multichamberhollow section having dimensions 60 mm. x 50 mm./60mm. x 53 mm and suitably reinforced, horoizontalscrews after inserting two number steel brackets asreinforcement making suitable space for placinghinges, one steel tube 40 mm. x 20 mm. x 18 gaugewill be inserted on one full vertical side of the frame(hinge side) as reinforcement, the frame will then befixed in the opening with the help of P.V.C. expandablefastner and steel screws i/c. cost of all materials and labour hire charges of tools and appliances, carriage ofall materials, taxes & all other incidental chargescomplete----------------------------------------- [In all floors] per Mtr. 20
11.00 Supplying, fitting and fixing P.V.C. door shutter ofapproved quality and shade in position, the style andrail of the P.V.C. door shutter will be made of rigidP.V.C. multicavity hollow chamber of suitable size andsection will 2.5 mm. wall thickness the section willhave two nos. built in beads, horizontal and verticalsection shall be fixed by each other by a self tappingscrews and 2 nos. of M.S. tubular galvanised bracket oflength 200 mm. x 80 mm. and other 100 mm. x 100mm. both 18 gauge in each corner of the shutter framefor placing hinges, polymer based multicavity hollowsection of 2.5 mm. wall thickness will be fitted in themiddle with aluminium cleat and steel screws as lockrail, the section frame will then be fitted in by polymerbased panels of suitable size and 2 nos. of 6 mm. diabright rod will be inserted horizontally with both sidecheck and nut system and stretches where fixing ofhinges/hasp bolt/tower bolt/door ring are required to bestrong enough it with stand wear and tear. The rate is
Upgradation of Guest House of BOB at Prince Anawar Shah Rd. Bldg. Consultant : ALINDA
CIVIL WORKS-UPGRADATION GUEST HOUSE-BOB
Sl. No. Item Unit Quantity Rate Amount(Rs.)inclusive of cost of 100 mm. Anodised aluminiumhinges and cost of all materials and labour hirecharges of tools and plants and appliences. Carriage ofall materials, taxes & all other incidental chargescomplete. ------------------------------- In all floors
a) 37 mm. thick shutter with 20 mm. thick panel (wallthickness 1.2 mm.) & 90 mm. width stiles and railswith lock rail 105 mm. per sqm. 4.2
12.00 Plaster (to wall, floor, ceiling etc.) with sand andcement mortar i/c. rounding off or chamfering cornersas directed and ranking out joints or roughening ofconcrete surface, i/c. throating, nosing and drip coursewhere necessary ---------------------------------[All Floors]
ii) 20 mm. thick plaster (6:1)in all floor sqm. 100
iii) 10 mm. thick plaster with 3:1 cement moterin all floors sqm. 20
13.00 Supplying fitting and fixing of 18/20mm thick granitecooking platform of approved texture and shade with necessary smoothening of edge fixed with cement morter and epoxy as per drawing and instruction sqm. 4.1
14.00 Neat cement punning above 1.5 mm. thick in walldado, window, sills, floor, drain etc.--------- In all floors sqm. 6
15.00 Rendering the surface of walls and ceiling with plaster of paris (thickness not less than 1.5 mm.) Sqm 120
16.00 Removing loose scales, blister etc. from old paintedsurface and thoroughly smoothening the surface tomake the same suitable for receiving fresh coat ofpaint sqm. 140
17.00 Scraping and removing greasy soot from walls orceiling of kitchen or similar smoke affected rooms andpreparing the surface sqm. 60
18.00 Applying interior grade acrylic primer of approved quality and brand on plastered or concrete surface oldor new surface to receive distemper /acrylic emulsion paint including scrapping and perparing the surface thoroughly , complete as per manufacturer's specification and direction of EICTwo coats sqm. 820in all floors
Upgradation of Guest House of BOB at Prince Anawar Shah Rd. Bldg. Consultant : ALINDA
CIVIL WORKS-UPGRADATION GUEST HOUSE-BOB
Sl. No. Item Unit Quantity Rate Amount(Rs.)
19.00 Acrylic distemper to interior wall, ceiling with a coat of solvent based interior grade acrylic primer ( as per manufacturer's specifications ) including cleaning andsmoothening of surface sqm. 820
20.00 Priming one coat on timber, plastered surface with synthetic enamel/oil boundprimer of approved quality i/c. smoothening surfacesby sand papering etc. sqm. 60
21.00 Priming one coat on steel orother metal surface with synthetic enamel/oil boundprimer of approved quality i/c. smoothening surfacesby sand papering etc. sqm. 45
22.00 Painting with best quality synthetic enamel paint ofapproved make and brand i/c. smoothening surface bysand papering etc. i/c. using of approved putty etc. onthe surfaces, if necessary :a) On timber or plastered surface with super gloss (Hi gloss):iv)Two coats (with any shade except white) sqm. 60b) For Steel or Metal Surfaceiv)Two coats (With any shade except white) sqm. 45
23.00 Supplying best Indian sheet glass panes set in puttyand fitted and fixed with nails and putty complete In all floors :b) 4 mm. thick sqm. 10
24.00 Anti termite treatment to the juction of wood work andmasonary walls with chemical emulsion by admixing chloropyrifox emulsifiable concentrates (1%concentra -tion ) with water by weight including spraying at the points of contact with the adjoining masonary by drilling 6m holes at a downward angle of about 45 degreeat the junction of woodwork and masonary and spuirting …chemical emulsion into these holes at the rate of half litre per hole .The entire work is to be carried out as per specification of Code I.S.-6313 (Part-III)-1981. Sq.M. 640
25.00 Spot application for insecticides using aqua base sprey for pest ( for bugs, cockroaches, silverfish, termites etc ) to walls and ceiling etc. with chemical emulsion by admixing chloropyrofos emulsifiable concentrates (1% concentration ) with water by weight including spraying the emulsified chemical @0.5 ltr. Per sqm. on wall surfaces , ceiling , electrical lines including drilling holes in places where source of termite is detected squirting chemical solution into the holes and sealing with cement grout , finish in all respect. sqm. 170
Upgradation of Guest House of BOB at Prince Anawar Shah Rd. Bldg. Consultant : ALINDA
CIVIL WORKS-UPGRADATION GUEST HOUSE-BOB
Sl. No. Item Unit Quantity Rate Amount(Rs.)
SANITARY & PLUMBING FITTINGS AND FIXTURESSupplying fittings and fixing of following s&p fittings and fixtures of Jaquar / Sera or similar make whereapplicable as per approval of the authority
26.00 wall mounted E.P.W.C. with matching 12 ltr. cistern complete with all fittings and fitures no. 4
27.00 Ablusion shower of approved brand and make no. 4
28.00 White vetrious hand wash basin 550x350with necessary bottle trap, stop cock etc. complete no. 4
29.00 Swan-neck piller cock for sink no. 2
30.00 Chromium plated piller cock no. 4
31.00 Chromium plated shower rose no. 4
32.00 Chromium plated Towel rod 600 long no. 4
33.00 Chromium plated Towel ring 150 dia no. 4
34.00 Chromium plated soap tray no. 4
35.00 500x750 glass mirror with matching front tray no. 4
36.00 Stainless steel sink with drain board for kitchen no. 2
37.00 Removing and replacing loft tank of 100 ltr. Capacityof approved brand & make along with necessaryclamps and other accessories as applicable complete no. 2
38.00 Supplying fitting and fixing of necessary plumbing and waste pipe lines , both PVC and GI as applicable for the completion of the 04 no. toliet & 02 nos. kitchens L.S.
Upgradation of Guest House of BOB at Prince Anawar Shah Rd. Bldg. Consultant : ALINDA
CIVIL WORKS-UPGRADATION GUEST HOUSE-BOB
Sl. No. Item Unit Quantity Rate Amount(Rs.)
EXTERNALSURFACE &GR. FL. ENTRANCE LOBBY PAINTING
39.00 Stripping of worn out plaster and racking out joints ofwalls , ceilings etc. upto any height and in any floorincluding removing rubbish with in a lead of 75 metreas directed sqm. 105
40.00 Plaster (to wall, floor, ceiling etc.) with sand andcement mortar i/c. rounding off or chamfering cornersas directed and ranking out joints or roughening ofconcrete surface, i/c. throating, nosing and drip coursewhere necessary ---------------------------------[All Floors]
ii) 15 mm. thick plaster (4:1)in all floor sqm. 105
41.00 Scraping of moss, blisters etc. throughly from exteriorsurface of walls necessitating the use of scraper, wirebrush etc. as per direction of the(external surface)
sqm. 595
42.00 Applying exterior grade Acrylic primer of approved quality and brand on plastered or concrete surface oldor new surface to receive decorative textured ( mattfinish ) or smooth finish acrylic exterior emulsion paintincluding scrapping the surface thoroughly , complete as per manufacturer's specifications and direction of Engineer in chargeIn all floorsTwo coats sqm. 700
43.00
In all floor.(i) Two Coats (a) On cement plaster surface. sqm 700
44.00 Applying plastic emulsion of approved make and brand on walls and ceiling including sand papering in
termediate coats including putty (to be done under specific instruction).
a) Two coats. sqm. 210
45.00 Priming one coat on steel orother metal surface with synthetic enamel/oil boundprimer of approved quality i/c. smoothening surfacesby sand papering etc. sqm. 180
Protective and decorative textured exterior high classmatt finish, composed of specials Thermoplastic resincontaining fine crystalline additives drive from Gramte
Upgradation of Guest House of BOB at Prince Anawar Shah Rd. Bldg. Consultant : ALINDA
CIVIL WORKS-UPGRADATION GUEST HOUSE-BOB
Sl. No. Item Unit Quantity Rate Amount(Rs.)
46.00 Painting with best quality synthetic enamel paint ofapproved make and brand i/c. smoothening surface bysand papering etc. i/c. using of approved putty etc. onthe surfaces, if necessary :a) On timber or plastered surface with super gloss (Hi gloss):iv)Two coats (with any shade except white) sqm. 0b) For Steel or Metal Surfaceiv)Two coats (With any shade except white) sqm. 180
47.00 Removal of rubbish, earth etc. from the working siteand disposal of the same, beyond the compound, inconformity with the Municipal/Corporation Rules forsuch disposal, loading into truck and cleaning the sitein all respect as per direction of Engineer-In-Charge cum. 6
Total Cost of Civil Works for Upgradation
Say Rs.
Upgradation of Guest House of BOB at Prince Anawar Shah Rd. Bldg. Consultant : ALINDA
ELECTRICAL ESTIMATE GUEST HOUSE OF BOB
ItemNo. Description Unit Quantity Supply Installation Supply Installation Remarks
A. CONCEALED WIRING(Including supply of materials, groove cutting inwall / floor and makig good damage to originalfinish)
A1) Point wiring for Light/Fan/Exhust through pre laidconcealed conduit. These include:
a) 2 nos. 1.5 Sq.mm PVC insulated (FRLS) strandedcopper wire 1100V grade. (Make- Polycab, Finolex, Mescab or other similer make)
b) 1 no. 1.5 Sq.mm PVC insulated (FRLS)strandedcopper wire 1100V grade for earthing.
c) 16 SWG G.I. Junction Box (100x100x62 mm) with5 mm thick acrylic cover and fixing accessories.
d) 1.6mm(16 SWG) thick painted MS switch box
e) 6A, 240V Moduler switch to be mounted onswitchboard .
B-O-Q & ESTIMATE FOR ELECTRICAL WORKS OF GUEST HOUSE OF BOB AT P.A. SHAH RD
Unit Rate (Rs.) Total (Rs.)
Upgradation of Guest House of BOB at P.A.Shah Rd. Consultant ; ALINDA
ELECTRICAL ESTIMATE GUEST HOUSE OF BOB
ItemNo. Description Unit Quantity Supply Installation Supply Installation Remarks
Unit Rate (Rs.) Total (Rs.)
f) Required module number of mounting frame withsheet cover
g) A two/three way circular box to be provided foreach light point in brick wall.
i) - Length upto 6 metre Nos. 42
Note :
i) Min 2 nos. PVC conduit of 20mm dia to be laidbetween switchboard and junction box which isvertically in the same line with the switch board, ifrequired.
ii) All junction boxes shall be mounted in the samelevel in their respective room.
iii) Vertical position of junction box shall be fixed inthe same line with the switchboard.
A2) 6A receptacle (RA Type) wiring from nearestJB/Switch Board to independent 6A, 5 pin, 240Vreceptacle by supplying & laying of 1100V grade 2-1/Cx1.5 Sq.mm + 1-1/Cx1.5 Sq.mm for earthingPVC insulated (FRLS) copper wire through PVCconcealed conduit in wall/floor with groove cuttingand making good damage to original finishincluding supply of necessary sheet metal pull box/circular box with 5mm thick acrylic sheetcover(Make- Polycab,Finolex, Mescab or othersimiler make)
Meter 50
Upgradation of Guest House of BOB at P.A.Shah Rd. Consultant ; ALINDA
ELECTRICAL ESTIMATE GUEST HOUSE OF BOB
ItemNo. Description Unit Quantity Supply Installation Supply Installation Remarks
Unit Rate (Rs.) Total (Rs.)
A3) 16/6A (RB Type) receptacle wiring fromDistribution Board/nearest JB to independent16/6A, 6 pin, 240V receptacle by supplying &laying of 1100V grade 2-1/Cx2.5 Sq.mm + 1-1/Cx1.5 Sq.mm for earthing PVC insulated copperwire through PVC concealed conduit in wall withgroove cutting and making good damage tooriginal finish including supply of necessary sheetmetal pull box/ circular box with 5mm thick acrylicsheet cover (Make- Polycab,Finolex, Mescab orother similer make)
Metre 30
A4) Circuit wiring from Distribution Board/nearest JB toSwitch Board by supplying & laying of 1100Vgrade 2-1/Cx2.5 Sq.mm + 1-1/Cx1.5 Sq.mm forearthing PVC insulated (FRLS) copper wirethrough PVC concealed conduit in RCC slab/wallwith groove cutting and making good damage tooriginal finish including supply of necessary sheetmetal pull box/ circular box with 5mm thick acrylicsheet cover
Metre 35
A5) Sub Main wiring or power unit for A.C wiring bysupplying & laying of 1100V grade 2-1/Cx4 Sq.mm+ 1-1/Cx2.5 Sq.mm for earthing PVC insulated(FRLS) copper wire through prelaid PVCconcealed conduit in wall with groove cutting andmaking good damage to original finish includingsupply of necessary sheet metal pull box/ circularbox with 5mm thick acrylic sheet cover(Make-Polycab,Finolex, Mescab or other similer make)
Meter 30
Upgradation of Guest House of BOB at P.A.Shah Rd. Consultant ; ALINDA
ELECTRICAL ESTIMATE GUEST HOUSE OF BOB
ItemNo. Description Unit Quantity Supply Installation Supply Installation Remarks
Unit Rate (Rs.) Total (Rs.)
A6) Main wiring by supplying & laying of 1100V grade4 core16 Sq.mm AL /A cable+ 2 nos 8 SWG GIwire for earthing through in wall with necessarytermination and clamping or groove cutting andmaking good damage to original finish .(Make-Laser, crystal .Hevell's or other similer make)
Metre 20
B. DISTRIBUTION BOARDS
[As per Dwg. and Specification]
B1) LIGHTING/ POWER TPN DISTRIBUTIONBOARD
Nos 2Supply and Installation of sheet steel (1.2 mm
thick) enclosed, double door, wall mountedDistribution Boards complete with necessarymounting, internal wiring and conduiting .(Make-Hevell's , ABB or other similer make)
a) Incomer with63A, 415V, 4P, RCCB (100mA) - 1 No.
b) Busbar415V, 63A, 3 PH, 4W, 50 Hz, 10 KA busbar - 1No.
c) Outgoing with6A - 32A, SP MCB (C curve) - 18 Nos.
Upgradation of Guest House of BOB at P.A.Shah Rd. Consultant ; ALINDA
ELECTRICAL ESTIMATE GUEST HOUSE OF BOB
ItemNo. Description Unit Quantity Supply Installation Supply Installation Remarks
Unit Rate (Rs.) Total (Rs.)
C) RECEPTACLES
C1) Supply and Instalation of 16/6A, 6 Pin, 240Vreceptacle (RB type) with safety shutter and 16Amoduler type switch complete with M.S. Box andmounting frame with cover plate.(Make- Anchor ,MK, ABB or other similer make)
No. 8
C2) Supply and Instalation of 6A, 5 Pin, 240Vreceptacle (RA Type) with safety shutter and One6A moduler type switch for complete with M.S.Box and mounting frame with cover plate.(Make-Anchor , MK or other similer make)
No. 10
C3) Supply and Instalation of RJ 12 telephone socketcomplete with M.S. Box and mounting frame withcover plate.(Make- Anchor , MK , ABB or othersimiler make)
No. 2
C4) Supply and Instalation of RJ 45 computer socketcomplete with M.S. Box and mounting frame withcover plate.(Make- Anchor , MK , ABB or othersimiler make)
No. 2
C6) Supply and Instalation of fan speed electronicregulator moduler type to be mounted in switchboard complete with wiring by 1Cx1.5 sqmm PVCinsulated wire.(Make- Anchor , MK or other similermake)
No. 8
Upgradation of Guest House of BOB at P.A.Shah Rd. Consultant ; ALINDA
ELECTRICAL ESTIMATE GUEST HOUSE OF BOB
ItemNo. Description Unit Quantity Supply Installation Supply Installation Remarks
Unit Rate (Rs.) Total (Rs.)
D. CONDUIT
Supplying & laying of PVC conduit to be fixed inwall / floor after proper chasing. The wall/floor tobe finished as it was before, after embedding theconduit. (Make- AKG , PICISION or other similermake)
D1) i) The following sizes of conduits
a) 20 mm dia Metre 300
b) 25 mm dia Metre 40
D2) Supply and Installation of flexible PVC Conduit offollowing sizes :
a) 20 mm dia Metre 10
b) 25 mm dia Metre 10
D3) Supply and installation of medium duty G.I.Conduit/Pipe of following sizes including allnecessary accessories required for fixing theconduit on brick wall.(Make- TATA, AKG or othersimiler make)
a) 25 mm dia conduit/pipe Metre 20
Upgradation of Guest House of BOB at P.A.Shah Rd. Consultant ; ALINDA
ELECTRICAL ESTIMATE GUEST HOUSE OF BOB
ItemNo. Description Unit Quantity Supply Installation Supply Installation Remarks
Unit Rate (Rs.) Total (Rs.)
E) MISCELLENEOUS ITEMS
E1) Supply and drawing of DIA 0.5 mm, three pairTelephone Cable with necessary conection asrequired (Make- Polycab,Finolex, or other similermake)
Meter 20
E2) Supply and fixing TPN 63A MCB (C curve) withsheet steel encloser in iron fream with necessaryconnection as required ( Make- L&T,Havell's, ABBor other similer make)
No 2
E3) Supply and fixing flush-type power unit completeof DP MCB,SP starter ( 4.75A-7.50A), socket &plug with indicating light with necessary mountingand connection as required for 1 Ton A.C Unit (Make- Northwest or other similer make)
No 6
E4) Supply and fixing of fan hook for hanging ceilingfan with all necessary mounting as required
No 8
E5) Supply and fixing of 600 mm sweepstanding/padestal fan with all necessary mountingand connection as required (Make- USHA ,ORIENT or other similer make)
No 4
Upgradation of Guest House of BOB at P.A.Shah Rd. Consultant ; ALINDA
ELECTRICAL ESTIMATE GUEST HOUSE OF BOB
ItemNo. Description Unit Quantity Supply Installation Supply Installation Remarks
Unit Rate (Rs.) Total (Rs.)
E8) Supply and fixing of 1200 mm sweepceiling fanwith all necessary mounting and connection asrequired (Make- USHA , ORIENT . Hevell's orother similer make)
No 8
E9) Supply and fixing of 300 mm dia exhust fan withlouver and all necessary mounting and connectionas required (Make- USHA , ORIENT, Hevell's orother similer make)
No 4
E10) Supply and fixing of TL luminaires like Philipsmake TMS 2005/140, 1X TL 40W lamp with allnecessary accessaries like ballast ,mountingarrangment & connection as required (Make-Philips , Bajaj or other similer make)
No 8
E11) Supply and fixing of TL luminaires like Philipsmake TMS 15/120, 1X TL'D 18W/ TL 20W lampwith all necessary mounting & connection asrequired (Make- Philips , Bajaj or other similermake)
No 6
TOTAL
GRAND TOTAL OF ALL ELECTRICAL WORKS
Upgradation of Guest House of BOB at P.A.Shah Rd. Consultant ; ALINDA
ESTIMATE FOR FURNITURES AND FURNISHINGS OF GUEST HOUSE OF BOB AT P.A. SHAH RD.
SI.No. Description Unit Quantity Rate(Rs.) Amount (Rs.)
1.0 (1500x2000) Wooden double bed ZUARI Optima model English cot or similar make no. 2
2.0 (900x2100) Wooden double bed ZUARI Optima model English cot or similar make no. 4
3.0 Wooden dressing table ZUARI Cosmo or similar make no. 2
4.0 Wooden stool ZUARI Cosmo or similar make no. 2
5.0 Wooden 2 door wardrobe ZUARI Cosmo no. 4 or similar make
6.0 Wooden bed side t5able ZUARI Cosmo no. 4 or similar make
7.0 Wooden dining table with glass top (1500x1000) no. 2
8.0 Wooden dining chair no. 12
9.0 Zeon fabric sofa 3+1+1 ZUARI living furniture orsimilar make no. 2
10.0 Mini wall unit for T.V. & book shelf ZUARI living furniture or similar make no. 2
11.0 Centre Table size 80x40x45 ZUARI living furniture or similar make no. 2
12.0 wooden cabinet with steel shelf for kitchenand drawers with telescopic channels as per design no. 2
13.0 Relaxon mattress for double bed (1500x2000) no. 2
14.0 Relaxon mattress for double bed (900x2000) no. 4
15.0 Reliance pillow no. 8
16.0 Chromium plated curtain holder with Fabrick curtain for doors & windows no. 18
17.0 Bed spread for Double Bed set of approved brand no. 2
18.0 Bed spread for Single Bed setof approved brand no. 4
TOTAL COST FOR FURNISHINGS
Note : All items to supplied as per approval of the architect / authority and as per design where applicable.