Bang & Olufsen BtB –How to update the BtB module

1. Connecting

• Connect the PC to the RS232 port on the TV. Use the RS232 cable (Thin cable. DSUB9 to Minijack)

– RS232 is called “1 HOTEL DATA” on BV10.– On BeoVision 7-40 use the port labeled ‘RS232’– On BeoSystem 3 use the port labeled ‘RS232’

BeoVision 8/10 BtB module BeoVision 7-40 back

RS232 port and OC is not always left and right.On BV10-40 and 46” RS232 is located to the right, when looking from behind.One BV10-32 RS232 is located to the left.On BeoVision 10, RS232 is always called ”1 HOTEL DATA” and OC is always called ”3. Service”

1. Connecting

• Connect the PC to the RS232 port on the TV. Use the RS232 cable (Thin cable. DSUB9 to Minijack)

– RS232 is called “1 HOTEL DATA” on BV10.– On BeoVision 7-32 use the P2 connector.

BeoVision 7-32 back

2. Updating the module

• Open the BtB upgrader.• Follow the instruction of the BtB upgrader and press Start.

Bang & Olufsen Concept Store

Bang & Olufsen Concept Store

3. Verify software version

• First disable the BtB mode by pressing “Menu, 0, 0, GO” on the remote, if this has already been set.

• Turn the TV on and press Menu

• Move the cursor to the OPTIONS menu and press “0, 0, GO”. Now choose the Business To Business menu.

TV SETUP

TUNING

SLEEP TIMER

▼select accept o

OPTIONSSERVICE MENU

MONITORTV-TUNERBUSINESS TO BUSINESSDVB SERVICEPRODUCT TYPEAUDIO SERVICESETTINGS

▼select accept o

BUSINESS TO BUSINESS

3. Verify software version

• In the Business To Business menu in the TV service menu, you can find the BtB application software version (in this case 6.62v).

• In here you will also be able to enable or disable the BtB mode.

BUSINESS TO BUSINESS

BTB ENABLE OFF

BTB SETTINGSBTB VERIFICATION TESTBTB INSTALLATION SETUP

STBC POWER ON 5 VBTB AP SW 06.62vBTB M-STB ID Unknown

▼select accept o

BTB ENABLE OFF

The End