FLY-LLX225-DA-EN-R1 Page 1 of 2
All specifi cations are non contractual and are subject to
change without prior notice
1805
www.balteau.com
BALTOSPOT LLX225-DA
BALT
OSPO
T LL
X225
-DA
Available in 600 or 900W
BALTOSPOT LLX225-DA
High voltage range:
Tube current range:
Beam angle:
Inherent Filtration (mm):
Anode cooling type:
Duty cycle:
Insulation:
Mains:
Temp. switch:
Weight (without rings):
Tubehead:
Control Unit:
5 to 225 kV
0,5 to 12 mA
60° x 40°
0,8 Be
Air
100%
SF6 gas
180 - 260V
70°C
20 kg
Metal-Ceramic
DC1 or Hand-XD
The LLX225-DA is a high frequency constant potential Directional
Air cooled, portable X-ray generator from the LLX Series that can
be used in combination with digital detectors.
LLX is the latest result of 65 years of expertise of Balteau in
portable units combined to 25 years of Constant Potential equipment
manufacture. LLX is the answer to your requirements for fi eld
inspection especially where quality requirements and speed of
inspection are essentials. The specifi c shape given to the head of
the generator makes it easier to use on fi eld where space is
always restricted for instance in aerospace applications.
LLX is controlled by a full digital control unit (DC1) using the
energy saving concept of the BALTOSPOT series and our well known
Hand-X® wireless remote control that is also available for your
best safety.
MECHANICAL DRAWING
High precision adjustable centering device
Low weightErgonomic rubber handleExtremely small head
diameterFull automatic preheating processLow power requirement
Cables with reduced size and weightCan be delivered with our 900g
Hand-XD including a Geiger-Müller detectorRS232 serial link
designed to be connected to digital detectors (eg. XPro Series) and
computersWorks on power generatorCANON mil. metallic connectors
Aeronautics, composites & plasticsBuilding sitesDigital
applications (fl at panels, CR or linear detectors)X-ray
cabinets
Extremely stable dose output for digital applicationConstant
potential high frequencygeneratorCurrent up to 12 mAMetal-ceramic
tubeTwo focal spot available with beryllium windowEnergy recovery
moduleSecurity fi rst, x-ray start with 2 buttons
MAIN FEATURES
KEY ADVANTAGES
MOST COMMON APPLICATIONS
INTERNATIONAL
CE certifi ed
NFC74-100 LCIE Certifi ed
FLY-LLX225-DA-EN-R1 Page 2 of 2
All specifi cations are non contractual and are subject to
change without prior notice
1805
BALTOSPOT LLX225-DA
BALT
OSPO
T LL
X225
-DA
LLX225-DA-0
* FFD= 700mm/Film Carestream Industrex AA400/D=2.0/t=10min.
High voltage range: kV
Tube current range: mA
Beam angle:
Focal spot size (EN12543):
Focal spot size (IEC336):
Maximum anode power dissipation: Watt
Steel penetration at max (*): mm
mm
mm
Max recommended temp.:
Temperature switch:
°C
°C
Inherent fi ltration: mm (Be)
Anode cooling type:
Duty cycle: %
Mains: V
Weight (without rings): Kg
Tubehead:
Control unit:
Specifi cations Units
5 - 225 5 - 225
0,5 - 12 0,5 - 12
60° x 40° 60° x 40°
1,0
0,4 x 0,4
3,0
1,5 x 1,5
600 900
44 48
50°
70°
50°
70°
0,8 0,8
Air Air
100 100
180 - 260 180 - 260
20 20
Metal-Ceramic Metal-Ceramic
DC1 or Hand-XD DC1 or Hand-XD
LLX225-DA-1
DC1kV min step:mA min step:Time min
step:Memories:Display:Mains:Weight:
Hand-XD (Wireless remote control)kV min step:mA min step:Time
min step:Memories:Display:Battery:Weight:
10,11 sec up to 99min 59sec100 last exposure/memories4 lines,
green back lighting170-260 V9,2kg
10,11 sec up to 99min 59sec100 last exposure/memories4 lines,
green back lighting8h charge capacity900g
Distributed by:Produced by:
Balteau NDTRue Voie de Liège, 12B-4681 Hermalle Sous
ArgenteauBelgium
[email protected]. +32 (0) 4 374 75 75Fax
+32 (0) 4 374 75 85
STANDARD EQUIPMENT
OPTIONAL EQUIPMENT
Internal pressure gaugeHeavy duty lock type connector20m
connecting cable for control unit10m power cableCradle with heavy
duty hand ringsHolder for centering device fi lter &
diaphragmBag for accessories
Lead shutterAVARA/PWarning fl ashing light &
repeaterTransport case4 legs adjustable standHydraulic stand100-260
V adapterRS232 link
