Upload
others
View
0
Download
0
Embed Size (px)
Citation preview
INSTALLATION INSTRUCTIONSFOR STAINLESS STEEL BACKREST
PLEASE READ CAREFULLY BEFORE INSTALLATION Backrest Curved Arm
Bracket �xing coach bolts x 4
Arm �xing bolts x 4
Backrest pad screws x 6
Wall plug x 4
177
614
83
50 m
in. c
lear
ance
450
Grab rail
120-150
460
- 48
0 to
p of
sea
t
97
40
614
83
450
40
120-150
177
460
- 48
0 to
p of
sea
t
97
Grab rail
50 m
in. c
lear
ance
450
450
177
120-150
97
40
460
- 48
0 to
p of
sea
t
614
83
50 m
in. c
lear
ance
Grab rail
Backrest pad x1 Stainless steel body x1 Curved arm R x1
Curved arm L x1
Metal cover x 2
Gasket x 2
Installation for Close Coupled Cistern Installation for Wall Mounted Cistern Installation for Concealed Cistern
Inside the box:
83UP
26
Slide metal covers over curved arms L & R. Attach curved arms to stainless steel body using 4x Arm �xing bolts.
Attach backrest pad using 6 x backrest pad screws as shown in Fig. 3. Ensure all screws are started before tightening. Do not overtighten.
Ensure the angle and the position of stainless steel body is correct as shown Fig 2.
Metal covers
Curved arm R
Curved arm L
Stainless steel body
Arm �xing bolts
Backrest padBackrest pad screws
Installation for di�ernt Toilets and Cisterns
1. 2.
3. 4.
5.
Issue No. 2Date of issue 15.02.2012
Mark position of �xing holes on �nished wall in positions speci�ed in Fig 6. Ensure correct drill hole sizes is selected for timber or masonry installation as speci�ed in Fig 4.
Drill Ø12mmholes formasonary wallinstallation
Drill Ø8mmholes fortimber studinstallation
Fig.1
Fig. 3
Fig. 2
Gaskets
Bracket �xing coach bolts
Fit Gaskets onto wall �xing plate as shown in Fig 5. Attach backrest to wall using 4 supplied Bracket �xing coach bolts
Fig. 5
Fig. 4
Fig. 6
MasonryWall
Fixing Screw Fixing Screw
Timber Wall
Important: For timber stud and non-structural walls, noggins orother suitable means of support must be used to support the backrestat the recommended height.
Wall plug