Competition Terms & Conditions1) Entries shall be submitted by individuals, companies or associations involved in any area of plastic manufacturing process including • Plastic converters • Manufacturers of resins, compounds, masterbatch, and pigment • Manufacturers of machines and molds. • Product/brand owner • Designer • People involved with the plastic industry2) Entries (Products) must be manufactured in ASEAN and commercialized. 3) An applicant can enter as many products in as many different categories.4) An application form is for one entry per category. In case an entrant would like to contend the product in several categories, separate application forms and products for each category are required. The entrant must fill in both parts of the application form. (The first part about the entrant’s information such as company name, etc. will remain confidential and not be disclosed to the Judging Panel.) 5) An entrant shall submit two duplicate entries for each category (provision in case of product damage).

Entry Fees : 50US$ /EntryOne application is considered as one entry even the same productis submitted for more than one category

Payment Information• Cash/Cheque to be made payable to “the Federation of Thai Industries” • Money transferring to saving account of “the Federation of Thai Industries” Krungthai Bank, Queen Sirikit National Convention Center branch at account number 009-1-70874-5• SWIFT Code : KRTHTHBK• The Federation of Thai Industries was established under the F.T.I Act, 1987. As it is the private sector administrative juristic person to serve as the core organization and as the center for all Thai industries in the kingdom, FTI is not considered a “Company Limited”, or a “Limited Partnership” under Section 39 of the Revenue Code, so it is not subjected to deduction of 3% with holding tax

Remark : Please fax application form and pay-in slip to +66(0)2 229-4654 to get a receipt

Prizes :

Main AwardsSupreme Award: The judges will select from the winner of each ofthe main category.Gold Award: for the winner of each of the main category.Silver Award and Bronze Award: for the runner-up of each of themain category

Special AwardsGreen Award: for the winner who submit the products to competein green category.Innovation Award: for the winner who submit the products tocompete in innovation category.

ASEANPlastics Awards

2014

The 1st

ASEANPlastics Awards

2014

The 3rd

ASEANPlastics Awards

2014

The 2nd

(The following information is not accessible by the judging panel.)

Title of Entry …………………………………………………..….......................................................................................................................…......…………

Category entered ……………………………………………..…................................................................................…………....................................….……

Entered by (company/association name) ……………………………………………..…...........................................................................................………

Contact person ....................................................................................................................................................................................………...

Address ………………………………………………………………………………....................................................................................................……….............

Phone ……............….....................… Country ……...............….................… Email ………………………………………………….........................................

Client name ........................................................................................................………………………………………………….........................................

Product designed by ..........................................................................................………………………………………………….........................................

Manufactured by ……………………………………………………...........................................…………………………………………………......................................

Brand of machine and type of machine ………………………………….......................................………….........………………………………………………….......

Name of material manufacturer and type of materials ……………………………………………………………………………………..........................................

Signed ………………........…………………………………………………......................... Date……………………….......................................................................

Application Form (Part 2)

Number (for official use only) .......................................................

Number (for official use only) .......................................................

Application Form (Part 1)

Entered Category ...........................................................................................................................................................................................

Title of Entry ………...........…….............................................................…… Quantity Produced ………………………………....………….....…................

Production Process .................................................................................................................………………………………....………….....…................

If available, please provide the details of your product in each criteria.

Innovation & Function …………………………………………………………………………………………………………………………………………....………….....…...............

.........................………………………………....………….....…........................................................................................................................................

.........................………………………………....………….....…........................................................................................................................................

.........................………………………………....………….....…........................................................................................................................................

Aesthetics ..........................………………………………....………….....…......................................................................................................................

.........................………………………………....………….....…........................................................................................................................................

.........................………………………………....………….....…........................................................................................................................................

.........................………………………………....………….....…........................................................................................................................................

Environmental Concern .........................………………………………....………….....….................................................................................................

.........................………………………………....………….....…........................................................................................................................................

.........................………………………………....………….....…........................................................................................................................................

.........................………………………………....………….....…........................................................................................................................................

Overall Impression .........................………………………………....………….....….........................................................................................................

.........................………………………………....………….....…........................................................................................................................................

.........................………………………………....………….....…........................................................................................................................................

.........................………………………………....………….....…........................................................................................................................................

You can attach addition information about the products you have summitted to help the judges understand about your process and

reason to be the winners.

.........................………………………………....………….....…........................................................................................................................................

.........................………………………………....………….....…........................................................................................................................................

.........................………………………………....………….....…........................................................................................................................................

.........................………………………………....………….....…........................................................................................................................................

PLASTICS INSTITUTE OF THAILANDFoundation For Industrial Development Plastics Institute Of Thailand MIDI Building, 86/6 Soi Treemit, Rama IV Road, Klongtoey, Klongtoey, Bangkok 10110, ThailandTel: 662 391 5340-3 Fax: 662 712 3341 Email: unya.p@thaiplastics.org

THE INDONESIAN OLEFIN, AROMATIC AND PLASTIC INDUSTRY ASSOCIATION (INAPLAS)Grand Slipi Tower, Floor 21 suite A Jl. LetJen. S. Parman Kav. 22-24 Slipi Jakarta 12160. Indonesia.Tel: (6221)2902 2025 Fax: (6221) 2902 1944 E-mail: inaplas.jakarta@gmail.com

MALAYSIAN PLASTICS MANUFACTURERS ASSOCIATION (MPMA)37 Jalan 20/14, Paramount Garden, 46300 Petaling Jaya, Selangor, Darul Ehsan, Malaysia. Tel: (603)78763027 Fax: (603)78768352 E-mail: info@mpma.org.my

MYANMAR PLASTIC INDUSTRIES ASSOCIATION (MPIA)No. 29 Min Ye Kyaw Swar Street, UMFCCI Office Tower, 6th Floor Lanmadaw Township, Yangon, MyanmarTel/Fax: (951) 214835 E-mail: myanmarpia2000@gmail.com

PHILIPPINE PLASTICS INDUSTRY ASSN., INC. (PPIA)P.P.I.A. Building, 122A Del Mundo St. (W) Bet. 10th & 11th Ave Grace Park, Caloocan City, PhilippinesTel: (632)3611160/3304423/24 Fax: (632) 3611160 E-mail: secretariat.ppia@gmail.com

SINGAPORE PLASTIC INDUSTRY ASSOCIATION (SPIA) - AFPI PERMANENT SECRETARIAT15-B, Lorong 4 Geylang, Singapore 399272. Tel: (65)67435571 Fax: (65)67433309 E-mail: spia@spia.org.sg

VIETNAM PLASTICS ASSOCIATION (VPA)156 Nam Ky Khoi Nghia St., Ben Nghe Ward, District 1, Ho Chi Minh City, Vietnam Tel: (848) 3521 8552/53 Fax: (848) 3521 8554 E-mail: info@vpas.vn

Center for products submissionEntries submission closed 19 September 2014

Entrants can submit their entries to :

ASEAN Federation ofPlastic Industries (AFPI)

Presents

Creating new future forthe plastics industries in ASEAN

ASEAN

Plastics Awards

Background The ASEAN Federation of Plastic Industries (AFPI) wasfounded in 1981 by integrating the national Plastics IndustrialAssociations amongst ASEAN countries. The AFPI, now withseven members, seeks to promote intra-ASEAN economiccooperation and coordination in the field of plastic industry.Its other purpose is to develop and initiate preparation andimplementation of plans, programs and projects that willpromote and advance intra-ASEAN plastic industries and trade. During the 15th Term AFPI Council (2012-2014) meetingheld on April 3rd, 2013 in Thailand, AFPI realized that therewould be a huge impact from FTA in various frameworkswhich would influence Plastic market to become morecompetitive, especially in commodity products. Many manu-facturers have to reduce their costs for compatible priceswhile less consideration would be given to products’ quality.The integrated of ASEAN Economic Community (AEC) in 2015will inevitably be the target market for both importers andexporters as the market size would be increased to more than600 million people. The product contest is initiated as a partof the program to create distinguished awards for ASEANPlastic Industry under the name “THE 1st ASEAN PLASTICSAWARDS” so as to raise the standards, to develop andthe create more value added for ASEAN’s plastic products.The winners will receive a certificate and a medal as therecognition of the awards. The winners can use such recognitionfor marketing activities. The competition is hosted by Thailand with the collaborationof many organizations within member countries (of AFPI)namely THE INDONESIAN OLEFIN, AROMATIC AND PLASTICINDUSTRY ASSOCIATION (INAPLAS), MALAYSIAN PLASTICSMANUFACTURERS ASSOCIATION (MPMA), MYANMAR PLASTICINDUSTRIES ASSOCIATION (MPIA), PHILIPPINE PLASTICSINDUSTRY ASSN., INC. (PPIA), SINGAPORE PLASTIC INDUSTRYASSOCIATION (SPIA), VIETNAM PLASTICS ASSOCIATION (VPA),and PLASTIC INDUSTRY CLUB, THE FEDARATION OF THAIINDUSTRIES. The winners will be announced and awarded at the“Plastic Night 2014” Gala Dinner which will be held onWednesday 22nd October, 2014 at the Thai Army Club,Vibhavadi-Rangsit road, Bangkok, Thailand

Judging Criteria• The judges will be appointed by the AFPI committee and the decisions of the judges are final.• The judges reserve the right to move an entry from one category to another if they deem it more appropriate.• The judges reserve the right to select more than one winner in some categories or not to make an award in any category should the quantity of work not meets the standards set by the judging criteria. • All eligible entries are judged based on the merits of their quality of the production, manufacturing process, function, and design.• Entries will be judged according to the 4 criteria as follows: 1) Innovation & Function 2) Aesthetics 3) Environmental Concern 4) Overall Impression

Food Rigid Packaging: soft drink bottles, water bottles,

juice bottles, ready-to-eat food containers,instant noodle cups, etc.2

Non-food Rigid Packaging: oil containers, chemical bottles, detergent bottles, secondary packaging, etc.3

1Houseware Products: trays, bowls, plates, utensils, trash cans, tables, chairs, furniture and other plastic containers.

Objectives1. To raise the standard of the plastic manufacturing in ASEAN.2. To improve the quality and aesthetic of plastic products and encourage the value added creation of plastic products.3. To promote the innovation in plastic products.

Objectives

ASEAN

Plastics Awards

ASEAN

Plastics Awards

Electrical, Automotive andOther Durable Products/Parts.

Electrical, Automotive andOther Durable Products/Parts. 8

Flexible Packaging: stand up pouches, form-ffiill-seal sachets for coffee,

non-dairy creamer and ketchup, retorted pouches, etc.4Personal Care, Medical and Healthcare Products/Packaging/Devices: shampoo bottles, blister packs, pill containers, pharmaceutical bottles, cosmetic jars, cream tubes, syringes, saline bottles, sample collection tubes, toothbrushes, baby bottles, beverage bottles, liquid soap bottles, etc.5

Construction Products:pipe, ffiittings, construction equipments,

electrical conduits, construction parts, etc.

Construction Products:pipe, ffiittings, construction equipments,

electrical conduits, construction parts, etc.6Disposable Products: cutlery, chopsticks, straws, cups, tray boxes, plates, shopping bags, garbage bags, etc.

Disposable Products: cutlery, chopsticks, straws, cups, tray boxes, plates, shopping bags, garbage bags, etc.7

Main Product Categories

www.aseanplastic.com

Entries must be received by 19 September 2014

The competition is hosted by Thailand with the collaborationof many organizations within member countries (of AFPI)namely THE INDONESIAN OLEFIN, AROMATIC AND PLASTICINDUSTRY ASSOCIATION (INAPLAS), MALAYSIAN PLASTICSMANUFACTURERS ASSOCIATION (MPMA), MYANMAR PLASTICINDUSTRIES ASSOCIATION (MPIA), PHILIPPINE PLASTICSINDUSTRY ASSN., INC. (PPIA), SINGAPORE PLASTIC INDUSTRYASSOCIATION (SPIA), VIETNAM PLASTICS ASSOCIATION (VPA),and PLASTIC INDUSTRY CLUB, THE FEDARATION OF THAI

The winners will be announced and awarded at the“Plastic Night 2014” Gala Dinner which will be held on

2) Aesthetics 3) Environmental Concern 4) Overall Impression

1) Green or Sustainable Awards: a product that has been designed such that it has minimal negative impact on the global or local environment, community, society, or economy. The Green or Sustainable Award, has been especially established to honor companies, institutions and designers who have respect for the environment and who plan for a better future2) Innovation Awards: including innovation in product design, raw material and manufacturing process.

For any inquiries about THE 1st ASEAN PLASTICS AWARDS, please contact:PLASTIC INDUSTRY CLUB, THE FEDERATION OF THAI INDUSTRIES 4th Floor, Zone C, Queen Sirikit National Convention Center (QSNCC)60 New Rachadapisek Road, Klongtoey, Bangkok 10110, ThailandTel: +(66)2 345 1006 Fax: +(66)2 229 4654 Email: info@ftiplastic.com

Competition Terms & Conditions1) Entries shall be submitted by individuals, companies or associations involved in any area of plastic manufacturing process including • Plastic converters • Manufacturers of resins, compounds, masterbatch, and pigment • Manufacturers of machines and molds. • Product/brand owner • Designer • People involved with the plastic industry2) Entries (Products) must be manufactured in ASEAN and commercialized. 3) An applicant can enter as many products in as many different categories.4) An application form is for one entry per category. In case an entrant would like to contend the product in several categories, separate application forms and products for each category are required. The entrant must fill in both parts of the application form. (The first part about the entrant’s information such as company name, etc. will remain confidential and not be disclosed to the Judging Panel.) 5) An entrant shall submit two duplicate entries for each category (provision in case of product damage).

Entry Fees : 50US$ /EntryOne application is considered as one entry even the same productis submitted for more than one category

Payment Information• Cash/Cheque to be made payable to “the Federation of Thai Industries” • Money transferring to saving account of “the Federation of Thai Industries” Krungthai Bank, Queen Sirikit National Convention Center branch at account number 009-1-70874-5• SWIFT Code : KRTHTHBK• The Federation of Thai Industries was established under the F.T.I Act, 1987. As it is the private sector administrative juristic person to serve as the core organization and as the center for all Thai industries in the kingdom, FTI is not considered a “Company Limited”, or a “Limited Partnership” under Section 39 of the Revenue Code, so it is not subjected to deduction of 3% with holding tax

Remark : Please fax application form and pay-in slip to +66(0)2 229-4654 to get a receipt

Prizes :

Main AwardsSupreme Award: The judges will select from the winner of each ofthe main category.Gold Award: for the winner of each of the main category.Silver Award and Bronze Award: for the runner-up of each of themain category

Special AwardsGreen Award: for the winner who submit the products to competein green category.Innovation Award: for the winner who submit the products tocompete in innovation category.

ASEANPlastics Awards

2014

The 1st

ASEANPlastics Awards

2014

The 3rd

ASEANPlastics Awards

2014

The 2nd

(The following information is not accessible by the judging panel.)

Title of Entry …………………………………………………..….......................................................................................................................…......…………

Category entered ……………………………………………..…................................................................................…………....................................….……

Entered by (company/association name) ……………………………………………..…...........................................................................................………

Contact person ....................................................................................................................................................................................………...

Address ………………………………………………………………………………....................................................................................................……….............

Phone ……............….....................… Country ……...............….................… Email ………………………………………………….........................................

Client name ........................................................................................................………………………………………………….........................................

Product designed by ..........................................................................................………………………………………………….........................................

Manufactured by ……………………………………………………...........................................…………………………………………………......................................

Brand of machine and type of machine ………………………………….......................................………….........………………………………………………….......

Name of material manufacturer and type of materials ……………………………………………………………………………………..........................................

Signed ………………........…………………………………………………......................... Date……………………….......................................................................

Application Form (Part 2)

Number (for official use only) .......................................................

Number (for official use only) .......................................................

Application Form (Part 1)

Entered Category ...........................................................................................................................................................................................

Title of Entry ………...........…….............................................................…… Quantity Produced ………………………………....………….....…................

Production Process .................................................................................................................………………………………....………….....…................

If available, please provide the details of your product in each criteria.

Innovation & Function …………………………………………………………………………………………………………………………………………....………….....…...............

.........................………………………………....………….....…........................................................................................................................................

.........................………………………………....………….....…........................................................................................................................................

.........................………………………………....………….....…........................................................................................................................................

Aesthetics ..........................………………………………....………….....…......................................................................................................................

.........................………………………………....………….....…........................................................................................................................................

.........................………………………………....………….....…........................................................................................................................................

.........................………………………………....………….....…........................................................................................................................................

Environmental Concern .........................………………………………....………….....….................................................................................................

.........................………………………………....………….....…........................................................................................................................................

.........................………………………………....………….....…........................................................................................................................................

.........................………………………………....………….....…........................................................................................................................................

Overall Impression .........................………………………………....………….....….........................................................................................................

.........................………………………………....………….....…........................................................................................................................................

.........................………………………………....………….....…........................................................................................................................................

.........................………………………………....………….....…........................................................................................................................................

You can attach addition information about the products you have summitted to help the judges understand about your process and

reason to be the winners.

.........................………………………………....………….....…........................................................................................................................................

.........................………………………………....………….....…........................................................................................................................................

.........................………………………………....………….....…........................................................................................................................................

.........................………………………………....………….....…........................................................................................................................................

PLASTICS INSTITUTE OF THAILANDFoundation For Industrial Development Plastics Institute Of Thailand MIDI Building, 86/6 Soi Treemit, Rama IV Road, Klongtoey, Klongtoey, Bangkok 10110, ThailandTel: 662 391 5340-3 Fax: 662 712 3341 Email: unya.p@thaiplastics.org

THE INDONESIAN OLEFIN, AROMATIC AND PLASTIC INDUSTRY ASSOCIATION (INAPLAS)Grand Slipi Tower, Floor 21 suite A Jl. LetJen. S. Parman Kav. 22-24 Slipi Jakarta 12160. Indonesia.Tel: (6221)2902 2025 Fax: (6221) 2902 1944 E-mail: inaplas.jakarta@gmail.com

MALAYSIAN PLASTICS MANUFACTURERS ASSOCIATION (MPMA)37 Jalan 20/14, Paramount Garden, 46300 Petaling Jaya, Selangor, Darul Ehsan, Malaysia. Tel: (603)78763027 Fax: (603)78768352 E-mail: info@mpma.org.my

MYANMAR PLASTIC INDUSTRIES ASSOCIATION (MPIA)No. 29 Min Ye Kyaw Swar Street, UMFCCI Office Tower, 6th Floor Lanmadaw Township, Yangon, MyanmarTel/Fax: (951) 214835 E-mail: myanmarpia2000@gmail.com

PHILIPPINE PLASTICS INDUSTRY ASSN., INC. (PPIA)P.P.I.A. Building, 122A Del Mundo St. (W) Bet. 10th & 11th Ave Grace Park, Caloocan City, PhilippinesTel: (632)3611160/3304423/24 Fax: (632) 3611160 E-mail: secretariat.ppia@gmail.com

SINGAPORE PLASTIC INDUSTRY ASSOCIATION (SPIA) - AFPI PERMANENT SECRETARIAT15-B, Lorong 4 Geylang, Singapore 399272. Tel: (65)67435571 Fax: (65)67433309 E-mail: spia@spia.org.sg

VIETNAM PLASTICS ASSOCIATION (VPA)156 Nam Ky Khoi Nghia St., Ben Nghe Ward, District 1, Ho Chi Minh City, Vietnam Tel: (848) 3521 8552/53 Fax: (848) 3521 8554 E-mail: info@vpas.vn

Center for products submissionEntries submission closed 19 September 2014

Entrants can submit their entries to :

ASEAN Federation ofPlastic Industries (AFPI)

Presents

Creating new future forthe plastics industries in ASEAN

ASEAN

Plastics Awards

Background The ASEAN Federation of Plastic Industries (AFPI) wasfounded in 1981 by integrating the national Plastics IndustrialAssociations amongst ASEAN countries. The AFPI, now withseven members, seeks to promote intra-ASEAN economiccooperation and coordination in the field of plastic industry.Its other purpose is to develop and initiate preparation andimplementation of plans, programs and projects that willpromote and advance intra-ASEAN plastic industries and trade. During the 15th Term AFPI Council (2012-2014) meetingheld on April 3rd, 2013 in Thailand, AFPI realized that therewould be a huge impact from FTA in various frameworkswhich would influence Plastic market to become morecompetitive, especially in commodity products. Many manu-facturers have to reduce their costs for compatible priceswhile less consideration would be given to products’ quality.The integrated of ASEAN Economic Community (AEC) in 2015will inevitably be the target market for both importers andexporters as the market size would be increased to more than600 million people. The product contest is initiated as a partof the program to create distinguished awards for ASEANPlastic Industry under the name “THE 1st ASEAN PLASTICSAWARDS” so as to raise the standards, to develop andthe create more value added for ASEAN’s plastic products.The winners will receive a certificate and a medal as therecognition of the awards. The winners can use such recognitionfor marketing activities. The competition is hosted by Thailand with the collaborationof many organizations within member countries (of AFPI)namely THE INDONESIAN OLEFIN, AROMATIC AND PLASTICINDUSTRY ASSOCIATION (INAPLAS), MALAYSIAN PLASTICSMANUFACTURERS ASSOCIATION (MPMA), MYANMAR PLASTICINDUSTRIES ASSOCIATION (MPIA), PHILIPPINE PLASTICSINDUSTRY ASSN., INC. (PPIA), SINGAPORE PLASTIC INDUSTRYASSOCIATION (SPIA), VIETNAM PLASTICS ASSOCIATION (VPA),and PLASTIC INDUSTRY CLUB, THE FEDARATION OF THAIINDUSTRIES. The winners will be announced and awarded at the“Plastic Night 2014” Gala Dinner which will be held onWednesday 22nd October, 2014 at the Thai Army Club,Vibhavadi-Rangsit road, Bangkok, Thailand

Judging Criteria• The judges will be appointed by the AFPI committee and the decisions of the judges are final.• The judges reserve the right to move an entry from one category to another if they deem it more appropriate.• The judges reserve the right to select more than one winner in some categories or not to make an award in any category should the quantity of work not meets the standards set by the judging criteria. • All eligible entries are judged based on the merits of their quality of the production, manufacturing process, function, and design.• Entries will be judged according to the 4 criteria as follows: 1) Innovation & Function 2) Aesthetics 3) Environmental Concern 4) Overall Impression

Food Rigid Packaging: soft drink bottles, water bottles,

juice bottles, ready-to-eat food containers,instant noodle cups, etc.2

Non-food Rigid Packaging: oil containers, chemical bottles, detergent bottles, secondary packaging, etc.3

1Houseware Products: trays, bowls, plates, utensils, trash cans, tables, chairs, furniture and other plastic containers.

Objectives1. To raise the standard of the plastic manufacturing in ASEAN.2. To improve the quality and aesthetic of plastic products and encourage the value added creation of plastic products.3. To promote the innovation in plastic products.

Objectives

ASEAN

Plastics Awards

ASEAN

Plastics Awards

Electrical, Automotive andOther Durable Products/Parts.

Electrical, Automotive andOther Durable Products/Parts. 8

Flexible Packaging: stand up pouches, form-ffiill-seal sachets for coffee,

non-dairy creamer and ketchup, retorted pouches, etc.4Personal Care, Medical and Healthcare Products/Packaging/Devices: shampoo bottles, blister packs, pill containers, pharmaceutical bottles, cosmetic jars, cream tubes, syringes, saline bottles, sample collection tubes, toothbrushes, baby bottles, beverage bottles, liquid soap bottles, etc.5

Construction Products:pipe, ffiittings, construction equipments,

electrical conduits, construction parts, etc.

Construction Products:pipe, ffiittings, construction equipments,

electrical conduits, construction parts, etc.6Disposable Products: cutlery, chopsticks, straws, cups, tray boxes, plates, shopping bags, garbage bags, etc.

Disposable Products: cutlery, chopsticks, straws, cups, tray boxes, plates, shopping bags, garbage bags, etc.7

Main Product Categories

www.aseanplastic.com

Entries must be received by 19 September 2014

The competition is hosted by Thailand with the collaborationof many organizations within member countries (of AFPI)namely THE INDONESIAN OLEFIN, AROMATIC AND PLASTICINDUSTRY ASSOCIATION (INAPLAS), MALAYSIAN PLASTICSMANUFACTURERS ASSOCIATION (MPMA), MYANMAR PLASTICINDUSTRIES ASSOCIATION (MPIA), PHILIPPINE PLASTICSINDUSTRY ASSN., INC. (PPIA), SINGAPORE PLASTIC INDUSTRYASSOCIATION (SPIA), VIETNAM PLASTICS ASSOCIATION (VPA),and PLASTIC INDUSTRY CLUB, THE FEDARATION OF THAI

The winners will be announced and awarded at the“Plastic Night 2014” Gala Dinner which will be held on

2) Aesthetics 3) Environmental Concern 4) Overall Impression

1) Green or Sustainable Awards: a product that has been designed such that it has minimal negative impact on the global or local environment, community, society, or economy. The Green or Sustainable Award, has been especially established to honor companies, institutions and designers who have respect for the environment and who plan for a better future2) Innovation Awards: including innovation in product design, raw material and manufacturing process.

For any inquiries about THE 1st ASEAN PLASTICS AWARDS, please contact:PLASTIC INDUSTRY CLUB, THE FEDERATION OF THAI INDUSTRIES 4th Floor, Zone C, Queen Sirikit National Convention Center (QSNCC)60 New Rachadapisek Road, Klongtoey, Bangkok 10110, ThailandTel: +(66)2 345 1006 Fax: +(66)2 229 4654 Email: info@ftiplastic.com

Competition Terms & Conditions1) Entries shall be submitted by individuals, companies or associations involved in any area of plastic manufacturing process including • Plastic converters • Manufacturers of resins, compounds, masterbatch, and pigment • Manufacturers of machines and molds. • Product/brand owner • Designer • People involved with the plastic industry2) Entries (Products) must be manufactured in ASEAN and commercialized. 3) An applicant can enter as many products in as many different categories.4) An application form is for one entry per category. In case an entrant would like to contend the product in several categories, separate application forms and products for each category are required. The entrant must fill in both parts of the application form. (The first part about the entrant’s information such as company name, etc. will remain confidential and not be disclosed to the Judging Panel.) 5) An entrant shall submit two duplicate entries for each category (provision in case of product damage).

Entry Fees : 50US$ /EntryOne application is considered as one entry even the same productis submitted for more than one category

Payment Information• Cash/Cheque to be made payable to “the Federation of Thai Industries” • Money transferring to saving account of “the Federation of Thai Industries” Krungthai Bank, Queen Sirikit National Convention Center branch at account number 009-1-70874-5• SWIFT Code : KRTHTHBK• The Federation of Thai Industries was established under the F.T.I Act, 1987. As it is the private sector administrative juristic person to serve as the core organization and as the center for all Thai industries in the kingdom, FTI is not considered a “Company Limited”, or a “Limited Partnership” under Section 39 of the Revenue Code, so it is not subjected to deduction of 3% with holding tax

Remark : Please fax application form and pay-in slip to +66(0)2 229-4654 to get a receipt

Prizes :

Main AwardsSupreme Award: The judges will select from the winner of each ofthe main category.Gold Award: for the winner of each of the main category.Silver Award and Bronze Award: for the runner-up of each of themain category

Special AwardsGreen Award: for the winner who submit the products to competein green category.Innovation Award: for the winner who submit the products tocompete in innovation category.

ASEANPlastics Awards

2014

The 1st

ASEANPlastics Awards

2014

The 3rd

ASEANPlastics Awards

2014

The 2nd

(The following information is not accessible by the judging panel.)

Title of Entry …………………………………………………..….......................................................................................................................…......…………

Category entered ……………………………………………..…................................................................................…………....................................….……

Entered by (company/association name) ……………………………………………..…...........................................................................................………

Contact person ....................................................................................................................................................................................………...

Address ………………………………………………………………………………....................................................................................................……….............

Phone ……............….....................… Country ……...............….................… Email ………………………………………………….........................................

Client name ........................................................................................................………………………………………………….........................................

Product designed by ..........................................................................................………………………………………………….........................................

Manufactured by ……………………………………………………...........................................…………………………………………………......................................

Brand of machine and type of machine ………………………………….......................................………….........………………………………………………….......

Name of material manufacturer and type of materials ……………………………………………………………………………………..........................................

Signed ………………........…………………………………………………......................... Date……………………….......................................................................

Application Form (Part 2)

Number (for official use only) .......................................................

Number (for official use only) .......................................................

Application Form (Part 1)

Entered Category ...........................................................................................................................................................................................

Title of Entry ………...........…….............................................................…… Quantity Produced ………………………………....………….....…................

Production Process .................................................................................................................………………………………....………….....…................

If available, please provide the details of your product in each criteria.

Innovation & Function …………………………………………………………………………………………………………………………………………....………….....…...............

.........................………………………………....………….....…........................................................................................................................................

.........................………………………………....………….....…........................................................................................................................................

.........................………………………………....………….....…........................................................................................................................................

Aesthetics ..........................………………………………....………….....…......................................................................................................................

.........................………………………………....………….....…........................................................................................................................................

.........................………………………………....………….....…........................................................................................................................................

.........................………………………………....………….....…........................................................................................................................................

Environmental Concern .........................………………………………....………….....….................................................................................................

.........................………………………………....………….....…........................................................................................................................................

.........................………………………………....………….....…........................................................................................................................................

.........................………………………………....………….....…........................................................................................................................................

Overall Impression .........................………………………………....………….....….........................................................................................................

.........................………………………………....………….....…........................................................................................................................................

.........................………………………………....………….....…........................................................................................................................................

.........................………………………………....………….....…........................................................................................................................................

You can attach addition information about the products you have summitted to help the judges understand about your process and

reason to be the winners.

.........................………………………………....………….....…........................................................................................................................................

.........................………………………………....………….....…........................................................................................................................................

.........................………………………………....………….....…........................................................................................................................................

.........................………………………………....………….....…........................................................................................................................................

PLASTICS INSTITUTE OF THAILANDFoundation For Industrial Development Plastics Institute Of Thailand MIDI Building, 86/6 Soi Treemit, Rama IV Road, Klongtoey, Klongtoey, Bangkok 10110, ThailandTel: 662 391 5340-3 Fax: 662 712 3341 Email: unya.p@thaiplastics.org

THE INDONESIAN OLEFIN, AROMATIC AND PLASTIC INDUSTRY ASSOCIATION (INAPLAS)Grand Slipi Tower, Floor 21 suite A Jl. LetJen. S. Parman Kav. 22-24 Slipi Jakarta 12160. Indonesia.Tel: (6221)2902 2025 Fax: (6221) 2902 1944 E-mail: inaplas.jakarta@gmail.com

MALAYSIAN PLASTICS MANUFACTURERS ASSOCIATION (MPMA)37 Jalan 20/14, Paramount Garden, 46300 Petaling Jaya, Selangor, Darul Ehsan, Malaysia. Tel: (603)78763027 Fax: (603)78768352 E-mail: info@mpma.org.my

MYANMAR PLASTIC INDUSTRIES ASSOCIATION (MPIA)No. 29 Min Ye Kyaw Swar Street, UMFCCI Office Tower, 6th Floor Lanmadaw Township, Yangon, MyanmarTel/Fax: (951) 214835 E-mail: myanmarpia2000@gmail.com

PHILIPPINE PLASTICS INDUSTRY ASSN., INC. (PPIA)P.P.I.A. Building, 122A Del Mundo St. (W) Bet. 10th & 11th Ave Grace Park, Caloocan City, PhilippinesTel: (632)3611160/3304423/24 Fax: (632) 3611160 E-mail: secretariat.ppia@gmail.com

SINGAPORE PLASTIC INDUSTRY ASSOCIATION (SPIA) - AFPI PERMANENT SECRETARIAT15-B, Lorong 4 Geylang, Singapore 399272. Tel: (65)67435571 Fax: (65)67433309 E-mail: spia@spia.org.sg

VIETNAM PLASTICS ASSOCIATION (VPA)156 Nam Ky Khoi Nghia St., Ben Nghe Ward, District 1, Ho Chi Minh City, Vietnam Tel: (848) 3521 8552/53 Fax: (848) 3521 8554 E-mail: info@vpas.vn

Center for products submissionEntries submission closed 19 September 2014

Entrants can submit their entries to :

ASEAN Federation ofPlastic Industries (AFPI)

Presents

Creating new future forthe plastics industries in ASEAN

ASEAN

Plastics Awards

Background The ASEAN Federation of Plastic Industries (AFPI) wasfounded in 1981 by integrating the national Plastics IndustrialAssociations amongst ASEAN countries. The AFPI, now withseven members, seeks to promote intra-ASEAN economiccooperation and coordination in the field of plastic industry.Its other purpose is to develop and initiate preparation andimplementation of plans, programs and projects that willpromote and advance intra-ASEAN plastic industries and trade. During the 15th Term AFPI Council (2012-2014) meetingheld on April 3rd, 2013 in Thailand, AFPI realized that therewould be a huge impact from FTA in various frameworkswhich would influence Plastic market to become morecompetitive, especially in commodity products. Many manu-facturers have to reduce their costs for compatible priceswhile less consideration would be given to products’ quality.The integrated of ASEAN Economic Community (AEC) in 2015will inevitably be the target market for both importers andexporters as the market size would be increased to more than600 million people. The product contest is initiated as a partof the program to create distinguished awards for ASEANPlastic Industry under the name “THE 1st ASEAN PLASTICSAWARDS” so as to raise the standards, to develop andthe create more value added for ASEAN’s plastic products.The winners will receive a certificate and a medal as therecognition of the awards. The winners can use such recognitionfor marketing activities. The competition is hosted by Thailand with the collaborationof many organizations within member countries (of AFPI)namely THE INDONESIAN OLEFIN, AROMATIC AND PLASTICINDUSTRY ASSOCIATION (INAPLAS), MALAYSIAN PLASTICSMANUFACTURERS ASSOCIATION (MPMA), MYANMAR PLASTICINDUSTRIES ASSOCIATION (MPIA), PHILIPPINE PLASTICSINDUSTRY ASSN., INC. (PPIA), SINGAPORE PLASTIC INDUSTRYASSOCIATION (SPIA), VIETNAM PLASTICS ASSOCIATION (VPA),and PLASTIC INDUSTRY CLUB, THE FEDARATION OF THAIINDUSTRIES. The winners will be announced and awarded at the“Plastic Night 2014” Gala Dinner which will be held onWednesday 22nd October, 2014 at the Thai Army Club,Vibhavadi-Rangsit road, Bangkok, Thailand

Judging Criteria• The judges will be appointed by the AFPI committee and the decisions of the judges are final.• The judges reserve the right to move an entry from one category to another if they deem it more appropriate.• The judges reserve the right to select more than one winner in some categories or not to make an award in any category should the quantity of work not meets the standards set by the judging criteria. • All eligible entries are judged based on the merits of their quality of the production, manufacturing process, function, and design.• Entries will be judged according to the 4 criteria as follows: 1) Innovation & Function 2) Aesthetics 3) Environmental Concern 4) Overall Impression

Food Rigid Packaging: soft drink bottles, water bottles,

juice bottles, ready-to-eat food containers,instant noodle cups, etc.2

Non-food Rigid Packaging: oil containers, chemical bottles, detergent bottles, secondary packaging, etc.3

1Houseware Products: trays, bowls, plates, utensils, trash cans, tables, chairs, furniture and other plastic containers.

Objectives1. To raise the standard of the plastic manufacturing in ASEAN.2. To improve the quality and aesthetic of plastic products and encourage the value added creation of plastic products.3. To promote the innovation in plastic products.

Objectives

ASEAN

Plastics Awards

ASEAN

Plastics Awards

Electrical, Automotive andOther Durable Products/Parts.

Electrical, Automotive andOther Durable Products/Parts. 8

Flexible Packaging: stand up pouches, form-ffiill-seal sachets for coffee,

non-dairy creamer and ketchup, retorted pouches, etc.4Personal Care, Medical and Healthcare Products/Packaging/Devices: shampoo bottles, blister packs, pill containers, pharmaceutical bottles, cosmetic jars, cream tubes, syringes, saline bottles, sample collection tubes, toothbrushes, baby bottles, beverage bottles, liquid soap bottles, etc.5

Construction Products:pipe, ffiittings, construction equipments,

electrical conduits, construction parts, etc.

Construction Products:pipe, ffiittings, construction equipments,

electrical conduits, construction parts, etc.6Disposable Products: cutlery, chopsticks, straws, cups, tray boxes, plates, shopping bags, garbage bags, etc.

Disposable Products: cutlery, chopsticks, straws, cups, tray boxes, plates, shopping bags, garbage bags, etc.7

Main Product Categories

www.aseanplastic.com

Entries must be received by 19 September 2014

The competition is hosted by Thailand with the collaborationof many organizations within member countries (of AFPI)namely THE INDONESIAN OLEFIN, AROMATIC AND PLASTICINDUSTRY ASSOCIATION (INAPLAS), MALAYSIAN PLASTICSMANUFACTURERS ASSOCIATION (MPMA), MYANMAR PLASTICINDUSTRIES ASSOCIATION (MPIA), PHILIPPINE PLASTICSINDUSTRY ASSN., INC. (PPIA), SINGAPORE PLASTIC INDUSTRYASSOCIATION (SPIA), VIETNAM PLASTICS ASSOCIATION (VPA),and PLASTIC INDUSTRY CLUB, THE FEDARATION OF THAI

The winners will be announced and awarded at the“Plastic Night 2014” Gala Dinner which will be held on

2) Aesthetics 3) Environmental Concern 4) Overall Impression

1) Green or Sustainable Awards: a product that has been designed such that it has minimal negative impact on the global or local environment, community, society, or economy. The Green or Sustainable Award, has been especially established to honor companies, institutions and designers who have respect for the environment and who plan for a better future2) Innovation Awards: including innovation in product design, raw material and manufacturing process.

For any inquiries about THE 1st ASEAN PLASTICS AWARDS, please contact:PLASTIC INDUSTRY CLUB, THE FEDERATION OF THAI INDUSTRIES 4th Floor, Zone C, Queen Sirikit National Convention Center (QSNCC)60 New Rachadapisek Road, Klongtoey, Bangkok 10110, ThailandTel: +(66)2 345 1006 Fax: +(66)2 229 4654 Email: info@ftiplastic.com

Competition Terms & Conditions1) Entries shall be submitted by individuals, companies or associations involved in any area of plastic manufacturing process including • Plastic converters • Manufacturers of resins, compounds, masterbatch, and pigment • Manufacturers of machines and molds. • Product/brand owner • Designer • People involved with the plastic industry2) Entries (Products) must be manufactured in ASEAN and commercialized. 3) An applicant can enter as many products in as many different categories.4) An application form is for one entry per category. In case an entrant would like to contend the product in several categories, separate application forms and products for each category are required. The entrant must fill in both parts of the application form. (The first part about the entrant’s information such as company name, etc. will remain confidential and not be disclosed to the Judging Panel.) 5) An entrant shall submit two duplicate entries for each category (provision in case of product damage).

Entry Fees : 50US$ /EntryOne application is considered as one entry even the same productis submitted for more than one category

Payment Information• Cash/Cheque to be made payable to “the Federation of Thai Industries” • Money transferring to saving account of “the Federation of Thai Industries” Krungthai Bank, Queen Sirikit National Convention Center branch at account number 009-1-70874-5• SWIFT Code : KRTHTHBK• The Federation of Thai Industries was established under the F.T.I Act, 1987. As it is the private sector administrative juristic person to serve as the core organization and as the center for all Thai industries in the kingdom, FTI is not considered a “Company Limited”, or a “Limited Partnership” under Section 39 of the Revenue Code, so it is not subjected to deduction of 3% with holding tax

Remark : Please fax application form and pay-in slip to +66(0)2 229-4654 to get a receipt

Prizes :

Main AwardsSupreme Award: The judges will select from the winner of each ofthe main category.Gold Award: for the winner of each of the main category.Silver Award and Bronze Award: for the runner-up of each of themain category

Special AwardsGreen Award: for the winner who submit the products to competein green category.Innovation Award: for the winner who submit the products tocompete in innovation category.

ASEANPlastics Awards

2014

The 1st

ASEANPlastics Awards

2014

The 3rd

ASEANPlastics Awards

2014

The 2nd

(The following information is not accessible by the judging panel.)

Title of Entry …………………………………………………..….......................................................................................................................…......…………

Category entered ……………………………………………..…................................................................................…………....................................….……

Entered by (company/association name) ……………………………………………..…...........................................................................................………

Contact person ....................................................................................................................................................................................………...

Address ………………………………………………………………………………....................................................................................................……….............

Phone ……............….....................… Country ……...............….................… Email ………………………………………………….........................................

Client name ........................................................................................................………………………………………………….........................................

Product designed by ..........................................................................................………………………………………………….........................................

Manufactured by ……………………………………………………...........................................…………………………………………………......................................

Brand of machine and type of machine ………………………………….......................................………….........………………………………………………….......

Name of material manufacturer and type of materials ……………………………………………………………………………………..........................................

Signed ………………........…………………………………………………......................... Date……………………….......................................................................

Application Form (Part 2)

Number (for official use only) .......................................................

Number (for official use only) .......................................................

Application Form (Part 1)

Entered Category ...........................................................................................................................................................................................

Title of Entry ………...........…….............................................................…… Quantity Produced ………………………………....………….....…................

Production Process .................................................................................................................………………………………....………….....…................

If available, please provide the details of your product in each criteria.

Innovation & Function …………………………………………………………………………………………………………………………………………....………….....…...............

.........................………………………………....………….....…........................................................................................................................................

.........................………………………………....………….....…........................................................................................................................................

.........................………………………………....………….....…........................................................................................................................................

Aesthetics ..........................………………………………....………….....…......................................................................................................................

.........................………………………………....………….....…........................................................................................................................................

.........................………………………………....………….....…........................................................................................................................................

.........................………………………………....………….....…........................................................................................................................................

Environmental Concern .........................………………………………....………….....….................................................................................................

.........................………………………………....………….....…........................................................................................................................................

.........................………………………………....………….....…........................................................................................................................................

.........................………………………………....………….....…........................................................................................................................................

Overall Impression .........................………………………………....………….....….........................................................................................................

.........................………………………………....………….....…........................................................................................................................................

.........................………………………………....………….....…........................................................................................................................................

.........................………………………………....………….....…........................................................................................................................................

You can attach addition information about the products you have summitted to help the judges understand about your process and

reason to be the winners.

.........................………………………………....………….....…........................................................................................................................................

.........................………………………………....………….....…........................................................................................................................................

.........................………………………………....………….....…........................................................................................................................................

.........................………………………………....………….....…........................................................................................................................................

PLASTICS INSTITUTE OF THAILANDFoundation For Industrial Development Plastics Institute Of Thailand MIDI Building, 86/6 Soi Treemit, Rama IV Road, Klongtoey, Klongtoey, Bangkok 10110, ThailandTel: 662 391 5340-3 Fax: 662 712 3341 Email: unya.p@thaiplastics.org

THE INDONESIAN OLEFIN, AROMATIC AND PLASTIC INDUSTRY ASSOCIATION (INAPLAS)Grand Slipi Tower, Floor 21 suite A Jl. LetJen. S. Parman Kav. 22-24 Slipi Jakarta 12160. Indonesia.Tel: (6221)2902 2025 Fax: (6221) 2902 1944 E-mail: inaplas.jakarta@gmail.com

MALAYSIAN PLASTICS MANUFACTURERS ASSOCIATION (MPMA)37 Jalan 20/14, Paramount Garden, 46300 Petaling Jaya, Selangor, Darul Ehsan, Malaysia. Tel: (603)78763027 Fax: (603)78768352 E-mail: info@mpma.org.my

MYANMAR PLASTIC INDUSTRIES ASSOCIATION (MPIA)No. 29 Min Ye Kyaw Swar Street, UMFCCI Office Tower, 6th Floor Lanmadaw Township, Yangon, MyanmarTel/Fax: (951) 214835 E-mail: myanmarpia2000@gmail.com

PHILIPPINE PLASTICS INDUSTRY ASSN., INC. (PPIA)P.P.I.A. Building, 122A Del Mundo St. (W) Bet. 10th & 11th Ave Grace Park, Caloocan City, PhilippinesTel: (632)3611160/3304423/24 Fax: (632) 3611160 E-mail: secretariat.ppia@gmail.com

SINGAPORE PLASTIC INDUSTRY ASSOCIATION (SPIA) - AFPI PERMANENT SECRETARIAT15-B, Lorong 4 Geylang, Singapore 399272. Tel: (65)67435571 Fax: (65)67433309 E-mail: spia@spia.org.sg

VIETNAM PLASTICS ASSOCIATION (VPA)156 Nam Ky Khoi Nghia St., Ben Nghe Ward, District 1, Ho Chi Minh City, Vietnam Tel: (848) 3521 8552/53 Fax: (848) 3521 8554 E-mail: info@vpas.vn

Center for products submissionEntries submission closed 19 September 2014

Entrants can submit their entries to :

ASEAN Federation ofPlastic Industries (AFPI)

Presents

Creating new future forthe plastics industries in ASEAN

ASEAN

Plastics Awards

Background The ASEAN Federation of Plastic Industries (AFPI) wasfounded in 1981 by integrating the national Plastics IndustrialAssociations amongst ASEAN countries. The AFPI, now withseven members, seeks to promote intra-ASEAN economiccooperation and coordination in the field of plastic industry.Its other purpose is to develop and initiate preparation andimplementation of plans, programs and projects that willpromote and advance intra-ASEAN plastic industries and trade. During the 15th Term AFPI Council (2012-2014) meetingheld on April 3rd, 2013 in Thailand, AFPI realized that therewould be a huge impact from FTA in various frameworkswhich would influence Plastic market to become morecompetitive, especially in commodity products. Many manu-facturers have to reduce their costs for compatible priceswhile less consideration would be given to products’ quality.The integrated of ASEAN Economic Community (AEC) in 2015will inevitably be the target market for both importers andexporters as the market size would be increased to more than600 million people. The product contest is initiated as a partof the program to create distinguished awards for ASEANPlastic Industry under the name “THE 1st ASEAN PLASTICSAWARDS” so as to raise the standards, to develop andthe create more value added for ASEAN’s plastic products.The winners will receive a certificate and a medal as therecognition of the awards. The winners can use such recognitionfor marketing activities. The competition is hosted by Thailand with the collaborationof many organizations within member countries (of AFPI)namely THE INDONESIAN OLEFIN, AROMATIC AND PLASTICINDUSTRY ASSOCIATION (INAPLAS), MALAYSIAN PLASTICSMANUFACTURERS ASSOCIATION (MPMA), MYANMAR PLASTICINDUSTRIES ASSOCIATION (MPIA), PHILIPPINE PLASTICSINDUSTRY ASSN., INC. (PPIA), SINGAPORE PLASTIC INDUSTRYASSOCIATION (SPIA), VIETNAM PLASTICS ASSOCIATION (VPA),and PLASTIC INDUSTRY CLUB, THE FEDARATION OF THAIINDUSTRIES. The winners will be announced and awarded at the“Plastic Night 2014” Gala Dinner which will be held onWednesday 22nd October, 2014 at the Thai Army Club,Vibhavadi-Rangsit road, Bangkok, Thailand

Judging Criteria• The judges will be appointed by the AFPI committee and the decisions of the judges are final.• The judges reserve the right to move an entry from one category to another if they deem it more appropriate.• The judges reserve the right to select more than one winner in some categories or not to make an award in any category should the quantity of work not meets the standards set by the judging criteria. • All eligible entries are judged based on the merits of their quality of the production, manufacturing process, function, and design.• Entries will be judged according to the 4 criteria as follows: 1) Innovation & Function 2) Aesthetics 3) Environmental Concern 4) Overall Impression

Food Rigid Packaging: soft drink bottles, water bottles,

juice bottles, ready-to-eat food containers,instant noodle cups, etc.2

Non-food Rigid Packaging: oil containers, chemical bottles, detergent bottles, secondary packaging, etc.3

1Houseware Products: trays, bowls, plates, utensils, trash cans, tables, chairs, furniture and other plastic containers.

Objectives1. To raise the standard of the plastic manufacturing in ASEAN.2. To improve the quality and aesthetic of plastic products and encourage the value added creation of plastic products.3. To promote the innovation in plastic products.

Objectives

ASEAN

Plastics Awards

ASEAN

Plastics Awards

Electrical, Automotive andOther Durable Products/Parts.

Electrical, Automotive andOther Durable Products/Parts. 8

Flexible Packaging: stand up pouches, form-ffiill-seal sachets for coffee,

non-dairy creamer and ketchup, retorted pouches, etc.4Personal Care, Medical and Healthcare Products/Packaging/Devices: shampoo bottles, blister packs, pill containers, pharmaceutical bottles, cosmetic jars, cream tubes, syringes, saline bottles, sample collection tubes, toothbrushes, baby bottles, beverage bottles, liquid soap bottles, etc.5

Construction Products:pipe, ffiittings, construction equipments,

electrical conduits, construction parts, etc.

Construction Products:pipe, ffiittings, construction equipments,

electrical conduits, construction parts, etc.6Disposable Products: cutlery, chopsticks, straws, cups, tray boxes, plates, shopping bags, garbage bags, etc.

Disposable Products: cutlery, chopsticks, straws, cups, tray boxes, plates, shopping bags, garbage bags, etc.7

Main Product Categories

www.aseanplastic.com

Entries must be received by 19 September 2014

The competition is hosted by Thailand with the collaborationof many organizations within member countries (of AFPI)namely THE INDONESIAN OLEFIN, AROMATIC AND PLASTICINDUSTRY ASSOCIATION (INAPLAS), MALAYSIAN PLASTICSMANUFACTURERS ASSOCIATION (MPMA), MYANMAR PLASTICINDUSTRIES ASSOCIATION (MPIA), PHILIPPINE PLASTICSINDUSTRY ASSN., INC. (PPIA), SINGAPORE PLASTIC INDUSTRYASSOCIATION (SPIA), VIETNAM PLASTICS ASSOCIATION (VPA),and PLASTIC INDUSTRY CLUB, THE FEDARATION OF THAI

The winners will be announced and awarded at the“Plastic Night 2014” Gala Dinner which will be held on

2) Aesthetics 3) Environmental Concern 4) Overall Impression

1) Green or Sustainable Awards: a product that has been designed such that it has minimal negative impact on the global or local environment, community, society, or economy. The Green or Sustainable Award, has been especially established to honor companies, institutions and designers who have respect for the environment and who plan for a better future2) Innovation Awards: including innovation in product design, raw material and manufacturing process.

For any inquiries about THE 1st ASEAN PLASTICS AWARDS, please contact:PLASTIC INDUSTRY CLUB, THE FEDERATION OF THAI INDUSTRIES 4th Floor, Zone C, Queen Sirikit National Convention Center (QSNCC)60 New Rachadapisek Road, Klongtoey, Bangkok 10110, ThailandTel: +(66)2 345 1006 Fax: +(66)2 229 4654 Email: info@ftiplastic.com

Competition Terms & Conditions1) Entries shall be submitted by individuals, companies or associations involved in any area of plastic manufacturing process including • Plastic converters • Manufacturers of resins, compounds, masterbatch, and pigment • Manufacturers of machines and molds. • Product/brand owner • Designer • People involved with the plastic industry2) Entries (Products) must be manufactured in ASEAN and commercialized. 3) An applicant can enter as many products in as many different categories.4) An application form is for one entry per category. In case an entrant would like to contend the product in several categories, separate application forms and products for each category are required. The entrant must fill in both parts of the application form. (The first part about the entrant’s information such as company name, etc. will remain confidential and not be disclosed to the Judging Panel.) 5) An entrant shall submit two duplicate entries for each category (provision in case of product damage).

Entry Fees : 50US$ /EntryOne application is considered as one entry even the same productis submitted for more than one category

Payment Information• Cash/Cheque to be made payable to “the Federation of Thai Industries” • Money transferring to saving account of “the Federation of Thai Industries” Krungthai Bank, Queen Sirikit National Convention Center branch at account number 009-1-70874-5• SWIFT Code : KRTHTHBK• The Federation of Thai Industries was established under the F.T.I Act, 1987. As it is the private sector administrative juristic person to serve as the core organization and as the center for all Thai industries in the kingdom, FTI is not considered a “Company Limited”, or a “Limited Partnership” under Section 39 of the Revenue Code, so it is not subjected to deduction of 3% with holding tax

Remark : Please fax application form and pay-in slip to +66(0)2 229-4654 to get a receipt

Prizes :

Main AwardsSupreme Award: The judges will select from the winner of each ofthe main category.Gold Award: for the winner of each of the main category.Silver Award and Bronze Award: for the runner-up of each of themain category

Special AwardsGreen Award: for the winner who submit the products to competein green category.Innovation Award: for the winner who submit the products tocompete in innovation category.

ASEANPlastics Awards

2014

The 1st

ASEANPlastics Awards

2014

The 3rd

ASEANPlastics Awards

2014

The 2nd

(The following information is not accessible by the judging panel.)

Title of Entry …………………………………………………..….......................................................................................................................…......…………

Category entered ……………………………………………..…................................................................................…………....................................….……

Entered by (company/association name) ……………………………………………..…...........................................................................................………

Contact person ....................................................................................................................................................................................………...

Address ………………………………………………………………………………....................................................................................................……….............

Phone ……............….....................… Country ……...............….................… Email ………………………………………………….........................................

Client name ........................................................................................................………………………………………………….........................................

Product designed by ..........................................................................................………………………………………………….........................................

Manufactured by ……………………………………………………...........................................…………………………………………………......................................

Brand of machine and type of machine ………………………………….......................................………….........………………………………………………….......

Name of material manufacturer and type of materials ……………………………………………………………………………………..........................................

Signed ………………........…………………………………………………......................... Date……………………….......................................................................

Application Form (Part 2)

Number (for official use only) .......................................................

Number (for official use only) .......................................................

Application Form (Part 1)

Entered Category ...........................................................................................................................................................................................

Title of Entry ………...........…….............................................................…… Quantity Produced ………………………………....………….....…................

Production Process .................................................................................................................………………………………....………….....…................

If available, please provide the details of your product in each criteria.

Innovation & Function …………………………………………………………………………………………………………………………………………....………….....…...............

.........................………………………………....………….....…........................................................................................................................................

.........................………………………………....………….....…........................................................................................................................................

.........................………………………………....………….....…........................................................................................................................................

Aesthetics ..........................………………………………....………….....…......................................................................................................................

.........................………………………………....………….....…........................................................................................................................................

.........................………………………………....………….....…........................................................................................................................................

.........................………………………………....………….....…........................................................................................................................................

Environmental Concern .........................………………………………....………….....….................................................................................................

.........................………………………………....………….....…........................................................................................................................................

.........................………………………………....………….....…........................................................................................................................................

.........................………………………………....………….....…........................................................................................................................................

Overall Impression .........................………………………………....………….....….........................................................................................................

.........................………………………………....………….....…........................................................................................................................................

.........................………………………………....………….....…........................................................................................................................................

.........................………………………………....………….....…........................................................................................................................................

You can attach addition information about the products you have summitted to help the judges understand about your process and

reason to be the winners.

.........................………………………………....………….....…........................................................................................................................................

.........................………………………………....………….....…........................................................................................................................................

.........................………………………………....………….....…........................................................................................................................................

.........................………………………………....………….....…........................................................................................................................................

PLASTICS INSTITUTE OF THAILANDFoundation For Industrial Development Plastics Institute Of Thailand MIDI Building, 86/6 Soi Treemit, Rama IV Road, Klongtoey, Klongtoey, Bangkok 10110, ThailandTel: 662 391 5340-3 Fax: 662 712 3341 Email: unya.p@thaiplastics.org

THE INDONESIAN OLEFIN, AROMATIC AND PLASTIC INDUSTRY ASSOCIATION (INAPLAS)Grand Slipi Tower, Floor 21 suite A Jl. LetJen. S. Parman Kav. 22-24 Slipi Jakarta 12160. Indonesia.Tel: (6221)2902 2025 Fax: (6221) 2902 1944 E-mail: inaplas.jakarta@gmail.com

MALAYSIAN PLASTICS MANUFACTURERS ASSOCIATION (MPMA)37 Jalan 20/14, Paramount Garden, 46300 Petaling Jaya, Selangor, Darul Ehsan, Malaysia. Tel: (603)78763027 Fax: (603)78768352 E-mail: info@mpma.org.my

MYANMAR PLASTIC INDUSTRIES ASSOCIATION (MPIA)No. 29 Min Ye Kyaw Swar Street, UMFCCI Office Tower, 6th Floor Lanmadaw Township, Yangon, MyanmarTel/Fax: (951) 214835 E-mail: myanmarpia2000@gmail.com

PHILIPPINE PLASTICS INDUSTRY ASSN., INC. (PPIA)P.P.I.A. Building, 122A Del Mundo St. (W) Bet. 10th & 11th Ave Grace Park, Caloocan City, PhilippinesTel: (632)3611160/3304423/24 Fax: (632) 3611160 E-mail: secretariat.ppia@gmail.com

SINGAPORE PLASTIC INDUSTRY ASSOCIATION (SPIA) - AFPI PERMANENT SECRETARIAT15-B, Lorong 4 Geylang, Singapore 399272. Tel: (65)67435571 Fax: (65)67433309 E-mail: spia@spia.org.sg

VIETNAM PLASTICS ASSOCIATION (VPA)156 Nam Ky Khoi Nghia St., Ben Nghe Ward, District 1, Ho Chi Minh City, Vietnam Tel: (848) 3521 8552/53 Fax: (848) 3521 8554 E-mail: info@vpas.vn

Center for products submissionEntries submission closed 19 September 2014

Entrants can submit their entries to :

ASEAN Federation ofPlastic Industries (AFPI)

Presents

Creating new future forthe plastics industries in ASEAN

ASEAN

Plastics Awards

Background The ASEAN Federation of Plastic Industries (AFPI) wasfounded in 1981 by integrating the national Plastics IndustrialAssociations amongst ASEAN countries. The AFPI, now withseven members, seeks to promote intra-ASEAN economiccooperation and coordination in the field of plastic industry.Its other purpose is to develop and initiate preparation andimplementation of plans, programs and projects that willpromote and advance intra-ASEAN plastic industries and trade. During the 15th Term AFPI Council (2012-2014) meetingheld on April 3rd, 2013 in Thailand, AFPI realized that therewould be a huge impact from FTA in various frameworkswhich would influence Plastic market to become morecompetitive, especially in commodity products. Many manu-facturers have to reduce their costs for compatible priceswhile less consideration would be given to products’ quality.The integrated of ASEAN Economic Community (AEC) in 2015will inevitably be the target market for both importers andexporters as the market size would be increased to more than600 million people. The product contest is initiated as a partof the program to create distinguished awards for ASEANPlastic Industry under the name “THE 1st ASEAN PLASTICSAWARDS” so as to raise the standards, to develop andthe create more value added for ASEAN’s plastic products.The winners will receive a certificate and a medal as therecognition of the awards. The winners can use such recognitionfor marketing activities. The competition is hosted by Thailand with the collaborationof many organizations within member countries (of AFPI)namely THE INDONESIAN OLEFIN, AROMATIC AND PLASTICINDUSTRY ASSOCIATION (INAPLAS), MALAYSIAN PLASTICSMANUFACTURERS ASSOCIATION (MPMA), MYANMAR PLASTICINDUSTRIES ASSOCIATION (MPIA), PHILIPPINE PLASTICSINDUSTRY ASSN., INC. (PPIA), SINGAPORE PLASTIC INDUSTRYASSOCIATION (SPIA), VIETNAM PLASTICS ASSOCIATION (VPA),and PLASTIC INDUSTRY CLUB, THE FEDARATION OF THAIINDUSTRIES. The winners will be announced and awarded at the“Plastic Night 2014” Gala Dinner which will be held onWednesday 22nd October, 2014 at the Thai Army Club,Vibhavadi-Rangsit road, Bangkok, Thailand

Judging Criteria• The judges will be appointed by the AFPI committee and the decisions of the judges are final.• The judges reserve the right to move an entry from one category to another if they deem it more appropriate.• The judges reserve the right to select more than one winner in some categories or not to make an award in any category should the quantity of work not meets the standards set by the judging criteria. • All eligible entries are judged based on the merits of their quality of the production, manufacturing process, function, and design.• Entries will be judged according to the 4 criteria as follows: 1) Innovation & Function 2) Aesthetics 3) Environmental Concern 4) Overall Impression

Food Rigid Packaging: soft drink bottles, water bottles,

juice bottles, ready-to-eat food containers,instant noodle cups, etc.2

Non-food Rigid Packaging: oil containers, chemical bottles, detergent bottles, secondary packaging, etc.3

1Houseware Products: trays, bowls, plates, utensils, trash cans, tables, chairs, furniture and other plastic containers.

Objectives1. To raise the standard of the plastic manufacturing in ASEAN.2. To improve the quality and aesthetic of plastic products and encourage the value added creation of plastic products.3. To promote the innovation in plastic products.

Objectives

ASEAN

Plastics Awards

ASEAN

Plastics Awards

Electrical, Automotive andOther Durable Products/Parts.

Electrical, Automotive andOther Durable Products/Parts. 8

Flexible Packaging: stand up pouches, form-ffiill-seal sachets for coffee,

non-dairy creamer and ketchup, retorted pouches, etc.4Personal Care, Medical and Healthcare Products/Packaging/Devices: shampoo bottles, blister packs, pill containers, pharmaceutical bottles, cosmetic jars, cream tubes, syringes, saline bottles, sample collection tubes, toothbrushes, baby bottles, beverage bottles, liquid soap bottles, etc.5

Construction Products:pipe, ffiittings, construction equipments,

electrical conduits, construction parts, etc.

Construction Products:pipe, ffiittings, construction equipments,

electrical conduits, construction parts, etc.6Disposable Products: cutlery, chopsticks, straws, cups, tray boxes, plates, shopping bags, garbage bags, etc.

Disposable Products: cutlery, chopsticks, straws, cups, tray boxes, plates, shopping bags, garbage bags, etc.7

Main Product Categories

www.aseanplastic.com

Entries must be received by 19 September 2014

The competition is hosted by Thailand with the collaborationof many organizations within member countries (of AFPI)namely THE INDONESIAN OLEFIN, AROMATIC AND PLASTICINDUSTRY ASSOCIATION (INAPLAS), MALAYSIAN PLASTICSMANUFACTURERS ASSOCIATION (MPMA), MYANMAR PLASTICINDUSTRIES ASSOCIATION (MPIA), PHILIPPINE PLASTICSINDUSTRY ASSN., INC. (PPIA), SINGAPORE PLASTIC INDUSTRYASSOCIATION (SPIA), VIETNAM PLASTICS ASSOCIATION (VPA),and PLASTIC INDUSTRY CLUB, THE FEDARATION OF THAI

The winners will be announced and awarded at the“Plastic Night 2014” Gala Dinner which will be held on

2) Aesthetics 3) Environmental Concern 4) Overall Impression

1) Green or Sustainable Awards: a product that has been designed such that it has minimal negative impact on the global or local environment, community, society, or economy. The Green or Sustainable Award, has been especially established to honor companies, institutions and designers who have respect for the environment and who plan for a better future2) Innovation Awards: including innovation in product design, raw material and manufacturing process.

For any inquiries about THE 1st ASEAN PLASTICS AWARDS, please contact:PLASTIC INDUSTRY CLUB, THE FEDERATION OF THAI INDUSTRIES 4th Floor, Zone C, Queen Sirikit National Convention Center (QSNCC)60 New Rachadapisek Road, Klongtoey, Bangkok 10110, ThailandTel: +(66)2 345 1006 Fax: +(66)2 229 4654 Email: info@ftiplastic.com

Competition Terms & Conditions1) Entries shall be submitted by individuals, companies or associations involved in any area of plastic manufacturing process including • Plastic converters • Manufacturers of resins, compounds, masterbatch, and pigment • Manufacturers of machines and molds. • Product/brand owner • Designer • People involved with the plastic industry2) Entries (Products) must be manufactured in ASEAN and commercialized. 3) An applicant can enter as many products in as many different categories.4) An application form is for one entry per category. In case an entrant would like to contend the product in several categories, separate application forms and products for each category are required. The entrant must fill in both parts of the application form. (The first part about the entrant’s information such as company name, etc. will remain confidential and not be disclosed to the Judging Panel.) 5) An entrant shall submit two duplicate entries for each category (provision in case of product damage).

Entry Fees : 50US$ /EntryOne application is considered as one entry even the same productis submitted for more than one category

Payment Information• Cash/Cheque to be made payable to “the Federation of Thai Industries” • Money transferring to saving account of “the Federation of Thai Industries” Krungthai Bank, Queen Sirikit National Convention Center branch at account number 009-1-70874-5• SWIFT Code : KRTHTHBK• The Federation of Thai Industries was established under the F.T.I Act, 1987. As it is the private sector administrative juristic person to serve as the core organization and as the center for all Thai industries in the kingdom, FTI is not considered a “Company Limited”, or a “Limited Partnership” under Section 39 of the Revenue Code, so it is not subjected to deduction of 3% with holding tax

Remark : Please fax application form and pay-in slip to +66(0)2 229-4654 to get a receipt

Prizes :

Main AwardsSupreme Award: The judges will select from the winner of each ofthe main category.Gold Award: for the winner of each of the main category.Silver Award and Bronze Award: for the runner-up of each of themain category

Special AwardsGreen Award: for the winner who submit the products to competein green category.Innovation Award: for the winner who submit the products tocompete in innovation category.

ASEANPlastics Awards

2014

The 1st

ASEANPlastics Awards

2014

The 3rd

ASEANPlastics Awards

2014

The 2nd

(The following information is not accessible by the judging panel.)

Title of Entry …………………………………………………..….......................................................................................................................…......…………

Category entered ……………………………………………..…................................................................................…………....................................….……

Entered by (company/association name) ……………………………………………..…...........................................................................................………

Contact person ....................................................................................................................................................................................………...

Address ………………………………………………………………………………....................................................................................................……….............

Phone ……............….....................… Country ……...............….................… Email ………………………………………………….........................................

Client name ........................................................................................................………………………………………………….........................................

Product designed by ..........................................................................................………………………………………………….........................................

Manufactured by ……………………………………………………...........................................…………………………………………………......................................

Brand of machine and type of machine ………………………………….......................................………….........………………………………………………….......

Name of material manufacturer and type of materials ……………………………………………………………………………………..........................................

Signed ………………........…………………………………………………......................... Date……………………….......................................................................

Application Form (Part 2)

Number (for official use only) .......................................................

Number (for official use only) .......................................................

Application Form (Part 1)

Entered Category ...........................................................................................................................................................................................

Title of Entry ………...........…….............................................................…… Quantity Produced ………………………………....………….....…................

Production Process .................................................................................................................………………………………....………….....…................

If available, please provide the details of your product in each criteria.

Innovation & Function …………………………………………………………………………………………………………………………………………....………….....…...............

.........................………………………………....………….....…........................................................................................................................................

.........................………………………………....………….....…........................................................................................................................................

.........................………………………………....………….....…........................................................................................................................................

Aesthetics ..........................………………………………....………….....…......................................................................................................................

.........................………………………………....………….....…........................................................................................................................................

.........................………………………………....………….....…........................................................................................................................................

.........................………………………………....………….....…........................................................................................................................................

Environmental Concern .........................………………………………....………….....….................................................................................................

.........................………………………………....………….....…........................................................................................................................................

.........................………………………………....………….....…........................................................................................................................................

.........................………………………………....………….....…........................................................................................................................................

Overall Impression .........................………………………………....………….....….........................................................................................................

.........................………………………………....………….....…........................................................................................................................................

.........................………………………………....………….....…........................................................................................................................................

.........................………………………………....………….....…........................................................................................................................................

You can attach addition information about the products you have summitted to help the judges understand about your process and

reason to be the winners.

.........................………………………………....………….....…........................................................................................................................................

.........................………………………………....………….....…........................................................................................................................................

.........................………………………………....………….....…........................................................................................................................................

.........................………………………………....………….....…........................................................................................................................................

PLASTICS INSTITUTE OF THAILANDFoundation For Industrial Development Plastics Institute Of Thailand MIDI Building, 86/6 Soi Treemit, Rama IV Road, Klongtoey, Klongtoey, Bangkok 10110, ThailandTel: 662 391 5340-3 Fax: 662 712 3341 Email: unya.p@thaiplastics.org

THE INDONESIAN OLEFIN, AROMATIC AND PLASTIC INDUSTRY ASSOCIATION (INAPLAS)Grand Slipi Tower, Floor 21 suite A Jl. LetJen. S. Parman Kav. 22-24 Slipi Jakarta 12160. Indonesia.Tel: (6221)2902 2025 Fax: (6221) 2902 1944 E-mail: inaplas.jakarta@gmail.com

MALAYSIAN PLASTICS MANUFACTURERS ASSOCIATION (MPMA)37 Jalan 20/14, Paramount Garden, 46300 Petaling Jaya, Selangor, Darul Ehsan, Malaysia. Tel: (603)78763027 Fax: (603)78768352 E-mail: info@mpma.org.my

MYANMAR PLASTIC INDUSTRIES ASSOCIATION (MPIA)No. 29 Min Ye Kyaw Swar Street, UMFCCI Office Tower, 6th Floor Lanmadaw Township, Yangon, MyanmarTel/Fax: (951) 214835 E-mail: myanmarpia2000@gmail.com

PHILIPPINE PLASTICS INDUSTRY ASSN., INC. (PPIA)P.P.I.A. Building, 122A Del Mundo St. (W) Bet. 10th & 11th Ave Grace Park, Caloocan City, PhilippinesTel: (632)3611160/3304423/24 Fax: (632) 3611160 E-mail: secretariat.ppia@gmail.com

SINGAPORE PLASTIC INDUSTRY ASSOCIATION (SPIA) - AFPI PERMANENT SECRETARIAT15-B, Lorong 4 Geylang, Singapore 399272. Tel: (65)67435571 Fax: (65)67433309 E-mail: spia@spia.org.sg

VIETNAM PLASTICS ASSOCIATION (VPA)156 Nam Ky Khoi Nghia St., Ben Nghe Ward, District 1, Ho Chi Minh City, Vietnam Tel: (848) 3521 8552/53 Fax: (848) 3521 8554 E-mail: info@vpas.vn

Center for products submissionEntries submission closed 19 September 2014

Entrants can submit their entries to :

ASEAN Federation ofPlastic Industries (AFPI)

Presents

Creating new future forthe plastics industries in ASEAN

ASEAN

Plastics Awards

Background The ASEAN Federation of Plastic Industries (AFPI) wasfounded in 1981 by integrating the national Plastics IndustrialAssociations amongst ASEAN countries. The AFPI, now withseven members, seeks to promote intra-ASEAN economiccooperation and coordination in the field of plastic industry.Its other purpose is to develop and initiate preparation andimplementation of plans, programs and projects that willpromote and advance intra-ASEAN plastic industries and trade. During the 15th Term AFPI Council (2012-2014) meetingheld on April 3rd, 2013 in Thailand, AFPI realized that therewould be a huge impact from FTA in various frameworkswhich would influence Plastic market to become morecompetitive, especially in commodity products. Many manu-facturers have to reduce their costs for compatible priceswhile less consideration would be given to products’ quality.The integrated of ASEAN Economic Community (AEC) in 2015will inevitably be the target market for both importers andexporters as the market size would be increased to more than600 million people. The product contest is initiated as a partof the program to create distinguished awards for ASEANPlastic Industry under the name “THE 1st ASEAN PLASTICSAWARDS” so as to raise the standards, to develop andthe create more value added for ASEAN’s plastic products.The winners will receive a certificate and a medal as therecognition of the awards. The winners can use such recognitionfor marketing activities. The competition is hosted by Thailand with the collaborationof many organizations within member countries (of AFPI)namely THE INDONESIAN OLEFIN, AROMATIC AND PLASTICINDUSTRY ASSOCIATION (INAPLAS), MALAYSIAN PLASTICSMANUFACTURERS ASSOCIATION (MPMA), MYANMAR PLASTICINDUSTRIES ASSOCIATION (MPIA), PHILIPPINE PLASTICSINDUSTRY ASSN., INC. (PPIA), SINGAPORE PLASTIC INDUSTRYASSOCIATION (SPIA), VIETNAM PLASTICS ASSOCIATION (VPA),and PLASTIC INDUSTRY CLUB, THE FEDARATION OF THAIINDUSTRIES. The winners will be announced and awarded at the“Plastic Night 2014” Gala Dinner which will be held onWednesday 22nd October, 2014 at the Thai Army Club,Vibhavadi-Rangsit road, Bangkok, Thailand

Judging Criteria• The judges will be appointed by the AFPI committee and the decisions of the judges are final.• The judges reserve the right to move an entry from one category to another if they deem it more appropriate.• The judges reserve the right to select more than one winner in some categories or not to make an award in any category should the quantity of work not meets the standards set by the judging criteria. • All eligible entries are judged based on the merits of their quality of the production, manufacturing process, function, and design.• Entries will be judged according to the 4 criteria as follows: 1) Innovation & Function 2) Aesthetics 3) Environmental Concern 4) Overall Impression

Food Rigid Packaging: soft drink bottles, water bottles,

juice bottles, ready-to-eat food containers,instant noodle cups, etc.2

Non-food Rigid Packaging: oil containers, chemical bottles, detergent bottles, secondary packaging, etc.3

1Houseware Products: trays, bowls, plates, utensils, trash cans, tables, chairs, furniture and other plastic containers.

Objectives1. To raise the standard of the plastic manufacturing in ASEAN.2. To improve the quality and aesthetic of plastic products and encourage the value added creation of plastic products.3. To promote the innovation in plastic products.

Objectives

ASEAN

Plastics Awards

ASEAN

Plastics Awards

Electrical, Automotive andOther Durable Products/Parts.

Electrical, Automotive andOther Durable Products/Parts. 8

Flexible Packaging: stand up pouches, form-ffiill-seal sachets for coffee,

non-dairy creamer and ketchup, retorted pouches, etc.4Personal Care, Medical and Healthcare Products/Packaging/Devices: shampoo bottles, blister packs, pill containers, pharmaceutical bottles, cosmetic jars, cream tubes, syringes, saline bottles, sample collection tubes, toothbrushes, baby bottles, beverage bottles, liquid soap bottles, etc.5

Construction Products:pipe, ffiittings, construction equipments,

electrical conduits, construction parts, etc.

Construction Products:pipe, ffiittings, construction equipments,

electrical conduits, construction parts, etc.6Disposable Products: cutlery, chopsticks, straws, cups, tray boxes, plates, shopping bags, garbage bags, etc.

Disposable Products: cutlery, chopsticks, straws, cups, tray boxes, plates, shopping bags, garbage bags, etc.7

Main Product Categories

www.aseanplastic.com

Entries must be received by 19 September 2014

The competition is hosted by Thailand with the collaborationof many organizations within member countries (of AFPI)namely THE INDONESIAN OLEFIN, AROMATIC AND PLASTICINDUSTRY ASSOCIATION (INAPLAS), MALAYSIAN PLASTICSMANUFACTURERS ASSOCIATION (MPMA), MYANMAR PLASTICINDUSTRIES ASSOCIATION (MPIA), PHILIPPINE PLASTICSINDUSTRY ASSN., INC. (PPIA), SINGAPORE PLASTIC INDUSTRYASSOCIATION (SPIA), VIETNAM PLASTICS ASSOCIATION (VPA),and PLASTIC INDUSTRY CLUB, THE FEDARATION OF THAI

The winners will be announced and awarded at the“Plastic Night 2014” Gala Dinner which will be held on

2) Aesthetics 3) Environmental Concern 4) Overall Impression

1) Green or Sustainable Awards: a product that has been designed such that it has minimal negative impact on the global or local environment, community, society, or economy. The Green or Sustainable Award, has been especially established to honor companies, institutions and designers who have respect for the environment and who plan for a better future2) Innovation Awards: including innovation in product design, raw material and manufacturing process.

For any inquiries about THE 1st ASEAN PLASTICS AWARDS, please contact:PLASTIC INDUSTRY CLUB, THE FEDERATION OF THAI INDUSTRIES 4th Floor, Zone C, Queen Sirikit National Convention Center (QSNCC)60 New Rachadapisek Road, Klongtoey, Bangkok 10110, ThailandTel: +(66)2 345 1006 Fax: +(66)2 229 4654 Email: info@ftiplastic.com