B737-3/4/5 CFM56 MAINTENANCE PRACTICE TRAINING MANUAL B1 ... de formation... · B737-3/4/5 CFM56 Maintenance Practice Training Manual ... Maintenance Practice Training Manual B1/B2

B737-3/4/5 CFM56 Maintenance Practice Training Manual

B1/B2

DOC.FOR.14 Ed3 1/38

B737-3/4/5 CFM56 MAINTENANCE PRACTICE

TRAINING MANUAL B1/B2 LEVEL

DERICHEBOURG ATIS Aéronautique - ATIS Aviation

Parc Algorithmes, Immeuble Thalès – 17, Avenue Didier Daurat 31700 Blagnac : 05 34 60 61 40 - : 05 34 60 61 50

ATIS Aéronautique Parc Algorithmes Immeuble Thalès

17, ave Didier Daurat 31700 BLAGNAC


B1/B2

DOC.FOR.14 Ed3 2/38

ON JOB TRAINING Type: B1 B2 B1/B2 Starting date : / / Ending Date : / / Performed at :

DERICHEBOURG ATIS AÉRONAUTIQUE STAMP :

PRACTICAL ASSESSORS Licence

number/Stamp NAME Signature Date

Validation by Quality Department:

Date: Name: Signature:

TRAINEE SURNAME: Forename:

Licence number:

Experience on an aircraft with similar technology: YES NO

Signature: Date : / /




B1/B2

DOC.FOR.14 Ed3 3/38

SUBJECT The aim of this document is to record all the practical tasks performed by engineers within ATIS Aviation, PART 145 FR.145.107 approved maintenance organisation, in order to comply with the requirements of Appendix III of PART 66 to have the B1/B2 rating on B737-3/4/5 CFM56 aircraft.

Any task performed in the frame of this On Job Training (OJT) will have to be signed by the trainee engineer and validated by assessors. This OJT will be performed under the responsibility of one or more B1/B2 qualified engineers. (See “PRE-REQUISIT” on page 4/38)

After this training, the engineer will be able to: - perform verifications of systems, engines, components and operational functions such as

specified in the maintenance manual, - analyse all information in order to make decisions regarding trouble shooting and corrective

actions as per maintenance manual, - describe the component replacement procedures specific to aircraft type.

DURATION - Engineer with B1/B2 rating and six month experience on an aircraft with a similar technology: 70 hours(1),

- Engineer with B1/B2 rating and less than six month experience on an aircraft with a similar technology: 140 hours(1),

- Engineer with no B1/B2 rating on an aircraft with a similar technology: four months. (1)The 70/140 hours do not have to be necessarily performed in a row, but can be extended on a period adapted to operational configuration (availability of aircraft, trainee and assessors). CLASSIFICATION Classifies the importance of a task for the completion of the practical training record. Following classifications are used: - Mandatory (M): This indicates that the related task is required for completion of the

practical training record. - Optional (O): This indicates that the related task is optional. It is recommended to

perform at least 70% of those tasks in each ATA chapter.

TASKS CODES - FOT: Functional Operational Test(*) - LOC: Location and identification of system components - MEL: Minimum Equipment List items requiring a maintenance procedure - RIA: Removal Installation Activation - SGH: Servicing Ground Handling - TPR: Thorough Procedural Review - TVC: Carry out Thorough Visual Check

(*) If ground power or other applicable systems are unavailable a TPR will be carried out in place of a FOT.




B1/B2

DOC.FOR.14 Ed3 4/38

SIGNING OFF THE TASKS Part 66 Appendix 3 paragraph 2.2 requires that the practical training element must consist of the performance of representative tasks and their assessment, in order to meet the following objectives:

a) Ensure safe performance of maintenance, inspections and routine work according to the maintenance manual and other relevant instructions and tasks as appropriate for the type of aircraft, for example troubleshooting, repairs, adjustments, replacements, rigging and functional checks such as engine run, etc, if required,

b) Correctly use all technical literature and documentation for the aircraft, c) Correctly use specialist/special tooling and test equipment, perform removal and

replacement of components The nominated trainer/assessor will sign off each task when satisfied that the trainee has attained the demonstrable level of understanding that is required. PRE-REQUISIT The trainee must have participated and succeeded in a PART 147 theoretical type rating training (T1/T2 training). The assessors must have an experience of five years in the line maintenance and two years in the qualification of type. For any OJT, the assessors will have to make a request by email at the Quality Department for validation of pre-requisit. ADDITIONAL PRACTICE At least one trouble shooting among the major ATA (*) must be performed. To be added in the additional practice from page 35. (*) ATA major: 21 to 80.




B1/B2

DOC.FOR.14 Ed3 5/38

Item ref. ATA Subject Class B1 B2 Task

code Date Trainee’s signature

Assessor’s signature

ATA 00 - Introduction 00-001 00 Identify aircraft manuals and documentation M X X /

00-002 00 Cockpit familiarisation M X X LOC

00-003 00 Servicing M X X TVC

00-004 00 External power points M X X TVC

00-005 00 Hydraulic servicing M X X TVC

00-006 00 Fuelling panel M X X TVC

00-007 00 Defuelling M X X TVC

00-008 00 Toilet servicing M X X TVC

00-009 00 Water servicing M X X TVC

ATA 05 - Time Limits/Maintenance Checks

05-001 Aircraft Technical Logbook M X X TPR

05-002 05-20 Walk around, Daily, Weekly checks M X X TVC

05-003 05-50-00 Unscheduled maintenance checks (after abnormal events: hard or overweight landing, lightning strike, bird strike, etc. )

M X X TPR

ATA 06 – Dimentions and areas

06-001 06-13-00 Principe dimensions and areas M X X LOC

REMARKS :




B1/B2

DOC.FOR.14 Ed3 6/38




ATA 07 – Lifting and shoring

07-001 07-00-00 Jack Airplane O X TPR

07-002 07-11-01 Primary/secondary jacking points O X TPR

07-003 07-11-03 Jack axles O X TPR

07-004 07-20-00 Shoring O X TPR

ATA 09 - Towing and Taxiing

09-001 09-11-00 Towing maintenance practices M X TPR

09-002 09-11-04 Tow Airplane with Flat Tires O X TPR

ATA 10 - Parking and Mooring

10-001 10-11-00 Normal Parking M X TPR

10-002 10-13-00 High wind conditions parking O X TPR

REMARKS :




B1/B2

DOC.FOR.14 Ed3 7/38




ATA 12 - Servicing

12-001 12-11-00 Fuelling and defuelling M X SGH

12-002 12-11-00 Fuel system drainage O X SGH

12-003 12-12-00 Hydraulic reservoir servicing M X SGH

12-004 12-13-11 Engine servicing M X SGH

12-005 12-13-21 IDG servicing M X SGH

12-006 12-13-31 APU Servicing M X SGH

12-007 12-13-41 Engine starter servicing M X SGH

12-008 12-14-01 Potable water servicing M X LOC

12-010 12-15-02 Landing gear fluid servicing O X SGH

12-011 12-15-11 Hydraulic Brake accumulator servicing O X SGH

12-012 12-15-21 Oxygen servicing O X LOC

12-013 12-15-31 Main landing gear gas servicing O X TPR

12-014 12-15-41 Nose landing gear gas servicing O X TPR

12-015 12-15-51 Landing gear tires servicing M X SGH

12-016 12-17-00 Toilet M X LOC

12-017 12-31-00 Access doors and panels M X LOC

REMARKS :




B1/B2

DOC.FOR.14 Ed3 8/38




ATA 20 – Standard Practices

20-001 20-22-01 Electrical bonding M X X TVC

20-002 20-40-12 ESDS Devices/Procedures M X X SGH

ATA 21 - Air Conditioning

21-001 21-00-00 Cockpit and control indications M X TVC

21-002 21-00-00 External source M X LOC

21-003 21-00-00 Pack operation M X SGH

21-004 21-20-00 Distribution M X LOC

21-005 21-21-00 Main distribution manifold M X TVC

21-006 21-25-00 Recirculation fan filter O X SGH

21-007 21-27-00 Equip cooling low flow detector bite test M X TPR

21-008 21-27-01 Equip cooling air filter O X LOC

21-009 21-30-00 Pressurization control M X LOC

21-010 21-31-00 Operational test (auto-standby-manual) of Pressurization control system M X FOT

21-011 21-31-00 Pressurization control system System test AC or DC manual mode M X MEL

21-012 21-33-07 Cabin altitude/Differential pressure indicator O X TVC

21-013 21-41-00 Control and passenger heating O X LOC

21-014 21-45-00 Door area heating O X LOC

21-015 21-43-00 Cargo compartment heating O X LOC

21-016 21-50-00 Cooling O X LOC

21-017 21-51-00 Cooling –Air cycle system O X LOC

21-018 21-51-01 Air conditioning “Pack” valve O X RIA

21-019 21-51-05 Water Separator Coalescer Bag Replacement O X SGH

21-020 21-51-22 Ram air inlet deflector door O X LOC

21-021 21-52-00 Ram Air system O X LOC

21-022 21-58-02 EFIS supply cooling system M X LOC

21-023 21-61-00 Temperature control M X LOC

21-024 21-61-00 Pack/zone temperature controller Bite test M X FOT

21-025 21-61-30 Duct sensor O X SGH

21-026 21-61-31 Cabin sensor O X SGH




B1/B2

DOC.FOR.14 Ed3 9/38




21-027 21-62-00 Temperature indicating system M X LOC

21-028 / Air conditioning and pressurisation MEL maintenance procedures M X MEL

REMARKS :




B1/B2

DOC.FOR.14 Ed3 10/38




ATA 22 - Auto flight

22-001 22-00-00 Auto Flight System controls and indications in cockpit M X X TVC

22-002 22-00-00 Auto Flight System components M X X LOC

22-003 22-11-00 DFCS BITE test Line Maintenance Quick test, Operational test M X X FOT

22-004 22-11-01 Digital Flight Control System rigging test M X X FOT

22-005 22-11-24 Mach trim actuator O X X TPR

22-006 22-11-14 Elevator neutral shift sensor rigging O X X TPR

22-007 22-11-25 Autopilot actuator rigging M X X TPR

22-008 22-11-27 Spoiler position sensor ringing M X X TPR

22-009 22-11-29 Aileron position sensor rigging procedure M X X TPR

22-010 22-11-30 Elevator position sensor rigging procedure M X X TPR

22-011 22-11-31 Stabiliser position sensor rigging M X X TPR

22-012 22-11-32 Auto flight status annunciator O X X LOC

22-013 22-11-33 Flight control computer O X X LOC

22-014 22-11-34 DFCS Mode control panel: maintenance practices M X X TVC

22-015 22-11-37 Integrated flight system accessory unit O X X LOC

22-016 22-11-39 Toga switch removal installation O X X FOT

22-017 22-11-40 Hydraulic pressure switch REM/INS O X X FOT

22-018 22-11-41 Autopilot disengage switch REM/INS O X X FOT

22-019 22-23-00 Yaw damper system components M X X LOC

22-020 22-23-00 Stall management & yaw damper computers 1 & 2 test M X X FOT

22-021 22-31-00 Auto-throttle system components M X X LOC

22-022 22-31-00 Auto-throttle computer bite test & ground test M X X FOT

22-023 / Auto Flight MEL maintenance procedures M X X MEL




B1/B2


REMARKS :




B1/B2





ATA 23 - Communication

23-001 23-00-00 Communication system components M X X TVC

23-002 23-00-00 Communication system controls and indications in the cockpit M X X LOC

23-003 23-11-00 HF operation test O X X TPR

23-004 23-11-00 HF Transceiver bite test O X X TPR

23-005 23-11-61 HF Vertical fin antenna O X X LOC

23-006 23-11-61 HF Antenna coupler O X X LOC

23-007 23-12-00 VHF communication system M X X LOC

23-008 23-12-00 VHF operational test M X X FOT

23-009 23-24-00 ELT Test O X X FOT

23-010 23-28-00 Selcal system O X X LOC

23-011 23-31-00 Passenger address amplifier test O X X TPR

23-012 23-32-00 Video system control unit test O X X FOT

23-013 23-34-01 Audio entertainment player bite test O X X FOT

23-014 23-36-01 Boarding music player test O X X FOT

23-015 23-41-00 Service interphone test O X X FOT

23-016 23-43-00 Flight and ground call test M X X FOT

23-017 23-51-02 Audio control panel test M X X FOT

23-018 23-61-00 Static discharger inspection O X X SGH

23-019 23-61-00 Static discharger replacement O X X RIA

23-020 23-71-00 Voice recorder system O X X FOT

23-021 / Communication MEL maintenance procedures M X X MEL

REMARKS :




B1/B2





ATA 24 - Electrical power

24-001 24-00-00 Electrical system controls and indications in the cockpit M X X TVC

24-002 24-00-00 Components location M X X LOC

24-003 24-09-11 Precautions –Electrical power Maintenance practices Standard wiring practices ATA 20

M X X TPR

24-004 24-11-00 IDG functional and operational test M X X FOT

24-005 24-11-11 VSCF: Fault history messages O X X SGH

24-006 24-11-11 CSD: Disconnect reset T handle O X X SGH

24-007 24-21-00 AC Generation system components M X X LOC

24-008 24-21-00 APU AC Generator test M X X FOT

24-009 24-21-54 Power system test module M400 M

X X LOC

24-010 24-21-81 GCU APU test M

X X FOT

24-011 24-31-00 DC Generation system components M X X LOC

24-012 24-31-00 DC Generation system test M X X FOT

24-013 24-31-11 Battery M X X LOC

24-014 24-31-11 Main battery replacement M X X RIA

24-015 24-31-21 Battery charger test M X X FOT

24-016 24-31-31 Auxiliary battery charger O X X TPR

24-017 24-31-41 Dual battery remote control CB O X X FOT

24-018 24-34-00 Stand by power control unit test M X X FOT

24-019 24-41-00 AC External Power operational test M X X FOT

24-020 24-50-00 Electrical load distribution components M X X LOC

24-021 24-51-00 Main 115 volt AC power M X X LOC

24-022 24-52-00 28 volt AC power distribution M X X LOC

24-023 24-54-00 Standby power system components M X X LOC

24-024 24-54-00 Standby power system operational test M X X FOT

24-025 / Electrical system MEL procedures M X X MEL




B1/B2


REMARKS :




B1/B2





ATA 25 - Equipment & Furnishing

25-001 25-00-00 Equipment / Furnishings components location M X LOC

25-002 25-11-11 Crew seat adjustment M X SGH

25-003 25-20-00 Passenger seats O X SGH

25-004 25-21-00 Passenger cabin panels O X RIA

25-005 25-25-12 Cabin attendant seats O X LOC

25-006 25-31-00 Galleys O X LOC

25-007 25-40-00 Lavatories O X LOC

25-008 25-52-00 Cargo compartments Blowout panels Pressure equalization valve

O X LOC

25-009 25-60-00 Emergency equipment O X LOC

25-010 25-61-10 Escapes ropes / Straps and Lanyards O X TVC

25-011 25-61-35 Escape slides check O X SGH

25-012 25-63-00 Emergency evacuation signal system operational test M X FOT

25-013 / Equipment and furnishing MEL maintenance procedures M X MEL

REMARKS :




B1/B2





ATA 26 - Fire protection

26-001 26-00-00 Fire protection controls and indications in the cockpit M X X TVC

26-002 26-10-00 Fire detection system components M X X LOC

26-003 26-11-00 APU and Engine fire detection system operational test M X X FOT

26-004 26-14-00 Lavatory smoke detection system test O X X FOT

26-005 26-16-01 Cargo bay smoke detection test M X X FOT

26-006 26-16-02 Cargo electric unit M X X FOT

26-007 26-17-00 Wheel well overheat detection O X X FOT

26-008 26-18-00 Wing and lower AFT Body overheat O X X LOC

26-009 26-18-00 Wing and lower AFT Body overheat Built –in test procedures O X X FOT

26-010 26-21-00 Engine fire extinguishing system O X X LOC

26-011 26-21-00 Engine fire extinguishing system test O X X FOT

26-012 26-21-11 Engine fire bottle replacement O X X RIA

26-013 26-22-00 APU fire extinguishing system M X X SGH

26-014 26-23-00 CARGO compartment fire extinguishing system O X X SGH

26-015 26-24-00 Lavatory fire extinguishing system O X X FOT

26-016 / Fire protection MEL maintenance procedures M X X MEL

REMARKS :




B1/B2





ATA 27 - Flight Controls

27-001 27-00-00 Flight controls :controls and indications in the cockpit M X X TVC

27-002 27-00-00 Flight control components location M X X LOC

27-003 27-09-21 Flight controls hydraulic modular O X LOC

27-004 27-11-00 Aileron and aileron trim components location O X LOC

27-005 27-11-00 Aileron and aileron trim control system test O X FOT

27-006 27-21-00 Rudder and rudder trim control system O X LOC

27-007 27-21-00 Rudder and rudder trim control system test O X FOT

27-008 27-31-00 Elevator and elevator tab control system M X LOC

27-009 27-31-00 Elevator and elevator tab control system test M X FOT

27-010 27-31-17 Pitot static system drainage Inspection O X SGH

27-011 27-32-00 Stall warning system components location M X LOC

27-012 27-32-00 Stall warning system operational check M X FOT

27-013 27-41-00 Horizontal stabilizer trim control system M X LOC

27-014 27-41-00 Horizontal stabilizer trim control system test M X FOT

27-015 27-51-00 Trailing edge flaps system components location M X LOC

27-016 27-51-00 Trailing edge flaps system test M X FOT

27-017 27-51-00 Flap/slats electronic unit bite test O X FOT

27-018 27-58-00 Trailing edge Flaps position indicating system components location M X LOC

27-019 27-58-00 Trailing edge Flaps position indicating system test M X FOT

27-020 27-58-02 Trailing edge Flaps position indicator replacement M X RIA

27-021 27-59-00 Flap skew detection system test M X FOT

27-22 27-59-01 Flap skew sensors location M X LOC

27-023 27-61-00 Flight spoiler system components location M X LOC

27-024 27-61-00 Flight spoiler system test M X FOT

27-025 27-62-00 Auto speed brake control system components location O X LOC

27-026 27-62-00 Auto speed brake control system test O X FOT

27-027 27-81-00 Leading edge flap and slat control system components location O X LOC

27-028 27-81-00 Leading edge flap and slat control system test O X FOT




B1/B2


27-029 27-81-31 Leading edge slat actuator replacement O X RIA

27-030 27-83-00 Leading edge Auto slat control system components location O X LOC

27-031 27-83-00 Leading edge Auto slat control system test O X FOT

27-032 27-88-11 Leading edge flaps and slats position indicating system components location O X LOC

27-033 27-88-11 Leading edge flaps and slats position indicating system test O X FOT

27-034 / Flight controls MEL maintenance procedures M X MEL

REMARKS :




B1/B2





ATA 28 - Fuel

28-001 28-00-00 Fuel controls and indications in the cockpit M X TVC

28-002 28-10-00 Fuel tanks components location M X LOC

28-003 28-13-00 Fuel vent system O X SGH

28-004 28-15-00 Centre tank scavenge system O X FOT

28-005 28-21-00 Pressure fuelling system M X LOC

28-006 28-22-00 Engine fuel feed system O X LOC

28-007 28-22-14 Engine fuel spar valve battery M X TPR

28-008 28-22-41 Fuel boost pump replacement O X RIA

28-009 28-23-00 Defuelling maintenance practices O X TPR

28-010 28-23-00 Transfer fuel from tank to tank O X SGH

28-011 28-41-03 Fuel quantity indicating system M X LOC

28-012 28-41-03 Fuel quantity indicating system test M X FOT

28-013 28-43-11 Fuel temperature bulb O X FOT

28-014 / Fuel tank safety / CDCCL awareness M X TPR

28-015 / Fuel system MEL maintenance procedures M X MEL

REMARKS :




B1/B2





ATA 29 - Hydraulic power

29-001 29-00-00 Hydraulic power controls and indications in the cockpit O X TVC

29-002 29-00-00 A hydraulic system components O X LOC

29-003 29-00-00 B hydraulic system components O X LOC

29-004 29-00-00 Stand-by hydraulic system components M X LOC

29-005 29-09-00 Hydraulic reservoir pressurization system O X LOC

29-006 29-09-00 Pressurize the hydraulic reservoirs ( APU ) and release the pressure from hydraulic reservoirs

O X FOT

29-007 29-15-00 Pressurize the Standby hydraulic system M X FOT

29-008 29-15-22 Pressurize A or B hydraulic system with Electric motor driven pump (EMDP) M X FOT

29-009 29-22-00 Power Transfer Unit O X LOC

29-010 29-22-00 Power Transfer Unit operational test O X FOT

29-011 29-31-00 Hydraulic pressure indicating system O X LOC

29-012 29-32-01 Hydraulic fluid overheat warning O X LOC

29-013 29-33-01 Hydraulic fluid quantity indicating system O X LOC

29-014 29-34-01 Pump low pressure warning system O X LOC

29-015 / Hydraulic power MEL maintenance procedures M X MEL

REMARKS :




B1/B2





ATA 30 - Ice & rain protection

30-001 30-00-00 Ice and rain protection controls and indicators in the cockpit M X X TVC

30-002 30-11-00 Wing thermal anti icing system O X X LOC

30-003 30-11-11 Wing thermal anti icing shutoff valve O X X RIA

30-004 30-11-41 Wing anti ice control: module P5-11 M X X LOC

30-005 30-21-00 Inlet cowl anti icing system M X X LOC

30-006 30-31-00 Pitot static tubes ,Temperature probe, and AOA probe anti icing system O X X LOC

30-007 30-31-00 Pitot static tubes ,Temperature probe , and AOA probe anti icing system Test P5-9 O X X FOT

30-008 30-41-00 Control cabin window anti icing system O X X LOC

30-009 30-41-11 Window heat control unit operational test O X X FOT

30-010 30-42-00 Windshield wiper system O X X LOC

30-011 30-42-11 Windshield wiper replacement M X X RIA

30-012 30-43-00 Hydrophobic coating O X X FOT

30-013 30-71-00 Water and Toilet drain anti icing system O X X LOC

30-014 / Ice and rain protection MEL maintenance procedures M X X MEL

REMARKS :




B1/B2





ATA 31 - Indicating & recording system

31-001 31-00-00 Indicating and recording system controls and indicators in the cockpit M X X TVC

31-002 31-00-00 Indicating and recording system components O X X LOC

31-003 31-24-09 Emergency Locator Transmitter O X X LOC

31-004 31-25-00 Clocks test O X X FOT

31-005 31-26-00 Aural warning system operational test O X X FOT

31-006 31-26-00 Aural warning Module bite test O X X FOT

31-007 31-31-00 Flight data recorder system test and download O X X FOT

31-008 31-31-00 Digital flight data acquisition unit bite test O X X FOT

31-009 31-52-00 Master caution system O X X FOT

31-010 31-54-21 Rudder position transmitter O X X FOT

31-011 31-62-11 Display electronic unit M X X FOT

31-012 / Indicating and recording system MEL maintenance procedures M X X MEL

REMARKS :




B1/B2





ATA 32 - Landing Gear

32-001 32-00-00 Landing gear controls and indicators in the cockpit M X TVC

32-002 32-00-01 Ground lock assemblies maintenance pratices M X RIA

32-003 32-09-01 Landing gear safety sensors M X LOC

32-004 32-09-10 Proximity switch electronics unit bite test O X FOT

32-005 32-11-00 Main gear components location O X LOC

32-006 32-12-01 Main gear wheel well seal system O X SGH

32-007 32-13-00 Main gear shock strut doors O X SGH

32-008 21-21-00 Nose landing gear components location O X LOC

32-009 32-22-00 Nose gear doors ground opening and closing O X SGH

32-010 32-32-00 Main gear extension and retraction O X TVC

32-011 32-33-00 Nose gear extension and retraction O X TVC

32-012 32-34-00 Main gear manual extension O X TVC

32-013 32-41-41 Maint landing gear brakes O X TVC

32-014 32-42-00 Antiskid autobrake control unit bite test O X FOT

32-015 32-45-11 Main wheel replacement M X RIA

32-016 32-45-21 Nose wheel replacement M X RIA

32-017 32-51-00 Nose wheel steering operation O X FOT

32-018 32-61-00 Landing gear position indicating and warning system M X FOT

32-019 32-61-21 Sensor, main gear up lock O X FOT

32-020 / Landing gear MEL maintenance procedures M X MEL

REMARKS :




B1/B2





ATA 33 - Lights

33-001 33-00-00 Lights controls and indicators in the cockpit M X X TVC

33-002 33-10-00 Flight compartment lighting operational test M X X FOT

33-003 33-15-00 Master warning and caution lights operational test M X X FOT

33-004 33-20-00 Passenger compartment lighting test O X X FOT

33-005 33-24-00 Passenger signs operational test O X X FOT

33-006 33-25-03 Call lights operational test O X X FOT

33-007 33-26-00 Lavatory lights O X X LOC

33-008 33-27-00 Galley lights O X X LOC

33-009 33-28-00 Passenger reading lights M X X LOC

33-010 33-28-00 Passenger reading lights M X X RIA

33-011 33-31-00 Cargo and service compartment lights O X X LOC

33-012 33-40-00 Exterior lighting O X X LOC

33-014 33-42-01 Fixed landing lamp replacement M X X RIA

33-013 33-42-02 Retractable landing lamp replacement M X X RIA

33-015 33-50-00 Emergency lighting test M X X FOT

33-016 / Lights MEL maintenance procedures M X X MEL

REMARKS :




B1/B2





ATA 34 - Navigation

34-001 34-00-00 Navigation controls and indicators in the cockpit M X X TVC

34-002 34-13-01 Standby altimeter and airspeed indicators M X X FOT

34-003 34-16-01 Mach airspeed warning system O X X FOT

34-004 34-21-00 ADIRU component location O X X LOC

34-005 34-21-00 ADIRU CDU, bite test O X X FOT

34-006 34-24-00 Standby horizon system operational test O X X FOT

34-007 34-31-00 ILS receivers bite test O X X FOT

34-008 34-31-21 ILS glide slope antenna O X X LOC

34-009 34-31-42 VOR test O X X FOT

34-010 34-31-42 Multimode receiver bite test O X X TPR

34-011 34-33-11 Radio alti bite test O X X TPR

34-012 34-32-00 Marker Beacon system components O X X LOC

34-013 34-43-00 Weather Radar system components location O X X LOC

34-014 34-43-00 FOT from weather radar control panel O X X FOT

34-015 34-46-00 Enhanced Ground Proximity Warning System components location O X X LOC

34-016 34-46-00 EGPWS bite test O X X TPR

34-017 34-45-00 TCAS system component location O X X LOC

34-018 34-45-00 TCAS computer bite test O X X TPR

34-019 34-53-00 ATC SYSTEM component location O X X LOC

34-020 34-55-00 DME system component location O X X LOC

34-021 34-57-00 ADF system component location O X X LOC

34-022 34-58-00 GPS components location O X X LOC

34-023 34-58-00 GPS bite test O X X TPR

34-024 34-61-00 Flight Management Computer system O X X LOC

34-025 34-61-00 FMCS database loading O X X TPR

34-026 34-62-41 FMCS bite test O X X TPR

34-027 / Navigation MEL maintenance procedures M X X MEL




B1/B2


REMARKS :




B1/B2





ATA 35 - Oxygen

35-001 35-00-00 Oxygen systems controls and indicators in the cockpit M X TVC

35-002 35-00-00 Oxygen system pressure indication-check M X FOT

35-003 35-12-00 Flight crew oxygen system components location O X LOC

35-004 35-12-00 Flight crew mask/regulator in the stowed condition test O X FOT

35-005 35-12-21 Replace oxygen bottle transducer O X RIA

35-006 35-22-00 Passenger oxygen system components location O X LOC

35-007 35-22-00 Portable oxygen equipment O X TVC

35-008 35-22-11 Inspection of passenger oxygen generator for firing mech and heat sensitive band O X TVC

35-009 / Oxygen MEL maintenance procedures M X MEL

REMARKS :




B1/B2





ATA 36 - Pneumatic

36-001 36-00-00 Pneumatic system controls and indicators in the cockpit M X TVC

36-001 36-05-00 Pneumatic system components O X LOC

36-002 36-11-05 Engine bleed air distribution O X LOC

36-003 36-11-05 Bleed air control system operational test with APU O X FOT

36-004 36-11-05 Wing to Body overheat operational test O X FOT

36-005 36-11-35 Replacement of 5th stage check valve O X RIA

36-006 36-11-85 High stage valve O X LOC

36-007 36-12-00 Bleed air precooler system test M X FOT

36-008 36-14-00 APU bleed air system test O X LOC

36-009 36-21-05 Engine bleed pressure indicating system O X TPR

36-010 36-21-11 Duct pressure transmitter O X SGH

36-011 / Pneumatic MEL maintenance procedures M X MEL

REMARKS :




B1/B2





ATA 38 – Water and waste

38-001 38-00-00 Water and waste components M X LOC

38-002 38-00-00 Potable water system O X TVC

38-003 38-11-00 Waste water system O X TVC

38-004 38-32-00 Toilet system maintenance practices O X TPR

38-005 38-33-01 Water tank point level sensor replacement M X RIA

38-006 38-41-00 Water tank pressurization system O X FOT

38-007 / Water and waste MEL maintenance procedures M X MEL

REMARKS :




B1/B2





ATA 49 - APU

49-001 49-00-00 APU controls and indicators in the cockpit M X X TVC

49-002 49-00-00 APU troubleshooting procedures O X X TPR

49-003 49-11-00 APU maintenance practices O X X TPR

49-004 49-11-00 APU power plant bite test M X X FOT

49-005 49.15-00 APU air inlet M X X FOT

49-006 49-16-11 APU shroud drains O X X SGH

49-007 49-31-00 APU fuel system test O X X LOC

49-008 49-41-51 APU ignitor plug replacement M X X RIA

49-009 49-51-21 Cooling air shutoff valve O X X FOT

49-010 49-52-61 APU surge bleed air valve O X X FOT

49-011 49-61-00 APU CDU bite test O X X TPR

49-012 49-71-00 Exhaust gas temperature indicating system M X X FOT

49-013 49-71-21 APU EGT temperature probes M X X FOT

49-014 49-91-31 APU oil pump O X X FOT

49-015 / APU MEL maintenance procedures M X X MEL

REMARKS :




B1/B2





ATA 52 - Doors

52-001 52-00-00 Doors indications in the cockpit M X TVC

52-002 52-11-00 Forward entry door open/close operations M X FOT

52-003 52-20-00 Emergency exits M X LOC

52-004 52-21-00 Emergency exit hatch open/close operations M X TPR

52-005 52-31-00 Cargo compartment doors open/close operations O X FOT

52-006 52-48-11 Air conditioning access doors open/close operations O X FOT

52-007 52-48-21 APU access door open/close operations M X FOT

52-008 52-48-41 Electronic equipment compartment external access door open/close operations M X FOT

52-009 52-49-00 Miscellaneous exterior service doors O X LOC

52-010 52-51-12 Control cabin door: operational test door lock O X FOT

52-011 52-61-00 Forward AIRSTAIR and door operational test M X FOT

52-012 52-71-00 Door warning system test O X FOT

52-013 / Doors MEL maintenance procedures M X MEL

REMARKS :




B1/B2





ATA 56 - Windows

56-001 56-10-00 Flight compartment Windows M X TVC

56-002 56-12-00 Operation of cockpit sliding windows O X FOT

56-003 56-12-00 Cabin sliding windows Emergency exit release mechanism O X TVC

56-004 56-21-11 Passengers cabin windows O X SGH

56-005 56-22-00 Emergency exit hatch windows O X SGH

56-006 56-30-00 Door mounted windows O X TVC

56-007 56-41-00 Viewers and observation windows O X TVC

56-008 / Windows MEL maintenance procedures M X MEL

REMARKS :




B1/B2





ATA 71 to 80 - Engine

71-001 71-00-00 Power Plant components Precaution /Engine ground safety M X LOC

71-002 71-11-00 Engine cowling M X LOC

71-003 71-11-02 Fan cowl panels: opening and closing M X X SGH

71-004 71-71-00 Engine vents and drains O X LOC

72-001 72-00-00 Engine M X LOC

72-002 72-21-02 Fan blade replacement O X RIA

73-001 73-11-00 Fuel distribution system M X LOC

73-002 73-21-00 Fuel control system, system test M X FOT

73-003 73-31-00 Fuel flow indicating O X X LOC

73-004 73-34-00 Fuel filter bypass warning system O X LOC

74-001 74-00-00 Ignition system location O X LOC

74-002 74-31-00 Engine ignition control O X LOC

75-001 75-00-00 Air O X LOC

77-001 77-00-00 Engine indicating system O X X LOC

77-002 77-21-00 Exhaust gas temperature (EGT) O X LOC

77-003 77-21-00 Airborne vibration monitoring O X LOC

78-001 78-00-00 Thrust reverser deactivation and activation for flight dispatch M X MEL

78-002 78-31-00 Thrust reverser deactivation /activation for ground maintenance M X SGH

78-003 78-31-00 Open/ close the fan duct cowl Thrust reverser (manual procedure) M X SGH

78-004 78-31-00 Thrust reverser sleeve translation (manual procedure ) M X SGH

78-005 78-36-00 Thrust reverser indicating system M X LOC

79-001 79-21-05 OIL :Inspection –check // Magnetic chip detector M X LOC

79-002 79-21-05 Engine oil chip detector inspection remove and refit O X RIA

79-003 79-31-00 Oil quantity indicating system M X LOC

79-004 79-31-00 Oil quantity indicating system Operational test M X FOT

79-005 79-32-00 Oil pressure indicating system M X LOC

79-006 79-33-00 Low oil pressure indicating system M X LOC

79-007 79-35-00 Oil filter bypass warning system M X FOT

80-001 80-11-00 Engine starting system M X LOC




B1/B2


Item ref. ATA Subject Class X B2 Task



80-002 80-11-00 Opening for start valve manual operative drive M X SGH

71 to 80 / Engine MEL maintenance procedures M X MEL

REMARKS :




B1/B2


ADDITIONAL PRACTICAL EXPERIENCE

ATA reference Work experience Date Trainee’s signature





B1/B2








B1/B2








B1/B2


REMARKS :

Documents

B737-3/4/5 CFM56 MAINTENANCE PRACTICE TRAINING MANUAL B1 ... de formation... · B737-3/4/5 CFM56 Maintenance Practice Training Manual ... Maintenance Practice Training Manual B1/B2