Upload
reynhard-mahadi
View
15
Download
5
Embed Size (px)
Citation preview
Create affordable and seamless path to high performance Ethernet WAN and wireless 4G mobile backhaul services
The HFR HA-821 is cost effective, multiservice, carrier-grade ETSI 300 rack
mount complaint unit designed to provide Backhaul L2 switching capabilities
in 10G Ethernet Metro Core rings.
In small form factor and low power architecture the unit is ready to be
installed in customer premises to solve space and power challenges, deliver
high performance scalable services and reduce operational costs.
Standards-Based Multiservice Delivery
Designed to support Metro Ethernet Forum industry standards, HA-821
delivers Ethernet Private Line, Ethernet Virtual Private Line , Ethernet LAN,
Ethernet Access and Ethernet tree based connectivity in P2P, P2MP, Ring
topologies for high capacity business and mobile backhaul 4G services.
Service Level Provisioning, Monitoring and Management
Graphical user interfaces based upon SNMP supported by in band or out of
band interface options, are available to provide users a full solutions
management view from the individual node to an end-to end network and
service centric view. With dedicated hardware for traffic performance
monitoring, the HA-821 delivers on today’s requirement for hardware based
Y.1731 latency, jitter and frame loss ratio measurements. Tiered Ethernet
services as well as wireless backhaul service level performance may
also be monitored through the web-based SLA portal.
HFR HA-821 PRODUCT OVERVIEW
Flexible and Reliable Carrier Ethernet Service
HA-821 Ethernet Service Aggregation
HA-821 provides G.8032v2 ring adaptation and aggregation for mobile
network operators in tight urban area BST, eNodeB population either as
Ethernet services demarcation, classification, traffic management ,
prioritization, synchronization and service inter-working in up to 64Gbps
Switching fabrics.
»» Compact and low power unit, ready for CPE deployment, delivers
high performance and reduces operational cost
»» Ethernet services aggregation & transport in 10G Metro core rings
»» Standard-based MEF Carrier Ethernet 2.0 Compliance
»» Synchronization source derived from SyncE Ethernet interfaces or
1588v2 PTP BC, OC and TC
»» System clock meets the accuracy, stability, and holdover
specifications required for Stratum 3 Timing (G.813)
»» Carrier grade platform with low latency, and highly reliable service
delivery with sub-50ms Ethernet Ring Protection G.8032v2
»» Deep fault and performance management with Y.1731, Embedded
RFC2544, Y.1564 SAT and CIR/EIR utilization per EVC/UNI for the
Customer SLA Portal access
MetroBackbone
Wireless carrier 1,2,3
HA-805 Ethernet
BackHaul Provider
Wireless Carrier 3
HA-822
HA-822
Cell 3/4GG
BBU Hotel
BBU Hotel Wireless Carrier 1
Wireless Carrier 2
MNO BackHaul
ISP Metrocore
Meshrings
HA-821
HA-821 HA-821
HA-821
Femto Cells chain
Mesh ringsLocal In-building Access
Wi-Fi access
MSC/BSC/RNC
MSC/BSC/RNC
HA-822
HA-821 SYSTEM SPECIFICATIONBase System Hardware • Ethernet Interface: 4 x 10GbE SFP+ ports + 24 x 1GbE SFP ports• Front LEDs : Alarms - Red : Critical, Major and Minor, RUN - Blue, Ports - Green : Link/Activity, Yellow: Speed• Power Supply connectors: Terminal block for -48VDC or AC : 90VAC ~ 264VAC 47Hz to 63Hz• Serial Port (RJ45 / RS-232c) & Local LAN port (10/100/1000Mbps, RJ45) • Clock: Sync In/Out - SMA connector, BITS In/Out - RJ48c• Fan: Field replacable
Synchronization• ITU-T G.8261 / G.8262 / G.8264 SyncE on all Interfaces• SyncE Status Message support• IEEE 1588v2 Boundary Clock(BC), Ordinary Clock(OC) and Transparent Clock(TC) • Internal Stratum-3 Clock with Holdover to meet ITU-T G.813 Ethernet Switching (64Gbps switching capacity)• MAC Address Table : 16K Entries• 4096 VLANs (802.1Q C-tagged) and Stacked VLANs (802.1ad S-tagged)• IEEE 802.1ad Provider Bridging (C-tag, S-tag)
Ethernet Services • MEF CE2.0 Compliant Carrier Ethernet E-LINE, E-LAN and E-Access
Tra�c Management• VLAN management (push/pop/swap) for C-tag and S-tag• Service Classification based on any fields combination of L2 to L4• MEF compliant policing (CIR/CBS/EIR/EBS) with trTCM and 8 CoS• support large CBS up to 32768KB to gurantee SLA performance levels on bursts of frames which exceed the CIR• MEF HBWF(Hierarchical Bandwdith Profile) support defied by MEF 23.1• Hierarchical QoS for 3-stage shaping and 2-stage schedling
Loopback Functionality• Station loopback supports with Layer 1 , Layer 2(MAC swap) , Layer 3 (IP Swap) and Layer 4 (TCP/UDP Port Swap) per port and EVC• Station Loopback reacts to in-band loopback requests sent from test-sets like EXFO and other test equipments• IEEE 802.3ah and Y.1731 LBM OAM loopback command• Latching loopback for the in-band automatic loopback request defined by MEF standard (Future)
Ethernet OAM Functionaity• IEEE 802.3ah EFM OAM Link Management including Dying Gasp message for power failure alarm• IEEE 802.1ag Connectivity Fault Management (CFM) with 1,000 concurrent CFM sessions• ITU-T Y.1731 Fault Management (FM) and Performance Monitoring (PM)• support highly accurate One-Way Delay Measurement using 1588v2 PTP • Embedded RFC2544 Test Generator and Analyzer (Throughput , Latency, Frame Loss and Back-to-Back) with automatic report generation• TWAMP(Two Way Active Measurement Protocol)-Light Reflector based on RFC5357• MEF 30.1 FM and MEF 35 PM for other vendors interoperability (Future)• Y.1564 Servce Activation Testing using Y.1731 LBM/LBR up to 4 sessions
Ethernet Protection• ITU-T G.8032v1 and G8032v2(2010) Ethernet Ring Protection Switching with sub-50ms Protection Switching Performance • Link Protection with LACP as well as Static LAG using Active/Standby
Performance Monitoring Service for SLA Metrics
• Ethernet SLA PMs - 24hr, 15min, 5min 1min bins for SLA PMs - Y.1731 Frame Delay , Frame Delay Variation & Frame loss - Y.1564 Multi Service Activation test
• Ethernet Services PMs - 24hr, 15min, 5min bins - Bytes counters declared Red, Yellow and Green per EVC - Packets counters Received, Transmitted and Dropped per EVC - Service Utilization per CIR
• Ethernet Port PMs - 24hr and 15min bins for Port PMs - Rx, Tx and Error Statistics - Input and Output Utilization per Port
• User-defined Threshold settings and Threshold-Crossings Alerts (TCAs) for Delay , Delay Variation and Frame Loss
Security
• Telnet with SSHv2• Remote Authentication via RADIUS• Access Control List (ACL)• IEEE 802.1x Port Authentication• SNMPv3 with authentication and encryption (Future)
Management
• SNMPv1/v2c Get & Set• Serial Port (RJ45) using CLI• Out-of-Band Management (Local LAN Port) via Telnet and SNMP• In-band Management using management VLAN• FTP, secureFTP, TFTP• DHCP client with Option 82
Standard Compliance • IEEE 802.1Q, 802.1ag, 802.1ad(LLDP) and 802.1x, 802.3ah and 802.3ad(LACP)• ITU-T Y.1731, G.8032v1/v2, G.8261/8262/8264• MEF 6.1, 9, 10.2, 11, 14, 20, 22.1, 23.1, 25, 26.1, 30, 33 and 35• IEFT RFC2544, RFC5357, RFC2863(IF-MIB) , RFC3418(MIB for SNMP) , RFC4188(Bridge) , RFC2922 (Physical Topology)
Physical Characteristics• Dimensions: 44mm x 440mm x 240mm (H x W x D)
• Weight: 2.4Kg
• Operating Temperature: -40°C to +65°C
• Storage Temperature: -40°C to +70°C (GR-63-CORE)
• Humidity: Up to 85% non-condensing
• Power Supply:
- -48DC Two Redundant Hot Swappable DC ( –40 to –60 VDC) or
- 220VAC One Swappable AC(90 to 264 VAC)
• Power Consumption: Typical 50Watts/ Maximum 67Watts
Regulatory• FCC Part 15 Class A• EN 55022, EN 55024 Class A• CSA• UL 60950-1, IEC 60950-1, EN 60950-1, EN 61000 • NEBS Level 3 compliance• GR-63-CORE Issue 3• GR-1089-CORE Issue 5• CE Mark
Compliance• ETSI 300 019 Class 1-1, Class 2-3, Class3-1• RoHS 5/6: Compliance with Directive 2002/95/EC