B1-LED-Pico - ProjectorCentralThe B1-LED-Pico projector is designed for use with notebook computers that can connect to an external VGA display device. Standard desktop PC’s will

Micro SD

B1-LED-Pico

User Guide

ContentsChapter 1 Introduction and Notices Introduction

Safety PrecautionsMaintenance and ServiceFCC NoticesEuropean Notices

Chapter 2 Projector Overview Features

AccessoriesMain Unit OverviewRemote Control Overview

Connecting your projector to a video sourceConnecting your projector to your PC

USB and Micro SD card usage overview

Chapter 3 Using your Projector Setting up your projector

Adjusting the Image Size and Focus

A/V and VGA menu Overview

Chapter 4 PMP Functions Viewing Photos

Slideshow ModeThumbnail ModeBrowse ModePlaying Movies and Music

PMP settingsSystem SetupPhoto SetupVideo SetupMusic Setup

445667

889101112131415

161617

18

2020202122

24

2526262727

Chapter 5 Technical Specifications 28

4

CHAPTER 1 Introduction and Notices

Thank you for purchasing the FAVI B1-LED-Pico projector. This projector is a small, lightweight, versitile unit designed for both business and home use.

This projector boasts a 28 lumen light output, built in speakers, SVGA native resolution, VGA support up to 1600x1200, Composite video support, and an integrated Personal Media Player (PMP). It’s small, operates quietly, and comes with everything you need to get started.

Only 24 watts of power consumption means that this projector can be used just about anywhere. It can project a clear image from as little as 5 inches, to over 60 inches.

and lamps. The integrated LED lamp is rated to last for up to 20,000 hours.

The integrated Personal Media Player allows this projector to function as a media player, an image viewer, and a slide show viewer. You can even view a

Being designed with portability and business use in mind, the B1-LED-Pico comes with everything a travelling business person would require, including international power plug adapters for use in foreign countries.

5

Safety Precautions

Do not us e the projector under direct s unlight.

Please avoid looking directly into the projector’s lens while the unit is operating. Doing so could damage your eyes.

Do not use this projector near sources of heat, such as space heaters,

Do not block any ventilation holes on this device.

Using a tripod with your projector is strongly recommended. A tripod will allow for better ventilation and heat dissipation.

Do not allow liquids to come into contact with this projector. If the projector is exposed to liquids, the internal electronics may be damaged.

This projector should not be used at tempatures above 104°F or below 40°F. Relative humidity should be less then 80%

This projector should not be used in a dusty location. Large amounts of dust may hinder the projector’s ventilation, causing it to overheat.

Please avoid dropping, hitting or throwing this projector.

Please make sure your projector is placed on a steady surface prior to operating it.

Please do not operate the projector at a high volume for an extended

to the projector’s audio output jack for situations where a high volume is needed.

Upon powering down, the projector’s cooling fan will continue to spinfor up to 30 seconds. Please do not unplug the projector until afterthe cooling fan stops spinning.

6

Keeping your projector clean will help prolong its life. If the projectorbecomes dirty, wipe it clean using a dry or damp cloth. Please unplug theprojector before cleaning it. Do not use harsh chemicals to clean your projector.

Please handle your projector carefully. Handling the unit carelessly maycause physical damage to it. Physical damage is not covered under your projector’s warranty.

Please use only the accessories and cables that come with your projector.Using other accessories may cause damage to your projector and will void your warranty.

Do not attempt to disassemble your projector. There are no user serviceable parts inside. If your projector requires service, pleasecontact us.

This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.

This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the manufacturer's instruction manual, may cause interference with radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television

and on, you are encouraged to try to correct the interference by one or more of the following measures:

Maintenance and Service

FCC Notices

7

Disposal of Used Electrical and Electronic Equipment

( Independent collection programs applicable to E U-member s tates and other E uropean countries )

T he label s hown on this device or its package indi-cates that this device s hould not be dis carded along with other hous ehold was te; it mus t be collected and given to E E E dis pos al centers . B y ens uring this device

is dis pos ed of correctly, you will help prevent potential nega-tive impact on the environment and human health, which could otherwis e be caus ed by inappropriate handling of this device. C ollection of s uch devices helps cons erve natural res ources . T he label has the legal effect only in E U-member s tates .

C ontact your loca l agency or your dealer for more deta iled

information about dis pos ing of this device.

Reorient or relocate the receiving antenna.

Increase the separation between the equipment and the receiver.

receiver is connected.

Consult the dealer or an experienced radio/television technician for help.

European Union Notices

8

CHAPTER 2 Projector Overview

Features

Supports Divx and Xvid video codecs.

Supports MP3, WMA, and OGG audio formats.

Compact, versitile design.

Integrated Micro SD card slot. Supports Micro SD cards up to 32 GB.

28 lumen LED lamp output.

between the projector and a computer.

Supports viewing JPEG and Bitmap images.

Comes with international power plug adapters for use on foreign businesstrips.

Supports AVI, and MP4 video formats.

The B1-LED-Pico projector has been designed to be far more functionalthen previous pico projector models. Here is a summary of the features of your new pico projector.

9

Accessories

A. Projector B. Mini Y Cable

C. Mini USB Cable D. DC 12V / 2A Charger

E. Remote Control F. Tripod

G. Leather Case H. User Guide

The following accessories come with your projector:

10

Main Unit Overview1. F ocus control

2. Go back to previous menu(PMP mode)

3.

4. Fast forward/Highlight menuoption (PMP mode)

5.

6. Select mode button (all modes)

7. IR Sensor

8. AV/VGA cable input

9. 12 volt DC input

10. P ower button

11. Micro S D s lot

12. Decrease volume (all modes)

13. Increase volume (all modes)

14. Mini US B connector

15. Audio out jack

M

S

1

2

345

6

PowerMicro

SD

10

12

11

13

7 8 9

IRAV / VGA DC

USB Audio

14

15

Play/Pause/Select option (PMP mode)

Rewind/Highlight menuoption (PMP mode)

11

Remote Control OverviewYour projector’s remote control can operate all of your projector’s functions.Some of the buttons on both the projector and the remote control are multifunctional depending on how you are using the projector. PMP mode buttonfunctions are explained more thoroughly in chapter 4.

1. P ower 2. Brightness presets (All modes)3. Select PMP mode4. Select A/V mode5. Select VGA mode6. Menu (AV/VGA modes)7. E xit Menu (AV/VGA modes)8. 9. 10. Menu navigation (AV/VGA modes)11. 12. Select Menu option (AV/VGA modes)13.14.

15. View Photos (PMP mode)16. View Videos (PMP mode)17. View photo slideshow (PMP mode)18. V ideo P layback button19. Move Upward button20. V ideo P aus e button21. Rewind/Move leftward (PMP mode)22. Select highlighted option (PMP mode)23. Fast forward/Move rightward

(PMP mode)

24. E xit the current menu

25. Move Downward button

26 . Mute button (PMP mode)

27. Decrease volume (All modes)28. Increase volume (All modes)29. Zoom in on a photo (PMP mode)

30. Zoom out of a photo (PMP mode)3

1. Rotate photo clockwise (PMP mode)

32. Rotate photo counter-clockwise(PMP mode)

Menu navigation (AV/VGA modes)



154

23

76

10

11

1416

1519

1821

2224

25

27

89

1213

1729

2030

3123

3226

28

12

Powering your projector On and Off

Powering On

Press the power button on either the projectoror remote control.After a second, the projector will startoperating.

Powering Off

Pressing the powerbutton on either theremote or projectorwhile its operating willbring up this menu screen. Press the powerbutton again to power

accidentally pressed thepower button, wait a few seconds for thisscreen to disappear.

After powering down the projector, the projector’s cooling fan willcontinue to spin for up to 30 seconds. Please do not unplug yourprojector until after the cooling fan shuts down.

POWER OFF SYSTEM

NO YES

13

AudioIR

DC

AV / VGA

Connecting your projector to a video source

◄ DVD Audio

IR

DC

AV / VGA

Mobile Device

Your projector supports both Composite video with line audio, and standard VGA video. A special Y cable is included that will allow you to connect either video source to your projector. When plugging the cable into your projector, make sure the arrow on the connector is facing upward to help prevent plugging in the connector upside

grasping the sides of the connector and gently pulling it out.

To connect a composite video device such as a DVD player to your projector, connect the Y cable tothe projector as shown in the illustration. Switch the projector to A/V mode and connect the DVD player’s A/V cable to the color coded RCA jacks on the Y cable.

Along with DVD players and other video equipment, your projector is also compatible with any mobile device that can output Composite video. To use a mobile device with your projector, connect it following the above instructions. You may also

device to output composite video.

14

Your projector supports standard PC VGA in resolutions from 640x480up to 1600x1200. The B1-LED-Pico projector is designed for use withnotebook computers that can connect to an external VGA display device.Standard desktop PC’s will also work with the B1-LED-Pico projector.

Connecting your projector to your PC

Recommended VGA resolutions:

640x480, 800x600, 1024x768

Supported VGA resolutions:

640x480, 800x600, 1024x768, 1280x768, 1280x800, 1280x960, 1280x1024, 1600x900, 1600x1024, 1600x1200

All supported VGA resolutions are displayed in the 4:3 aspect ratio.Your projector supports a 60 Hz refresh rate. Higher refresh rates arenot supported.

◄

PC

AudioIR

DC

AV / VGA

power on the projector and switch it to VGA mode. Next, connect the Y cable to the back of the projector, and to the computer as shown in the illustration. Your computer should automatically detect the projector as a VGA display upon powering up.

If you are using a notebook computer and your projector is not automatically detected, you may need to manually switch your computer’s video output to the external VGA port.

15

Your projector comes with internal memory that can be accessed by using the included USB cable to connectit to any computer that supports the USB 2.0 standard.

Once the projector is connected to the computerand powered on, the computer should detect the projector as a standard USB mass storage device. You can also connect the projector’s

When the projector is connectedto a computer via the USBconnection, it will project thisscreen. To return to PMP mode,simply unplug the USB cable.

Along with its internal memory, your projector alsosupports Micro SD cards in sizes up to 32 GB. When a Micro SD card is inserted, it will be detected automatically.Micro SD cards are givenaccess priority over the projector’s internal memory.

USBAudio

PC / Notebook

USB and Micro SD card usage overview

Micro SDCard

16

Setting up your projectorScrew the tripod to thebase of the projector asshown in the illustration. Grasp the tripod’s legs to tighten. Do not over tighten.

You can adjust the tripod’s base to make better contact with the base ofthe projector. Rotate thebase on the tripod to adjust it.

You can also extend the tripod’s legs to increase the height of yourprojector. The tripod’s legs are keyed. When they are fully extended, you can rotate the inner legs to prevent them from accidentally retracting while

the inner legs with the notches on the outer legs to allow the inner legs toretract.

Once you have the projector set up and connected, press the power buttonon either the projector or remote control. Once the projector begins operating, you should be able to hear the cooling fan and see an imageprojected onto your screen. You can then adjust the projected image to your liking.

IR

DC

AV / VGA

Adjustable base

CHAPTER 3 Using your Projector

17

Adjusting the Image Size and Focus Once the projector is connected and powered on,you can adjust the image

screen.

To adjust the focus, move the focus control slider which is shown in the illustration until the image is clear.

7.9 5.0

19.7 12.5

31.5 20.0

39.4 25.0

59.1 37.6

78.7 50.1

98.4 62.6

103.8 66.0

Distance from projector to screen

Image Size

All distances are measured in inches.

The projector’s image size can be adjusted by moving the projector. Thecloser the projector is to the screen, the smaller the image size will be. The farther the projector is from the screen, the larger image size will be.Below is a listing of image sizes and the distances needed to obtain that image size.

18

While in either A/V or VGA mode, press the MENU button on your remote control to bring up the menu screen.

A/V and VGA Menu Overview

There are two sub-menus available in this menu screen. Use the navigation arrow buttons on the remote control to select which sub-menu you want, then press the OK button on your remote control to select that sub-menu.

C ontras t R ange: 0~100 (Default s etting: 50)

B rightnes s R ange: 0~100 (Default s etting: 50)

S aturation R ange: 0~100 (Default s etting: 50)

Tint R ange: 0~100 (Default s etting: 50)

C olor temperatureOptions : High / Medium / Low

( Default s etting: Medium )

Here is a list of the display settings that you can adjust. Please note that some settings may not be available in VGA mode. This menu screen is also not available in PMP mode.

Recall Resets all display settings to their default

19

This menu screen allows you to adjust the settings for the on screen

how the menu screen looks and behaves.

LanguageSelect between English and Chineselanguage menu screens.

Select where the menu screen will appear.Choices are Middle, Top left, Bottom left, Top right, and Bottom right

Transparency

Select the amount of transparency the menu screen will have. The range is from 0 to 5. The higher the value, the moretransparent the menu screen will be.

OSD timeoutSelect how long the menu screen will be displayed before automatically closing.Choices are 15, 30, and 60 seconds.

OSD location

Here is a list of the settings you can adjust on this menu screen. These settings can be adjusted in either AV or VGA mode.

20

When entering PMP mode,the projector will displaythe PMP menu screen asseen in this illustration:

You can navigate throughthe PMP menu screenusing either the projector’sremote control, or thebuttons on the projectoritself.

The following buttons on your projector and remote control are used for navigating through the PMP menu screens.

After 10 seconds of inactivity, the projector will enter slideshow mode

Micro SD card that has been inserted into the projector.

Viewing PhotosThere are three modes for viewing photos, Slideshow mode, Thumbnail mode, and Browse mode. You can select between these modes in the PMP Photo settings menu. (Please see pages 25 and 26)

In this mode, photos will be displayed one by one in a continuousslide show. In the Photo Setup screen, you can change the slideshow

Buttons on the Projector Function Description Buttons on the Remote

Control

Go back to the previous menu screen.

Move Leftward.

Enter button. Press to select the option you have highlighted.

CHAPTER 4 PMP Functions

Move Rightward.

projector will automatyically play them during the slideshow.

21

Slideshow mode function buttons.

Up to 12 photos at a time can be displayed as thumbnails in Thumbnail

the right side of the screen. Highlight a photo and select it to view that photo in Browse mode.


Control

Enter Thumbnail mode.

Go back to previous image.

Skip to next image.

View photo in Browse mode.

Thumbnail Mode

22

Thumbnail mode function buttons.

PMP settings menu. (Please see Page 25)

Full Screen modeDisplay’s photos in full screen. Thephoto’s aspect ratio will be set to

Fit Screen modeDisplay’s photos in their correct aspect ratio.

Crop to fill mode


Control

Move leftward.

Move rightward.

Move upward.

Move downward.

View highlighted photo in Browse mode.

Go back to the main menu screen.

Browse Mode

23

While in browse mode, you can zoom in on the current photo you are viewing. While zoomed in, you can also scroll through the photo.


Control


Move Leftward.

Move rightward.

Rotate the photo 90 degreescounter-clockwise.

Rotate the photo 90 degreesclockwise.


Control

Scroll leftward.

Zoom in 25%

Scroll rightward.

Scroll upward.

Scroll downward.

Zoom out 25%

Zoom out to original size. Press againto exit browse mode.

Browse mode function buttons.

24

Playing Moviesand Music

From the main PMP menuscreen, highlight either theMUSIC or VIDEO optiondepending on what you wantto play. Any compatible video

onto a Micro SD card, or the projector’s internal memory will be listed as shown here.

the Remote ntrol


Rewind.

Fast forward.

Decrease volume.

Increase volume.

The music player screen looks similar to the video player screen shown above. It functions the same as the video player screen does.

Both the music and video player can be controlled by the buttons that are listed below.

rewind.

fast forward.


Control

25

PMP SettingsHere you can adjust thesettings for your projector’sSystem, Photo, Video, andMusic functions. Listed below are the buttons thatwill highlight and changethese settings. Each settingand its description are listed on the following twopages.


Control

Go back to the previous menu screen.

Move upward.

Move downward.

Change a setting.

Press and hold to change a setting.

Enter sub menu.

Change a setting.

Press and hold to change a setting.

26

System Setup

The System Setup screen allows you to change the general PMPsystem functions such as Language, Gamma correction, and Volume.

Photo SetupHere you can change how photos will be displayed on the projector.

Menu Option Function Description

Language Select from one of 19 supported languages. Englishis the default setting.

Volume Change the default PMP mode volume.

R es et Default S etting Reverts all PMP settings back to their factory defaults.

Vers ionprojector is running.

S ystem Upgrade

Gamma Change the brightness of the PMP interface by selecting from one of four settings.


Dis play ModeSelect which mode photos will be displayed in. Youcan choose between Slideshow, Thumbnail, andBrowse mode.

Dis play RatioSelect how photos will be displayed. You canchoose between Full Screen, Fit Screen, and Cropto �ll modes.

Slides how Duration

Select how long each photo will be displayed inSlideshow mode. You can choose between 5 seconds, 15 seconds, 30 seconds, 60 seconds, 5minutes, and 15 minutes. Default is 5 seconds.

Slides how RepeatSelect whether you want the slideshow to cyclethrough the images once, or repeat them. Thedefault stting is Once.

27

Slides how Effect

P hotoFrom

Select whether you want to display photos fromall directories, or just the current directory that theprojector is reading photos from. Default setting is all directories.

Music Setup


P lay Mode in music mode. You can choose between Once,Repeat one, Repeat, and Random.

Mus ic E ffect Select equalizer presets. The available presets areNormal, Rock, Pop, Classic, Soft, Jazz, and DBB.

S how S pectrum Displays a graphical spectrum in music mode.

Auto P lay If set to on, music will automatically begin playing upon entering music mode.

Video Setup


Dis play R atioSelect how you want videos to be displayed. Youcan choose between Full Screen and Original size.

P lay Mode

in video mode. You can choose between Once,Repeat, and Random.

Here you can change how videos will play on the projector.

28

CHAPTER 5 Technical Specifications

LCD

LCD native resolution 800x600640x480 up to 1600x1200Supported resolutions

Video inputs Composite video, and VGA

Audio inputs Stereo line input jacksLED lamp power 12 watts

LED lamp life 20,000 hours

Projected image size 5 to 80 inches

Power consumption 24 wattsExternal power supply 12 V DC 2.0 Amps

Operating temperature 40ºF~104ºFOperating humidity 10~80%

Size

Weight

5x3x1 inches

8 ounces

LCOS

AVI, MP4, MP3 WMA, OGG, BMP, JPGSupported video codecs Xvid, Divx

Supported audio codecs ADPCM, MP3, WMA, OGG

Documents

B1-LED-Pico - ProjectorCentralThe B1-LED-Pico projector is designed for use with notebook computers that can connect to an external VGA display device. Standard desktop PC’s will