THECONCISE

LISTOF

ADDITIVES

ORIGINAL NO SMOKEBardahl’s No-Smoke stops oil burning and reduces exhaust smoke. No-Smoke lessens engine noise and restores compression, improving power and performance.The Number One selling product in its category in the USA.#2112 Original No-SmokePacked 12 x 12 oz. bottles per case

Bardahl Asia Pacific Pte LtdAn ISO 9001-2008 company33 Ubi Ave 3 #07-51Vertex, Singapore 408868www.bardahl-ap.com

Bardahl Manufacturing Corporation1400 NW, 52nd StreetSeattle, WA 98107

COOLING SYSTEM PRODUCTS

RADIATOR ANTI-RUSTand WATER PUMP LUBEInhibits rust and corrosion, lubricates water pump, bearings, seals and reduces deposit formation in radiators.#8117 Radiator Anti-Rust and Water Pump LubePacked 6 x 16.9 oz. bottles per case

RADIATOR STOP-LEAKSeals small leaks in radiators, cylinder heads, gaskets and heaters.Bardahl’s Radiator Stop Leak and Conditioner mixes well with all types of rust inhibitors, anti-freezes and coolants.#8118 Radiator Stop-LeakPacked 6 x 16.9 oz. bottles per case

RADIATOR SUPER FLUSH

Removes rust and scale from radiators and water-jacket deposits.Bardahl’s Radiator Super Flush helps prevent overheating and is safe for aluminum engine blocks.#8119 Radiator Super FlushPacked 6 x 16.9 oz. bottles per case

CRANKCASE PRODUCTSPOWER BOOSTERConcentrated formula Power Booster reduces engine wear, restores lost power and increases engine efficiency. Power Booster contains “Polar Plus” (Triple Protection) formula, providing the ultimate lubrication – plus oil stabilizer that improves the strength and thickness of oil film at high temperatures. It fights friction in Gas & Diesel Engines. Power Booster is ideal for both trailer towing and heavy-duty vehicles. It can be added between oil changes and provides extra protection to engines using low sulfur diesel fuels.#1511-A Power BoosterPacked 12 x 11 oz. bottles per case

SPECIAL DUTYProvides the outstanding benefits of the World Famous Polar Attraction formula with its unique f r i c t i o n - r e d u c i n g protective film.It improves engine power and performance in new as well as older engines. It prevents the formation of sludge, gums and varnish on valves, cams and other

critical engine surfaces.Special Duty reduces oil consumption and increases oil pressure. It is developed for heavy equipment; taxis, trucks, tractors, marine vehicles and construction equipment. They run more efficiently and economicallywith Special Duty.#1532 Special DutyPacked 24 x 32 oz. cans per case

ENGINE AND AUTOMATIC TRANSMISSION FLUSHING OIL

Formulated with light base oil to carry the special dispersant and detergent additives that actively clean and keep deposits in suspension to be drained from the engine or transmission. For the engine, it will remove sludge and varnish and helps free up sticky valves. For the transmission system, its chemical blend dissolves sludge and varnish. Helps free sticking transmission parts. Contains no harmful solvents that harm seals.#4030 Engine and Automatic Transmission Flushing OilPacked 12 x 16 oz. bottles per case

ENGINE TUNE-UP AND FLUSHA concentrated blend of solvents and cleaners. This product is added into the crankcase engine oil prior to an oil change.Modern motor oils are formulated with detergent/dispersant additives to control the formation of deposits. Extended oil drains and typical urban driving conditions often overwhelm the oil’s ability to prevent and control deposits. Stop-and-go driving, short trips cause an increase in varnish, gum and sludge deposits in an engine. Bardahl’s Engine Tune-up and Flush will remove existing gum, varnish and sludge deposits from engine parts. Its performance is demonstrated in field and laboratory testing.Bardahl’s Engine Tune-up and Flush is formulated to meet and exceed OEM specifications such as Mazda 1032, Fiat 60 769 499, Hyundai 4055-C and Daewoo ABAR1032#4018 Engine Tune-Up and FlushPacked 24 x 11 oz. cans per case

NO SMOKE + STOP LEAKBardahl No Smoke + Stop Leak is a “double-action” synthetic formula that stops oil burning, reduces exhaust smoke in addition the extra thick formula seals any spaces between the valves, guides, piston rings and cylinder walls. A seal swell agent restores pliability of the seals, which stops any oil leaks, in addition it reduces friction, cushions worn bearings, quiets noisy lifters, improves compression and maintains efficient lubrication to improve operation of the vehicle.#2117 No-Smoke plus Stop LeakPacked 12 x 16 oz. bottles per case

B1 ENGINE TREATMENT & B2 OIL SUPPLEMENTBardahl B1 Engine Treatment and B2 Oil Supplement contains “Polar Plus” (Triple Protection) formula. Bardahl’s “Polar Plus” (Triple Protection) formula clings to metal, forming a strong molecular film.B1 Engine Treatment is formulated for maintaining new car performance and increases mileage by reducing engine friction and wear. B1 Engine Treatment helps prevent varnish and sludge from forming on valves and lifters.#1020 B1 Engine TreatmentPacked 24 x 350ml bottles per case

Bardahl B2 Oil Supplement is formulated for older engines. Reduces oil burning and blowby. Restores compression and power.#2120 B2 Oil SupplementPacked 24 x 350ml bottles per case

FUEL SYSTEM PRODUCTS

Bardahl Diesel Fuel Conditioner with Cetane is a complete multi-functional diesel fuel additive that is formulated to turn regular diesel fuel into “premium” diesel fuel. DFC when used regularly at the recommended treat level will provide initial “clean-up” and long term “keep clean” performance in all types of diesel fuel injection systems. Diesel Fuel Conditioner when used on a regular basis cleans up all types of fuel injection systems, including the latest generation CRDI and keeps them clean to maximize power, performance and fuel economy.#3330 Ultra Concentrated Diesel Fuel Conditioner with CetanePacked 24 x 5 oz. bottles per case#3331 Ultra Concentrated Diesel Fuel Conditioner with CetanePacked 12 x 32 oz. bottles per case

ULTRA CONCENTRATED DFC with CETANE

Common Rail Direct Injection Cleaner provides ‘one tank’ clean-up to modern electronic common rail injection systems as well as older “legacy” mechanical injection systems. This rapid clean-up means complete restoration of lost power and performance in one tank of fuel. It is safe to use as often as needed and is compatible with all common diesel fuel system components and emission control devices (EGR, DPF, etc).#3314 Ultra Concentrated CRDI CleanerPacked 24 x 5 oz. bottles per case

ULTRA CONCENTRATED CRDI CLEANER

ULTRA CONCENTRATED COMPLETE FUEL SYSTEM CLEANER

The ultra concentrated formula rapidly and efficiently cleans the entire fuel system in only one tank of fuel. It removes not only injector and intake valve deposits but also cleans up combustion chamber deposits that are responsible for pre-ignition (knocking) and “run- on”. Removing combustion chamber deposits reduces the engines octane requirement (OR) and may allow the use of less expensive lower octane fuel. Removing injector and intake valve deposits eliminates the major cause of hard starting, rough idle, poor acceleration, reduced fuel economy and excessive exhaust emissions.Effective in all types of gasoline fuel injectors, it cleans up even the hard to remove deposits found in latest generation

gasoline direct injection (GDI/DIG) engines. The performance benefits of fuel injector, intake valve and combustion chamber cleaning have been shown to last up to 5,000 km. Use Bardahl Ultra Complete Fuel System Cleaner every 5,000 km to restore your vehicles power, performance and fuel economy.#5015 Ultra Concentrated Complete Fuel System CleanerPacked 24 x 5 oz. bottles per case

Injector and intake valve cleaner’s powerful ultra concentrated formula quickly and effectively removes deposits restoring lost power, performance and fuel economy in only one tank of fuel. This premium formulation contains over 4 times the amount of fuel system detergent present in typical competitive injector cleaners. Injector and intake valve cleaner is effective in all types of gasoline fuel injectors including the hard to remove deposits found in gasoline direct injection (GDI/DIG) engines. The performance benefits of injector and intake valve cleaning have been reported to last up to 5,000 km. Use Bardahl Ultra Concentrated Injector and Intake Valve Cleaner every 5,000 km to maximize your vehicle’s power, performance, and fuel economy.#5050 Ultra Concentrated Injector and Intake Valve CleanerPacked 24 x 5 oz. bottles per case

ULTRA CONCENTRATED INJECTOR & INTAKE VALVE CLEANER

ULTRA CONCENTRATED OCTANE BOOSTERUltra Concentrated Octane Booster offsets the effect of OR (Octane Requirement) in all vehicles. Octane Booster contains the most effective chemical octane booster currently available, methylcylcopentadienyl manganese tricarbonyl (MMT). MMT has been used for many years by refineries all over the world to raise the octane of their fuels. The use of Octane Booster is an efficient cost effective way to restore power, performance and fuel economy lost to inadequate fuel octane. Octane Booster increases the octane rating of any pump gasoline and in many cases may allow the use regular grade gasoline instead of premium. When used as directed Octane Booster will give a 2 – 3 octane unit increase in typical gasoline. Octane Booster when used as directed is safe for use in catalytic converter equipped vehicles. #3515 Ultra Concentrated Octane BoosterPacked 24 x 5 oz. bottles per case

STOP LEAk PRODUCTS

GEAR OIL ADDITIVE plus STOP LEAK

Bardahl’s Gear Oil Additive plus Stop Leak is a specially formulated additive for manual transmissions, gearboxes and differentials. It extends the life of gear oil. It also fortifies OEM additives with Bardahl’s Polar Attraction Formula, providing a protective film that reduces wear. Gear Oil Additive plus Stop Leak also has a seal conditioner to prevent and eliminate leaks.#3119 Gear Oil Additive plus Stop LeakPacked 24 x 8 oz. tubes per case

ENGINE STOP LEAKRestores and maintains the pliability of synthetic and natural rubber gaskets and seals, thus helping to eliminate oil leaks and prevent their recurrence.It is formulated to reduce or prevent oil loss due to seal shrinkage and will help free stuck rings, reduce valve deposits and help quiet lifters.#6015 Engine Stop LeakPacked 12 x 16 oz. bottles per case

TRANSMISSION STOP LEAKSpecially formulated transmission additive designed to stop leaks and condition seals in automatic transmissions.Bardahl’s Transmission Stop Leak also removes internal deposits and reduces fluid oxidation.#6018 Transmission Stop LeakPacked 12 x 16 oz. bottles per case

KIWAMI FUEL SYSTEM TREATMENT -POWER BOOSTING• Restores to new car performance• Restores fuel efficiency• Reduce emission• Cleans the injectors, intake valves and combustion

chambers of all engines including the hard-to-clean DGI (Direct Gasoline Injection) engines

Much of the power produced by the engine is lost due to internal friction. 43% of this power loss involves pistons and piston rings. KIWAMI Fuel System Treatment contains friction modifiers and upper cylinder lubricants which reduce friction in the upper cylinder area (This is an area that is very rarely adequately lubricated by the oil). Reducing this friction quickens throttle response – which improves both the acceleration and overall power/performance.#99420 Kiwami Fuel System Treatment - Power BoostingPacked 24 x 200 ml bottles per case

Benefits:• Ensures complete and rapid diesel particulate filter regeneration.• Extends lifespan of the diesel particulate filter, avoiding

expensive replacement.• Prevents increase in oil consumption and loss of power caused

by clogged DPF.• Most economical product to reduce soot without any

modifications to the fuel system. Directions for use:• One can of Bardahl DPF Regen+Clean treats 30 to 60 litres of

diesel fuel.• Pour content of DPF REGEN + CLEAN (250ml) into part full

fuel tank.• Fill up fuel tank (60 litres max).• Recommended use: 2 times per year or every 7000km of

mileage

Bardahl DPF Regen + Clean