B07 Miniature ported filter/regulator

05/18en 8.300.300.01

Our policy is one of continued research and development. We therefore reserve the right to amend, without notice, the specifications given in this document. (1997 - 8119d) © 2015 Norgren, Inc.

Technical data, standard models with relievingSymbol Port size Pressure

range (bar)Element(µm)

Flow *1)(dm3/s)

Drain Bowl Weight (kg)

Model

G1/8 0,3 ... 7 40 6,2 Manual Plastic 0,26 B07-101-M3KG

G1/4 0,3 ... 7 40 6,5 Manual Plastic 0,26 B07-201-M3KG

G1/8 0,3 ... 7 40 6,2 Automatic Plastic 0,26 B07-101-A3KG

G1/4 0,3 ... 7 40 6,5 Automatic Plastic 0,26 B07-201-A3KG

*1) Flow at inlet pressure 10 bar (145 psi), outlet pressure 6,3 bar ( 91 psi) and pressure drop 1 bar (14 psi)

B07-˙˙˙-˙˙˙˙Option selector

> Port size: G1/8 & G1/4

> Very compact unit

> High efficiency fluids and particle removal

Port size Substitute

1/8“ 1

1/4” 2

Bowl/Option Substitute

Plastic/relieving 01

Plastic/non-relieving 03

Metal/relieving 33

Metal/non-relieving 35

Metal/relieving 05 *2)

Metal/non-relieving 07 *2)

*1) Outlet pressure can be adjusted to pressures in excess of, and less than, those specified. Do not use these units to control pressures outside of the specified ranges.

*2) When specifying 10 bar (145 psi) unit, eg. B07-205-A3MG, also note correct code at 5th, 6th and 9th digits.

Thread Substitute

PTF A

ISO G G

Pressure range (bar) *1) Substitute

0,1 ... 0,7 A

0,3 ... 3,5 E

0,3 ... 7 K

0,3 ... 10 M *2)

Element (µm) Substitute

5 1

40 3

Drain Substitute

Automatic A

Manual M

Medium:Compressed air onlyMaximum inlet pressure:10 bar (145 psi) Transparent bowl 17 bar (246 psi) Metal bowlPressure range:0,3 ... 7 bar (4 ... 101 psi), 0,3 ... 3,5 bar (4 ... 50 psi), 0,1 ... 0,7 bar (1 ... 10 psi), 0,3 ... 10 bar (4 ... 145 psi)

Element:5 or 40 µmFlow:see belowPort sizes:G1/8 or G1/4 Rc1/8 (Gauge)Bowl:31 ml

Drain:Manual or automaticAmbient/Media temperature:Transparent bowl -34 ... +50°C (-29 ... +122°F) Metal bowl -34 ... +65°C (-29 ... +149°F) Air supply must be dry enough to avoid ice formation at temperatures below +2°C (+35°F)

Materials:Body: Zinc alloy Bonnet: Acetal Bowl: Plastic or zinc alloy Filter element: Sintered PESeals: NBR

Technical features

B07 Miniature ported filter/regulator

Our policy is one of continued research and development. We therefore reserve the right to amend, without notice, the specifications given in this document. (1997 - 8119d) © 2015 Norgren, Inc.en 8.300.300.02

05/18

bar

0 2 4 6 8 10 dm3/s

6

4

2

0

Flow

Pre

ssur

e d

rop

Flow characteristics Port size 1/4”, 40 µm Element, Pressure range 0,3 ... 7 bar

Inlet pressure 10 bar (145 psi)

Accessories Service kitManual drain Automatic drain

40 µm: B07-KITM40R B07-KITA40R

5 µm: B07-KITM05R B07-KITA05R

6

1

4

3

Wall mounting bracket and panel nut

1 2 3 4 5 6 7 8 9 10

11 12 13 14 15 16 17 18 19 20

20

30

21 22 23 24 25 26 27 28 29

31 32 33 34 35 36 37 38 39

& 1 2 3 4 5 6 7 8 9 10

11 12 13 14 15 16 17 18 19 20

20

30

21 22 23 24 25 26 27 28 29

31 32 33 34 35 36 37 38 39

Panel nut

1 2 3 4 5 6 7 8 9 10

11 12 13 14 15 16 17 18 19 20

20

30

21 22 23 24 25 26 27 28 29

31 32 33 34 35 36 37 38 39

Tamper resistant field modification

1 2 3 4 5 6 7 8 9 10

11 12 13 14 15 16 17 18 19 20

20

30

21 22 23 24 25 26 27 28 29

31 32 33 34 35 36 37 38 39

Gauge ø 40 mm

1 2 3 4 5 6 7 8 9 10

11 12 13 14 15 16 17 18 19 20

20

30

21 22 23 24 25 26 27 28 29

31 32 33 34 35 36 37 38 39

18-025-003 (with plastic nut) 2962-04 (Metal) 18-001-092 18-015-990 (0 ... 4 bar)

18-025-004 (with metal nut) 2962-89 (Plastic) 18-015-989 (0 ... 10 bar)

Our policy is one of continued research and development. We therefore reserve the right to amend, without notice, the specifications given in this document. (1997 - 8119d) © 2015 Norgren, Inc.

B07 Miniature ported filter/regulator

en 8.300.300.0305/18

# Minimum clearance required to remove bowl1 Panel mounting hole Ø 31 mm

54

41

38

38

214

#

28

68

164

28 28

210

#

28

68

160

1/8 inch

1

~

38

466

7

24

38

1,5

63 28 ..

. 44

Manual drain Automatic drainDimensions Bracket mounting

WarningThese products are intended for use in industrial compressed air systems only. Do not use these products where pressures and temperatures can exceed those listed under »Technical features/data«.Before using these products with fluids other than those specified, for non-industrial applications, life-support systems or other applications not within published specifications, consult IMI Precision Engineering, Norgren GmbH.Through misuse, age, or malfunction, components used in fluid power systems can fail in various modes.

The system designer is warned to consider the failure modes of all component parts used in fluid power systems and to provide adequate safeguards to prevent personal injury or damage to equipment in the event of such failure.System designers must provide a warning to end users in the system instructional manual if protection against a failure mode cannot be adequately provided.System designers and end users are cautioned to review specificwarnings found in instruction sheets packed and shipped with these products.

Diese Produkte sind ausschließlich in Druckluftsystemen zu verwenden. Sie sind dort einzusetzen, wo die unter »Technische Merkmale/-Daten« aufgeführten Werte nicht überschritten werden. Berücksichtigen Sie bitte die entsprechende Katalogseite. Vor dem Einsatz der Produkte bei nicht industriellen Anwendungen, in lebenser-

Anleitungsunterlagen enthalten sind, wenden Sie sich bitte direkt an IMI Precision Engineering, Norgren GmbH.Durch Missbrauch, Verschleiß oder Störungen können in Pneumatik-

systemen verwendete Komponenten auf verschiedene Arten versagen.Systemauslegern wird dringend empfohlen, die Störungsarten aller in Pneumatiksystemen verwendeten Komponententeile zu berück-

Verletzungen von Personen sowie Beschädigungen der Geräte im Falle einer solchen Störung zu verhindern. Systemausleger sind verpflichtet, Sicherheitshinweise für den End-benutzer im Betriebshandbuch zu vermerken, wenn der Störungs-schutz nicht ausreichend gewährleistet ist.

Dimensions in mm Projection/First angle