B-Veritas Operations Manager 5 0 Faq or.en-us

7/26/2019 B-Veritas Operations Manager 5 0 Faq or.en-us

1/45

[Page 1 of 45] 2012 Symantec

Veritas Ope ration s Man ag er 5.0

Frequ ently As ked Ques tions

Product version: 5.0

Documentation version: 5.0 Rev 0

Contents

Legal Notice ........................................................................................................................................................................... 7

Whats new in the 5.0 release? ....................................................................................................................................... 8

Support for Veritas Operations Manager Advanced features on Management Server ........... .......... .. 8

Ability to compress files on managed hosts ......................................................................................................... 8

Support for reclaiming thin storage ........................................................................................................................ 8

Ability to configure performance metering ......................................................................................................... 8

Enhanced performance charts with linear trend data ..................................................................................... 9

Ability to define Recovery Plan ................................................................................................................................. 9Support for importing type definitions for clusters....................................................................................... 10

Improved discovery and visualization of all applications ........................................................................... 10

Support for configuring a vCenter server on a non-default port .............................................................. 10

Selective discovery of VMware ESX servers and IBM LPAR servers ....................................................... 10

Support for multi-pathing discovery in VMware environment .......... ........... .......... ........... .......... ........... .. 10

Support for discovering Microsoft Hyper-V virtualization technology and storage correlation

discovery for LDom and LPAR ............................................................................................................................... 10

Symantec Performance Value Unit information for IBM LPAR and kernel-based virtual machines

(KVM) ............................................................................................................................................................................... 11

Automatic assignment of price tiers .................................................................................................................... 11

Support for additional discovery in Storage Insight Add-on ...................................................................... 11Veritas Operations Manager Storage Insight SDK Add-on .......................................................................... 11

Support for listing the configured enclosures using the command-line interface ............................ 12

Support for service management using the command-line interface ..................................................... 12

Support for new operations in Veritas Operations Manager Add-on for Storage Foundation

Administration 5.0 ...................................................................................................................................................... 12

Improved monitoring of Veritas Volume Replicator replications ............................................................ 13

Support for Microsoft Exchange Server 2010 discovery ............................................................................. 13

Support for specifying path for temporary work area while upgrading Management Server ..... 13

General ................................................................................................................................................................................. 14

What is Veritas Operations Manager (VOM)? .................................................................................................. 14What documentation resources are available for Veritas Operations Manager (VOM)? ................ 14

The following documentation resources are available for Veritas Operations Manager (VOM): 14

Does Veritas Operations Manager need anything installed on the managed host (MH) to work

with Storage Foundation (SF) 5.x? ....................................................................................................................... 14

Does Veritas Operations Manager interfere with Storage Foundation's functionality? .......... ........ 14

Does Veritas Operations Manager require the Veritas Enterprise Administrator (VEA)? ............. 14

How frequently is managed host (MH) information updated to the VOM Management Server

(MS) Database? ............................................................................................................................................................. 15


2/45




Does VOM display localized (i.e. Japanese or Chinese) File System mount points? .......................... 16

Does VOM support other non-Symantec Volume Managers and File Systems? ................................. 16

Does VOM support other non-Symantec Multi-pathing Solutions? ......................................................... 16

Does VOM support other Clustering Solutions? .............................................................................................. 17

Does VOM discover information related to zoning, masking, or switch configurations? ............... 17

What Veritas Cluster Server Management Console (VCSMC) functionality is not available in VOM

4.1? .................................................................................................................................................................................... 17

Can I adjust the session inactivity timeout? ...................................................................................................... 17

When should I create Virtual Business Service (VBS) or Organization type Business Entities? .. 17

Which VRTSsfmh package version is bundled with each VOM release? Which SFHA release is

each VRTSsfmh package version bundled with? ............................................................................................. 18

Installation & Upgrade ................................................................................................................................................... 19

How much space is required for VOM Management Server? ..................................................................... 19

How much space is required for VOM Management Server (MS) database? ....................................... 19 How much space is required for a VOM managed host (MH)? .................................................................. 19

I am running Storage Foundation Manager (SFM) or Veritas Cluster Server Management Console

(VCSMC). How can I upgrade to VOM 4.1? ......................................................................................................... 19

Can a VOM managed host (MH) be managed by both SFM 2.x Management Server (MS) and VOM

MS? .................................................................................................................................................................................... 19

Can Veritas Cluster Server Management Console (VCSMC) and VOM coexist? ................................ 19

If I update, will I lose all the historical information in Veritas Cluster Server Management

Console (VCSMC)? ....................................................................................................................................................... 19

Is VOM backward compatible with SFM 2.x MH?............................................................................................ 20

From which versions of Management Server can I directly upgrade to 5.0? ....................................... 20

From which versions of MH can I directly upgrade to 5.0 MH? ................................................................ 20

Why does VOM give me the option to set the Management Server (MS) host name during

configuration? ............................................................................................................................................................... 20

Is Management Server (MS) HA supported for Windows MS? .................................................................. 20

Can VOM Management Server (MS) be installed on a virtual machine? ................................................ 20

What is AutoConfigure and gendeploy.pl? ........................................................................................................ 20

How to remove hosts from VOM using the command line? ........................................................................ 21

Networking ......................................................................................................................................................................... 22

What protocol is used for VOM? ............................................................................................................................ 22

What are the networking requirements? What firewall ports need to be opened? .......................... 22

What kind of network traffic can be expected if VOM is deployed? ........................................................ 22What kind of SNMP support is there in VOM?.................................................................................................. 22

Virtual machines ............................................................................................................................................................... 23

Can VOM manage Storage Foundation that is running in a VMware virtual machine? ................... 23

I added vCenter to VOM; can I see end-to-end storage correlation from virtual machine to LUN?

............................................................................................................................................................................................ 23

Can I perform Virtualization discovery through vCenter using a non-default port? ........................ 23


3/45




Add-ons ................................................................................................................................................................................ 24

What is a VOM add-on? ............................................................................................................................................. 24

Do add-ons install anything on the managed host (MH)? ........................................................................... 24Since older versions of Storage Foundation Manager (SFM) add-ons are not compatible with

VOM, is there an upgrade path available for these add-ons? ..................................................................... 24

Are newer versions of Add-ons that were shipped for VOM 4.1 available? ......................................... 24

Which VOM MS/MH versions are compatible with an add-on? ................................................................ 24

Security ................................................................................................................................................................................ 25

What privilege or account do you need on a managed host (MH)? ......................................................... 25

Does xprtld allow for PAM, Active Directory, or LDAP-based authentication? .......... .......... ........... .... 25

What is a Security Group? ........................................................................................................................................ 25

What should be specified in the name of a security group? ....................................................................... 25

How are privileges given on a cluster (Cluster administrator/operators) from VOM? .......... ......... 25

How can I limit the visibility of the out-of-band storage information (Storage Insight Add-on)?25

Administer Link for Host Operations ....................................................................................................................... 26

Why do I see the Administer link on the Host detail page as RED instead of GREEN even after I

add a managed host successfully to VOM Management Server (MS)?.................................................... 26

How do I perform operations on Storage Foundation (SF) objects such as disk groups or

volumes? ......................................................................................................................................................................... 26

Infrastructure .................................................................................................................................................................... 27

Is xprtld a Web server? ............................................................................................................................................. 27

Why does VOM use a separate Web server for the console when xprtld is also a Web server? .. 27

What is xprtlc ? ............................................................................................................................................................. 27What is fault.pl? ............................................................................................................................................................ 27

What is xdist? ................................................................................................................................................................ 27

What is xinfo? ................................................................................................................................................................ 28

What is xclusinfo?........................................................................................................................................................ 28

What is vomsc? ............................................................................................................................................................. 28

Can I access the VOM database directly? ........... .......... ........... .......... ........... ........... .......... ........... .......... ........... .. 28

Reporting ............................................................................................................................................................................. 29

What reports does VOM offer? ............................................................................................................................... 29

Is VOM able to create comparisons between reports? ................................................................................. 29

Performance Statistics ................................................................................................................................................... 30

What performance-related data does VOM track? ......................................................................................... 30

Where are performance statistics stored? ........................................................................................................ 30

Are performance graphs supported on Windows managed hosts?......................................................... 30

Patches ................................................................................................................................................................................. 31

Is VOM able to show which SF/HA patches a specific host requires? .......... ........... .......... ........... .......... . 31

Is VOM able to show available and applicable VOM patches and add-ons? ......................................... 31


4/45




My network does not allow for direct Internet access. Can I still access the Symantec

Operational Readiness Tool (SORT) functionality? ....................................................................................... 31

Can I use VOM to deploy any type of patches including Veritas Storage Foundation patches?.... 31

VCS Fire Drill ...................................................................................................................................................................... 32

How is HA fire drill executed? ................................................................................................................................ 32

Can HA fire drill functionality use the SORT checks? .................................................................................... 32

How is DR fire drill executed? ................................................................................................................................ 32

Can I create fire drill service groups in VOM? .................................................................................................. 32

What platforms are supported for HA and DR fire drills? ........................................................................... 32

Can I schedule fire drill runs? ................................................................................................................................. 32

How do I see the results of fire drill runs? ......................................................................................................... 32

Centralized Storage Foundation Administration ................................................................................................. 34

What are the Storage Foundation operations that are available through the centralized consoleof Veritas Operations Manager? ............................................................................................................................ 34

Object ............................................................................................................................................................................... 34

Type of Operation........................................................................................................................................................ 34

Disks ................................................................................................................................................................................. 34

Creating disk groups .................................................................................................................................................. 34

Adding disks to a disk group ................................................................................................................................... 34

Recovering the faulted disks ................................................................................................................................... 34

Replacing a faulted disk ............................................................................................................................................ 34

Removing disk from a disk group ......................................................................................................................... 34

Renaming disks in a disk group ............................................................................................................................. 34

Resizing disks in a disk group ................................................................................................................................ 34Initializing disks ........................................................................................................................................................... 34

Recovering a disk group ........................................................................................................................................... 34

Deporting a disk group .............................................................................................................................................. 34

Importing a disk group .............................................................................................................................................. 34

Destroying a disk group ............................................................................................................................................ 34

Disconnecting a disk ................................................................................................................................................... 34

Creating volumes ......................................................................................................................................................... 34

Volumes ........................................................................................................................................................................... 34

Configuring instant volume snapshots ............................................................................................................... 34

Configuring space-optimized snapshots for volumes ................................................................................... 34

Configuring break-off mirror snapshots for volumes ................................................................................... 34Resizing volumes ......................................................................................................................................................... 34

Adding mirrors to volumes...................................................................................................................................... 34

Removing the mirrors of a volume ....................................................................................................................... 34

Restoring data from the snapshots of volumes ............................................................................................... 34

Refreshing the snapshot of a volume ........... .......... ........... .......... ........... .......... ........... ........... .......... ........... ......... 34

Configuring a schedule for a volume snapshot refresh ................................................................................ 34

Adding a snapshot volume to a refresh schedule ........................................................................................... 34


5/45




Modifying the refresh schedule for a volume snapshot ............................................................................... 34

Removing the schedule for a volume snapshot refresh ............................................................................... 34

Deleting volumes ......................................................................................................................................................... 34

Dissociating snapshot ................................................................................................................................................ 34

Reattaching a snapshot ............................................................................................................................................. 34

Stopping a volume ....................................................................................................................................................... 34

Recovering a volume .................................................................................................................................................. 34

Reactivating a volume ............................................................................................................................................... 34

Restoring a volume ..................................................................................................................................................... 34

Creating file systems .................................................................................................................................................. 34

File Systems ................................................................................................................................................................... 34

Mounting a non clustered file system on a host .............................................................................................. 34

Mounting a clustered file system on a host ....................................................................................................... 34

Unmounting a non clustered file system from a host .......... .......... ........... .......... ........... .......... ........... .......... . 35

Unmounting a clustered file system ..................................................................................................................... 35

Enabling a change log ................................................................................................................................................ 35

Disabling a change log ............................................................................................................................................... 35

Removing a change log .............................................................................................................................................. 35

Synchronizing a change log ..................................................................................................................................... 35

Defragmenting a file system .................................................................................................................................... 35

How do the centralized Storage Foundation operations differ from the operations available

through the UNIX and the Windows Administration add-ons? ................................................................. 35

Why is this delivered as a pre-bundled add-on? ............................................................................................. 35

Do we need any managed host components to be installed to perform centralized Storage

Foundation operations? ............................................................................................................................................ 36What are the Storage Foundation High Availability (SFHA) supported versions? ............................ 36

What are the ApplicationHA versions supported? ......................................................................................... 36

Which operations are not supported on a Windows host? ......................................................................... 36

Which file systems are supported for the mount and the unmount operations? .............................. 36

Licensing .............................................................................................................................................................................. 38

VOM Management Entitlement Report ............................................................................................................... 38

Virtual Business Service (VBS) Availability Add-on 5.0 .................................................................................... 39

How is the VBS Availability Add-on 5.0 different from the BE Operations Add-on 4.0? ................. 39

How are VOM components deployed? ................................................................................................................ 39

How are the VBS-backend components deployed? ........................................................................................ 39Is VOM MS in the critical path and a single point of failure? ...................................................................... 39

What is the purpose of the Enable fault management operation? ........................................................... 39

How often does the configurator run? ................................................................................................................ 40

How can I know if all the nodes have been properly configured for VBS to work? .......................... 40

If the VBS configuration goes out of synch, how does one correct it? .................................................... 40

What happens to the VBS definitions if VOM MS is re-installed? ............................................................. 41

How is data passed from VOM MS to the cluster nodes? ............................................................................. 41


6/45




Where are the various log files stored for this feature? ............................................................................... 41

Which Virtualization technologies are supported for Start/Stop virtual machine ........................... 41

What is the port used by the VBS daemon? ...................................................................................................... 41

How is the VBS daemon made HA?....................................................................................................................... 41

Add-on for ApplicationHA Management 5.0 .......................................................................................................... 42

What are the VOM components which are part of ApplicationHA support? .......... .......... ........... ......... 42

Which ApplicationHA versions are supported by this add-on? ................................................................ 42

Which are the virtualization technologies supported by Add-on for ApplicationHA Management?

............................................................................................................................................................................................ 42

Can I deploy ApplicationHA on the virtual machine from VOM using Deployment Manager? ..... 42

What type of management operations can I do from the ApplicationHA tab? .................................... 42

In the ApplicationHA tab, I am able to click on "Configure Application Monitoring" to launch the

wizard and I can see input fields, but I am unable to configure the application. What might be

the reason? ..................................................................................................................................................................... 42Can I configure VCS support for ApplicationHA from VOM? ...................................................................... 43

What are the pre-requisites to perform the enable/disable ApplicationHA infrastructure

operation? ...................................................................................................................................................................... 43

How do I know the configuration status of VCS support for ApplicationHA on a node?................. 43

How do I know the infrastructure host that manages the ApplicationHA virtual machine? ......... 43

Why is the Infrastructure Host link missing in the summary panel of my ApplicationHA virtual

machine? ......................................................................................................................................................................... 43

Troubleshooting Information ...................................................................................................................................... 44

Management Server (MS) ......................................................................................................................................... 44

Managed host (MH) .................................................................................................................................................... 45


7/45




Legal NoticeCopyright 2012 Symantec Corporation. All rights reserved.

Symantec, the Symantec logo, Veritas, and Veritas Storage Foundation are trademarks or registered trademarks of Symantec Corporation or itsaffiliates in the U.S. and other countries. Other names may be trademarks of their respective owners.

This Symantec product may contain third party software for which Symantec is required to provide attribution to the third party (Third Party

Programs). Some of the Third Party Programs are available under open source or free software licenses. The License Agreement accompanying the

Software does not alter any rights or obligations you may have under those open source or free software licenses. Please see the Third Party Legal

Notice Appendix to this Documentation or TPIP ReadMe File accompanying this Symantec product for more information on the Third Party

Programs.

The product described in this document is distributed under licenses restricting its use, copying, distribution, and decompilation/reverse

engineering. No part of this document may be reproduced in any form by any means without prior written authorization of Symantec Corporation

and its licensors, if any.

THE DOCUMENTATION IS PROVIDED "AS IS" AND ALL EXPRESS OR IMPLIED CONDITIONS, REPRESENTATIONS AND WARRANTIES, INCLUDING

ANY IMPLIED WARRANTY OF MERCHANT ABILITY, FITNESS FOR A PARTICULAR PURPOSE OR NON-INFRINGEMENT, ARE DISCLAIMED, EXCEPT

TO THE EXTENT THAT SUCH DISCLAIMERS ARE HELD TO BE LEGALLY INVALID. SYMANTEC CORPORATION SHALL NOT BE LIABLE FOR

INCIDENTAL OR CONSEQUENTIAL DAMAGES IN CONNECTION WITH THE FURNISHING, PERFORMANCE, OR USE OF THIS DOCUMENTATION. THEINFORMATION CONTAINED IN THIS DOCUMENTATION IS SUBJECT TO CHANGE WITHOUT NOTICE.

The Licensed Software and Documentation are deemed to be commercial computer software as defined in FAR 12.212 and subject to restricted

rights as defined in FAR Section 52.227-19 "Commercial Computer Software - Restricted Rights" and DFARS 227.7202, "Rights in Commercial

Computer Software or Commercial Computer Software Documentation", as applicable, and any successor regulations. Any use, modification,

reproduction release, performance, display or disclosure of the Licensed Software and Documentation by the U.S. Government shall be solely in

accordance with the terms of this Agreement.

Symantec Corporation

350 Ellis Street

Mountain View, CA 94043

http://www.symantec.com
http://www.symantec.com/http://www.symantec.com/http://www.symantec.com/


8/45




Whats new in the 5.0 release?

Support for Veritas Operations Manager Advanced features on Management Server

Veritas Operations Manager Management Server supports a few Veritas Operations Manager

Advanced features that can temporarily be used under a demo license of Veritas Operations

Manager Advanced. To obtain a permanent license, you need to accept the End User's License

Agreement (EULA) for Veritas Operations Manager Advanced.

These features include: Discovery of hosts, that do not have Veritas Storage Foundation and High Availability (SFHA)

products installed on them.

Discovery of hosts via agentless method Discovery of network-attached storage (NAS).

Ability to compress files on managed hosts

Veritas Operations Manager Management Server now lets you set up file compression on a

managed host at the file system (mount point) level. This feature is supported for VxFS file

systems with Veritas Storage Foundation 6.0 or later on the managed host.

The file compression feature lets you do the following:

Select directories for compression

Set up a schedule for running the compression process on the host

Compress or uncompress directories on demand

View a report of space saved by file compression

Support for reclaiming thin storage

Using Veritas Operations Manager Management Server console, you can reclaim thin storage. This

feature requires VxFS file system, Storage Foundation version 6.0 or later. Also, using Veritas

Operations Manager Management Server console you can determine how much storage can be

reclaimed before performing this operation.

Ability to configure performance metering

Veritas Operations Manager 5.0 lets you gather performance statistics for the VMware vCenter

server, the VMware ESX server, and the managed host. You can also disable performance statistics

gathering if required.

If Storage Insight Add-on 5.0 is installed and the discovery host is upgraded to Veritas Operations

Manager managed host version 5.0, performance statistics gathering is automatically enabled for

storage enclosures that were previously configured.


9/45




Performance statistics are collected only for the following storage enclosures:

EMC CLARiiON

EMC Symmetrix

IBM XIV

NetApp

Enhanced performance charts with linear trend data

New enhanced performance charts are now available in Veritas Operations Manager along with

the linear trend data. You can view performance charts for the following resources:

volume host

disk

initiator

file system

multi-pathing path

enclosure

array ports

adapter

Performance charts for disks and volumes are available only if they are managed by Veritas

Volume Manager. Performance charts for multi-pathing paths, initiators, and enclosures are

available if they are managed by physical hosts running DMP or VMware ESX servers running

VxDMP.

Ability to define Recovery Plan

Recovery Plans consist of the steps that need to be run when a disaster or contingency arises.

Veritas Operations Manager provides the ability to create and store Recovery Plans, to manuallyrun a plan, and to monitor and log its progress and status.

Using the Veritas Operations Manager console, you can perform the following tasks:

Create a Recovery Plan.

Edit a Recovery Plan.

Delete a Recovery Plan.

Run a Recovery Plan.


10/45




Support for importing type definitions for clusters

In Veritas Operations Manager, you can now import custom resource type definition into a cluster

configuration. For example, you may need to import type definitions when you install an

Independent Software Vendor (ISV) agent on a Veritas Cluster Server (VCS) cluster. On Windows,

the type definitions are imported by default, however on UNIX, the administrator needs to

explicitly import the definitions.

Improved discovery and visualization of all applications

Veritas Operations Manager now provides complete visibility into the different applications that

are discovered from physical or virtual machines. The discovery includes the applications that

Symantec ApplicationHA discovers on different virtualization technologies (such as VMware, KVM,

LPAR, and LDOM). You can view applications for the entire domain, or for selected business

entities.

Support for configuring a vCenter server on a non-default port

In Veritas Operations Manager 5.0, you can configure a vCenter server on a non-default port. You

can specify the fully-qualified name of the vCenter server or its IP address, and the port number

on which the vCenter Web service is running.

Selective discovery of VMware ESX servers and IBM LPAR servers

In the previous release, when you configured a vCenter server or an HMC server, VeritasOperations Manager discovered all the ESX servers under the vCenter server, or all the LPAR

servers under the HMC server. In Veritas Operations Manager 5.0, you can selectively enable or

disable discovery for some of the ESX servers or LPAR servers.

Support for multi-pathing discovery in VMware environment

Veritas Operations Manager now supports multi-pathing discovery for the disk paths under

VMware native multi-pathing (NMP), EMC PowerPath/Virtual Edition, and Symantec VxDMP on

ESX servers. However, path maintenance operations (enable or disable path) are supported only

on Symantec VxDMP.

Support for discovering Microsoft Hyper-V virtualization technology and storage

correlation discovery for LDom and LPAR

Veritas Operations Manager supports the discovery of following virtualization technologies:

Microsoft Hyper-V servers, Hyper-V virtual machines, and their server and storage

correlation.

Storage correlation discovery for Logical partition (LPAR), VIO server, and VIO clients.


11/45




Storage correlation discovery for Oracle VM Server for SPARC (LDoms).

Symantec Performance Value Unit information for IBM LPAR and kernel-based virtual

machines (KVM)

In Veritas Operations Manager 5.0, you can calculate the Symantec Performance Value Unit (SPVU)

for the Symantec products that run on IBM LPAR and KVM.

Automatic assignment of price tiers

You can now assign price tiers to a single host, or multiple hosts, automatically in Veritas

Operations Manager using the uploaded price tier information.

Support for additional discovery in Storage Insight Add-on

Veritas Operations Manager now lets you enable deep discovery for the following enclosures using

Storage Insight Add-on:

HP Enterprise Virtual Arrays (EVA)

IBM System Storage DS

EMC Celerra

EMC VNX and Unified Storage

EMC VPLEX

3PAR

Additionally, Storage Insight Add-on now also supports network attached storage (NAS) discovery

for NetApp enclosures, and Fully Automated Storage Tiering (FAST) support on EMC Symmetrix

VMAX enclosures.

Veritas Operations Manager Storage Insight SDK Add-on

You can use Veritas Operations Manager Storage Insight SDK Add-on to create customized array-

specific add-ons. This feature is useful if the storage discovery for an array is not supported

through Storage Insight Add-on. The custom add-ons are called Storage Insight plug-ins. You canspecify the array objects to be discovered, discovery script, and provide the unique device

identifier for the arrays and logical disks for end-to-end correlation from the LUNs to the storage

arrays. You can install Storage Insight SDK Add-on on any host that has the VRTSsfmh package

installed on it. The host may or may not be configured to a Management Server domain.


12/45




Support for listing the configured enclosures using the command-line interface

In Veritas Operations Manager 5.0, you can list all the enclosures that are configured through

Veritas Operations Manager Storage Insight Add-on for Deep Array Discovery and Mapping using

the command-line interface. You can use the arrayinfo option of the vomadm command to list the

enclosures.

Support for service management using the command-line interface

In Veritas Operations Manager 5.0, you can use the service option of the vomadm command to

manage the various services using the command-line interface. You can start a service, stop a

service, restart a service, or display the status of a service. You can also use the command to

display the version of the Veritas Operations Manager packages that are installed on Management

Server (VRTSsfmcs and VRTSsfmh).

Support for new operations in Veritas Operations Manager Add-on for Storage FoundationAdministration 5.0

In Veritas Operations Manager Add-on for Storage Foundation Administration, the following

operations have been enhanced to improve user experience and auditing over previous

implementations:

Disk group operations:

Create a volume.

Import a disk group. Recover a disk group.

Destroy a disk group.

Remove a disk from a disk group.

Rename a disk.

Resize a disk.

Initialize a disk.

Disconnect or deactivate a disk.

Volume operations:

Disassociate a snapshot.

Re-attach a snapshot.

Recover a volume.

Stop a volume.


13/45




Reactivate a volume.

Restore a volume.

Create a file system.

File system operations:

Enable a change log.

Disable a change log.

Synchronize a change log.

Remove a change log.

Defrag a file system.

Improved monitoring of Veritas Volume Replicator replications

In Veritas Operations Manager 5.0, you can monitor any Replicated Volume Group (RVG) for

replications that lag behind in terms of log usage (SRL usage), or in terms of data size. You can

define high and low threshold levels for raising an alert that is displayed in the Veritas Operations

Manager console.

Support for Microsoft Exchange Server 2010 discovery

Veritas Operations Manager now supports the discovery and management of Microsoft Exchange

Server 2010 hosts that are configured in your datacenter.

Support for specifying path for temporary work area while upgrading Management Server

Management Server upgrade requires additional disk space to create the temporary files. While

upgrading to Veritas Operations Manager 5.0, if you do not have enough disk space in your current

database directory, you are prompted to provide the path for a temporary working area having

enough disk space. This temporary working area is used to create the temporary files.


14/45




General

What is Veritas Operations Manager (VOM)?

Veritas Operations Manageris a comprehensive business solution for monitoring, operating, and

reporting on datacenter environments using Veritas Storage Foundation, Veritas Cluster Server,

Veritas Dynamic Multi-Pathing, Veritas Dynamic Multi-Pathing for VMware, and Symantec

ApplicationHA. It combines the power of its predecessors namely Storage Foundation Manager,

VCS Management Console, VCS Java Console, and Veritas Enterprise Administrator into a single

powerful solution.

What documentation resources are available for Veritas Operations Manager (VOM)?

The following documentation resources are available for Veritas Operations Manager (VOM):

Online Help - The VOM online help is installed with the product. To access the online help, click

the 'Help' link at the top right of the Veritas Operations Manager console.

Guides The VOM user documentation is available onhttps://sort.symantec.com/documents

Does Veritas Operations Manager need anything installed on the managed host (MH) towork with Storage Foundation (SF) 5.x?

Yes. Every version of SF that Veritas Operations Managermanages requires the same VRTSsfmh

package to be installed. However, this package is bundled with SF 5.1, and later versions.

Does Veritas Operations Manager interfere with Storage Foundation's functionality?

No.

Does Veritas Operations Manager require the Veritas Enterprise Administrator (VEA)?

VEA is only required on the managed host (MH) to support SNMP traps, to run administration

commands like create volume, and for Windows and HP-UX 3.5 discovery. VOM does not require

VEA on the MH, but those features will not be available.
https://sort.symantec.com/documentshttps://sort.symantec.com/documentshttps://sort.symantec.com/documentshttps://sort.symantec.com/documents


15/45




How frequently is managed host (MH) information updated to the VOM Management Server(MS) Database?

The discovery on each MH is broken down into families to focus on a particular functional area

that VOM discovers information about.

Family Frequency in

minutes

Discovered information

Host 1440 The operating system, packages, and networking for the

host.

Typically, most of the information that is related to this

family does not change frequently.

SF 30 Volume Manager, File Systems, and the related storage

network.VCS 60 Veritas Cluster Server and the related information.

DB 60 Oracle, DB2, MSSQL, and Sybase databases and their storage

dependencies.

LDR 1440 The licenses that are installed on the hosts.

NR 5 Configuration status and external faults.

Native 360 Third-party volume management information.

Zones 120 Oracle Solaris zones and their storage dependencies.

LDoms 120 Oracle Solaris LDoms, and related CPU and memory

information.

KVM 120 KVMs and their correlation with the host.

Hyper-V 120 Virtual machines and storage discovery.LPAR 360 Hosts, guests, and storage information.

VMware 360 ESX servers, virtual machines, and their storage

dependencies.

Note: This information is discovered only when the

Control Host Add-on is installed on a managed host

that is designated as the control host.

Agentless 360 The following information on the hosts that are configured

on the control host for agentless:

The IP addresses, operating system, and the usage ofthe CPU and memory

The host bus adapters (HBAs) on the host

The disks on the hosts and their correlation with the

array LUNs and multi-pathing

The volumes and the volume groups on the native

Volume Manager


16/45




The mount points of the file systems and the

correlation of the file systems with the disks

In a VMware guest environment, the correlation of

the guest with the virtual machine and the

correlation of the storage in the guest with the

storage exported from the ESX server.

Note:This information is discovered only when the Control

Host Add-on is installed on a managed host that isdesignated as the control host.

*Additionally, Veritas Storage Foundation and Veritas Cluster Server families are also event driven.

For example, when a DMP path is disabled, or a Service Group is detected offline, it will trigger adiscovery cycle so that the information is quickly updated in the VOM Management Server Database.It provides a near real-time reporting for Storage Foundation and VCS configurations.

With the exception of a small heartbeat communication occurring every 10 minutes, no additional

data is sent across to the MS unless changes to the configuration are detected. Please refer to the

VOM Administrators Guide for more information on VOM MH discovery.

Does VOM display localized (i.e. Japanese or Chinese) File System mount points?

Yes. The standard encoding VOM uses is UTF-8. Any other encoding that is used requires that the

xprtld daemon on the managed host be run under the locale/encoding that the mount point nameswere created. English, Japanese, Simplified Chinese, and all UTF-8 locales are generally supported.

Does VOM support other non-Symantec Volume Managers and File Systems?

Yes. VOM discovers Logical Volume Manager (LVM) information on Linux, HP-UX, and AIX

managed hosts, as well as ZFS information on Solaris. VOM provides discovery of this information

only, no administrative options are currently available.

For Windows, it discovers both Basic and Dynamic Volumes.

VOM also supports discovery of VxFS as well as many other native file systems including EXT3,ReiserFS, HFS, UFS, JFS, JFS2, NTFS, and ZFS.

Does VOM support other non-Symantec Multi-pathing Solutions?

Yes. Besides support for Veritas DMP, VOM also supports discovery of EMC PowerPath, Microsoft

MPIO, and HP Native multipathing.

However, the DMP Management feature supports only Veritas DMP and Veritas DMP for VMware.


17/45




Does VOM support other Clustering Solutions?

Yes. VOM supports discovery of Microsoft Cluster Server (MSCS) and VMware cluster.

Does VOM discover information related to zoning, masking, or switch configurations?

No.

What Veritas Cluster Server Management Console (VCSMC) functionality is not available inVOM 4.1?

Site concept: replaced by Business Entity concept

Tagging: Region, Line of Business, Department: replaced by Extended Attributes

Readiness views

Migrate site workflow: Migrate cluster is available, replaced by Virtual Business Services Add-

on

Recover site workflow: replaced by Virtual Business Services Add-on

DR Alert and coordinated action to recover: Alerting available through faults but not

actionable. However, the coordinated action to recover can be accomplished using the Recovery

Plan feature in the Virtual Business Service Availability Add-on. Refer to the Virtual Business

Service - Availability User's Guide for more details.

Simulator support

Deprecated features (not targeted for future releases)

o Attribute reports for Clusters/groups/resources: Shown in general VOM views

o

Failure Summary: Shown in Uptime Analysis Reporto Fault Trending: Shown in Uptime Analysis Report

o Group Activity: Shown in Resource Activity Report

o Agent Inventory/ Agent Usage

o Heartbeat report

Can I adjust the session inactivity timeout?

Yes, this can be adjusted from the Web Server Settings panel in the VOM Console under Settings >

General.

It is not recommended to set a large timeout as that may increase the memory utilization on theMS. If many people log on to VOM simultaneously and do not explicitly log off, it could cause out of

memory errors.

When should I create Virtual Business Service (VBS) or Organization type BusinessEntities?

VBS type Business Entities should be created when, as an administrator, you want to show

associated objects and faults with the base that you have defined. This type is more resource


18/45




intensive as it automatically discovers associated objects. So, it is recommended that you specify

less than 100 base objects. VBS types can be further extended to manage multi-tier applications

using the Virtual Business Service Availability Add-on.

If you want to create Business Entities mainly to organize your hosts, to give user administrative

access, or scope reports and operations, then, you should create Business Entities of the

Organization type. This is a group of logically associated hosts (e.g. by Admin, by Team, by

Datacenter/Lab). Organization type Business Entities are less resource intensive than the VBS

variety, and can include potentially 1000s of base hosts.

Both types can be used to define Security Groups (Authorization) as well as scope reports and

operations.

Which VRTSsfmh package version is bundled with each VOM release? Which SFHA releaseis each VRTSsfmh package version bundled with?

VOM release VRTSsfmh version SFHA release that it is bundled with

2.1 (SFM) 2.1.198.0 SFHA AIX, Solaris, Linux 5.1

2.1.210.0 SFHA Windows 5.1SP1

2.1RP1 (SFM) 2.1.229.0 SFHA Linux 5.0MP4

SFHA Unix 5.1RP1

SFHA Linux and Solaris 5.1RP2

3.0 3.0.357.0 -

3.0.358.0 SFHA Windows 5.1 SP2

ApplicationHA VMware Linux 5.1

ApplicationHA VMware Windows 5.1SP1

3.0 RU 3.0.357.0 -

3.0 RP1 3.0.402.0 -

3.1 3.1.429.0 SFHA Solaris, AIX 5.1SP1

ApplicationHA VMware Linux 5.1SP2

3.1RP1 3.1.830.0 SFHA HP, Linux 5.1SP1 & 5.1SP1RP1

SFHA AIX, Solaris, Linux 5.1SP1RP2

ApplicationHA VMware Windows 5.1SP2

4.0 4.0.1097.0 -

4.0RU1 4.0.1598.0 ApplicationHA VMware 6.0

4.1 4.1.119.0 SFHA Unix, Windows 6.0

ApplicationHA Unix 6.0


19/45




Installation & Upgrade

How much space is required for VOM Management Server?

4 GB space is adequate to install Management Server. The space required for the database

depends on the number of hosts that you plan to manage.

How much space is required for VOM Management Server (MS) database?

By default, the VOM installation creates the database in the /var directory on the MS. It is

recommended that you change this to its own partition or volume. If possible, it is recommended

that this be put on a striped mirror to improve performance. The recommended size depends on

the amount of resources that will be managed. It is recommended that you allocate 10 GB of disk

space for every 1000 managed hosts.

How much space is required for a VOM managed host (MH)?

2 GB disk space is adequate.

I am running Storage Foundation Manager (SFM) or Veritas Cluster Server ManagementConsole (VCSMC). How can I upgrade to VOM 4.1?

Upgrade to VOM 5.0 is only supported from VOM 3.x. Users of SFM need to upgrade to VOM 3.x,

and then upgrade to VOM 5.0. Users of VCSMC need to start with a fresh install of VOM.

Can a VOM managed host (MH) be managed by both SFM 2.x Management Server (MS) andVOM MS?

No. A VOM MH requires a VOM MS.

Can Veritas Cluster Server Management Console (VCSMC) and VOM coexist?

Yes. Both can be installed on the same host.

If I update, will I lose all the historical information in Veritas Cluster Server Management

Console (VCSMC)?

Yes. Since there is no explicit upgrade from VCSMC to VOM, no historical information would be

shown in VOM. However, because VCSMC and VOM can co-exist, you can still use VCSMC for anyhistorical data.


20/45




Is VOM backward compatible with SFM 2.x MH?

Yes. Discovery will still work. However, new VOM features and details are not seen for these MHs.

In addition, VCS operation support was added only in VOM 3.0, implying that managed hosts also

need to be running VRTSsfmh package version 3.0, or later.

From which versions of Management Server can I directly upgrade to 5.0?

The current release of Management Server supports upgrade from version 3.1, or later.

From which versions of MH can I directly upgrade to 5.0 MH?

The current release of VRTSsfmh package supports upgrades from version 2.x, or later. However,

if a host has VRTSsfmh 2.0 package, it is recommended that you upgrade the VRTSsfmh package to

5.0 before managing the host using a 5.0 Management Server.

Why does VOM give me the option to set the Management Server (MS) host name during

configuration?

VOM suggests the MS host name and IP address on the configuration page. You need to verifywhether the host name/IP address is accessible from all intended managed hosts.

Is Management Server (MS) HA supported for Windows MS?

Yes, HA support for Windows MS has been added in VOM 4.0.

Can VOM Management Server (MS) be installed on a virtual machine?

Yes, all it requires is an operating system that is in the list supported by VOM MS. For VMware,

VOM requires a 64-bit operating system for Linux and Windows. The VOM MS can also be installed

in its own Zone or LDom.

What is AutoConfigure and gendeploy.pl?

The AutoConfigure option lets you add a managed host to the VOM Management Server domain

with minimal user interaction.

This script is downloadable from Settings -> Host. In the Manage Hosts view, select theAutoConfigure tab, and click Download.

The script can also be created using the gendeploy.pl utility on VOM Management Server:

Unix/Linux MS:/opt/VRTSsfmh/bin/gendeploy.pl --out addvommh.pl


21/45




Windows MS (VRTSsfmh install directory may vary):cd C:\Program Files\Veritas\VRTSsfmh\bin

perl.exe gendeploy.pl --out addvommh.pl

You can copy the script (addvommh.pl in this example) that is downloaded from Management

Server OR created using gendeploy.pl to all the managed hosts that you want to add to the domain.

After you copy the script, you have to run it on each host you wish to add. These hosts must have

the VRTSsfmh package installed before you run the script.

Unix/Linux MH:chmod +x addvommh.pl

./addvommh.pl

Windows MH (VRTSsfmh install directory may vary):cd "C:\Program Files\Veritas\VRTSsfmh\bin

perl.exe addvommh.pl

The gendeploy generated script (vommh.pl in this example) has the VOM MS hostname embedded

in it. This is the name used to contact the MS during MH configuration. In case VOM MS is not

reachable from the MH via this default name, an alternate hostname/IP address can be specified

for the VOM MS using the domain option to vommh.pl. This option is available only for MH version

4.0RU1, or later.

How to remove hosts from VOM using the command line?

The host-mgmt option of the vomadm utility can be used to remove a single host, or multiplehosts, from VOM. It is currently supported only for hosts that are configured as Agents (hosts that

have the VRTSsfmh package installed):

Unix: /opt/VRTSsfmh/bin/vomadm host-mgmt remove

Windows: "C:\Program Files\Veritas\VRTSsfmh\bin\perl.exe" "C:\Program

Files\Veritas\VRTSsfmh\bin\vomadm" host-mgmt remove

See the Veritas Operations Manager Management Server Administrators Guide for more

information.


22/45




Networking

What protocol is used for VOM?

VOM uses an HTTPS-based protocol. Essentially, it uses Web services as the underlying message

exchange format.

What are the networking requirements? What firewall ports need to be opened?

All communication between managed hosts (MH) and VOM Management Server (MS) occurs

through port tcp/5634. If you have a firewall in your environment, this port needs to be opened

(bi-directional). For the user interface, you need to open port 14161 between the client desktop

on which the Web browser runs, and the MS. NO other port is required.

The MS host name needs to be resolvable from the MH. It is recommended that DNS be used forthis. If the host name is not resolvable, you can specify a valid IP address. However, this may affectthe usability of the product, as the IP is displayed as the Host name in the VOM console.

What kind of network traffic can be expected if VOM is deployed?

Managed hosts (MH) send an HTTP request (ping) every 10 minutes to the Management Server

(MS) indicating that it is UP. This request has less than 1 KB of payload. When there is a change

detected on the MH, the MH sends an HTTP POST to the MS indicating the change. However, only

differences (diffs) are sent. So, in an environment that does not change, there is no traffic other

than the 10-min pings from each managed host. When there is a change, the payload size depends

on the amount of change, which is never more than a full (initial) discovery of that host. On MHswith 15,000 LUNs and about 2,000 file systems and volumes, the full discovery payload can be aslarge as a few megabytes.

What kind of SNMP support is there in VOM?

SNMP trap support is limited in VOM. It does require that VEA be installed and running on the

managed host, because it is the source of events that are sent to SNMP server. VOM ships with an

SNMP MIB as part of the Management Server package. You can select the specific events to be

forwarded. See the rule manager under the "Monitor" tab in the console, and refer to

https://sort.symantec.com/documents.
https://sort.symantec.com/documentshttps://sort.symantec.com/documentshttps://sort.symantec.com/documents


23/45




Virtual machines

Can VOM manage Storage Foundation that is running in a VMware virtual machine?

Yes. VOM supports Storage Foundation for Windows that is running on a VMware virtual machine.

Since in most cases VMware does not expose the HBA directly to the guests, VOM would not be

able to discover the array port of any LUNs nor the HBA ports. However, VOM displays the

enclosure information for any raw device mapped LUNs. Non-RDM disks are plain old SCSI disks

since they are abstracted from the guest.

I added vCenter to VOM; can I see end-to-end storage correlation from virtual machine toLUN?

End-to-end storage correlation requires deep array discovery using Storage Insight Add-on forthose enclosures connected to the ESX server. This will provide storage correlation from VMDK

file to datastore, and to LUNs in the enclosure. To correlate a disk in virtual machine to VMDK file,

you need to add the virtual machine to Management Server by installing agent or agentless.

Can I perform Virtualization discovery through vCenter using a non-default port?

The default vCenter port is 443 which is used by VOM for Virtualization discovery. However if

vCenter is configured on a non-default port, one can specify the port number after vCenter IP /

hostname so that VOM will use the same for discovery.

For example, MYvCenter.mydomain.com:65535


24/45




Add-ons

What is a VOM add-on?

VOM add-ons allow the extension of the base functionality that is included in VOM. Refer to

http://go.symantec.com/vomfor more information about the available add-ons.

Do add-ons install anything on the managed host (MH)?

It depends on the add-on. Some add-ons are installed only on Management Server, while others

are installed on both the MH and MS. The MH components are installed automatically as part of

the add-on install.

Since older versions of Storage Foundation Manager (SFM) add-ons are not compatible withVOM, is there an upgrade path available for these add-ons?

Storage Foundation Administration for UNIX: New version is available for download

Storage Foundation Administration for Windows: New version is available for download

Storage Reclamation and SF Product Version Reports: These are now included in the base

VOM product

Volume Migration: This has been replaced with Add-on for Storage Provisioning which is

available for download.

Are newer versions of Add-ons that were shipped for VOM 4.1 available?

Yes. See the VOM 5.0 add-ons download page.

Which VOM MS/MH versions are compatible with an add-on?

See the VOM add-ons compatibility matrix in the HSCL for Veritas Operations Manager 5.0.
http://go.symantec.com/vomhttp://go.symantec.com/vomhttp://go.symantec.com/vom


25/45




Security

What privilege or account do you need on a managed host (MH)?

To add a host into a domain, you need to know the root user and password of the MH. Once a host

is added, a secure channel is setup between the MS and the MH using PKI/PKCS mechanisms. After

the host is added to the domain, the password for the root user can be changed, and it does not

affect the operation of VOM.

Does xprtld allow for PAM, Active Directory, or LDAP-based authentication?

This is allowed for xprtld running on Management Server (MS). For the managed host, VOM allows

native OS authentication for end users.

What is a Security Group?

Security Groups provide a simple authorization mechanism to users of VOM.

A security group associates the authentication group and the authentication domain with a

predefined role. For the Admin role, you can associate Business Entities with the security group to

limit the authorized scope of a particular user.

What should be specified in the name of a security group?

This should be the name of the security group that you want to create. Make sure that the name ofthe authentication group and the name that you specify for the security group are the same.

Authentication group can be an OS group, LDAP/Authentication Domain group, or PAM/NIS

group.

How are privileges given on a cluster (Cluster administrator/operators) from VOM?

The cluster admin/operator roles are mapped to admin/operator roles on the business entity for acluster group type in VOM. See theVOM documentationfor more details.

How can I limit the visibility of the out-of-band storage information (Storage Insight Add-

on)?

You can use security groups to turn on, or turn off, the Storage Access privilege. Only users who

have this privilege can configure, view, and run reports on the out-of-band storage information.

Seedocumentation for more information.
https://sort.symantec.com/documentshttps://sort.symantec.com/documentshttps://sort.symantec.com/documentshttps://sort.symantec.com/documentshttps://sort.symantec.com/documentshttps://sort.symantec.com/documentshttps://sort.symantec.com/documentshttps://sort.symantec.com/documents


26/45




Administer Link for Host Operations

Why do I see the Administer link on the Host detail page as RED instead of GREEN even afterI add a managed host successfully to VOM Management Server (MS)?

After the host is successfully added to MS, the discovery process takes a minimum of 5 minutes to

update the database with the discovered details of the added host. As there is some time lag

between addition of the host and discovery completion, the Administer link turns RED until the

discovery is complete. Refresh the page after 5 minutes, and you should be able to see the

Administer link as GREEN.

How do I perform operations on Storage Foundation (SF) objects such as disk groups orvolumes?

Click the Administer link in the details page of the managed host on which the SF objects are

located. This takes you to the summary page of the objects that can be managed. Click on any

object category in that page and select the desired object.


27/45




Infrastructure

Is xprtld a Web server?

Yes. It is a modified embedded Web server based on the popular open source shttpd that listens

on port 5634. It only does authenticated SSL. It also has a built-in role-based authorizationmechanism.

Anything with the URL containing "admin" can only be accessed by the root user or an OS account

with admin privilege. All scripts within agent directory under /web/agent can be

accessed from other managed hosts as "root". These scripts are hardened and use Perl with Taintmode turned on.

Why does VOM use a separate Web server for the console when xprtld is also a Web server?

The xprtld Web server is a stripped down version of Web server which can only handle HTTP

requests. VOM uses Apache Tomcat for the console as it provides the necessary servlet containersfor the Java-based Web application to function.

What is Xprtlc ?

Xprtlc, also known as Xprtl Client, is a CLI interface that communicates with xprtld.

What is fault.pl?

There are several aspects of the system that VOM monitors as part of the VRTSsfmh package that

is installed on the managed host (MH). However, this is not all encompassing. Users of VOM can

choose to add their own discovery and exception detection scripts to augment our offering.

Fault.pl lets you indicate if a host is faulted or at-risk, and it shows up in the VOM dashboard. A

simple HTTP server monitoring script that runs off of cron can call fault.pl if it stops running, andclear it when it starts running again. See theVOM documentationfor more details.

What is xdist?

xdist is a powerful command that lets you push a script to managed hosts in the Management

Server domain, and run it. Typical use cases can include provisioning a server, updating a patch onmultiple computers, or detecting compliance-related anomalies in your environment. This

command can only be run as root on Management Server, and it runs commands as root on the

target systems. It is secure and arbitrary commands cannot be called unless you bypass it using

your own scripts. It uses a white listing mechanism for authorized commands similar to how sudo

operates. See theVOM documentationfor more details.
https://sort.symantec.com/documentshttps://sort.symantec.com/documentshttps://sort.symantec.com/documentshttps://sort.symantec.com/documentshttps://sort.symantec.com/documentshttps://sort.symantec.com/documentshttps://sort.symantec.com/documentshttps://sort.symantec.com/documents


28/45




What is xinfo?

xinfo allows you the options to get information about the state of the VOM infrastructure. See theVOM documentationfor more details.

What is xclusinfo?

xclusinfo interfaces with the VOM database and extracts information pertaining to the clusters and

their associated objects that are discovered in the datacenter.

What is vomsc?

The vomsc script lets you start, stop, or restart one or more Veritas Operations Manager services

on a UNIX-based or a Windows-based Management Server. If Management Server is configured for

HA, it is recommended that you use this script to prevent unintentional failovers. You can also use

the script to check the status of one or more services. The change in the state of the services istemporary. When the host is restarted, all the services are started again.

You can use the vomsc script to view the version of the VRTSsfmcs package and the VRTSsfmh

package that is installed on the Management Server host.

Can I access the VOM database directly?

No, VOM does not support this feature.
https://sort.symantec.com/documentshttps://sort.symantec.com/documentshttps://sort.symantec.com/documents


29/45




Reporting

What reports does VOM offer?

VOM offers reports in five different categories:

Storage Utilization:Reports on storage allocation, file system usage, resource mapping, data

protection, thin pool usage, enclosure storage allocation by host, solid-state disks, and

enclosure storage capacity.

Storage Reclamation:Reports to help uncover configured but unused storage infrastructure,

such as underutilized LUNs and file systems, LUNs not part of a disk group, Thin Provisioned

LUNS, and LUNs that are connected to multiple hosts.

Activity/Trend: Reports that focus on cluster-related data such as uptime analysis, cluster

activity, service group activity, resource activity, uptime analysis, failover summary, as well asresource fault trending.

Environment:Reports that provide an overview of the product usage and versions deployed

as well as underutilized licenses. Virtual IP usage displays all the virtual IP addresses

configured under VCS. Also includes reports on license lifecycle, product usage, underutilized

licensed, and patches.

Inventory: Reports that provide an overview of the status of different SF/HA components

deployed and configured in the environment, such as clustered hosts not monitored by VCS,

disks with single or no paths.

All reports can be scheduled to run across the entire domain managed by VOM, or for a Business

Entity.

Is VOM able to create comparisons between reports?

VOM does not have an explicit feature for this, but data from the different reports can be exportedfor further analysis.


30/45




Performance Statistics

What performance-related data does VOM track?

For hosts, VOM tracks available memory and average CPU load. For Disks, Volumes, File Systems,

and FC Initiators it monitors read and write statistics.

Where are performance statistics stored?

The performance statistics data is not stored in the Management Server (MS) database, but on the

managed host (MH) in the /var/opt/VRTSsfmh/stats/ directory. If the MS is not running, VOM

continues to collect historic performance statistics on each MH.

Are performance graphs supported on Windows managed hosts?

No, VOM does not support this feature.


31/45




Patches

Is VOM able to show which SF/HA patches a specific host requires?

VOM integrates with Symantec Operations Readiness Tool (SORT) to retrieve the latest

information about hot fixes, point patches, and release patches on a per-server basis. This

information provides a system administrator an efficient way to manage patches so that the server

environments are up-to-date.

The information includes details on the criticality of the patch, whether the patch installation

requires application downtime, whether the patch has kernel components, whether the patch

installation requires system reboot, and the number of customers who have downloaded the

patch. This information has to be present with the patch on SORT for VOM to show it.

Is VOM able to show available and applicable VOM patches and add-ons?

VOM will show the applicable VOM patches and the add-ons that are available on SORT. It does sobased on the environment (MS and MH) being managed by Management Server.

The information includes details on the criticality of the patch, whether the patch installation

requires application downtime, and the number of customers who have downloaded the patch.

This information has to be present with the patch on SORT for VOM to show it.

My network does not allow for direct Internet access. Can I still access the Symantec

Operational Readiness Tool (SORT) functionality?

Yes. VOM Management Server supports the use of a proxy server to connect to SORT.

Can I use VOM to deploy any type of patches including Veritas Storage Foundation patches?

Currently, you can use the package/patch functionality for VOM-specific updates and VBS

packages, and not for general-purpose usage.


32/45




VCS Fire Drill

How is HA fire drill executed?

HA fire drill is executed by invoking the action entry points (.VFD) on the cluster nodes where the

service group is offline. These are bundled and shipped with VCS. HA fire drill can be scoped to a

service group, a cluster, or a Business Entity.

Can HA fire drill functionality use the SORT checks?

No. We are evaluating how to consume the SORT checks in VOM.

How is DR fire drill executed?

DR fire drill is executed by bringing the fire drill (FD) service group online on the GCO clusters. An

option is provided to take the FD service group offline after successfully bringing it online. DR fire

drill can be scoped to a service group, a cluster, or a Business Entity.

To be able to run DR fire drills, a single VOM instance must manage all the GCO clusters.

Can I create fire drill service groups in VOM?

No. Currently, VOM does not support creating fire drill service groups.

What platforms are supported for HA and DR fire drills?

HA fire drill is supported only on UNIX platforms as the action entry points (.VFDs) are not

available on Windows.

DR fire drill is supported on all platforms.

Can I schedule fire drill runs?

Yes, both HA fire drills and DR fire drills can be scheduled. There is no default schedule as in

VCSMC, and it has to be set up manually. Existing schedules can be viewed and edited using the

Policies > Fire Drills > Schedules tab in the console.

How do I see the results of fire drill runs?

There are several locations in the VOM console where this is shown:

1) In the VOM console, under Policies > Fire Drills, the HA and DR fire drill tabs give the list of ALL

ongoing and completed runs.


33/45




2) Fire drill tab on the service group, cluster, and Business Entity detail pages show the same

information that is scoped to the selection.

3) Monitor > Tasks provides the details of the fire drill tasks.


34/45




Centralized Storage Foundation Administration

What are the Storage Foundation operations that are available through the centralizedconsole of Veritas Operations Manager?

Object Type of Operation

Disks Creating disk groups

Adding disks to a disk group

Recovering the faulted disks

Replacing a faulted disk

Removing disk from a disk group

Renaming disks in a disk group

Resizing disks in a disk group

Initializing disksRecovering a disk group

Deporting a disk group

Importing a disk group

Destroying a disk group

Disconnecting a disk

Creating volumes

Volumes Configuring instant volume snapshots

Configuring space-optimized snapshots for volumes

Configuring break-off mirror snapshots for volumes

Resizing volumesAdding mirrors to volumes

Removing the mirrors of a volume

Restoring data from the snapshots of volumes

Refreshing the snapshot of a volume

Configuring a schedule for a volume snapshot refresh

Adding a snapshot volume to a refresh schedule

Modifying the refresh schedule for a volume snapshot

Removing the schedule for a volume snapshot refresh

Deleting volumes

Dissociating snapshot

Reattaching a snapshotStopping a volume

Recovering a volume

Reactivating a volume

Restoring a volume

Creating file systems

File Systems Mounting a non clustered file system on a host

Mounting a clustered file system on a host


35/45




Unmounting a non clustered file system from a host

Unmounting a clustered file system

Enabling a change log

Disabling a change log

Removing a change log

Synchronizing a change log

Defragmenting a file system

How do the centralized Storage Foundation operations differ from the operations available

through the UNIX and the Windows Administration add-ons?

Navigating through theAdministerlink to perform various operations on Disks, Disk groups,Volumes and File systems is not require

Documents

B-Veritas Operations Manager 5 0 Faq or.en-us