09-2

KYRON 2010.01

4210-01

AXLE (IOP)

4210-01AXLE (IOP)OVERVIEW AND OPERATION PROCESS1. OVERVIEW

The 2007 Kyron is equipped with different types of front and rear axles. As the IOP axle is installed, AWD (All Wheel Driver) transfer case and the switchable engine mount are installed.

This vehicle is equipped with front IOP axle system and IRDA with new technology.

09-3

AXLE (IOP)KYRON 2010.01

4120-01

The IOP front axle is integrated with the engine oil pan so that the engine mounting height is lowered and the engine vibration is reduced.

There is not much different in the rear axle system. However, as EAS and EPB with new technology are adopted, suspension specification and rear axle module have been changed.

IOP axle

Front Axle

Conventional axle (Non IOP axle)

5-link type rear axle (semi floating type: integrated type)

Independent suspension type rear axle (IRDA)

Rear Axle

09-4

KYRON 2010.01

4210-01

AXLE (IOP)

2. WHEEL ALIGNMENT

Actions▶

Before performing the wheel alignment, unload all the items from the vehicle.When setting the wheel alignment tools, the above adjustment values should be followed.The difference of the front camber and the caster at both ends should be below 30' (0.5°).

1.2.3.