2
AWC129 All-Weather Compact 2-Way Coaxial Loudspeaker with 12" LF Key Features: Highly weather-resistant IP56 rating Consistent 90° x 90° broadband pattern control Components: • 300 mm (12 in) woofer with Kevlar-reinforced cone and 75 mm (3 in) voice coil. • 25 mm (1 in) exit compression driver with unique patented design and high temperature polymer diaphragm. Extraordinary clarity for speech, with extended frequency response for music. Advanced high-slope crossover network for constant coverage and smooth, natural midrange. 400 Watt power handling (average continuous pink noise) with high sensitivity provides high SPL capability. High-power passive crossover network. Overload protection 55 Hz – 20 kHz frequency response. 200 Watt 70V/100V multi-tap (built-in transformer) or direct 8low-impedance. Applications: The AWC129 is a compact, coaxial-driver, 2-way, highly weather-resistant full-range loudspeaker system which is ideal for speech and music in a wide variety of applications, including sports facilities, racetracks, stadiums, fairgrounds, rodeos, skating rinks, themed entertainment venues, cruise ships, water parks, outdoor background music/paging systems, swimming pools, and a wide variety of other outdoor or indoor venue types. The AWC129 is comprised of a high-power coaxial 300 mm (12 in) low frequency driver and 25 mm (1 in) high frequency compression driver. The co-axial design utilizes a unique tapered pole- piece design and transitions to the cone of the low frequency driver as a large diameter pattern control horn for the high frequencies, both eliminating high-frequency beaming which is common among this category of speaker and extending pattern control to the lowest possible frequencies. The result is a coaxial speaker with wide, extremely consistent 90° coverage on a broadband basis. Component features include a Kevlar-reinforced low frequency cone for reliability, well-damped surround for smooth frequency response, high temperature 75 mm (3 in) voice coil and a reduced distortion design through saturated-gap magnet geometry. The high frequency compression driver features a unique patented design, high temperature polymer diaphragm, and fluid-cooling for high output levels with low distortion. The paintable enclosure is constructed of thick ABS plus fiberglass and is heavily braced to maximize low-frequency performance. The corrosion-resistant zinc-rich extra-thick powder coated steel grille is backed with open cell foam and high thread-count mesh, providing excellent protection in the harshest environments. The system is rated IP-56, per IEC529 when installed at minimum 5° down-tilt. The system is equipped with a 200W 70V/100V multi-tap transformer. Connection is made via outdoor-rated terminals in a recessed terminal cup. A protective terminal compartment cover is included, along with gland nut, which forms a water-tight seal with round-jacketed cable having The high frequency compression driver features a unique patented design, high temperature polymer diaphragm, and fluid-cooling for high output levels with low distortion. A heavy-duty weather-capable zinc-rich, thick powder coated U-type mounting bracket is included. Specifications: System: Frequency Range (-10 dB) 1 : 55 Hz – 20 kHz Frequency Response (±3 dB) 1 : 80 Hz – 20 kHz Coverage Pattern 2 : 90° x 90° Directivity Factor: 10.1 (1 k – 16 kHz) Directivity Index (DI): 9.5 dB (1k – 16 kHz) Long-Term System Power Rating (IEC) 3 : 400 W (1600 W peak), 2 hrs. 250 W (1000 W peak), 100 hrs Sensitivity (2.83V @ 1m): 96 dB (Ave. 80 Hz – 20 kHz) Maximum SPL 4 : Direct 8: 122 dB (peaks of 128 dB) 200 W Tap: 119 dB Crossover Network: 1.5 kHz, 3rd order (18 dB/oct) high-pass plus conjugate to HF, 2nd order low-pass to LF Nominal Impedance: 8 ohms Transformer Taps: 70V: 200W, 100W, 50W, 25W 100V: 200W, 100W, 50W Transducers: Low Frequency Driver: Kevlar-reinforced cone with weather treatment, 75 mm (3 in) voice coil. High Frequency Driver: 25 mm (1 in) diaphragm and voice coil diameter, high temperature polymer diaphragm, patented design, fluid-cooling. HF Driver Protection: Minimum audibility SonicGuard™ HF overload protection Physical: Enclosure: ABS with Glass enclosure, heavily braced Attachment: Two M10 (fine-thread) points for included U-bracket. M6 secondary safety attachment point on back panel. Grille: Corrosion-resistant zinc-rich extra-thick powder coated steel grille, 3-layer assembly with foam and woven poly mesh backing. Input Connection: CE-compliant covered barrier strip terminals. Barrier terminals accept up to 8 mm outside 4 mm inside open-lug (#6 or #8) plus bare wire up to 2.5 mm 2 (12 AWG) wire or spade lugs. Terminal compartment cover equipped with gland nut that forms water-tight seal with round- jacketed cables with outside diameters between 4.0 mm (0.16") and 9.0 mm (0.36") Environmental: IP56 per IEC529, with a minimum 5° downward aiming angle. Exceeds Mil Spec 810 for humidity, salt spray, temperature & UV, and ASTM G85 for salt spray (168 hrs). Dimensions: 402 x 402 x 445 mm (15.8 x 15.8 x 17.5), cabinet 470 mm (18.5 in) depth with gland nut 542 mm (21.4 in) including bracket extending to back Colors: Available in gray (similar to Pantone 420C) and black (-BK) Net Weight: 15.9 kg (35.0 lb), 18.9 kg (41.5 lb) with u-bracket Shipping Weight: 23.4 kg (51.5 lbs) Included Accessories: U-bracket, matches loudspeaker color (gray or black), zinc-rich extra- thick powder coated, steel. 1 Full-space (free-field) 2 Average 1 kHz to 10 kHz 3 IEC standard, full bandwidth pink noise with 6 dB crest factor. 4 Calculated based on power rating and measured full-space sensitivity. JBL continually engages in research related to product improvement. Changes introduced into existing products without notice are an expression of that philosophy. Professional Series

AWC129 - JBL Professional · The AWC129 is a compact, coaxial-driver, 2-way, ... ASTM G85 for salt spray (168 hrs). Dimensions: 402 x 402 x 445 mm (15.8 x 15.8 x 17.5), cabinet

  • Upload
    dohanh

  • View
    215

  • Download
    0

Embed Size (px)

Citation preview

AWC129 All-Weather Compact 2-Way CoaxialLoudspeaker with 12" LF

Key Features: Highly weather-resistant IP56 rating

Consistent 90° x 90° broadband pattern control

Components:• 300 mm (12 in) woofer with Kevlar-reinforced

cone and 75 mm (3 in) voice coil. • 25 mm (1 in) exit compression driver with

unique patented design and high temperaturepolymer diaphragm.

Extraordinary clarity for speech, with extendedfrequency response for music.

Advanced high-slope crossover network forconstant coverage and smooth, natural midrange.

400 Watt power handling (average continuous pinknoise) with high sensitivity provides high SPLcapability.

High-power passive crossover network.

Overload protection

55 Hz – 20 kHz frequency response.

200 Watt 70V/100V multi-tap (built-in transformer)or direct 8Ω low-impedance.

Applications:The AWC129 is a compact, coaxial-driver, 2-way,

highly weather-resistant full-range loudspeakersystem which is ideal for speech and music in awide variety of applications, including sportsfacilities, racetracks, stadiums, fairgrounds, rodeos,skating rinks, themed entertainment venues, cruiseships, water parks, outdoor backgroundmusic/paging systems, swimming pools, and a widevariety of other outdoor or indoor venue types.

The AWC129 is comprised of a high-powercoaxial 300 mm (12 in) low frequency driver and25 mm (1 in) high frequency compression driver.The co-axial design utilizes a unique tapered pole-piece design and transitions to the cone of the lowfrequency driver as a large diameter pattern controlhorn for the high frequencies, both eliminatinghigh-frequency beaming which is common amongthis category of speaker and extending patterncontrol to the lowest possible frequencies. Theresult is a coaxial speaker with wide, extremelyconsistent 90° coverage on a broadband basis.

Component features include a Kevlar-reinforcedlow frequency cone for reliability, well-dampedsurround for smooth frequency response, hightemperature 75 mm (3 in) voice coil and a reduceddistortion design through saturated-gap magnetgeometry. The high frequency compression driverfeatures a unique patented design, hightemperature polymer diaphragm, and fluid-coolingfor high output levels with low distortion.

The paintable enclosure is constructed of thickABS plus fiberglass and is heavily braced tomaximize low-frequency performance. Thecorrosion-resistant zinc-rich extra-thick powdercoated steel grille is backed with open cell foamand high thread-count mesh, providing excellentprotection in the harshest environments. The systemis rated IP-56, per IEC529 when installed atminimum 5° down-tilt.

The system is equipped with a 200W 70V/100Vmulti-tap transformer. Connection is made viaoutdoor-rated terminals in a recessed terminal cup.A protective terminal compartment cover isincluded, along with gland nut, which forms awater-tight seal with round-jacketed cable havingThe high frequency compression driver features aunique patented design, high temperature polymerdiaphragm, and fluid-cooling for high output levelswith low distortion.

A heavy-duty weather-capable zinc-rich, thickpowder coated U-type mounting bracket isincluded.

Specifications:System:

Frequency Range (-10 dB)1: 55 Hz – 20 kHzFrequency Response (±3 dB)1: 80 Hz – 20 kHz

Coverage Pattern2: 90° x 90°Directivity Factor: 10.1 (1 k – 16 kHz)

Directivity Index (DI): 9.5 dB (1k – 16 kHz)Long-Term System Power Rating (IEC)3: 400 W (1600 W peak), 2 hrs.

250 W (1000 W peak), 100 hrsSensitivity (2.83V @ 1m): 96 dB (Ave. 80 Hz – 20 kHz)

Maximum SPL4: Direct 8Ω: 122 dB (peaks of 128 dB)200 W Tap: 119 dB

Crossover Network: 1.5 kHz, 3rd order (18 dB/oct) high-pass plus conjugate to HF, 2ndorder low-pass to LF

Nominal Impedance: 8 ohmsTransformer Taps: 70V: 200W, 100W, 50W, 25W

100V: 200W, 100W, 50WTransducers:

Low Frequency Driver: Kevlar-reinforced cone with weather treatment, 75 mm (3 in) voicecoil.

High Frequency Driver: 25 mm (1 in) diaphragm and voice coil diameter, high temperaturepolymer diaphragm, patented design, fluid-cooling.

HF Driver Protection: Minimum audibility SonicGuard™ HF overload protectionPhysical:

Enclosure: ABS with Glass enclosure, heavily bracedAttachment: Two M10 (fine-thread) points for included U-bracket. M6 secondary

safety attachment point on back panel.Grille: Corrosion-resistant zinc-rich extra-thick powder coated steel grille,

3-layer assembly with foam and woven poly mesh backing.Input Connection: CE-compliant covered barrier strip terminals. Barrier terminals accept

up to 8 mm outside 4 mm inside open-lug (#6 or #8) plus bare wireup to 2.5 mm2 (12 AWG) wire or spade lugs. Terminal compartmentcover equipped with gland nut that forms water-tight seal with round-jacketed cables with outside diameters between 4.0 mm (0.16") and9.0 mm (0.36")

Environmental: IP56 per IEC529, with a minimum 5° downward aiming angle.Exceeds Mil Spec 810 for humidity, salt spray, temperature & UV, andASTM G85 for salt spray (168 hrs).

Dimensions: 402 x 402 x 445 mm (15.8 x 15.8 x 17.5), cabinet470 mm (18.5 in) depth with gland nut542 mm (21.4 in) including bracket extending to back

Colors: Available in gray (similar to Pantone 420C) and black (-BK)Net Weight: 15.9 kg (35.0 lb), 18.9 kg (41.5 lb) with u-bracket

Shipping Weight: 23.4 kg (51.5 lbs)Included Accessories: U-bracket, matches loudspeaker color (gray or black), zinc-rich extra-

thick powder coated, steel.1 Full-space (free-field)2 Average 1 kHz to 10 kHz3 IEC standard, full bandwidth pink noise with 6 dB crest factor.4 Calculated based on power rating and measured full-space sensitivity.

JBL continually engages in research related to product improvement. Changes introduced into existing products without noticeare an expression of that philosophy.

Professional Series

80579_JBL_AWC129_80579_JBL_ACW129 11/1/12 7:54 AM Page 1

SS AWC129CRP11/12

AWC129 All-Weather Compact 2-Way Coaxial Loudspeaker with 12" LF

20 100 1000 10000 20000Frequency (Hz)

65

75

85

95

105

0

14

28

42

56

SPL

(dB)

Ohm

s

20 100 1000 10000 20000Frequency (Hz)

-30

-20

-10

0

10

Atte

nuat

ion (d

B)

0 deg10 deg20 deg30 deg40 deg50 deg60 deg70 deg80 deg

Beamwidth

Frequency Response and Impedance Off-Axis Frequency Response

Directivity Index:

20 100 1000 10000 20000Frequency (Hz)

0

10

20

1

10

100

Dire

ctivit

y Ind

ex (D

I), d

B

Dire

ctivit

y Fac

tor (

Q)

JBL Professional8500 Balboa Boulevard, P.O. Box 2200Northridge, California 91329 U.S.A.© Copyright 2012 JBL Professionalwww.jblpro.com

542[21.4]

470[18.5]

445[17.5]

191[7.5]

31 [1.2]

28[1.21]

126 [5.0]

10.2 [R.40]

12.7 [R.50]

102 [4.0]

12.7 [R.50]

28 [1.1]

3.8[R.15]

61 [2.4]

96 [3.8]

64[2.5]

24[0.9]

25[1.0]

402[15.8]

402 [15.8]

Bracket Rotational Range = ±90°

90º

45º

78[3.1]

252[9.9]

367[14.5]

389[15.3]

352[13.9]

M6 secondary safety attachment point

Dimensions

Dimensions in mm (in)

Attaching U-Bracket to Cabinet

M10 Bolt

Lock Washer

Flat Washer

Friction Gasket

Terminal Compartment

Gland nut for round jacketed cable between 4.0mm (0.16”) and 9.0mm (0.36”) O.D.

80579_JBL_AWC129_80579_JBL_ACW129 11/1/12 7:54 AM Page 2