AVIN Android 4.1.1 Operating Manual_01!07!2015

7/24/2019 AVIN Android 4.1.1 Operating Manual_01!07!2015

1/25

C 2014All Rights Reserved

www.avinusa.com


2/25

Thank you for choosing this unit as your navigator.

Please read through these instructions so you will know how to operate

your model properly. After you have finished reading the instructions,

keep this document in a safe place for future reference.


3/25

\\ 01

Content

Precautions - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 3

Specifications - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 5

1. Basic Operations - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 7

1-1 Desktop - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 7

2. Features - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 10

2-1 Radio - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -10

2-2 Disc - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -12

CD mode - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -13

VCD mode - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -14

DVD mode - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -15

2-3 USB / SDHC - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -16

USB / SD Music - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -16

USB / SD Photo - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 17

USB / SD Video - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 18

2-4 File Manager - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 19

2-5 Bluetooth - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 20

Pairing - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 20

Disconnect - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 20

Hands-free calling - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -21

Bluetooth audio stream - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 23

2-6 iPod - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 24

2-7 Auxiliary Equipment - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -26

Auxiliary audio/video equipment - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 26

Rear view camera - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 26


4/25

\\ 0302 //

2-8 GPS Navigation - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 27

2-9 OBD2 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 28

2-10 The browser - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 30

2-11 The use of touch screen - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 30

3. Settings - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 32

3-1 Wireless and Internet - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -32

3-2 Equipment - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 33

3-3 Persona - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -35

3-4 Individual account - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 38

3-5 System - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 38

3-6 Car Settings - - - - - - - - - -- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 39

3-7 Factory Settings - - - - - - - - - -- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 414. Troubleshooting - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 43

Notes on installation: Its highly recommended that the unit be installed by a professional car audio

installer.

This software requires that the navigation system is properly connected to your

vehicles parking brake and depending on your vehicle, additional installation

may be required.

This device is used on cars with 12V power supply (grounding wire is required).

Improper installation may cause battery drain or a short circuit. The cars battery should be disconnected before installation to avoid any

electrical problems.

If the unit does not power on double check all power connections and power

fuses. Double check that your cars battery is not low and recharge it if necesary.

Protect the unit surface from damage.

Do not expose the unit to any moisture or liquid as it could cause an electrical

shock and damage the unit or the cars electrical system.

Be sure to fix the unit securely to car before operation.

Notes on safety:

Comply with your local traffic rules, laws, and regulations regarding proper use

of this device.

Do not watch or operate the unit while driving, as it may lead to distraction and

cause an accident. Park your car in a safe place to watch or operate the unit.

Do not use the setup feature or any other function which could divert your

attention from the road.

When reversing your car, be sure to look back and watch your surroundings

carefully for your safety. Do not depend on the rear view camera exclusively.

will not be held liable for any misuse or accidents related from the

misuse of this device, or from misuse of any of its accessories.

NOTE

S

The photos and figures in this manual are for reference only.

The screens shown in the examples may differ from actual

screens, which may be changed without notice for

performance and functional improvements.

Pr

ecautions


5/25

\\ 0504 //

Sp

ecification

Pr

ecautions

Operating precautions

Basic Specification:

Power ------------------------- DC12V

Resistance ------------------- 4

Max Power Output --------- 4X45W

Volume Control ------------- 15 dB (Bass 100Hz, Treble 10KHz)

DVD Disc

Compatible Discs ---------- MPEG4.DVD.Super VCD.MP3.CD-R.

CD-RW Picture-CD

Video Standard ------------- Auto/NTSC/PAL

Installation Angle ----------- 0--+/-30

Video

Video Mode ------------------ 43 Mailbox Mode/ 43 Full screen /16:9 Modes

Video Output ---------------- 1.0Vp-p.75ohms

Horizontal Resolution ----- 500

Product features

Operating System: Android 4.1.1

1.78 GHZ Dual-core processor

1 GB RAM 1024 X 600 HD resolution display

Multi-touch capacitive screen

Supports HD Videos up to 720P and 1080P

Supports SD cards up to 128 GB

Supports WiFi and 3G USB Modem

Bluetooth Handsfree, A2DP, AVRCP

Supports Bluetooth OBD2

Please read the following precautions before use, and kindly comply with all of them

to operate it in proper ways for the best use of the unit.

1. Be careful when installing third party application as they can cause the system to

become unstable. We do not provide any support for third party application or

guarantee any third party apps to be compatible with the unit.

2. If you run into software issues you can restore the unit back to Factory Default.

To restore Factory Default go to: (Settings-Advanced settings-Privacy-Restore

factory default). (Note: All the softwares installed by the user, settings, and data

will be deleted).

3. Start Time: Cold boot time 20-25 seconds, Warm boot time 2-3 seconds from

standby mode. The system will go into standby mode (standby time can be

adjusted in Settings menu) after turning off the car and removing the key out of

the ignition. The unit can be switched ON within 2-3 seconds from standby mode.

Setting the standby time shorter or using cold boot mode would save the most battery.

Only use standby mode if you have a new or strong car battery. (Page 40)

4. We warrant the Device against defects in materials and workmanship under

ordinary consumer use for one year from the date of original retail purchase.

During this warranty period, if a defect arises in the Device, and you follow the

instructions for returning the Device, we will, at our option, to the extent permitted

by law, either (i) repair the Device using either new or refurbished parts,

or (ii) replace the Device with a new or refurbished Device that is equivalent to the

Device that is to be replaced. This limited warranty applies, to the extent permitted

by law, to any repair, replacement part or replacement device for the remainder of

the original warranty period. This limited warranty applies only to hardware

components of the Device that are not subject to accident, misuse, neglect, fire

or other external causes, alterations, repair, or commercial use. The limited

warranty covers the original purchaser and original receipt of purchase will be

required for warranty claims. If the security seal on the unit is broken or if there is

any tampering of the unit hardware or software all warranty will be void.


6/25

\\ 0706 //

Sp

ecification

Audio

Line-out Max Output ------------------- 2V rms/10k (20Hz-20KHz)

SUB-out Max Output ------------------- 2V rms/10k (20Hz-120Hz)

Frequency Range ----------------------- 20Hz-20KHz

S/N Ratio ---------------------------------- 90dB

Dynamic Scope ------------------------- 80dB

AM Tuner

AM Frequency Range ----------------- 522-1620KHz (Euro/ China)

Intermediate Frequency---------------- 450KHz

Usable Sensitivity-20dB)------------ 20dBV

FM Tuner

FM Frequency Range ------------------ 87.5-108KHz

Intermediate Frequency --------------- 10.7KHz

Usable Sensitivity-30dB)------------ 3 dBV

S/N Ratio --------------------------------- 60dBStereo Separation----------------------- 30dB1KHz

Frequency Response ------------------ 30-15000Hz

GPS Receiver

DC Voltage-------------------------------- 3V-5V

DC Current-------------------------------- 10mA Max

Center Frequency----------------------- 1575.42 MHz1MHz

V.S.W.R------------------------------------ 1.5:1 (Voltage Standing Wave Ratio)

Band Width-------------------------------- 5MHz

Impedance-------------------------------- 50 ohm

Peak Gain---------------------------------- > -4dBic Based on 7x7cm ground plane

Gain Coverage---------------------------- > -4dBic at -90


7/25

\\ 0908 //

D

esktop

D

esktop

Wallpaper edit, two groups

of preset wallpapers:

* Live Wallpapers

* Wallpapers manager

Desktop edit mode:

* Move the position of the Apps,

Press & hold any of the icons, drag it to

the place you want, and release it.

* Uninstall third party Apps, press & hold the third party Apps icon, drag it to

Trash can then release, the system will pop up an option:

Simply click Uninstall to uninstall that App, click Cancel to close it.

System settings

3. Same as Android BACK key* Click it while in any of the system Apps (like Radio, DVD, USB/SD, BT) ,

system will close the display with the app running in the background.

Apps.

4. Clock: Click this icon to enter clock / alarm interface.

5. Network connection status bar

3G, WiFi & Bluetooth connections status will be displayed here.

Long press and hold any empty area on the Home Screen to edit the Home

Screen pages.

Notifcation Status Bar

On any screen touch the top of the screen and slide down to reveal thenotification screen. The notification screen will display Volume, WIFI Switch,

Brightness, Restart, Standby options.

Installing Application Apps

You can download and install apps directly online from the Google Play store

or install apps stored on your SD card or USB drives.


8/25

\\ 1110//

F

eatures

F

eatures

2-1. Radio

1 MENU: Press it to display the menu bar

Press Go To to manually input a station frequency.

Auto Search and scans radio stations, any operation will stop scanning, Radio will play the first station automatically once scanning is finished.

Search Play scans radio stations automatically and play found station

for about 5 seconds then goes on scanning. Any operation will stop

scanning. Radio will play the first station automatically once the scanning finish.

Radio mode.

Local mode: Receive only local station which has strong signals.

DX mode: Be able to receive remote station.

Exit and closes the Radio app

Features 2. Visualizer Click to switch to different visualizer modes.

3. Equalizer / Fade & Balancer

4. Favorite stations:

P1- P6: Press any of those icons for 3 seconds, or press the current station and

drag it to one of those positions, then the current station will be stored into that

position.

5. Band:Press to switch the band between FM1, FM2, FM3, AM1 and AM2

6. Seek down & Seek up: Scanning stops when the unit receives a

station. Repeat this procedure until the desired station is received.

7. Step up & Step down :Adjust the frequency incrementally.


9/25

\\ 1312 //

F

eatures

F

eatures

2-2. Disc

DVD Video

DVD

*1 Audio files can also be stored.

*2 Video files can also be stored.The following media files are also supported: MP3, WMA, AAC, WAV, Xvid, WMV,

MPEG1/2/4, AVC, AVI, AFS

Insert the Disc (label side up) and playback will start automatically.

Random play, press to switch on random play mode,

press again to switch off.

Repeat mode: Rep, Single repeat, no repeat

DVD-R*1/DVD-R DL*1/DVD-RW*1 (Video mode/VR mode)

DVD+R*1/DVD+R DL*1/DVD+RW*1

Video CD (Ver. 1.0/1.1/2.0)VCD

CDAudio CD

CD-ROM*2/CD-R*2/CD-RW*2

Disc symbol Disc format

Previous & Next: Touch to skip a track.

Play & Pause

Track list: click the desired track number to play.

1. CD mode


10/25

\\ 1514 //

F

eatures

F

eatures

2. VCD mode

Menu: Repetition setup (A-B interval repeat),

Chapter to jump

Setting: Manual adjust display

Eject

PBC Menu: Click it, the PBC Menu appears.

Previous & Next: Touch to skip a chapter/ track/scene. Touch and hold

momentarily to reverse/fast-forward the video; and then repeatedly to switch the

speed ( 2, 4, 8, 16). To cancel, touch .

Touch and hold to reverse/fast-forward the video track.

During pause, press & hold to play the video in slow motion. To cancel, release

the key.

Play & Pause: Touch to pause/ resume play after pause.

Channel ( Left, Right, Mono, Stereo).

3. DVD Mode

Menu: Chapter to jump

Click to return to the DVD to the main menu

Setting: Manual adjust display

Eject

Subtitle Switching

Previous & Next: Touch to skip a chapter/ track/scene file. Touch and

hold momentarily to reverse/fast-forward the video; and then repeatedly to switch

the speed ( 2, 4, 8, 16). To cancel, touch play.

Touch and hold to reverse/fast-forward the video track.During pause, press & hold to play the video in slow motion. To cancel, release

the key.

Play & Pause: Touch to pause/ resume play after pause.

Voice ( 5.1 CH, 5.1 DTC CH)


11/25

\\ 1716 //

F

eatures

F

eatures

Supported audio formats: MP3, APE, M4A, WAV, AMR, AWB, ACC, FLAC

MID MIDI, XMF, RTTTL, RTX, OTA, WMA, RA, MKA, M3U,PLS.

Supported Video formats: MPEG1/2/4, DivX, XviD, MP4, MOV, M4V, 3GP,

3GPP, 3G2, 3GPP2, AVI, DIVX, WMV, ASF, FLV, RM, MKV.

Supported picture formats: JPEG, JPG, GIF, PNG, BMP, WBMP.

* Connect the USB device to USB port, or insert the micro SD card into the SD

card slots

* Press HOME , then touch / , the interface turns up as below:

1. USB /SD Music

Touch option, the unit will display all the folders where the music files werestored, click one of those folders to open it, scroll up and down to select the

desired track, double click the track to play.

Music playback

Touch / to play or resume play after pause

Touch / to skip a track file

Repeat : * Repeat all: Repeats the all current group;

* Repeat 1: Repeats the current music file;

* Repeat off: Returns to normal play mode

2-3. USB / SDHC

Random play

* Random on: Plays all files in current list in random order

* Random off: Returns to normal play mode

Visualizer

* Touch the icon, the normal playback screen will change to playback screen

with Visualizer

EQ & Fade/Balance settings.

Track list, during playback you can scroll the track list left or right to select the

desired track.

2. USB /SD Photo

Click the android home screen Photo icon, into the view images in a storage

device


12/25

\\ 1918 //

F

eatures

F

eatures

Photo viewing.

Touch to set the

current picture as wallpaper.

Touch / to skip a photo file

Touch to play photos in that

folder automatically

Rotates photo clockwise.

3. USB / SD VideoTouch Video option, the unit will display all the folders where video files are

stored, click one of those folders to open it, scroll up and down to select the desired

video, double click to play.

Video playback

Touch to play or resume play after pause

Touch to skip a track file

Visualizer

* Touch the icon, the normal playback screen will change to playback screen

with Visualizer;

* Visualizer options: Gate/Balloon/Glow/Animal/Albums/Graffiti/Ink/Random

EQ & Fade/Balance settings.

2-4. File Manager

1. Viewing files click File Manager on desktop.

Select the memory type, press the USB flash memory or SD Card accordingly

to view the file folders there.

Click the folder to view the subfiles.

2. Managing files

Select the file, then touch MENU, managing option appears: Copy, Move,

Delete.

Press & hold a file track for a while, then managing option appears: Copy,

Move,Delete.

3. Installing the third party applications via File Manager*Put the third party applications APK files into a SD card or USB flash memory

*Enable unknown source in settings menu

*Connect the memory device, locate the APK you would like to install in File

manager then click it, then follow the on screen prompts to install the App.

Notes:

We do not provide support for any third party applications/software or guarantee or

imply that any third party applications/software will be compatible with any of our

devices. Please contact the third party software developer for support.


13/25

\\ 2120 //

F

eatures

F

eatures

2-5. BluetoothBluetooth allows this unit to be detected and connected by the other Bluetooth

devices ( cellphone, tablet, etc), hands-free calling and Bluetooth audio steaming.

Basic procedure of the bluetooth function

Pairing & connecting

When connecting Bluetooth devices for the first time, mutual registration is required.

This registration (pairing) is required only for the first time, as this unit and the other

devices will recognize each other automatically next time. After pairing is made,

connect this unit and the Bluetooth device.

Depending on the device, connection is automatically made along with the pairing.

Hands-free calling / audio streaming

You can make/receive hands-free calls, or listen to stream audio through this unit.

Note: If you delete the device registration (unpair) from this unit, you need to

perform pairing again.

1. Pairing procedureTouch Bluetooth icon to enter Bluetooth interface, then the Bluetooth signal is

activated and discoverable, the units Bluetooth information

(Device name: XX-XXXX, pair code) will be displayed on the interface and this unit

is ready to detected by the other Bluetooth devices.

On your other Bluetooth device settings menu

do a Bluetooth search/scan for this

device.

If pair code input is required on

the display of the device, input 0000,

or 1234

2. DisconnectTouch the connection options

will pop up.

Touch disconnect, touch connect to reconnect.

Tips: You can also disconnect from your other Bluetooth device directly.

Notes

1. While already connected to a Bluetooth device, this unit cannot be detected

from another device. To enable detection, disconnect the current connection.

2. It may take time to search or connect.

3. Depending on the device, the connection confirmation display may appear

before inputting the pair code.4. The time limit for inputting the passcode differs depending on the device.

5. This unit cannot be connected to a device that supports only HSP

(Head Set Profile).

6. When the ignition is turned to on with the Bluetooth signal activated, this unit

searches for the last-connected Bluetooth device, and connection is made

automatically if possible.

3. Hands-free callingOnce the unit is connected to your cellular phone, you can make/receive

hands-free calls using the units Bluetooth apps touch screen UI.

Making calls* By dialing a phone number

1. Touch , the virtual keyboard appears, enter the phone number by touching

the number keys accordingly.

2. Touch to make the call.


14/25

\\ 2322 //

F

eatures

F

eatures

* By Call records or Contacts

If you allow the system to sync with the cell phones contacts and records, you can

make the call out by those two lists.

-Call records

Call records: Missed call , Incoming call , Outgoing call ,

The unit will store the last 20 calls in each list, allowing you to select one quickly from the lists.

1. Touch / / , then the list of call records appears, you can slide the list

up and down.

2. Select the desired item in the list.

3. Touch that item, the call will be made.

-Contacts

1. Touch the contacts icon to display the contact list.

2. Select the desired contact.

In the contact list, you can scroll up and down to search the desired contact.

3. Touch the desired number and the call will be made.

Receiving callsYou will be able to receive phone calls when your cellular phone is paired and

connected.

*To answer the call, touch .

*To adjust the ringtone volume, turn Volume knob while receiving a call,

*To reject a call touch .

Operations during a call

* To adjust the callers voice volume, turn the Volume knob.

* To transfer the current call to the cell phone, touch , to transfer back to the unit

touch again.* To mute the microphone, touch .

* To end a call, touch .

Note:

* The ringtone and the speaker's voice are output only from the front speakers.

* Depending on the cell phone, connection may be cut off when call transfer is

attempted.

4. Bluetooth Audio Streaming

If the other Bluetooth device supports A2DP(Advanced audio distribution profile),

you can stream audio playback to this unit.

1. Connect this unit with the Bluetooth device (Refer to pairing procedure).

2. Touch , the Bluetooth Audio

display appears.

3. This unit allows you to control the

playback of the Bluetooth device

* During the playback, touch to

pause, touch to resume.

* Touch / to skip a track file.


15/25

\\ 2524 //

F

eatures

F

eatures

2-6. iPodThis unit allows you to connect iPod devices via supplied specific USB cable,

You can connect to the following iPod models. Update your iPod devices to the

latest software before use.

Made for

iPod touch (1st-4th Generation)

iPod classic

iPod Nano (1st-6th generation)

iPhone 4/4S

iPhone 3G/3GS

iPhone

Note: This unit does not recognize multiple iPods.

Connecting an iPod

1. Reduce the volume on the unit, if the iPod is off, turn it on.

2. Connect the iPod to the unit with the supplied iPod cable.

3. Adjust the volume on this unit.4. Touch HOME, then touch

Listing tracks

1. Selecting a track

You can list files in your iPod by

Artist , albums ,tracks , and select a desired one to play.

2. During playback, touch .

The list of categories or files from the currently played item appears.

3. Touch the desired item to Play.

Playback operation1. During the playback, touch to pause, touch to resume.

2. Touch / to skip a track file.

3. Random play mode.

4. Touch to switch repeat mode.

5. EQ & Fade/Balance settings.6. Touch , the Visualizer appears, touch to switch different Visualizer mode.

To disconnect the iPodStop playback, then disconnect. Do not disconnect during playback, as data in

the iPod may be damaged if the iPod is disconnected while still playing.

NoteThis unit cannot recognize iPod / iPhone via USB ports or USB hub.

Tips* When the ignition key is turned to the ACC position with the unit on, the iPods

battery will be recharged.

* If the iPod is disconnected during playback, No Device appears on the

display of the unit.


16/25

\\ 2726 //

F

eatures

F

eatures

2-7. Auxiliary Input1. Auxiliary audio/video Input

This unit allows you to connect auxiliary equipments such as MP3/ MP4,Cell

phone and external TV box, etc.

* Settings

. Touch HOME, then click AUX, the AUX IN playback display appears.

. Playback operation is controlled via the external auxiliary device itself.

* Adjusting the volume level

Be sure to adjust the volume for each connected device before playback, turn

volume to proper level.

Reduce the volume on the unit.

Touch HOME, then click AUX, the AUX IN playback display appears.

Touch MENU, the menu appears, then touch Adjust input level.Set your usual listening volume on the unit.

Touch /+ repeatedly to adjust the level.

The level is adjustable in single steps, between 8 and +18.

2. Rear view camera

By connecting an optional rear view camera to the CAMERA terminal, the unit

allows you to display the camera view on screen to assist you while reversing or

parking the car. The video from the rear view camera appears automatically

when the shift lever is set to the Reverse (R) position.

Note:

When backing up your car, be sure to look back, use the rear view mirrors,

and watch your surrounding carefully for your safety. Do not depend on the

rear view camera exclusively.

2-8. GPS1.Navigation Software Installation

Copy the application program with suffix name APK to SD card or U disk.:

Click into the document management interface to find SD card or U disk

directory and select APK application, and click install directly.

2. GPS Navigation Apps supported:

Google maps, Sygic, IGO, Navitel, Garmin, etc.The system allows the users to install their choice of different navigation programs,

click the Navi button to select your desired navigation app to be the default app for

the Navi button.

Notes:

* The unit does not include any pre-installed navigation programs or maps.

The user can download and install navigation apps from the Google Play store

or manually install navigation apps they already own.

* Google Maps requires an active data connection to use.


17/25

\\ 2928 //

F

eatures

F

eatures

2-9. OBD2The system allows you to connect to an external Bluetooth OBD2 adapter.

Under Bluetooth settings menu you can scan / search for your OBD2 device.

Connecting process (We use TORQUE for example below) :

1. Plug the external OBD2 Bluetooth adapter into the vehicle OBD2 connector.

2. Open bluetooth settings and press the "Search OBD Bluetooth device",

option to start scanning.

3. Select the detected OBD2 Bluetooth adapter shown in the list after the system

finish scanning.

4. Enter in the PIN code for the OBD2 Bluetooth adapter. The PIN code is usually

0000 or 1234. Check your OBD2 Bluetooth adapters manual for the correct

PIN code.

5. Open the TORQUE app, click menu then touch settings, then click OBD2

adapter settings, select Bluetooth as the connection type, and click the

Bluetooth device which is connecting with the unit.

6. If the connection is made successfully the OBD indicator on the top bar will turn

green.

Note: It may take about 1 minute for Torque to successfully connect the first time.

Displays the following sensor data:

- Engine RPM

- Calculated Load Value

- Coolant Temperature

- Fuel System Status

- Vehicle Speed

- Short Term Fuel Trim

- Long Term Fuel Trim

- Intake Manifold Pressure

- Timing Advance

- Intake Air Temperature

- Air Flow Rate

- Many more...

For more info and support please contact the Torque app developers

https://play.google.com/store/apps/details?id=org.prowl.torque


18/25

\\ 3130 //

Features

Features

2-10. The Browser 2-11. The use of touch screenYou can use your fingers to move icons, press buttons, select menu options,

and type on the on screen keyboard.

Moving Objects: Click and hold an icon or file without lifting your finger off the

screen move the selected item to your target location.

You can surf the web by pressing anywhere on the address bar or search bar.

The on screen keyboard will popup allowing you to enter your search term or

web address.

Pressing the Star icon will save and bookmark the current page.

Pressing the Tabs will allow you to switch between the open pages.

Pressing the menu button will allow you to change the browser settings

Switching pages: To switch to different pages of the Home Screen or pages

in apps touch the screen and quickly slide it to the left or right.

Zoom: To zoom in and out of photos or maps use two fingers on the screen

and squeeze them together or move them apart.


19/25

\\ 3332 //

S

ettings

S

ettings

3. Settings

Wi-Fi

Turn Wifi On or Off. When Wifi is on the unit will scan for nearby WiFi hotspot

and display them in a list. Click on your wireless network and enter the

password if required. Once the device is connected to the wireless network,the WiFi icon will appear in the status bar showing the signal strength.

Bluetooth

Auto Connection On/Off, Auto Answer Calls, PIN Code Settings,

and Search for OBD devices

More...

Set up the VPN, Portable hotspot, and Mobile networks.

Sound

Set Subwoofer Crossover, Reversing Mute On/Off, Reversing Volume

Adjustment

3-1 Wireless & Network

3-2 Devices


20/25

3-3 Personal

\\ 3534 //

S

ettings

S

ettings

Display

Set brightness level, change wallpaper setting, and screen saver settings.

Storage

Displays the amount of used and unused storage space for Internal

Storage, SD Cards, and USB Drives.

Note:

1. To safely remove any SD cards or USB flash drives from the unit

you must first click "Unmount", and confirm the option. Only after

unmounting the cards or drives then you can safely remove the SD

cards or USB flash drives from the unit.

If you eject the SD Cards or unplug the USB Flash drives withoutunmounting first might result in corrupted files or other system

instability.

Applications

Check running services and how much resources is being used by

the system

If an installed app is starting to cause problems you can stop it,

clear its data , cache, or uninstall it from the system.

Location services

- Googles Location Service

- GPS Satellites

- Location & Google Search


21/25

\\ 3736 //

S

ettings

S

ettings

Security

Set Viewing level, Viewing Level password, Password display, Third-

party applications, Credential Storage

Language & input

Language selection, Spell Checker, choose your favorite keyboard,set up Voice Search, Text-to-speech output, and Pointer speed.

Backup and Reset

Data backup or restore, restore factory Settings

Warning: Once you perform a "Factory data reset" all user data,

settings, and user installed apps will be lost. You should backupany data or apps you would like to save before doing a Factory data

reset.


22/25

3-4 Add Account

3-5 System

Software upgrade

To update the systems software you will need to copy the provided

update folder containing the new software update files to the root of

your sdcard. Insert the sdcard into the NAVI slot.

Go to the system settings menu - select About System then select

System Upgrade and follow the on screen instructions. Do not

power off the unit or turn off your car until the update process iscomplete. The update process can take up to 5 minutes.

Note: It is recommended to use a 16GB or smaller sdcard to update

the system. This will delete all user accounts, data, settings, and user

installed application on the unit. It is recommended to backup any

data or files you would like to keep before proceeding with the systemsoftware update. If you have any questions or need further help with

the software update process please contact support at

[email protected]

3-6 Car SettingsSet the Rearview Camera, USB speed setting, standby option, novideo when driving, headlight detection switch, set the default naviga-

tion

\\ 3938 //

S

ettings

S

ettings

You can add Google account, E-mail account.


23/25

Set standby mode / cold start

FM Radio Area Setting

Go to System settings menu - Factory Settings (password: 0000) - FM

radio area settings. From the popup menu select your current area

Set Boot Logo

Go to System settings menu - Factory Settings (password: 0000) - Set

boot logo

\\ 4140 //

S

ettings

S

ettings

Go to System settings menu - Car Settings - Standby option

From there you can choose to have the unit cold boot at every

start or to go into standby mode for the set amount of time. When

the standby time expires the unit will go into full shutdown mode

requiring a cold start at the next start. Booting from cold start willsave the most battery power. Only use the standby mode option if

you have a new or strong car battery.

Boot time from standby mode = 2 seconds

Boot time from cold start = 20 seconds

Change NAVI button

Go to System settings menu - Car Settings - Default navigationsetting.

From there you can select any app from the "All app" list to be the

default app opened by pressing the "NAVI" button.

3-7 Factory Settings

Factory Restore:

1. Press the power button 8 times in a row and on the 9th press and

hold the power button down for 3 seconds. The factory restoreprocess can take up to 5 minutes to complete. All user settings and

user installed apps will be lost. It is recommended to back up all user

installed apps before proceeding.


24/25

Date & time

You can use the Internet to provide time or time zone, or manually set

the date and time, select time zone, and time and date display format.Note: Most Android apps require the date and time to be set correctly

for the apps to work.

About Device

Displays information about the device and software version

\\ 4342 //

Troub

leshooting

S

ettings

Power-on fail Check power cable connection are secured. Check if power fuse

are still good. Replace power fuse if broken

TFT display distorted ornot responsive

Press Reset key on the panel once

Fail to receive radio

station

Check if the radio antenna is connected securely and has not

become loose

Poor radio station

reception

* Check if the antenna connection is loose or disconnected.

Replace with a new one if broken

* Weak signal of that station in your current position, change to

another radio station with strong signal

* Poor connection of ground wire: Make sure that the ground wire

is connected securely

Fail to load the Disc

* The Disc is damaged

* Non-standard Disc - A mini disk CD should not be inserted into

the loader

Noise from Disc Check the condition of the Disc for scratches or other defects

No video outputVideo output is only available when playing VCD/DVD disc

Poor connection of video output to the external monitor

Unstable picture Improper color settings, change the color system to PAL or NTSC

Fail to connect the unit

via bluetooth

Incorrect pair code, input the pair code shown on Bluetooth

interface

Bluetooth phone call

makes echoVolume setting is too high: Turn the volume to a proper level

Poor voice quality of

bluetooth phone call

Bluetooth works best when its near to the paired device, Other

electronic devices nearby might be causing interference.

Fail to play media filefrom SD card or USB

Please refer to the media file compatibility list in section 2-3.

Sdcard or USB flash

drive not detected.

Double check to make sure that your sdcard or usb flash drive are

formatted either FAT16, FAT32, or NTFS. ExFAT is not supported.

Symptom Cause and Action

4. Troubleshooting

Fail to read hard-disk

contents

The system only supports externally powered hard drive formatted

FAT16, FAT32, or NTFS. ExFAT format is not supported.

Screen does not power

on

The unit requires a strong steady 12v signal from the car s battery.

Check the battery level and recharge to 100%


25/25

44 //

NAVI sdcard slot:

- This is the default storage path for the Android operating system and

most third party apps. When you install an offline GPS app like Sygic,

iGo, or Navigon the map data will be downloaded to and read from

this location. If you are using online streaming services like Spotify itwill also download and cache to this location. If you are using a third

party media app you might have to store your media in this location or

if the app allows it redirect the app to look in the MEDIA sdcard

location. You should always have an sdcard inserted here as it isrequired by most apps to save data.

MEDIA sdcard slot:

- This is the default location where the built in SDHC app looks for

music, videos, and photos. The built in SDHC app will not look for

media in the NAVI slot. Most third party apps will not look here firstunless told to by the user via settings change in that app.

It is recommended to have your media stored and read from the

MEDIA sdcard slot location and have map and third party app data in

the NAVI sdcard slot. Doing this allows the the system to do two

different things at the same time. The system can play your music orvideos from the MEDIA sdcard and at the same time read map data

from the NAVI sdcard without slowing down the system performance.

Do not eject the sdcard in the NAVI slot or MEDIA slot while the unit is

powered on as this can corrupt the files on the card. Ejecting thesdcard while still powered on would be similar to pulling the hard driveout of your computer when it is still writing to the drive.

Android Easter Egg

Go to System settings menu - About devices - press "Android version"3 times fast

Documents

AVIN Android 4.1.1 Operating Manual_01!07!2015