Upload
tranthien
View
218
Download
0
Embed Size (px)
Citation preview
ID:ID:Autronica Fire and Security AS 1ID:Autronica Fire and Security AS ■ 1
Autronica Fire and Security AS
A leading innovator, manufacturer and supplier ppof fire & gas detection equipment
Founded in 1957 in Trondheim, Norway
“Protecting life, environment and property”
ID:ID:Autronica Fire and Security AS 2ID:Autronica Fire and Security AS ■
Fire & Gas Detection Challenges
Building Fire Detection System 95% of Critical Faults caused by electronics faults human mistakes or manual testing 95% of Critical Faults caused by electronics faults, human mistakes, or manual testing
ID:ID:Autronica Fire and Security AS 3ID:Autronica Fire and Security AS ■
AutroSafe – Automatic Addressing
ID Each detector has a unique ID,
and therefore automatic addressing IDIDENTITETSKORTMulti SensorSENSORMULTI14 05 17NRR <123 004 567 8<246 DES 00
and therefore automatic addressing When powering up, the system will
automatically find all units’ “IDs”, register
001199828000346
004199828001125 008199827600125
1
27
registerand “remember”...
and simultaneously register each detectors place in the 004199828001125
006199828001025
007199828000725
008199827600125
PRESS HERETRYKK HERKNUS GLASSET
BREAK GLASS
BN- 35BRANNALARM
Tilpasningsenhet
FIRE ALARMInterface unit
Nr.
No
3
46
each detectors place in the loop
Built-in Short Circuit Isolators 100% Operational with Wiring Fault
ID:ID:Autronica Fire and Security AS 4ID:Autronica Fire and Security AS ■
007199828000725
001199828000025 008199827600126
No.
56 100% Operational with Wiring Fault
Specific Location of Fault Provided
AutroSafe SelfVerify®
Power supply
C i iAll L U it Communication-interface
SV-control
Smoke detector
All Loop Units Automatically Tested
Every 24 Hours
Fire Alarm
Fault warningFault signal
SelfVerify®ALARM!ALARM!
Fire AlarmFire Alarm Signal
OperatingAl
Detectionchamber
SelfVerifystimulator
STOP!
ID:ID:Autronica Fire and Security AS 5ID:Autronica Fire and Security AS ■
p gAlarm-signal
Test smoke
Fire & Gas Detection Challenges
Building Fire Detection System 95% of Critical Faults caused by electronics faults human mistakes or manual testing
Building Fire Detection System 95% of Critical Faults caused by electronics faults human mistakes or manual testing 95% of Critical Faults caused by electronics faults, human mistakes, or manual testing 95% of Critical Faults caused by electronics faults, human mistakes, or manual testing
Communication Failures – Flame & Gas Detectors Between Engineering & Procurement Between Engineering & Maintenance/Operations Between Engineering & Maintenance/Operations Recognizing Need for Revising Procedures
ID:ID:Autronica Fire and Security AS 6ID:Autronica Fire and Security AS ■
AutroFlame X33AF – Technology
Multispectrum IR Maximum False Alarm RejectionMaximum False Alarm Rejection Solar Resistance Single Detector for Multiple Fuels
Automatic Optical Integrity (OI) Test Built-in lamps test all sensors every 60
seconds No external test lamp required
ID:ID:Autronica Fire and Security AS 7ID:Autronica Fire and Security AS ■
X33AF – Cone of Vision
N t All Fl D t t “S ” E ll Not All Flame Detectors “See” Equally
Coverage Areas are different for each model & manufacturer
Smaller coverage areas lead to a higher quantity of detectors required
ID:ID:Autronica Fire and Security AS 8ID:Autronica Fire and Security AS ■
AutroPoint HC200 – Technology
A diffusion-based, infrared combustible gas detector (point-IR) that provides continuous, fixed monitoring of flammable hydrocarbon gases from 0 to 100% Lower Explosive Limit (LEL)
Methane (default) ethane propane butane ethyleneMethane (default), ethane, propane, butane, ethylene and propylene (100 flammable Hydrocarbon vapours)
Calibration Not Required!
21 Years MTBF
ID:ID:Autronica Fire and Security AS 9ID:Autronica Fire and Security AS ■
AutroPath HC-600 Open Path Gas Detector
5 – 120 meter Separation
Redundant Xenon IR lamps
Same detector model (spares) for entire range of separation distance
ID:ID:Autronica Fire and Security AS 10ID:Autronica Fire and Security AS ■
Acoustic Gas Leak Detector
•Stainless Steel
•4-20mA w/ HART
SIL 2 R t d• SIL-2 Rated
• Range of 12-20m (at 58dB)
• Analyzes 24 discrete ultrasonic frequency bands
ID:ID:Autronica Fire and Security AS 11ID:Autronica Fire and Security AS ■
• Data Logging w/ Removable Storage
AutroTox Gas Detectors
Local Display with Relay, Alarm, and Fault Outputs Combined with isolated 4-20mA H2S 0-20 ppmOutputs Combined with isolated 4 20mA
4-20 mA output with HART
Nonintrusive Calibration
pp H2S 0-50 ppm H2S 0-100 ppm CL2 0-10 ppm
Fully Explosion-Proof Housing
316SS or coated aluminum
Easy-to-Set Alarm Levels
NH3 0-100 ppm NH3 0-500 ppm H2 0-1000 ppm
Easy to Set Alarm Levels
Access to Alarm and Fault History
Multiple Conduit Access Points
O2 0-25% by Vol CO 0-100 ppm CO 0-500 ppm SO2 0 20 ppm
ID:ID:Autronica Fire and Security AS 12ID:Autronica Fire and Security AS ■
SO2 0-20 ppm SO2 0-100 ppm
Fire & Gas Detection Challenges
Building Fire Detection System 95% of Critical Faults caused by electronics faults human mistakes or manual testing
Building Fire Detection System 95% of Critical Faults caused by electronics faults human mistakes or manual testing 95% of Critical Faults caused by electronics faults, human mistakes, or manual testing 95% of Critical Faults caused by electronics faults, human mistakes, or manual testing
Communication Failures – Flame & Gas Detectors Between Engineering & Procurement Between Engineering & Maintenance/Operations Between Engineering & Maintenance/Operations Recognizing Need for Revising Procedures
Industry Misconceptions SIL
ID:ID:Autronica Fire and Security AS 13ID:Autronica Fire and Security AS ■
What is SIL?
Safety Integrity Level (SIL) is a measure of safety for a given protective function.
Specifically, the extent to which the end user can expect the protective function to perform, and in the case of a failure, fail in a safe mannerin a safe manner.
This protective function is known as the Safety Instrumented Function (SIF)Function (SIF).
A Safety Instrumented System (SIS) is a collection of components (field devices and logic solver) that execute one or
ID:ID:Autronica Fire and Security AS 14ID:Autronica Fire and Security AS ■ 14
more SIFs.
SIL Misconceptions
SIL Applies to Individual Devices
Connecting “SIL Devices” Creates a SIL Approved SystemConnecting SIL Devices Creates a SIL Approved System
Redundancy is Required to Meet a SIL Rating
ID:ID:Autronica Fire and Security AS 15ID:Autronica Fire and Security AS ■ 15
Misconception: - SIL Applies to Individual Devices
IEC-61508 states that a SIL number applies to a complete function (SIF), i.e. the field sensor, the logic solver and the final element. It is therefore incorrectthe field sensor, the logic solver and the final element. It is therefore incorrectto refer to any individual item or equipment having a safety integrity level.
An individual component can be certified for use in a particular SIL application An individual component can be certified for use in a particular SIL application, but such a certificate constitutes only part of the verification effort, since the target SIL must be verified for the complete SIF.
Detector Loop driver d l
F&G alarm l Output
SIF
ID:ID:Autronica Fire and Security AS 16ID:Autronica Fire and Security AS ■
Detector module panel Output
Misconception: – SIL Requires Redundancy
SIL ratings do not require redundancy. SIL Ensures that a safety related system adequately performs the SIL Ensures that a safety related system adequately performs the
required safety functions under all stated conditions within a defined period of time.
SIL th i k d ti i d f t l bl l l f i k SIL assesses the risk reduction required for a tolerable level of risk.
Redundancy is used to raise the availability of unreliable equipment.y y q p
How likely is it that the function in question will perform its i d t k h d d?
ID:ID:Autronica Fire and Security AS 17ID:Autronica Fire and Security AS ■ 17
assigned task when needed?
Autronica – The Only Fire Detection System SIL 2 Approved by TUVSIL 2 Approved by TUV
Autronica is safe and reliable. SelfVerify function tests field devices and reports system as if newly installed every day. p y y y y
Autronica AutroSafe system’s SIF & SIS have been tested and approved by third party TUV - World leader in SIL assessment.y p y
Sensor Loop driver F&G alarm Output
AutroSafe SIF SIL 2 Approved from Input to Output
Sensor module panel Output
ID:ID:Autronica Fire and Security AS 18ID:Autronica Fire and Security AS ■ 18
Fire & Gas Detection Challenges
Building Fire Detection System 95% of Critical Faults caused by electronics faults human mistakes or manual testing
Building Fire Detection System 95% of Critical Faults caused by electronics faults human mistakes or manual testing 95% of Critical Faults caused by electronics faults, human mistakes, or manual testing 95% of Critical Faults caused by electronics faults, human mistakes, or manual testing
Communication Failures – Flame & Gas Detectors Between Engineering & Procurement Between Engineering & Maintenance/Operations Between Engineering & Maintenance/Operations Recognizing Need for Revising Procedures
Industry Misconceptions SIL
Compliance with Different Worldwide Regulations
ID:ID:Autronica Fire and Security AS 19ID:Autronica Fire and Security AS ■
Autronica – Always a Safe Choice
Designed and approved according to international standards and regulationsg
ISO 9001 EX certification IEC61508 SIL 2
Approval Certificates Available for Download
IEC61508 SIL 2
ID:ID:Autronica Fire and Security AS 20ID:Autronica Fire and Security AS ■
NAN YANG
Fire & Gas Detection Challenges
Building Fire Detection System 95% of Critical Faults caused by electronics faults human mistakes or manual testing
Building Fire Detection System 95% of Critical Faults caused by electronics faults human mistakes or manual testing 95% of Critical Faults caused by electronics faults, human mistakes, or manual testing 95% of Critical Faults caused by electronics faults, human mistakes, or manual testing
Communication Failures – Flame & Gas Detectors Between Engineering & Procurement Between Engineering & Maintenance/Operations Between Engineering & Maintenance/Operations Recognizing Need for Revising Procedures
Industry Misconceptions SIL
Compliance with Different Worldwide Regulations
Communicating with PLC/DCS/ICSS/SIS/insert your own initialism
ID:ID:Autronica Fire and Security AS 21ID:Autronica Fire and Security AS ■
Communicating with PLC/DCS/ICSS/SIS/insert-your-own-initialism
AutroSafe – CommunicationSafety PLC
Modbus RTU, Modbus TCP, and OPC
{or AutroCom}
AutroSafe – BS-420 / BC-420 panels
A t S f l h i t t d M db t
ID:ID:Autronica Fire and Security AS 22ID:Autronica Fire and Security AS ■
AutroSafe panels have integrated Modbus converters
AutroCom - direct link to DCS vendorsThe Serial Port on the Multifunction Connection List can be used for one of these communication
types: Serial – VDR Serial – ESPA Serial - MODBUS Master
ABB AC400 ABB AC800 (SIL2)
Serial MODBUS Master Serial - MODBUS Slave Serial - Autrocom:
SERIAL SERIAL SLIDING WINDOW SERIAL SLIDING WINDOW HIGH INTEGRITY*
Siemens S7 Kongsberg (SIL2) Emerson Delta V
SERIAL SLIDING WINDOW HIGH INTEGRITY(For example for SIL2 connections)
Two TCP/IP ports on the main board (BSA-400) in different subnet, can be connected to switches with multiple ports, and can be used for up to six of these communication types:
TCP - MODBUS Master TCP - MODBUS Slave TCP - Autrocom:
TCP/IP TCP/IP HIGH INTEGRITY*
(For example for SIL2 connections)
ID:ID:Autronica Fire and Security AS 23ID:Autronica Fire and Security AS ■
TCP – Web server with Secure LogOn and Automatically shutdown. For uploading and downloading software, logs, etc.
Truly Redundant Communication Architecture
Safety PLC/DCS
BS 420
Safety PLC/DCS
BS-420
ID:ID:Autronica Fire and Security AS 24ID:Autronica Fire and Security AS ■
AutroSafe IFG – Architecture Overview
ID:ID:Autronica Fire and Security AS 25ID:Autronica Fire and Security AS ■
Thank You for Your Time
Are There Any Questions
ID:ID:Autronica Fire and Security AS 26ID:Autronica Fire and Security AS ■ 26