Embed Size (px)
Citation preview
CETECOM’s automotive EMC testing offers a range of quality services which can be applied at all stages of the vehicle lifecycle, in accordance with the Regulatory Directives or tailored to individual requirements of the Automotive Industry
REGULATORY EMC TESTING OF ELECTRIC/ELECTRONIC SUBASSEMBLIES FOR MOTOR VEHICLESElectrical components and electronic subassemblies which are intended for the installation or attachment into/at vehicles must fulfill the regulatory requirements according to EC and ECE Directives.
E-MARK / E-MARKCETECOM is accredited by KBA and SNCH (the Federal Motor and Transport Authority of Germany and Luxembourg) to conduct the EMC tests and issue the technical report for the Type Approval (E-mark). The ‘E-mark’ is based on UN ECE regulations issued by the Economic Commission for Europe. The testing procedures may only be conducted by laboratories which are accredited by the respective national authorities.
DAKKSIn addition CETECOM is accredited by DAkkS for several international and European standards (see scope of accreditation):∙ UN ECE-R10-Rev. 05
EMC for motor vehicles, trailers (M, N, O)∙ 97/24/EG # 2006/120/EG, §8 EMC for two-
and three-wheeled motor vehicles∙ 75/332/EWG # 2001/3/E EMC of agricultural
and forestery tractors∙ UN ECE-R116
IV – electrical immobilizer II – stealth alarm
EMC TESTING OF RADIO AND TELECOMMUNICATION APPLIANCES FOR CAR INTEGRATIONRadio appliances or telecommunication devices for car integration must fulfill the R&TTE Directives referring to electromagnetic compatibility (EMC). CETECOM offers the following measurements:∙ EN 301 489-1 General EMC requirements∙ EN 301 489-3 Vehicle radar, Keyless Entry,
Immobilizer, RFID, GPS∙ EN 301 489-7 GSM∙ EN 301 489-17 Bluetooth® , WLAN∙ EN 301 489-24 W-CDMA
EMC TESTING FOLLOWING REQUIREMENTS OF THE AUTOMOBILE INDUSTRYIn addition CETECOM is able to create specifc test plans and conduct the corresponding EMC tests following customizedrequirements of the Automobile Industry:∙ ISO 11452-x Radiated EMC testing
> 200 V/m 200- 4000 MHz, BCI, Stripline∙ ISO 16750 general EMC requirements as to
motor vehicle components∙ CISPR 12, 25 Emission testing motor vehicle
components∙ ISO TR 10605 ESD electrostatic discharge∙ ISO 7637-x Transients∙ Motor vehicles e.g. Audi, BMW, Mercedes-Benz,
PSA, Porsche, smart, VW∙ Agriculture and forestry e.g. Claas, Fendt, John Deere∙ Construction machines e.g. Bomag, Hitachi,
Sumitomo, Terex
AUTOMOTIVE EMC TESTING
BECAUSE QUALITY MATTERS
ABOUT CETECOM
For over twenty years, the CETECOM Group has been renowned as an independent test laboratory for mobile phones and other wireless devices. With over 400 employees and test labs in Europe, North America and Asia, CETECOM offers a unique service portfolio covering the entire range of cellular and consumer wireless products. CETECOM provides testing services, consulting and training for wireless technologies: GSM, WCDMA, LTE, CDMA, Bluetooth, Wi-Fi, NFC and other systems. We also perform a wide range of testing in the areas of mobile software applications, OTA, SAR, FCC, EMC, field trials, acoustics, batteries and accessories. CETECOM participates in the development of global standards and test specifications.
