Upload
hoangdung
View
220
Download
0
Embed Size (px)
Citation preview
features:
• Micron-precise depth filtration of solids
• Innovative disc technology captures and retains large amounts of solids
• Long-term operation with minimal maintenance
• Easy and simple operation
• Short automatic backwash with regulated water volume for a small water footprint
• Permanently eliminates the need to replace filter media
• Compact design
3”- 4” SK ApolloAutomatic disc filtration system with large filtration area for cost effective solutions
inlet/outlet connection flow rates filtration degrees max. working pressure
3” Angle: 6” - 8” (150 - 200 mm)
4” Twin: 8” - 12” (200 - 300 mm)
395 - 1,585 gpm (90 - 360 m3/h)
790 - 2,640 gpm ( 180 - 600 m3/h)
and higher
100 - 400 micron
145 psi (10 bar)
Construction materials
Filter Housing & Lid PP (Polypropylene)
Disc elements PP (Polypropylene) or PA (Polyamide)
Backwash valves RPA (Reinforce Polyamide) or RPP (Reinforce Polypropylene)
Manifolds PP (Polypropylene)
Seals NBR or EPDM, (Viton optional)
Control Tubing PE or PA
How the 3”-4” Apollo Systems Work
GeneralThe Apollo 3” and 4” Spin KlinTM series are modular, all polymeric, automatic disc filters with a patented self-cleaning
backwash mechanism.
The 3” and 4” Apollo systems range in flow rates from 395 gpm (90 m3/h) to 2,640 gpm (600 m3/h) with filtration degrees ranging
from 20–400 micron. Inlet/Outlet from 6”–12” (150-300 mm) diameter.
The Filtration ProcessThe discs are stacked on the Spin KlinTM spine and assembled according to pre-determined water filtration requirements.
During filtration, the discs are compressed by means of a pre-loaded spring and differential pressure, forcing the water
to pass through the grooved disc surface, thus trapping the solids.
The Backwash ProcessActivated by a pre-determined time trigger or differential pressure, the system enters backwash mode.
The inlet valve port shuts while the drain valve port opens. During the backwash process, pressure is released and the spine’s
piston elevates, releasing the compression on the discs. Tangential jets of filtered water are then forced through the nozzles
positioned along the spine. At this stage the discs spin freely, loosening the trapped solids which are then flushed out.
During the flushing cycle each filter pod is backwashed sequentially, while the other pods continue to supply filtered
water downstream. When a pod begins the backwash cycle, the system valves automatically reverse the flow in the pod,
allowing filtered downstream pressurized water to enter the backwashed filter.
External Source BackwashEach filter is backwashed sequentially, while the other filters continue to supply filtered water downstream. In each
backwashed filter the inlet & outlet valves automatically close and the drain & external source valves automatically
open. Pressurized filtered water from the external source header enters the backwashed filter through its outlet port
and backwashes it.
Apollo Models:
• 3” Apollo Angle Batteries
• 3” Apollo Angle Batteries with External Source
• 4” Apollo Twin Batteries
• 4” Apollo Twin Batteries with External Source
The Apollo Spine Technology Offers:• Significantly larger filtration area (triple the 2” disc element)
• Less valves and accessories
• Optional use of low pressure backwash spines, as low as 1.5 bar
• Seawater polymeric materials available
• Lower backwash flow during cleaning process
• Unique design offers the largest disc element technology on the market
Disc material type availability according to filtration degree:
Color Code Black Red Yellow Blue
Micron degree 100 130 200 400
PP Disc PA (Nylon) Disc PP PP PP PP
Filtration mode Backwash modeApollo spine
3” Apollo Angle Battery
3 x 3” Apollo Angle Battery
Head Loss Graphs (in clean water) 400µ 100µ
4 x 3” Apollo Angle Battery 5 x 3” Apollo Angle Battery
6 x 3” Apollo Angle Battery 7 x 3” Apollo Angle Battery 8 x 3” Apollo Angle Battery
0.11.4
0.02
0.080.06
0.04
0.4
0.2
0.3
0.7
0.5
0.4
1.0
0.60.8
0.2
7.0
5.0
3.04.0
2.0
14.0psi/bar
m3/hrgpm
200
40
100
20
60
200
1000 600
60 100
400
1000
4000 2000
500 10 0.01
0.11.4
0.02
0.080.06
0.04
0.4
0.2
0.3
0.7
0.5
0.4
1.0
0.60.8
0.2
7.0
5.0
3.04.0
2.0
14.0psi/bar
m3/hrgpm
200
40
100
20
60
200
1000 600
60 100
400
1000
4000 2000
500 10 0.01
0.11.4
0.02
0.080.06
0.04
0.4
0.2
0.3
0.7
0.5
0.4
1.0
0.60.8
0.2
7.0
5.0
3.04.0
2.0
14.0psi/bar
m3/hrgpm
200
40
100
20
60
200
1000 600
60 100
400
1000
4000 2000
500 10 0.01
0.11.4
0.02
0.080.06
0.04
0.4
0.2
0.3
0.7
0.5
0.4
1.0
0.60.8
0.2
7.0
5.0
3.04.0
2.0
14.0psi/bar
m3/hrgpm
200
40
100
20
60
200
1000 600
60 100
400
1000
4000 2000
500 10 0.01
0.11.4
0.02
0.080.06
0.04
0.4
0.2
0.3
0.7
0.5
0.4
1.0
0.60.8
0.2
7.0
5.0
3.04.0
2.0
14.0psi/bar
m3/hrgpm
200
40
100
20
60
200
1000 600
60 100
400
1000
4000 2000
500 10 0.01
0.11.4
0.02
0.080.06
0.04
0.4
0.2
0.3
0.7
0.5
0.4
1.0
0.60.8
0.2
7.0
5.0
3.04.0
2.0
14.0psi/bar
m3/hrgpm
200
40
100
20
60
200
1000 600
60 100
400
1000
4000 2000
500 10 0.01
Typical Installation Drawing
47 15/16''47 15/16''47 15/16''47 15/16''47 15/16''47 15/16''
37 1/16''37 1/16''37 1/16''37 1/16''37 1/16''37 1/16''
120 15/32''105 1/2''90 9/16''75 19/32''60 5/8''45 21/32''30602680230019201160
941941941941941
12181218121812181218 1218
941
6"6"6"
Arkal UniversalFlange:
ASA, BSTD, DIN,JIS
Arkal UniversalFlange:
ASA, BSTD, DIN,JIS
Arkal UniversalFlange:
ASA, BSTD, DIN,JIS
Arkal UniversalFlange:
ASA, BSTD, DIN,JIS
Arkal UniversalFlange:
ASA, BSTD, DIN,JIS
E
C
D Inlet / Outletconnection
Drain diameter
Drain connection
Battery dry waightlbsKg
inch
inch
inchmm
mminchmm
6" 6"
154043
6"
3"3"
Arkal UniversalFlange:
ASA, BSTD, DIN,JIS
Arkal UniversalFlange:
ASA, BSTD, DIN,JIS
Arkal UniversalFlange:
ASA, BSTD, DIN,JIS
3"
inch
No. of filtersDescription
Length
Width
Height
Inlet / Outlet diameter
A
B
Units5 6 7 8
Arkal UniversalFlange:
ASA, BSTD, DIN,JIS
Arkal UniversalFlange:
ASA, BSTD, DIN,JIS
Arkal UniversalFlange:
ASA, BSTD, DIN,JIS
3" 3" 3"Arkal Universal
Flange:ASA, BSTD, DIN,
JIS
125 155 190 220 255 285275 341 418 484 561 627
65 7 8PATH-T: \ DRAWINGS ARKAL CATALOG-SOLID \ BATTERIES \ INDUSTRY CATALOG \ SOLIDWORKS \
SW-P
rint:1
1/13/2
012M
onda
y, No
vemb
er 12
, 201
2 3:59
:47 PM
1639P0604U3 CATALOG
D
E
F
C
1 2 3 4
B
A
C
D
A
B
SHEET 1 OF 1
OUT
DRAIN
IN
A B
C
47 15/16''47 15/16''47 15/16''47 15/16''47 15/16''47 15/16''
37 1/16''37 1/16''37 1/16''37 1/16''37 1/16''37 1/16''
120 15/32''105 1/2''90 9/16''75 19/32''60 5/8''45 21/32''30602680230019201160
941941941941941
12181218121812181218 1218
941
6"6"6"
Arkal UniversalFlange:
ASA, BSTD, DIN,JIS
Arkal UniversalFlange:
ASA, BSTD, DIN,JIS
Arkal UniversalFlange:
ASA, BSTD, DIN,JIS
Arkal UniversalFlange:
ASA, BSTD, DIN,JIS
Arkal UniversalFlange:
ASA, BSTD, DIN,JIS
E
C
D Inlet / Outletconnection
Drain diameter
Drain connection
Battery dry waightlbsKg
inch
inch
inchmm
mminchmm
6" 6"
154043
6"
3"3"
Arkal UniversalFlange:
ASA, BSTD, DIN,JIS
Arkal UniversalFlange:
ASA, BSTD, DIN,JIS
Arkal UniversalFlange:
ASA, BSTD, DIN,JIS
3"
inch
No. of filtersDescription
Length
Width
Height
Inlet / Outlet diameter
A
B
Units5 6 7 8
Arkal UniversalFlange:
ASA, BSTD, DIN,JIS
Arkal UniversalFlange:
ASA, BSTD, DIN,JIS
Arkal UniversalFlange:
ASA, BSTD, DIN,JIS
3" 3" 3"Arkal Universal
Flange:ASA, BSTD, DIN,
JIS
125 155 190 220 255 285275 341 418 484 561 627
65 7 8PATH-T: \ DRAWINGS ARKAL CATALOG-SOLID \ BATTERIES \ INDUSTRY CATALOG \ SOLIDWORKS \
SW-P
rint:1
1/13/2
012M
onda
y, No
vemb
er 12
, 201
2 3:59
:47 PM
1639P0604U3 CATALOG
D
E
F
C
1 2 3 4
B
A
C
D
A
B
SHEET 1 OF 1
OUT
DRAIN
IN
A B
C
Dimensions 3 unit battery 4 unit battery 5 unit battery 6 unit battery 7 unit battery 8 unit battery
A Length 45 21/32” (1,160 mm)
60 5/8” (1,540 mm)
75 19/32” (1,920 mm)
90 9/16” (2,300 mm)
105 1/2” (2,680 mm)
120 15/32” (3,060 mm)
B Width 37 1/16” (941 mm)
C Height 47 15/16” (1,218 mm)
Filter Type 3 unit battery 4 unit battery 5 unit battery 6 unit battery 7 unit battery 8 unit battery
General Data
Max. working pressure 145 psi (10 bar)
Min. backwash pressure 30 psi (2 bar)
Max. recommended flow rate
528 gpm (120 m3/h)
704 gpm (160 m3/h)
880 gpm (200 m3/h)
1,057 gpm (240 m3/h)
1,233 gpm (280 m3/h)
1409 gpm (320 m3/h)
Available filtration degrees 400, 200, 130, 100, 55, 20 micron
Filtration volume 575 in3
(9,426 cm3)767 in3
(12,568 cm3)959 in3
(15,710 cm3)1,150 in3
(18,852 cm3)1,342 in3
(21,994 cm3)1,534 in3
(25,136 cm3)
Inlet/Outlet diameter 6” (150 mm) 6”/8” (150/200 mm) 8” (200 mm)
Max. working temperature 140°F (60°C)
Dry weight standard 275 lb (125 kg)
341 lb (155 kg)
418 lb (190 kg)
484 lb (220 kg)
561 lb (255 kg)
627 lb (285 kg)
Backwash Data
Drain connection 3” (80 mm)
Flushing time 20 seconds
Min. flow for backwash 106 gpm (24 m3/h)
3” Apollo Angle Battery External Source
3 x 3” Apollo Angle Battery EX.S. 4 x 3” Apollo Angle Battery EX.S. 5 x 3” Apollo Angle Battery EX.S.
6 x 3” Apollo Angle Battery EX.S. 7 x 3” Apollo Angle Battery EX.S. 8 x 3” Apollo Angle Battery EX.S.
Head Loss Graphs (in clean water) 400µ 100µ
0.11.4
0.02
0.080.06
0.04
0.4
0.2
0.3
0.7
0.5
0.4
1.0
0.60.8
0.2
7.0
5.0
3.04.0
2.0
14.0psi/bar
m3/hrgpm
200
40
100
20
60
200
1000 600
60 100
400
1000
4000 2000
500 10 0.01
0.11.4
0.02
0.080.06
0.04
0.4
0.2
0.3
0.7
0.5
0.4
1.0
0.60.8
0.2
7.0
5.0
3.04.0
2.0
14.0psi/bar
m3/hrgpm
200
40
100
20
60
200
1000 600
60 100
400
1000
4000 2000
500 10 0.01
0.11.4
0.02
0.080.06
0.04
0.4
0.2
0.3
0.7
0.5
0.4
1.0
0.60.8
0.2
7.0
5.0
3.04.0
2.0
14.0psi/bar
m3/hrgpm
200
40
100
20
60
200
1000 600
60 100
400
1000
4000 2000
500 10 0.01
0.11.4
0.02
0.080.06
0.04
0.4
0.2
0.3
0.7
0.5
0.4
1.0
0.60.8
0.2
7.0
5.0
3.04.0
2.0
14.0psi/bar
m3/hrgpm
200
40
100
20
60
200
1000 600
60 100
400
1000
4000 2000
500 10 0.01
0.11.4
0.02
0.080.06
0.04
0.4
0.2
0.3
0.7
0.5
0.4
1.0
0.60.8
0.2
7.0
5.0
3.04.0
2.0
14.0psi/bar
m3/hrgpm
200
40
100
20
60
200
1000 600
60 100
400
1000
4000 2000
500 10 0.01
0.11.4
0.02
0.080.06
0.04
0.4
0.2
0.3
0.7
0.5
0.4
1.0
0.60.8
0.2
7.0
5.0
3.04.0
2.0
14.0psi/bar
m3/hrgpm
200
40
100
20
60
200
1000 600
60 100
400
1000
4000 2000
500 10 0.01
SCALE: NO
F
E
D
C
0Rev.
Backup Drawing:Ref.
SIZE: A3
ASSEMBLY DRAWING1639T0604U3 CATALAG
DRW. NO:
CAT. NO:4*3" S.K. APOLLO FILTERS "A.F.E.S. BATTERY
PART NAME/TITLE:
SUBJECT/PROJECT:
1639T0604U3 CATALAGPATH-T: \ DRAWINGS ARKAL CATALOG-SOLID \ BATTERIES\ INDUSTRY CATALOG\ SOLIDWORKS\875 6
45 11/32''45 11/32''51 1/4''49 21/32''49 21/32''13021302130212621262
1612161216121572157263 7/16''61 7/8''
Dimensions
58 17/32''
45 11/32''
120 3/32''105 1/8''90 5/32''75 3/16''60 1/4''45 9/32''30502670229019101150
1152
1486
10"10"10"
Arkal Universal Flange:
ASA, BSTD, DIN, JIS
Arkal Universal Flange:
ASA, BSTD, DIN, JIS
Arkal Universal Flange:
ASA, BSTD, DIN, JIS
Arkal Universal Flange:
ASA, BSTD, DIN, JIS
Arkal Universal Flange:
ASA, BSTD, DIN, JIS
E
C
DInlet / Outletconnection
Drain Ex. S. Diameter
Drain Ex. S. connection
Battery dry waight lbsKg
inch
inch
inchmm
mminchmm
8" 8"
153043
6"
4"4"
Arkal Universal Flange:
ASA, BSTD, DIN, JIS
Arkal Universal Flange:
ASA, BSTD, DIN, JIS
Arkal Universal Flange:
ASA, BSTD, DIN, JIS4"
inch
No. of filtersDescription
Length
Width
Height
A
B
Units 5 6 7 8
Arkal Universal Flange:
ASA, BSTD, DIN, JIS
Arkal Universal Flange:
ASA, BSTD, DIN, JIS
Arkal Universal Flange:
ASA, BSTD, DIN, JIS
4" 4" 4"Arkal Universal
Flange: ASA, BSTD, DIN,
JIS155 195 240 280 325 365341 429 528 616 715 803
Inlet / Outlet diameter
Sund
ay,
Ja
nua
ry 0
6, 2
013
7:47
:36
AM
61 7/8'' 63 7/16'' 63 7/16''
*. The data in the table refers to a system with 100mic. filtration degree in average water quality .
*. Inlet/outlet manifolds are available in 6"-12" . *. This drawing is for information only .
SHEET 1 OF 1
B
A
8764 51 2 3
A
B
4321
C
F
E
D
MATERIAL:
OUT
EX.S.IN
DRAIN
A
C
B
SCALE: NO
F
E
D
C
0Rev.
Backup Drawing:Ref.
SIZE: A3
ASSEMBLY DRAWING1639T0604U3 CATALAG
DRW. NO:
CAT. NO:4*3" S.K. APOLLO FILTERS "A.F.E.S. BATTERY
PART NAME/TITLE:
SUBJECT/PROJECT:
1639T0604U3 CATALAGPATH-T: \ DRAWINGS ARKAL CATALOG-SOLID \ BATTERIES\ INDUSTRY CATALOG\ SOLIDWORKS\875 6
45 11/32''45 11/32''51 1/4''49 21/32''49 21/32''13021302130212621262
1612161216121572157263 7/16''61 7/8''
Dimensions
58 17/32''
45 11/32''
120 3/32''105 1/8''90 5/32''75 3/16''60 1/4''45 9/32''30502670229019101150
1152
1486
10"10"10"
Arkal Universal Flange:
ASA, BSTD, DIN, JIS
Arkal Universal Flange:
ASA, BSTD, DIN, JIS
Arkal Universal Flange:
ASA, BSTD, DIN, JIS
Arkal Universal Flange:
ASA, BSTD, DIN, JIS
Arkal Universal Flange:
ASA, BSTD, DIN, JIS
E
C
DInlet / Outletconnection
Drain Ex. S. Diameter
Drain Ex. S. connection
Battery dry waight lbsKg
inch
inch
inchmm
mminchmm
8" 8"
153043
6"
4"4"
Arkal Universal Flange:
ASA, BSTD, DIN, JIS
Arkal Universal Flange:
ASA, BSTD, DIN, JIS
Arkal Universal Flange:
ASA, BSTD, DIN, JIS4"
inch
No. of filtersDescription
Length
Width
Height
A
B
Units 5 6 7 8
Arkal Universal Flange:
ASA, BSTD, DIN, JIS
Arkal Universal Flange:
ASA, BSTD, DIN, JIS
Arkal Universal Flange:
ASA, BSTD, DIN, JIS
4" 4" 4"Arkal Universal
Flange: ASA, BSTD, DIN,
JIS155 195 240 280 325 365341 429 528 616 715 803
Inlet / Outlet diameter
Sund
ay,
Ja
nua
ry 0
6, 2
013
7:47
:36
AM
61 7/8'' 63 7/16'' 63 7/16''
*. The data in the table refers to a system with 100mic. filtration degree in average water quality .
*. Inlet/outlet manifolds are available in 6"-12" . *. This drawing is for information only .
SHEET 1 OF 1
B
A
8764 51 2 3
A
B
4321
C
F
E
D
MATERIAL:
OUT
EX.S.IN
DRAIN
A
C
B
Filter Type 3 unit battery 4 unit battery 5 unit battery 6 unit battery 7 unit battery 8 unit battery
General Data
Max. working pressure 145 psi (10 bar)
Min. backwash pressure 30 psi (2 bar)
Max. recommended flow rate
528 gpm (120 m3/h)
704 gpm (160 m3/h)
880 gpm (200 m3/h)
1,057 gpm (240 m3/h)
1,233 gpm (280 m3/h)
1409 gpm (320 m3/h)
Available filtration degrees 400, 200, 130, 100, 55, 20 micron
Filtration volume 575 cm3
(9,426 cm3)767 in3
(12,568 cm3)959 in3
(15,710 cm3)1,150 in3
(18,852 cm3)1,342 in3
(21,994 cm3)1,534 in3
(25,136 cm3)
Inlet/Outlet diameter 6” (150 mm) 6”/8” (150/200 mm) 8” (200 mm)
Max. working temperature 140°F (60°C)
Dry weight external source backwash
436 lb (198 kg)
470 lb (213 kg)
600 lb (272 kg)
643 lb (292 kg)
690 lb (313 kg)
738 lb (335 kg)
Backwash Data
Drain connection 3” (80 mm)
Flushing time 15 seconds
Min. flow for backwash 106 gpm (24 m3/h)
Dimensions 3 unit battery 4 unit battery 5 unit battery 6 unit battery 7 unit battery 8 unit battery
A Length 45 9/32” (1,150 mm)
60 1/4” (1,530 mm)
75 3/16” (1,910 mm)
90 5/32” (2,290 mm)
105 1/8” (2,670 mm)
120 3/32” (3,050 mm)
B Width 45 11/32” (1,152 mm)
49 21/32” (1,262 mm)
49 21/32” (1,262 mm)
51 1/4” (1,302 mm)
51 1/4” (1,302 mm)
51 1/4” (1,302 mm)
C Height 58 17/32” (1,486 mm)
61 7/8” (1,572 mm)
61 7/8” (1,572 mm)
63 7/16” (1,612 mm)
63 7/16” (1,612 mm)
63 7/16” (1,612 mm)
Typical Installation Drawing
4” Apollo Twin Battery
3 x 4” Apollo Twin Battery 4 x 4” Apollo Twin Battery 5 x 4” Apollo Twin Battery
6 x 4” Apollo Twin Battery 7 x 4” Apollo Twin Battery 8 x 4” Apollo Twin Battery
Head Loss Graphs (in clean water) 400µ 100µ
0.11.4
0.02
0.080.06
0.04
0.4
0.2
0.3
0.7
0.5
0.4
1.0
0.60.8
0.2
7.0
5.0
3.04.0
2.0
14.0psi/bar
m3/hrgpm
0.01200
1000 600
100 1000
4000 2000
500
0.11.4
0.02
0.080.06
0.04
0.4
0.2
0.3
0.7
0.5
0.4
1.0
0.60.8
0.2
7.0
5.0
3.04.0
2.0
14.0psi/bar
m3/hrgpm
0.01200
1000 600
100 1000
4000 2000
500
0.11.4
0.02
0.080.06
0.04
0.4
0.2
0.3
0.7
0.5
0.4
1.0
0.60.8
0.2
7.0
5.0
3.04.0
2.0
14.0psi/bar
m3/hrgpm
0.01200
1000 600
100 1000
4000 2000
500
0.11.4
0.02
0.080.06
0.04
0.4
0.2
0.3
0.7
0.5
0.4
1.0
0.60.8
0.2
7.0
5.0
3.04.0
2.0
14.0psi/bar
m3/hrgpm
0.01200
1000 600
100 1000
4000 2000
500
0.11.4
0.02
0.080.06
0.04
0.4
0.2
0.3
0.7
0.5
0.4
1.0
0.60.8
0.2
7.0
5.0
3.04.0
2.0
14.0psi/bar
m3/hrgpm
0.01200
1000 600
100 1000
4000 2000
500
0.11.4
0.02
0.080.06
0.04
0.4
0.2
0.3
0.7
0.5
0.4
1.0
0.60.8
0.2
7.0
5.0
3.04.0
2.0
14.0psi/bar
m3/hrgpm
0.01200
1000 600
100 1000
4000 2000
500
Filter Type 3 unit battery 4 unit battery 5 unit battery 6 unit battery 7 unit battery 8 unit battery
General Data
Max. working pressure 145 psi (10 bar)
Min. backwash pressure 30 psi (2 bar)
Max. recommended flow rate
1,057 gpm (240 m3/h)
1,409 gpm (320 m3/h)
1,761 gpm (400 m3/h)
2,113 gpm (480 m3/h)
2,466 gpm (560 m3/h)
2,818 gpm (640 m3/h)
Available filtration degrees 400, 200, 130, 100, 55, 20 micron
Filtration volume 1,150 in3
(18,852 cm3)1,534 in3
(25,136 cm3)1,917 in3
(31,420 cm3)2,300 in3
(37,704 cm3)2,685 in3
(43,998 cm3)3,068 in3
(50,272 cm3)
Inlet/Outlet diameter 8” (200 mm) 10” (250 mm) 12” (300 mm)
Max. working temperature 140°F (60°C)
Dry weight standard 351 lb (158 kg)
455 lb (205 kg)
560 lb (252 kg)
644 lb (299 kg)
813 lb (366 kg)
962 lb (433 kg)
Backwash Data
Drain connection 4” (100 mm)
Flushing time 20 seconds
Min. flow for backwash 211 gpm (48 m3/h)
Amiad Water Systems Ltd. All copy rights reserved to
reserves the rights to make changes. Amiad Water Systems Ltd. SCALE: NO
F
E
D
C
0Rev.
Backup Drawing:Ref.
SIZE: A3
REV. NAMEDESCRIPTIONDATE
ASSEMBLY DRAWING
4544P-BERMAD-CATALOG DRW. NO:
NIKOLAY
Confidential property information.
07/05/2012DATENAME
B.O.M.
APPROVEDCHECKEDDRAWN
CAT. NO:4*4" SUPER APOLLO FILTERS BATTERY
WITH BERMAD BACKFLUSH VALVES
PART NAME/TITLE:
SUBJECT/PROJECT:
4544P-BERMAD-CATALOGPATH-T: \ DRAWINGS ARKAL CATALOG-SOLID \ BATTERIES \ INDUSTRY CATALOG \ SOLIDWORKS\875 6
Width
E
D
C
B
A
3
153160"
181071"
Length
Height
Standard Inlet / Outlet diameter
Inlet / OutletconnectionDraindiameter
Battery dry weight lbsKg
inch
inchmminchmminchmm 1734
68"153160"
181071"
4"
60"153189"
22344
71"1810
108"2734
5No. of FiltersUnitsDescription
Available in ASA, BSTD, DIN, JIS
6
127"153160"
181071"
3234 3734 4234147" 166"1531
72"1830
60"1531
72"183060"
87
158 205 252 299 366 433351 455 560 644 813 962
inch
Drain connection
SHEET 1 OF 1
B
AA
B
4321
C
F
E
D
4" Arkal Universal Flange :ASA,BSTD,DIN,JIS
10"-12" 10"-12" 10"-12" 10"-12" 10"-12" 10"-12"
MATERIAL:
IN
DRAIN
OUT
B
C
A
Amiad Water Systems Ltd. All copy rights reserved to
reserves the rights to make changes. Amiad Water Systems Ltd. SCALE: NO
F
E
D
C
0Rev.
Backup Drawing:Ref.
SIZE: A3
REV. NAMEDESCRIPTIONDATE
ASSEMBLY DRAWING
4544P-BERMAD-CATALOG DRW. NO:
NIKOLAY
Confidential property information.
07/05/2012DATENAME
B.O.M.
APPROVEDCHECKEDDRAWN
CAT. NO:4*4" SUPER APOLLO FILTERS BATTERY
WITH BERMAD BACKFLUSH VALVES
PART NAME/TITLE:
SUBJECT/PROJECT:
4544P-BERMAD-CATALOGPATH-T: \ DRAWINGS ARKAL CATALOG-SOLID \ BATTERIES \ INDUSTRY CATALOG \ SOLIDWORKS\875 6
Width
E
D
C
B
A
3
153160"
181071"
Length
Height
Standard Inlet / Outlet diameter
Inlet / OutletconnectionDraindiameter
Battery dry weight lbsKg
inch
inchmminchmminchmm 1734
68"153160"
181071"
4"
60"153189"
22344
71"1810
108"2734
5No. of FiltersUnitsDescription
Available in ASA, BSTD, DIN, JIS
6
127"153160"
181071"
3234 3734 4234147" 166"1531
72"1830
60"1531
72"183060"
87
158 205 252 299 366 433351 455 560 644 813 962
inch
Drain connection
SHEET 1 OF 1
B
AA
B
4321
C
F
E
D
4" Arkal Universal Flange :ASA,BSTD,DIN,JIS
10"-12" 10"-12" 10"-12" 10"-12" 10"-12" 10"-12"
MATERIAL:
IN
DRAIN
OUT
B
C
A
Dimensions 3 unit battery 4 unit battery 5 unit battery 6 unit battery 7 unit battery 8 unit battery
A Length 68” (1,734 mm)
89” (2,234 mm)
108” (2,734 mm)
127” (3,234 mm)
147” (3,734 mm)
166” (4,234 mm)
B Width 60” (1,531 mm)
C Height 71” (1,810 mm)
72” (1,830 mm)
Typical Installation Drawing
4” Apollo Twin Battery External Source
3 x 4” Apollo Twin Battery EX.S. 4 x 4” Apollo Twin Battery EX.S. 5 x 4” Apollo Twin Battery EX.S.
6 x 4” Apollo Twin Battery EX.S. 7 x 4” Apollo Twin Battery EX.S. 8 x 4” Apollo Twin Battery EX.S.
Head Loss Graphs (in clean water) 400µ 100µ
0.11.4
0.02
0.080.06
0.04
0.4
0.2
0.3
0.7
0.5
0.4
1.0
0.60.8
0.2
7.0
5.0
3.04.0
2.0
14.0psi/bar
m3/hrgpm
0.01200
1000 600
100 1000
4000 2000
500
0.11.4
0.02
0.080.06
0.04
0.4
0.2
0.3
0.7
0.5
0.4
1.0
0.60.8
0.2
7.0
5.0
3.04.0
2.0
14.0psi/bar
m3/hrgpm
0.01200
1000 600
100 1000
4000 2000
500
0.11.4
0.02
0.080.06
0.04
0.4
0.2
0.3
0.7
0.5
0.4
1.0
0.60.8
0.2
7.0
5.0
3.04.0
2.0
14.0psi/bar
m3/hrgpm
0.01200
1000 600
100 1000
4000 2000
500
0.11.4
0.02
0.080.06
0.04
0.4
0.2
0.3
0.7
0.5
0.4
1.0
0.60.8
0.2
7.0
5.0
3.04.0
2.0
14.0psi/bar
m3/hrgpm
0.01200
1000 600
100 1000
4000 2000
500
0.11.4
0.02
0.080.06
0.04
0.4
0.2
0.3
0.7
0.5
0.4
1.0
0.60.8
0.2
7.0
5.0
3.04.0
2.0
14.0psi/bar
m3/hrgpm
0.01200
1000 600
100 1000
4000 2000
500
0.11.4
0.02
0.080.06
0.04
0.4
0.2
0.3
0.7
0.5
0.4
1.0
0.60.8
0.2
7.0
5.0
3.04.0
2.0
14.0psi/bar
m3/hrgpm
0.01200
1000 600
100 1000
4000 2000
500
Typical Installation Drawing
D
E
F
C
1 2 3 4
B
AA
B
SHEET 1 OF 1
65 7 8PATH-T: \ DRAWINGS ARKAL CATALOG-SOLID \ BATTERIES\ INDUSTRY CATALOG\ SOLIDWORKS\
4545 10 ES-BERMAD CATALOG
SUBJECT/PROJECT:
PART NAME/TITLE:WITH EXTERNAL SOURCE FOR BACKWASH4*4" SUPER APOLLO FILTERS BATTERY
CAT. NO:
MATERIAL:DRAWN
CHECKEDAPPROVED
B.O.M.
NAME DATE30/11/2012
Confidential property information.
NIKOLAY
DRW. NO:4545 10 ES-BERMAD CATALOG
ASSEMBLY DRAWING (BERMAD VALVES)
DATE DESCRIPTION NAMEREV.
SIZE: A3Ref.
Backup Drawing:
Rev.0
E
F
SCALE: NO Amiad Water Systems Ltd.reserves the rights to make changes.
All copy rights reserved to Amiad Water Systems Ltd.
C
D
inch
DrainconnectionDraindiameter inch
3" Available in Flange ASA, BSTD, DIN, JIS4"
4" Arkal Universal Flange:ASA, BSTD, DIN, JISDrainconnection
F
lbsKg 230 287 344 431 538 631
511 638 764 957 1195 1402Battery dry weight
7 8
60"213072"12"
153060"
213072"12"
1530165"146"421537153215
83"10"
211060"
1530126"
6
Available in ASA, BSTD, DIN, JIS
Description Units No. of Filters5
2715106"
211083"
4221587"
153060"
10"
4"
10"83"
211060"
153067"
1715mminchmminchmminch
inchDraindiameterconnection
Inlet / OutletInlet / Outlet diameter
Height
Length
10"83"
211060"
1530
3A
B
C
D
E
Width
A B
IN
DRAIN
OUT
EX.S.
C
D
E
F
C
1 2 3 4
B
AA
B
SHEET 1 OF 1
65 7 8PATH-T: \ DRAWINGS ARKAL CATALOG-SOLID \ BATTERIES\ INDUSTRY CATALOG\ SOLIDWORKS\
4545 10 ES-BERMAD CATALOG
SUBJECT/PROJECT:
PART NAME/TITLE:WITH EXTERNAL SOURCE FOR BACKWASH4*4" SUPER APOLLO FILTERS BATTERY
CAT. NO:
MATERIAL:DRAWN
CHECKEDAPPROVED
B.O.M.
NAME DATE30/11/2012
Confidential property information.
NIKOLAY
DRW. NO:4545 10 ES-BERMAD CATALOG
ASSEMBLY DRAWING (BERMAD VALVES)
DATE DESCRIPTION NAMEREV.
SIZE: A3Ref.
Backup Drawing:
Rev.0
E
F
SCALE: NO Amiad Water Systems Ltd.reserves the rights to make changes.
All copy rights reserved to Amiad Water Systems Ltd.
C
D
inch
DrainconnectionDraindiameter inch
3" Available in Flange ASA, BSTD, DIN, JIS4"
4" Arkal Universal Flange:ASA, BSTD, DIN, JISDrainconnection
F
lbsKg 230 287 344 431 538 631
511 638 764 957 1195 1402Battery dry weight
7 8
60"213072"12"
153060"
213072"12"
1530165"146"421537153215
83"10"
211060"
1530126"
6
Available in ASA, BSTD, DIN, JIS
Description Units No. of Filters5
2715106"
211083"
4221587"
153060"
10"
4"
10"83"
211060"
153067"
1715mminchmminchmminch
inchDraindiameterconnection
Inlet / OutletInlet / Outlet diameter
Height
Length
10"83"
211060"
1530
3A
B
C
D
E
Width
A B
IN
DRAIN
OUT
EX.S.
C
Dimensions 3 unit battery 4 unit battery 5 unit battery 6 unit battery 7 unit battery 8 unit battery
A Length 67” (1,715 mm)
87” (2,215 mm)
106” (2,715 mm)
126” (3,215 mm)
146” (3,715 mm)
165” (4,215 mm)
B Width 60” (1,530 mm)
C Height 83” (2,110 mm)
84” (2,130 mm)
Filter Type 3 unit battery 4 unit battery 5 unit battery 6 unit battery 7 unit battery 8 unit battery
General Data
Max. working pressure 145 psi (10 bar)
Min. backwash pressure 30 psi (2 bar)
Max. recommended flow rate
1,057 gpm (240 m3/h)
1,409 gpm (320 m3/h)
1,761 gpm (400 m3/h)
2,113 gpm (480 m3/h)
2,466 gpm (560 m3/h)
2,818 gpm (640 m3/h)
Available filtration degrees 400, 200, 130, 100, 55, 20 micron
Filtration volume 1,150 in3
(18,852 cm3)1,534 in3
(25,136 cm3)1,917 in3
(31,420 cm3)2,300 in3
(37,704 cm3)2,685 in3
(43,998 cm3)3,068 in3
(50,272 cm3)
Inlet/Outlet diameter 8” (200 mm) 10” (250 mm) 12” (300 mm)
Max. working temperature 140°F (60°C)
Dry weight external source backwash
511 lb (230 kg)
638 lb (287 kg)
764 lb (344 kg)
957 lb (431 kg)
1,195 lb (538 kg)
1,402 lb (631 kg)
Backwash Data
Drain connection 4” (100 mm)
Flushing time 15 seconds
Min. flow for backwash 211 gpm (48 m3/h)
910101-000789/04.2017www.amiad.com
Amiad Water Systems Ltd. D.N. Galil Elyon 1, 1233500, Israel,Tel: +972 4 690 9500, Fax: +972 4 814 1159,E-mail: [email protected]
Headquarters
The Americas
Asia
Australia
Europe
Amiad USA Inc. Main Office and Manufacturing: 120-J Talbert Road, Mooresville, NC 28117,Tel: +1 704 662 3133, Fax: +1 704 662 3155, Toll Free: +1 800 24 FILTER, E-mail: [email protected] www.amiadusa.com
West Coast Sales Office and Warehouse:1251 Maulhardt Ave, Oxnard, CA 93030Tel: +1 805 988 3323, Fax: +1 805 988 3313, Toll Free: +1 800 969 4055
BrazilAmiad Sistemas de Água Ltda., Rua Funchal, 411, Conj. 42, Vila Olimpia, São Paulo, CEP 04551-060Tel: +55 11 31923824, E-mail: [email protected] Oil & Gas, E-mail: [email protected]
MexicoAmiad México SA DE CV, AV. Jesus del Monte #39B – INT 601, Col. Jesus del Monte, C.P. 52764, Huixquilucan, Estado de México, Tel/Fax: +52 55 636 28122, Mob: +52 1 55 4909 2202E-mail: [email protected] Office: [email protected]
IndiaAmiad Filtration India Pvt Limited, 305 Sai Commercial Building, Govandi St Rd, Govandi Mumbai 400 088, Tel: +91 22-67997813/14, Fax: +91 22-67997814, Email: [email protected] China (Yixing Taixing Environtec Co., Ltd.) 70 Baihe Chang, Xingjie Yixing Jiangsu, 214204,Tel: +86 510 87134000, Fax: +86 510 87134999, E-mail: [email protected] AsiaFiltration & Control Systems Pte. Ltd., 22 Sin Ming Lane #07-71 Midview City, Singapore 573969, Tel: +65 6 337 6698, Fax: +65 6 337 8180, E-mail: [email protected]
Amiad Australia Pty Ltd. 138 Northcorp Boulevard, Broadmeadows, Victoria 3047,Tel: +61 3 93585800, Fax: +61 3 93585888, E-mail: [email protected]
Amiad Water Systems Europe SAS, Ilot No4 ZI La Boitardière, 37530 Chargé, France,Tel: +33 (0) 2 47 23 01 10, Fax: +33 (0) 2 47 23 80 67, E-mail: [email protected] Water Systems Europe SAS (Irrigation Division) 100 avenue de l’Anguillon, Z.I. des Iscles, 13160 Chateaurenard, Tel: +33 (0) 4 32 60 10 01, Fax +33 (0) 4 32 60 60 85
GermanyAmiad Water Systems SAS Europe (German branch office) Zweigniederlassung Deutschland Prinz-Regent-Str. 68 a 44795 Bochum,Tel: +49 (0) 234 588082-0, Fax: +49 (0) 234 588082-10, E-mail: [email protected]
United KingdomAmiad Water Systems UK Limited, Unit 1 Heol Rhosyn, Dafen Business Park, Dafen, Llanelli SA14 8QG,Tel: +44 (0)1792 277290, Fax: +44 (0)1792 797707, E-mail: [email protected]
Copyright © 2013 Amiad Water Systems Ltd. All rights reserved. The contents of this catalogue including without limitation all information and materials, images, illustrations, designs, icons, photographs, graphical presentations, designs, literary works, data, drawings, slogans, phrases, names, trademarks, titles and any other such materials that appear in this catalogue (collectively, the “Contents”) are the sole property of Amiad Water Systems Ltd. (“Amiad”). Amiad has sole and exclusive right, title and interest in the Contents, including any intellectual property rights, whether registered or not, and all know-how contained or embodied therein. You may not reproduce, publish, transmit, distribute, display, modify, create derivative works from, sell or participate in any sale of, or exploit in any way, in whole or in part, any of the Contents or the catalogue. Any use of the catalogue or the Contents, other than for personal use, requires the advanced written permission of Amiad.