Upload
hanguyet
View
225
Download
0
Embed Size (px)
Citation preview
Autodesk Inventor with Tetrix and FTC: Setup• Ensure File Area is correct• Open Inventor and Set Project• Create new .iam file• Importing Tetrix Parts• Where to find the Tetrix Part List
File Area Setup
• Make sure you have the following directory Structure:• Google Drive\Robotics and Intelligent Machines \ Inventor \ Tetrix_Kit_FTC
Note: The Picture on the left has some extra files you do not need at this time.
You can find the Tetrix_Kit_FTC at:\\10.20.16.254\FileServer\Tetrix_Kit_FTC
Set Project in Autodesk Inventor
• Start Autodesk Inventor and Select the Projects Tab• Click “New” and then select “Single User Project”. Click “Next”• Name the Project “Test_Project” and change the Project(Workspace)
folder to the “Inventor” folder in your Robotics Google Drive
For more detailed instructions: Go to http://nebomusic.net/ftc/Lab_FTC_02_Install_AutoDesk.pdf
Follow steps 8 through 10
Find the Part numbers
• Online: http://nebomusic.net/ftc/2015-tetrix-competition-kit-bom.pdf