1

AAUUTTOOCCLLAAVVEESS && SSTTEERRLLIIZZEERRSS

EESSTTAA ––110077 EESSTTEEEEMM AAUUTTOOCCLLAAVVEE

The sterilizer is based on the principle that microbiological action of saturated steam at

elevated temperature is rapid and through. All models work on the principle of downward

displacement of air which is the most economical method of obtaining sterilization. Robust

and rigid construction, designed for all types of bulk sterilization which are commonly

needed in Medical, Agricultural and Pharmaceutical Institutions. Suitable for Sterilizing

hospital dressings, linen, rubber, plastic goods, surgical instruments, glassware’s, utensils

etc. Construction Triple walled with steam jacket and separate boiler Inner chamber and

steam jacket are made up of Heavy gauge S.S. Sheet with leak proof argon-arc welding.

The sterilizer has single piece door made of stainless steel. Back plate and ring is also made

of thick stainless steel sheet. All the sterilizers are hydraulically tested to withstand 2.5 times

the working pressure. Mounted on tubular steel frame with ground leveling screwed flanges.

The Outer jacket is wrapped with asbestos sheet or glass wool to minimize the heat losses

2

due to radiation and is covered by polished stainless steel sheet for that elegant appearance.

Steam Generator Made of heavy stainless steel sheet. Heavy ring mounted in front of the

boiler with folding thick stainless steel plate is fitted with heating elements and low water

level cutoff device to protect the former from burning out dry. Front folding plate system

provides for easy cleaning of the deposited scale on the elements and the walls for long life

and efficiency. Fitted with water gauge glass for water level indication, water inlet and outlet

valves. Pressure Control The “PIEZOSTAT” (Pressure control device) is incorporated in all

electrically operated sterilizers. It economizes on power consumption and reduces the

frequent opening of the steam release valve and thus prevents the release of steam in the

room, It cuts off the power supply to heaters when the set pressure is achieved and re-

energizes the heating elements when pressure falls below the set point. Heating Elements

Flanged type, immersion heating elements are made of high grade material and duly ISI

marked. Safety Door Sterilizer has hinged self-locking single piece thick S.S. plate door and

cannot be opened when under pressure.

The self-locking device automatically disengages the thread mechanism when the sterilizer is

under pressure to preclude any eventuality of accident. Single Point Control Complete

sterilizing cycle is controlled from one point with the help of “Multiport Valve” fitted at front

top. Two speeds of steam exhaust are available; fast and slow. Easily readable jacket and

chamber pressure on gauges mounted on the multi port valve. A moisture trap is fitted in the

chamber discharge line to absorb the condensate automatically to prevent moistening of the

subject matter to be sterilized. Switch Box Houses the PRESSURE STAT (Dansfoss), main

switch, pilot lamps, relays etc. and mounted on the stand of the sterilizer for easy operation.

Other Features • TRIPLE SAFETY: – The Sterilizer is provided with the triple safety features.

3

At the boiler level by a PIEZOSTAT which automatically limits the pressure to the required

set value and a spring loaded safety valve in case of its failure which releases the steam to

keep pressure within the safety limits. At the chamber level, a spring loaded safety valve and

a dead weight release valve to release the steam in case the pressure exceeds the safety limit.

All these safety features function independent of one another and sequentially i.e. one take

over the charge in case of other’s failure. • A plug screen prevents the discharge line from

choking. The plug is easily removable for daily cleaning. • Powerful Ejector for drying

sterilized linen circulates air throughout the chamber. The

circulating air passes through a corrosion resistant metallic wool filter. • A dial thermometer

is provided to show the chamber temperature. • Automatic Vacuum breaker is provided to

break vacuum in case of formation of vacuum due to steam condensation. Operating Temp.

& Pressure Sterilizing Temp : 120°C Sterilizing pressure : 1.2 to 1.5 kg/cm2 (15 psi to 22psi)

Power Requirement : Suitable to operate on 440V volts, 3 ph, 50 Hz, Ac supply Available in

following capacities dia × depth load 400 × 600 mm 6 kw 400 × 1100 mm 9 kw 500 × 900 mm

9 kw 500 × 1200 mm 9 kw Optional Accessories • Chamber/Jacket of S.S. 31• Door of S.S.

304/316 • Dressing Drum• Direct steam supply from centralized boiler • Temperature

recorder • High pressure High vacuum model • Additional door (Double door) model. •

Fully automatic micro processor controlled model Spare Accessories • Pressure

gauge/Compound gauge• Water level gauge glass • Dial thermometer • Non return valve •

Moisture trap • Joint less Gasket :– Neoprene/silicon rubber, size 400mm & 500mm •

Heating elements (Flange Type) Rating kw 6.0, 9.0

4

EE SS TT AA –– 110066 EESSTTEEEEMM AAUUTTOOCCLLAAVVEE ——VVEERRTTIICCAALL

High pressure, electrically heated vertical steam sterilizer is used for sterilization of surgical

instruments, dressing material, linen, rubber, plastic material by means of saturated steam

under pressure of 15 to 20 psi. (adjustable) Apart from health services it is also used in

scientific research institutions and universities. Sturdy double walled construction with

boiler/inner chamber made of stainless steel of 18 SWG 304 sheet. Outer shell is made of mild

steel finished with powder coated paint. The boiler and outer shell is provided with air

insulation. Lid is made of stainless steel plate and is tightened all-around by wing nuts/radial

arms. Molded, joint less gaskets are made of silicon rubber. Sterilizer is hydraulically tested

up to 40 psi. Autoclaves are fitted with water level arrangements to indicate water position

inside the boiler, pressure gauge, Air/steam release cock, spring loaded safety valve which

can be set at any selected point from 10 psi. to 20 psi ± 3 psi. and drain. ISI marked immersion

type heating element heats the water and steam to desired temperature and pressure.

Supplied complete with S.S. basket, cord and plug to work on 220 Volts, 50 cycles AC supply.

5

EESSTTAA––110044 EESSTTEEEEMM AAUUTTOOCCLLAAVVEE ((PPOORRTTAABBLLEE SSTTEERRIILLIIZZEERR))

The body constructed by joint less thick aluminum sheet, lid & ring made of

aluminum silicon alloy die casting, provided with compound pressure and vacuum

gauge self ejecting immersion heater. pressure adjustable from 5to 15, but tested up to

20-25psi, Complete with steam release valve, inner vessel ,iron stand plug connector

to work on 200VAC mains.

6

EE SS TT AA –– 110088 EESSTTEEEEMM AAUUTTOOCCLLAAVVEE

((RREECCTTAANNGGUULLAARR HHOORRIIZZOONNTTAALL SSTTEERRIILLIIZZEERRSS))

The sterilizer is based on the principle that microbiological action of saturated steam at

elevated temp is rapid and thorough. All models work on downward displacement of air

principle which is most economical method of obtaining for all types of bulk sterilization

which are commonly needed in Medical, Agricultural and Pharmaceutical institute Suitable

for sterilizing hospital dressings, linen, rubber plastic goods, surgical instruments, glassware’s

and utensils etc. Construction Robust and rugged all weld construction which is leak proof

unlike riveted construction. Inner chamber is made of thick plate of Mild Steel of non

magnetic stainless steel of 304/316 quality and jacket is made out of rolled steel. Sterilizers

will have single door made out of rolled steel lined with S.S. sheet on both sides. All the

sterilizers are hydraulically tested to withstand 2.5 times the working pressure. The steam

jacket is lined on the outer side with asbestos sheet or glass wool which prevents heat losses

due to radiation and is

covered by strong rolled steel sheet duly painted. Boiler Made of thick stainless steel plate

7

suitably located under the sterilizer. High grade flanged type heating elements are fitted from

front side for easy replacement/repair. Fitted with water gauge glass for water level, safety

valve, water inlet and drain valves. It is also provided with Low Water Level cut off device.

This device protects the heater in the generator from burning out dry. The steam pressure in

the boiler is indicated on an individual pressure gauge. Safety Lock for Door Every horizontal

rectangular sterilizer is fitted with SELF LOCKING SAFETY DOOR which cannot be opened

when the chamber is under pressure.

The clutch mechanism automatically disengages the threads of the radial locking system for

precluding any eventuality of accident when the chamber is under pressure. A heat resistant

Neoprene Rubber gasket ensure steam tight fitting. Pressure Control Electrically operated

Dan Foss (Pressure Control Device) is incorporated in all electrically operated sterilizers. It

economizes power consumption and limits the use of release valve which would frequently

blow steam into the room. It cuts off the power supply to heaters when the set pressure is

achieved and re-energizes heaters when pressure falls down. Sterilization Complete

sterilizing cycle is controlled from one point with the help of “Multi port valve” fitted at front

top. Two speeds of exhaust are available for evacuating.

The Chamber Two separate valves provided for evacuating air and steam from inner chamber

and jacket as and when desired. A steam trap is fitted in the chamber discharge line to

eliminate the condensate automatically. Switch Box Houses the Pressure control switch, Main

switch, Pilot lamps, relays etc. and mounted on the stand of the sterilizer for easy operation.

Other Features • TRIPLE SAFETY: The sterilizer is provided with triple safety. (a) By a

pressure control switch which automatically limits the pressure to the required set valve. (b)

8

Two spring loaded safety valves one each at chamber and boiler level. (c) A dead weight

safety valve at chamber level. • A PLUG SCREEN prevents the discharge line from choking.

The plug is easily removable for routing cleaning. • A powerful Ejector (for drying sterilized

linen) circulates air through the chamber. The circulating air passes through a corrosion

resistant metal wool filter. • A Dial thermometer is provided to show the chamber

temperature. • AUTOMATIC VACUUM BREAKER is provided to break vacuum case of

vacuum formation due to steam condensation.

Operating Temperature and pressure: – • Sterilizing Temp. : 121°C. • Sterilizing Pressure: 1.2

to 1.5 kg/Cm2, (15 psi to 22 psi) Optional Accessories • Chamber/Jacket of S.S. 316 • Door of

S.S. 304/316 • Additional Tray/Shelves • Carriage & Trolley • Direct steam supply from

centralized boiler • Temperature recorder • High pressure High vacuum model • Additional

door (Double door)

model. • Fully automatic micro processor controlled model Spare Accessories •

Pressure gauge/Compound gauge • Water level gauge glass • Dial thermometer • Non

return valve • Moisture trap • Joint less Gasket :– Neoprene/silicon rubber, size : 400 &

500mm • Heating elements (Flange Type) Rating kw 6.0, 9.0 Available in following capacities

W H D load (a) 600 mm × 600 mm × 1200 mm 18 kw Electrically Operated (b) 600 × 900 × 1500

36 kw Electrically Operated (c) 900 × 1050 × 2100 Steam Operated (d) 1050 × 1200 × 2100

Steam Operated

9

EE SS TT AA 110099 FF OO RR PP HH AA RR MM AA II NN DD UU SS TT RR YY

Double door Steam Sterilizer, Hinged Door, Autoclave for HPHV cycle as per General

Technical Specifications enclosed. Extra attachment of Bunk washer with PLC control system

is also provided Size : 600x600x900 600x900x1200 900x900x1200Scope of Supply:- 1) Basic

Unit2) S. S Carriage 1no.3) S. S Floor Trolley 2 nos. 4) Automation - Fully Automatic PLC

based control system Including Pneumatic actuated Valves, Solenoid Valves, Pressure

Transmitter, S.S control Panel etc5) 6pt strip chart recorder with Class - A sensors6) Vacuum

Pump ( Water ring type ) with S.S condenser Autoclave will be in sturdy construction using

plates of appropriate thickness which prevents buckling under vacuum or bulging due to

pressure.

Made to confirm to EN 285 or HTM 2010 performance requirements. II. Fully automatic by

means of PLC based controls, which operate pneumatically actuated solenoid valves.

Provision of four different cycles and programs: 1. Standard cycle 1a. Heat up – ster hold

(1210 C) – exhaust 1b. Heat up – ster hold (1340 C) – exhaust The technique uses the method

of gravity air removal to ensure uniform steam distribution and penetration. Steam trap

equipped with

10

air vent ensure maximum air removal. Useful for sterilization of glass containers i.e.

ampoules, vials, glass bottles etc.It is also useful for Sterilization of glass wares, utensils,

vessels, instruments, rubber articles linen etc. in Laboratories and hospital.2. HP HV cycle 2a.

3 pre ster vacuum pulses – heat up – ster hold – exhaust 2b. 3 pre ster vacuum pulses – heat

up – ster hold – exhaust – post ster vacuum pulsing for drying.

This technique uses near 100% air removal from sterilization chamber which results in better

temperature uniformity in the chamber because of the absence of air pockets i.e. cold spots.

This technique increases the penetration of steam in porous products from which removal of

air is difficult. Vacuum drying at the end of sterilization hold period ensures drying of the

material which has been sterilized. This cycle is useful for garments, fabrics, drying rubber

bungs vessels machine parts etc.3. Leak Test Cycle for periodic testing of door integrity and

pipeline connections & detecting leakage ampoules.4. Another HP HV cycle with post

vacuum pulses can be provided, if required, for special purpose. III General Information – SS

construction with internal contact parts of SS 316.SS construction with Jacket and non contact

parts of SS 304. The unit is mounted on sturdy SS tubular stand with level adjustment facility.

The jacket volume is comparatively large (depth of 50 mm) which ensures better heat

distribution in chamber.IV. No drives are required. For sliding door movement, pneumatic

cylinders are used.V. Autoclaves with hinged doors have mechanical pressure locking device

which prevents opening of doors under pressure. The quick throw lever mechanism ensures

further safety. Door interlocking provision prevents opening of doors under pressure as well

as opening of both doors at the same time – after sterilizing cycle only Aseptic side door can

be opened. Besides this interlocking, a visual indication is also provided.

11

The unit has two safety valves, on the chamber and one on the Jacket, besides having a

pressure switch which shuts off steam supply to the chamber.VI. PLC’s used are Imported

and compatible with P C. SCADA system can be incorporated for remote monitoring OR

monitoring, controlling and data acquisition if required (Optional).VII. Electrical switchgear

of SIEMENS / L & T / TEKNIK make. Cables of ISI brand.VIII. UTILITIES – Raw steam for

jacket supply through your P.R.V Pure steam for chamber supply through PSG (User’s Scope)

Compressed air – through FRL for instrumentation, vacuum through water ring vacuum

pump. Single phase electric supply for control panel and instruments.

EE SS TT AA 111111

This is useful for dentist. The construction is stainless steel with glass beet inside the

chamber.

12

EE SS TT AA -- 110044 AA

Suitable of general laboratory use as well as for field sterilization of instruments and

dressings etc. Dome shaped S.S. lid is provided which seals the autoclave with

neoprene joint less gasket. The lid is tightened to the body when closed. The working

pressure is 1.1 to 1.2 Kg. /cm2 (15-18PSI). The sterilizer is made of S.S. Sheet deep

drawn to cylindrical shape. The seamless construction allows no bacteria residue &

free from dirt accumulation. It is equipped with dial pressure

gauge 0-60 PSI, spring loaded safety valve, dead weight type safely valve and steam

release valve. The load is held in dressing drums (optional), which is supported on a

stand (tripod) the autoclave is hydraulically tested at twice the working pressure as

per ISI requirement. It is fitted with ISI marked heater. Supplied complete with plug

& cord. Suitable to work on 220/230 Volt, single phase, 50 Hz, AC supply. Size 350 ×

300-325 mm Optional Accessories Dressing Drum

13

EESSTTAA––110055 EESSTTEEEEMM AAUUTTOOCCLLAAVVEE ((PPOORRTTAABBLLEESS SSTTEERRIILLIIZZEERR EEXXPPOORRTT

The body is constructed of S.S 304/316 as per ESTA105 but supplied automatic Digital

temp. Controller cum indicator.

14

EE SS TT AA –– 110066AA EESSTTEEEEMM AAUUTTOOCCLLAAVVEE VVEERRTTIICCAALL ((DDEELLUUXXEE MMOODDEELL))

As per IS: 3829 - III, 1985 (REAFFIRMED 2001) The construction as per ESTA-106

but the unit comprises of steam jacket electrically heated inner lid made of

stainless steel work on 3-phase 440A/C 50HZ supply fitted with automatic

pressure control switch safety valve etc Chamber: - The chamber is made of

16SWG304 SS. Pressure gauge, water outlet valve and air inlet valve, SS steam

condenser, tube with SS eject valve. Steam Generator: - The steam generator is

made out of SS heavy gauge fitted with pressure gauge and water draining valve.

Outer cover: - The outer cover is made out of SS duly insulated with high density

mineral wool from the inner chamber and fitted with stable legs. Principle:- The

steam generates from the jacket and gets condensed by the help of the eject valve

which goes through condensing tube the dry steam gets into the chamber to

penetrate into the packs contained in the chamber.

15

EE SS TT AA –– 110066BB EESSTTEEEEMM AAUUTTOOCCLLAAVVEE VVEERRTTIICCAALL ((EEXXPPOORRTT MMOODDEELL))

The autoclave is an export model heaving the facility of automatic digital controller

cum indicator. with safety pressure switch. The top lid and other portion made of

SS304/gun metal duly chrome plated which gives a look to match any world class

autoclave in finish as well as in quality. the equipment is as per the design and

fabrication of Daigger. This autoclave is as per the specifications laid down by ASTM

USA. This equipment has been Manufactured by us first time in India & the same has

been supply to Gulf countries.

16

EE SS TT AA -- 110088AA HHIIGGHH PPRREESSSSUURREE HHIIGGHH SSPPEEEEDD CCYYLLIINNDDRRIICCAALL HHOORRIIZZOONNTTAALL

SSTTEERRIILLIIZZEERR

Details are as per ESTA-107, but size 400 mm dia × 600 mm depth. It is fitted with 18

KW electric heaters to finish the sterilization within 6 minutes of achieving the desired

pressure of 2.2 kg/CM2 and corresponding saturated steam temperature of 134° C.

Primarily it is intended for emergency sterilization of unwrapped surgical

instruments and other components. Supplied complete with cord and plug to operate

on 440 volts, three phase, 50 Hz AC supply. Capacity dia × depth load 400 × 600 mm

18 kw

17

EE SS TT EE –– 110011 EESSTTEEEEMM EETTHHYYLLEENNEE OOXXIIDDEE SSTTEERRIILLIIZZEERR

Ethylene Oxide Sterilizer suitable for sterilization of Catheters Disposable. The unit is

made out of stainless steel 304 chambers. Stainless steel back plate as well as S.S.

/M.S. door. The unit is having individual valves for exhaust, allowing gas in the

chamber and for vacuumising. The unit is having vacuum pump, chamber heating

and control system. Table top model suitable for 2 Nos. Sterilizing Baskets. The unit is

having facia panel. All accessories pump etc. are enclosed with stainless steel cover.

Gauges and controls are provided in the facia panel. This model is specially designed

for Hospitals and Research Lab. The unit is suitable for 10: 90 EO: CO2 or 12: 88 EO:

F–12 mixture. Table top model are having following sizes • Cylindrical Model 300

mm (Dia) × 500 mm

Depth) 450 mm (Dia) × 450 mm (Depth) • Rectangular Model 250 (H) × 300 (W) × 550

(D) mm. 250 (H) × 300 (W) × 800 (D) mm.

18

EE SS TT EE –– 110022 EESSTTEEEEMM EETTHHYYLLEENNEE OOXXIIDDEE SSTTEERRIILLIIZZEERR

Free standing bulk model Suitable for large Hospitals & for small manufacturing

units. Suitable for 10/90 EO/CO2 mixture or 90/10 EO/CO2. • Cylindrical Model 400

Dia × 600 mm 500 Dia × 1200 mm • Rectangular Model 600 (H) × 600 (W) × 1200 (D)

mm. 900 (H) × 600 (W) × 1500 (D) mm. Other sizes on request.

19

ESTEEM DENTAL AUTOCLAVE

EST-DA SERIES- ESTEEM DENTAL AUTOCLAVE

Esteem Glass Bend Sterilizer complete body made of complete stainless steel with

inner chamber also made of thick stainless steel, thermostatically controlled for

temp from 50°C to 300°C. Supplied complete with glass beads suitable for instant

sterilization of needles, forceps, beads etc. We at Esteem Industries INC are the

Manufacturer & exporter of Glass Bead Sterilizers for more than a decade. We have

supplied our units to over 26 countries and they are being used by various

professionals. Glass Bead Sterilizer is also being used as medical sterilizing

equipment, dental sterilizing equipment, biotechnology sterilizing equipment,

podiatric-sterilizing-equipment. In continuation to our existing models Glass Bead

Sterilizers, we have developed new innovative Models EST-DA500, EST-DA-1000,

and EST-DA2000 - these units are incorporated with a digital temperature indicator

which continuously display the temperature being maintained in the glass beads.

The units continue to be an effective method of sterilization, killing all spores,

bacteria, within 10 seconds.

20

TECHNICAL SPECIFICATIONS

IMAGES

&

SPECIFICATIONS

EST-DA- 500

EST-DA- 1000

EST-DA- 2000

1. Cabinet Size L × W

× H

145 x 140 x 325

mm.

155 × 155 × 370

mm

125 × 143 ×

385 mm

2. Crucible (Brass) size 50 mm. Dia x 75

mm. Depth

50 mm dia. ×

137.5 mm Depth

50 mm dia. ×

162.5 mm Depth

3. Preset Temperature

Range 230°C - 250°C 245°C - 265°C 230°C- 250°C

4. Initial Stabilization

Time 30 Minutes 30 Minutes 30 Minutes

5. Weight (Inclusive of

Glass Beads) 5.3 kgs. 6.2 kgs. 6.4 kgs.

6. Power Consumption 30 units (for 25

working days)

50 Units (for 25

working days)

50 Units (for 25

working days)

7. Wattage 150W single phase 250 W Single

Phase

250 W Single

Phase

8. Input 220V/50Hz or

110V/50Hz

220V/ 50 Hz or

110V/ 50 Hz

220v/50Hz or

110v/50 Hz

NOTE: Temperature Range/ Input Voltage can be set to Customer's

Specifications.

21

PRICE AND PACKING SPECIFICATIONS

QUANTITY PRICE

MODEL EST-DA- 500

MODEL EST-DA- 1000

MODEL EST-DA- 2000

1 Unit (upto 10

Units) US $ 150.00 US $ 180.00 US $ 210.00

Extra Glass Beads (

per filling ) US $ 9.00 US $ 12.00 US $ 15.00

GLASS BEADS CLEANING INSTRUCTIONS

¤ We suggest that glass beads be replaced at least once in 3 months.

¤ Instructions for cleaning glass beads (at least once every 2 weeks) - Remove glass

beads once the unit is completely cool.

¤ Wash with mild soap, rinse and dry thoroughly before reuse.

¤ Prices include Shipping and Handling.

¤ All units are supplied with one filling of glass beads.

22

PAYMENT TERMS COMMON FOR ALL THE ABOVE MENTIONED MODELS

PAYMENT TERMS :

Who are our Bankers and what are our Banking particulars?

Who are our Bankers and what are our Banking particulars? Our Bankers are: Union Bank Of India, SCF-3, Sector 21-C, Chandigarh, UT, INDIA. SWIFT CODE: UBININBBCHA Esteem Industries INC. A/C No.: 398905010050309 May you like to Transfer Payment (T/T) to us, then depending upon the currency of remittance kindly choose one of the following methods: PAYMENT PROCEDURE FOR USD $ PAYMENT PROCEDURE : For making SWIFT Transfer payment of US$ ______, please give the following information to your bank: Intermediary Banks: 1. Citibank. New York ,Swift code: CITIUS33 2. Bank of America. New York, Swift code: BOFAUS3N 3. Bank of New York. New York, Swift code: IRUTUS3N 4. Standard Chartered Bank. New York, Swift code: SCBLUS33 5. JP Morgan Chase Bank. New York, Swift code: CHASUS33 6. American Express Bank. New York, Swift code: AEIBUS33 Beneficiary Bank: Union Bank Of India, SCF-3, Sector 21-C, Chandigarh, UT, INDIA. Swift Code: UBININBBCHA Beneficiary: Esteem Industries INC Account No. 398905010050309 Bank charges (fees) would be shared by buyer. Please fax us a copy of Transfer advice so that we can track payment. PAYMENT PROCEDURE FOR GBP £ PAYMENT PROCEDURE : For making payment of Sterling Pound £_______, please give the following information to your bank: Intermediary Banks: 1. National Westminster Bank. London, Swift code: NWBKGB2L 2. HSBC London (Midlands), Swift code: MIDLGB22 Beneficiary Bank: Union Bank Of India, SCF-3, Sector 21-C, Chandigarh, UT, INDIA. Swift Code: UBININBBCHA Beneficiary: Esteem Industries INC Account No. 398905010050309 Bank charges (fees) would be shared by buyer. Please fax us a copy of Transfer

23

advice so that we can track payment. PAYMENT PROCEDURE FOR EURO PAYMENT PROCEDURE : For making payment of Euro_______, please give the following information to your bank: Intermediary Bank: 1. Commorz Bank Dusseldorf Germany, Swift code: COBADEDD 2. Bank commercial Italiana, Swift code: BCITITMM 3. Societe Generale Paris, Swift code: SOGEFRPP 4. ABN Amro Bank. Amsterdam, Swift code: ABNANL2A Beneficiary Bank: Union Bank Of India, SCF-3, Sector 21-C, Chandigarh, UT, INDIA. Swift Code: UBININBBCHA Beneficiary: Esteem Industries INC Account No. 398905010050309 Bank charges (fees) would be shared by buyer. Please fax us a copy of Transfer advice so that we can track payment. Note: Please make sure we are INFORMED before and after sending any payment to our Bank Account.