Upload
others
View
2
Download
0
Embed Size (px)
Citation preview
Auto IDGeneral Catalogue
BARCODE READERS
2D CODE READERS
AUTO ID DATA CONTROLLERS
2
SETTING A NEW STANDARDfor code reading combining performance and reliability
READ! VISUALISE!
Advanced decoding algorithms provide best-in-class reading capability.
View reading performance and ensure stable operation without a PC!
3
FIXED-TYPE READERS/CAMERA TYPE
6Autofocus
SR-1000 SeriesSetting the standard for code reading
12PoE
SR-750 SeriesStable reading for difficult-to-read 1D and 2D codes
13Ultra Compact
SR-700 SeriesHigh performance reading in a compact body
FIXED-TYPE READERS/LASER ∙ CCD TYPE
16Digital, Laser Type
BL-1300 SeriesHigh speed and high resolution 1D compact code reader
18Long-range, Laser Type
BL-700 SeriesUltra long range and outstanding angle capabilities
19Ultra Compact, CCD Type
BL-180 SeriesUltra-compact size, half the size of a business card
PERIPHERAL EQUIPMENT
20AutoID Data Controller
DV-90 SeriesVerifies, evaluates and converts data to I/O signals
21RS-485 Master Unit
N-410 SeriesSupports Multi-Drop and Multi-Head Mode
22Dedicated Power Supply/ Communication UnitsSelectable to match the specifications of the device
HANDHELD-TYPE READERS
24DPM Code Model
SR-G100Easy to read challenging codes
261D and 2D Code Model
HR-100 SeriesWide target area and high-speed response
27Barcode Model
BL-N70 SeriesVarious communication models are available to connect with different PC or PLC systems.
Auto IDEASY-TO-USE HIGH PERFORMANCE
CONNECT!
Communication with a variety of controllers, such as PLCs and laser markers, is possible! This makes it possible to construct systems that match their environments.
4
Selecting the correct parts for assembly
Identify which parts should be selected for assembly by reading a code containing the information.
Differentiating door part types
Prevent assembly error and manage production history for traceability.
Identify which engine type is present by reading a 2D code marked on the engine.
Reading the engines handled by Gantry loaders
Identifying crankshafts for traceability
Confirm which product is present regardless of code position with the code reader’s wide field of view.
Traceability at manual operation
Read codes stably on metallic and cylindrical surfaces. Stable reading reduces cycle time.
Identify which parts are rolling down a conveyor by reading 1D codes printed on the labels.
Reading metal billet IDs
Managing traceability for injectors
It can read quickly, reducing the glare on the black resin cylinders.
Traceability management for headlight
Read codes on label regardless of code position with the code reader’s wide field of view and far distance reading.
Read a code marked on the product to confirm the correct part is present before assembly.
Identifying correct product before assembling
APPLICATIONS
AUTOMOTIVE/CHASSIS ASSEMBLY
METALS/MACHINING
PLASTICS/MOULDING
Identification solutions for every industry and every application. KEYENCE is dedicated to providing solutions for product traceability and management. A full line of 1D and 2D code readers, along with dedicated control and communication devices, ensures complete and reliable solutions.
5
Label detection
Verify presence of a barcode when applying packaging labels, even at high speeds.
Correct product identification
Confirm the correct product is present by reading the barcode data on the packaging.
Confirm if the correct part is present at the correct time by reading the barcodes printed on the packaging.
Prevent incorrect mixing of products
Identify several IC parts at once
Read codes on several IC parts at once to confirm that all are present.
Identify codes marked on lead frame
Trace product history throughout the entire process by reading a 2D code marked on the copper lead frame.
Check that the correct PC board is present at the correct time by reading 2D codes marked on the boards.
Confirm PC board presence
Data verification
Inkjet printed codes on an uneven background (cardboard) can be read stably.
Wafer identification at FOUP station
Identify which wafer is present when loading and unloading by reading a 2D code marked on the wafer.
Ensure the correct carrier is present by reading a 1D or 2D code.
Carrier identification
FOOD/PHARMACEUTICALS
SEMICONDUCTORS/ICS
OTHERS
PRESS THE BUTTON
SET-UP COMPLETE
1
2
3
AUTOFOCUS
The reader can be mounted at any distance. (1000 mm max.)
AUTOMATIC TUNING
Determines optimum settings for exposure time, image processing filter, etc. [Approx. 750000 combinations]
AUTOMATIC POLARISATION
Glare can be eliminated. Reader angle adjustment or external lighting becomes unnecessary.
6
SR-1000 Series
Autofocus 1D and 2D Code Reader
0.063 mm
SMALLEVEN IF THE CODE IS
Distance: 110 mm
CHANGESEVEN IF THE POSITION
FAREVEN IF THE DISTANCE IS
Distance: 1000 mm
1.6× LONGERthan conventional models
Range: 290 mm × 220 mm
4× WIDERthan conventional models
7
BleedingNylon resinBlack resin Trapezoidal distortion
Brass Thick printing Tread barrel distortion
PCB Thin printing Parallel distortion
Ceramic
Example codes requiring brightness correction Example codes requiring filteringExample codes requiring threshold correction Example codes requiring geometric correction
Low contrast
Automatically configures various combinations of exposure time, dynamic range and gain in order to achieve the optimal brightness.
Automatically corrects black/white thresholds and optimises the contrast between code and background.
Automatically selects the best filter and filtering intensity to correct the captured image.
Corrects distorted codes, such as those on cylinders and other round surfaces or when the reader is mounted at an angle.
CAPTURE BRIGHTNESS CORRECTION
CONTRAST THRESHOLD CORRECTION
FILTER CORRECTION
GEOMETRIC CORRECTION
AUTOFOCUS
AUTOMATIC TUNING
Mounting is less restricted by the performance or
specifications of the code reader itself, thus improving
flexibility in machine designing for production lines
and jigs.
The code reader automatically optimises the exposure
time, image processing filter and other parameters
according to the target and mounting distance.
EASY SET-UP BY “JUST PRESSING THE BUTTON”1
EASY SET-UP BY “JUST PRESSING THE BUTTON”2
8
Without polarisation filter With polarisation filter
Conventional model SR-1000
DPM ON CAST SURFACE
METAL
ERR
ERR
ERR
OK
OK
OK
Light is concentrated effectively within the field of view to provide high intensity illumination.
With polarisation filter (polarised light)
AUTOMATIC POLARISATION CONTROL
The code reader automatically removes glare and eliminates the need for
mounting angle adjustment or external lighting during installation. When
combined with the autofocus function, mounting becomes highly flexible.
EASY SET-UP BY “JUST PRESSING THE BUTTON”3
Without polarisation filter (direct light)
HAIRLINE
METAL
CYLINDER
BLACK RESIN
NEW OPTICAL DESIGN FOR STABLE READING
CPC (COMPOUND PARABOLIC CONCENTRATOR) ILLUMINATIONA specially shaped reflector has been designed to create high efficiency
illumination by reducing loss in light intensity from the high intensity LEDs.
Gold plating maximises the reflectance to achieve brightness exceeding
conventional levels by 400%. This provides reading under bright, uniform
illumination even at long ranges.
F I RST- IN - I TS -C LASS , BU I LT- IN OLED D ISP LAY
VAR IOUS INTERFACE CAPAB I L I T I ES AND EXPANDED FUNCT IONAL I TY
9
OK/ERROR count display
Data communication condition display
Readout data display
I/O signal behaviour displayEthernet setting data
Live View
CHECK OPERATION ON-SITE WITHOUT A PC
There is no need for a personal computer or monitor in the facility. The code position adjustment and operating condition can be
checked simply with the intuitive built-in display.
PUSH!
EXTRACTING SPECIFIC DATA CONTROLLING OUTPUT SIGNALSINSERTING ADDITIONAL INFORMATION TO IMAGE FILE NAMES
Connection information for various PLC types can be found here: www.barcodereader.com
COMPATIBILITY WITH VARIOUS COMMUNICATION PROTOCOLSBuilt-in EtherNet/IPTM, PROFINET, and PLC link protocols make PLC connections
easier. In addition, general-purpose TCP/IP and FTP communications are also
supported. With FTP communication, transmission of not only images but also
text data is also possible.
CUSTOMISABLE OUTPUT FORMATS USING DATA EDIT FUNCTIONThanks to customisable output formats for the code reader, programming corrections on the host side (PC, PLC, etc.) are not
required, allowing for shorter data processing time.
EXAMPLES OF DATA EDIT FUNCTION IN USE
Read OK 01
Read OK 02
Read OK 01
Read NG 01
OK/NG output based on vertex coordinates of code
0 1 2 3 4 5 6 7 8 9 9 8
12578
NGOK
OPT IONAL ACCESSORY L INEUP
10
0.025 mm
Bright field
Dark field
High resolution attachment SR-10AH
Improved reading of extremely small codes and codes printed on mirror finished surfaces.
8.0 mm
4.5times
3.5 mm
5.5 mm 11 mm
SR-D100HAConventional model
Increased by
20 mm
40 mm
to
Conventional model
SR-1000+
SR-10AH
DEAD SPACE
Mounting image
VARIABLE INSTALLATION DISTANCE FOR
EXTREMELY SMALL CODES
When KEYENCE’s test codes are usedCell size 0.040 mm
FIELD OF VIEW:
INCREASED BY
Comparison with conventional modelsMounting distance 40 mmWhen the image capturing range is 800 × 600 pixels
4.5 times
HIGHLY FLEXIBLE MOUNTINGComparison with conventional models
AUTOMATIC CONTROL OF OPTIMAL READING CONDITIONSWhen auto-tuning is enabled
IMPROVED READING OF EXTREMELY SMALL CODES
Micro-size sample (chip LED) Mirror finished surface (wafer) Metal (IC package)
3 mm
APPLICATION EXAMPLES
11
CONTROL CABLE
ETHERNET CABLE
USB CABLE
NFPA79 compliant control cable with D-sub 9-pin2 m: OP-875275 m: OP-87528
10 m: OP-87529
USB cable plugA-miniB2 m: OP-51580
Control cable2 m: OP-872245 m: OP-87225
10 m: OP-87226
NFPA79 compliant control cable
2 m: OP-873535 m: OP-87354
10 m: OP-87355
NFPA79 compliant Ethernet cable2 m: OP-872305 m: OP-87231
10 m: OP-87232
PC
For setup
Serial communication, PLC link
POWER SUPPLY
HOST
Cable
• AutoID Network Navigator• AutoID Keyboard Wedge• AutoID Terminal• MultiMonitor• FileView• Various driver files• EDS/GSDML files• Sample Windows programs
Mounting bracket OP-87866
High resolution attachment SR-10AH
* SR-1000 only
Adjustable bracket OP-88002
Reflector attachment SR-10AR
Standard type SR-1000
Wide-field type SR-1000W
PC for setup
Setup Software SR-H6W
PC/Panel PC/Board PC
PLC
HMI [Touch panel]
24 VDC power supply
TCP/IP, FTP, PLC link
SR-1000 Series
24 VDC
RS-232C
I/O terminal
Ethernet
USB
Ethernet
SYS TEM CONF IGURAT ION D IAGRAM
12
CABLES
CONFIGURATION SOFTWARE
High-resolution type
SR-750HAClose-range type
SR-750Middle-range type
SR-751Long-range type
SR-752Long-range type + lens
SR-752 + SR-75L4Long-range type + lens
SR-752 + SR-75L6
Minimum resolution 0.082 mm 0.127 mm 0.19 mm 0.19 mm 0.33 mm 0.5 mm
Focal distance 38 mm 60 mm 100 mm 250 mm 400 mm 600 mm
Reading distance(mm)
0
50
100
150
200
250
300
350
400
450
500
550
600
650
700
Lens attachment SR-75L4/75L6
The detection distance can be extended further by installing the attachment on the SR-752 long-range type.
The reading range above is a value measured with a KEYENCE test label. Max. 305 mm, 490 mm, and 690 mm are for DataMatrix (cell size 0.5 mm).
Max. 305 mm
Max. 490 mm
Max.690 mm
Minimum resolution
0.082 mm
LENS ATTACHMENT
400 mm lens: SR-75L4600 mm lens: SR-75L6
NFPA79 compliant Control cable w/connector
2 m: OP-875275 m: OP-8752810 m: OP-87529
Ethernet plug assembly
OP-87362
Control cable
2 m: OP-872245 m: OP-8722510 m: OP-87226
NFPA79 compliant Control cable
2 m: OP-873535 m: OP-8735410 m: OP-87355
Setup software SR-H6W
NFPA79 compliant Ethernet cable
2 m: OP-873595 m: OP-8736010 m: OP-87361
SR-750 Series
PoE & Compact 1D and 2D Code Reader
MODEL L INEUP
FOUR MODELS AND DEDICATED LENS ATTACHMENTS TO SUPPORT VARIOUS READING CONDITIONSThe four models of the SR-750 Series cover a wide range of applications from reading tiny codes printed on very small parts to reading codes from a long distance.
13
N-R4 RS-485 N-410K RS-232C
N-R2 N-R4
N-L20N-UB
RS-232C
USB
N-R2 RS-232C
N-R4 RS-422A
N-UB USB-COM
EthernetN-L20
PC
PLC
TCP/IP, FTP, PLC link
HOSTRS-422A/485
Ethernet
SR-700Series
SYSTEM CONFIGURATION DIAGRAM
NX-CO3R (3 m)NX-CO5R (5 m)
EXTENSION CABLESR-700HAHigh-Resolution
SR-700Close-Range
SR-710Middle-Range
Minimum resolution 0.082 mm 0.127 mm 0.19 mm
Focal distance 38 mm 60 mm 100 mm
Reading distance(mm)
0
50
100
150
200
Minimum resolution
0.082 mm
Setup software SR-H6W
CONFIGURATION SOFTWARE
MODEL L INEUP
SR-700 Series
Ultra Compact 1D and 2D Code Reader
SMALLEST IN ITS CLASS WITH OUTSTANDING EASE-OF-USEKEYENCE focused on functionality and ease-of-use, while designing the smallest 1D and 2D code reader in its class.
14
SETUP SOFTWARE SR-H6W
Monitor the field of view to adjust the position of the code.
The focus is adjusted automatically.
Automatically selects from about 750000 parameter combinations and whether or not to enable the polarisation filter.
TRIGGER SETTINGS (I/O input, command input)
STEP
1DESTINATION FOR READ DATA (Field network, PC)
STEP
2
COMMUNICATION PROTOCOL (EtherNet/IPTM, PROFINET, TCP, UDP, or PLC link)
STEP
3ADVANCED SETTINGS (Detailed setting for each protocol)
STEP
4
EASY-TO-USE HIGH PERFORMANCE
Anyone can easily configure advanced reading settings
and optimal communication settings. What’s more,
the improved measurement modes support accurate
and reliable operations.
EASY SETUP
Simple Tuning steps allow for quick configuration; automatically
configuring the SR Series with optimal reading conditions.
ETHERNET COMMUNICATION WIZARD
Setup can be completed in just four steps with a question-answer form including visual explanations. In previous versions, the user
needed to understand the settings available on the screen and determine which items required input.
The new version uses a setup wizard to eliminate the need of item extraction, reducing man-hours for communication setup.
15
SPECIFICATION AND INSTALLATION CHECK
OPERATIONAL TESTING AND MAINTENANCE
SIMPLE OPERATIONS
LIVE VIEW & READING TEST: Reduce manhours for setup by executing reading tests: check read rate, decode time, and determine which banks are best used for reading.
AUTO ID TERMINAL: Establishes direct communication with the code reader in order to isolate problems due to communication.
AutoID KEYBOARD WEDGE: Just like when a handheld reader is used, data can be output to a spreadsheet.
INSTALLATION GUIDE: Selecting the optimal reader model and a preview of the field of view can be done based on code size and working distance.
MULTI-MONITOR: See Live Images from up to 16 connected Readers at once to monitor operation.
A B C
1
2
3
4
1 2 3
16
BL-1300 Series
Ultra-Compact Digital Barcode Reader
NEW HIGH-SPEED MOTOR AND RECEIVER LENSBL-1300 Series models have a high-speed motor 2.6 times faster than previous models, enabling performance of 1300 scans and 1300 decodings per second. KEYENCE has also developed a new aspherical lens that has doubled the intensity of the received beam (the read source), reducing noise and increasing the effective label reading distance.
HIGH-SPEED PROCESSING CIRCUITThe new HPPE* in BL-1300 Series models provides about 100 times the information processing capacity of previous models, providing reading performance that combines high speed and high precision.
* HPPE···Hi-Speed Parallel Processing Engine
CODE39: 16 digits
100% decoding rate at 1300 scans/sec is unmatched by conventional barcode readers
New high-speed motor (2.6 times faster than previous models) and high-speed processing engine (HPPE*).* HPPE = Hi-Speed Parallel Processing Engine
HI-SPEED
Minimum readable narrow bar width: 0.08 mm
Digital processing guarantees stable decoding of barcodes with incredibly small margins. This allows codes to be printed smaller without the worry of noise affecting the reader.
HI-RESOLUTION
New digital processing reads very low quality codes
A new edge detection process accurately extracts the points of alternation between bars and spaces in even the most difficult-to-read barcodes, while digital compensation makes it possible to read varying narrow/wide ratios.
HI-PERFORMANCE
17
NX-CO3R (3 m) NX-CO5R (5 m) NX-CO8R (8 m)
EXTENSION CABLECONFIGURATION SOFTWARE
Front Type Side TypeStandard Range High Accuracy Long Range High Accuracy
Single Line BL-1300 BL-1300HA BL-1370 BL-1350HARaster BL-1301 BL-1301HA BL-1371 BL-1351HA
Converts to easily decodable information
Controls the waveform of the received beam to set its amplitude to a level suitable for reading.
Accurately detects the points of alternation between bars and spaces
Acquires the received beam waveform in 10-bit gradations and applies differentiation (shown in waveform diagram on the left).
Removes noise components (signals not relevant to the code information) such as faint printing and background patterns.
Detects points of alternation between bars and spaces (edges).
Modifies the narrow/wide ratio to enable accurate decodingIdentifies bars and spaces from extracted edges. Adjusts the narrow/wide ratio to eliminate the negative impact of running print ink and reader mounting angle.
Scans barcode
Received beam waveform
Binarised waveform
Differential process waveform
AGC
DifferentialProcessing
NoiseReduction
EdgeDetection
NewDecodingEngine
NewDecodingEngine
AGCConverted to
appropriate level
The received beam waveform is converted to a 10-bit digital waveform.
The amount of change increases at the point of alternation between space and bar.
Creates emphasised waveform at point of alternation.
Extracts amount
of change
Modifies ratio
Side typeFront type
THE ORIGINAL DIGITAL PROCESSING TECHNOLOGY SOLVE TYPICAL READING PROBLEMS
Setup softwareSR-H6W
MODEL L INEUP
Reading from diagonal orientation (pitch angle)
Thick print lines
Problem: Spaces are extremely narrow
PREVIOUSMODELS
PREVIOUSMODELS
Thick print lines prevented adequate space between bars, forcing the reader to move to the next bar without obtaining the proper amplitude.
When reading from an angle, previous models couldn’t receive adequate beam intensity, and barcode recognition failed.
BL-1300 Series use noise reduction and edge detection to recognise the difference between spaces and faint printing, enabling accurate decoding.
BL-1300 Series reliably detect edges to recognise barcodes, and use New Decoding Engine to compensate for bar width ratio variations created by tilted orientations.
Problem: Drop in received beam intensity, bar ratio variations
NEW DECODING PROCESS PROVIDES UNRIVALED READING PERFORMANCE:
SOLUTION
SOLUTION
18
Vertical mounting Horizontal mounting Direct wall mounting
BL-700 Series
Long Distance Laser Barcode Reader
With KEYENCE’s laser technology, the BL-700 Series allows an ultra-long distance read. Even if the target size varies, the AGC function ensures a reliable reading through an unparalleled reading depth.
LONGEST READING RANGE IN ITS CLASS: 1.2 m
The slanted corner of the housing allows the cable to be routed in any direction. Since the BL-700 Series requires no space for a connector, it can be neatly mounted anywhere, such as the side of a conveyor, in a space just as large as its body size.
SPACE-SAVING, SLANTED-CORNER DESIGN
With a 32-bit RISC CPU chip and KEYENCE’s control technology, the BL-700 Series achieves 700 scans (700 decodings) per second. An ultra high-speed response that reliably reads barcodes moving at high speed on production lines.
HIGH SPEED: 700 scans/s
High-resolution Middle-range Long-rangeSingle Line BL-700 BL-740 BL-780
Raster BL-701 BL-741 BL-781
MODEL L INEUP
SUPERIOR READING ANGLE CAPABILITIESKEYENCE’s original AGC (Auto Gain Control) provides superior angle reading capabilities. This revolutionary reading capability is outstanding compared to other models.The BL-700 Series provides reliable reading regardless of the orientation or size of the labels.
Reads labels within the range of -55 to +55° angles.
+27˚ +30˚–13˚ –5˚
BL-700
19
The LED shows the performance rate with three colours: green, orange, and red.
Front typeBL-180
Side typeBL-185
80 mm
MODEL L INEUP
BL-180 Series
CCD Barcode Reader
The BL-180 Series features a highly visible STABILITY LED indicator. The optimal mounting position can be determined quickly and easily. Moreover, reading errors can be prevented by checking the reading performance rate or the decode count output.
STABILITY LED FOR EASY MOUNTING
READS BARS AS NARROW AS 0.125 mmThe high-resolution of the BL-180 Series can read bars narrow as 0.125 mm
EXCELLENT READING DEPTH OF ±10 mmReading can be performed even when there are vibrations or height variations in the targets. KEYENCE’s original optical technology and high intensity LED ensure a reading depth of ±10 mm, which enables stable reading.
The BL-180 Series ultra-small CCD barcode reader is easily mounted in any device, allowing the complete system to be downsized. Despite the small size, KEYENCE’s original optical technology achieves a built-in decoder and reads labels as wide as 80 mm.
ULTRA-SMALL BODY 47 × 55 × 20 mm READS LABELS AS WIDE AS 80 mm
20
Barcode reader DV-90Comparison
result
Output
Readout data Output NO. Preset data
DV-90 Series
AutoID Data Controller
The DV-90 compares the data acquired with a code reader to the data registered in advance (preset data) for verification. The evaluation result is output in parallel*. Easy settings without the need for difficult PLC programming.*The output can be selected from bit, binary, and BCD. Up to 900 pieces of master data can be registered.
IMMEDIATE VERIFICATION/
EVALUATION OF CODE DATA
DV-90NE (NPN Type)DV-90PE (PNP Type)
MODEL L INEUP
Prevent incorrect products from being packed
Provide instructions during the assembling process
Prevent careless mistakes during the packaging process
Prevent mistakes when filling chemical bottles
APPLICATION EXAMPLES
PORT1 RS‐232C
Lamp
Buzzer
Synchronisation inputParallel
output
HR Series
Code ReaderBL/SR Series
Code ReaderBL/SR Series
Photoelectricsensor, etc.
USBComputer
PLC
Computer
PLCPORT2 RS‐232C
DV-90
21
SR-700/BL-1300/BL-700/BL-180
N-410K
Host computer
RS-232C
Communication unit N-R4*/N-48
Sensor for synchronisation
SR-700/BL-1300/BL-700/BL-180
N-410K
RS-485
RS-232C
Communication unit N-R4*/N-48
Sensor for synchronisation
N-410 Series
Multi-Drop Controller
The N-410K controls several code readers as if they were a single unit, without using a host computer. This mode is useful when the position of labels varies between work pieces.
MULTI-HEAD MODEThe N-410K controls several code readers so that they scan alternately, eliminating mutual interference. This function is useful when several code readers must be installed close to each other to read a label with multiple codes.
MUTUAL INTERFERENCE PREVENTION FUNCTION
Host computer
The N-410K polls (requests data from) each code reader, and it transmits the obtained data to the host computer.
N-410K
RS-232C
RS-485 Master Unit
RS-485
Up to 31 code readers can be controlled simultaneously.(Maximum total cable extension: 1.2 km)
No data56784321
8901• • • • • • • • • •%P02-00085678%P02-00084321%P03-00088901
* The device that can be connected to the N-R4 is the SR-700/BL-1300. * The device that can be connected to the N-R4 is the SR-700/BL-1300.
22
DEDICATED POWER SUPPLY/COMMUNICATION UNITS
Power Supply/Communication Units
N-R2 N-R4 N-UB N-L1 N-L20
Connectable code reader
SR-700 ü ü ü ü ü
BL-700 ü*1 ü*1 ü*1 ü*1
BL-1300 ü ü ü ü ü
BL-180 ü*1 ü*1 ü*1 ü*1
HR-100 ü*5 ü*5 ü*5 ü*5
HR-100B ü*7
SR-1000
SR-750
Connector type 12 pin round connector
Power typeDC ü ü ü ü ü
AC
Interface
RS-232C ü
USB ü
RS-422A ü
RS-485 ü*3
Ethernet(TCP) ü ü
Field networkEtherNet/IP™ ü
PROFINET ü
Power Supply/Communication Units AutoID Data Controller Multi-Drop Controller
BL-U2 N-42 N-48 DV-90 N-410K
ü*2 ü*2 ü*2 ü*2 ü
ü ü ü ü ü
ü*2 ü*2 ü*2 ü*2 ü
ü ü ü ü ü
ü*6 ü*6 ü*6 ü*6
ü*8 ü*8 ü*8 ü*8
ü*4
ü*4
D-Sub 9 pin D-Sub 25 pin
ü ü ü ü ü
ü ü ü
ü
ü
ü*3
Model Type
OP-80616 Round 12 pin connector - D-sub 9 pin Conversion connector (0.2 m)NX-C03R Extension Cable (3 m) for Round 12 pin connectorNX-C05R Extension Cable (5 m) for Round 12 pin connectorNX-C08R Extension Cable (8 m) for Round 12 pin connectorNX-CD2M D-sub 9 pin connector - Round 12 pin Conversion ConnectorOP-35331 USB cable (3 m)
Model Type
OP-22149 D-sub 25 pin cross connector
OP-27937 D-sub 9 pin - D-sub 9 pin cross cable (2 m)
OP-29859 D-sub 9 pin - D-sub 9 pin straight cable (1.5 m)
OP-29860 D-sub 25 pin - D-sub 9 pin straight cable (1.5 m)
OP-25057 D-sub 9 pin - D-sub 25 pin Conversion Connector
OP-88081 D-sub 9 pin cross connector (without 9 pin)
OP-87533 D-sub 9 pin cross connector
OPTION
NX-CD2MNX-C03ROP-80616
23
FIXED-TYPE READERS
HANDHELD-TYPE READERS
N-L20
DEDICATED POWER SUPPLY/COMMUNICATION UNITS
OPEN F I E LD NETWORK SUPPORT
PC
PLC
HOST
TCP/IPBL-1300SR-700
HR-100BHR-100
BL-180BL-700
BL-N70
Power Supply/Communication Units
N-R2 N-R4 N-UB N-L1 N-L20
Connectable code reader
SR-700 ü ü ü ü ü
BL-700 ü*1 ü*1 ü*1 ü*1
BL-1300 ü ü ü ü ü
BL-180 ü*1 ü*1 ü*1 ü*1
HR-100 ü*5 ü*5 ü*5 ü*5
HR-100B ü*7
SR-1000
SR-750
Connector type 12 pin round connector
Power typeDC ü ü ü ü ü
AC
Interface
RS-232C ü
USB ü
RS-422A ü
RS-485 ü*3
Ethernet(TCP) ü ü
Field networkEtherNet/IP™ ü
PROFINET ü
Power Supply/Communication Units AutoID Data Controller Multi-Drop Controller
BL-U2 N-42 N-48 DV-90 N-410K
ü*2 ü*2 ü*2 ü*2 ü
ü ü ü ü ü
ü*2 ü*2 ü*2 ü*2 ü
ü ü ü ü ü
ü*6 ü*6 ü*6 ü*6
ü*8 ü*8 ü*8 ü*8
ü*4
ü*4
D-Sub 9 pin D-Sub 25 pin
ü ü ü ü ü
ü ü ü
ü
ü
ü*3
*1 NX-CD2M is required. *2 OP-80616 is required. *3 N-410K is required as a master unit. *4 OP-87533 + OP-87527/87528/87529 are required. *5 HR-1C3RC + OP-87533 + NX-CD2M are required. *6 HR-1C3RC + OP-87533 are required. *7 HR-UC1 + HR-1C3RB + OP-88081 + NX-CD2N + OP-87530 + OP-99032 are required. *8 HR-UC1 + HR-1C3RB + OP-88081 + OP-87530 + OP-99032 are required.
24
Distorted codes on curved surfaces
Codes marked on machined surfaces
Codes marked on surfaces with projections and depressions
Glare removal from metal, black resin, etc.
Polarised illumination Multi-angle lights + partial lighting
Enabled for DPM on metals including cylinders and cast surfaces
DPM ON CAST
SURFACE
CYLINDER
HAIRLINE
MULTI-LIGHTING CONTROL FUNCTION
AUTOMATIC SELECTION OF OPTIMAL LIGHTING
Automatic tuning is done just by pushing the function button and reading a code. Use the device on site without the need to carry around a PC.
BUILT-IN FUNCTION BUTTON
EASILY CUSTOMISABLE SETTINGS
• Reading rate testing• Radio wave testing
Assess stability of reading and communication
PRESS
SR-G100
Ultimate Handheld Model with innovative multi-function button
Code correction algorithms, developed for the SR-1000 Series of fixed mount code readers, have been optimised specifically for use with handheld code readers. This allows an ideal balance between reading consistency and speed.
NEW ALGORITHM FOR
HANDHELD DPM CODE READER
HolderSR-HL1
USB cableOP-51580
Setup softwareSR-H6W
SR-G100/SR-LR1for setup
Supports both flat and wall-mounted positions
* A separate AC cable is required with OP-88020 and SR-CG14 products.
AC CABLE L IST OP-99062 (UK) OP-99032 (Germany, France, Italy, Belgium) OP-99022 (USA, Canada)
OP-99042 (China) OP-99102 (Mexico) OP-99112 (Thailand) OP-99012 (Japan)
25
90º
By naturally inducing flat positioning, the SR-G100 reduces the need to worry about variations between users as well as variations in code marking styles. This makes it possible for anyone to perform stable reading.
ERGONOMIC SHAPE THAT ENCOURAGES OPTIMAL POSITIONING
CENTRE-OF-GRAVITY DESIGN
USB CONNECT ION
PC
USB keyboardUSB COM
USB
PLC
HMI [Touch panel]
PC
RS - 232C , E THERNET CONNECT ION
Handheld DPM Code Reader SR-G100
Handheld DPM Code Reader SR-G100
Communication unit (USB)SR-UB1
• 24 VDC • AC adapter (OP-88020*)
Communication unit(Ethernet & RS-232C)SR-LR1
Ethernet
PLC link, TCP/IP, FTP
RS-232C
OUT signal
Rechargeable battery packSR-B1
SR-G100 cableSR-PU1(Approx. 2.5 m)
AC adapterOP-88020*
(Approx. 1.2 m)
4-in-line charging unitSR-CG14*
(incl. OP-88020)
26
WIDE AREA
265 × 195 mm
LARGE READING DEPTH
380 mmREADING CAPABIL IT IES
Type Wireless Wired
Standard HR-100 HR-100
Hi-Resolution HR-101 HR-101
SYSTEM CONFIGURATION
*1 *2 OP-87530 and OP-99032 are changed by each country
RS-232C
RS-232C
HR-1C3RC
HR-1C3RB
HOST OPTION SETUP SOFTWARE
HR-100B/101B MODEL-SPECIFIC OPTIONS
PC
PLC
USB-HIDUSB-COM
PS/2
HR-1C3UN HR-1C3UC HR-1C5UC
HR-1C3VC
OP-87530*1 (AC adapter)
OP-99032*2 (AC cable)
OP-87530*1 (AC adapter)
OP-99032*2 (AC cable)
OP-87530*1 (AC adapter)
OP-99032*2 (AC cable)
HR-100BHR-101B
HR-100HR-101
HR-UC1
+
OP-87531 (Holder)
OP-87532 (Flexible arm stand)
HR-H1WE
HR-UC1(Communication Unit)HR-PU1(Desktop holder)
HR-B1(Battery pack)
+
+
+
HR-B1
Communication cable
Model HR-1C3UN HR-1C3UC HR-1C5UC HR-1C3RC*1 HR-1C3VC*1 HR-1C3RB*2
Appearance
Cable type Straight Curled
Cable length Approx. 3 m Approx. 5 m Approx. 3 m
Interface USB RS-232C PS/2 keyboard RS-232C
Connector USB (type A) D-sub 9-pin (female) Mini-DIN 6-pin D-sub 9-pin (female)
*1. Only for use with HR-100/101 (wired type) *2. Only for use with HR-100B/101B (wireless type)
HR-100 Series
Handheld 1D and 2D Code Reader
Thanks to a wide reading area and a large depth of field, the code area is easily captured at the push of a button. Furthermore, a high-speed reading that is faster than the conventional handheld readers is provided.
EASY CODE DETECTION INSTANT DECODINGWIDE READING AREA & FASTER READING SPEED
27
MODEL L INEUP
OP-77470 Table top stand
OP-77466 Replacement cable for keyboard interface
OP-77467 Replacement cable for USB
OP-77469 Replacement cable for RS-232C to KEYENCE
Easy to use barcode reader, with minimal setup requirements. Plug-and-play for most applications. Various communication models are available to connect with different PC or PLC systems. Easy setup codes can enable or disable different barcode types. Data output and communication settings can be changed to match existing systems.
BL-N70 Series
Laser Handheld Barcode Reader
OPTION
BL-N70VEPS/2 Keyboard Input Type
BL-N70UBEUSB Keyboard Interface Type
BL-N70RKERS-232C type for connection to DV-90 or N-L20.This runs on 5 VDC power supply on D-sub 9 connector.
SEVERAL CONNECTION TYPES DEPENDING ON APPLICATIONTransmitting bar code data is as easy as connecting the reader to a PC. There is no need for a special power supply or software.
PS2 RS-232C
Special holder for BL-N70 SeriesOP-77470
USB
28
Main unit
Model SR-1000 SR-1000W SR-1000 + SR-10AH
Type Standard type Wide-field type When the high resolution lens attachment is used
ReceiverSensor CMOS Image SensorNumber of pixels 1280 × 1024 pixels
Light emitterIllumination light source High intensity red LEDPointer light source High intensity green LED –
Focus adjustment Autofocus*
Reading specifications
Supported symbol
2D QR, MicroQR, DataMatrix (ECC200), GS1 DataMatrix, PDF417, MicroPDF417, GS1 Composite (CC-A/CC-B/CC-C)
Barcode CODE39, ITF, 2of5(Industrial 2of5), COOP 2of5, NW-7 (Codabar), CODE128, GS1-128, GS1 DataBar, CODE93, JAN/EAN/UPC, Trioptic CODE39, CODE39 Full ASCII, Pharmacode
Minimum resolution
2D 0.063 mm 0.082 mm 0.025 mmBarcode 0.082 mm 0.082 mm 0.082 mm
Reading distance 110 mm to 1000 mm 50 mm to 600 mm 20 mm to 40 mm
Field of view for reading 122 × 97 mm(Typical example at 400 mm)
257 × 206 mm(Typical example at 400 mm) 19 × 15 mm(Typical example at 40 mm)
I/O specifications
Control input
Number of inputs 2Input type Bidirectional voltage inputMaximum rating 26.4 VDCMinimum ON voltage 15 VDCMaximum OFF current 0.2 mA or less
Control output
Number of outputs 3Output type Photo MOS relay outputMaximum rating 30 VDCMaximum load current 1 output: 50 mA or less, Total of 3 outputs: 100 mA or lessLeakage current when OFF 0.1 mA or lessResidual voltage when ON 1 V or less
EthernetCommunication standard IEEE 802.3 compliant, 10BASE-T/100BASE-TXSupported protocol TCP/IP, SNTP, FTP, BOOTP, MC Protocol, Omron PLC link, KV STUDIO, EtherNet/IPTM, PROFINET
Serial communication
Communication standard RS-232C compliantTransmission speed 9600, 19200, 38400, 57600, 115200 bpsSupported protocol No-protocol, MC Protocol, SYSWAY, KV STUDIO
USB Communication standard USB 2.0 Full Speed compliant
Environmental resistance
Enclosure rating IP65Ambient temperature 0 to +45°CAmbient storage temperature −10 to +50°C Relative humidity 35 to 85% RH (No condensation)Storage ambient humidity 35 to 85% RH (No condensation)Ambient luminance Sunlight: 10000 lux, Incandescent lamp: 6000 lux, Fluorescent lamp: 2000 luxOperating environment No dust or corrosive gas presentVibration 10 to 55 Hz Double amplitude 0.75 mm, 3 hours each in X, Y and Z directions
RatingPower voltage 24 VDC ±10%Current consumption Approx. 700 mA
Weight Approx. 200 g Approx. 250 g* The focal position can be adjusted automatically during installation.• SR-1000N and SR-1000WN are available as supported models for India.
D IMENS IONSUnit: mm
Adjustable bracket OP-87866
Main unit SR-1000/1000W
ø5.3
4 × M4Depth: 5
152
180
120123
33
7.5
28
28
(5)
47
2
5250.5
120
123
20.5
38.5 2.6
47.6
18.9
28
74
17
47
28 10°10°
R32
5.3
13
4723.5
20.5
Centre of scanner
ø5.3
4 × M4Depth: 5
152
180
120123
33
7.5
28
28
(5)
47
2
5250.5
120
123
20.5
38.5 2.6
47.6
18.9
28
74
17
47
28 10°10°
R32
5.3
13
4723.5
20.5
Centre of scanner
SPEC I F ICAT IONS
High resolution attachment SR-10AH
Reflector attachment SR-10AR
Adjustable bracket OP-88002
*A ø12 mm support is required.
4261.6
47
31.6
49.255.6
19
55
5458.4
19
30
67.180.6
31
2638.5
98°
113.5
Autofocus 1D and 2D Code Reader SR-1000 Series
29
Unit: mm
Unit: mm
Unit: mm
Distance 2D Barcode
20 0.025
0.08220 to 30 0.03
20 to 40 0.04
Image capture range (1280 × 1024 pixels)
Image capture range (800 × 600 pixels)
Distance Width Height Width Height
20 11 9 7 5
30 15 12 9 7
40 19 15 11 8
Mounting distance
20 911
1915
40
SR-1000 + SR-10AH
MINIMUM RESOLUTION FIELD OF VIEW
Mounting distance
110 2430
312250
1000
SR-1000
SR-1000W
FIELD OF VIEW
Unit: mm
Unit: mm
Distance 2D Barcode
110 0.063
0.082110 to 140 0.082
110 to 230 0.14
110 to 300 0.18 0.11
110 to 400 0.24 0.15
110 to 600 0.37 0.22
110 to 1000 0.61 0.37
Distance 2D Barcode
50 0.0820.082
50 to 100 0.14
50 to 150 0.20 0.12
50 to 230 0.30 0.18
50 to 300 0.38 0.23
50 to 400 0.51 0.31
50 to 600 0.76 0.45
Image capture range (1280 × 1024 pixels)
Image capture range (800 × 600 pixels)
Distance Width Height Width Height
110 30 24 19 14
140 40 32 25 18
230 68 54 42 32
300 90 72 56 42
400 122 97 76 57
600 185 148 116 87
1000 312 250 195 146
Image capture range (1280 × 1024 pixels)
Image capture range (800 × 600 pixels)
Distance Width Height Width Height
50 35 28 22 16
100 67 54 42 31
150 99 79 62 46
230 150 120 93 70
300 194 155 121 91
400 257 206 161 120
600 384 307 240 180
Mounting distance
50 2835
384307
600
MINIMUM RESOLUTIONUnit: mm
FIELD OF VIEW Unit: mm
Unit: mmMINIMUM RESOLUTION
Unit: mm
R EAD ING RANGE CHARACTER I S T ICS [ T Y P ICA L ]
30
Model SR-750HA SR-750 SR-751 SR-752 SR-752 + SR-75L4 SR-752 + SR-75L6Type High-resolution type Close-range type Middle-range type Long-range type With 400 mm lens With 600 mm lens
ReceiverSensor CMOS Image SensorNumber of pixels 752 × 480 pixels
Lighting Light source Red LED
Laser pointer
Light source Visible semiconductor laser, Wavelength 660 nmOutput 60 μWPulse duration 200 μsLaser class Class 1 Laser Product (IEC60825-1, FDA (CDRH) Part 1040.10*2)
Reading specifications
Supported symbol
2D QR, MicroQR, DataMatrix (ECC200), GS1 DataMatrix, PDF417, MicroPDF417, GS1 Composite (CC-A/CC-B/CC-C)
Barcode *1 CODE39, ITF, 2of5(Industrial 2of5), COOP 2of5, NW-7 (Codabar), CODE128, GS1-128,GS1 DataBar, CODE93, JAN/EAN/UPC, Trioptic CODE39, CODE39 Full ASCII
Minimum resolution
2D 0.082 mm 0.127 mm 0.19 mm 0.19 mm 0.33 mm 0.5 mmBarcode – 0.127 mm 0.127 mm 0.17 mm 0.22 mm 0.33 mm
Reading distance(typical examples)
DataMatrixQR
22 to 50 mm(Cell size = 0.25 mm)
40 to 80 mm(Cell size = 0.25 mm)
45 to 165 mm(Cell size = 0.5 mm)
180 to 305 mm(Cell size = 0.5 mm)
300 to 490 mm (Cell size = 0.5 mm)
460 to 690 mm(Cell size = 0.5 mm)
Barcode –30 to 100 mm
(Narrow bar width= 0.33 mm)
45 to 195 mm(Narrow bar width
= 0.5 mm)
180 to 330 mm(Narrow bar width
= 0.5 mm)
250 to 540 mm(Narrow bar width
= 0.5 mm)
400 to 760 mm(Narrow bar width
= 0.5 mm)
Focal distance 38 mm 60 mm 100 mm 250 mm 400 mm 600 mmField of view (at focal distance) 26 × 17 mm 42 × 27 mm 70 × 45 mm 65 × 41 mm 108 × 69 mm 165 × 106 mm
I/O specifications
Control input
Number of inputs 2Input type Bidirectional voltage inputMaximum rating 26.4 VDCMinimum ON voltage 15 VDCMaximum OFF current 0.2 mA or less
Control output
Number of outputs 3Output type Photo MOS relay outputMaximum rating 30 VDCMaximum load current 1 output: 50 mA or less, Total of 3 outputs: 100 mA or lessLeakage current when OFF 0.1 mA or lessResidual voltage when ON 1 V or less
EthernetCommunication standard 10BASE-T/100BASE-TXSupported protocol TCP/IP, FTP, SNTP, BOOTP, EtherNet/IPTM, PROFINET, MC protocol, KV STUDIO
Serial communication
Communication standard RS-232C compliant Transmission speed 9600, 19200, 38400, 57600, 115200 bpsSupported protocol No-protocol, MC protocol, SYSWAY, KV STUDIO
Environmental resistance
Enclosure rating IP65Ambient temperature 0 to 45°CAmbient storage temperature -10 to +50°CRelative humidity 35 to 95% RH (No condensation)Storage ambient humidity 35 to 95% RH (No condensation)Ambient luminance Sunlight: 10000 lux, Incandescent lamp: 6000 lux, Fluorescent lamp: 2000 luxOperating environment No dust or corrosive gas presentVibration 10 to 55 Hz Double amplitude 1.5 mm/55 to 500 Hz: Acceleration 5G, 3 hours each in X, Y and Z directions
RatingPower voltage*3 Control port: 24 VDC ±10% or Ethernet port: PoE TypeA/B 36 to 57 V (Cannot supply at the same time)Current consumption Control port: 220 mA (When 24 VDC power supply is used) Ethernet port: PoE Power Class 2*4
Weight Approx. 160 g Approx. 175 g Approx. 185 g*1 Barcodes fitted into the visual field range in size can be read.*2 The laser classification for FDA (CDRH) is implemented based on IEC60825-1 in accordance with the requirements of Laser Notice No.50.*3 To comply with CSA No.61010-1/UL61010-1/IEC61010-1, use a power supply:
- one that provides Class 2 output as defined in the CEC and NEC, or- one that has been evaluated as a Limited Power Source as defined in CAN/CSA-C22.2 No.60950-1/UL60950-1/IEC60950-1.
*4 Peak operating current for PoE Power Class 2: 210 mA maximum.• PROFINET is a trademark or registered trademark of PROFIBUS International.• EtherNet/IPTM is a trademark or registered trademark of ODVA.
SPEC I F ICAT IONS
PoE & Compact 1D and 2D Code Reader SR-750 Series
Main unit
31
37.5
17.6
30.834.3
1.2
13.2
65
15° 15°
46.4
65
17.6
42.139.1
1.2
11.1
49.2
11.1
15°
42.742.1
54.6 16.2
33.9
31.1
70.5
(114) (110)
(142)(145)
(52.5)
(51)(5.5)(2.5)
(10.5)
(7.5)
47
7.5
10° 10°
20
33
2
Insulatingsheet
5.3
R32
ø5.3
2-M4
Dimension forthe screw holes.
SR-750/751/750HA SR-752 With cable
Mounting bracket
Main unit
Long-focal distance lens SR-75L4/75L6
D IMENS IONS
Unit: mm
100 75 50 25 -25 -50 -75 -1000
R EAD ING RANGE CHARACTER I S T ICS [ T Y P ICA L ]
SR-750HA: High-resolution type
SR-751: Middle-range type
SR-750: Close-range type
SR-752: Long-range type
40
100
50
0
B
A
30 20 10 -10 -20 -30 -400Readingdistance
Unit: mm
Focal distance60 mm
20
60
40
20
B
A
0
15 10 5 -5 -10 -15 -200
Reading distance
Unit: mm
Focal distance38 mm
Code type Cell size A B
DataMatrixQR
0.08 31 390.127 27 420.25 22 50
Code type Cell size Narrow bar width A B
DataMatrixQR
0.127 50 700.25 40 80
Code390.127 46 740.33 30 100
Code128 0.25 34 90
Code type Cell size Narrow bar width A B
DataMatrixQR
0.25 65 1300.5 45 165
Code390.127 75 1100.5 45 195
Code128 0.25 50 150
Code type Cell size Narrow bar width A B
DataMatrixQR
0.19 220 2600.25 210 2700.33 200 2800.5 180 305
Code390.17 220 2600.5 180 330
Code128 0.25 195 275
80
200
150
100
50
B
A
0
60 40 20 -20 -40 -60 -800Reading distance
Unit: mm
Focal distance100 mm
300
250
200
150
B
A
0
Reading distance
Unit: mm
Focal distance250 mm
40 30 20 10 -10 -20 -30 -400
SR-752 + SR-75L4 (400 mm lens)
Code type Cell size Narrow bar width A B
DataMatrixQR
0.33 350 4500.5 300 490
Code390.22 370 4400.5 250 540
Code128 0.25 350 450
600
500
400
300
B
A
0
Reading distance
Unit: mm
Focal distance400 mm200
SR-752 + SR-75L6 (600 mm lens)
Code type Cell size Narrow bar width A B
DataMatrixQR
0.5 460 6901 330 860
Code390.33 500 6900.5 400 760
Code128 0.33 500 690
800
600
400
200
B
A
0
Reading distance
Unit: mm
Focal distance600 mm
100 50 -50 -150-1000150
(46.5)
M12 ø15
OP-87362Ethernet plug assembly
Unit: mm Unit: mm
Unit: mm
Unit: mm
Unit: mm
Unit: mm
32
Model SR-700HA SR-700 SR-710Type High-resolution type Close-range type Middle-range type
Laser pointer
Light source Visible semiconductor laser (Wavelength: 660 nm)Output 60 μWPulse duration 200 µsLaser class Class 1 Laser Product (IEC60825-1, FDA (CDRH) Part 1040.10*1)
Lighting Light source High intensity red LED
Reading
Supported code
Barcode *2 CODE39, ITF, 2of5 (Industrial 2of5), COOP 2of5, NW-7 (Codabar), CODE128, GS1-128, GS1 DataBar, CODE93, JAN/EAN/UPC, Trioptic CODE39, CODE39 Full ASCII, Pharmacode
2D code QR, MicroQR, DataMatrix (ECC200), GS1 DataMatrix, PDF417, MicroPDF417, GS1 Composite (CC-A, CC-B, CC-C)Minimum resolution
Barcode − 0.127 mm 0.127 mm2D code 0.082 mm 0.127 mm 0.19 mm
Reading distance(typical examples)
Barcode − 30 to 100 mm(Narrow bar width = 0.33 mm)
45 to 195 mm(Narrow bar width = 0.5 mm)
2D code 22 to 50 mm(Cell size = 0.25 mm)
40 to 80 mm(Cell size = 0.25 mm)
45 to 165 mm(Cell size = 0.5 mm)
Focal distance 38 mm 60 mm 100 mmField of view (Typical example at focal distance) 26 mm × 17 mm 42 mm × 27 mm 70 mm × 45 mm
I/O
Control input 2 inputs (IN1 and IN2), non-voltage input (contact, solid-state)
Control output4 NPN open collector outputs (OUT1 to 4)
30 mA or less (24 V or less)Residual voltage 0.8 V or less, leakage current 0.1 mA or less
RS-232CTransmission speed 9600, 19200, 38400, 57600, 115200 bpsSupported protocol No-protocol, MC protocol, SYSWAY, KV STUDIO
USB USB 2.0 Full Speed compliant
Environmental resistance
Enclosure rating IP65Ambient temperature 0 to +45°CAmbient storage temperature -10 to +50°C(No freezing)Relative humidity 35 to 95% RH (No condensation)Ambient luminance Sunlight: 10000 lux, Incandescent lamp: 6000 lux, Fluorescent lamp: 2000 luxOperating environment No dust or corrosive gas presentVibration 10 to 55 Hz Double amplitude 1.5 mm, 3 hours each in X, Y and Z directions
RatingPower voltage 5 VDC +5%, -10%Current consumption 630 mA or less
Weight Approx. 160 g (including cable)
*1 The laser classification for FDA (CDRH) is implemented based on IEC60825-1 in accordance with the requirements of Laser Notice No.50.*2 Barcodes fitted into the visual field range in size can be read.
D IMENS IONS
Unit: mm
ø5
Centre of scanner
11
13.2
18.5
40
24
3.8
2-M3Depth 4 mm
9.3
3.5
32
33
3.5 24.3
(27.8)
(36.5)
Thickness 13
Cord length 200
Cord length 130
Cord length 1800
53
21
USB for setting, Type A male (for PC connection)
2-(R2.65)
40°
ø5.3
R18R1.5 C17
18.5
5.3
27.5
18
2-M440°
Dimensions of the screw holes
90° ±
1.5°
66
1.5
0.7
2-R1.5
60.8
4-3.3
32
3.5
33
0.70.724.33.5
8-(R1.65)
ø5
Centre of scanner
11
13.2
18.5
40
24
3.8
2-M3Depth 4 mm
9.3
3.5
32
33
3.5 24.3
(27.8)
(36.5)
Thickness 13
Cord length 200
Cord length 130
Cord length 1800
53
21
USB for setting, Type A male (for PC connection)
2-(R2.65)
40°
ø5.3
R18R1.5 C17
18.5
5.3
27.5
18
2-M440°
Dimensions of the screw holes
90° ±
1.5°
66
1.5
0.7
2-R1.5
60.8
4-3.3
32
3.5
33
0.70.724.33.5
8-(R1.65)
ø5
Centre of scanner
11
13.2
18.5
40
24
3.8
2-M3Depth 4 mm
9.3
3.5
32
33
3.5 24.3
(27.8)
(36.5)
Thickness 13
Cord length 200
Cord length 130
Cord length 1800
53
21
USB for setting, Type A male (for PC connection)
2-(R2.65)
40°
ø5.3
R18R1.5 C17
18.5
5.3
27.5
18
2-M440°
Dimensions of the screw holes
90° ±
1.5°
66
1.5
0.7
2-R1.5
60.8
4-3.3
32
3.5
33
0.70.724.33.5
8-(R1.65)MAIN UNIT MOUNTING BRACKET HEAD CABLE
SR-700/710/700HA
SPEC I F ICAT IONS
Main unit
Ultra Compact 1D and 2D Code Reader SR-700 Series
33
R EAD ING RANGE CHARACTER I S T ICS [ T Y P ICA L ]
Code typeCell size
Narrow bar widthA B
2D0.127 50 70
0.25 40 80
Barcode0.127 46 74
0.33 30 100
SR-700
Code type Cell sizeNarrow bar width A B
2D0.25 65 130
0.5 45 165
Barcode0.127 75 110
0.5 45 195
SR-710
40
100
50
0
B
A
30 20 10 -10 -20 -30 -400Reading distance
Unit: mm
Focal distance60 mm
80
200
150
100
50
B
A
0
60 40 20 -20 -40 -60 -800Reading distance
Unit: mm
Focal distance100 mm
Code type Cell size A B
2D
0.08 31 39
0.127 27 42
0.25 22 50
SR-700HA Reading distance
Unit: mm
20
50
40
20
B
A
0
15 10 5 -5 -10 -15 -200
Focal distance38 mm
Unit: mm
Unit: mm
Unit: mm
34
Model BL-1300 BL-1301 BL-1300HA BL-1301HAType Standard High-resolutionRead direction FrontLight source Visible-light semiconductor laser (660 nm wavelength)
Output 85 μWPulse duration 112 μsLaser class Class 2 Laser Product (IEC60825-1, FDA (CDRH) Part1040.10*1)
Scanning method Single Raster Single RasterFocal distance 120 mm 90 mmReading distance 65 to 500 mm *2 (1.0 mm narrow bar width) 45 to 270 mm *2 (0.5 mm narrow bar width)Readable bar width 0.125 mm 0.08 mmLargest readable label width 339 mm*2 (350 mm distance, 1.0 mm narrow bar width) 189 mm*2 (189 mm distance, 0.5 mm narrow bar width)PCS 0.4 or moreScanning rate 500 to 1300 scans/second
Supported barcodes CODE39, ITF, 2of5(Industrial 2of5), COOP2of5, NW-7(Codabar), CODE128, GS1-128, CODE93, JAN/EAN/UPC, GS1 DataBar
Number of readable digits 74 digits (148 digits with CODE128 start character C)
Environmentalresistance
Enclosure rating IP65Operating ambient illumination Sunlight: 10000 lux, Incandescent lamp: 6000 luxOperating ambient temperature 0 to 45˚CStorage ambient temperature -20 to +60˚COperating ambient humidity 35 to 85% RH, No condensationOperating environment No dust or corrosive gasVibration resistance 10 to 55 Hz, 1.5 mm double amplitude in X, Y, and Z directions, 2 hours respectively
Rated valuesPower supply 5 VDC ±5%Current consumption 400 mA max.
Weight Approx. 115 g
Model BL-1350HA BL-1351HA BL-1370 BL-1371Type High-resolution side Long-distanceRead direction Side FrontLight source Visible-light semiconductor laser (660 nm wavelength)
Output 85 μWPulse duration 112 μsLaser class Class 2 Laser Product (IEC60825-1, FDA (CDRH) Part1040.10*1)
Scanning method Single Raster Single RasterFocal distance 65 mm 230 mmReading distance 40 to 250 mm*2 (0.5 mm narrow bar width) 160 to 600 mm*2 (1.0 mm narrow bar width)Readable bar width From 0.08 mm From 0.15 mmLargest readable label width 201 mm*2 (175 mm distance, 0.5 mm narrow bar width) 404 mm*2 (420 mm distance, 1.0 mm narrow bar width)PCS 0.4 or moreScanning rate 500 to 1300 scans/second
Supported barcodes CODE39, ITF, 2of5(Industrial 2of5), COOP2of5, NW-7(Codabar), CODE128, GS1-128, CODE93, JAN/EAN/UPC, GS1 DataBar
Number of readable digits 74 digits (148 digits with CODE128 start character C)
Environmentalresistance
Enclosure rating IP65Operating ambient illumination Sunlight: 10000 lux, Incandescent lamp: 6000 luxOperating ambient temperature 0 to 45˚CStorage ambient temperature -20 to +60˚COperating ambient humidity 35 to 85% RH, No condensationOperating environment No dust or corrosive gasVibration resistance 10 to 55 Hz, 1.5 mm double amplitude in X, Y, and Z directions, 2 hours respectively
Rated valuesPower supply 5 VDC ±5%Current consumption 400 mA max.
Weight Approx. 130 g Approx. 115 g
*1 The laser classification for FDA (CDRH) is implemented based on IEC60825-1 in accordance with the requirements of Laser Notice No.50.*2 Specifications for 500-scan/second operation • Use the Limited Power Source defined in UL/IEC60950-1 to comply with UL/IEC60950-1. • Internal body settings are written in the internal memory area (can be rewritten 100000 times).
SPEC I F ICAT IONS
Ultra-Compact Digital Barcode Reader BL-1300 Series
Main unit
Input terminals 2 inputs (IN1, IN2), non-voltage input (contact or solid-state)
Outputterminals
Output format 4 (OUT1 through OUT4), NPN open collectorRated load 24 VDC, 30 mAOFF leak current 0.1 mA max.ON residual voltage 0.5 V max.
Serial interface
Communication standard Conforms to EIA, RS-232CBaud rates 600/1200/2400/4800/9600/19200/31250/38400/57600/115200 bpsSynchronisation method Start/stop synchronisationData bit length 7/8 bitsStop bit length 1/2 bitsParity check None/Even/Odd
I/O specifications
35
BL-1300/1301/1300HA/1301HA/1370/1371 (front type)
BL-1300/1301 (standard type) BL-1370/1371 (long-distance type)
BL-1300HA/1301HA (high-resolution front type) BL-1350HA/1351HA (high-resolution side type)
Barcode type
ABC
ED
CODE39CODE39CODE39
CODE39CODE39
0.080.1250.19
0.50.25
65 to 8060 to 14050 to 190
45 to 27045 to 210
55 to 9055 to 140
55 to 26055 to 170
Narrow bar width Read distance (500 scans)
Read distance (1300 scans) Barcode type
ABC
ED
CODE39CODE39CODE39
CODE39CODE39
0.080.1250.19
0.50.25
45 to 6040 to 12040 to 170
40 to 25040 to 190
45 to 7545 to 120
45 to 24045 to 150
Narrow bar widthRead distance
(500 scans)Read distance (1300 scans)
Barcode type
ABC
ED
CODE39CODE39CODE39
CODE39CODE39
0.1250.190.25
1.00.5
85 to 14080 to 22065 to 280
65 to 50065 to 400
80 to 15060 to 200
60 to 45060 to 360
Narrow bar widthRead distance
(500 scans)Read distance (1300 scans) Barcode type
ABC
ED
CODE39CODE39CODE39
CODE39CODE39
0.150.190.25
1.00.5
205 to 250190 to 330180 to 380
160 to 600170 to 500
190 to 230
160 to 500160 to 400
Narrow bar widthRead distance
(500 scans)Read distance (1300 scans)
Measurement conditions: Standard KEYENCE barcode (narrow/wide bar ratio of 1:2.5); Mounting conditions: 15° skew, 0° pitch, 0° tilt
Measurement conditions: Standard KEYENCE barcode (narrow/wide bar ratio of 1:2.5); Mounting conditions: 15° skew, 0° pitch, 0° tilt
Measurement conditions: Standard KEYENCE barcode (narrow/wide bar ratio of 1:2.5); Mounting conditions: 15° skew, 0° pitch, 0° tilt
Measurement conditions: Standard KEYENCE barcode (narrow/wide bar ratio of 1:2.5); Mounting conditions: 15° skew, 0° pitch, 0° tilt
Foca
l dis
tanc
e
65 m
m
96201
72
050 50100 100
A
BC
DE
Foca
l dis
tanc
e
65 m
m
96194
72
050 50100 100
BC
DE
100
5015
00
200
250
500 scans 1300 scans
Foca
l dis
tanc
e23
0 m
m
404227
0100 100200 200
AB
CD
E
Foca
l dis
tanc
e23
0 m
m
339227180
0100 100200 200
CD
E
200
100
300
040
050
060
0
Foca
l dist
ance
120
mm
339124
500 scans
0100 100200 200
AB
CD
E
Foca
l dist
ance
120
mm
306124
1300 scans
0100 100200 200
020
010
030
040
050
0
BC
DE
500 scans 1300 scans
Foca
l dis
tanc
e90
mm
96189
68
050 50100 100
AB
CD
E
Foca
l dis
tanc
e
90 m
m
96182
68
050 50100 100
BC
DE
100
5015
00
200
250
500 scans 1300 scans
R EAD ING D I S TANCES
29.8
16.0
Laser beam29.3
31
22.53.5
3.5
11.5 14.6
33
2 - M3 depth 4
15 (min.)
ø 4.2Cord length: 2 m
3.8
40
21
23.5
Scan centre
2-R 2.65
2-R 2.65
6.53
6
3
5.3
5.3
4026.5
59.6
2.219.6
32.7
11.4
28.02.2
43.6
49.4
15°
Laser beam
7.8
R195.5
14 9
43.4 38.7
2-R 2.752-R 2.75
37.625
5.53
15°
5° 10°
Laser beam
19
26.5
2-M4
2-M4
10°5°
Mounting A (front type) Mounting B (front type)
D IMENS IONS
Unit: mm
Unit: mm
36
Model BL-700 BL-701 BL-740 BL-741 BL-780 BL-781Type High-resolution Middle-range Long-rangeScanning method *1 Single Raster Single Raster Single RasterLight source Visible semiconductor laser (Wavelength: 655 nm)
Output 100 μWPulse duration 50 μs (FDA (CDRH) Part1040.10), 99.5 μs (IEC60825-1)Laser class Class II Laser Product (FDA (CDRH) Part1040.10), Class 2 Laser Product (IEC6085-1)
Reading distance 160 to 370 mm(When narrow bar width is 0.5 mm)
150 to 750 mm(When narrow bar width is 1.0 mm)
200 to 1200 mm(When narrow bar width is 2.0 mm)
Reading bar width *2 0.15 to 1.0 mm 0.25 to 2.0 mm 0.32 to 2.0 mm
Largest readable label width *3 310 mm(When reading distance is 335 mm)
600 mm(When reading distance is 680 mm)
1010 mm(When reading distance is 1080 mm)
PCS 0.6 or more (Reflectance of white part: 75% or more)Scanning rate 700 scans/secTarget code CODE39, ITF, 2of5(Industrial 2of5), COOP2of5, NW-7(Codabar), CODE128, GS1-128, CODE93, JAN/EAN/UPCNumber of readable digits 32 digits max. *4
Trigger input Non-voltage input (contact, solid-state), TTL input is also possible.
Serialinterface
Applied standard RS-232CSynchronisation Start-stopTransmission code ASCIIBaud rate 600/1200/2400/4800/9600/19200/31250/38400 bpsData length 7/8 bitsParity check None/Even/OddStop bit length 1 bit/2 bits
OK/NGoutput
Output form NPNRated load 24 VDC, 30 mALeakage current (at OFF) 0.1 mA max.Residual voltage (at ON) 0.5 V max.
Environmentalresistance
Enclosure rating IP65
Ambient light Sunlight: 10000 lux, Incandescent lamp: 6000 lux
Sunlight: 10000 lux, Incandescent lamp: 4000 lux
Sunlight: 8000 lux , Incandescent lamp: 3000 lux
Ambient temperature 0 to 40°C, No condensation Relative humidity 35 to 85%, No condensationOperating atmosphere No dust or corrosive gas presentVibration 10 to 55 Hz, 1.5 mm double amplitude in X, Y, and Z directions, 2 hours respectively
Power ratingPower supply voltage 5 VDC ±5%Current consumption 510 mA max.
Weight Approx. 300 g (including cable)
*1 BL-701 raster width: 10 ±1 mm (reading distance: 200 mm) BL-741 raster width: 20 ±2 mm (reading distance: 300 mm) BL-781 raster width: 30 ±3 mm (reading distance: 450 mm)
*2 When the barcode type is CODE39.*3 Largest reading label width includes the barcode margin (quiet zone).*4 When start/stop character of CODE128 is CODE-C, up to 64 digits are allowed.• The internal BL settings are written to the built-in EEPROM (erasable up to 100000 times).
SPEC I F ICAT IONS
BL-1350HA/1351HA (side type)
18.7 17.6
15°Laser beam
41.6
22 3.5
3.5
38.1
48
2 - M3depth 4
11.5
21
3.815 (min.)
48
6.5
ø 4.2Cord length: 2 m
23.5
Scan centre
365.55.3
5.3
18.7
15°
Laser beam
21 1.6
3
3
1138.5
21
41.6
67.6
48
19.62.2
2-R 2.652-R 2.65
362-M4
Mounting (side type)
D IMENS IONS
Unit: mm
Long Distance Laser Barcode Reader BL-700 Series
Main unit
37
D IMENS IONS
Unit: mm
Unit: mm
400500600 300 200 100 0 100 200 300 400 500 600
Readable label width
BCD
320
480
580
870
1100
1200
200
A
1010900700435465400
400 300 200 100 0 100 200 300 400Readable label width
B A ECD
230
440490
330360
550
750
650
150
600510430350330348300
400
(Foc
al di
stan
ce)
200 100 0 100 200
Readable label width
BECD
370
300275
320325
310275270254210215185
A
230
(Foc
al di
stan
ce)
205190185175160
(Measuring conditions)• The KEYENCE standard barcode is used.• Skew: 0°• Pitch: 0°• Tilt: 0°• Ratio 1:2.5• Including the margins
(Measuring conditions)• The KEYENCE standard barcode is used.• Skew: 0°• Pitch: 0°• Tilt: 0°• Ratio 1:2.5• Including the margins
(Measuring conditions)• The KEYENCE standard barcode is used.• Skew: 0°• Pitch: 0°• Tilt: 0°• Ratio 1:2.5• Including the margins
ABCDE
Narrow bar width0.15 mm0.19 mm0.25 mm0.5 mm1 (EAN)
ABCD
Narrow bar width0.32 mm0.5 mm1.0 mm2.0 mm
ABCDE
Narrow bar width0.25 mm0.32 mm0.5 mm1 mm
1 (EAN)
500
(F
ocal
dist
ance
)
* The laser beam radiates at 10 ±0.5° perpendicular to side (A).
9.9
53
(A)
Laser beam
( )
10°
26.5
58 51.5
3.2546.53.25
28.5
Laser transmitter
2 - ø3.5mounting hole
ø5.8Cable length 1.8 m
36
*
BL-700 Series
BL-700/701 BL-740/741 BL-780/781
R EAD ING D I S TANCES
38
* The laser beam radiates at 10 ±0.5° perpendicular to side (A).
9.9
53
(A)
Laser beam
( )
10°
26.5
58 51.5
3.2546.53.25
28.5
Laser transmitter
2 - ø3.5mounting hole
36
15
2 × 2-M3Depth 5 mm or less
55 20
55
36
15 36
6
4
6
4
ø10537
33Receiver axis 1012.5
26
2 × 2-M3Depth 5 mm or less
47 20
55
17
26 17
10
4
10
ø10
4
5
29 33
Receiver axis
10
15.3
80
(Rea
dabl
e la
bel w
idth
)
*
80
(Rea
dabl
e la
bel w
idth
)
Front-view type Side view type
ø5.8Cable length 1.8 m
ø4.5Cable length1.8 m
ø4.5Cable length1.8 m
Model BL-180 BL-185Model (with connector) BL-180SO (7030) BL-185SO (7031)Reading direction Front SideLight source/Light receiving element LED/CCD image sensorScanning distance 33 ±10 mm *1 (Using narrow bars of at least 0.19 mm in width)Readable bar width *2 0.125 to 1.0 mmLargest readable label width 80 mm *3 (Using narrow bars of at least 0.19 mm in width)PCS 0.45 or more (Reflectance of white part: 75% or more)Scanning rate 500 scans/secTarget code CODE39, ITF, 2of5(Industrial 2of5), COOP2of5, NW-7(Codabar), CODE128, JAN/EAN/UPCNumber of readable digits 32 digitsTrigger input Non-voltage input (contact or solid-state), TTL input is also possible.
Serialinterface
Applied standard RS-232CSynchronisation Start-stopTransmission code ASCIIBaud rate 600/1200/2400/4800/9600/19200/31250/38400 bpsData length 7/8 bitsParity check None/Even/OddStop bit length 1 bit/2 bits
OK/NGoutput
Output form NPNRated load 24 VDC, 100 mALeakage current (at OFF) 0.1 mA max.Residual voltage (at ON) 0.5 V max.
Environmentalresistance
Ambient light Sunlight, Incandescent lamp: 10000 lux, Fluorescent lamp: 3000 lux.Ambient temperature 0 to 40°C, No condensationRelative humidity 35 to 85%, No condensationOperating atmosphere No dust or corrosive gas presentVibration 10 to 55 Hz, 1.5 mm double amplitude in X, Y, and Z directions, 2 hours respectively
Power ratingPower supply voltage 5 VDC ±5% *4
Current consumption 300 mA max. Weight Approx. 165 g Approx. 180 g
*1 33 ±5 mm when the narrowest bar is less than 0.19 mm.*2 Readable bar width indicates the range of the narrowest readable bar.*3 60 mm when the narrowest bar is less than 0.19 mm.*4 Use a stable power supply of 5 VDC ±5%. The BL-U2 special power unit is available as an option.•The internal BL settings are written to the built-in EEPROM (erasable up to 100000 times).
D IMENS IONS
Unit: mm
Read
able
labe
l wid
th
60
10
OK/NG
BL-180 STABILITY
80
A
B
10
Reading distance3355
(Measuring conditions)• The KEYENCE standard barcode is used.• Skew: -10°• Pitch: 0°• Tilt: 0°
AB
Narrow bar widthLess than 0.19
0.19 Min.
BL-180/185BL-180 Series
SPEC I F ICAT IONS
READ ING D I S TANCES
CCD Barcode Reader BL-180 Series
Main unit
135
85
134.8
52.3
95.5
5.9
5.9
116.8145.5
26
84.8
6
(64.2)
1.6 to 4.0
+10
+10
Panel thickness:4-ø3.4 d = 6(for M4 tapping screw)
21.8
26
26
26.8
60
90100112
40
SD RD RS CS
POWER TIMING SD RD
RS-232C
RS-232C
RS-485
TERMINATOR
ONOFF
4 × ø5mounting hole
51
27.3
35.4
60
90100112
40
SD RD RS CS
POWER TIMING SD RD
RS-232C
RS-232C
RS-485
TERMINATOR
ONOFF
4 × ø5mounting hole
51
27.3
35.4
39
DIMENSIONS
DIMENSIONSSPEC I F ICAT IONS
Unit: mm
Unit: mm
Model DV-90NE (NPN output), DV-90PE (PNP output) Applicable barcode reader SR-1000/750/700/G100*1, BL-1300/700/600/180/N70RKE, HR-100*2
Registered preset data number 900 max.Memory backup Flash ROM (Rewritable: 100000 times)
I/O terminal
Input (4 points)• Trigger input (2 points)• Unlock input• Remote input
Rated input voltage 10 to 26 VDC, 10 mA, Class 2
Maximum OFF current 1.0 mA
Output (16 points)• Out 1 through 12• OK output• NG output• Read error output• Quality error output
Output form DV-90NE: NPN Open-collectorDV-90PE: PNP Open-collector
Rated load 30 VDC, 100 mALeakage current at OFF 0.1 mA max.Residual voltage at ON Less than 1 V
Serial interface
PORT1(For connecting code reader)
PORT2(For connecting PC, PLC, or code reader)
Applied standards RS-232CSynchronisation AsynchronousBaud rate 600 to 115200 bpsData length 7/8 bitsParity check None/Even/OddStop bit length 1 bit/2 bits
USB (Special for connecting PC) USB 2.0 (B type) (Communication speed fixed to 115200 bps)
Power outputPower for barcode reader 5 VDC ±5%, 1100 mA max. (at the ambient temperature of 0 to 40°C)
850 mA max. (at the ambient temperature of 40 to 50°C)Power for sensor 24 VDC ±10%, 250 mA max.
Environmental resistance
Enclosure rating IP65 (only the front panel when panel-mounted)Ambient temperature 0 to 50°C, No condensationRelative humidity 35 to 85%, No condensationOperating atmosphere No dust or no corrosive gas present
Power ratingPower supply voltage 24 VDC ±10%, Class 2Current consumption 850 mA max.
Weight Approx. 360 g
*1 To connect the SR-1000/750, the OP-87533 and the OP-87527/87528/87529 are required. To connect the SR-G100, SR-LR1,OP-27937 are required*2 To connect the HR-100, the HR-1C3RC/OP-87533 are required. To connect the HR-100B, HR-UC1/HR-1C3RB/OP-88046/OP-99012/OP-88081 are required
Model N-410KConnectable code reader SR-700, BL-1300/700/600/180 SeriesTriggerinput
Rated input 15 to 26.4 VDC, 10 mA max.Max. OFF current 1.0 mA
RS-232C
Applied standards RS-232CSynchronisation Start-stop (Full-duplex)Transmission code ASCIIBaud rate 9600/19200/38400/57600/115200 bpsData length 7/8 bitsParity check Even/Odd/NoneStop bit length 1 bit/2 bits
RS-485
Applied standards RS-485Synchronisation Start-stop (Full-duplex)Transmission code ASCIIBaud rate 600 to 115200 bpsData length 7/8 bitsParity check Even/Odd/NoneStop bit length 1 bit/2 bitsMax. number of connectable units 31
Max. total extension distance 1.2 km
Environmentalresistance
Ambient temperature 0 to 55°C, No condensationRelative humidity 35 to 85%, No condensation
Powerrating
Power supply voltage 24 VDC (+10%, -20%)Current consumption 80 mA max.
Weight Approx. 180 g
SPEC I F ICAT IONS
AutoID Data Controller DV-90 Series
Multi-Drop Controller N-410 Series
Main unit
Main unit
40
Model BL-U2 N-42 N-48Conversion interface — RS-232C RS-422A (Level conversion) RS-232C RS-485 (Level conversion)Connectable barcode reader BL-700/600/180 Series BL-1300/700/600/180 Series, SR-700 Series*Power supply for barcode reader 5 VDC ±5% (630 mA)
Trigger inputInput rating 8.5 to 26 VDC, 10 mA max. 15 to 26 VDC, 10 mA max.Max. OFF current 1.0 mA
Interface Conforms to RS-232C approved by EIA RS-422A (Max. total extension distance: 1.2 km) RS-485 (Max. number of connectable units: 31)(Max. total extension distance: 1.2 km)
Power ratingPower supply voltage 24 VDC, +10%, -20% Current consumption 250 mA max. 260 mA max.
Weight Approx. 80 g Approx. 100 g
* To connect the BL-1300 or SR-700, the OP-80616 conversion cable (sold separately) is required. In this situation, the communication baud rate is capped at 38400 bps.
Model N-R2 N-R4 N-UB N-L20Power supply for the code reader 5 VDC ±5% (650 mA)
Envi
ronm
ent
resi
stan
ce
Operating surrounding air temperature 0 to 50°CStorage ambient temperature -20 to +60°COperating ambient humidity 35 to 85% RH, No condensationOperating atmosphere No dust or corrosive gases present
Vibration resistance 10 to 55 Hz, complex amplitude 1.5 mm, 2 hours in each of X, Y, and Z directions10 to 55 Hz Vibration amplitude:
0.3 mm 2 hours each in X, Y, and Z directions
RatingPower voltage 24 VDC (+10%, -20%)Consumption current 380 mA or less
Mass Approx. 135 g Approx. 135 g (excluding the connector) Approx. 155 g Approx. 150 g
Term
inal
blo
ck
Input
Number of pins 2 (IN1 and IN2)Input format Bidirectional voltage inputInput maximum rating 26.4 VDCMinimum ON voltage 15 VDCMaximum OFF current 1 mA
Output
Number of pins 4 (OUT1 to 4)Output format Photo MOS relay outputOutput rating load 30 VDC, 100 mA*OFF time leak current 0.1 mA or lessON time residual voltage 1 V or less
Host interface 15 m or less (including the head cable) 1.2 km or less 5 m or less 100 m or less
* Both NPN and PNP input devices are supported.
SPEC I F ICAT IONS
Dedicated Power Supply/Communication Units
41
D IMENS IONS
Unit: mm
98
4
110
Approx. 40
90
4150
186
50
91 max.
100 to 240 VAC ø6.5, Cable length: 2 m
ø4.5
120°
mounting hole
43.2
5.95.9
63.2
2 - ø4.5mounting hole
75
55
5.5
5.5
21
BL-U2
40.3
35.8
44.257
133.8
4.8
(128.5)
49.9
R40
41.8
44.245
122.3
4.2
41.8R40
(128.5)
28.3
35.8
45
4.2
122.3
28.3
R40
44.2
128.557.4
41.8
35.8
60
113
3.5
52
38.9
35.9
(74.2)
(148.1)
R40
43.2
5.95.9
55
5.52 - ø4.5mounting hole
SD RDPOWER
READER
TERMINATOR
ONOFF
N-48
63.2
75 26
N-R2
N-UB
N-R4
N-L20
N-42/N-48
42
Model OP-88020Rated input 100 to 240 VAC, 50/60 HzRated output 12 VDC, 1.5 A max.Dimensions 104 × 43 × 31 mm (excl. cable area)Weight Approx. 125 g
• Using SR-PU1 or SR-LR1. AC cable required separately.
AC adapter
Model SR-UB1
Communication specifications
Wireless communication Bluetooth Ver. 2.1 + EDR Class 2Wireless communication distance Approx. 10 m (line-of-sight)USB communication USB 2.0 Full SpeedInterface USB-COM, USB keyboard
Environmental resistance
Ambient temperature 0 to +45°CAmbient storage temperature -10 to +50°CRelative humidity 35 to 95% RH (No condensation)Ambient storage humidity 35 to 95% RH (No condensation)
Rating Current consumption Approx. 80 mADimensions 20.6 × 11.2 × 65.4 mmWeight Approx. 15 gSupported OS Microsoft Windows 8 Professional or later 32bit/64bit (Except for Windows RT), Microsoft Windows 7 Professional or later 32bit/64bit
Communication unit (USB)
Model SR-LR1
Communication specifications
Wireless communication Bluetooth Ver. 2.1 + EDR Class 2Wireless communication distance Approx. 10 m (line-of-sight)
RS-232C9600, 19200, 38400, 57600, 115200 bpsNo-protocol, MC protocol, SYSWAY, KV STUDIO
EthernetIEEE 802.3, 10BASE-T / 100BASE-TXTCP/IP, FTP, MC protocol, Omron PLC link, KV STUDIO, EtherNet/IPTM, PROFINET
Control output
Number of points 3Output format Photo MOS relayMaximum rating 30 VDC, 100 mALeakage current when OFF 0.1 mA or lessResidual voltage when ON 1 V or less
Environmental resistance
Ambient temperature 0 to +45°CAmbient storage temperature -10 to +50°CRelative humidity 35 to 95% RH (No condensation)Ambient storage humidity 35 to 95% RH (No condensation)
Rating Power voltage / current consumption 24 VDC ±10% / Approx. 120 mA, or use dedicated AC adapter (12 VDC) / Approx. 230 mADimensions 62 × 125.8 × 40 mmWeight Approx. 160 g
Communication unit (Ethernet & RS-232C)
Handheld DPM Code ReaderModel SR-G100
ReceiverSensor CMOS image sensorNumber of pixels 900 × 900 pixels (2D code), 1280 × 900 pixels (Barcode)
Light emitter Illumination light source High-intensity red LED, High intensity blue LED
Reading specifications
Supported symbol
2D code QR, MicroQR, DataMatrix (ECC200), GS1 DataMatrix, PDF417, MicroPDF417, GS1 Composite (CC-A/CC-B/CC-C)
Barcode CODE39, ITF, 2of5(Industrial 2of5), COOP 2of5, NW-7 (Codabar), CODE128, GS1-128, GS1 DataBar, CODE93, JAN/EAN/UPC, Trioptic CODE39, CODE39 Full ASCII, Pharmacode
Minimum resolution
2D code 0.127 mmBarcode 0.1 mm
Focal distance 30 mm
Communication specifications
Wireless communication Bluetooth Ver. 2.1 + EDR Class 2Wireless communication distance Approx. 10 m (line-of-sight)Setup communication USB 2.0 Full Speed
Environmental resistance
Enclosure rating IP54Ambient temperature 0 to +45°C / When charging: 0 to +40°CAmbient storage temperature -10 to +50°CRelative humidity 35 to 95% RH (No condensation)Ambient storage humidity 35 to 95% RH (No condensation)Ambient light Sunlight: 10000 lux, Incandescent lamp: 6000 lux, Fluorescent lamp: 2000 luxOperating environment No dust or corrosive gas presentDrop resistance* 2.0 m, 50 times
Rating Power consumption Approx. 8.5 WDimensions 214 × 78.5 × 97.4 mm Weight Approx. 375 g (incl. rechargeable battery pack)Continuous usage time (Central value) Approx. 10 hours (reading count: 10000)Charging time Approx. 4.5 hours• This is a test value and is not guaranteed.
SPEC I F ICAT IONS
Ultimate Handheld Model with capability of handling SR-G100
43
D IMENS IONS
Unit: mm
FIELD OF VIEW FOR READING (TYPICAL)
Handheld DPM Code ReaderSR-G100
HolderSR-HL1
Communication unit (Ethernet & RS-232C)SR-LR1
4-in-line charging unitSR-CG14
SR-G100 CableSR-PU1
Connected (SR-G100 + SR-PU1)
Wall-mounted
Horizontal type
129
1.1
1.1
40.2
107.8
49
158
162
2020
40 11
4 × ø4.8125.8
62
(14.7)
110
52
5
(66)R33
(238.5)
(117.3)
(269.3)
100
4 × ø4.8
109.7
103.2
31
24
66
18.4
(240.4)
(214)
(137.9)
(134)
21.5
247.1
ø10.6
57.938
39.6 2530
6.5
52.4
42
63.4
16214
97.4
34
5378.5
Distance Minimum resolution Horizontal Vertical
30 0.127 45 45
70 0.25 65 65
110 0.5 85 85
Distance Minimum resolution Horizontal Vertical
80 0.25 99 70
120 0.5 127 90
200 1 184 129
2D code Barcode
44
Model HR-100 HR-100B HR-101 HR-101BType Standard High resolutionInterface Wired Wireless Wired WirelessLight source Red LED
Reading specifications
Supported symbol
2D QR, MicroQR, DataMatrix (ECC200), PDF417, MicroPDF417, GS1 Composite (CC-A/CC-B/CC-C), MaxiCode, AztecCodeBarcode CODE39, ITF, 2of5(Industrial 2of5), NW-7 (Codabar), CODE128, GS1-128, GS1 DataBar, CODE93, JAN/EAN/UPC, MSI, Postal, CODE11, 2of5
Minimum resolution
2D 0.169 mm 0.127 mmBarcode 0.127 mm 0.076 mm
Reading distance
2D 15 to 180 mm (Cell size = 0.254 mm) 0 to 114 mm (Cell size = 0.254 mm)Barcode 25 to 115 mm (Narrow bar width = 0.127 mm) 0 to 96 mm (Narrow bar width = 0.127 mm)
Wireless Standard — Bluetooth version 2.1 — Bluetooth version 2.1
Environmental resistance
Ambient temperature 0 to 50°CRelative humidity 5 to 95% RH (no condensation)Ambient light Sunlight: 10000 lux, Fluorescent lamp: 2000 luxDrop impact resistance 1.8 m 50 times on concrete
RatingPower voltage 4.0 to 5.5 VDC — 4.0 to 5.5 VDC —Current consumption Reading: 450 mA, Standby: 90 mA — Reading: 450 mA, Standby: 90 mA —
Operating time (when using HR-B1)* — Approx. 14 hours — Approx. 14 hoursDimensions 161 × 86 (head) × 71 mm (head)Weight Approx. 150 g Approx. 225 g Approx. 150 g Approx. 225 g
*Typical example at 1 scan/s
HR-100B/101B optionsModel HR-UC1 HR-PU1
Type Communication Unit Desktop holder
Wireless Standard Bluetooth version 2.1 -
RatingPower voltage 4.5 to 5.5 VDC
Current consumption (with AC adapter) 1000 mA
Charging time (with AC adapter) Approx. 4.5 hours
Dimensions 81 × 132 × 101 mm
Weight Approx. 180 g
Model BL-N70VE BL-N70UBE BL-N70RKE
Interface PS2 USB RS-232CFor KEYENCE products
Connector type Mini-DIN 6-pin USB (Type A) D-sub 9-pin (female)Light source Visible red semiconductor laser (Wavelength 650 nm)
Output 40 µWPulse duration 1.5 msLaser class Class 1 Laser Product (IEC 60825-1, FDA (CDRH) Part1040.10*)
Reading distance 0 to 177 mm (When the narrow bar width is 0.66 mm)Resolution 0.125 mm min.PCS 0.35 min.Scanning rate 72 scans per secondTarget codes CODE39, ITF, 2of5(Industrial 2of5), NW-7(Codabar), CODE128, GS1-128, GS1 DataBar, CODE93, JAN/EAN/UPCReadable bar width Maximum 3 to 40 digits (80 digits with CODE128 CODE-C)
Environmental resistance
Ambient light 4800 luxAmbient temperature 0 to 40°CRelative humidity 35 to 85% RH, No condensationOperating atmosphere No dust or corrosive gas
RatingsPower supply 5 VDC ±5%Current consumption 200 mA max.
EMI EN 55022, Class BWeight Approx.100 g
*The laser classification for FDA (CDRH) is implemented based on IEC60825-1 in accordance with the requirements of Laser Notice No.50.
SPEC I F ICAT IONS
SPEC I F ICAT IONS
Handheld Code Reader
Handheld 1D and 2D Code Reader HR-100 Series
Laser Handheld Barcode Reader BL-N70 Series
Main unit
45
0 1 2 3
Mounting distance
110 2430
312250
1000Unit: mm
Unit: mm
Distance 2D Barcode
110 0.063
0.082110 to 140 0.082
110 to 230 0.14
110 to 300 0.18 0.11
110 to 400 0.24 0.15
110 to 600 0.37 0.22
110 to 1000 0.61 0.37
MINIMUM RESOLUTIONSR-1000
Light from Code Reader
Make sure to install the reader at an angle.
3 STEPS WE NEED TO CHECK FOR STABLE READING
Specular Light
Specular Light
HOW TO BE A 1D/2D CODE SPECIAL IST WITH PROFESSIONAL SUPPORT FROM KEYENCE
Narrow Bar (NB) Width and Cell Size (CS)NB width is the thickness of the thinnest bar in a barcode, and CS is the size of the smallest 2D code cell (1 square).1.
Reading DistanceReading Distance depends on the NB width or the CS and the specification of each models. We need to check the code’s specifications before we define the true maximum reading distance.
2.
Installation PositionGenerally speaking, the code readers need to be installed at an angle to reduce specular light.In the case of the SR-1000 Series, mounting at an angle is not necessary because the SR-1000 Series has polarised lighting.
3.
15°
46
(1) Narrow bar width (NB): Thinnest bars(2) Wide bar width (WB): Thickest bars(3) Narrow space width (NS): Thinnest space(4) Wide space width (WS): Thickest space
Ratio - NB:WB = NS:WS = 1:2 to 1:3Quiet zoneWhite space of 10 times wider than the narrow bar width: must be included at the beginning and the end of a barcode in order for the reader to identify the beginning and the end of a code.
① ③ ②
④
Quiet zone
Cell
Quiet zone
Quiet zone (required for the 4 directions surrounding the code)
Quiet zone width Width of 1 cell
Alignment pattern L-shaped part
Quiet zone (required for the 4 directions surrounding the code)
QR Quiet zone width Width of 4 cellsMicroQR Quiet zone width Width of 2 cells
Alignment pattern 3 corners (QR) or 1 corner (microQR)
A 2D code quality verification standard established by the International Organisation for Standardisation.This standard is mainly used for evaluation of 2D codes printed on labels.
ISO/IEC 15415
This section introduces typical code quality verification standards.
DataMatrix QR
A 2D code quality verification standard for direct part marking (DPM) established by the Automatic Identification Manufacturers. This standard was established based on ISO/IEC15415 and also standardised by International Organisation for Standardisation in 2011.
ISO/IEC TR 29158 (AIM DPM-1-2006)
BARCODE
2D CODE
Quiet zone
Cell
TYPES OF 2D CODE VERIFICATION STANDARDS
Simple & Quick Solutions
KEYENCE draws from its decades of experience to provide the solution and troubleshooting techniques. Valuable knowledge of lighting, optics and 1D/2D codes is available for download.
Comprehensive Guides
References for installation, setup, and operation are also available for download to simplify the integration of KEYENCE barcode readers.
Free resource guides provide barcode basics, troubleshooting tips, and real applications
www.barcodereader.com
Your online portal to...A complete knowledge centre to assist you with all of your Auto ID needs
Get Useful Technical Literature FREE!
WOULD YOU LIKE TO LEARN MORE ABOUT
AUTO ID TECHNOLOGY?
BL-EU-GC9-GB 1057-1 600N05 Copyright (c) 2017 KEYENCE CORPORATION. All rights reserved.
www.keyence.com
NB=0.25 mm, NB:WB=1:2.5 NB=0.5 mm, NB:WB=1:2.5 NB=1.0 mm, NB:WB=1:2.5
CODE39
NB=0.25 mm, NB:WB=1:2.5 NB=0.5 mm, NB:WB=1:2.5 NB=1.0 mm, NB:WB=1:2.5
ITF
UPC-A EAN CODE128
Cell size=0.25 mm Cell size=0.25 mm
Cell size=0.63 mm Cell size=0.63 mm
Data Matrix
Cell size=0.25 mm
Cell size=0.63 mm
Cell size=0.25 mm Aspect Ratio=1:3
Cell size=0.63 mm Aspect Ratio=1:3
QR PDF417
NB=0.33 mm, bar width ratio=1:2:3:4 NB=0.25 mm, bar width ratio=1:2:3:4NB=0.33 mm, bar width ratio=1:2:3:4