Embed Size (px)
Citation preview
Scribd Explore Community
Upload a Document
Search Books, Presentations, Business, Academics...
Login
Sign Up | Log In
/ 23
Download
ECC AutoCAD Frequently Asked Questions To reverse the UNDO
command the correct entry is: -(a) REDO(b) REDRAW(c) Esc(d) UWhich of the following statements is true: -(a) ZOOM ALL will reach beyond the drawing limits if an object is there.(b) ZOOM ALL only reaches out to the drawing limits.(c) There is not real difference between ZOOM ALL and ZOOM E.(d) ZOOM ALL makes all objects visible irrespective of the layervisibility state. The command to scale a paper space viewport to half the drawn size is: -(a) Zoom 0.5x(b) Zoom 1/2x(c) Zoom 2xp(d) zoom 0.5xpWhich one of the following options of the UNDO command allows the undo facility to be disabled?(a) AUTO(b) CONTROL(c) END(d) GROUPWhich one of the following commands forces AutoCAD to revise the entire drawing taking into account the effect of changes within the system?(a) CHANGE(b) REDO(c) REDRAW(d) REGENWhich one of the following commands allows simultaneous pan and zoom?(a) ZOOM DYNAMIC(b) ZOOM EXTENTS(c) ZOOM CENTER
(d) ZOOM PANWhich one of the following commands CANNOT be undone?(a) XREF(b) SETVAR(c) SAVE(d) LISTThe MAXIMUM number of commands whose effect can be undone by the UNDO command is?(a) 256(b) 1000(c) all the command issued since the drawing was first created(d) all commands issued since the drawing was last loaded intothe drawing editor "The door of opportunity won't open unless you do some pushing." --Anon. PL. NOTE A few students musthave taken AutoCAD 2Dcourse, in which only 3Dwill not be taughtobviously. So, pleaseignore any questionsrelated to 3D.Anyway, majority of thequestions are on 2Donly, as it is the basicand fundamental one inAutoCAD.There is no hard and fastrule that all the staff hasknowledge in all thequestions. They will try theirbest to clarify your queries.These FAQ’s are valueaddition to our coursecurriculum and are dealt as
bonus to our students.
ECC AutoCAD Frequently Asked Questions Which one of the
following commands would be used to limit the movement of the cursor to specified increments?(a) AXIS(b) GRID(c) ORTHO(d) SNAPWhich one of the following commands can be used to turn the grid through 45 degrees ?(a) AXIS(b) GRID(c) ROTATE(d) UCSWhen producing a drawing of a site plan measuring 300m x 275m dimensions should be entered to a scale of?
(a) 1:1(b) 1:10(c) 1:100(d) 1:1000Which one of the following BEST defines a 'prototype' or 'template' drawing?(a) the drawing which is currently being edited by AutoCAD(b) a drawing used to store a library of standard symbols(c) a means of setting the initial drawing environment for new drawings(d) a file which holds details of the display, digitiser, and plottersthat AutoCAD is currently configured for In order for the grid command to work correctly two settings have to be established. (a) The correct limits set and an appropriate setting of the grid value set(b) Limits set to ON and an appropriate setting of the grid value set(c) Snap and Osnap set(d) Gridmode and osmode both set to 1When using AutoCAD for the design of a mechanical component measuring 1000 mm by 500 mm, the dimensions would normally be entered at a scale of?(a) 1:1(b) 1:2(c) 1:5(d) 1:10How many entity colours does AutoCAD support?(a) 255(b) 16(c) unlimited(d) 64A house measures 15000 mm x 8000 mm in plan view. When drawing the plan view only which one of the following sets of limits would be BEST to use?(a) 0,0/20000,15000(b) 0,0/20,15 metres(c) -2000,-2000/20000,15000
(d) -2000,-2000/15000,8000"The ability to accept responsibility is the measure of the man." --Roy L. Smith
ECC AutoCAD Frequently Asked Questions What option would be
selected following the TEXT command to select a different type of text to that currently in use?(a) NEW(b) FONT(c) SET(d) STYLEThe special character string that causes text to be underlined is :-(a) u%%(b) %%u(c) %u%(d) %uWhich of the following is an AutoCAD font for mathematical symbols?(a) MATHC
(b) MATHFONT(c) MATHSYM(d) SYMATHThe effect of QTEXT being ON is to?(a) place text directly in the drawing as defined(b) speed up drawing regeneration by replacing text with rectangles(c) use simplified text font to replace complex text font(d) allow automatic line spacing of textual inputThe text option that prompts the user for two endpoints and then automatically calculates the text height and positions the text between the two points is chosen from this AutoCAD promptAlign/Fit/Center/Middle/Right/TL/TC/TR/ML/MC/MR/BL/BC/BRWhich one is correct?(a) Center(b) Align(c) TR(d) FitWhich of the following commands will NOT place some form of text within the drawing:-(a) MTEXT(b) DTEXT(c) STYLE(d) ATTDEFWhen is a space NOT interpreted as the enter key?(a) When entering text.(b) When using the PEDIT command.(c) When selecting objects.(d) The space is always an alternative to the enter key.The special character string that is used to print the diameter sign is:-(a) %%c(b) %%d(c) %dia
(d) c%%"When you can't solve the problem, manage it." --Dr. Robert H. Schuller
ECC AutoCAD Frequently Asked Questions Which one of the
following is the AutoCAD filename extension used to indicate a compiled text font?(a) HDX(b) SHP(c) SHX(d) TXTWhich one of the following could be an AutoCad drawing file?(a) DWG.PLAN(b) PLAN.DWG(c) DRAW.FLE(d) FILE.TXTThe line types definitions are stored on the system with an extention of?(a) .LTT(b) .LSP(c) .LIN(d) .LATWhich one of the following key combinations is a standard windoze short cut that does not relate to the clipboard.(a) Ctrl + S(b) Crtl + X(c) Ctrl + V(d) Ctrl + CThe shortcuts or command alias that allows us to key in L and AutoCAD responds with LINE are stored ina file named :-(a) SHORT-CUT.TXT(b) ACAD.COM(c) ACAD.PGP(d) ACAD.EXEWhich of the following key combinations issues the ISOPLANE command?(a) CONTROL and T or F4(b) CONTROL and E or F5(c) CONTROL and D or F6(d) CONTROL and I or F7Which of the following statements is true?(a) Backup copies of drawing files are saved in the "Support" folder.(b) Backup copies of drawing files are saved in a folder set by the user.(c) When a drawing is initialy saved a backup copy is made with a .BAKextension. This can be renamed as a .DWG at a later date. (d) When a drawing is saved for the second time a backup copy is made with a .BAK extension. This can be renamed as a .DWG at a later date. Which one of the following key combinations will toggle SNAP?(a) Either F7 or CONTROL and G(b) Either F6 or CONTROL and D(c) Either F9 or CONTROL and B(d) Either F8 or CONTROL and OWhich one of the following key combinations will toggle COORDS?(a) Either F7 or CONTROL and G(b) Either F6 or CONTROL and D
(c) Either F9 or CONTROL and B
(d) Either F8 or CONTROL and O
ECC AutoCAD Frequently Asked Questions When designing an
integrated circuit measuring 5mm x 5mm the measurements should be enteredusing a scale of:-(a) 1:1(b) 1:2(c) 1:10(d) 1:5Which one of the following best discribes a 'user co-ordinate System'? (a) The pair of co-ordinate points which define the lower left and upper right corners of the drawing boundary (b) A series of co-ordinate points stored as variables for later use in the drawing (c) A co-ordinate system whose origin is located anywhere in three dimensional space (d) The master datum from which all measurements are taken. Absolute co ordinates are measured from the :-(a) current UCS origin.(b) last point entered.(c) lower left hand corner as set by LIMITS command.(d) world co ordinate origin.The position of a mouse on a surface is NOT directly related to the position of the screen cursor. Thismakes the mouse unsuitable for:-(a) Selecting two points on the screen for a line draw operation.(b) Tracing an existing drawing.(c) Selecting menu items on the screen.(d) Sketching.Which one of the following is an AutoCAD absolute point co-ordinate?(a) @361,270(b) 60<90(c) 361,270(d) None of the aboveWhen drawing a digital watch measuring 30mm x 25mm, which one of the following would be the BESTset of drawing limits to use?(a) 0,0/40,35(b) 0,0/30,25(c) 0,0/100,100(d) 0,0/297,210To continue drawing a line from the last known point, enter :- (a) 0,0(b) @(c) Next(d) a or b "Opportunities multiply as they are seized; they die when neglected. Life is a long line ofopportunities."
--John Wicker** AutoCAD Frequently Asked Interview QuestionsAutoCAD Frequently Asked Interview QuestionsReads:10,425Uploaded:01/29/2009Category:Uncategorized. Tags:Autocad Rated:(24 Ratings)DownloadPrintMobileCollectionsReport
DocumentThis is a private document. kishore.pd3d Follow
Share & EmbedLink / URL: Embed Size &
Settings: Width: Auto
Height:
Start on page:
Preview View:
Related
1. 330 p.
AutoCAD 2002 ( Myanmar)
Reads: 2845
8 p.
An Introduction to AutoCAD
Reads: 206
8 p.
An Introduction to AutoCAD
Reads: 315
2. 228 p.
3DAutoCAD handleiding
Reads: 242
228 p.
AutoCAD 3D Tutorial
Reads: 320
228 p.
3D AutoCAD2009-3d
Reads: 374
3. 228 p.
3D AutoCAD2009-3d
Reads: 353
228 p.
3D AutoCAD 2009
Reads: 1277
228 p.
3D_AutoCAD_2009 3d
Reads: 2815
4. 53 p.
1st Lecture
Reads: 105
33 p.
Step by Step AutoCAD Tutorial - Do...
Reads: 18756
8 p.
364
Reads: 236
5. 8 p.
Auto Cad
Reads: 652
200 p.
AutoCAD 3D Tutorial
Reads: 138
34 p.
4000772-Autocad-3d-2007
Reads: 1702
6. 38 p.
Using Activa x
Reads: 896
17 p.
ch1
Reads: 105
4 p.
Preservation Trial Exhibits
Reads: 0
7. 2 p.
Guru Nanak Dev University Simu Bed...
Reads: 0
2 p.
eticket
Reads: 0
9 p.
GetRichQuick.con Participants
Reads: 0
8. 1 p.
Manuscript 1
Reads: 0
378 p.
(1862) Thebes: Its Tombs and Their...
Reads: 0
158 p.
Tarzan of the Apes Reswung [Tarzyn...
Reads: 0
9. 63 p.
Advanced Accounting Hoyle 9th Edit...
Reads: 0
More from this user
1. 3 p.
Sachin Tendulkar: Curriculum Vi...
From: kishore.pd3d
Reads: 17
558 p.
Electric Circuits Idc
From: kishore.pd3d
Reads: 4,595
18 p.
JTO test paper
From: kishore.pd3d
Reads: 12,767
2. 20 p.
java script
From: kishore.pd3d
Reads: 1,098
1 p.
office 2003 keys
From: kishore.pd3d
Reads: 7,950
8 p.
sunsoft selection order
From: kishore.pd3d
Reads: 579
3. 1 p.
address
From: kishore.pd3d
Reads: 164
9 p.
infocon selection order
From: kishore.pd3d
Reads: 2,177
1 p.
shadenagar
From: kishore.pd3d
Reads: 162
4. 1 p.
palamour
From: kishore.pd3d
Reads: 150
1 p.
naryanapet
From: kishore.pd3d
Reads: 149
1 p.
muthial
From: kishore.pd3d
Reads: 157
5. 1 p.
kulapure
From: kishore.pd3d
Reads: 314
1 p.
jadesarla&condagel
From: kishore.pd3d
Reads: 122
1 p.
gadwale
From: kishore.pd3d
Reads: 233
6. 1 p.
aundolu
From: kishore.pd3d
Reads: 127
1 p.
ach pet
From: kishore.pd3d
Reads: 160
1 p.
phatikonda
From: kishore.pd3d
Reads: 133
7. 1 p.
phatikonda&manthrailam&enameganure
From: kishore.pd3d
Reads: 150
1 p.
paniam
From: kishore.pd3d
Reads: 142
1 p.
nandila
From: kishore.pd3d
Reads: 126
8. 1 p.
nandikottur & srisailam
From: kishore.pd3d
Reads: 133
1 p.
manterayalam
From: kishore.pd3d
Reads: 118
1 p.
kodumoru
From: kishore.pd3d
Reads: 127
9. 1 p.
karnool
From: kishore.pd3d
Reads: 148
Login to Add a Comment
rameshpr07 left a comment
[email protected] / 06 / 2010 Reply
Amanuel Weldu readcast this 07 / 06 / 2010Learn more about Readcast.
Sameer Bhatia read this 07 / 05 / 2010Learn more about Readcast.
maha_vin2942 readcast this 06 / 23 / 2010Learn more about Readcast.
vafaq readcast this 06 / 17 / 2010Learn more about Readcast.
Amanuel Weldu readcast this 05 / 11 / 2010Learn more about Readcast.
Amanuel Weldu readcast this 05 / 07 / 2010Learn more about Readcast.
Mihaela Miha readcast this 04 / 28 / 2010Learn more about Readcast.
mala.anantharaj2693 left a comment
faq10 / 22 / 2009 Reply
kishore.pd3d left a comment
for more like these please visit www.rocklineguyz.blogspot.com03 / 20 / 2009 Reply
Ads by Google
2D & 3D Animation DegreePursue Course in Animation fromBest Institutes in India. Apply Now
MingleBox.com/Animation
Automatic DimensioningAnnotate a Drawing in Seconds.for AutoCA D. 30 days for free.
adaucogit.com/AutoDimension
Autocad Draughtsman JobsEngineering Companies are HiringSubmit Resume & Apply Now!
MonsterIndia.com
Send me the Scribd Newsletter, and occasional account related communications.
Why Sign up?
Discover and connect with people of similar interests.
Publish your documents quickly and easily.
Share your reading interests on Scribd and social sites.
Email address:
Upload a Document
Search Books, Presentations, Business, Academics...
Scribd
About Press Jobs Contact Blog Scribd Store
Legal
Terms - General Terms - API Terms - Privacy Copyright
Help & Tools
Getting Started Community Guidelines Support & FAQ Web Stuff
Partners
Partners Branded Reader Developers / API
Subscribe to Us
On Scribd On Twitter On Facebook
What's New
We have updated our Terms of Service Branded Reader Desktop Uploader
scribd. scribd. scribd. scribd. scribd. scribd. scribd. scribd. scribd.
