Upload
lyduong
View
215
Download
1
Embed Size (px)
Citation preview
Page
1LEADING PRACTICAL CONCRETE SOLUTIONS
Greetings to all!
Being involved in the construction industry is
both a great opportunity and challenge!
ANCON is now more than 20 years old!
ANCON initially started in 1996 as concrete
construction consultants. In 2004, it expanded its
horizons to become representatives for Somero
Enterprises Inc., suppliers of Somero Laser Screeds and also representing
Allen Engineering, Suppliers of construction equipment. These representations
have continued successfully.
In early 2017, a decision was made to separate consultancy and equipment
representation and sales.
As from 1st April 2017, consultancy services are provided by a company
named “Concrete Methods” with its main consultants to be Robert Landorf
and Peter Killeen. A cooperative relationship remains with ANCON.
Equipment representation and sales remains with ANCON with the same
ANCON Team in Australia, New Zealand and South East Asia including
Thailand, Vietnam, Singapore, Malaysia, Philippines and Indonesia. This new
structure allows ANCON to focus on its main bunsiness and supporting its
equipment customers and building relationships.
Our representative team is presented on a separate document and on our
website at www.anconbeton.com
Best regards,
Ian Burnett
Managing Director
ANCON Beton PTY LTD
CONTENTS
Concrete Floor Consultancy 2-6
Floor and Pavement Projects 2
ANCON Floor Package 3-6
SOMERO® 7-16
S-22E Laser Screed 7
S-15R Laser Screed 8
S-10A Laser Screed 9
S-940 Laser Screed 10
S-485 Laser Screed 11
Copperhead XD3.0 Laser Screed 12
Power Rake 3.0 12
Mini Screed C 13
SP-16 Concrete Hose Puller 14
3-D Profiler System 15
SITESHAPE System 15
Support Kits 16
ALLEN® 17-29
Truss Screed 17
Magic Screed 18
Triple Roller Tube Pavers 19
Work Bridges 20
HDX600 Ride-on Trowel 21
MSP455 & MSP 445 Ride-on Trowel 22
MP235 & MP215 Ride-on Trowel 23
Walk-Behind Trowels 24
Pans and Blades 25
Power Sprayer 26
Hand tools 27
Marshalltown® Hand tools 28
Wagman Revolution Rotary System 29
BARTELL GLOBAL 30-32
Morrison Material Spreader 30
SPE Shotblasters & Scarifiers 31
SPE Edge Grinder 32
Innovatech Planetary Grinder 32
ANCON Equipment Accessories 33
ANCON Warehouse and Customer Service 34
MD Message
Page
2www.anconbeton.com
FLOOR AND PAVEMENT PROJECTS
Qantas Stores Facility
Australia
Bunning’s Stores
Australia
Baulderstone, Brisbane Airport
Australia
Masters Store Springfield,Brisbane, Australia
Diary Giant Warehouse
Kuala Lumpur, Malaysia
MSAS Project
Penang, Malaysia
Drag Strip
Perth
OKH Holdings
Singapore
Trung Dung Constructions
HCMC, Vietnam
Nestle Factory
Manila, Philippines
BSY Constructions
Thailand
Boustead Project
Singapore
Page
3LEADING PRACTICAL CONCRETE SOLUTIONS
What is a BAD FLOOR?
What is an ANCON FLOOR?
This floor was cheap to build however it is very expensive to repair and maintain. The total cost of this floor after rectification is much higher than the cost of an “ANCON Floor.”
The floor defects are:• Low Surface Quality and High Abrasion
• Not Flat or Level
• Delamination Defects
• Higher Surface Abrasion
• Poor and inefficient for Operator• High Maintenance Costs
• Poor Joint Performance
The “ANCON Floor” is defined as:• Flat & Level
• Burnished with High Quality Surface or hard trowel finish• High Abrasion Resistance
• Shake-On Hardener or no Shake-On Hardener
• Far Less defects
• Less Rectification Costs• Fast Track Program
• Most Economical Construction Method
• Joints square and level for smooth transition
Essential Elements of the “ANCON Floor”
1
2
3
4
5
Application of World’s Best Construction Practice – “ACI Standards”
A Rigid Construction Process is Followed
Latest Technology
Good Quality Materials - The Concrete Mix
World’s Leading Construction Equipment
Retail Floor Australia
Multi Level Warehouse floor, South East Asia
ANCON FLOOR PACKAGE (FOR SE ASIA ONLY)
Page
4www.anconbeton.com
ANCON FLOOR PACKAGE (FOR SE ASIA ONLY)
Specification Advice Edge
FormworkJoint Advice
Technology - World’s Best
Practice
World’s Best Equipment
Concrete Supply & Mix
Consultancy
Measurement
Curing
TrowellingSupervision, Trained &
Experienced
Level & Strike Off with Laser Screed
GREAT QUALITY
The Process Steps and Outcomes
ANCON tailors packages of project
management and floor construction consultancy combined with the right
equipment to meet the needs of each
customer and project.
ANCON has consulted, project managed
and trained on approximately 1,000 sites
in Australia, New Zealand and South East
Asia over the past 18 years. ANCON’s vast
knowledge and experience enables its team
to advise and deliver quality results to its
customer.
Warehouse Floor Melbourne Australia
ANCON FLOOR - The Process Segments
Page
5LEADING PRACTICAL CONCRETE SOLUTIONS
Essential Parts 0f the Process
IMeet with the customer and establish needs for immediate project and future projects.
IISpecify equipment needs by way of:• Screeding and Leveling Equipment
• Hand Tools and Straightening Tools
• Finishing Machines
III
Measuring Equipment for Flatness and Levelness to ACI Standards
IV
Be at the jobsite location to train, and coach the
contractors chosen “ANCON Floor” team to:
• Assemble Equipment
• Use the Equipment
• Clean the Equipment
• Trouble Shoot the Equipment
• Service the Equipment
V
Send a Senior Floor Consultant to site to train and coach the contractors chosen “ANCON Floor”
team to complete the process of floor construction including but not limited to:• Formwork Set-Up
• Pump Set Up
• Concrete Placing
• Concrete Rough Leveling
• Concrete Fine Leveling
• Use of Straightening tools to cut off the “bumps”
• Walk-behind trowels to open the surface
• Ride on Trowels with pans method
• Ride on Trowels with blades for finishing• Application of curing compound
• Floor Flatness and Levelness Measurement
• Measure floor with Dipstick• Prepare report to ASTM 1155 & ACI 117 requirements (as well as TR34).
ANCON Training Southeast Asia
ANCON Coaching Southeast Asia
ANCON FLOOR PACKAGE (FOR SE ASIA ONLY)
Page
6www.anconbeton.com
The ANCON FLOOR SYSTEM is:-
• Flat
• Level
• Hard
• Defect Free
• Looks Good
• Almost Nil Maintenance
• Best Value for Money
The ANCON FLOOR is accomplished by ANCON assisting the following:
• Establish Customer Needs
• Concrete Mix Review and Trial Mixes
• Supply Equipment including Somero Laser Screeds and Allen Engineering
Walk-behind, Ride-on Trowels, Hand Tools and Straightening Tools.
• Face Construction Technologies USA Dipstick
• Equipment Trainer on site for 5-7 days
• Floor Construction Consultant on site for 5 -7 days
ANCON will prepare a Floor Package to meet your needs!!!
ANCON has successfully delivered packages in:• Singapore
• Thailand
• Vietnam
• Indonesia
• Malaysia
• Australia
• New Zealand
• Fiji
• New Caledonia
An example of the “ANCON Floor” system supplied to Bangkok, Thailand
Retail Floor Brisbane AustraliaWorld Class Floor
ANCON FLOOR PACKAGE (FOR SE ASIA ONLY)
Page
7LEADING PRACTICAL CONCRETE SOLUTIONS
The S-22E Laser Screed® is the latest machine from Somero®. The S-22E allows the contractor to have even more control and
options than ever before. By having this option to build your own laser screed® model your way.
Features and Benefits• Improved floor quality• Full color soft touch LCD display with integrated diagnosis
• Somero Floor Levelness System® (optional)
• Column-Block Protection
• OASIS Laser Control System
• 360° Machine Rotation with 2-wheel, 4-Wheel and Crab Steering
• Somero Quick GradeSet System™
• Hydraulic oil pre-heater
• Heated seat, hand and foot areas
• Automatic throttle
• Automatic soft landing
• Programmable Quick Pass
• Compatible with the 3-D Profiler System®
Model S-22E
Overall Width 4.3m at screed head
2.2m at outside of tires
Overall Length 8.4m (transport mode)
Overall Height 2.5m top of seat back
Operating Weight (kg) 6,169 Kg (Base Machine)
6,622 Kg (With All Options)
Boom Reach (m) 6.10
Screed Head Size (m) 4.3 / 3.7 (optional)
Engine 65 HP / 48.5 kW Cummins Diesel QSS 2.8, Tier
4 Final
Grade Control System Open Architecture SOMERO® Integrated System
(OASIS)
S-22E Laser Screed® Model Support Kit
(For details, refer to page 50)
S-22E Laser Screed® equipment on
the job
Optional Features
• 3.6m or 4.3m Roller Plow
• Hydraulic Pressure Washer (3,000 PSI | 207 bar)
• Extra Lower-Frame Storage Compartment
• Powered head rotation on the end of the boom
• Tire option
• Spare parts kits
S-22E
Page
8www.anconbeton.com
S-15R
Model S-15R
Dimension - L x W x H (m) 6.25 x 2.21 x 1.93 (w/o masts)
Operating Weight (kg) 4,377
Boom Reach (m) 6.10
Screed Head Size (m) 3.00 or 2.4 (optional)
Engine 44.3HP (33 kW) Mechanical Naturally Aspirated Kubota Diesel
Grade Control System Open Architecture SOMERO® Integrated System (OASIS)
S-15R Laser Screed® equipment on the job
S-15R Laser Screed® Model Support Kit
(For details, refer to page 50)
The S-15R Laser Screed® concrete-leveling machine screeds 18m2 per pass with a 6.1 metres telescopic boom reaching out over
the concrete. The powerful hydraulic system controls the elevation of the plow and auger to maintain grade so you can get a much
smoother surface as compared to rigid mounting style machines, even with very low slump concrete!
The S-15R is 3 metre wide at the stabilizers, with fully integrated head assembly plows, levels and consolidates in a single automated
pass. The plow rakes down high concrete filling in low spots and the Somero® Quick Pass feature rakes down excessively high
concrete without manual intervention. The hydraulically driven auger cuts the surface to grade and displaces excess concrete to the
side via a double flight auger and the offset head design minimizes side overlap. An electric vibrator saves weight and applies equal harmonics across the entire vibrator width. The S-15R is a high performing and sophisticated machine with great value.
Additional features of the S-15R are:-
• 360° powered machine rotation
• Compatible with the 3-D Profiler System®
• 4 wheel, crab steering
• 4 Stabilizers in-line with wheels
• Flip-down plow extension
Page
9LEADING PRACTICAL CONCRETE SOLUTIONS
S-10A
S-10A Laser Screed® equipment on the job
NEW FEATURES:
• New 3 metres screed head allowing for 18.6m2 per pass
• Operator positioned in centre of machine for optimum operator sight line
• 6.1 metre boom
• Customised OASIS Laser Control System
• Compatible with the 3-D Profiler System®
• Easily transported on a truck or trailer
Model S-10A
Dimension - L x W x H (m) 21.7 x 2.0 x 2.1
Operating Weight (kg) 3,515
Boom Reach (m) 6.10
Screed Head Size (m) 3.0
Engine 35.0HP (26 kW) Kubota Diesel Engine
Grade Control System Open Architecture SOMERO® Integrated System
(OASIS)
S-10A Laser Screed® Model Support Kit
The all new S-10A has been engineered for productivity and convenience. It is compact in size at just 3,515kg, but highly productive.
With a 6.1 metre telescopic boom and our patented, fully automated, self-leveling 3 metre screed head, the S10A allows customers
to screed 18.6m2 per pass. Due to its light weight, the S-10A can be transported on either a flatbed truck or a tow behind trailer.
The S-10A has operator’s convenience unmatched in the industry. The Somero Quick Grade Set SystemTM enables the operator
to easily and accurately set grade in minutes. With only two steps, the operator can easily assesses the centrally located operator
platform for direct line of sight to the pour while screeding and the OASIS Laser Control System from Somero allows the operator to
fine tune and calibrate the machine without leaving the operator area.
Page
10www.anconbeton.com
S-940
The S-940 provides unmatched versatility and simplicity with increased power and productivity! Available with a fully automated self-
leveling screed head, raking/fine grade head, this powerful machine has fewer switches and an easy-access hinged console, making any job comfortable for your operator. This machine features an auger.
It has a foldable elevation beam that provides a narrower profile during transport with the added benefit of providing easy entry to jobsites. The off-set screed head provides less of an overlap per pass. With the option of a powerful diesel engine, this model is
unstoppable.
Model S-940
Height 5’ (1.5m)
Weight (Gas Engine) 1,653 lbs (750kg) - with 10’ head
Weight (Diesel Engine) 1,775 lbs (805kg) - Diesel engine with 10’ head
Length 11’ (3.35m)
Width 4’9” (1.45m) - Transport Mode
Head Size 10’ (3m); 11’3” (3.4m) with Auger Motor
Head Clearance 14 1/2” (.37m)
Ground Clearance 10 3/4” (.27m)
Standard Tire Ground Pressure 34 psi (234.4 Kpa)
ATV Tire Ground Pressure 10 psi (68.9 Kpa)
Engine Options Subaru EH65 (22hp-16Kw) or
Kubota DH 902 Diesel (24.8hp-18Kw)
Fuel Capacity 4 Gallons (15L)
Grade Control System OASIS (Open Architecture Somero Intergrated System)
Elevation Control Dual Hydraulic Cylinders with Somero Quick GradeSet System TM
S-940 Laser Screed® Model Support Kit
S-940 Laser Screed® equipment on the job
Page
11LEADING PRACTICAL CONCRETE SOLUTIONS
S-485
This ride-on S-485 Laser Screed® model does more than just screed concrete, it also rakes to three operated controlled Somero®
Quick Pass levels. This is just the beginning of what this machine can do for the contractor. The S-485 Laser Screed® machine is the
right machine for contractors who want better performance when you encounter difficult applications such as:-
• Slab-on-Grade or Slab-on-Deck
• Compatible with the 3-D Profiler System® (optional)
• Chaired Rebar or Mesh or Fibres
• Warehouses
• Factories
• Shopping Centres
• Hard Stand Pavements
The benefits of the S-485 include:-• Incredible Pulling Power
• Easy to Operate
• Stand on Ride on operation
• OASIS Control System
• Simple, Fast and Accurate Grade Set-up
• Lightweight and Versatile
• Screed in Any Direction
• 4-Wheel Drive
• Utilise as a Laser Screed or Laser Controlled Rake
• Utilises Somero’s Proven Technology
Model S-485
Dimension - L x W x H (m) 2.99 x 2.57 x 1.29 (at head)
2.99 x 1.10 x 1.29 (at wheels)
Operating Weight (kg) 493
Engine 20.8 HP (15.5kW) – HONDA GX630
Start Electric Start
Control Manual throttle and choke with electric shutoff
Propulsion 4-wheel drive with hydraulic drive motors
Screed Head Width (m) 2.46 or 1.8m (Rake / Sub-Grade Head)
Ground Pressure 22 psi (28 kPa)
S-485 Laser Screed® equipment on the job
S-485 Laser Screed® Model Support Kit
Page
12www.anconbeton.com
Copperhead® XD 3.0TM
The CopperHead® XD 3.0TM equipment uses Somero® Patented Laser-
Leveling Technology to cut the concrete to a finished grade, screed it flat, and vibrate it smooth in one pass. You will be able to work faster because
the CopperHead® XD 3.0TM sets grade automatically, allowing the operator
to move quickly and efficiently through the work area.
Model Copperhead® XD 3.0TM
Dimension - L x W x H (m) 2.74 x 0.91 x 1.10
Screed Head Options (m) 2.4 / 3.0
Operating Weight (kg) 386
Ground Pressure:STD Tire: PSI (kPa) 29.4 (197)
Hi-Float Tire: PSI (kPa) 4.1 (28.7)
Engine Options SUBARU EX40 14.0HP (10.4kW) Petrol Engine (Standard)
HONDA 13.0 HP (9.6 kW) Petrol Engine (Optional)Copperhead XD 3.0TM Laser Screed®
equipment on the job
PowerRake® 3.0
Model PowerRake® 3.0
Dimension - L x W x H (m) 2.65 x 2.13 x 1.64 (at head)
2.65 x 1.01 x 1.64 (at wheels)
Operating Weight (kg) 481
Ground Clearance (m) 0.29
Engine Options HONDA GX630 20.0 HP (14 kW)
*Diesel Option available
Start Electric Start with Secondary Pull Cord
Control Manual Throttle & Choke with Electric shutoff
Propel 4 Wheel-drive with Hydraulic Motors
Plow Elevation Control Laser Control of Head via Head Lift Cylinders
Head Lift 3.8cm Hydraulic Cylinders and Manual Electric Switch
Steering Control Proportional joystick and valve driving a Hydraulic Cylinder
Propulsion Control Proportional joystick and valve driving Hydraulic Motors
The PowerRake® 3.0 innovative and patented design was developed to allow a single operator the ability to rake more concrete in
less time, with no manual labor. The ride-on design is a proven labour-saving device and takes the back-breaking work out of raking
concrete.The PowerRake® 3.0 with a quieter yet more powerful engine allows the operator to ride on the machine and rake the
“dumped” concrete down to grade to +/-6.35mm accuracy, ready for fine levelling and screeding.
Page
13LEADING PRACTICAL CONCRETE SOLUTIONS
Mini Screed™ C
The Mini Screed™ C provides superior producitivity and levelness on all types of job applications. Small commercial, upper deck and
residential projects can now have the same high quality, professional Laser Screed® floors that you only expect on a large commercial project. Save on yield and reduce manual efforts on placements while improving floor quality.
Mini Screed™ C Applications:• Slab-on-Grade & Elevated Deck
• Post Tension
• Rebar
• Chaired Mesh
• Metal Deck
• Radiant Floor Heating
Model Mini Screed™ C
Dimension - L x W x H (m) 1.84 x 0.78 x 1.04
Operating Weight (kg) 213
Tires (m) 0.64 x 0.20 x 0.36
Engine 6.0 HP (4.47kW) ROBIN 4-Stroke Petrol Engine
8.0 HP (5.9kW) HONDA GX240 Petrol Engine
Laser Controls Trimble SSR Receivers
Auto Level Standard
Self propel Standard
Vibrator Soft Start Standard
Screed Head Size (m) 1.8
Mini Screed™C on the job
Mini Screed™C Support Kit
(For details, refer to page 16)
Page
14www.anconbeton.com
SP-16 CONCRETE HOSE PULLER
Somero’s SP-16 has revolutionized the efficiency of operating concrete pump hoses. Featuring remote-controlled hose handlers, the SP-16 Line-Pulling and Placing System is equipped with powerful engines, in addition to load-sensing and variable-displacement
hydraulics, that move lines with ease.
Besides being the most nimble concrete placing machine on the market, this concrete hose pulling machine is sure to enhance
productivity, create labor savings, and reduce the risk of injury associated with moving concrete pump hoses by hand.
Enter the next generation of concrete placing equipment with Somero’s SP-16. Your concrete delivery lines will never be the same.
Features and Benefits
• Remote-control operation utilizes simple AA batteries
• Intelligent Steering adjusts steering angle to prevent stress
and damage to components
• Steering capabilities include two-wheel, four-wheel, and crab-
style options
• Load-sensing variable-displacement hydraulics provide
optimal power
• Return-to-center steering automatically realigns wheels
• Conveniences include LED work lights, tie-down points for
transport, and various clamping locations
• Jobsite safety is increased
Model SP-16
Length (m) Puller: 1.4 Placer: 1.7Width (m) 1.3
Height (m) Puller: 1.1 Placer: 1.1Operating Weight (kg) Puller: 471.7 Placer: 521.6Ground Clearance (m) 0.178-0.184
Steering Angle 180 deg
Engine 11.7 HP (8.7kW) HONDA GX390 Petrol Engine
Tires (Standard) Carlisle 18 x 8.5
Clamp Opening (mm) 10.22
SP-16 Concrete Hose Puller on the job
Page
15LEADING PRACTICAL CONCRETE SOLUTIONS
3-D Profiler System®
The Somero® 3-D Profiler System® is a technological breakthrough which allows concrete to be placed over contoured sites (shaped
like a golf course) automatically using a Somero Laser Screed®. The highly accurate screeding of concrete, until now restricted to
single and dual plane applications, is now available to meet the demands of real 3-dimensional paving.
Concrete paving is a multi-billion dollar market and gaining
momentum. A great opportunity exists for Laser Screed®
equipment owners to capitalize by expanding services to
include concrete paving. It can double the use of the S22E,
SXP-D, S-15R and S-15m Laser Screed®.The 3-D Profiler System® is ideal for use on parking lots, loading dock areas,
service ramps, and driveways. It’s also being used to white
top and repair roadways, runways, taxiways, and bridges.
Slope and elevation changes are now completely practical
and cost effective to achieve.
The 3-D Profiler System® is easy to learn and use. It is
compatible with all of the latest Laser Screed models such
as the Copperhead, S-840 and the Mini-Screed C and it is
also adaptable to earlier models .
The 3-D Profiler System® comes complete with all necessary
components to get you profitably paving right away.
Ever wish that you could have the simplicity of the Somero® 3-D Profiler System® for your motor grader? Now it’s possible with SiteShape™,
which takes the same field-proven technology and adapts it to simplify your fine-grading applications.
This system allows for grade shaping automatically using your motor
grader, dozer, or other grading machine to meet the demands of real
three-dimensional grade shaping.
Ideal for use on parking lots, loading dock areas, service ramps, and
driveways – it can also be used on roadways, runways, taxiways, or
any multi-sloped surface. Slope and elevation changes are now simple,
practical, and cost-effective to achieve. The SiteShape™ System is
compatible with most makes and models of grade cutting machines.
The system uses most components of the 3-D Profiler System®
SITESHAPETM System
Page
16www.anconbeton.com
SOMERO SUPPORT KITS
S-22E EMERGENCY SPARES KIT
Guard Auger Bearing Seal, Vibrator Bearings, Vibrator Motor, Compression Springs, Auger Motor, Auger Bearings,
Hydraulic Return Filter, Hydraulic Pressure Filter, Angle Sensor, LR210 Laser Receiver, GCS21 DCB (only for
GCS21 equipped SXP-D), Oil Filter, Air Filters, Fuel Filter, Fan Belt, Rocker Switches, Boom Cord, 8ft Coil Cable,
Various Valves & Cartridges, Stabilizer/Steer/Auger Pressure Comp, Pod Bearings, Centaflex Element, Coupling Jaws CSV, Red Spider CSV, Snap Ring, Fiber Washer, Boom Roller Bearings, Multimeter, Hydraulic Pressure
Sensor, Stabilizer/Steering Sensor Cable.
S-15R EMERGENCY SUPPORT KIT
SSR2 Receiver, AS212-S Angle Sensor, AS212-S Cable, SSR2 Coil, Boom Coard, Head Lift/Oscillation Valve,
Auger Motor, Auger Bearing, Seal Guard, Auger Bearing Guard Spring, Vibrator Motor, Vibrator Isolators, Deadman
Switch, Thumb Switch, Rocket Switches & Covers, E-Stop Assembly, Paddle Switch, Hydraulic, Engine Oil & Fuel
Filters, Air Filters, Fan Belt, Stabilizer Catridge, Multi Meter, Ball Joint, Cotter Pin, Keyway
S-10A EMERGENCY SUPPORT KIT
SSR2 Receiver, AS212-S Angle Sensor, AS212-S Cable, SSR2 Coil, Boom Coard, Head Lift/Oscillation Valve,
Auger Motor, Auger Bearing, Auger Seal, Compression Springs, Vibrator Motor, Vibrator Isolators, Emergency
Cord, Cotter Pin, Cotter Pin Loop, Grease Fittings, Split Ring, MP Filter Element, Pressure Gauge, Drive Seal, In-
ner Tube, Deadman Switch, E-stop Assembly, Paddle Joystick, Spark Plug, Rocker Switches and Covers, Relays,
Timed Lower Thuumb Switch, Pin assemblies, Multimetre, Hydraulic Hoses
S-940 EMERGENCY SUPPORT KIT
SSR2 Receiver, AS212-S Angle Sensor, AS212-S Cable, SSR2 Coil, Boom Coard, Head Lift/Oscillation Valve,
Auger Motor, Auger Bearing, Auger Seal, Compression Springs, Vibrator Motor, Vibrator Isolators, Emergency
Cord, Cotter Pin, Cotter Pin Loop, Grease Fittings, Split Ring, MP Filter Element, Pressure Gauge, Drive Seal, In-
ner Tube, Deadman Switch, E-stop Assembly, Paddle Joystick, Spark Plug, Rocker Switches and Covers, Relays,
Timed Lower Thuumb Switch, Pin assemblies, Multimetre, Hydraulic Hoses
S-485 EMERGENCY SUPPORT KIT
SSR2 Receiver, AS212-S Angle Sensor, AS212-S Cable, SSR2 Coil, Boom Coard, Head Lift/Oscillation Valve,
Auger Motor, Auger Bearing, Auger Seal, Compression Springs, Vibrator Motor, Vibrator Isolators, Emergency
Cord, Cotter Pin, Cotter Pin Loop, Grease Fittings, Split Ring, MP Filter Element, Pressure Gauge, Drive Seal, In-
ner Tube, Deadman Switch, E-stop Assembly, Paddle Joystick, Spark Plug, Rocker Switches and Covers, Relays,
Timed Lower Thuumb Switch, Pin assemblies, Multimetre, Hydraulic Hoses
COPPERHEAD XD 3.0 EMERGENCY SPARES KIT
SSR Control Box, SSR Receiver, PQ Sensor, Plow Linear Actuator, Limit Switch Assembly, Side Lock Cylinder,
Vibrator Motor, Air Filter Element, MP Filter Element, Spark plug, Vibrator Bearings, Bushing (Lift Arm), Clamp As-
sembly, E-Stop Assembly, Rocker Switches & Covers, Inner Tube, Actuator Cords, Coil Cord to SSR Control Box,
Relays, SSR Clamp, Vibrator Cover Knobs, Rubber Seals Drive Guard, Multimeter, Vibrator Isolators, Operator
Presence Switch.
MINI SCREED C EMERGENCY SPARES KIT
SSR Control Box, SSR Receiver, PQ Sensor, Head Lift Linear Actuator, Plow Linear Actuator, Coil Cord to SSR
Control Box, Vibrator Motor, Vibrator Isolators, Air Filter, Rocker Switches & Covers, Spark Plug, Receiver Pole
Clamp, Rubber Seals Drive Guard, Hex Bit 1/8, Emergency Stop Assembly, Relays, Multimeter.
POWER RAKE EMERGENCY SPARES KIT
SSR Control Box, SSR Receiver, PQ Sensor, Head Lift Linear Actuator, Plow Linear Actuator, Coil Cord to SSR
Control Box, Vibrator Motor, Vibrator Isolators, Air Filter, Rocker Switches & Covers, Spark Plug, Receiver Pole
Clamp, Rubber Seals Drive Guard, Hex Bit 1/8, Emergency Stop Assembly, Relays, Multimeter.
Page
17LEADING PRACTICAL CONCRETE SOLUTIONS
*Hydraulic Powered Winch (Optional)
The Allen® Razorback® Truss Screed is the contractor’s preferred brand when high tolerance FL Numbers are specified on concrete floors and pavements. For more than 35 years, Allen Truss Screeds have set the industry’s standard for precision levelness, rigidity and durability. Allen Engineering has a full line of truss screed models and accessories.
FEATURES:
• Quick Disconnect System
• Low Profile Engine Option
• Wide Range of Horsepower Options
• Hydraulic Powered Winch is Optional
• Manual Winch is Standard
• Bolt-On Replaceable Blades
• Triangular Frame with Vibration Proof Welds
• Eccentric Vibrator Weights
• Replaceable, Greaseable Bearings
• Tough, strong and DurableWith Engine Options ranging from 9 hp to 11 hp, there’s a Steel Screed for virtually Every Size
Floor Finishing or Paving Operation
Accessories & Options Available for the SE12
Air Screed Option Available Bridge Deck Handle Adjustable End Brackets
Pivot Brackets
SE12 RAZORBACK® SERIES STEEL TRUSS SCREED
Invert crown bracket for
air screed shown
Page
18www.anconbeton.com
MAGIC SCREED®
The Magic Screed is a precision engineered, lightweight wet screed for single operator strike-off of concrete. Fast and easy to use, this
high-frequency screed provides uniform distribution over the entire blade length, enhancing structural integrity of the concrete through
consolidation.
Available Width (m)
Weight
(kg)
1.22 3.0
1.83 4.0
2.44 6.0
3.05 7.0
3.66 9.0
4.27 11.0
4.88 12.0
Model HD7070
Engine Honda™ GX35
4-Stroke 35cc
Handles Adjustable
Weight (kg) 13.5
FEATURES:
• Smooth Operating Throttle
• Lightweight, but Powerful Honda™ Engine
• Ergonomically Designed Grips and 360-degree adjustable handles
• Tilt-Up StandaAnti-Vibrating System to focus vibration on the blade, not
the handle
• Quick-Change Screed Blade with unique design
• Carrying Bar for every job movement
Quick-Change Blades Unique, patented blade
Magic Screed® on the job
Handles can be adjusted for height, twisted to the inside or outside and have the angle adjusted for maximum ergonomic support.
Page
19LEADING PRACTICAL CONCRETE SOLUTIONS
TRIPLE ROLLER TUBE PAVERS
Allen Triple Roller Tube Pavers (TRTP) are specifically designed for paving large projects fast, accurately and efficiently. These pavers are not only the best engineered for their tasks, they’re the best value. Allen is so confident in their Paving Equipment that they back them with a One Year, 100% Satisfaction Guarantee! Available in a variety of standard configurations, Allen will also customize their equipment to fit your specific paving projects.
Precision engineered tubes ensure the smoothest pavement possible. Powered by rugged Diesel Engines, with easy to operate
control systems, the Triple Roller Tube Paver can strike off concrete fast. And with Allen’s precision engineered and level-tested roller
tubes, you can be assured of producing the flattest paving job possible.
FEATURES:
• Operational Gang Vibration System for up to 610mm deep
concrete consolidation
• Vibrator Head Diameter: 60 mm
• Vibrator Head Length: 600 mm
• Three Super-Flat Roller Tubes
• Vibrator Spacing: 610mm center to center with radius of effectiveness up to 480mm
• Water Spray System keeps Tubes clean and smooth
• Pendulum Shaft Driven Vibrators can be adjusted from 0-11,000
VPM from operator console
*Shown with Vibration System
255CD on the job
Model 255CD
Engine 32HP Kubota® Diesel (3.7m-6.0m)
44HP Kubota® (6.7m-10.4)
Widths Available
(600mm Increments)
3.6 - 10.4m
Weight at 6.7metre (kg) 2,526
Roller Tube Diameter (mm) 255
Tube Weight Per 300mm (kg) 12
Hydraulic Oil Reservoir (litre) 95.0
Hydraulic Spray System Standard
Hydraulic Steering Leg Standard
Page
20www.anconbeton.com
WORK BRIDGES
Allen Work Bridges are available in several sizes. Allen Work Bridges can be customized for every application. These work bridges
are ideal for joint work, applying curing compounds, bull-floating, applying textures or whenever bridging is required. The Allen Work Bridge is an economical workhorse on any job site.
Non-Powered Model WB1224
Frame Dimension D x W (mm) 300 x 610
Max. Machine Length (m) 20
Available Sections (m) 2.28 / 1.52 / 0.61
Telescopic Sections N/A
Powered Model PWB1824 PWB2434
Engine Honda® GX270 (270cc) Honda® GX270 (270cc)
Frame Dimension D x W (mm) 46 x 61 61 x 86
Max. Machine Width (m) 32.0 36.5
Available Sections (m) 3.66 / 1.83 / 0.91 3.66 / 1.83 / 0.91
Telescopic Sections (m) 4.57 – 7.62 4.57 – 7.62
Paving Wheel Attachment Option
*WB1224 with pneumatic tires
(foam filled tires optional)
Bridge Deck Wheel Attachment Option
Page
21LEADING PRACTICAL CONCRETE SOLUTIONS
HDX600 RIDE-ON TROWEL
Designed to satisfy the most demanding concrete contractors, the Allen HDX600, Hydraulic-Powered Riding Trowel is packed with
the punch of a high-horsepower diesel engine and is the most powerful rider in its class and also one of the most dependable.
With ideal weight to horsepower ratio and hydraulic components (including a patented automatic load sensing device), the HDX600
ensure a peak performance every time.
Model HDX600
Engine 44HP Turbo Charged Kubota Diesel
Dimension - L x W x H (m) 2.76 x 1.28 x 1.42
Panning Path Width (m) 2.54
Rotors Diameter (m) 1.52 (5-Bladed Spider)
Maximum Rotor Speed (rpm) 135
Operating Weight (kg) 732
Fuel Capacity (litre) 41.6
FEATURES:
• Adjustable Seat and Arm Rests
• Generation III (All Hydraulic Proportional) Joy Stick
Power Steering
• Four Lights in Front and Back
• Independent Hydraulic Blade Pitch Controls
44HP Turbo-Charged Kubota Diesel Engine
Hydraulic Joy Stick Power Steering makes maneuverability smooth and easy
HDX600 in operation
*Shown with Allen Steel Pans
Page
22www.anconbeton.com
MSP455 & MSP445
Allen’s MSP series is the most popular series in their ride-on trowel line up. You can now choose between the MSP445 (manual
steer) and the MSP455 (Power Steer). Both models offer a powerful gas engine, Super Heavy-Duty Gearboxes and Spiders to
provide a great weight to-horsepower performer for larger contractors.
The MSP445 and MSP455 are both easy to control and steer. Standard features include an electric-powered spray system and built-
in cup holder.
Both models are powered by the Kohler 40HP gasoline engine and both come with all of the standard features of an Allen ride-on
trowel.
Model MSP455 MSP445
Engine 37HP Kohler Air-Cooled Gasoline 37HP Kohler Air-Cooled Gasoline
Dimension - L x W x H (m) 2.54 x 1.28 x 1.47 2.54 x 1.28 x 1.47
Panning Path Width (m) 2.48 2.48
Rotors Diameter (m) 1.17 (5-Bladed Spider) 1.17 (5-Bladed Spider)
Maximum Rotor Speed (rpm) 165 165
Operating Weight (kg) 533 477
Steering Power Manual
Fuel Capacity (litre) 23.0 23.0
FEATURES:
• Adjustable seat that flips up for easy access• Built-In Cup Holder
• Independent Manual Pitch Control
• Light Switch, Key Switch, Hour Meter and 12 Volt
Charger All in One Location
• Detachable Front Access Panels
• Powered Spray System
• Torque Converter Clutch for True Variable Speed
• Four Lights in Front and Back
• Five-Bladed Spider
• Super Heavy-Duty (SHD) Gearbox
• Hydraulic Joy Stick Power SteeringMSP445 in operation
Page
23LEADING PRACTICAL CONCRETE SOLUTIONS
MP 235 & MP215
The Mechanical-Drive Pro (MP) Series is Allen Engineering’s entry-level rider complete with features found on the larger riders and
the renowned durability of all Allen Equipment. These riders are available in convenient sizes and are equipped with high-horsepower
gasoline engines, heavy-duty drivetrains and packed in easy-to-service frames. Allen’s Standard-Duty Gearboxes and four-bladed
rotors are proven performers in the field.
FEATURES:
• Adjustable seat that flips up for easy access• Built-In Cup Holder
• Independent Manual Pitch Control
• Light Switch, Key Switch, Hour Meter and 12 Volt Charger All in One Location
• Detachable Front Access Panels
• Powered Spray System
• Torque Converter Clutch for True Variable Speed
• Four Lights in Front and Back
• Five-Bladed Spider with Super Heavy-Duty (SHD) Gearbox
• Manual Lever Steering
*Shown with Allen Steel Pans
Model MP235 MP215
Engine 26HP HondaTM GX690 Air-Cooled Gasoline (688cc) 26HP Honda™ GX690 Air-Cooled Gasoline (688cc)
Dimension - L x W x H (m) 2.18 x 0.99 x 1.35 1.98 x 1.04 x 1.35
Panning Path Width (m) 2.16 1.88
Rotors Diameter (m) 0.91 (4-Bladed Spider) 0.91 (4-Bladed Spider)
Maximum Rotor Speed (rpm) 145 145
Application Edging, Finishing and Panning Finishing and Panning
Operating Weight (kg) 355 333
Fuel & Retardant Capacity (litre) 23.0 23.0
Page
24www.anconbeton.com
PRO SERIES WALK BEHIND TROWELS
Engineered for the concrete professional, Allen® Walkers
are designed to produce high tolerance concrete floors (as measured by F-Numbers) with high-quality features that
are hard to find on other trowels.
Allen Pro-Series Walkers feature precision engineered
Allen Gearboxes for long, trouble-free life. They use cast
iron spiders, pressure plates and lift levers for long wear
and continuous service.
Allen precision machines the trowel arms and spiders to
such close tolerances that our trowels don’t need bushings.
And, their high strength steel handle provides maximum
comfort and control and ease of use.
Allen’s commitment to product quality, attention to detail
and 100% product testing ensures that your Allen Walker
will provide years of high performance and trouble-free
operation on the job.
Model PRO 446 PRO 436 PRO EDGER 436
Engine Honda™ GX270 (270cc) or
GX340 (389cc)
Honda™ GX160 (163cc)
or GX270 (270cc)
Honda™ GX160 (163cc) or
GX270 (270cc)
Honda™ GX120 (118cc)
Dimension - L x H (m) 2.26 x 0.99 1.78 x 0.97 2.13 x 0.97 1.65 x 1.09
Rotors Diameter (m) 1.17 (4-Blades) 0.92 (4-Blades) 0.92 (4-Blades) 0.61 (4-Blades)
Maximum Rotor Speed (rpm) 118 118 118 135
Operating Weight (kg) 123 101 89 55
Trowel Arms & Spiders Standard Duty Standard Duty Standard Duty Standard Duty
FEATURES:
• Fingertip Throttle Control
• Padded Handles
• Safety Switch On Handle
• Allen Standard-Duty Gear Box
• Wide Range Of Horsepower Available
• Lifting Hook
• Lifting Bar
• Torque Converter Clutch
• Stabilizer Ring
• Cast Iron Spiders, Pressure Plates And Lift
Levers
• Height Adjustable Handle
PRO446
PRO436
PRO EDGER 436VP424
Page
25LEADING PRACTICAL CONCRETE SOLUTIONS
PANS AND BLADES
Allen Engineering pioneered the use of floating discs (or pans) on riding trowels in 1989 and Allen® Pans remain today the finisher’s choice
when high FF Numbers are specified on a concrete floor. Allen’s flat pan tolerances cut bumps and fill low spots in the concrete floor.
Insist on Allen® Steel Pans for your Allen Riders and Walk-Behinds. Made to the same exacting tolerances as the trowels themselves,
nothing finishes better.
STEEL FLOAT PANS
TROWEL BLADES
TWO TYPES OF PANS
Allen offers both Flat (0” to
1/8” dish) and Mild-Dished
(1/4” to 3/8” dish) steel pans.
This gives contractors even
more pan choices from Al-
len.
Safety Catch Pan Clip-On Pan
MADE INTHE USA
Allen Engineering offers a complete line of finish blades, combination blades and clip-on float shoes for your walk-behind or ride-on
power trowels. We use high quality steel or composite plastic with six high strength rivets to maximize blade life. For the flattest floors,
trust only Allen Finishing Blades. And, Allen Blades fit most other brands of walkers and riders.
Finish Blade Flat Finish Combination Blade Finish Blade
Plastic Silver Blue Gold
Page
26www.anconbeton.com
POWER SPRAYERS
Allen’s powerful, reliable and durable Power Sprayers are the preferred tool
for applying release agents, water-based sealants and curing compounds on
concrete construction sites.
The continuous recirculating system ensures your material is always well mixed
and ready to spray.
Available in barrel, cart, tow or skid mount.
Model 9910 7560XL
Engine Honda™ GX160 (163cc) Honda™ GX120 (118cc)
Maximum Flow Rate (litre/min) 36.0 28.4
Pump Type Diaphragm Roller Ball
Hose Type Hydraulic 3/8”Lock-On
Operating Weight (kg) 61 48
Barrel Mount Configuration is Standard
7560XL Shown *9910 shown with optional Tow Cart*9910 shown with optional Push Cart
FEATURES:
• Spray Gun with Fan Tip 4020 and 30.5 m (100’) of hose is standard on Sprayers.
• Foam Filled Tires optional on all carts.
• All materials must be thoroughly mixed before spraying.
• Sprayers are intended for spraying Form Release Agents, Water Based Concrete
Sealants, and Concrete Curing Compounds.
• Allen Sprayers are not intended for spraying any types of Asphalt Sealants.
Spraying of any type of asphalt sealers will cause damage to the pump and will not
be covered by warranty. *9910 Power Sprayer on the job
Page
27LEADING PRACTICAL CONCRETE SOLUTIONS
ALLEN HANDTOOLS
Checked to exact flatness tolerances, our extruded magnesium Allen Hand Tools are specifically designed to improve floor or pavement levelness. Each tool comes standard with three 1.8 m snap-together aluminum handles. These hand tools are available
with either the Rock-It or Equalizer pitch adjusting head for precise, even control.
Bump Cutter: Cuts down bumps and fills low areas after concrete slab has been floated.
Channel Float: Use in lieu of traditional bull float for flatter floors and pavements.
Check Rod: Reduces bumps and fills low areas while the concrete is still plastic.
*Bump Cutter
*Check Rod
*Channel Float
Mesh Roller: Ideal for embedding exposed aggregate and quickly levels slab and prepared it for final finish.
*Mesh Roller
Model Tool Widths (m) Channel/Beam
Dimension
Channel Float 1.5 - 3.7 152 mm
Check Rod 2.4 - 4.9 51 x 102 mm
Bump Cutter 2.4 - 4.9 51 x 102 mm
Mesh Roller 0.46 - 1.27
Page
28www.anconbeton.com
MARSHALLTOWN HANDTOOLS
• Broken-in shape eliminates line and ripple
marks right from the start
• Beveled work edges prevent surface
aggregate popping
• PermaShape® guarantees trowel will remain
original broken-in shape
• Sold 1 per inner pack/12 per outer pack,
• 6 per outer pack where noted with *
• Lightweight aluminum construction
• Can be used as a screed, float or check rod
• Dual-edge design, sharp edge for cutting and round edge for
floating concrete
• Attach handle to the bottom side of screed for double the life
• Handle adjusts to desired position for better comfort
• 13745 & 13746 ship LTL
• Sold 1 per inner pack/1 per outer pack
• Lightweight aluminum construction
• Power coated with soft grip end-cap
• Braced for additional strength
• Sold 5 per inner pack/5 per outer pack
• Extruded from very hard, curable, lightweight magnesium
• Most popular float design
• Comfortable handle is positioned to give the tool perfect balance
• Recommended for use with air entrained concrete
• Sold 6 per inner pack/6 per outer pack
PermaShape® Finishing Trowels Beveled End Magnesium Hand Floats
Combo Screed All Aluminum Placer
Size (mm)
305 x 76
305 x 102
356 x 76
356 x 102
356 x 127
406 x 102
406 x 127 *
457 x 107 *
457 x 127 *
508 x 102*
508 x 127*
Size (mm)
406 x 79
508 x 79
Size (mm)
1.8m x 51mm x 41mm
2.4m x 51mm x 41mm
Size (mm)
492 x 102
American Made with
American Materials and Design
BUILT TO LAST!*For sale South East Asia and not in Australia &
New Zealand
Page
29LEADING PRACTICAL CONCRETE SOLUTIONS
REVOLUTION ROTARY SYSTEM ™
Applications:
• Scrub-in penetrating sealers
• Remove residue from stain and dye applications
• Clean-up floors after tilt-up construction• Strip sealers
• Power scrub old concrete clean
• Surface preparation
• Scrub casting beds and forms clean
• Not recommened for electric trowels
Revolution Rotary System Mounts
One Rotary System Mount per trowel arm
DetailsPad Replacement
Revolution Brushes
NOTE: All brushes are 14" and fit both 36" and 46/48" rotary system mounts. One brush per trowel arm
Bristle TypeBrushes/Part #
Comparable to a highproductivity strip pad
.070" nylonimpregnated w/46 gritsilicon carbide
.050” nylonimpregnated w/ 80 gritsilicon carbide
.035” nylonimpregnated w/ 180 gritsilicon carbide
.014" steel wire
Natural Tampico fiber
Ultra-Grit*WRS-14-UG
5.6 lbs.
Nitro-Grit*WRS-14-NG
5.6 lbs.
Virta-Grit*WRS-14-VG
5.5 lbs.
WireWRS-14-WR
6.6 lbs.
TampicoWRS-14-TA
5.6 lbs.
Comparable to a black or brown pad
Comparable to a blue or green pad
• The most aggressive stripping brush• Ideal for heavily soiled concrete surfaces
• An aggressive grit brush• Used for stripping finishes from hard surfaces
• Frequent cleaning of hard surfaces• Flexible for cleaning narrow joints and uneven surfaces
• Most often used on unfinished concrete floor• Variety of uses and economical• Steel wire will rust
• Naturally acid resistant• Soft bristle
When in doubt of scratching, use softer bristle.
*Hydrochloric acid/muriatic acid may soften grit and nylon brushes
WARNING: Do not use Wagman Rotary System with flammable materials.
.060” PolyMondo Poly*WRS-14-MP
5.2 lbs.
Comparable to a black or brown pad
• General scrubbing• Supports weight of rider with no risk of scratching
Apply
Dens
ifier /
Dustp
roofer
(smoo
th su
rface
)
Page
30www.anconbeton.com
MATERIAL SPREADER
Model MS10A MS20
Dimension - L x W x H (m) 0.82 x 0.95 x 0.92 0.95 x
Weight (kg) 47.4 60
Discharge Width (m) 0.8 0.99
Hopper Capacity (kg) 50 100
The Morrison material spreaders are ideal for all types of after-pour applications, such as hardeners, colourings, and light reflective coatings. They come in various size and options for your application needs.
FEATURES:
• Available in 0.7m, 1.5m and 3m sections
• Material flow is adjustable from 0.5kg to 14kg per square
metre
• Flow rate control is independent from hopper travel speed
• Hopper height is adjustable from 5cm to 45.7cm over slab
• Bolted construction makes on-site length changes and
adjustments quick and easy using everyday tools
• Metered flow valve assures precise applications of expensive
toppings
• Capable of spanning slabs from 3metres to 23metres
OPTIONS:
• Wheeled end section with 2 or 4 wheels per end
• Trap rock discharge adaptors
• Calibration pan 0.45kg weight for 0.3m2
Model MS20
Engine GX160 Gasoline Engine (5.5hp)
Capacity (litre) 127
Maximum Load (kg) 227
Discharge Width (cm) 122
Hopper Weight (kg) 175
Section Weight (kg) 0.7m: 8 1.5m: 14.5 3.0m: 28Wheel Assembly Weight (kg) 123
Maximum Span (m) 23
MS40C
MS10A
FEATURES:
• The hopper can takes 50kg (MS10A)
and 100kg (MS20) of material
• Able to control rate of discharge
• Foldable handle for ease of
transportation and storage
• Wheels drive hopper blades
• Exact material measurement per
square metre saves material cost and
meets job specification.
MS20
Page
31LEADING PRACTICAL CONCRETE SOLUTIONS
SHOTBLASTERS & SCARIFIERS
SPE12ES & SPE12DC
The SPE has a range of shotblasters that are electrically powered, built for medium to large area shot blasting and developed for
the professional contractor to yield high production rates. Mainly used for preparation of concrete floors but equally effective on steel surfaces.
Model SPE9ES SPE12ES SPE16ES SPE20ES
Dimension - L x W x H (m) 0.80 x 0.34 x 0.84 1.18 x 0.48 x 1.2 1.25 x 0.51 x 1.25 1.51 x 0.59 x 1.45
Voltage (V) 230/400/460 230/400/460 400/460 400/460
Phase Single / Three Three Three Three
Cycles 50 / 60Hz 50 / 60Hz 50 / 60Hz 50 / 60Hz
Working Width (mm) 230mm 305 406 520
Weight 89 (single ph) / 100 ( 3ph) 320 400 852
Dust collection unit - SPE12DC SPE16DC SPE20DC
Dimension - L x W x H (m) Use industrial vacuum 1.73 x 0.8 x 1.6 1.73 x 1.03 x 1.6 1.73 x 1.03 x 1.6
Weight (kg) - 350 400 450
Before and after shotblasting
Model BEF200 BEF320
Dimension - L x W x H (m) 0.94 x 0.34 x 0.91 1.23 x 0.59 x 1.22
Engine type Petrol / Diesel / 230V Petrol / Diesel / 400/460V
Phase Single Three
Cycles - 50 / 60Hz
Working Width (mm) 200 320
Weight 49 - 54 319 - 339
Working Distance from Wall (mm) 45 40
Dimension - L x W x H (m) Use industrial vacuum 1.73 x 1.03 x 1.6
SPE has a wide range of scarifiers to meet the requirement of any job.
APPLICATIONS:-
• Cleaning and texturing concrete and asphalt
• Removal of paint, rust, grease, ice deposits, line markings, and concrete laitance
• Concrete reduction and scabbling
• Grooving applications
• Removal of waterproof membranes from bridge and carpark decks
SHOTBLASTERS
SCARIFIERS
Page
32www.anconbeton.com
PLANETARY GRINDERS & EDGE GRINDER
DFG280 - EDGE GRINDERS
DFG280
FEATURES:
• NEW Floating head design
• 10” Grinding Head
• Folding Handle, with multiple settings for
height adjustment
• Built in Lifting Handles
• Edge grinding capabilities on BOTH sides
• “Wall Walking” roller bearing for edge
work
Model DFG280
Dimension - L x W x H (m) 1.02 x 0.28 x 0.94
Engine type 230V
Phase Single
Cycles -
Working Width (mm) 200
Weight 44
Head Speed (rpm) 1,400
Motor Speed (rpm) 1,400
Removable Weight (kg)
At Innovatech, our Predator line offloor grinder machines is designed to handle every size job imaginable with power, performance and durability. Our P2400 amd P32N are the ideal choice for light commercial applications to heavy removal of
coatings and laitance, providing just the right touch for all concrete floor grinder needs.
FEATURES:
• Patented 4-head planetary design
• Flexible or rigid cutting heads
• Perfect balance
• Compact design
• Reliability
• Easy height adjustment
• Full assortment of tooling
• Easy on-site maintenance with standard
tools
• Variable speed control
Model P2400 P32N
Dimension - L x W x H (m) 1.25 x 0.5 x 1.17 1.45 x 0.83 x 1.32
Voltage 230V / 400V 400V
Power Output 7.5hp / 10.0hp 15hp
Phase 1 / 3 Phase 3 Phase
Cycles 50/60Hz 50 / 60Hz
Grinding Plate Speed (rpm) 0-300 0-105
Grinding Width (mm) 610 814
Grinding Head Width (mm) 216 270
Water Tank Capacity (litre) 22.7 22.7
Weight (kg) 304 431
PREDATOR PLANETARY GRINDERS
Page
33LEADING PRACTICAL CONCRETE SOLUTIONS
ANCON Equipment Accessories
GL720 Laser Transmitter
(900m Working Diameter)
GL722 Laser Transmitter
(800m Working Diameter)
LL500 Laser Transmitter
(500m Working Diameter)
Tripod for Laser Transmitter
Column Clamp for Laser Transmitter
Standard Motorcycle Tyre/Wheel High Flotation Tyre/Wheel Nylon Lift Harness Chain Link Lift Harness
Auger Kit
Nylon Lift Harness Chain Link Lift Harness Ride-On Trowel Dolly Jacks
SOMERO EQUIPMENT ACCESSORIES
ALLEN ENGINEERING EQUIPMENT ACCESSORIES
Ramps for Large Line Laser Screeds
Power Washer SAE/Metric Tool Kit
Page
34www.anconbeton.com
ANCON Warehouse & Customer Service
ANCON’s warehouse and service center is in Melbourne, Australia.
The Melbourne Warehouse is the main support center for ANCON’s customers in Australia, New Zealand and South East Asia.
ANCON Support Consists of:
• Customer Support via Phone and Email
• On-site Equipment Service and Support
• Spare Parts and Accessories
Melbourne, Australia Allen Stock Melbourne, Australia Somero Stock
Onsite Allen Equipment Service Onsite Somero Equipment Service
MELBOURNE OFFICE /WAREHOUSE
33/111 Lewis Road, Knoxfield, Victoria 3180PO Box 4506, Wantirna South, Victoria 3166
Phone: +61 3 9801 6600
BRISBANE OFFICE Unit 1 / 35 Manton Street
Morningside, QLD Australia 4170
ADELAIDE OFFICEUnit 3, Level 1, 66 Rundle StreetKent Town, South Australia 5067
PO Box 421, Glenside, South Australia 5065Phone: +61 8 8362 4540