Aurora Appendix Product Reference

8/11/2019 Aurora Appendix Product Reference

1/23

APPENDIX

PRODUCT REFERENCES


2/23

HK AURORA/PSY LIGHTING

SPECIFICATION

Company Name

Product Name 75W

Part No 075-H

For customer fill

Confirmed department

Confirmed result

Signature

Approve)

Auditing)

Make)


3/23

Features :

1. Astheworld'sfirstnewproducts,LEDbigbulbcoulddisplacethecompactTraditionalCFLlight.

2. Uniquestructure,wideangled(360),WiderangeofIrradiatedArea.

3. Smartheatdispersionstructure(patentdesign).

4. Offerthewellmixedfacular,withouttheshadowresult,longoperatinglifeandlowlumensdepreciation.

5. Variouslampholderareavailable,awiderangeofapplications.(E39/E40,E26/E27)

6. WidevoltageAC85265V.

7. UsingFansforbettercooling

8. UsingFanprotectioncircuit,whenfanscouldnotwork,thepowerofwholelampwillbereduced50%to

ensurethesafetyofthelamps.

9. MeettheCEstandard

Product Appearance :

Dimensions


4/23

MAIN SPECIFICATIONS t=20)

PSY/AURORA-CORN LIGHT-075H

5730

7500LM

COLD WHITE, NATUAL ,WARM WHITE

>72

CIRCLE

35000

AC 85 265

50/60 Hz

346

752W

0.95


5/23

Research Report:


6/23

Fixing Ways:

UP OR DOWNSIDE

CORRECT WRONG

Packing

15

L W H Kg

Inner Box

120mm 120mm 340mm 1.0

Outer Box

615mm 255mm 360mm 11

2*510PCS


7/23

Applications :

BOTH INDOOR AND OUTDOOR WITH FULL PROTECTION


8/23

Issued November 2009 12498

DATA SHEET

C60 & C120

MCB

Based on Schneider Electric Catalogue


9/23

Protection

Circuit Breaker Limitation Capability

The limitation capability of a circuit breaker is that characteristic wherebyonly a current less than the prospective fault current is allowed to flow undershort-circuit conditions.

This is illustrated by limitation curves which give:

" The limited peak current in relation to the

RMS value of the prospective short-circuitcurrent (the short-circuit current being thatcurrent which would flow continuously in theabsence of protection equipment).

" The limited current stress in relation to theRMS value of the prospective short-circuitcurrent.

" Current limiting capability. The advanceddesign of the Multi-9 range provides currentlimitation with far better protection than con-ventional circuit breakers. For example, on a

6A rating with a prospective short circuit of5000A, the current will be limited at 350A or7%.

Installation of current limiting circuit breakersoffers several advantages:

# Better network protectionCurrent limiting circuit breakers considerablyreduce the undesirable effects of short-circuitcurrents in an installation.

# Reduced thermal effectsCable heating is reduced, hence longer cablelife.

# Reduced mechanical effectsElectrodynamic forces reduced, thus electri-cal contacts are less likely to be deformed orbroken.

# Reduced electromagnetic effectsMeasuring equipment situated near an elec-

trical circuit less affected.

Trip Unit Variations Circuit Breaker Marking

Curve Btripping:3 to 5 times the ratedcurrent (In);protection of generators,

persons, very longcables.

Curve Ctripping:5 to 10 In;protection of circuits,

general applications.

Curve Dtripping:

10 to 14 In;protection of high surgecircuits, welders, trans-formers, motors.

Curve MA(magnetic only)tripping: 12 In;protection of motor

starters (+ thermal pro-

tection when combinedwith contactor).

Circuit Protection

A choice of several curvesWhatever circuit has to be pro-tected, a C60 or C120 circuit

breaker provides the perfectsolution with a suitable curve.

1. Circuit Breaker Model Number

2. Tripping Curve

3. Circuit Breaker Current Rating

4. Operating Voltage

5. Rated Breaking Capacity

6. Circuit Breaker Part Number

7. Electrical Diagram - No. of Poles

8. I2t classification

Merlin Gerin Multi 9 SystemMiniature circuit breakersTripping curvesMarkings & limitation capability

1

2

3

4

5

8

C60H

C63415V~10000

3

2 ....

1

2

3

4

5

6

6 7

multi 9

1249


10/23

protection

circuit-breakers up to 63 A

C60a circuit-breakers4.5 kA, C curveAS/NZS 4898 Approval No: N13634

functions

description technical dataC60a circuit-breakers

c power circuitv voltage rating: 240 V ACv number of cycles (O-C): 10 000v foolproof terminal design- moving barrier prevents incorrect cableinsertion- cable strand centering guides ensure

correct cable positions and strand groupingv isolation with positive contact indicationv bistable din clip, simplifies disassembly

c environmentv tropicalisation: treatment 2(relative humidity: 95 % at 55 C)v connection: tunnel terminals for thefollowing cables:- up to 25A : 25mm2stranded- 32 to 63A : 35mm2stranded

The circuit-breakers combine the followingfunctions:- protection of circuits against short-circuitcurrents,

- protection of circuits against overloadcurrents,- control,

- protection of persons against indirectcontact.

- C60a circuit-breakers are used in the

domestic sectors where single phase faultlevels are less than or equal to 4.5kA.

C curve

utilisationcables feeding conventional loads.

technical data

cpower circuitv tripping curves: the magnetic trip unitoperates between 5 and 10 In

v breaking capacity- according to AS/NZS 4898 Icu ultimatebreaking capacity (0-C0 cycle):

type rating catalogue width quantity

(A) number in mod. per box

of 9 mm

C curve C60a

1P 6 11354 2 1210 11355 2 1216 11356 2 12

20 11357 2 1225 11339 2 12

32 11358 2 12

40 11359 2 1250 11360 2 12

63 11361 2 12

1

2

catalogue numbers

11357

- isolation,

rating voltage breaking

(A) (V) capacity

Icu (A)

1...63 240 4500

1249


11/23

protection


C60N circuit-breakers6kA, C curveAS/NZS 4898 Approval No: N13634

functions

description technical data common toC60N circuit breakers

c power circuitv voltage rating: 240/415 V AC- for 2P single phase 240/480VvI2t classification: 3v number of cycles (O-C): 20 000v foolproof terminal design- moving barrier prevents incorrect cableinsertion- cable strand centering guides ensure

correct cable positions and strand groupingv isolation with positive contact indicationv bistable din clip, simplifies disassembly

c environmentv tropicalisation: treatment 2(relative humidity: 95 % at 55 C)v connection: tunnel terminals for thefollowing cables:- up to 25A : 16mm2flexible with cable end

: 25mm2stranded- 32 to 63A : 25mm2flexible with cable end

: 35mm2stranded

C curve


technical data

cpower circuitv tripping curves: the magnetic trip unitsoperate between 5 and 10 Inv breaking capacity according toAS/NZS 4898, Icu ultimate breaking capacity

(O-CO cycle):

rating type voltage breaking

capacity(A) (V) Icu (A)

163 1P 240/415 6 0002P 415...480 6 0003P 415 6 000

The circuit-breakers combine the followingfunctions:- protection of circuits against short-circuitcurrents,


- isolation,- protection of persons against indirectcontact.

catalogue numbers type rating catalogue(A) number

C curve C60N

1P 1 25797

2 25798

4 25800

6 25801

10 25802

16 25803

20 25804

25 25805

32 25806

40 25807

50 25808

63 25809

2P 1 25811

2 25812

4 25814

6 2581510 25816

16 25817

20 25818

25 25819

32 25820

40 25821

50 25822

63 25823

3P 1 258252 25826

4 25828

6 25829

10 25830

16 25831

20 2583225 25833

32 25834

40 25835

1

2

3

4

5

6

25804

1

2

1

2

3

4

25818

Width in mod

of 9mm - 2

Width in modof 9mm - 4


1249


12/23

protection

circuit breakers up to 125A

C120N circuit-breakers10kA, B, C curves - AS/NZS 489810kA, D curve AS 3947-2

function The circuit-breakers combine the followingfunctions:- protection of circuits against short circuitcurrents,


Technical data common to C120N circuitbreakers

c power circuitv current rating: 63 to 125 Av voltage rating 415 V ACvinsulation voltage Ui: 500 Vvimpulse withstand voltage Uimp: 6 kVv breaking capacity:- according to AS/NZS 4898 Icv ultimate

breaking capacity (O-CO cycle)type voltage breaking cap.

(V) Icu (A)1, 2, 3, 4P 240/415 10000

vaccording to AS3947-2 Icu ultimatebreaking capacity (O-CO cycle)

type voltage breaking cap.(V) Icu (kA)

1P 240 10

415 32, 3, 4P 400415 10

v mechanical durability:- 20000 cycles (O-C)v electrical durability:

- 63 A: 10000 cycles (O-C)- 80125 A: 5000 cycles (O-C)v I2t classification: 3v isolation with positive contact indication:opening is indicated by a green strip on thedevice operating handle. This indicatorshows opening of all the polesv foolproof terminal design- moving barrier prevents incorrect cableinsertion- cable strand centering guides ensurecorrect cable positions and strand groupingv bistable din clip: simplifies disassemblyv 63 to 125A: - up to 35mm2 flexible with

cable end- up to 50mm2 stranded

description

- isolation,- protection of persons against indirectcontact.

B curve

utilisationwhen there are small inrush currents(generators, long cables).

technical data

c power circuitvtripping curve:

the magnetic trip units operate between3 and 5 In.

C curve


technical data

c power circuitvtripping curve:the magnetic trip units operate between 5and 10 In.

D curve - For industrial use only

utilisationloads with a high inrush current(motors, transformers).

technical data

c power circuitv tripping curve:the magnetic trip units operate between10 and 14 In.

Approval No:Q00542

Approval No:Q00542

1249


13/23

protection


C120N circuit-breakers10kA, B, C curves - AS/NZS 489810kA, D curve AS 3947-2

18340

18344

1

2

31

42

catalogue numbers

18349

18355

531

642

7531

8642

type rating B C D

(A) Curve Curve Curve

B curve C120N

1P 63 18340 18356 18378

80 18341 18357 18379

100 18342 18358 18380

125 18343 18359 18381

2P 63 18344 18360 18382

80 18345 18361 18383

100 18346 18362 18384

125 18347 18363 18385

3P 63 18348 18364 18386

80 18349 18365 18387

100 18350 18367 18388

125 18351 18369 18389

4P 63 18352 18371 18390

80 18353 18372 18391

100 18354 18374 18392

1 25 18355 18377 18393

Width in mod

of 9mm - 3

Width in mod

of 9mm - 6

Width in mod

of 9mm - 9


1249


14/23

Dimensions

C60a/N/H circuit breakers Vigi C60

C120N/H circuit breakers

C60/C120 auxiliaries

Vigi C120

27

54

81

81 45

44

73

16

5.5 5.5

6.5

7

34

7max3

max

21.2

84.3

108

2P

1P

3P

4P

OFF OFF OFF OFF

108

2P 2P

3P 3-4P

4P

81 90

87

18

45

44

6354

95

73

16

5.5

OFF OFF OFF OFF

9 9 18 36

81 45

1644

5.5 73

81 45

1644

5.5 73

OF+SD/

OF

OF+SD/OFOF, SD

OF, S

MX

MN

MN s

36

81OFF

12

81OFF OFF OFF OFF

12

20

81OFF OFF

C60 accessories

C120 accessories

1249


15/23

Product data sheetCharacteristics

A9R11463iID 4P 63A 30mA AC-type

Main

Range of product IID

Device short name IID

Poles description 4P

Neutral position Left

Network type AC

Complementary

Device location in system Outgoer

[In] rated current 63 A

Network frequency 50/60 Hz

[Ue] rated operational voltage 400 V EN 61008-1 AC 50/60 Hz

400/415 V IEC 61008-1 AC 50/60 Hz

Residual current tripping technology Voltage independent

Earth-leakage sensitivity 30 mA

Earth-leakage protection time delay Instantaneous

Earth-leakage protection class Class AC

Rated breaking and making capacity 1500 A Idm1500 A Im

Rated conditional short-circuit current 10 kA

Contact position indicator Yes

Control type Toggle

Local signalling Trip indicator

Mounting mode Removable comb busbar installed

Mounting support DIN rail

9 mm pitches 8

Width 72 mm

Connections - terminals Tunnel terminal with flap

Environment

Standards EN 61008-1

IEC 61008-1

RoHS EUR status Compliant

RoHS EUR conformity date 1001


16/23

3RH Contactor Relays

3RH2 contactor relays, 4- and 8-pole

3/58 SIRIUS Innovations Supplement 2011

3

Overview

Contactor relays and coupling relaysSize S00 with accessories

Contactor relay

Coupling relay for auxiliary circuits

Solid-state timing relay block

1-pole auxiliary switch block, cable entry from above

2-pole auxiliary switch block, cable entry from above

1-pole auxiliary switch block, cable entry from below

2-pole auxiliary switch block, cable entry from below

4-pole auxiliary switch block(terminal designations according to EN 50011 or EN 50005)

2-pole auxiliary switch block, solid-state compatible versionTerminal designations according to EN 50005

Solder pin adapter for contactor relays with 4-pole auxiliary switch block

Solder pin adapter for contactor relays and coupling relays

Additional load module for increasing the permissible residual current

Surge suppressor with LED

Surge suppressor without LED

3

4

5

6

7

8

9

10

11

14

12

13

1

2

10

11

11

NSB0_

02058

1

2

3

4

5

6

7

8

9

10

11

12

13

14

Siemens AG 2011


17/23



3/59SIRIUS Innovations Supplement 2011

AC and DC operation

IEC 60947, EN 60947.

The 3RH2 contactor relays have screw, ring lug terminal orspring-type terminals. Four contacts are available in the basicunit.

The 3RH2 contactor relays are suitable for use in any climate.They are finger-safe according to EN 50274. The devices withring lug terminal connection comply with degree of protectionIP20 when fitted with the related terminal cover.

Contact reliability

High contact stability at low voltages and currents, suitable forsolid-state circuits with currents 1 mA at a voltage of 17 V.

Surge suppression

RC elements, varistors, diodes or diode assemblies (combina-tion of a diode and a Zener diode) can be plugged onto all con-tactor relays from the front for damping opening surges in thecoil. The plug-in direction is determined by a coding device.

Note:The OFF-delay of the NO contact and the ON-delay of theNC contact are increased if the contactor coils are attenuatedagainst voltage peaks (noise suppression diode 6 to 10 times;diode assemblies 2 to 6 times, varistor +2 to 5 ms).

Auxiliary switch blocks

The 3RH2 contactor relays can be expanded by up to fourcontacts by the addition of snap-on auxiliary switch blocks.

The auxiliary switch block can easily be snapped onto the frontof the contactors. The auxiliary switch block has a centrally po-sitioned release lever for disassembly.

The contactor relays with 4 contacts according to EN 50011,with the identification number 40E, can be extended with 80E to44E auxiliary switch blocks to obtain contactor relays with8 contacts according to EN 50011. The identification numbers80E to 44E on the auxiliary switch blocks apply to the completecontactors. These auxiliary switch blocks (3RH29 111GA..)

cannot be combined with contactor relays with identificationnumbers 31E and 22E; they are coded.

All contactor relays with 4 contacts according to EN 50011, iden-tification numbers 40E to 22E, can be extended with auxiliaryswitch blocks 40 to 02 to obtain contactor relays with 6 or 8 con-tacts in accordance with EN 50005. The identification numberson the auxiliary switch blocks apply only to the attached auxiliaryswitch blocks.

In addition, fully mounted 3RH22 8-pole contactor relays areavailable; the mounted 4-pole auxiliary switch block in the 2ndtier is not removable. The terminal designations are according toEN 50011.

These versions are built according to special Swiss regulationsSUVA and are distinguished externally by a red labeling plate.

Of the auxiliary contacts (integrated plus mountable) possibleon the device, no more than four NC contacts are permitted.

Order No. scheme

Note:

The Order No. scheme is presented here merely for informationpurposes and for better understanding of the logic behind theorder numbers.

For your orders, please use the order numbers quote in thecatalog in the Selection and ordering data.

Hilfsschtze

DIN EN50 005,

8 oder 6 Kontakte

NSB0_

021

05

Ident. No. 31E, 22EIdent. No. 40E

Ident. No. 80E,

71E, 62E, 53E, 44E

Aux. switch blocks,

EN 50 011,

4 contacts

Ident. No. 40, 31,

22, 20, 11, 02

Aux. switch blocks,

EN 50 005,

4 or 2 contacts

Ident. No. 80E,

71E, 62E, 53E, 44E

Contactor relay,

EN 50 011

8 contacts

Contactor relay,

EN 50 005,

8 or 6 contacts

Contactor relay, EN 50 011,4 contacts

Digit of the Order No. 1st -3rd

4th 5th 6th 7th 8th 9th 10th 11th 12th

13th 14th 15th 16th

@@@ @ @ @ @ @ @ @ @ @ @ @ @ @

SIRIUS contactor relays 3 R H

2nd generation 2

Device type (e. g. 1 = 4-pole contactor relay, 3 = 8-pole contactor relay) @

Number of NO contacts (e. g. 2 = 2 NO) @

Number of NC contacts (e. g. 2 = 2 NC) @

Connection type (1 = screw, 2 = spring, 4 = ring lug) @

Operating range / solenoid coil circuit (e. g. A = AC standard / without) @

Rated control supply voltage (e. g. K6 = 110/120 V, 50/60 Hz ) @ @

No significance @

Special version @ @ @ @

Example 3 R H 2 1 2 2 1 A K 6 0

Siemens AG 2011


18/23



3/60 SIRIUS Innovations Supplement 2011 Illustrations are approximate

3

Selection and ordering data

AC operation

For other voltages see page 3/62.

For accessories see pages 3/93 to 3/97.

1) The 3RH21 contactor relays are also available with ring lug terminal con-nection. Please insert the number "4" into the 8thposition of the part num-ber for versions with ring lug terminal connection.

2) Coil operating rangeat 50 Hz: 0.8 to 1.1 x Usat 60 Hz: 0.85 to 1.1 x Us.

3) For AC-15/AC-14 the following applies: Ie= 6 A for mounted auxiliarycontacts.

Size S00

3RH21 . .-1. . . . 3RH21 . .-2. . . . 3RH22 . .-1. . . . 3RH22 . . -2 . . . .

Rated opera-tional currentat240 V

Contacts Rated control supplyvoltage Usat 50/60 Hz2)

Screw terminals1) Weightapprox.

Spring-typeterminals

Weightapprox.Ident.

No.Version

Order No. Order No.

A NO NC V AC kg kg

For screw and snap-on mounting onto TH 35 standard mounting railTerminal designations according to EN 50011

4 NO, identification number 40E 3 NO + 1 E, identification number 31E 2 NO + 2 NE, identification number 22E

10 40E 4 -- 24 3RH21 40-1AB00 0.220 3RH21 40-2AB00 0.240110/120 3RH21 40-1AK60 0.220 3RH21 40-2AK60 0.240220/240 3RH21 40-1AP60 0.220 3RH21 40-2AP60 0.240

31E 3 1 24 3RH21 31-1AB00 0.220 3RH21 31-2AB00 0.240110/120 3RH21 31-1AK60 0.220 3RH21 31-2AK60 0.240220/240 3RH21 31-1AP60 0.220 3RH21 31-2AP60 0.240

22E 2 2 24 3RH21 22-1AB00 0.220 3RH21 22-2AB00 0.240110/120 3RH21 22-1AK60 0.220 3RH21 22-2AK60 0.240220/240 3RH21 22-1AP60 0.220 3RH21 22-2AP60 0.240

With permanently mounted auxiliary switch block

4 NO + 4 NC, identification number 44E 6 NO + 2 NC, identification number 62E

103) 44E 4 4 110/120 3RH22 44-1AK60 0.270 3RH22 44-2AK60 0.300

62E 6 2 110/120 3RH22 62-1AK60 0.270 3RH22 62-2AK60 0.300

Siemens AG 2011


19/23

YW SeriesControl Units22

Note: Specify a lens color code in place ofin the Type No.

Clear lenses are used for PW (pure white) illumination of pilot lights.

Pilot Lights

Style Illumination Type Operating Voltage Type No. Lens Color Code

FlushFull Voltage Without Lamp 250V AC/DC max. YW1P-1EQ0

A (amber), C (clear),G (green), R (red), S (blue),

W (white), Y (yellow)

LED

6V AC/DC YW1P-1EQ2

A (amber), G (green),PW (pure white), R (red),S (blue), W (white), Y (yellow)

Built-in LED lamp: LSED-

12V AC/DC YW1P-1EQ3

24V AC/DC YW1P-1EQ4

110V AC/DC YW1P-1EQH

230/240V AC/DC YW1P-1EQM3

Incandescent

6V AC/DC YW1P-1EQ5 A (amber), C (clear),G (green), R (red), S (blue),W (white), Y (yellow)

Built-in incandescent lamp: LS-T

12V AC/DC YW1P-1EQ6

24V AC/DC YW1P-1EQ7

Flush

Transformer Type

LED

100/110V AC YW1P-1EH2


Built-in LED lamp: LSED-6

200/220V AC YW1P-1EM2

115/120V AC YW1P-1EH22

230/240V AC YW1P-1EM42

Incandescent

100/110V AC YW1P-1EH5

A (amber), C (clear),G (green), R (red), S (blue),W (white), Y (yellow)

Built-in incandescent lamp: LS-T6

200/220V AC YW1P-1EM5

115/120V AC YW1P-1EH25

230/240V AC YW1P-1EM45

Flush Marking TypeFull Voltage

Without Lamp 250V AC/DC max. YW1P-1BEQ0A (amber), G (green), R (red),S (blue), W (white), Y (yellow)

LED

6V AC/DC YW1P-1BEQ2


Built-in LED lamp:LSED-

12V AC/DC YW1P-1BEQ3


110V AC/DC YW1P-1BEQH

230/240V AC/DC YW1P-1BEQM3

Incandescent

6V AC/DC YW1P-1BEQ5A (amber), G (green), R (red),S (blue), W (white), Y (yellow)




Flush Marking TypeTransformer Type

LED

100/110V AC YW1P-1BEH2A (amber), G (green),PW (pure white), R (red),S (blue), W (white), Y (yellow)

Built-in LED lamp:LSED-6

200/220V AC YW1P-1BEM2

115/120V AC YW1P-1BEH22

230/240V AC YW1P-1BEM42

Incandescent

100/110V AC YW1P-1BEH5

A (amber), G (green), R (red),S (blue), W (white), Y (yellow)


200/220V AC YW1P-1BEM5

115/120V AC YW1P-1BEH25

230/240V AC YW1P-1BEM45


20/23

YW SeriesControl Units 22

Note: Specify a lens color code in place of in the Type No.

Clear lenses are used for PW (pure white) illumination of pilot lights.

Style Illumination Type Operating Voltage Type No. Lens Color Code

ExtendedFull Voltage Without Lamp 250V AC/DC max. YW1P-2TEQ0


LED

6V AC/DC YW1P-2TEQ2



12V AC/DC YW1P-2TEQ3


110V AC/DC YW1P-2TEQH

230/240V AC/DC YW1P-2TEQM3

Incandescent

6V AC/DC YW1P-2TEQ5 A (amber), C (clear),G (green), R (red), S (blue),W (white), Y (yellow)




ExtendedTransformer Type

LED

100/110V AC YW1P-2TEH2



200/220V AC YW1P-2TEM2

115/120V AC YW1P-2TEH22

230/240V AC YW1P-2TEM42

Incandescent

100/110V AC YW1P-2TEH5



200/220V AC YW1P-2TEM5

115/120V AC YW1P-2TEH25

230/240V AC YW1P-2TEM45

DomeFull Voltage Without Lamp 250V AC/DC max. YW1P-2EQ0


LED

6V AC/DC YW1P-2EQ2



12V AC/DC YW1P-2EQ3

24V AC/DC YW1P-2EQ4

110V AC/DC YW1P-2EQH

230/240V AC/DC YW1P-2EQM3

Incandescent

6V AC/DC YW1P-2EQ5 A (amber), C (clear),G (green), R (red), S (blue),W (white), Y (yellow)


12V AC/DC YW1P-2EQ6

24V AC/DC YW1P-2EQ7

DomeTransformer Type

LED

100/110V AC YW1P-2EH2



200/220V AC YW1P-2EM2

115/120V AC YW1P-2EH22

230/240V AC YW1P-2EM42

Incandescent

100/110V AC YW1P-2EH5



200/220V AC YW1P-2EM5

115/120V AC YW1P-2EH25

230/240V AC YW1P-2EM45


21/23

YW SeriesControl Units22

Dimensions (Pilot Lights)

29.8

29.6

24

29.8

29.6

24

63.3 9.5

46.2 9.5

Gasket

Locking RingM3.5 Terminal Screw

Gasket


Panel Thickness 0.8 to 6


29

.8

29.6

24

29.8

29.6

24

63.3 10

46.2 10

Gasket


Gasket




15 5

M3.5 Terminal Screw



29

.8

29.6

24

29

.8

29 6

24

46.2 15.5

Gasket

Locking Ring

Gasket

Locking Ring

M3.5 Terminal Screw



63 3 15 5

Gasket


29

.8

29 6

24

46.2 15.5

Gasket

Locking Ring

29

.8

29.6

24

M3.5 Terminal Screw

Flush

Full Voltage

Transformer Type

Flush Marking Type

Full Voltage

Transformer Type

Extended

Full Voltage

Transformer Type

Dome

Full Voltage

Transformer Type


22/23

Catalog Dimensions in Inches and (mm)

Type Symbol Amps A E F N C D

2.38 .50 .03 .14 1.44 .54HRCI-CB CIF06B 1-30A

(60.40) (12.70) (0.81) (3.50) (35.50) (13.80)

HRCI-CB Industrial Ceramic Body Fuse CIF06Clip-In Mounting

Form No. HRCI-CBPage 1 of 2

Data Sheet: 4128

Bussmann

6-3-04 SB04168

A

C

D E

N F

Catalog Symbol: CIF06B (1 - 30A)

600Vac; 250Vdc

Interrupting Rating: 200,000A RMS Symmetrical

CSA C22.2 NO. 106-M92 (3-30A only)

Industrial miniature fuse with offset blades for clip-in mounting.

Ground ceramic body with plated endcaps.

Provides both short circuit and overload protection.

CIF06 fits the 30A SafeLOC fuseholder.

Dimensional Data


23/23

HRCI-CB Industrial Ceramic Body Fuse CIF06Clip-In Mounting

Bussmann

Time/Current-Curves (Cat. No. CIF06)Peak Let-Through Curves (Cat. No. CIF06)

10,0

00

1,0

00

100

101

1,000

100

10

1

.1

CURRENT IN AMPERES

T

IMEIN

SECONDS

.01

3 6 10

15

2530

AMPERERATING2

0

1

10

100

1,000

10,000

3 610

15

20

25

FUSE RATING (AMPERES)

AMPERE2S

ECONDS(I2t)

100,000

30

Total I2t at 600V

Total I2t at 460V

Pre-Arcing I2t

100

101.1

1,000

100

10

1

PROSPECTIVE CURRENT (SYM. RMS KA)

PEAKCURRENT(KA)

0.1

61015202530

AMPERE

RATING

3

Energy Let-Through Curves (Cat. No. CIF06)

Power Dissipation @ Rated Amps

Catalog No. Watts

1CIF06

3CIF06B 1.8

6CIF06B 1.5

10CIF06B 3.4

15CIF06B 2.4

20CIF06B 3.2

25CIF06B 3.6

30CIF06B 3.6

The only controlled copy of this Data Sheet is the electronic read-only version located on the BussmannNetwork Drive. All other copies of this Data Sheet are by definition uncontrolled.This bulletin is intendedto clearly present comprehensive product data and provide technical information that will help the enduser with design applications. Bussmann reserves the right, without notice, to change design or con-struction of any products and to discontinue or limit distribution of any products. Bussmann alsoreserves the right to change or update, without notice, any technical information contained in thisbulletin. Once a product has been selected, it should be tested by the user in all possible applications.

Documents

Aurora Appendix Product Reference