Upload
others
View
0
Download
0
Embed Size (px)
Citation preview
1
Audio/Visual Rack ASRII series
Made of an aluminum and cast iron hybrid design, this rack maximizes the characteristics of each of these metals.A decade from our �rst AS series, the ASRII series has arrived as a fresh evolution over its predecessor.The rack's lightweight and elegant design was made possible thanks to the lightweight and strength of aluminum, as well as its properties that enable aesthetic �nishes. Various parts of this rack incorporate damping technologies that TAOC has developed over the years to ef�ciently absorb and adjust vibrations inside and outside of the rack. This is a new approach to tone enabled through the marriage of the magni�cence of aluminum and clean resonance of cast iron.
The shelf boards are made of a 5-layer sandwich construction consisting of a newly developed honeycomb core �lled with cast iron powder, high-density woody �berboard, and hard melamine.
● Frame colors come in either Black Metallic or Silver Metallic, and are also available in our new color Pearl Crystal Shine White (by special order). (Poles come in the same color for all frames.)
● Shelf board surfaces are �nished in reversible colors so that you can use both sides of the boards (half-matte).
The fusion of sound and form
Choose di�erent colors depending on the color tones of your equipment.
Color variations
2
● Features of the ASRII series AV Rack● Aluminum die-cast frames and aluminum support poles deliver an aesthetically pleasing form, light weight, and high
levels of rigidity.● The rack ensures high-resolution sound with its hybrid cast-iron/ aluminum construction and damping shelf boards
supported on pin spikes.● Racks come in either Black Metallic or Silver Metallic, and are also available by special order in our new color PW (Pearl
Crystal Shine White).
• Combine additional units with our standard products to suit your needs in terms of how many shelf boards you need and your preferred shelf board spacing.
* Prices remain the same as standard units even if you change pole lengths as long as the number of shelf boards remains the same.
Surface material
Rear face material
Hexagonal space �lledwith cast-iron powderHexagonal space �lledwith cast-iron powder
High-density woody �berboard
High-density woody �berboard
Aluminum die-cast frameCast-iron space
Wiring spaceShelf boards supported by pin spikesThe rear of the frame is designed to facilitate wiring.
The joints between the shelf boards and frame have a spike construction. The height of the spikes can be �nely adjusted.
Aluminum die-cast frame
Cast-iron spacersCast-iron spacers are �tted to the aluminum poles to improve damping performance and sound resolution.
Vibration control sheetTAOC’s proprietary vibration control sheet, which helps reduce frame vibrations, trims frame ringing and improves the S/N ratio.
The use of an aluminum die-cast frame ensures an attractive form and light weight.
The shelf board is new development of �ve layers sandwich structure with the honeycomb core �lled with cast iron powder.
Cast-iron spikes and plates
Speci�cations Finish
● Flame : Aluminum die-cast● Pillar : Aluminum● Shelf board : 5 layers structure board 500W×220H×450D mm
● Cast iron spacer ● Foot : Gradation cast iron
● Flame : Metallic Black (MB) Metallic Silver (MS) Pearl White (PW)
● Pillar: Champaign Gold● Shelf board: Reversible (black or silver), light blue
● Foot: Black
★The racks are easy to assemble using the Allen wrench included.
ASRII-1S-MB/MS● Weight: 10kg ● Load capacity: Up to 100kg
ASRII-1S-MB/MS ● Weight: 10kg ● Load capacity: Up to 100kg<Build-to-order article>
ASRII-3S-MB/MS● Weight: 27kg ● Load capacity: Up to 100kg
ASRII-4S-MB/MS● Weight: 36kg ● Load capacity: Up to 100kg
ASRII-3S-PW● Weight: 27kg ● Load capacity: Up to 100kg<Build-to-order article>
ASRII-5S-MB/MS● Weight: 45kg ● Load capacity: Up to 100kg per shelf Up to 400kg for the entire rack
ASRII-5S-PW● Weight: 45kg ● Load capacity: Up to 100kg per shelf Up to 400kg for the entire rack<Build-to-order article>
ASRII-4S-PW ● Weight: 36kg ● Load capacity: Up to 100kg<Build-to-order article>
ASRII-2S-MB/MS● Weight: 19kg ● Load capacity: Up to 100kg
ASRII-2S-PW ● Weight: 19kg ● Load capacity: Up to 100kg<Build-to-order article>
595516
180
983
230
180
180
Space between poles
350533
Space between poles
559230
180
595516
Space between poles
350533
Space between poles
85
595516
Space between poles
350533
Space between poles
397 280
595516
Space between poles
350533
Space between poles
771
230
180
180
595516
Space between poles
350533
Space between poles
Cast-iron spikes and plates
Casters
Options
CS-120 (set of four)● Load capacity: 120kg per caster● Caster diameter: 60mm (65mm attached)
SP-500 (set of four)● H・20~25mm×35mm diameter● Load capacity: 500kg per spike
Special order units
ASRII-P418 <L:180mm>ASRII-P423 <L:230mm>ASRII-P428 <L:280mm>ASRII-P433 <L:330mm>
ASRII-F418B/S <L:180mm>ASRII-F423B/S <L:230mm>ASRII-F428B/S <L:280mm>ASRII-F433B/S <L:330mm>
ASRII-F418W <L:180mm>ASRII-F423W <L:230mm>ASRII-F428W <L:280mm>ASRII-F433W <L:330mm>
B:Frame color is Metallic BlackS:Frame color is Metallic Silver
W:Frame color is Pearl White Build-to-order article
Pillar length modi�cation kit (set of four Pillars)Pillars are available in lengths of 180, 230, 280 and 330mm.Finish : Champaign Gold
shelf board
Shelf frame, spike pins
Additional unit Description: Shelf frame, shelf board, spike pins, cast-iron spacers and bolts
cast-iron spacers
Pillar
(one shelf)
★ Pillars are available in lengths of 180, 230, 280 and 330mm.
Silver metallic(product numbers with -S)
Pearl White(product numbers with -PW
Build-to-order article)
Black metallic(product numbers with -B)
3 4
MSR-W type
340
340
340
290
290
MSR series
MSMKII series
MSR-S type
MSR-L typeMSMKII-P410/P610 < L : 100mm>
MSMKII-P415/P615 < L : 150mm>
MSMKII-P420/P620 < L : 200mm>
MSMKII-P425/P625 < L : 250mm>
MSMKII-P430/P630 < L : 300mm>
MSMKII-P435/P635 < L : 350mm>
Color
1140
510 510
250
200
595
370
500
MSMKII-SF S Type for the middle<w:600mm> ●Weight: 5kg ●Thickness: 21mm
MSMKII-ST S Type for the top<w:600mm> ●Weight: 5kg ●Thickness: 21mm
MSMKII-LF L Type for the middle<w:1140mm> ●Weight: 5kg ●Thickness: 21mm
600
370
500
250
200
1037
200
200510
600
370
500
250
200
816
200510
600
370
500
250
200
595
510
「ラック基本セット」と「支柱セット」で、ご希望の支柱長のラックを構成できます。
「ラック基本セット」と「支柱セット」で、ご希望の支柱長のラックを構成できます。
MSMKII/MSR series Common option
Audio/Visual Rack MAMKII/MSR seriesGood sound depends on the rack.
TAOC has always produced racks that focus on creating good audio. And now, the MSMKII/MSR series AV racks take TAOC racks to another level. Its design was based on the concept “vibration control” TAOC’s damping technology elevates the performance of AV equipment to higher dimensions and produces beautiful sound with excellent resolution.
● The shelf boards are made of high-density MDF (density: 0.72g/cm3) which delivers excellent rigidity and vibration absorbing properties. With a sliced oak veneer �nish for a natural feel, and an elegantly sculpted form, these racks o�er excellent load capacity of up to 100kg per shelf that is more than su�cient for housing heavy weight amps.
● The black aluminum support poles are �lled with special damping material for improved damping performance.● Its legs come standard with large cast iron spikes.
● Features of the MSMKII series AV Rack
Special damping material.
Speci�cations● Support: Aluminum● Shelf board: High-density MDF (thickness: 21 mm)● Leg: Gradation cast-iron spike (Includes spike receptacle plate.)
Finish● Support: Black metallic● Shelf board: Oak● Leg: Black
Additional units and options
P4XX : for MSMKII-S type (set of four)P6XX : for MSMKII-L type (set of six)
Shelf board ● Finish:Oak Supports ● Finish: Black metallic ● Diameter: 30mm
Casters ● Load capacity: 120kg per caster ● Caster diameter: 60mm (65mm attached)
for MSMKII S type/MSR S type
CS-120 (set of four)
for MSR L type
CS-121 (set of �ve)
for MSR W type
CS-122 (set of eight)
for MSMKII L type
CS-123 (set of six)
Spikes and plates ● For MSR-S type ● Set of four
SP-100● H・25~30mm×35mm diameter
SP-500● Cast-iron● H・20~25mm×35mm diameter● Load capacity: 500 kg per spike
MSMKII-3S ● Weight: 16kg● Load capacity: Up to 100 kg per shelf
MSMKII-4S ● Weight: 21kg● Load capacity: Up to 100 kg per shelf
MSMKII-5S● Weight: 26 kg● Load capacity: Up to 100 kg per shelf Up to 400 kg for the entire rack
MSMKII-3L● Weight: 30 kg● Load capacity: Up to 200 kg per shelf Up to 400 kg for the entire rack
● The shelf boards are made of high-density MDF (density: 0.72 g/cm3), which delivers excellent vibration absorbing properties, and is coated with a special coating with damping characteristics. <See chart>
● The legs are made of gradation cast-iron that have an insulating e�ect.
● It has more than enough load capacity thanks to its unique high-rigidity construction. Load capacity of MSR-3L: 150 kg per shelf, 450 kg in total
● A broad range of size variations are available to accommodate various AV equipment.
● This rack is based on a slim design and made of the �nest materials that match well with the display. The available �nishes are dark gray metallic and dark brown metallic.
200μm 200μm
Regular coating Special coating(contains metal powder)
→ Elapsed time
Vibration damping performance has been improved dramatically thanks to a special coating that contains metal powder.
<Comparison of damping performance>Compared to the damping performance of regular coatings shown in the top chart, you can see that the half-value period of the vibration of the special coating shown in the bottom chart has been reduced to about half, which translates into about twice the vibration damping performance. Regular coating
Special coating containing metal powder
Vibration half-value period *1
Vibration half-value period *1
*1: Measured in impulse vibration tests
MSR series damping technology
● Features of the MSMKII series AV Rack
MSR-5S-DG/DB● Weight: 26 kg● Load capacity: Up to 100 kg per shelf Up to 400 kg for the entire rack
MSR-4S-DG/DB● Weight: 21kg● Load capacity: Up to 100 kg per shelf
MSR-3S-DG/DB ● Weight: 16kg● Load capacity: Up to 100 kg per shelf
Color variations
Dark brown metallic(product numbers with -DB)
Dark gray metallic(product numbers with -DG)
Finish● Support: Black metallic● Shelf board: Dark gray metallic (-DG item number) Dark brown metallic (-DB item number)● Leg: Black
Speci�cations● Support: Aluminum● Shelf board: High-density MDF (thickness: 21 mm)● Leg: Gradation cast-iron
MSR-3L-DG/DB● Weight: 28kg● Load capacity: Up to 150 kg per shelf
MSR-3W-DG/DB● Weight: 39kg● Load capacity: Up to 200 kg per shelf
Additional units and options for MSR series
MSR-LF-DG/DB<w:1200mm> ●Weight: 9kg ●Thickness: 21mm
MSR-P410 <L:100mm>MSR-P415 <L:150mm>MSR-P420 <L:200mm>MSR-P425 <L:250mm>MSR-P430 <L:300mm>MSR-P435 <L:350mm>
MSR-P510 <L:100mm>MSR-P515 <L:150mm>MSR-P520 <L:200mm>MSR-P525 <L:250mm>MSR-P530 <L:300mm>MSR-P535 <L:350mm>
MSR-P810 <L:100mm>MSR-P815 <L:150mm>MSR-P820 <L:200mm>MSR-P825 <L:250mm>MSR-P830 <L:300mm>MSR-P835 <L:350mm>
for MSR-S type ● Set of four
for MSR-S typefor MSR-L type
for MSR-W type
for MSR-L type ● Set of �ve for MSR-W type ● Set of eight
★The racks are easy to assemble using the Allen wrench included.
Shelf board ● Finish:Dark gray metallic(-DG) / Dark brown metallic(-DB)
MSR-SF-DG/DB <w:600mm> ●Weight: 5kg ●Thickness: 21mm
MSR-WF-DG/DB<w:1680mm> ●Weight: 12kg ●Thickness: 21mm
Supports ● Finish: Black metallic ● Diameter: 30mm
10
Speaker Stand
SPB seriesSpeaker BASE
AST series
HST series
EST series
WST series
AST/HST/EST/WST series
9
★組立費別:組立費はお客様が販売店に組立を依頼された場合の実費となります。 販売店にご相談ください。 ★組立は製品に付属している六角レンチで簡単に組み立てることができます。
Speaker stands that actively optimize the beautiful sounds intrinsic to your speakers
The unique vibration damping structure remarkably improves sound transparency.Your audio room will transform into an arena seat for a live performance.
Hybrid cast-iron/aluminum constructionConstructed of lightweight aluminum combined with a cast-iron damper (insulator) that eliminates unwanted vibrations, this hybrid speaker stand fully exploits the characteristics of both materials.Attractive designThese stands have been redesigned in a lightweight and attractive form using aluminum material.Reproduces high-resolution and high-�delity soundThe fusion of aluminum's �air and the pure vibrations ensured by cast-iron create a sharp sound that also has a sense of mildness.
With their hybrid aluminum/cast-iron construction, the AST series speaker stands take maximum advantage of the characteristics of both materials.
Color variations
Silver metallic(product numbers with -S)
Black metallic(product numbers with -B)
Speci�cations common to the AST series● Hybrid aluminum/cast-iron construction● Black metallic and silver metallic �nishes● Spike plates included
★ The stands are easy to assemble using the Allen wrench included.
AST-60HS● Height: 600mm (including spike)● Top board: W・200×D・270mm● Bottom board: W・250×D・300mm● Weight: 11kg
AST-60HB● Height: 600mm (including spike)● Top board: W・200×D・270mm● Bottom board: W・250×D・300mm● Weight: 11kg
● This series of speaker stands is a revival of TAOC's �agship model which was designed for the top-quality compact speakers.
● It represents a marriage between the vibration damping technologies incorporated in the HST series of speaker stands launched in 1995, and our vibration control technologies which we have acquired in the process of developing speaker systems.
● With the introduction of new materials, a new weight distribution, and vibration control design in which we paid close attention to the granularity and volume of the cast iron powder that �lls the support poles, these stands deliver better musicality while retaining the true essence of the audio.
● These stands bring out the intrinsic performance of your speaker systems through a well-balanced mix of vibration damping and vibration-control.
● They follow TAOC's traditional design principle that allows users to �ne tune their audio to their liking and have an extra measure of enjoyment -- for example, users can tune audio quality by re-orienting its support poles.
● Spike plates included
HST-60HB
Audio tuning examples
◎◎◎○
…………
○◎○◎
…………
○○○◎
…………
Legends ◎:Very good ○:Good
A ● Standard: Thicker poles are brought to the front with their corners pointing to the front.
C ● Variation 2:The faces of the support poles and vertical vibrator are parallel to the sides of the top plate.
B ● Variation 1: Thinner poles are brought to the front.
Front
Front
Front
Support poles (thick)
Support poles (thin)
Support poles (thin)
Support poles (thick)
Support poles (thick)
Support poles (thin)
DynamicsClarity
TightnessSoftness
DynamicsClarity
TightnessSoftness
DynamicsClarity
TightnessSoftness
● Height: 610mm (including spike)● Top board: W・200×D・250mm● Bottom board: W・250×D・300mm● Weight: 25kg● Finish: Matte black
● Speaker stands combining the vibration damping technology of the SST series speaker stands released in 1995 and the vibration control technology re�ned during the development of the speaker systems.
● Vibrations are reduced through the dual structure top board (patented technology), cast-iron powder-�lled support pole (patented technology), and four foot spikes.
● The size and speci�c gravity of each particle, as well as the overall volume, of cast-iron powder �lled in the support pole are carefully determined to ensure optimum vibration control.
● The vibration damping and control functions are painstakingly balanced to bring out the best performance of each speaker system.
● The clear and thrilling sounds of small-size speakers stand out on these speaker stands.● Spike plates included
EST-50HL● Height: 500mm (including spike)● Top board: W・174×D・260mm● Bottom board: W・250×D・350mm● Weight: 8.5kg ● Finish: Black metallic
EST-60HL● Height: 600mm (including spike)● Top board: W・174×D・260mm● Bottom board: W・250×D・350mm● Weight: 9.0kg ● Finish: Black metallic
● Best match with the B&W 805 The top and bottom boards have rounded contours that match
the speaker's design. The poles also have an elliptical cross section. The set includes fall-prevention screws.
● Includes insulators These stands include insulators made of gradation cast-iron to
enhance the details and brightness of the sound. Insert them between the speaker and stand according to your preference.
● This stand features the vibration damping technologies including the dual structure top board (patented technology), cast-iron powder-�lled support pole (patented technology), and four foot spikes.
● The size and speci�c gravity of each particle, as well as the overall volume, of the cast-iron powder �lled in the support pole are carefully determined to ensure optimum vibration control.
● The stand e�ectively balances the vibration damping and control functions to e�ciently damp unwanted vibrations with no loss of musical elements, and reveals the clear and thrilling sounds of small-size speakers.
WST-60H● Height: 600mm (including spike)● Top board: 238×317mm ● Bottom board: 258×347mm● Weight: 22kg ● �nishes: Black metallic★ This product does not include spike plates.
WST-C60HB● Height: 600mm (including spike)● Top board: 160×250mm ● Bottom board: 250×350mm● Weight: 11kg ● �nishes: Matte black★ This product does not include spike plates.
PTS-G (set of four) ● H 16mm × 40mm diameter ● 130g per insulator ● Recommended load: 10kg or more/set of four ● Matte black �nish ● With Felt
Options Spike plates made of gradation cast-iron
A trusted staple among audiophiles, these large speaker bases bring out the uniqueness of each speakerMade of high-carbon cast-iron and equipped with unique vertical vibration elements, these highly rigid and heavy speaker bases deliver a high degree of vibration control.They will dramatically improve the sharpness, deepness and clarity of your speakers.
SPB-400DH-B● External dimensions: W・120×H・200×D・400 mm● Weight: 14kg ● set of two
SPB-300DH-B● External dimensions: W・100×H・200×D・300 mm● Weight: 9.2kg ● set of two
SPB-300DL-B● External dimensions: W・100×H・140×D・300 mm● Weight: 8kg ● set of two
Speaker base of free setting
A wide range of sound tuning is available by changing the space between speaker bases. With the wide size range, the speaker base can be used for speakers of various sizes.
Interval size is widesoft sound
Standard setting Interval size is narrowclear sound
7
Audio Board SCB/SUB series
Unique construction realizes better sound quality.
These boards are made of a construction that consists of a honeycomb core �lled with cast iron powder sandwiched in between layers of high-density woody �berboard material, followed by back and front surface material.These heavy-weight boards provide high rigidity, large speci�c gravity, and excellent damping performance that all work together to counter the softness of your �oor.
● New and unique 5-layer construction consisting of a honeycomb core �lled with cast iron powder is a powerful deterrent to �oor resonance.
● Users can choose between the W type that uses natural oak on its surface and delivers a soft sound, and the C type that delivers a cool, harder sound.
● Both the feel of natural wood and the subdued color tones of dark oak, as well as the cool and stylish feel of Clear Black perfectly complement your audio equipment.
High-grade products with features to improve sound quality and a style that will match your interior furnishings
SCB-CS-HC series
41m
m
40m
m
W TypeC Type
470mm
Upper surface : 450mm
Upp
er s
urfa
ce :
350m
m
400m
m
520mm
Upper surface : 500mm
Up
per
sur
face
: 44
0mm
490m
m
670mm
Upper surface : 650mm
Up
per
sur
face
: 59
0mm
640m
m
SCB-CS-HC45CSCB-CS-HC45W
SCB-CS-HC50CSCB-CS-HC50W
SCB-CS-HC65CSCB-CS-HC65W
● New sandwich construction consists of a honeycomb core �lled with cast iron powder sandwiched in between layers of high-density woody �berboard material, followed by back and front surface material.
● Its high-density MDF (density: 0.72g/cm3), which provides excellent vibration absorption performance, dramatically enhances the density of your sound.
● Di�erent combinations of material thicknesses have di�erent e�ects on the quality of your sound. Please choose the right combination for the sound you are looking for.
SCB-RS-HC series
SUB series
SCB series
495mm
Upper surface :477mm
445
mm
Up
per
sur
face
:427
mm
26mm
52m
m
500mm
450mm
650mm
600mm
350mm
450mm 22mm
8
Unique damping construction dramatically improves sound clarity.When a rack is placed on a carpet or tatami mats, the sound loses its instantaneous force, much like the way we lose traction on loose or soft ground. On a wooden �oor, however, the transmitted sound makes the �oor resonate, robbing the music of its pleasant vibrations. These boards are a result of TAOC's vibration research.Our Sound Creation Boards will raise your listening environment to the next level.
Perfect your setup with Sound Creation Boards and take your audio room to a higher dimension.
● Features of the SCB/SUB series
Surface material
Rear face material
Hexagonal space �lledwith cast-iron powderHexagonal space �lledwith cast-iron powder
High-density woody �berboard
High-density woody �berboard
Performs well in a wide range of applications.When used in a traditional Japanese-style room, the Sound Creation Board will improve the sharpness and volume of the lows and enhance the clarity of sound in the mid to high ranges. This product dramatically enhances sound location and presence. The bene�ts are the same in a Western-style room with carpet. In rooms with wooden �oors, it reinforces the �oor and controls the �oor's resonance to signi�cantly reduce muddiness.
Size variations allow a wide range of setups.An assortment of size variations is available to support di�erent sizes of equipment and a wide range of listening positions. Choose the right product for your setup.
● New 7-layer construction consists of a honeycomb core �lled with cast iron powder sandwiched in between layers of high-density woody �berboard material, followed by back and front surface material.
● High-density MDF material(density: 0.72 g/cm3) known for its excellent damping characteristics is used for an impressive improvement in sound density.
● These boards are coated with seven layers of special coating that contains metal powder, for a dramatic improvement in vibration attenuation.
● Optional spike and plate (HT-SP4) and spikes (RS-500) are available.
This is a high-end model that employs all of TAOC's damping technologies
200μm 200μm
Regular coating Special coating(contains metal powder)
SP-100 (set of four) ● H・25~30mm×35mm diameter
Spikes and plates SpikesRS-500 (set of four)● Cast-iron ● H・45~50mm×35mm diameter● Load capacity: 500 kg per spike
Options
Special coating containingmetal particles
Special coating containingmetal particles
SCB-RS-HC45G (Pair set)● Weight : 7.0kg per board
SCB-CS-HC45C (Pair set)● Weight : 6.0kg per board
SCB-CS-HC50C● Weight : 9.0kg per board
SCB-CS-HC45W (Pair set)● Weight : 6.0kg per board
SCB-CS-HC50W● Weight : 9.0kg per board
SCB-CS-HC65C● Weight : 16.0kg per board
SCB-CS-HC65W● Weight : 16.0kg per board
SCB-RS-HC50G● Weight : 10.0kg per board
SCB-RS-HC65G● Weight : 17.0kg per board
High density woody �berboard
High density woody �berboard
Cast iron honeycomb core
High density woody �berboard
High density woody �berboard
Cast iron honeycomb core
Phenol laminated plate
Melamine board
High density woody �berboard
High density woody �berboard
High density woody �berboard
High density woody �berboard
Cast iron honeycomb core
Phenol laminated plate
Color: Clear Black Color: Wood
* e�ective size (450×350mm)
* e�ective size (500×440mm)
* e�ective size (427×477mm)
* e�ective size (650×590mm)
High density woody �berboard
High density woody �berboardCast iron honeycomb core
Phenol laminated plate
High density woody �berboard
High density woody �berboardCast iron honeycomb core
Phenol laminated plate
Melamine board Natural oak
2 types available to sound quality demand
Sharp and Solid sound SUB-HC50C● Weight : 5kg ● Color : Glossy Black
Sharp and Solid sound SUB-HC50C● Weight : 5kg ● Color : Glossy Black
Warm and mellow soundSUB-HC50W● Weight:6kg ● Color : Warm Yellow
Warm and mellow soundSUB-HC50W● Weight:6kg ● Color : Warm Yellow
Medium-density �berboard
Medium-density �berboard
TAOC insulators use three types of material: ‘‘High-carbon cast-iron’’, ‘‘gradation cast-iron’’, and ‘‘Advanced High-carbon cast-iron’’, a new material developed by TAOC. Recognized for their superior damping performance and stability, TAOC high-carbon and gradation cast-iron products are used in high-end CD players, DVD players and ampli�ers produced by audio manufacturers. Our new material ‘‘Advanced High-carbon cast-iron’’ takes performance a step further.Try these products to upgrade your audio system or to tune it to your exact preference. Your sound will come more alive.
10
InsulatorInsulators that maximize your audio equipment's performance
Improves all sound rangesThis is a revolutionary insulator that is e�ective in improving the entire audio range from bass to treble. A spike made of high-carbon cast-iron, which is known for its ability to enhance clear and powerful sound, and a spike plate made of “Advanced High-carbon cast-iron”, a new material developed by TAOC, are combined in a pin con�guration. This adds subtlety and brilliance to clear and powerful sound for improved audio quality across all ranges.
<Advanced High-carbon cast-iron>We have evolved the high-carbon cast-iron material using our unique, patented fabrication technique. This new material by TAOC retains its excellent damping performance while achieving a hardness that exceeds all other materials.Advanced High-carbon cast-iron material was evolved, using our unique, patented fabrication technique.
Super Insulator Hybrid InsulatorHybrid InsulatorThis is a hybrid insulator made of molded maple, a new material that gives richness to the sound, and high-carbon cast-iron, which enhances the freshness of the sound.
<Molded maple> This is a new, 100% wooden material for audio applications.Our special process for blending, into a single piece, hard maple (speci�c gravity: 0.70g/cm3) which is a heavy and hard material that improves the high and mid ranges, with Japanese ash (speci�c gravity: 0.68g/cm3) which is a resilient material that improves the low and mid ranges. The resulting material enhances audio quality over all ranges, something that is not possible using only one type of material. The blended material is then compressed under high pressure to increase its speci�c gravity to 1.40 (g/cm3) to give a sense of density to the sound.
Place the spike on the bottom for better seating and stability.
Place the spike on the top for a more brilliant and clear sound.
Examples
Using your pin and plate insulators
Best insulator to use as legs for players and ampli�ersWith a combination of high-carbon cast-iron and a special felt material, this insulator gives more power to your sound. Replace this with the standard insulator on your audio equipment for a clearer and more powerful sound.
High-carbon cast-iron insulators
Pin and plate insulators
Spike plates
Insulator for a broad range of usesTry this Gradation cast-iron insulator not only for speakers, but also for ampli�ers and players to add brightness to the sound of your system.
Insulator for small-size speakersThis is a smaller version of the insulator used in the TAOC speaker system "FC3100" and was reduced to the optimal size for small-size speakers. It comes with high-quality felt material that users can attach to suit their sound tastes. Use these small-size insulators not only for speakers, but also to "damp and control vibrations" on a broad range of audio and video equipment.
Gradation cast-iron insulators
Cast-iron's superb damping characteristics and the pin-point supports vibration-shielding e�ects have been perfectly matched. In particular, these products clear up fogginess in the mid to low ranges to create a sound with an excellent sense of depth.
Made of gradation cast-iron, these plates are e�ective in reducing and controlling vibrations.
Lay these under spikes to prevent damage to your �oor.
TITE-35S
High-carbon cast-iron insulator
Gradation cast-iron insulator
Improved treble range
TITE-35S (for a set of four pairs)● H・29 mm×50mm diameter● Weight : 355 g per pair● Recommended load: 10kg or more/set of four pairs● Spike: High-carbon cast-iron● Spike plate: Advanced High-carbon cast-iron● Urban gray �nish
PTS-A (set of four)● H・12 mm×50mm diameter● Weight : 155 g per insulator● Recommended load: 10kg or more/set of four● Advanced High-carbon cast-iron● Urban gray �nish
Pin-plate insulators
Spike plate
Feet for your ampli�er or player
Speaker base
TITE-46GP (set of three)● H・45mm×60mm diameter● Plate : H・5mm×35mm diameter● Weight : 800g per insulator● Recommended load: 20kg or more/set of three● Urban gray �nish
TITE-25GP (set of three)● H・25mm×50mm diameter● Plate : H・5mm×35mm diameter● Weight : 250g per insulator● Recommended load: 10kg or more/set of three● Urban gray �nish
TITE-25MF (set of four)● H・25 mm×50mm diameter● Weight : 250g per insulator● Recommended load: 10kg or more/set of four● Wooden portion: Molded maple with black �nish● cast-iron portion: High-carbon cast-iron with urban gray �nish
TITE-25GS (set of eight)● H・20mm×50mm diameter● Weight:250g per insulator● Recommended load: 10kg or more/set of four● Matte black �nish
TITE-13GS (set of eight)● H・10mm×25mm diameter● Weight:250g per insulator● Recommended load: 5-15kg/set of four● Matte black �nish ● Felt attachment
PTS-G (set of four)● H・16mm×40mm diameter● Weight: 130g per insulator● Recommended load: 10kg or more/set of four● Matte black �nish ● With felt
PTS-N (set of four)● H・5mm×35mm diameter● Weight: 35g per insulator● Recommended load: 5kg or more/set of four● Stainless steel
TITE-25WF (set of four)● H・22mm×50mm diameter● Weight:250g per insulator● Recommended load: 10kg or more/set of four● Matte black �nish ● With felt
TITE series
9