16
BUILDING LEASED & MUST BE VACATED BY JULY 31 • CONTENTS MUST BE SOLD (200+) CNC & Manual Large Capacity Machine Tools, (35+) Major Items of Fabricating Equip., (30+) Grinders, Furnaces, Q.C., (25+) Rotary Tables, Pallets of Tooling, (50+) Chucks up to 92" dia., Overhead Cranes, Hyd. Cranes, Forklifts to 30,000-Lb. & More Read Partial Terms and Conditions on Back Page of Brochure < MESTA 60" X 288" TRAVELING WHEEL TYPE ROLL GRINDER 86" BULLARD DYNATROL HI-COLUMN VERTICAL BORING MILL 5-1/8" WOTAN MDL. B130L TABLE TYPE HORIZONTAL BORING MILL > 6' X 1-1/8" BERTSCH MDL. 14 INITIAL PINCH PLATE BENDING ROLL AUCTION On-Site Bidding in Houston, Texas or Bid Via Webcast at Headquarters: 2901 W. Sam Houston Pkwy. N., Suite A-130 Houston, TX 77043 FAX: (713) 672-7905 PHONE: (713) 691-4401 E-MAIL: [email protected] WEBSITE: www.pmi-auction.com Ron Moore, Texas Lic. #7314 HOUSTON • DALLAS • ST. LOUIS Sale Conducted By: 132" UNDER RAIL AUCTION: WEDNESDAY MAY 21 9:30 A.M. INSPECTION Tuesday, May 20 9:00 A.M. to 4:00 P.M. & Morning of Sale BUYER’S PREMIUM: 15% ONSITE 18% WEBCAST TREMENDOUS OFFERING OF CHIP MAKING & FABRICATING MACHINE TOOLS, PRECISION ACCESSORIES & TOOLING At the Premises 14309 Sommermeyer St., HOUSTON, TEXAS 77041 (See Directions on Back Page) NO CHARGE FOR RIGGING MACHINERY ONTO CUSTOMER SUPPLIED TRUCKS

AUCTION - Plant & Machinery Inc.pmi.vihn.net/auction/Files/3_42130_May 21_2014 Final.pdf · 2014-11-23 · E-MAIL: [email protected] WEBSITE: Ron Moore, Texas Lic. #7314 HOUSTON

  • Upload
    others

  • View
    2

  • Download
    0

Embed Size (px)

Citation preview

BUILDING LEASED & MUST BE VACATED BY JULY 31 • CONTENTS MUST BE SOLD(200+) CNC & Manual Large Capacity Machine Tools, (35+) Major Items of Fabricating Equip., (30+) Grinders, Furnaces, Q.C., (25+) Rotary

Tables, Pallets of Tooling, (50+) Chucks up to 92" dia., Overhead Cranes, Hyd. Cranes, Forklifts to 30,000-Lb. & More

Read Partial Terms and

Conditions on Back Page of

Brochure

<MESTA 60" X 288" TRAVELING WHEEL TYPE ROLL GRINDER

86" BULLARD DYNATROL HI-COLUMN VERTICAL BORING MILL

5-1/8" WOTAN MDL. B130L TABLE TYPE HORIZONTAL BORING MILL

>6' X 1-1/8" BERTSCH

MDL. 14 INITIAL PINCH PLATE

BENDING ROLL

AUCTION

On-Site Bidding in Houston, Texas or Bid Via Webcast at

Headquarters:2901 W. Sam Houston Pkwy. N., Suite A-130

Houston, TX 77043

FAX: (713) 672-7905PHONE: (713) 691-4401

E-MAIL: [email protected]: www.pmi-auction.com

Ron Moore, Texas Lic. #7314

HOUSTON • DALLAS • ST. LOUIS

Sale Conducted By:

132" UNDER RAIL

AUCTION: WEDNESDAY

MAY 21 9:30 A.M.

INSPECTION Tuesday, May 20

9:00 A.M. to 4:00 P.M. & Morning of Sale

BUYER’S PREMIUM: 15% ONSITE

18% WEBCAST

TREMENDOUS OFFERING OF CHIP MAKING & FABRICATING MACHINE TOOLS,

PRECISION ACCESSORIES & TOOLINGAt the Premises

14309 Sommermeyer St., HOUSTON, TEXAS 77041(See Directions on Back Page)

NO CHARGE FOR RIGGING MACHINERY ONTO CUSTOMER SUPPLIED TRUCKS

2 3

SHIBAURA (TOSHIBA) MDL. BF-13A FLOOR TYPE HORIZONTAL BORING MILL

TABLE TYPE HORIZONTAL BORING MILLSGIDDINGS & LEWIS FRASER 5", Mdl. A130-T, 5.11" spndl., No. 50 taper, 30" spndl. trvl., (4) spndl. spd. ranges, spds.: 6–1,120 RPM, fds. to 140 IPM, 140 IPM rapids, 48" x 96" tbl., 84" tbl. cross trvl., 156" saddle length, 70" headstock vert. trvl., 30 HP, pwr. drawbar, outriggers, new pendant ctrl., new electrics w/PLC, mech. work: X, Z-axis ways reground, mating surfaces re-scraped to fit, lube system checked and repaired, gibs, clamps and way wipers cleaned and repaired, elec. work: New Electrics Inc. starters, relays and drives, new pendant-station w/buttons and ctrls., S/N 150-1595.WOTAN 5-1/8", Mdl. B130l, 5-1/8" spndl., No. 6 MT, 35" spndl. trvl., (33) spndl. spds.: 2.5–1,000 RPM, (27) fds.: 0.0013–0.500 IPR, 60" x 118" tbl., 108" tbl. cross trvl., 75" long trvl., 70" headstock vert. trvl., 112 IPM rapids, 183" saddle, 25 HP, Pratt & Whiney 50" pwr. rotation tbl., 28" facing head, Sony 3-axis D.R.O., right angle head, spndl. suppt., outriggers, threading, pendant, misc. tooling, S/N 54348.UNION 5-1/8", Mdl. BFT130/6, 5-1/8" spndl.,ISO 50 taper, (27) spndl. spds.: 4.5–900 RPM, (18) facing head spds.: 4.5–180 RPM, 39.3" spndl. trvl., 55" x 63" rotation tbl., 78" tbl. cross trvl., 78" headstock vert. trvl., 17,600 lb. tbl. load, threading, 25 HP, 30.5" facing head, pendant, outriggers, S/N 11287.UNION 5-1/8", Mdl. BFT130/5, 5-1/8" spndl.,ISO 50 PDB spndl. taper, (27) spndl. spds.: 4.5–900 RPM, (18) facing head spds.: 4.5–180 RPM, 39.3" spndl. trvl., 55" x 63" rotation tbl., 78" tbl. cross trvl., 47" tbl. long trvl., 63" headstock vert. trvl., 17,600 lb. tbl. load, 25 HP, feeds, rapids, threading, 30.5" facing head, pwr. drawbar, out-board suppt., pendant, outriggers, S/N 10668.UNION 5", Mdl. BFT125/5, 5" spndl., metric 80 taper, 39" spndl. trvl., spndl. spds.: 3.55–710 RPM, 55" x 63" rotation tbl., 63" tbl. cross trvl., 80" tbl. long trvl., 63" head-stock vert. trvl., 17,600 lb. tbl. load, 23 HP, 31" built-in facing head, outboard suppt., pendant, S/N 8662/66.LUCAS 5", Mdl. 542B120, 5" spndl., No. 50 taper, 36" spndl. trvl., spds.: 9–1,200 RPM, 48" x 110" tbl., 96" tbl. cross trvl., 60" saddle trvl., 60" headstock vert. trvl., 20 HP, hardways, pendant, S/N 42B1409.

CNC TABLE TYPE HORIZONTAL BORING MILLSGIDDINGS & LEWIS 5", Mdl. PC50, G&l 800M pendant mtd. CNC ctrl., 5" spndl. dia., No. 50 spndl. taper, spndl. spds.: 25–1,120 RPM, 48" x 96" tbl., 36" spndl. trvl. (Z), 96" tbl. cross trvl. (X), 72" vert. headstock trvl. (Y), 54" tbl. long trvl. w/o suppt. (W), 60,000 lb. tbl. load, 207" saddle length, 84" bed length, 25 HP, pwr. drawbar, double outrigger suppts., auto. lube, S/N 445-38-79.

GIDDINGS & LEWIS 5", Mdl. 65-H5-T, Allen Bradley 9 Series CNC ctrl., 5" spndl., No. 50 taper, 1,020 RPM, 48" x 72" tbl., 60" tbl. cross trvl., 48" headstock vert. trvl., 36" spndl. trvl., 125" saddle bedways, 96" bed, 30 HP, 3-way vert. column, 4-way bed, pwr. drawbar, pendant, S/N 420-31-62.

CINCINNATI GILBERT 5", Allen Bradley 9 Series CNC ctrl., 5" spndl., No. 50 spndl. taper, spndl. spds.: 5–1,000 RPM, 48" x 96" T-slotted tbl., 35" spndl. trvl. (Z), 96" tbl. cross trvl. (X), 72" headstock vert. trvl. (Y), 45" saddle trvl. (W), 140" saddle length, 108" bedways length, spndl. fds.: 0.05–200 IPM, milling and saddle fds.: 0.05–100 IPM, 30 HP, pendant, outriggers, pwr. drawbar, central lube system, ballscrews, S/N 292-J.

GIDDINGS & LEWIS 4", Mdl. J65-E4-T, Fanuc 21i-M CNC ctrl., 4" spndl., No. 50 taper, 30" spndl. trvl., 1,300 RPM, 36" x 62" tbl., 48" tbl. cross trvl., 24" saddle long trvl., 86" saddle length, 36" headstock trvl., 20 HP, 3-way column, outriggers, pendant, S/N 400-71-65.

FLOOR TYPE HORIZONTAL BORING MILLSGIDDINGS & LEWIS 8", Mdl. 780F, 8" main spndl., No. 7 MT, 72" spndl. trvl., 144" headstock vert. trvl., 240" column horz. trvl., 364"L x 84"W runway, 50 HP, operator’s platform, S/N N/A.

GIDDINGS & LEWIS 8", Mdl. 780F, 8" main spndl., No. 7 MT, 72" spndl. trvl., 96" headstock vert. trvl., 44" column horiz. trvl., horiz. trvl., 246"L x 84"W runway, 50 HP, operator’s platform, S/N 9057.

GIDDINGS & LEWIS 7", Mdl. 570F, 7" main spndl. dia., No. 7 MT, 60" spndl. longitudinal trvl., spds.: 1.6–300 RPM, fds.: 0.005–0.250 IPR, 24"–140" top of runway to c/l spndl., 2-1/2" high-spd. spndl. dia., No. 4 MT taper, 15" spndl. long trvl., spds.: 6–1,200 RPM, fds.: 0.002–0.125 IPR, 36"–152" top of runway to c/l spndl., 120 IPM rapids, 116" headstock vert. trvl., 240" column horiz. trvl., updated electrics and ctrls., operator’s platform, new lube pumps, S/N N/A.

GIDDING & LEWIS 6", Mdl. 460F, 6" spndl., No. 7 MT, 48" spndl. trvl., spds.: 3–800 RPM, 144" column trvl. on runway, 120" headstock vert. trvl. on column, 220"L x 60"W runway, 30 HP, hard bedways, operator’s platform, S/N 200-6-57.

SHIBAURA (TOSHIBA) 5.12", Mdl. BF-13A, 5.12" spndl., No. 50 taper, spds.: 4–800 RPM, 35.4" spndl. trvl., 7.09" milling spndl. ram dia., 21.65" milling spndl. ram trvl., 234" horiz. column trvl., 98" vert. head trvl., 224" overall height, 25 HP, pendant, Sony 3-axis D.R.O., pwr. drawbar, chip conveyor, operator’s platform and ladder, hard bed and column ways, S/N 211.

5" GIDDING & LEWIS MDL. PC50 CNC HORIZONTAL BORING MILL

CNC

TREMENDOUS OFFERING OF CHIP MAKING & FABRICATING MACHINE TOOLS, PRECISION

ACCESSORIES & TOOLINGAt the Premises

14309 Sommermeyer StreetHOUSTON, TEXAS 77041

(See Directions on Back Page)

AUCTION: WEDNESDAY MAY 21 • 9:30 A.M.AUCTION

INSPECTION: Tuesday, May 20 9:00 A.M. to 4:00 P.M. & Morning of Sale

2 3

COLLET & ENGLEHARDT 5", Mdl. BFT130, 5-1/8" spndl., No. 6 MT, spds.: 5.5–800 RPM, 42" spndl. horiz. trvl., 63" x 71" rotation tbl., 65" tbl. cross trvl., 115" tbl. long trvl., 68" headstock vert. trvl., 17.5 HP, 26" facing head, outriggers, operator’s platform, S/N D5691.

GIDDINGS & LEWIS FRASER 5", Mdl. 65T5, 5" spndl., No. 50 taper, 36" spndl. trvl., spndl. spds.: 7.5–975 RPM, 60" x 120" tbl., 108" tbl. cross trvl., 72" headstock vert. trvl., 30 HP, pwr. draw bar, outboard suppt., outriggers, pendant, S/N 150-719-64.

SELLERS 5", 5" spndl., spds.: 5.8–334 RPM, No. 7 MT, 36" spndl. trvl., 48" x 88" tbl., 72" tbl. cross trvl., 62" tbl. long trvl., 48" headstock vert. trvl., 15 HP, Newall 3-axis D.R.O., rapids, threading, S/N N/A.

IKEGAI 4.9", Mdl. DA2125T, 4.9" spndl., No. 6 MT, spds.: 10–1,000 RPM, 47" x 56" rotation tbl., 60" tbl. cross trvl., 60" tbl. in/out trvl. w/outboard, 48" headstock vert. trvl., 15 HP, 29.5" facing head, pendant, outboard suppt., outriggers, right angle head, spndl. suppt., Newall 3-axis D.R.O., No. 45 quick change tooling adapter, S/N 16927A.

GIDDINGS & LEWIS 4", Mdl. J65-E4-T, 4" spndl., No. 50 PDB taper, 30" spndl. trvl., spds.: 6.9–1,320 RPM, 48" x 84" tbl., 20,000 lb. load, 72" tbl. cross trvl., 60" headstock vert. trvl., 34" saddle long trvl., 20 HP, 3-shear vert. ways, outriggers, Newall 3-axis D.R.O., pendant, cool-ant pan, S/N 400-57-65.

MONTI 4", Mdl. MCS100, 4" spndl., ISO 50 taper, 27.5" spndl. trvl., (18) spndl. spds.: 12–1,200 RPM, 47" x 59" rotation tbl., 8,800 lb. load, 74.8" tbl. cross trvl., 59" tbl. long trvl., 47.2" headstock vert. trvl., 236 IPM rapids, 15 HP, D.R.O, 4-axis, (2) displays, pendant, pwr. draw-bar, outriggers, univ./vert. head, lots of tooling, S/N N/A.

CINCINNATI GILBERT 4", 4" spndl., No. 50 taper, spds.: 7–1,610 RPM, 30" spndl. trvl., 48" x 60" tbl., 60" tbl. cross trvl., 48" headstock vert. trvl., 20 HP, pendant, hard ways, tele. way covers, pwr. drawbar, S/N 4C-180.

PLAUERT & WETZEL 4", 4" spndl., No. 5 MT, spndl. spds.: 4.5–1,250 RPM, 35" spndl. trvl., 61" x 70" rotation tbl., 84" tbl. cross trvl., 66" tbl. long trvl., 60" headstock vert. trvl., fds.: 0.0008–0.038 IPR, 15 HP, 26" facing head, outriggers, pendant, outboard suppt., right angle head, Newall 3-axis D.R.O., S/N N/A.

SUMMIT 4", 3.94" spndl., No. 50 NMT, spds.: 12.5–1,180 RPM, 29-1/2" spndl. trvl., 48" x 60" rotation tbl., 11,000 lb. cap., 68" tbl. cross trvl., 50" headstock vert. trvl., 48" saddle trvl., 15 HP, built-in rotation tbl., pendant, 20" facing head, way covers, out-board suppt., S/N 110.

SUMMIT 4", Mdl. ADF100, 4" spndl., No. 5 MT, (18) spndl. spds.: 12.5–1,250 RPM, 27-1/2" spndl. trvl., 43-5/8" x 51-1/2" rotation tbl., 11,000 lb. load, 56" tbl. cross trvl., 50" headstock vert. trvl., 48" saddle trvl., 15 HP, pendant, outboard suppt., outrig-gers, S/N 108.

WOTAN 4", Mdl. B100l, 4" spndl., No. 50 taper, spds.: 14–200 RPM (low) and 250–1,600 RPM (high), 40" x 68" tbl., 60" tbl. cross trvl., 48" headstock vert. trvl., 15 HP, pendant, outriggers, spndl. suppt., rapids, S/N 52354.

GIDDINGS & LEWIS 4", Mdl. 70-4JE-3X, 4" spndl., No. 50 PDB taper, spndl. spds.: 6.9–1,320 RPM, 36" x 60" tbl., 15,000 lb. load, 48" tbl. cross trvl., 48" headstock vert. trvl., 20 HP, Machine Mate PC based ctrl., Hansen refrigeration unit, operator’s-sta-tion, S/N 405-28-68.

GIDDINGS & LEWIS 3", Mdl. 300T, 3" spndl., No. 5 MT, 24" spndl. trvl., (36) spndl. spds.: 22–1,600 RPM, 30" x 48" tbl., 36" tbl. cross trvl., 36" headstock vert. trvl., 10 HP, 30" x 30" rotation tbl., pendant, S/N G-1094.

GIDDINGS & LEWIS 3", Mdl. 330T, 3" main spndl., No. 5 MT, 30" x 62" tbl., 48" tbl. cross trvl., 36" long trvl., 36" headstock vert. trvl., rapids, S/N N/A.

5-1/8" UNION MDL. BFT130/5 TABLE TYPE HORIZONTAL BORING MILL

5" COLLET & ENGLEHARDT MDL. BFT130 TABLE TYPE HORIZONTAL BORING MILL

IKEGAI MDL. DA2125T TABLE TYPE HORIZONTAL BORING MILL

4" MONTI MDL. MCS100 TABLE TYPE HORIZONTAL BORING MILL

4 5

102" FRORIEP VERTICAL BORING MILL

VERTICAL BORING MILLSFRORIEP 102", 102" dia. chuck, 240" swing w/cross rail head, 218" max. turning dia. to cntr., 25 T. cap. tbl., tbl. spds.: 0.38–38 RPM, 45.5" vert. turret trvl. on cross rail, 123" horiz. turret head trvl. on cross rail, 5-pos. turret, 35" cross rail vert. adj., 75 HP, new electrics, pwr. indexing turret, pwr. column movement, pwr. column clamp, all new electrics in cabinet, S/N 9.156.00.BULLARD DYNATROL 86" HIGH COLUMN, 86" dia. plain tbl., 92" swing w/side head, 98" swing w/o side head, 132" under rail (48" extra), 122" cross rail vert. trvl., 140-1/2" tbl. to ram face, 110" R.H. ram vert. trvl., 110" L.H. ram vert. trvl., 30 deg. swivel, (20) tbl. spds.: 3–120 RPM, fds.: 0.003–0.750 IPR, 126,000 lb. weight, pistol grip style ctrls., hyd. rail binders, S/N 30979.BULLARD DYNATROL 86", 4-jaw manual chuck, 98" swing, 84" under rail, 74" rail adj., (20) tbl. spds.: 3.2–120 RPM, fds.: 0.001–0.250 IPR, 60" L.H. and R.H. vert. ram trvls., 100 HP, R.H. ram w/threading (rebuilt 2011), pwr. rail binders, rapids, pendant, S/N 33497.MORANDO 67", Mdl. VS17, 67" tbl. w/(4) boring mill jaws, 75" swing, 74" under rail, 170 RPM, 65 HP, (2) swivel ram heads, side head, coolant, rapids, pwr. rail elevation, pwr. clamp, pendant, upgraded electric., lft. ram equipped w/grndng. spndl. and added fds. w/grndng. spndl. ctrls. on pendant, S/N 05226.SUMMIT 60", 57" tbl. w/(4) boring mill jaws, 65" swing, 17,500 lb. load, 47" max. machine height over tbl., 30" turret head vert. stroke, 47" ram head vert. stroke, 35 deg. L-R swivel head, 27-1/2" sidehead horiz. trvl., 43" vert., (16) tbl. spds.: 4–203 RPM, 75 HP, pendant, coolant, misc. turret tooling, S/N 2995-76.GIDDINGS & LEWIS HYPRO 54", 52" dia. plain tbl. w/par. and rad. T-slots, 57" swing, 46" under rail, (4) tbl. spds.: 3.1–144 RPM, (16) fds.: 0.003–0.500 IPR, 32" ram vert. trvl., 2-3/4" ram bore, 27" turret head trvl., 2-3/4" turret head bore, 26" side head horiz. trvl., 36" side head vert. trvl., 50 HP, L.H. swivel ram head, R.H. turret head, side head, pendant, rapids, pwr. rail clamp, flush floor mount (no pit required), S/N 550-34-56.KING 52", 52" dia. tbl., 59-3/8" swing w/sidehead below tbl., 56" w/sidehead working, 44" under rail, 32" rail adj., (4) tbl. spds.: 2.25–110 RPM, 10 FPM rapid, R.H. ram: 35-1/2" horiz. trvl., 43-1/2" vert., L.H. ram: 35-1/2" horiz. trvl., 43-1/2" vert., 60 deg. ram swivel, 15-7/8" btwn. R.H./L.H. ram heads, side head: 25" horiz. trvl., 41-1/2" vert., 30 HP, pendant, S/N 2693.

CNC VERTICAL MACHINING CENTERSMAZAK MDL. V-655B, Mazatrol M-32B CNC ctrl. w/color thin film transistor, 68.5" x 25.59" tbl., 4,400 lb. load, 59.05" X-axis, 25.59" Y-axis, 25.59" Z-axis, 7.87"–33.46" tbl. to spndl. nose, (2) spndl. spds.: 25–6,000 RPM, No. 50 taper, (60) tools, 20 HP, chip conv., flood coolant, auto. pallet shuttle sys., tool mea-sure sys., rigid tapping, S/N 106339.

MAZAK MDL. V-15, Vickers 2100 Acramatic CNC ctrl., 55.1" x 26.7" tbl., 40" Y-trvl., 20" X-trvl., 30" Z-trvl., 8"–38" spndl. nose to tbl., 21.6" spndl. center to column, 33.5" floor to tbl. top, 3,300 lb. tbl. load, 15 HP, spds.: 14–2,000 RPM, No. 50 MT spndl. nose, 20 tool storage cap., max. tool dia. 5" full/17.7" empty, remote pendant, transformer, coolant, S/N M-10294.VANGUARD MDL. GMB100X20 BRIDGE TYPE, Fanuc 18-Mi CNC ctrl., 39" x 78" tbl., 49" btwn. column, 6,600 lb. load, 78" X-trvl., 39" Y-trvl., 23" Z-trvl., No. 50 taper, spds.: 40–6,000 RPM, 25 HP, Heidenhain scales, pulse gen., rigid tapping, coolant, chip conv., S/N 060703.

CNC VERTICAL BORING MILLSBULLARD DYN-AU-TAPE 56", 56" tbl. w/4-jaw pwr. combination chuck, 68" swing, 68" under rail (24" extra), 50" ram head vert. trvl., 41.5" ram head horiz. trvl., 12.75" H.D. ram, 58.5" cross rail trvl., 100 HP, spds.: 2–320 RPM, 24" extra column height, 16-station tool block changer, 2-spd. transmission, pwr. rail binders, no ctrl., S/N 33527.SCHIESS-FRORIEP 49", Mdl. 16DS125, Forkhardt valve indexing chuck, 63" max. swing, 63" max. turning height, 40" vert. ram trvl., 40" horiz. ram trvl., 43.31" cross rail adj., 10" sq. ram, 17,600 lb. max. workpiece weight, 75 HP, (2) gear ranges–(29) spds. per gear range, tbl. spds.: 3.15–315 RPM, 12-pos. tool changer, single-column design, ram head on rail, S/N 1171.0452.GRAY RINGMASTER 48", Fanuc 15T CNC ctrl., 48" tbl., 56" max. swing, 48" max. height under rail, 30" turret head vert. trvl., 30" turret head horiz. trvl. right of cntr., 6" turret head horiz. trvl. left of cntr., 50 HP, tbl. spds.: 9.5–290 RPM, 5-sided turret head w/pwr. index, pwr. rail elevation, pwr. rail clamp, auto. lube, S/N 9811.GIDDINGS & LEWIS 48" CNC VTC, Giddings & Lewis 8000B CNC ctrl., 48" plain tbl. w/T-slots, 60" swing, 72" under rail (24" extra), 60" rail trvl., 60 HP, (2) tbl. spds.: 3–333 RPM, 62" R.H. ram trvl., 50" L.H. live spndl. ram trvl., 25 HP, live spndl. spds.: 15–2,200 RPM, 30-pos. A.T.C., hard ways, pwr. rail elevation, chip conveyor, part probe, tool probe, flood coolant, coolant through ram, from U.S. Government surplus, 2946.4 H.O.M., S/N 512-281-90.BULLARD DYN-AU-TAPE 46" CNC VERTICAL TURRET LATHE, 46" tbl. dia., 4-jaw chuck (no master or top jaws), 58" max. swing, 33" max. height under rail, 22" cross rail adj., 37" vert. turret trvl., 35.5" horiz. turret trvl., (20) tbl. spds.: 5.12–187 RPM, 5-sided pwr. index turret head, pwr. elevation, pwr. clamp, S/N 32614 (No CNC ctrls.).

67" MORANDO MDL. V517 VERTICAL BORING MILL

48" GIDDINGS & LEWIS CNC VERTICAL TURNING CENTER

CNC

AUCTION: WEDNESDAY, MAY 21 • 9:30 A.M.

60" SUMMIT VERTICAL BORING MILL

4 5

<70" SCHIESS MDL. 20DKE180 VERTICAL TURRET LATHE

<56" BULLARD DYNATROL VERTICAL TURRET LATHE

>42" BULLARD CUTMASTER

VERTICAL TURRET LATHE

KING 42", 42" tbl. w/(4) boring mill jaws, 45" swing w/sidehead, 47" swing, 48" under rail, 35" rail adj., (16) tbl. spds.: 3.10–93.0 RPM, (16) fds.: 0.0025–0.125 IPR, +/-60 deg. ram head swivel, 25 HP, threading on ram head, fine fds., pendant, rapids, S/N 2665.SCHIESS 70" VERTICAL TURRET LATHE, Mdl. 20DKE180, 70.9" 4-jaw chuck, 73" swing, 49.2" under rail, 35.4" vert. cross rail trvl., 26,500 lb. load, tbl. spds.: 4–200 RPM, 27.5" vert. turret trvl., +/-45 deg. turret swivel, 4-pos. pwr. turret on rail, 4-pos. sidehead, elevating rail, (2) toolholders on turret head, no main drive motor or pendant, S/N 78996.BULLARD CUTMASTER 56" VERTICAL TURRET LATHE, Mdl. 75, 56" 3-jaw pwr. chuck tbl., 68" swing, 48" under rail, (20) tbl. spds.: 5.4–200 RPM, (16) fds.: 0.00065–0.125 IPR, 36" rail adj., 32-7/8" ram head horiz. trvl., 42" vert., 37" horz. turret head trvl., 30-5/8" vert., (2) horiz. side head trvls., 46-3/4" vert., 37" tbl. height, 40 HP, 4-sided turret head, pwr. index, pendant, Manautrol attach. for ea. head, tracer attach. lift ram head, S/N 30560.BULLARD DYNATROL 56" VERTICAL TURRET LATHE, 56" dia. tbl. w/3-jaw manual chuck, 68" swing w/side head below tbl., 48" under rail, (20) tbl. spds. to 200 RPM, R.H. ram: 60" vert. trvl., L.H. ram: 60" vert. trvl., sidehead: 46-3/4" vert. trvl., 31-3/4" horiz. trvl., 50 HP, 4-sided pwr. index turret on R.H. and L.H. rams, pendant ctrl., S/N 31859.BULLARD DYNATROL 56" VERTICAL TURRET LATHE, 56" 3-jaw manual chuck, 68" swing w/sidehead below tbl., 48" under rail, (20) tbl. spds.: 5.47–200 RPM, 30-3/4" vert. turret trvl., 46-3/4" vert. sidehead trvl., 31-3/4" horiz. side head trvl., 50 HP, 5-sided turret head w/pwr. index, sidehead w/pwr. index, pwr. rail clamp, rapids in all directions, auto. lube, hard chrome insert ways on rail, S/N 31915.BULLARD DYNATROL 56" VERTICAL TURRET LATHE, 56" tbl. w/3-jaw manual chuck, 68" swing w/o sidehead, 45.5" under rail, (20) tbl. spds.: 5.47–200 RPM, 27" vert. turret trvl., 44.5" vert. side head trvl., 26.5" horiz. sidehead trvl., 50 HP, pwr. index turret, pwr. index sidehead, S/N 31893.BULLARD SPIRAL DRIVE 54" HIGH COLUMN VERTICAL TURRET LATHE, 50" dia. tbl. w/4-jaw chuck, 56" swing, 66-1/2" under rail (28" extra), 76-1/2" under turret face, (12) tbl. spds.: 3.5–60 RPM, (8) fds.: 0.011–0.500 IPR, 27" turret vert. trvl., 56" turret horiz. trvl., 45 deg. turret swivel, 27" sidehead horiz. trvl., 57" sidehead vert. trvl., 25 HP, 5-pos. turret, S/N 14644.FRORIEP 55" VERTICAL TURRET LATHE, 55" tbl. w/(4) boring mill jaws, 63" swing w/o sidehead, 59" w/side head, 44" under rail, 4 T. cap. tbl. load, tbl. spds.: 2.8–140 RPM, fds.: 0.002–0.154 IPR, 27" turret vert. trvl., 30" sidehead horiz. trvl., 78 IPM rapids, 30 HP, pendant, S/N W16690.

BULLARD DYNATROL 46" VERTICAL TURRET LATHE, 46" tbl. w/4-jaw ind. chuck, 49" swing w/sidehead working, 58" swing w/sidehead below tbl., 40" under rail, 30" rail adj., (20) tbl. spds.: 6.83–250 RPM, fds.: 0.001–0.250 IPR, 26" vert. turret trvl., 31" horiz. right of cntr., 34-1/2" horiz. left of cntr., 30 deg. R-L swivel, 38-3/4" vert. sidehead trvl., 23-3/4" horiz., 37" tbl. height, 5-pos. turrret head, 4-pos. side head, repl. chrome insert ways on rails, manual rail clamp, rapids, S/N 32093 (Parts Machine).BULLARD CUTMASTER 42" VERTICAL TURRET LATHE, 42" dia. 3-jaw chuck tbl., 45" swing w/sidehead, 54" swing w/o sidehead, 37" under rail, 25" rail adj., (20) tbl. spds.: 4–150 RPM, (16) fds.: 0.0026–0.500 IPR, 30-3/8" vert. turret trvl., 26-3/8" horiz. turret trvl., 30 deg. L-R turret head swivel, 30 HP, 5-pos. swivel turret head, 4-pos. sidehead, rapids, pendant, no pit required, S/N 28900.BULLARD MAN-AU-TROL 42" VERTICAL TURRET LATHE (Parts machine, no chuck at present).BULLARD DYNATROL 36" VERTICAL TURRET LATHE, 36" tbl. w/4-jaw chuck w/top jaws, 39" swing w/sidehead, 48" swing w/o sidehead, 30" under rail, (20) tbl. spds.: 13–468 RPM, fds.: 0.001–0.250 IPR, 26" vert. turret trvl., 43-3/4" horiz. turret trvl., 28-3/4" vert. sidehead trvl., 23-3/4" horiz. sidehead trvl., 50 HP, 5-pos. turret on cross rail w/(2) toolholders, 4-pos. toolpost on sidehead, auto. lube, pendant, coolant, S/N 31640.GIDDINGS & LEWIS 36" VERTICAL TURRET LATHE, 36" tbl. dia., 4-jaw pwr. comb. chuck, 48" swing, 48" under rail (12" extra), 36" rail trvl., 36" vert. turret trvl., 57" height under turret face, 30 deg. L-R turret swivel, 40 HP, tbl. spds.: 5–380 RPM, pendant ctrl., pwr. indexing, turret thread and angle turning attach., coolant system, S/N 510-19-66.BULLARD DYNATROL 36" VERTICAL TURRET LATHE, 39" swing w/sidehead, 48" swing w/o sidehead, 54" under rail, 44" rail adj., (20) tbl. spds.: 13–468 RPM, 26" vert. turret trvl., 43" horiz. turret trvl., 52.75" vert. sidehead trvl., 24" horiz. sidehead trvl., 4-pos. turret, 50 HP, S/N 30995 (Parts Machine).BULLARD DYNATROL 36" VERTICAL TURRET LATHE, 36" tbl. w/4-jaw pwr. chuck, 39" swing w/sidehead, 48" swing w/o sidehead, 30" under rail, 20" rail adj., (20) tbl. spds.: 13–468 RPM, 26" vert. turret trvl., 43.75" horiz. turret trvl., 28.75" vert. side-head trvl., 23.75" horiz. sidehead trvl., 50 HP, 5-pos. turret, 4-pos. sidehead, pendant, S/N 31639 (Parts Machine).

<52" KING VERTICAL BORING MILL

>86" BULLARD

DYNATROL HIGH COLUMN

VERTICAL BORING MILL

AUCTION

On-Site Bidding in Houston, Texas

or Bid Via Webcast at

NO CHARGE FOR RIGGING MACHINERY

ONTO CUSTOMER SUPPLIED TRUCKS

6 7

On-Site Bidding in Houston, Texas or Bid Via Webcast at

AMERICAN 50" X 36' HEAVY DUTY ENGINE LATHE, 50" sw. over bed, 34" sw. over crosslide, 36' btwn. cntrs., (18) spndl. spds.: 1.8–157 RPM 2-5/8" spndl. hole, (64) fds.: 0.006–0.338 IPR, threading, 50 HP, 48" built-in faceplate, pwr. compound, rapids, steadyrest, S/N 73024-52.MONARCH 45" X 240" ENGINE LATHE, Mdl. 2516-35, Series 81, 45" sw., 35" sw. over slide, 240" btwn. cntrs., 3-1/16" spndl. hole, spndl. spds.: 10–1,250 RPM, 48 feeds, 0.003 to 0.1683 IPR, (48) threads, 1/2 to 28 TPI, 5-3/4" tlstk. spndl. dia., 10" trvl., No. 6 MT, 22" bed width, 30 HP, 4-way pwr. rapids, inch/metric threading, 4-way toolpost, chip pan, S/N 52747.MONARCH 44" X 60" ENGINE LATHE, Mdl. 4025-31, Series 91, 44" sw. over bed, 31" sw. over crosslide, 60" btwn. cntrs., 52" spndl. cntr. to floor, (36) spndl. spds.: 6–750 RPM, 4-1/16" spndl. hole, D-1-11 spndl. nose, No. 7 MT, (48) fds.: 0.0035–0.196 IPR, 7-1/4" tlstk. spndl. dia., 12" tlstk. spndl. trvl., 31-1/2" bed width, 40 HP, faceplate type chuck, taper attach., rapids, thread dial, S/N 50219.SHENYANG (SMTCL) 39" X 120" HEAVY DUTY ENGINE LATHE, Mdl. CW61100B/3000, 39.3" sw. over bed, 24" sw. over carriage, 118" max. workpiece length, 5.11" spndl. bore, 30" bed width, spds.: 3.15–315 RPM, 6.3" tlstk. quill, 12" quill trvl., No. 6 MT tlstk., 30 HP, 39" 4-jaw chuck, followrest, steadyrest, thread dial, chuck guard, S/N GM0126.MONARCH 34" X 240" ENGINE LATHE, Mdl. 2516-25, Series 613, 34" sw., 25" sw. over slide, 240" btwn. cntrs., 2-1/16" spndl. hole, D-1-8" Camlock, spndl. spds.: 12–1,500 RPM, (66) fds.: 0.0022–0.1366 IPR, (66) threads, 1/2 to 30 TPI, 4-1/2" tlstk. spndl. dia., 9" trvl., 19-1/2" bed width, 25 HP, 4-way pwr. rapids, inch/metric threading, 4-way tool-post, chip pans, S/N 52733.MONARCH 34" X 168" ENGINE LATHE, Mdl. 2516-25, Series 613, 34" sw., 25" sw. over slide, 168" btwn. cntrs., 2-1/16" spndl. hole, D-1-8" Camlock, spndl. spds.: 12–1,500 RPM, (66) fds.: 0.0022–0.1366 IPR, (66) threads, 1/2 to 30 TPI, 4-1/2" tlstk. spndl. dia., 9" trvl., 19-1/2" bed width, 25 HP, 4-way pwr. rapids, inch/metric threading, 4-way tool-post, chip pans, S/N 52731.MONARCH 34" X 60" HEAVY DUTY ENGINE LATHE, Mdl. 32NN, 34.5" sw. over bed, 18" sw. over crosslide, 60" btwn. cntrs., (16) spndl. spds.: 6–303 RPM, 2-3/16" spndl. hole, D-1-11 spndl. nose, (48) fds.: 0.006–0.363 IPR, (48) threads, 1 to 56 TPI, 4-7/8" tlstk. spndl. dia., No. 6 MT, 13" tlstk. spndl. trvl., 31-1/2" bed width, 25 HP, 24" 4-jaw chuck, hard ways, quick change toolpost, Newall 2-axis D.R.O., S/N 31683-K.AMERICAN PACEMAKER ENGINE LATHE 32" X 96", 32" sw. over bed, 19-1/2" sw. over cross slide, 96" btwn. cntrs., (27) spndl. spds.: 6–600 RPM 2-3/16" spndl. hole, l-3 spndl. nose, (60) fds.: 0.004–0.240 IPR, (60) threads, 1/2 to 30 TPI, 30 HP, 24" 4-jaw chuck, taper attach., steadyrest, coolant pump, chip pan bed, thread dial, tlstk., S/N 71116-48.

CNC LATHES, ENGINE LATHES, HOLLOW SPINDLE LATHES, TRACER LATHES & TURRET LATHES

BINNS & BERRY 48" X 120" CNC HOLLOW SPNDL. LATHE, Fagor 8050 CNC ctrl., 48" sw. over bed, 38" sw. over cross slide, 120" btwn. cntrs., 14.25" spndl. bore, A2-20 spndl. nose, spndl. spds.: 5–600 RPM, 8 tool-pos., vdi turret, 50 HP, 42" 4-jaw chuck (3 jaw scroll and 1 ind. jaw), pwr. chuck wrench, (4) steadyrests, tlstk., chip conv., chip/splash guards, misc. turret tooling, S/N 80217.

MAZAK 24" X 80" CNC HORIZ. LATHE, Mdl. M-5, Fanuc 5T CNC ctrl., 24" sw. over bed, 13" sw. over crosslide, 80" btwn. cntrs., 4" spndl. bore, 30 HP, 15" 3-jaw hydraulic chuck, 2,000 RPM, tlstk., chip conv., splash guard, coolant, S/N 40395.

MAZAK 22" X 60" CNC HORIZ. LATHE, Mdl. M-4, Fanuc 5T CNC (issue with ctrls.), 22" sw. over bed, 11" sw. over cross slide, 60" btwn. cntrs., 3.125" spndl. bore, 20 HP, 12" 3-jaw hyd. chuck, spds.: 13–2,200 RPM, tlstk., chip conv., splash guard, coolant, S/N 12716.

DAINICHI 27" X 39" CNC LATHE, Mdl. B-70, Fanuc 6TB CNC ctrl., 27" sw. over bed, 19.5" over carriage, 39" btwn. cntrs., 4" spndl. hole, spndl. spds.: 10–1,800 RPM, 6.3" tlstk. spndl. dia., No. 5 MT taper, 12-tool turret, 40/50 HP, Kitagawa 3-jaw front mount chuck, chip conv., misc. tooling, S/N N/A

MESTA 90" X 58' HEAVY DUTY ROLL LATHE, 90" sw. over bed, 68" sw. over carriage, 58' btwn. cntrs., (21) spndl. spds.: 0.53–27 RPM, 84" chuck w/(4) ext. HD boring mill jaws, 86" wide 3-shear bed, (2) carriages w/AC drives and pendant ctrls., 12" HD tlstk. quill, 100 HP, (2) HD babbitt type steady rests, (2) HD roller type steady rests, dig. sp. ind. for hdstk., S/N N/A.

NILES 110" X 348" ENGINE LATHE, 110" sw. over ways, 102" over saddle wings, 90" over crosslide, 98" max. turn dia., 348" btwn. cntrs., 20 T. load, spndl. spds.: 1.5–80.1 RPM, 7" tlstk. dia., 72" 4-jaw chuck, 50 HP, hard repl. ways, new leadscrew, rapids, threading, 77" sq. faceplate, 92" tlstk. faceplate, steadyrest, S/N 22590.

SKODA 63" X 315" HEAVY DUTY ENGINE LATHE, Mdl. SR 1600 X 8000, 63" sw. over bed, 48" sw. over cross slide, 315" btwn. cntrs., (24) spndl. spds.: 1.8–355 RPM 61,600 lb. load btwn. cntrs., 67" bed width, 60 HP, 60" faceplate w/(4) boring mill jaws, 4-way bed, carriage can pass tlstk. and steadyrests, pwr. compound, live cntr. tlstk. quill, (2) steady-rests, 4-jaw chuck attach. for tlstk., rapids, S/N 17302.

MESTA 90" X 58' HEAVY DUTY ROLL LATHE48" X 120" BINNS & BERRY CNC HOLLOW SPINDLE LATHE

CNC

NO CHARGE FOR RIGGING MACHINERY

ONTO CUSTOMER SUPPLIED TRUCKS

44" X 60" MONARCH MDL. 4025-31 ENGINE LATHENILES 110" X 348" ENGINE LATHE

6 7

LEBLOND 30"/60" X 108"/180" H.D. SLIDING GAP BED ENG. LATHE, 30" sw. over bed, 60" over gap, 19" over cross slide, 108" btwn. cntrs. (gap closed), 180" gap open, (36) spndl. spds.: 6–625 RPM 2-3/16" spndl. hole, 3/8 to 46 TPI, 20 HP, slid-ing bed design, 24" 4-jaw chuck, taper attach., (2) steadyrests, tlstk., thread dial, rapids, S/N NI1355.

LEBLOND 30" X 24' ENGINE LATHE, 30-1/2" sw. over bed, 19-1/2" over comp. rest slide, 288" btwn. cntrs., (16) spndl. spds.: 6.5–400 RPM, 2-3/16" spndl. hole, 3/8 to 46 TPI, 20 HP, 24" 4-jaw chuck, taper attach., rapids, chip pan bed, coolant pump, thread dial, quick change toolpost, S/N NI821.

LEBLOND REGAL 26" X 96" GAP BED ENGINE LATHE, 26" sw. over bed, 18-1/4" swing over slide, 37" sw. in gap, 12-1/4" gap, 96" btwn. cntrs., 2-1/8" spndl. hole, spds.: 27–1,080 RPM, 2 to 112 TPI, 3-1/8" tlstk. spndl. dia., No. 5 MT, 10 HP, 21" 4-jaw chuck, taper attach., quick change toolpost, steadyrest, thread dial, chip pans, removable gap blk., S/N 3H661.

MONARCH 25" X 192" ENGINE LATHE, Series 612, 25" sw. over bed, 16" sw. over rest, 192" btwn. cntrs., (16) spndl. spds.: 12–1,500 RPM, 2-1/16" spndl. hole, D-1-8" Camlock spndl. nose, fds.: 0.0011–0.0683 IPR, 2 to 120 TPI thread range, 4-1/2" tlstk. spndl. dia., 9" tlstk. spndl. trvl., No. 5 MT tlstk. spndl., 6" compound rest top slide trvl., 19-1/2" bed width, 30 HP, 18" 4-jaw chuck, taper attach., (2) steadyrests, thread dial, hard ways, chip pans, coolant pump, S/N 47100.

DAEWOO 25" X 120" ENGINE LATHE, Mdl. DA25, 24.375" sw. over bed, 15.375" sw. over crosslide, 120" btwn. cntrs., 3" spndl. bore, D-1-8" Camlock spndl. nose, (20) spndl. spd. steps: 25–2,000 RPM, 12.25" crosslide trvl., 5.875" comp. rest trvl., tlstk., taper attach., inch/metric thread, chip pans, coolant pump, S/N 040060.

MIGHTY-TURN 28" X 120" ENGINE LATHE, Mdl. ML-28120GL, 28" sw. over bed, 16" sw. over cross slide,120" btwn. cntrs., (18) spndl. spds.: 7.5–1,050 RPM, 4.725" spndl. hole, No. 6 MT tlstk., 15 HP, 20" 4-jaw chuck, steadyrest, taper attach., quick change tool post, 4-way rapids, coolant sys., chip pans, S/N 95381.

MONARCH 28" X 72" ENGINE LATHE, Series 61, 28" sw. over bed, 19" sw. over crosslide, 72" btwn. cntrs., 1-9/16" spndl. hole, spds.: 24–1,000 RPM, 10 HP, 12" 3-jaw chuck, steadyrest, tlstk., chip pans, thread dial, S/N 42356.

22" X 150" AXELSON, 22" sw. o/bed, 15" sw. o/slide, 150" btwn. cntrs., 1-9/16" spndl. hole, D-1-6" spndl., nose, (24) spndl. spds., 13–1,577 RPM, (54) feeds, (54) threads, 10-5/8" slide trvl., 4-3/4" comp. rest trvl., 2-7/8" tstk. spndl. dia., 9" spndl. trvl., No. 4 MT taper, 16-7/8" bed width, 15 HP, 15" 4-jaw chuck, taper, (3) steadyrests, coolant, S/N 4576.LODGE & SHIPLEY 22" X 96" ENGINE LATHE, 22-1/2" sw. over bed, 15" sw. over cross slide, 96" btwn. cntrs., 2-1/2" spndl. hole, spds.: 13–752 RPM, No. 5 MT, 30 HP, coolant pump, chip pan bed, hardways, S/N 43057.SPRINGFIELD 20" X 174" ENGINE LATHE, 20-1/2" sw. over bed, 14-1/2" sw. over cross slide, 174" btwn. cntrs., spds.: 11–423 RPM, threading, No. 5 MT,7-1/2 HP, 15" 3-jaw chuck, 18" 4-jaw chuck, taper attach., steadyrest, followrest, chip pan, S/N 48077.LEBLOND 18" X 138" ENGINE LATHE, 18.5" sw. over bed, 11.25" sw. over cross slide, 138" btwn. cntrs., spds.: 15–525 RPM, 1-3/4" spndl. hole, No. 5 MT tlstk., 10 HP, taper attach., steadyrest, chip pan, S/N N/A.NARDINI 15" X 60" ENGINE LATHE, Mdl. ND1560E, 16" sw. over bed, 10" sw. over crosslide, 60" btwn. cntrs., spds.: 25–2,000 RPM, 2" spndl. hole, threading, 7-1/2 HP, 12" 3-jaw chuck, thread dial, tlstk., chip pan, coolant pump and piping, hardways, S/N N/A.SOUTHBEND 13" X 20" ENGINE LATHE, Mdl. CL-1307 13" sw. over bed, 7" sw. over cross slide, 20" btwn. cntrs., 4,000 RPM, 5 HP, taper attach., collet chuck, steadyrest, chuck guard, chip pan bed, S/N 72 SP 132.SOUTHBEND 9" X 24" ENGINE LATHE, 9-1/4" sw. over bed, 5-1/2" over cross slide, 24" btwn. cntrs., 450–1,270 RPM, 4 to 224 TPI, 2-1/8" tlstk. spndl. trvl., 5" 3-jaw chuck, collet closer with misc. collets, tlstk., thread dial, single tool post, chip pan bed, S/N 146161.MONARCH 20" X 30" TRACER LATHE, Series 61, 20.5" sw. over. bed, 10.5" sw. over. slide, 30" btwn. cntrs., spds.: 24–1,000 RPM, threading, tlstk., 7.5 HP, tracer attach., thread dial, coolant pump, chip pan, S/N 39497.WARNER & SWASEY SADDLE 4A TYPE TURRET LATHE W/CROSSLIDING TURRET, Mdl. M-1550, S/N 924021W.WARNER & SWASEY 3A SQ. HEAD SADDLE TYPE TURRET LATHE W/CROSSLIDING REAR TURRET, 6-1/4" spndl. hole, A-1-15 spndl. nose, 40/20 HP, 2-spd. mtr., 18" 3-jaw pwr. chuck, 4-way toolpost, chip pan bed, chuck guard, coolant, misc. turret tooling, rapids, S/N 1869200.

50" X 36' AMERICAN HEAVY DUTY ENGINE LATHE

34" X 240" MONARCH MDL. 2516-25 ENGINE LATHE

63" X 315" SKODA MDL. SR 1600 X 8000 HEAVY DUTY ENGINE LATHE

15" X 60" NARDINI MDL. ND1560E ENGINE LATHE

8 9

HORIZONTAL MILLS, PRODUCTION MILLS, VERTICAL MILLS, JIG MILLS & THREAD MILLS

DEVLIEG 6" CNC JIG MILL, Mdl. 65K-96, 6" spndl., No. 50 taper, 96" x 50" tbl., 96" horiz. trvl., 72" vert. trvl. (12" extra), 36" spndl. trvl., 24" tbl. retraction, 30 HP, spds.: 10–1,000 RPM, no ctrl., S/N 9680.DEVLIEG 4" JIG MILL, Mdl. 43K-48, 4" spndl., No. 50 taper, 48" x 35" tbl., 48" horiz. trvl. (X), 36" vert. trvl. (Y), 20" spndl. trvl. (Z), 16" tbl. retraction, spds.: 17–1,660 RPM, 15/7.5 HP, 2-spd., pendant ctrl., telescoping way covers, S/N 769022.DEVLIEG 3" JIG MILL, Mdl. 3K-72, 3" spndl., No. 40 taper, 60" spndl. vert. trvl., 16" horiz., (16) spndl. spds.: 17–1,660 RPM, (16) fds.: 0.0013–0.167 IPR, 45" x 72" tbl., 72" tbl. long trvl., 16" tbl. retract, rapids, pwr. drawbar, S/N 9367.DEVLIEG 3" JIG MILL, Mdl. 3B-48, 3" spndl., No. 40 taper, 36" spndl. vert. trvl., 16" horiz., (16) spndl. spds.: 25–1,200 RPM, (16) fds.: 0.002–0.020 IPR, (16) milling fds.: 0.5–36 IPM, 50–150 IPM rapids, 30" x 48" tbl., 48" tbl. long trvl., 16" tbl. retract, S/N 14-221.DEVLIEG 2-1/2" JIG MILL, Mdl. 2B-36, 2-1/2" spndl., No. 40 taper, 24" spndl. vert. trvl., 12" horiz., (16) spndl. spds.: 42–2,000 RPM, (16) fds.: 0.0016–0.018 IPR, (16) milling fds.: 0.4–32 IPM, 50–150 IPM rapids, 24" x 36" tbl., 36" tbl. long trvl., 12" tbl. retract, S/N 9199.KEARNEY & TRECKER NO. 430TF17 PLAIN HORIZ. MILL W/MTRZD. OVERARM, 94" x 17" tbl., 42" long feed, 14" cross, 18" vert., (24) main spndl. spds.: 15–1,500 RPM, (8) ram spndl. spds.: 100–1,600 RPM, No. 50 taper, 30 HP main, 5 HP ram, twin elev. screws, ram type mtrzd. overarm, rear ctrls., coolant pump, S/N 4-7275.KEARNEY & TRECKER NO. 430TF17 PLAIN HORIZ. MILL W/MTRZD. OVERARM, 94" x 17" tbl., 42" long feed, 14" cross, 18" vert., (24) main spndl. spds.: 15–1,500 RPM, (8) ram spndl. spds.: 100–1,600 RPM, No. 50 taper, 30 HP main, 5 HP ram, twin elev. screws, ram type mtrzd. overarm, rear ctrls., coolant pump, S/N 4-7451.KEARNEY & TRECKER NO. 425TF PLAIN HORIZ. MILL, 88" x 17" tbl., 42" long feed, 14" cross, 18" vert., 24 spndl. spds., 13–1,300 RPM, No. 50 taper, 25 HP, twin elev. screws, double overarm, rear ctrls., coolant pump, S/N 7-8233.KEARNEY & TRECKER NO. 425TF PLAIN HORIZ. MILL, 88" x 17" tbl., 42" long feed, 14" cross, 18" vert., (24) spndl. spds.: 13–1,300 RPM, No. 50 taper, 25 HP, twin elev. screws, double overarm, rear ctrls., coolant pump, S/N 9-8407.CINCINNATI MILACRON MDL. 100 POWERMATIC SIMPLEX PRODUCTION MILL, 12" x 48" tbl., 7-1/2 HP drive, 3 HP feed, auto. backlash elim., auto. spndl. stop, auto. cyc. select and ctrls., (2) arbors, arbor support, coolant sys., S/N 11B1P1AHE-66.

CINCINNATI MILACRON VERCIPOWER 20" X 86-1/2" BED TYPE VERT. MILL, Mdl. 450-20, 20" x 86-1/2" tbl., 42" long trvl., 18" cross, 24" vert., (24) spndl. spds.: 14–1,400 RPM, No. 50 taper, (32) long and cross feeds, (32) vert., 3/16 to 45 IPM, 2"–26" spndl. to tbl., 50 HP, rapids, S/N 331045V75-0002.

VANGUARD 10" X 54" VERTICAL MILL, Mdl. 4VS, 10" x 54" tbl., 40" long tbl. trvl., 16-1/2" cross, 16-1/2" vert., spndl. spds.: 60–4,200 RPM, R-8 taper, 5" quill trvl., 3-3/8" quill dia., fds.: 0.0015, 0.003, 0.006 IPR, 22-3/4" ram trvl., +/-45 deg. B-f HD tilt, +/-90 deg. R-l, 0"–16-1/2" tbl. to spndl., 4"–27" column to spndl., 3 HP, vari.-spd. hd, pwr. tbl. feeds, 2-axis D.R.O., pwr. drawbar, coolant, box ways, vise, splash base pan, S/N 61016.

(2) LEES BRADNER MDL. HT 12X102 THREAD MILLER, 24" sw. over bed, 12" sw. over carriage, 102" btwn. cntrs., spndl. spds.: 21–103 RPM, 3 HP mill head, 3 HP hdstk., 15" 3-jaw chuck, milling head, tlstk., coolant, followrest, S/N HT-652, S/N HT-1434.

(2) RIDGID MDL. 535 PIPE THREADERS, 1/8"–2" pipe cap., 1/4"–2" bolt cap., 8" carriage trvl., 3-jaw self-centering chuck, sw.-away 5-flute cone, 1/2 HP, for./rev. switch, foot switch, roll stand, univ. die head, S/N 36149, S/N EC01977. CINCINNATI NO. 520-16 PLAIN HORIZ. MILLING MACHINE, 50" long tbl. trvl., 16" tbl. cross trvl., 20" tbl. vert. trvl., 88" x 16" tbl., (24) spndl. spds.: 16–1,600 RPM, S/N 11A45P1ANE-18.

GUN DRILLS, RADIAL DRILLS & SINGLE SPINDLE DRILLTECHNIDRILL MDL. 200-2.0-48-5A-CNC CNC HORIZ. FLOOR TYPE GUN DRILL, 6-axis CNC ctrl., 0.1875"–2" drill dia. range, 48" Z-axis drill stroke w/(2) whip guides, 146" X-axis column trvl., 36" Y-axis vert. column trvl., 146" x 48" T-slotted set-up tbl., 40,000 lb. cap., (2) spd. ranges: 600–6,000 RPM, 20 HP spndl. mtr., high-flow coolant sys., ABB spndl. drive, (2) 48" sq. pwr. index rot. tbls., chip conv., S/N 7120.

(2) ODESSA 10'-27.5" RADIAL DRILLS, Mdl. 2A587, 3.94" max. drill cap., 19.8"–124" column face to spndl. center, 16.9"–98.4" spndl. nose to base, No. 50 spndl. taper, 24.8" quill trvl., 104" drill head horiz. trvl., 59" arm vert. trvl., 360 deg. arm swvl., (24) spndl. spds.: 8–1,600 RPM, 14.6 HP mtr., pwr. drawbar, box tbl., S/N 283, S/N 284.

CARLTON 10'-26" RADIAL DRILL W/36" EXTRA HEIGHT, Mdl. 5A, drills to cntr. of 240" cir., 26" column dia., (36) spndl. spds.: 12–1,200 RPM, No. 6 MT taper, 8, 11-1/2, 14 and 18, TPI tap leads, 24" vert. spndl. trvl., 16-1/2"–120" spndl. cntr. to column face, 20-1/2"–136" spndl. to base (36" extra), no base at pres., 25 HP, pwr. elev., pwr. clamp, pwr. head trav., S/N 5A3572.

KEARNEY & TRECKER NO. 430TF17 PLAIN HORIZONTAL MILL

CINCINNATI NO. 520-16 PLAIN HORIZONTAL MILLING MACHINE

CARTLON 10' X 26" RADIAL DRILL

<4" DEVLIEG MDL. 43K-48 JIG MILL

>TECHNIDRILL

CNC MDL. 200-2.0-48-5A-CNC

HORIZONTAL FLOOR TYPE

GUN DRILL CNC

8 9

CARLTON 6'-19" RADIAL DRILL, Mdl. 4A, drills to cntr. of 144" circle, 19" column dia., spds.: 15–1,500 RPM, No. 6 MT, 40 HP, pwr. elev., pwr. clamp, pwr. head trav., S/N 4A5911 (Parts Machine).

(2) CINCINNATI BICKFORD 6'-19" TRACK TYPE RADIAL DRILL, spds.: 8–1,000 RPM, (18) spndl. fds.: 0.004–0.125 IPR, 8, 11-1/2, 14, 18, 20 and 27 TPI tap leads, No. MT, 67" x 104" trvlng. base, 20 HP, pwr. elev., pwr. clamp, pwr. head trvl., pwr. traverse to base, S/N 6E949, S/N 6E143.

VANGUARD 6'-17" RADIAL DRILL, Mdl. z3063x20/1, 2.48" max. drill dia., 17"–78" spndl. to column, 15"–63" spndl. nose to tbl., 15" spndl. trvl., No. 5 taper, (16) spndl. spds.: 20–1,600 RPM, 24" x 31" tbl., 61" spndl. HD trvl., 7.4 HP, S/N 0603033.

CINCINNATI BICKFORD 6'-17" RADIAL DRILL W/DBL END BASE, drills to center of 144" cir., spds.: 12–1,500 RPM, No. 6 MT, 11-3/4" min. center, 23-3/8"–83-5/8" spndl. radius, 11-1/2"–72" spndl. dist. to base, 50" x 78" base rt., 50" x 84" base lft., 18" spndl. trvl. 15 HP, pwr. elev., pwr. clamp, coolant pump, rapids, S/N 5E-643.

CINCINNATI BICKFORD 6'-17" RADIAL DRILL, drills to center of 144" cir., (36) spndl. spds.: 12–1,500 RPM, No. 6 MT spndl. taper, (18) spndl. fds., 23-3/8"–83-5/8" spndl. radius, 11-1/2"–72" spndl. to base, 45" x 76" base,18" spndl. trvl. in HD, 20 HP, box tbl., pwr. elev., pwr. clamp, pwr. rapids, coolant pump, S/N 5E675.

VANGUARD 5'-14" RADIAL DRILL, Mdl. Z3050X16, 1.96" max. drill dia., 13"–63" spndl. to column, 12"–48" spndl. nose to tbl., 12" spndl. trvl., No. 5 taper, (16) spndl. spds.: 25–2,000 RPM, 19" x 24" tbl., 49" spndl. HD trvl., 5.4 HP, S/N 05075063.

CINCINNATI GILBERT 4'-11" RADIAL DRILL, drills to center of 96" cir., 11" column dia., (12) spndl. spds.: 33–1,200 RPM, No. 4 MT spndl., 19-1/2"–56-1/2" spndl. radius, 13-1/4"–52-3/4" spndl. to base, 36" x 60" base, 8" base height, 12" spndl. trvl., 5 HP, bolt-on rt. ang. base, 27" x 27" x 23" box tbl., pwr. elev., man. clamp, S/N 6115.

CINCINNATI GILBERT 4'-11" RADIAL DRILL, spds.: 42–1,500 RPM, No. 5 MT, 26" x 26" plain box tbl., pwr. elev., man. clamp, S/N 6159.

CARLTON RADIAL DRILL 4'-9" W/DOUBLE-END BASE, 3 HP, pwr. elev., man. clamp, box tbl., coolant pump, 10" extra column height, tilting clamp fixture, S/N OA 956.

CLEEREMAN SINGLE SPINDLE DRILL, 18" x 36" tbl., 30" tbl. long trvl., 15" cross trvl., (24) spndl. spds.: 25–1,000 RPM, 3-7/8" quill dia., No. 4 MT, 12" spndl. trvl., 25" spndl. to tbl., 14" spndl. to column ways, 5 HP, coolant pump, rapids, drill chuck, S/N EB138.

CLEEREMAN SINGLE SPINDLE LAYOUT DRILL, 18" x 36" tbl., 30" tbl. long trvl., 15" cross trvl., (24) spndl. spds.: 75–1,500 RPM, 3-7/8" quill dia., No. 4 MT, 12" spndl. trvl., 25" spndl. to tbl. 14", spndl. to column ways, 9" sliding HD adj., fds.: 0.001–0.010 IPR, 5 HP, coolant pump, S/N EB220.

HORIZONTAL HONES & VERTICAL HONESBARNES MDL. 5E HORIZONTAL HONE, honing cap. up to 6" dia., 2"–144" adj. stroke (carriage trvl.), 10–100 FPM rate of carriage trvl., vari. spndl. spds.: 50–473 RPM, 24"–144" cap. btwn. cntrs., 15 HP (main drive); 15 HP (hyd.), coolant sys. w/mag. and fabric filters, from U.S. Government reserve, S/N ZP11047.

SUNNEN MDL. MBB-1290D HORIZONTAL HONE, 0.120"–2.625" I.D. dia. cap., 1.875" max. hone length in 0.125" bore, 18" max. hone length in 2.625" bore, 300/450/650/800 RPM spndl. spds., 1.75" tool socket, 12 gal. oil cap., 17" x 24" flow back tray w/splash guards, 0.5 HP, self-energizing spndl. brake, belt driven oil pump, foot pedal, lots of tooling w/cabinet, S/N 17780.

SUPERIOR MODEL 25V72 VERTICAL HONE, 25" honing cap., 72" spndl. stroke, 20" cntr. of spndl. to column face, (3) spndl. spds.: 50–100 RPM, 100–200 RPM, 200–400 RPM, vari. recip-rocating spds., 48" x 48" base work surf., 25 HP, auto./man. hone exp., oper. pushbutton ctrl. station, Barnesdrill mag. and fabric filters (Md. MPE-20), cycle timer, sparkout timer, dwell timer, add feed timer, S/N 8804005.

BARNES MDL. 3010 VERTICAL HONE, 10" honing cap., 35" spndl. stroke, 16-1/8" spndl. cntr. to col. face, (8) spndl. spds., 54–354 RPM, 10–70 FPM recip. spds., 44" x 17" tbl., 10 HP, auto. hone exp., oil filter sys., dwell timer, Barnes disp. media, S/N NP10456.

>4'-11" CINCINNATI GILBERT RADIAL DRILL

BARNES MDL. 5E HONE

FORMAG MDL. RA CNC 100/750 KEYSEATER

DOALL MDL. TF-2021M VERTICAL BANDSAW

BARNES MDL. 3010 VERTICAL HONE

2000

CNC KEYSEATERFROMAG MDL. RA CNC 100/750, Fromag CNC ctrl., 0.118"–3.93" keyway width, 29.52" keyway length, 0.393"–19.68" bore dia., 0 to 787 IPM cut spd., 0 to 1,968 IPM return spd., 40,000 N (Newtons) cutting force, 19.68" x 30.31" tbl., 12.0" tbl. height, 15 HP, hyd. tool retract, cutting oil sys., hyd. sys., tool guide, S/N 46701 ASK3348-4.

THREAD WHIRLING HEADBURGSMULLER TYPE L-3: This unit was specifi-cally constructed for the production of high ac-curacy leadscrews. It may be fitted to any screw cutting lathe or long thread milling machine w/a center height of at least 180 mm above the cross slide surf. 20–140 mm cap., (4) tools, 140 mm bore, max. 20 deg. helix angle, 380–1,220 tool RPM, 180 mm cntr. height, 5.5Kw mtr., (10) die heads, (2) shaft supports w/misc. guide bush-ings, misc. cutting tools, S/N 77-2713.

VERTICAL BANDSAWS(2) DOALL MDL. TF-2021M, cap. @ 0 deg.: 20" x 21" rect., 20" rd., cap. @ 45 deg.: 20" x 14" rect., 14" rd., 21" max. work height cap., 20" throat, 1-1/4" x 192" x 0.042" blade, 40–300 FPM vari., 20" dia. blade whls., 36" x 38" tbl., 45 deg. col-umn tilt L-R, 6,000 lbs. tbl. cap., 20 gal. HPU, 15 GPM pump, 10 HP, vari.-spd., hyd. blade tension, hyd. head tilt, 10-1/2" hyd. vise, coolant system, chip pan, S/N 447-99283 (1999), S/N 447-00290 (2000).

AUTOMATIC HORIZONTAL BANDSAW

DOALL MDL. C-916A, 9" round cap., 9" x 16" rect., 1" x .035" x 159" blade, 105–275 FPM blade spd., hyd. inf. vari. feed cntrl., 14-1/2" whl. dia., 2 HP, adj. guide arms, coolant, piece counter, pwr. roller vise, auto. index to 24", S/N 502-95385.

EXTRUSION MACHINE & FACING MACHINE

NRM MDL. 3.5PMIII 12-1L/D RUBBER BACK FEED EXTRUSION EXTRUDER, 3.5" size, 12:1 I/D, 75 HP, 1,750/2,100 RPM w/vari.-spd. drive, air cooled, single screw type, Hayden Mdl. TT-418 air cooler, 300 PSIG, 2 HP, NRM transmis-sion (S/N T-78035), 100 HP, 1,750 max. RPM, roller spd. oper. ctrl. station, press. meters for head brake, head extend and sensor, elect. panel, oper. ctrl.-stations, mach. mtd. on vari.-spd. trvl. car, (1) extra screw and barrel, remote ctrl. pendant station, air rec. tank, mtr. circuit ctrl. w/(3) temp. zone meters, S/N T78035.

FORNEY MDL. 36 FACING MACHINE, 48" vert. head trvl., 36" cross trvl., 19" head in/out trvl., (6) spds.: 33, 38, 46, 66, 76 and 92 RPM, (6) fds.: .00176, .00356, .00530, .00898, .01797 and .02690, 20/10 HP 2-spd. mtr.

10 11

ROLL GRINDERMESTA 60" X 288" TRAVELING WHEEL TYPE, 40 HP grndng. spndl. mtr., 520–1,040 RPM, 13" tlstk. quill dia., 26'-7" whl. head trvl. (L-R), 28" trvl. in-out, (2) 28" work rests, (2) 18" work rests, 5" wide whl., ball screw on whl. head in-feed, taper grndng., pwr. tlstk., pwr. tlstk. quill, coolant sys., solid state pwr. supply, concave/convex crowning, pendant at oper. pltfrm, spare int. spndl. mtr., S/N 101.

CURVIC COUPLING GRINDER & INTERNAL GRINDERGLEASON CNC CURVIC COUPLING GRINDER, Mdl. 130, 60" max. dia., 50" max. dia. coupling, 0.375" max. full depth, 20 to 360 teeth index range, 10" sliding base trvl., 20.5" dia. spndl. hole, 3.75"–18" machine centerline to spndl. nose, 9"–13-1/4" min./max. point dia. of grndng. whls., 15 HP whl. drive mtr., centrifugal filter, scaven-ger tank, S/N 674302.HEALD MDL. 172 INTERNAL GRINDER, 36" sw. inside chuck guard, 1' to 14" dia. hole grndng. cap., 13" grndng. stroke, 6.25 to 13.5" gap adj., 45" floor. to spndl., 12" dia. workhead spndl. flange, 0–18 FPM tbl. spds., 0–210 RPM workhead spds., 5 HP grndng. spndl., 5 HP workhead mtr., pwr. feed adj., splash/chip guard, S/N 28503.

UNIVERSAL CYLINDRICAL GRINDERSLANDIS 30" X 72", Mdl. 3RH, 30" sw., 72" btwn. cntrs., 14" x 1-1/2" x 5" stand grndng. whl., 180 deg. upper grnd. whl. swvl., 60 deg. CW, 30 deg. CCW lower ginding whl. swvl., 1,720–2,185 RPM whl. spds., 2 to 240 IPM work carriage trav., 15,000 RPM int. spndl. spd., 12 to 360 RPM hdstk. work spds., 120 deg. hdstk .swvl., 6A-2 spndl. nose, 5 HP whl. head mtr., 1-1/2 HP workhead, sw. dwn. int. grndng. spndl., auto. lube, hyd. infeed, coolant sys., S/N 891-45.NORTON 18" X 72", Mdl. U-4, 18" sw., 72" btwn. cntrs., 2–240 IPM tbl. spd., 7 deg. for./2 deg. back tbl. swvl., 14" x 1-1/2" x 5" grndng. whl., 180 deg. whl. head swvl., 360 deg. whl. head ways swvl., 360 deg. hdstk. swvl., D-1-6" hdstk. spndl. nose, 5 HP whl. head, 1 HP workhead, 2 HP I.D. spndl., sw. down I.D. spndl., inf. vari. work spds., auto. lube, hyd. sys., coolant sys., tlstk., work rests, S/N L-2274.

CNC BLADE TIP GRINDERBUTLER NEWALL MDL. BTG4042 HI-SPD CNC BLADE TIP GRINDER, retrofit 2007 w/Fanuc 16I-MB, servos, wiring, PC based ctrl. w/G.E. Fanuc open arch and G.E. Fanuc pendant style pulse gen., 38" sw., 36" max. grndng. dia., 60" max. grndng. length, 60" tbl. stroke, 30" x 2" x 12" grnd. whl., 6,500 SFM whl. spd., 15 HP grnd. whl. mtr., 50 HP work mtr., laser ctrl. feed rate, wet type dust collection sys., Donaldson Torit Mdl. DF02-8 10 HP dry type dust collector, S/N 86BTG4042.

GRINDERSWALTER HELITRONIC MDL. HMC300 UNIVERSAL. CNC TOOL AND CUTTER GRINDER, 5-axis grndr., 600mm X-axis trvl., 270mm Y-axis trvl., 260mm Z-axis trvl., 0.0005 mm resolu-tion, 360 deg. B-axis, 210 deg. (man.) D-axis, palm buttons, sw. arm pendant, mist collector, coolant sys., S/N 4521.

GIDDINGS & LEWIS WINSLOMATIC HC DRILL GRINDER, new 1997, 1/16"–1-1/2" drill dia. cap., 90 to 140 deg. pt. angle, 12" x 3/4" x 5" grndng. whl., 1 HP spndl. mtr., 1/4 HP wrk. head mtr., coolant, S/N 940-715-97.

VERTICAL GRINDERSSPRINGFIELD 36" RAIL TYPE UNIVERSAL VERTICAL GRINDER, Mdl. 2-1/2-ATR, 36" tbl., 50" sw., 21" grndng. head stroke, 36" dist. over tbl., 1–175 RPM spndl. spds., 0–45 deg. head angle, 10 HP whl. spndl., 3 HP hyd., pendant ctrl., coolant pump, rail elev., whl. dresser, S/N 66015.

(2 EA.) SPRINGFIELD VERTICAL GRINDING HEAD SLIDES.

FRAUENTHAL SERIES 1800 VERTICAL GRINDER, rebuilt by Phoenix in 1999, 52" tbl., 65" sw., 72" under rail, 24" spndl. trvl., vari.-spd. tbl., vari.-spd. grndng. spndl., man. pulse gen., pendant ctrl. w/touch screen, servo-driven axes, Barnes coolant sys., Donaldson Torit 15 HP wet type dust collection sys., handles both I.D. and O.D. work, oper. platform, S/N 18-154.

<MESTA 60" X 288" TRAVELING WHEEL TYPE ROLL GRINDER

FRAUENTHAL SERIES 1800 VERTICAL GRINDER

>GLEASON MDL. 130

CNC CURVIC COUPLING GRINDER

BUTLER NEWALL CNC MDL. BTG4042 HI-SPEED BLADE TIP GRINDER

CNC

CNC

RETROFIT

2007

AUCTION: WEDNESDAY, MAY 21 • 9:30 A.M.

100’s OF PRECISON ACCESSORIES! 1,000’s OF PIECES OF TOOLING See Pages 14 & 15

NO CHARGE FOR RIGGING MACHINERY

ONTO CUSTOMER SUPPLIED TRUCKS

10 1184" BLANCHARD ROTARY SURFACE GRINDER 39" SULMECANICA ROTARY SURFACE GRINDER

MATTISON 68" X 320" SURFACE GRINDER PLANER TYPE

36" X 120" MATTISON HYDRAULIC SURFACE (DIE BLOCK) GRINDER

SURFACE GRINDERSMATTISON 68" X 320" SURFACE GRINDER PLANER TYPE, horiz. spndl., recipr. tbl., 68" x 300" tbl. work surf., 320" tbl. trvl., 84" btwn. housings., 60" under whl., 20" x 6" grdng. whl. cap., 55,000 lb. tbl. load, 0–100 FPM tbl. spds., 30 HP, EM chucks, pwr. clamp, pendant ctrl., S/N PG-22.GMP 39.75" X 12.75" HYDRAULIC SURFACE GRINDER, Mdl. 3G1000/400, 39" x 12" tbl. (EM chuck), 39.75" long tbl. trvl., 12.75" cross trvl., 13.7" max. work height, 5.5 HP, over the whl. dresser, incr. downfeed, pwr. whl. elev., lube sys., push button oper. station, S/N 198614.MATTISON 36" X 120" HYDRAULIC SURFACE GRINDER (DIE BLOCK), 36" x 120" tbl., 36" max. grndng. width, 120" max. grndng. length, 36" under grndng. whl., 20" grndng. whl. dia., 6" grndng. whl. width, 75 HP, 24" x 120" electro-mag. chuck, neutrofier, incr. pwr. down feed, pendant, paper filtration, S/N 19746.20" X 144" GALLMEYER & LIVINGSTON MDL. F, 25" under whl., 20" x 6" grndng. wheel cap., (2) 20" x 60" electromagnetic chucks, 30 HP, neutrofier, pwr. elev., coolant, whl. dresser, S/N 2020144.HANCHETT 20" X 96" RECIPROCATING TABLE VERTICAL SPINDLE GRINDER, Mdl. 400, 18" width finished tbl. top, 29" tbl. width overall, 96" tbl. grndng. length, 18" under whl., 22" seg. grndng. whl., 700 RPM spndl. spd., 40 HP, 20" x 96" mag. chuck, coolant sys., rapids, auto. down feed, S/N 40057.MATTISON 18" X 48" HYDRAULIC SURFACE GRINDER, 24" height cap., tbl. feed (vari.), pwr. oper. whl. head, hyd. whl. cross feed, 20" dia. grndng. whl., 3" face, 15 HP, 18" x 48" EM chuck, splash guards, S/N 14326.THOMPSON 12" X 40" HYDRAULIC SURFACE GRINDER, 12" x 40" mag. chuck tbl., 48" tbl. trvl., 16" under whl., 30 HP, push button oper. ctrl. station, splash guards, coolant pump, S/N C555570.VANGUARD 10" X 20" SURFACE GRINDER, Mdl. GM-YGM-Y250, new 2007, 9.84" x 19.68" EM chuck tbl., 19.68" long tbl. trvl., 9.84" cross trvl., 118–984 IPM tbl. spds., 7.87" dia. grndng. whl., 2,850 RPM whl. spd., 2 HP, S/N 087.GALLMEYER & LIVINGSTON 8" X 24" HYDRAULIC SURFACE GRINDER, Mdl. 350, capacities: 8" width/15" height/ 4" length, 29-1/2" long 8" x 24" tbl. surf. pwr. incr. downfeed, pwr. whl. head elev., coolant system, push button ctrl. station, whl. dresser, auto. lube, splash guards, no chuck, S/N 350427.GALLMEYER & LIVINGSTON 8" X 24" HYDRAULIC SURFACE GRINDER, Mdl. 35, 8"W x 24"L x 12"H cap., 8" x 24" magnet, 10" x 1" whl. w/2" hole, 12" whl. to tbl., 2,300 and 3,000 RPM spndl., 3 HP, one-shot lube, coolant pump (no tank), S/N S35-799.BROWN & SHARPE 6" X 18" SURFACE GRINDER, No. 21, 6"W x 18"L x 9.5"H work cap., 18" x 6" work surf. (mag. chuck), 3,200 RPM spndl., auto. long and cross feeds, S/N 523-2-1408.

ROTARY SURFACE GRINDERSBLANCHARD 96" ROTARY SURFACE GRINDER, Mdl. 48-96, 96" dia. mag. chuck, 108" sw., 40" under whl., 48" dia. seg. whl., 150 HP, dry base const., whl. dresser, splash guards, neu-trifier, S/N 10763.BLANCHARD 84" ROTARY SURFACE GRINDER, Mdl. 42-84, 84" tbl., 72" dia. mag. chuck, 86" sw., 18" under new whl., 42" whl., 360 RPM whl. spd., 100 HP, hard bedways, auto. lube, splash guard, whl. dresser, pendant ctrl., S/N 11758.BLANCHARD 84" ROTARY SURFACE GRINDER, Mdl. 42-72, 72" mag. chuck tbl., 84" sw., 18" under whl., 42" whl., 360 RPM whl. spd., 75 HP, pwr. elev., whl. dresser, splash guards, pendant, S/N N/A.BLANCHARD 42" ROTARY SURFACE GRINDER, Mdl. 22AED-42, 42" mag. chuck, 48" max. sw. inside wtr. gaurds, 24" under whl., 22" seg. whl., 720 RPM whl. spd., 50 HP, dry base, splash guard, whl. dresser, auto. lube, S/N 15553.SULMECANICA 39" ROTARY SURFACE GRINDER, Mdl. RAPG-100, 39.4" tbl., 1,700 lb. load, 10, 20 and 30 RPM tbl. spds., 11.8" grndng. height, 19.7" whl. dia., auto. downfeed incr., 60 HP, Marposs Mdl. E5 inprocess gauging, coolant filter sys., mist buster, whl. dresser, S/N 1111.BLANCHARD 36" ROTARY SURFACE GRINDER, Mdl. 20CK-36, 36" mag. chuck tbl., 38" sw. in-side wtr. guards, 12" under whl., 6 chuck spds., 6, 9, 12, 18, 25 and 33 RPM, 20" seg. whl., 3,000 lbs. workload, 720 RPM whl. spd., 40 HP, coolant pump, splash guards, whl. dresser, pwr. whl. elev., S/N 12813.BLANCHARD 36" ROTARY SURFACE GRINDER, Mdl. 18D-36, 36" mag. one-piece chuck, 39" sw. inside wtr. guards, 12" under whl., 6, 9, 12, 18, 25 and 33 RPM chuck spds., 18" whl., 3,000 lb. load cap., 720 RPM whl. spd., 30 HP, whl. dresser, S/N 10461.BLANCHARD 36" ROTARY SURFACE GRINDER, Mdl. 18-.36, 36" mag. chuck, 39" sw. in wtr. gaurds, 12" under whl., 6, 9, 12, 18, 25 and 33 RPM chuck spds., 3,000 lb. load, 720 RPM whl. spd., 25 HP, wet base design, coolant pump, seg. whl., splash gaurds, whl. dresser, S/N 7590.

GRINDER CHUCKS(2) L.W. CHUCK CO. 10-1/2" X 36" EM CHUCKS; (1) 84" DIA.; 3/4" MAG. CHUCK FOR A ROTARY SURFACE GRINDER; (2) 36" X 36" EM CHUCKS; (2) 24" X 60" EM CHUCKS.

VIBRATORY FINISHER, PARTS WASHER, COOLANT FILTRATION SYSTEM, SUCTION PUMPS

& SHOT BLASTERSWECO MDL. FMD-10HA VIBRATORY FINISHER, 10 cu. ft. cap., 2,500 lbs load cap., 44.75" inside bowl dia., 24" max. straight part length, 6" drain dia., 39" floor to top of bowl, 5 HP, ribbed polyurethane liner, ctrl. panel, S/N 10FM-370-23.MAGNUS AEROCLEAN MDL. DN30 PARTS WASHER, 450 lb. load cap., 95 gal. tank, 9 KW heating cap., 30" L-R x 22" F-B x 28" high inside tank dims., 29" x 18" tbl./grate size, 26" tbl./grate vert. trvl., elect. heating, pnuematic tbl. vert. trvl., man. top opening, S/N 51752.POLYCLON MDL. W400-2000 COOLANT FILTRATION SYSTEM, 400 GPM, 2,000 gal. tank, (20) Whirlstream Hydroclone filters, 43" inlet height, 53" under swarf discharge chute, chain type swarf drag out sys., 20 HP main filter pump, 10 HP clean pump, S/N 4865."YELLOW BELLIED SUMP SUCKER" BY MASTER CHEMICAL, Mdl. 275, single comp., 275 gal. tank cap., 5.3 cu. ft. sludge cap., 2" suction hose, 1-1/2" discharge hose, high volume, positive disp. vacuum/press. pump, bottom trap door for sludge removal, tank overfill protection, Kohler gasoline engine, S/N N/A."YELLOW BELLIED SUMP SUCKER" BY MASTER CHEMICAL, Mdl. 175, electric, single compartment, 175 gal. tank, 5.3 cu. ft. sludge cap., 2" suction hose, 1-1/2" discharge hose, high vol.-pos. displ. vac./press. pump, bottom trapdoor for sludge removal, tank overfill protection, 5 HP, S/N N/A.VANGUARD MDL. LP-500 PEDRAIL TUMBLE BLAST MACHINE, new 2007, 1,100 lb. max. load, 66 lb. max. unit weight of workpiece, 3,300–4,400 lb./hr. prod., 16.5" whl. dia., 2,880 RPM whl. spd., overall size of main body: 79"L x 81"W x 179"H, overall size of dust collector: 40"L x 59"W x 128"H, S/N 0611032.

SANDERS(2) SUNDSTRAND HEAVY DUTY BELT SANDERS.PORTABLE BELT SANDER.

12 13

GAP FRAME PRESSES, PRODUCTION PRESSES, STRAIGHTENING PRESS, O.B.I PRESSES, WHEEL PRESSES & PUNCH PRESS

WATSON-STILLMAN 1,500 T. CAP. HYDRAULIC STRAIGHTENING PRESS, trvling. frame, 2-post gantry style, 60 IPM adv. spd., 3.15 IPM pressing spd., 60 IPM return spd., 186 IPM traverse spd., 19 RPM roller, 4.5 FPM bending block, 24" ram stroke, 5"–18" work dia. on bending blocks, 18" post dia., 15" floor to tbl., 13'-1-1/2" max. traverse, 16'-5-1/2" btwn. bending blocks, 35' bed length, dual power bending blocks, dual power rot., oper. station, hyd. unit, S/N 9852.WATSON STILLMAN HYDRAULIC WHEEL PRESS, 20" dia. cyl., 12" stroke, 15 HP hyd. mtr., 10' max. dist. face of ram to strain bar, S/N 9262.PAGE 500 T. CAP. HORIZONTAL WHEEL PRESS.(2) MINSTER 75 T. BACKGEARED GAP FRAME PRESSES, No. 7, 4" stroke, 17.5" shut height (S.D.A.U.), 3.5" slide adj., 37" x 25" bed, 19" x 14" bed open, 32" x 20" slide, 13" throat, 18" back opening width, 50–100 SPM, 33.5" floor to bed, 4.5" T-slot bolster, 15 HP, air clutch and brake, air counterbalance, palm buttons, S/N 26891 w/CWP-712 roll feeder, S/N 7-FB-28007 w/Vamco tTS-6 roll feeder.(2) OAK 100 T. CAP. HIGH-SPEED PRODUCTION PRESSES, 63" x 22-1/2" bed area, 47-1/2" x 30" slide area, 48" L-R btwn. posts, 24" F-B btwn. posts, 6" post dia., 1-5/8" stroke, 16-9/16" S.D.U.A. shut height, 13-9/16" S.D.A.D. shut height, 13-1/2"–18-1/2" crown lift, 80–500 SPM spds., 40 HP, air clutch, Trabon lube, S/N 954, S/N 956.(2) ELKHART 45 T. CAP. SINGLE CRANK GAP FRAME PRESS, Mdl. 45, 3" stroke, 3" slide adj., 28" x 18" bed area, 18" x 12" slide area, 12.375" S.D.A.U., shut height, 7.5" throat depth, 13.75" back opening, 36.5" floor to top of bolster plate, 7.5 HP, air clutch and brake, palm buttons, auto. lube, stroke meter, bed enclosure guards, Wintriss Smart Pac ctrls., PFS Systems-Waddington stock feeder/straightener, S/N 45096004, S/N 45096005.NIAGARA 60 T. CAP. BACKGEARED OBI PRESS, Mdl. AF4, 6" stroke, 11.5" shut height, 3" ram adj., 32" x 21" bed area, 14" x 15.75" ram area, 11" opening thru back, 2" punch shank hole dia., 45 SPM, 5 HP, dual palm buttons, air clutch and brake, 2.25" bolster plate, flywheel and gear guards, S/N 37897.WALSH 65 T. CAP. BACKGEARED O.B.I. PRESS, Mdl. 65S, 6-1/8" stroke, 13" S.D.A.U. shut height, 32" x 18" bed, 14" x 12-1/2" slide, 2-1/2" slide adj., 2-1/2" shank hole dia., 10" throat depth, 16" back opening, 40 SPM, 4" bolster, 5 HP, air act. mech. clutch, knockout slot in slide, pedestal push button ctrl., S/N 6334.WALSH 65 T. CAP. BACKGEARED O.B.I. PRESS, Mdl. 65, 4-1/2" stroke, 11" S.D.A.U. shut height, 32" x 18" bed, 17" x 12-1/2" slide, 2-1/2" slide adj., 2-1/2" shank hole dia., 10" throat depth, 16" back opening, 40 SPM, 4-1/2" bolster, 5 HP, air act. mech. clutch, knockout slot in slide, S/N 11011.WALSH 65 T. CAP. BACKGEARED O.B.I. PRESS, Mdl. 65, 4-7/8" stroke, 11" S.D.A.U. shut height, 34" x 18" bed, 14" x 12-1/2" slide, 2-1/2" slide adj., 2-1/2" shank hole dia., 10" throat depth, 16" back opening, 40 SPM, 1-1/2" bolster, 5 HP, air act. mech. clutch, knockout slot in slide, pedestal push button ctrl., S/N 6608.WALSH 65 T. CAP. BACKGEARED O.B.I. PRESS, Mdl. 65, 4" stroke, 9" S.D.A.U. shut height, 34" x 18" bed, 17" x 12-1/2" slide, 2-1/2" slide adj., 2-1/2" shank hole dia., 10" throat depth, 16" back opening, 40 SPM, 3" bolster, 5 HP, air act. mech. clutch, knockout slot in slide, pedestal push button ctrl., S/N 6954.WALSH 65 T. CAP. BACK GEARED O.B.I. PRESS, Mdl. 65, 4" stroke, 9" S.D.A.U. shut height, 34" x 18" bed, 14" x 12-1/2" slide, 2-1/2" slide adj., 2-1/2" shank hole dia., 10" throat depth, 16" back opening, 40 SPM, 3-1/2" bolster, 5 HP, air act. mech. clutch, knockout slot in slide, pedestal pushbutton ctrl., S/N 5716.KENCO 32 T. CAP. FLYWHEEL TYPE O.B.I. PRESS, Mdl. 32-104, 2" stroke, 12" S.D.A.U. shut height, 22" x 14" bed, 12-1/2" x 9-1/2" ram area, 1-1/2" shank hole dia., 120 SPM, 2-1/2" bolster, 3 HP, S/N 32-40-1006.W.A. WHITNEY 50 T. CAP. MAN. DUPLICATOR PUNCH PRESS, Mdl. 652-50,1.25" dia. in 1/2" steel, 1.75" dia. in 3/8" steel, 3.375" dia. in 1/4" steel, 5" dia. in 3/16" steel, 30" throat, 1/2" punch stroke, 1/4"–2" stroke adj., 20 HP, S/N 652-185-35009.VANGUARD 50 T. CAP. HYDRAULIC H-FRAME PRESS, Mdl. HP50, wrk. tbl. lift dev., S/N 07120481-1A.

POWER SQUARING SHEARS & FOOT SHEARSPACIFIC 20' X 1/2" HYDRAULIC POWER SQUARING SHEAR, Mdl. 500R20, 20' x 1/2" cap. @ 3/8"/ft. rake ang., max. rake ang. 5/8"/ft., 20' x 3/4" shear cap. @ max. rake ang., 1-1/8" x 5" x 244" knife, 20'-3" btwn. housings, 18" throat, 63 T. hold down pressure, 36" tbl. height, 40 HP, 48" pwr. backgauge, auto. lube, foot switch, S/N S10468.CINCINNATI 12' X 3/4" POWER SQUARING SHEAR, Mdl. 6212, 144" width cap., 3/4" thickness cap., 12'-3" btwn. housings, 30 SPM, 600 RPM flywheel, 65" frt. gauge range, 36" backgauge range, 18" throat, 39 T. holddown press., 1.5" x 5.5" four-edge knives, 32" tbl. height, 20" below floor, 12'-5" knives, 30 HP, frt. oper. pwr. backgauge, 12' sq. arm, extra set knives, S/N 28239.PACIFIC 10' X 3/4" HYDRAULIC POWER SQUARING SHEAR, Mdl. 750-S10A, 10' x 3/4" @ 1/2" per ft. rake angle, 10' x 1" at 3/4" per ft. rake angle, 124" knives length, 10'-3" btwn. housings, 18" gap, (11) hold-downs, 33 T. hold-down press., 40 HP, frt. oper. pwr. backgauge, adj. stroke length, adj. rake angle, adj. knife clearance, squaring arm, S/N 10141.PACIFIC 12' X 3/8" HYDRAULIC POWER SQUARING SHEAR, Mdl. 375R12, 12' x 3/8" at 5/16"/ft. rake angle (mild steel), 1/2"/ft. max. rake angle, 12' x 1/2" shear cap. @ max. rake, 12'-3" btwn. housings, 18" throat, (14) hold-downs, 32 T. hold-down press, 36" frt oper. pwr. backguage, 34-3/4" tbl. height, 1" x 4" x 148" knife, 30 HP, sq. arm, (2) front suppt. arms, extra set knives, foot switch, pwr. rake ang. adj., stroke ctrl. adj., ball transfers in bed, knife clearance adj., knife and hold-down guard, S/N S10597.JET 16 GA. X 52" FOOT SHEAR, 16 ga. shear cap. mild steel, 52" shear length, can be used on aluminum, brass, copper, lead, plastic and zinc, S/N 29061.

HYDRAULIC PRESSBRAKES & MECHANICAL PRESSBRAKESCINCINNATI 350 T. CAP. HYDRAULIC PRESSBRAKE, Mdl. 350CB, 1/2 x 10' bend cap. (mild steel), 12' die space, 10'-6" btwn. housings, 10" stroke, 10" throat, 18" open height, 8" closed height, 65 inches per minute rapid adv., 33 IPM fast press, 9 IPM full tonnage press, 67 IPM return, 35 HP, S/N 42965.CINCINNATI 175 T. CAP. HYDRAULIC PRESSBRAKE, Mdl. 175CB-10, 1/4" x 10' bend cap. mild stl., 12'-0" die space, 10'-6" btwn. housings, 10" stroke, 8" throat, 17" open height, 7" closed height, 132 inches per minute rapid, 65 IPM fast press, 18 IPM full ton press, 127 IPM return, 30 HP, Automec CNC 150/G24 bkgge, flush floor mnt, palm button oper. station, foot pedal, auto. lube, S/N 48546.CINCINNATI 225 T. CAP. MECHANICAL PRESSBRAKE, Series 13-10, 135 T. to 145 T. cap. mid stroke, 225 T. to 250 T. cap. full stroke, 16'-8" bed and ram, 10'-6" btwn. housings, 0.5" x 8' bend cap., 7" stroke length, 6" ram adj., 10" throat, 12" S.D.A.U. shut height, 30 SPM, 20 HP, power ram adj., mech. brake and clutch, top sect. clamps, 34" deep pit req., S/N 29045.DREIS & KRUMP 6' X 12 GA. BOX AND PAN BRAKE, Mdl. BPO-612-6, S/N 310168.

OAK 100 T. HIGH-SPEED PRODUCTION PRESS

ELKHART MDL. 45 SINGLE CRANK GAP FRAME PRESS

>WATSON-STILLMAN 1,500 T. HYDRAULIC

STRAIGHTENING PRESS

350 T. CINCINNATI MDL. 350CB HYDRAULIC PRESS BRAKE

WATSON-STILLMAN HYDRAULIC WHEEL PRESS

NO CHARGE FOR RIGGING MACHINERY

ONTO CUSTOMER SUPPLIED TRUCKS

12 13

<19' X 19' VANGUARD MDL. LHW6X6 WELDING MANIPULATOR

AMERICAN EAGLE 1,100 LB. WELDING POSITIONER

UNIVERSAL IRONWORKERBUFFALO NO. 1-1/2, 65 T. cap. ram press, 44 SPM, 24" throat, shear, 6" x 3/4" cap., 12" knives length, punch, 1-1/16" x 3/4" cap., bar cutter, notcher, 90 deg. on punch end, sq. on shear end, one-shot lube, 3 HP, S/N 52Z0621.

TUBE BENDERS & PLATE BENDING ROLLSCOAST 14" HYDRAULIC TUBE BENDER, clockwise bend rot., 14 IPS Sched. 40 bend cap., 12 IPS Sched. 80 bend cap., 0–195 deg. bends, 0.57 RPM bend spd., 100 HP, 3,000 PSI max. pres-sure, Accu-Bend digital ctrl., oper. console, misc. tooling inc., mach. disassembled, S/N 135.LOT OF BENDER TOOLING (FOR COAST BENDER): 5" dia. 180 deg. bend die 18"/20" radius, 6.75"–7" dia. 180 deg. bend die 18" radius, 7.5" dia. 180 deg. bend die 30"/32" radius, 9" dia. 180 deg. bend die 36" radius.BERTSCH 6' X 1-1/8" INITIAL PINCH PLATE BENDING ROLL, Mdl. 14, 3-roll design, 6' x 1-1/8" cap. boiler duty, 6' x 29/32" cap. pipe duty, 14" lower rolls dia., 13" top roll dia., 6'-2" rolls length, 6'-7' btwn. frames, 30 HP main, 20 HP rear roll, hyd. drop end, for./rev. lever, foot pedal, oper. ctrl. station, roll pos. indicators, S/N M-10123.TENNSMITH 4' X 16 GA. HAND OPERATED BENDING ROLL, Mdl. SR48, 16 ga. cap. (mild steel), 49" max. forming length, 3" dia. rolls, 1-1/2" min. forming radius, 3/8", 1/2", and 5/8" wire grooves, 4:1 gearing ratio, turned, grooved and polished rolls, scales, wide clearance top roll latch, stand, S/N 1185.

WELDING POSITIONERS, WELDING MANIPULATORS, WELDING TURNING ROLLS, SEAM WELDER & ROBOTIC WELDER

AMERICAN EAGLE 1,100 LB. CAP. WELDING POSITIONER, Mdl. 300-60, 1,100 lbs. @ 12" C.G., 660 lbs. @ 24" C.G. 471 lbs. @ 36" C.G., 367 lbs. @ 48" C.G., 300 lbs. @ 60" C.G., 36" dia. tbl., 0–135 deg. tilt, pwr. rot., pwr. tilt, 3-jaw gripper chuck (Pandjiris), vari.-spd., hyd. drive, pendant, foot pedal, S/N 0011189RCFS.AMERICAN EAGLE 1,100 LB. CAP. WELDING POSITIONER, Mdl. AE-10, 1,100 lbs. @ 12" C.G., 660 lbs. @ 24" C.G., 471 lbs. @ 36" C.G., 367 lbs. @ 48" C.G., 300 lbs. @ 60" C.G. 30" dia. tbl., 0–135 deg. tilt, pwr. rot., pwr. tilt, 3-jaw chuck, vari.-spd., hyd. drive, pendant, foot pedal, S/N 002AE101189.RANSOME 2,500 LB. CAP., Mdl. 25P, wld. pos., 2,500 lbs. @ 6" C.G. 32" tbl., (4) slots, 2-7/8" pilot hole, 0 to 135 deg. pwr. tilt, pwr. rot., 3-jaw gripper chuck, man. height adj., ft pdl, S/N 1623890.PANDJIRIS 8' X 8' WELDING MANIPULATOR, 8' vert. trvl., 8' horiz. trvl., 360 deg. column rot., 1/3 HP, pendant ctrl., rapids, 144" height x 96"W, S/N 400-8357/800-8249-4.PANDJIRIS 17' X 21' WELDING MANIPULATOR, Mdl. 1600, 17' vert. trvl., 21' horiz. trvl., pwr. trvl. car, pwr. column rot., S/N 400-2650.

VANGUARD 19' X 19' WELDING MANIPULATOR, Mdl. LHW6X6, 19' vert. trvl., 19' horiz. trvl., 180 deg. column rot., 56"–291" boom height frm. floor, 49"–283" boom ext. frm. column, pwr. trvl. car base, 20' rail for trvl. car, (2) Lincoln DC-600, (2) Lincoln NA-3 ctrls., (1) flux rec., misc. ctrl. cables, weld cables, pendant ctrl., S/N 5608059.VANGUARD 5 T. CAP. TURNING ROLLS, Mdl. R5-BA, 11,000 lb. load, 6"–110" dia. cap., 4–40 IPM linear whl. spd., vari. freq. drv., (2) 1/2 HP mtrs., rubber whls., remote, foot pdl., S/N W1455001.1 T. CAP. TANK TURNING ROLLS DRIVE, (3) idler roll sets.(LOT) MISC WELDING IDLER TURNING ROLLS.AIRLINE (JETLINE) MDL. LW10313 AUTOMATED LONGITUDINAL SEAM WELDER, 72" max. welding length, 0.020"–0.250" thickness, 6"–42" dia., Jetline Series 9500 system controller, Jetline auto. arc length ctrl., Jetline digital cold wire feeder, pwr. supply not included, S/N 1082.FANUC ARC MATE 120 ROBOT WELDER, Mdl. A05B-1208-B201, 6-axis, mod. const. elect. servo-driven robot designed for precision high-spd. welding and cutting, axis 1–330 deg./135 deg./sec., axis 2–265 deg./120 deg./sec., axis 3–450 deg./135 deg./sec., axis 4–380 deg./240 deg./sec., axis 5–280 deg./240 deg./sec., axis 6–540 deg./400 deg./sec., 26.4 lbs. wrist load cap., 44 lbs. axis 3-load cap., 88 lbs. axis 2-load cap., Fanuc R-J2 cab., electric servo drives, mtd. on Preston Easton RTT-20 robotic transporter, S/N R95776595.LEPEL MDL. T-5-3-KC-SW HI FREQ. IND. WLDR, S/N 7106-A.(3) PC. MATHEY-DEARMAN PIPE SADDLE CUTTERS.

FURNACES & OVENSK.H. HUPPERT TYPE ST STYLE 20CHT FURNACE, 2,000 deg. max. oper. temp., 14"W x 12"H x 45"D chamber, 440v/3p, 35 KW, S/N 26.K.H. HUPPERT TYPE ST STYLE 19CHT FURNACE, 2,000 deg. max. oper. Temp., 14"W x 12"H x 45"D chamber, 440v/3p, 35 KW, S/N 29.DESPATCH MDL. RS-1 ELECTRIC OVEN, 500 deg. max. temp., (3) adj. shelves, 24" x 48" x 36" depth int. dim., 220v/3p, 7 KW, contents not inc., S/N 71062.BLUE M MDL. OV-12A OVEN.

INSPECTION EQUIPMENTCUSTOM 6,000 AMP MAG. PARTICLE INSPECTION UNIT, M-530 pwr. sply, AC or HWDC current, 17 volts output, inf. vari. current ctrl., 6,000 amps AC/HWDC max. out-put, 225 amps at 460 volts line current, H.D. copper lug connectors, set current w/pwr. pak dial or rem. dial, (2) HD castors and (2) swvl. castors, S/N 781527.VARIAN MDL. 936-70SP MASS SPECTROMETER LEAK DETECTOR., S/N 67E-002.

6' X 1-1/8" BERTSCH MDL. 14 INITIAL PINCH PLATE BENDING ROLL

5 T. VANGUARD MDL. R5-BA TURNING ROLLS

FANUC ARC MATE 120 MDL. A05B-1208-B201 ROBOT WELDER

14" COAST HYDRAULIC TUBE BENDER

NEW

On-Site Bidding in Houston, Texas or Bid Via Webcast at

2008

14 15

96" FARMINGTON AIR LIFT ROTARY TABLE

MISCELLANEOUS MACHINES & EQUIPMENTDUMORE NO. 2 VERSA-MILL PORTABLE MACHINE UNIT, tool, 6" vert. trvl., No. 3 MT spndl., spds.: 44–450 RPM, 2 HP, high-spd. head, univ. head, Versa shaper, Versa grndr., misc. grndng. whls., roll-around stor. cab., S/N 8267-1407.

GILMORE MODEL A-1 PRECISION PORTABLE GRINDER, S/N 262.

GIDDINGS & LEWIS OUTBOARD SUPPORT FOR MODEL 780F HBM.

ANGLE PLATE 160"W X 120"H X 62"D: (2) 80" x 120" x 62" plates tacked together, 2" thck. plate, can be flipped on its back (160" x 120" x 62" ht.)

V-BLOCKS, (1) set of 2, 84" wide x 77" high x 24", 50" base to bottom of V-way, 76-1/2" base to top of V-way, 26-1/2" V-way depth, 78-1/4" max. V-way opening, 84" x 30" x 1" thck. base, lifting holes, custom fab., S/N N/A.

BALANCING MACHINESSTEWART WARNER MDL. 2010, horiz., belt driven, 10,000 lb. cap., 68" work dia., 208" work length, 48" max. dia. drive cap., 10-1/2" max. Trunnion dia. cap., 10 HP, (2) stands, walking mechanisms on left column, right col-umn and drive tower, S/N N/A.

SCHENCK, (see catalog for additional information).

FLOOR TABLES, FLOOR PLATES & ROTARY TABLESGIDDINGS & LEWIS 120" X 120" POWER ROTARY TABLE W/INFEED, 50 T. tbl. load, (9) T-slots, 48" tbl. height, 144" runway length, 48" tbl. trvl. on bed, 84" bed width, 1/2 deg. graduations, 10 HP AC feed and rapid traverse., hand crank for fine feed and adj., portable pushbutton-station, S/N N/A.

FARMINGTON 96" AIR LIFT ROTARY TABLE, 50 T. tbl. load, 22-1/2" tbl. height, (12) T-slots, motorized rotation, air bearing lift, pwr. clamp, S/N DR-96-173-6714.

GIDDINGS & LEWIS 48" X 72" AIR LIFT ROTARY TABLE, 48" x 72" work surface, 48" x 52" base, 25,000 lb. load, 6 T-slots, 7/8" width, on 7-1/2" cntrs., 1/2 deg. tbl. scare increments, 15-1/2" tbl. height, S/N 450-2228-98.

LUCAS 48" X 72" AIR LIFT ROTARY TABLE, (6) T-slots on 7" cntrs., 27,000 lb. load, 360 deg. scale in 1/2 deg. increments, (4) lock positions @ 90 deg., 12" base to top, air lift, manual clamping, S/N 48BP0110.

LUCAS 48" X 60" AIR LIFT ROTARY TABLE, (6) T-slots on 7" cntr. lines, 27,000 lb. tbl. load, 360 deg. rotation. in 1/2 deg. increments, (4) lock bolt positions @ 90 deg. 12" base to top, air lift, manual clamp, 6,500 lbs. approx. weight, S/N 48BPO423.

GIDDINGS & LEWIS 60" X 60" MANUAL ROTARY TABLE, (6) T-slots (1" wide, 10" cntr. line), 12" tbl. height, 360 deg. rotation, 1/2 deg. increments, 5,600 lbs., S/N A2340.

LUCAS 36" X 60" AIR LIFT ROTARY TABLE, (6) T-slots on 4-1/2" cntr. lines, 16,000 lb. tbl. load, 360 deg. rotation in 1/2 deg. increments, (4) lock bolt positions @ 90 deg., 9-3/4" base to top, air lift, manual clamp, 5,000 lbs. approx. weight, S/N 36BPO459.

8' X 12' X 12" THICK FLOOR PLATE, (12) T-slots on 7-1/2" cntrs., flanged base w/hold-down holes and threaded jack bolt holes.

PRODUCTO 36" NC ROTARY TABLE, Mdl. 874-23, 36" tbl. dia., (8) T-slots, 4" tbl. over hang from base, 4 RPM max. spd., 12" bottom of base to tbl. top, 46" L-R x 36" F-B x 12" height, S/N 0130 (Miss-ing servo motor).

DEVLIEG 26" X 26" AIR LIFT ROTARY TABLE, (6) T-slots 3/4" width on 4" cntr. lines, 6-3/4" base to top, 360 deg. in 1 deg. increments, S/N 937471.

30" 3-JAW INDEXING CHUCK.

24" VERTICAL INDEXER w/24" 4-jaw chuck.

BROWN & SHARPE GRANITE SURFACE PLATE, 60" x 48" x 8" thck., Grade A w/stand, S/N 20195A.

TROYKE 20" 4TH AXIS ROTARY TABLE, Mdl. NC20b, 16" 3-jaw chuck, S/N 3944-10.

TROYKE 20" 4TH AXIS ROTARY TABLE, Mdl. NC20b, 16" 3-jaw chuck, S/N N/A.

HIGH PERFORMANCE MACHINE CO. 18" NC ROTARY TABLE, 18" tbl. dia., (4) T-slots, horiz. or vert. pos., 14" (horiz.) base bottom to tbl. top, 10" (vert.) base bottom to tbl. cntr., Gould servo mtr., 37" L-R x 20" F-B x 14" high, S/N 52268.

TROYKE 18" HORIZ./VERT.L ROTARY TABLE, Mdl. U-18, S/N 3918-1.

ROTAB 36" TILTING ROTARY TABLE, 36" dia. tbl., 2-3/4" tbl. thickness, (8) T-slots, 14-3/4" cntrs., 360 deg. rot., 90 deg. tbl. tilt, 20-1/2" floor to tbl. center (vert. pos.), 20" x 26-1/2" base, all man. oper., (2) lifting eye holes, S/N N/A.

24" VERT. INDEXER.

64" POWERED ROTARY TABLE.

GIDDINGS & LEWIS 48" X 48" AIR LIFT ROTARY TABLE, 30,000 lb. load, (6) T-slots on 7-1/2" center-line, 9-1/2" height, 360 deg. tot. in 1/2 deg., S/N 040-622-63.

HPM 44" CNC ROTARY TABLE, Mdl. 7388, 44" tbl. dia., (8) T-slots, 17-3/4" tbl. height, Gettys mtr., S/N 78104.

8'-6" X 15' X 12" FLOOR PLATE, (5) T-slots on 19-1/2" cntrs., mntd. on (6) support legs, 60" height, S/N N/A.

5' X 10' FLOOR PLATES, (4) plates to make one 10' x 20' section.

8' X 20' X 12" FLOOR PLATE, (7) T-slots on 12" cntrs., S/N N/A.

HOFMANN TRUNION TYPE 31.5" TILTING ROTARY TABLE, 31.5" tbl. dia., 23.6" height, 0–90 deg. tilt, 1:180 rot. gear ratio, 1:90 tilt gear ratio, tilt clamp, man. tilt, hndwhl. rot., S/N 8211.

FACING HEADS & MILLING HEADSGIDDINGS & LEWIS 60" FACING HEAD, Type 60" CFFH, 60" head dia., 34-tool slide cross trvl., 94" max. facing dia., 50 RPM, 0.003 to 0.039 IPR feeds, 3,000 lbs.

GIDDINGS & LEWIS 30" FACING HEAD, Type 30" CFFH, 30" head dia., 6" thk., 6" hole, 14" tool slide cross trvl., 44" max. facing dia., 140 max. RPM, 0.003 to 0.039 IPR feeds, (2) 3/4" T-slots on 8-1/2" cntrs., univ. hand whl. mounts on any mach. w/6" dia. spndl. toolholder, S/N 307-60103.

GIDDINGS & LEWIS 30" FACING HEAD Mdl. CFF30, S/N 307-70524.

GIDDINGS & LEWIS 26" FACING HEAD.

TOS 21" FACING HEAD.

YANCY MDL. YM-200 MILLING HEAD, No. 50 taper, (10) spndl. spds.: 65–1,800 RPM. 10 HP (1,720 RPM), 41" x 31" x 18", S/N M-34.

YANCY MDL. YM-400 MILLING HEAD, No. 50 taper, (10) spndl. spds.: 75–1,200 RPM, 10 HP (1,740 RPM), 41" x 31" x 18", S/N M-157.

STORAGE SYSTEMS, BLAST ROOM & PORTABLE OFFICESTORAGE RACKS, (6) 3-tier racks, 500 lbs. per rack (unused), 61" L-R x 57" F-B x 47" height, (4) 2-tier racks, 1,000 lbs. per rack, 53" L-R x 44" F-B x 68" height.

(2) 30"W X 44"H X 28" W/(3) SHELVES EA.; (1) 30"W X 44"H X 28" DP W/(5) DRAWERS; (1) 45"W X 44"H X 28"D W/(7) DRAWERS; (2) 60"W X 44"H X 28"D W/(3) DRAWERS.

SCHMIDT 12' X 12' X 12' BLAST ROOM.

20' PORTABLE OFFICE BUILDING (Converted 20' shipping container).

31.5" HOFMANN TRUNION TYPE TILT ROTARY TABLE

GIDDINGS & LEWIS 48" X 72" AIR LIFT ROTARY TABLE

26" X 26" DEVLIEG AIR LIFT ROTARY TABLE

GIDDINGS & LEWIS 120" X 120" POWER ROTARY TABLE WITH INFEED

14 15

TAYLOR 30,000 LB. BOOM LIFT 30 T. LANDEL DOUBLE GIRDER OVERHEAD BRIDGE CRANE

>GROVE 50 T.

ROUGH TERRAIN MOBILE CRANE

CHUCKS56" 3-JAW FLAT CHUCK, 19-1/2" hole, 2-piece jaws; BULLARD 92" 4-JAW CHUCK; (2) GIDDINGS & LEWIS 42" 4-JAW COMBINATION/INDEPENDENT CHUCKS; CUSHMAN 32" 4-JAW A-20 CHUCK, 12-1/2" hole, 2-piece serrated; TITAN 57" 4-JAW MANUAL CHUCK; CUSHMAN 24" 3-JAW A-11POWER WRENCH CHUCK, 6-3/4" hole, 2-piece serrated jaws; (2) BULLARD 36" 3-JAW CHUCKS; CUSHMAN 24" 4-JAW A-15, 9-1/2" hole and 2-piece jaws; 32" 3-JAW POWER CHUCK; 48" 4-JAW VTL CHUCK; 42" 4-JAW VTL CHUCK; (9) MISC. INDEXING CHUCKS; (8) 18" 3-JAW CHUCKS; MANY MANY MORE CHUCKS–150+.

LATHE STEADYRESTS(2) OMNIREST FOR WARNER & SWASEY MDL. 5A,.SMW STEADYREST FOR WARNER & SWASEY MDL. SC-32.

MISCELLANEOUS TOOLING & BORING BARSMISC. TOOLING & TOOL CABINETS; MISC. TOOLING; BORING BARS: (2) 6" X 20', (1) 5" X 15' No. 50 TPR; G&L NO. 60 TPR MILL TOOLING (21 PIECES).GUN DRILLS AND SLEEVES.

SHOP TABLES & COIL CRADLES(4) H.D. TABLES w/straightener and light fixture.KEMPLER 3,000 LB. CAP. COIL CRADLE & STRAIGHTENER, Mdl. 810, 3,000 lbs. wt. cap., 48" max. O.D., 18" max. width, S/N ACC-24-6.LITTLE 2,000 LB. CAP. COIL CRADLE, Mdl. CC20-20, 40" max. O.D., 20" max. width, 2 HP, S/N 50086-53-2.ROWE 2,000 LB. CAP. COIL CRADLE, Mdl. 2010J-PR, 40" max. O.D., 84 FPM feed rate, 3/4 HP, S/N 18004.ROWE 2,000 LB. CAP. COIL CRADLE, Mdl. 2010-PR, 40" max. O.D., 84 FPM feed rate, 3/4 HP, S/N 11647.ROWE 1,200 LB. CAP. COIL CRADLE, Mdl. 810, 36" max. O.D., 90 FPM feed rate, 1/2 HP, S/N 8357.

AIR COMPRESSORSSPEEDWAY, portable, single-phase, tank mtd.SPEEDAIRE, 3 HP, 230/460v, tank mtd.SPEEDAIRE, portable, 2 HP, single-phase, tank mtd.

RANDOM CASE SEALER3M-MATIC MDL. 77R-KS, (2) 3" top and bot. tape hds., auto. adj. for height and width, top and bot. belt drives, 6" x 6" x 4.75" high min. box size, 5 lb. min. box wt., unlimted length x 20.5" x 20" high max. box size, 85 lb. max. box wt., (12) boxes per min. spd., 115v, single-phase, S/N 5394.

TRANSFER CARS25'L X 6'W X 2' H.CRANE MFG. 75 T. CAP. POWER TRANSFER CAR, 8' x 13' load platform, LPG engine w/generator.

OVERHEAD CRANES, MOBILE CRANES & SHOP CRANEP&H 150/50 T. CAP. OVERHEAD BRIDGE CRANE, double girder, 150 T. main/50 T. aux. cap., 86' span, 53' lift height, 7'-3" min. dist. btwn. hooks, 42" dia. x 126" long main hoist drum, 125 HP main mtr., 75" center–center of whls., lft. S/N C14311/C18851.LANDEL 30 T. CAP. DOUBLE GIRDER OVERHEAD BRIDGE CRANE, 57'-0" bridge span, 36'-0" lift height, 150 FPM bridge spd., 50 FPM trolley spd., 11 FPM hoist spd., 12'-3" end truck whl. base, 6'-8" trolley whl. base, 25 HP hoist, 7-1/2 HP bridge, 2 HP trolley, S/N A361.GROVE 50 T. CAP. HYDRAULIC ROUGH TERRAIN MOBILE CRANE, 3-sect. hyd. boom, 50 T. @ 10 ft. cap., 34 to 84 ft. boom length,150" whl. base, double box beam and jack outriggers, 23'-3" turning cir. (4-whl. steer), Caterpillar 3208 diesel engine, 4-whl. drive, 4-whl. steer, encl. cab, S/N 44625.GALION 15 T. CAP. HYDRAULIC MOBILE CRANE, Mdl. 150A, 4-section power boom, 15 T. @ 10' rated cap., 60' boom length, 360 deg. boom rot., pneu. tires, 136" lowered height, GM diesel engine, outriggers, S/N 1404-3033.RUGER 6,000 LB. PORTABLE SHOP CRANE, Mdl. HP-3, 88" base length, 48" width, 82" height, 37" btwn. legs, 66"–107" boom reach, 39"–130" boom height, 10"–157" ext. boom height, 8" leg height, 8" dia. load whls., 6" dia. steering whls., ext. boom, pwr. pac, S/N 72G13440.SEVERAL JIB CRANES UP TO 3 T.

CRANE MAGNETS, WINCH & HOISTSNATIONAL 58" ELECTRIC CRANE MAGNET.NATIONAL 18" ELECTRIC CRANE MAGNET.INGERSOLL RAND MDL. HUR01 H.D. PNEUMATIC CABLE WINCH.(2) BUDGIT 1 T. CAP. ELECTRIC HOISTS.(2) COFFING 1 T. CAP. ELECTRIC HOISTS.

FORKLIFTS, BOOM LIFT & AERIAL LIFTTAYLOR 30,000 LB. CAP. BOOM LIFT, 80"L boom, 2-stage mast, 41"W boom, 144" lowered height, pneu. rear tires, hard front tires, dual front axle, gas engine, S/N N/A.TCM 3,650 LB. CAP. ELECTRIC FORKLIFT, Mdl. FCB20E3, 3,650 lbs. @ 24" L.C, 189" lift height, 80" lowered height, 42" fork length, 8"–36" fork spacing, 3-stage mast, 36v sys., hard tires, overhead guard, fork guard, side shift, battery charger, S/N A72F00493.TOYOTA 3,000 LB. CAP. FORKLIFT, Mdl. 42-3FGC15, 3,000 lbs. @ 24" L.C., 130" max. lift height, 42" fork length, 82" lowered height, 8"–32" fork spacing, 2-stage mast, fork guard, hard tires, LP gas, overhead guard, S/N 403FGC15-10524.GROVE MDL. AMZ66 AERIAL WORK PLATFORM, 35" x 60" platform, 60' height, 500 lb. cap., articulating telescopic boom, 15" x 19.5" tires, 3.5 RPM spd., 101" lowered height, Deutz diesel engine, 2-whl. drive, 4-whl. steer, hyd. pltfrm. rot., rough terrian tires, side oper. ctrl. station, pltfrm. oper. ctrl. station, foot pedal, S/N 24850.

SPREADER BARS85,000 LB. CAP. SPREADER BAR (2 PIECES); 40 T. CAP. SPREADER BAR; 20 T. CAP. SPREADER BAR.

INSPECTION: Tuesday, May 20, 9:00 A.M. to 4:00 P.M. & Morning of Sale

TREMENDOUS OFFERING OF CHIP MAKING &

FABRICATING MACHINE TOOLS, PRECISION

ACCESSORIES & TOOLINGAt the Premises

14309 Sommermeyer StreetHOUSTON, TEXAS 77041

(See Directions on Back Page)

AUCTION: WEDNESDAY, MAY 21 • 9:30 A.M.

AUCTION

On-Site Bidding in Houston, Texas or Bid Via Webcast at

QS-0021408

P.O. Box 19100Houston, TX 77224-9100

DATED MATERIAL – PLEASE DELIVER

BUILDING LEASED & MUST BE VACATED

BY JULY 31CONTENTS MUST BE

SOLD(200+) CNC & Manual Large Capacity Machine Tools, (35+) Major Items of Fabricating Equip., (30+) Grinders, Furnaces, Q.C., (25+) Rotary Tables, Pallets of Tooling, (50+) Chucks up to

92" dia., Overhead Cranes, Hyd. Cranes, Forklifts to 30,000-Lb. & More

HOUSTON, TEXAS

AUCTION

DIRECTIONS & LODGINGFROM HOUSTON’S GEORGE BUSH INT’L AIRPORT: Exit the air-port heading south on JFK Blvd. Proceed to Beltway 8. Turn right (west) onto the Beltway 8 frontage road and enter the Beltway. As you proceed on the beltway westward it will become the Sam Houston Toll Rd. Take the Toll Rd. counterclockwise around the city to the exit for Texas Hwy. 290 on the west side of town. Enter Hwy. 290 East/Downtown and proceed to the very next exit for Fairbanks N. Houston Rd. Turn right (south) onto Fairbanks N. Houston Rd. and proceed to W. Tidwell Rd. Then turn right onto W Tidwell Rd. and proceed to Hempstead Rd. Turn right onto Hempstead Rd. and proceed to the traffic light at Campbell Rd. Turn left (south) onto Campbell Rd., cross railroad tracks and immediately turn right onto Sommermeyer. Proceed to the stor-age facility ahead on your left. Watch for the auction signs.COMFORT INN ........................................................(713) 690-1493 Hwy. 290/NW, 7887 W. Tidwell, Houston, Texas

PUBLIC INVITEDAUCTION: WED., MAY 21 • 9:30 A.M.

PresortedFirst Class Mail

U.S. PostagePAID

Eugene, OregonPermit No. 17

ATTENTION: PLANT MANAGEROR EQUIPMENT BUYER

ASSOCIATION OFMACHINERY AND

EQUIPMENT APPRAISERS

NO CHARGE FOR RIGGING MACHINERY ONTO CUSTOMER SUPPLIED TRUCKS.

A 15% Buyer’s Premium Will Apply On-site. A 18% Buyer’s Premium Will Apply to Webcast Bids. See Above Rules for Participation.Everything will be sold to the highest bidder or bidders for cash in accordance with the auctioneer’s Customary Terms of Sale, copies of which will be posted on the premises.ALL PAYMENTS MUST BE MADE BY CASH, CASHIER’S CHECK, WIRE TRANSFER OR COMPANY CHECK WITH BANK LETTER GUARANTEEING PAYMENT TO PLANT & MACHINERY INC.Here is an example of what your letter should be: Mr. “Customer Name” is a customer of this bank. This bank will guarantee unqualified payment to PMI on the account listed herein up to the amount of $___________. This letter is good until June 20, 2014.In default of payment of bills in full within the time therein specified, the Auctioneer in addition to all other remedies allowed by law, may retain all monies received as de-posit or otherwise, as liquidated damages. All items must be removed by the time announced at the start of the sale.Lots not paid for and/or removed within the time allowed may be resold at public or private sale without further notice, and any deficiency, together with all expenses and charge of resale, will be charged to the defaulting purchaser.The buyer acknowledges that he or an agent has inspected all of the assets upon which he will be bidding and/or does purchase.

Buyer agrees to accept assets purchased “AS IS,” “WITH ALL FAULTS” and “WITH REMOVAL AT BUYER’S RISK AND EXPENSE.” THE AUCTIONEER EXPRESSLY DISCLAIMS ON THE PART OF THE AUCTIONEER AS AGENT AND THE SELLER, ANY WARRANTY AS TO FITNESS OR USABILITY OF ALL THE ASSETS, AND THE BUYER EXPRESSLY WAIVES ANY CLAIM IN RESPECT TO ANY POSSIBLE FUTURE USE OF ANY ASSET PURCHASED FOR ANY PURPOSE WHATSOEVER.

The buyer does hereby assume and does agree to indemnify and hold the auction-eer harmless from any future claim which shall pertain to the fitness or use of that asset as being purchased. Riggers, movers, electricians and buyers performing work at the Auction Site must provide PMI with evidence of insurance. The insurance coverage must be at a level acceptable to PMI and to the seller. PMI reserves the right to withdraw items, alter the order of the sale, accept bids from the seller, and group lots as it may deem appropriate. This auction may include consignment items.

Although all information has been obtained from sources deemed reliable, the auc-tioneer and seller make no warranty or guarantee, expressed or implied, as to the accuracy of the information herein contained, or contained in our catalog. It is for this reason that buyers should avail themselves of the opportunity to make inspection prior to the auction. Although it is not likely, auction sales are subject to cancellation or postponement. Kindly contact auctioneer prior to attendance.

These terms and conditions may be modified or supplemented by language in the catalog available at the sale site or by announcement at the start of the sale. Bidders should be attentive to those announcements and to the catalog language.

PARTIAL TERMS & CONDITIONS

FINANCE YOUR AUCTION PURCHASE

Conserve Your Cash & Increase Your Bidding PowerAuctionLea$e Provides M&E Financing With Approvals from $5,000 to $999,000

(800) 438-1470Apply Online: www.AuctionLease.com

PLANT & MACHINERY INC.

APPRAISAL DIVISIONConfidential Industrial Machinery & Equipment

Appraisals Call 1-800-282-8466

UNABLE TO ATTEND?Bid on-line in real time at TO PARTICIPATE YOU MUST:

1. Go to PMI Auction Calendar for this sale and click on the bidspotter link.2. Register to bid. DO IT NOW. 3. Either wire transfer, or overnight a cashier’s check deposit in the amount of $3,000 (U.S. Bidders) or $10,000 (Foreign Bidders) to: Plant & Machinery, Inc., 2901 W. Sam Houston Pkwy. N., Suite A-130, Houston, TX 77043, (713) 691-4401. Wire Transfer instuctions are on our sale calendar at www.pmi-auction.com

You must be registered and have your deposit in the hands of Plant & Machinery, Inc. at least 24 hours prior to the start of the auction. Failure to register and/or failure to send your deposit to Plant & Machinery, Inc. may disqualify you from bidding. DON’T WAIT.

If you need assistance, don’t hesitate to call (713) 691-4401. ALL WEBCAST BIDS ARE SUBJECT TO A 18% BUYER’S PREMIUM.