AU0254E Rev. 00 - 11/2015 AVL CONCERTO 4™CONCERTO... · 2015-11-26 · A new option for label positioning is available: Labels of all curve lines in a diagram can be arranged as

AU0254E Rev. 00 - 11/2015

AVL CONCERTO 4™Experience the harmony

Release NotesCONCERTO 4.8

The contents of this document may not be communicated to any third party without the prior written consent of AVL.

Feedback: [email protected]

COPYRIGHT © AVL LIST GMBH, 2015, ALL RIGHTS RESERVED

mailto:[email protected]

3Table of Contents

AVL CONCERTO 4™ — Release Notes

Table of Contents

1 Scope.................................................................................................................................. 5

2 New Functions................................................................................................................... 7

2.1 Improved Movie Object............................................................................................................. 7

2.2 New Matlab Plug-In .................................................................................................................. 7

2.3 Secure Access to Lynx/Bobcat Data ........................................................................................ 8

2.4 Adding/Removing Attachments to/from ASAM-ODS Tests or Measurements ......................... 8

2.5 Opening Attachments at Measurement Points of ASAM-ODS Data ........................................ 8

2.6 Adding/Removing Isolines Directly in a Diagram, Edting Attributes ......................................... 8

2.7 Vertical Bands for Labels.......................................................................................................... 9

2.8 Manual Label Positioning ......................................................................................................... 9

2.9 New GIS Control Object ........................................................................................................... 9

2.10 Data Query via Local SOLR Indexing....................................................................................... 9

2.11 Template Formulas................................................................................................................. 10

3 Improved/Extended Functions....................................................................................... 11

3.1 Data Display and Display Objects .......................................................................................... 11

3.1.1 JC-4836 Legend Entries in Layout Explorer Not Automatically Refreshed afterData Addition .................................................................................................................... 11

3.1.2 JC-4874 Auto Range Function Not Working for Logarithmic Scales ................................ 11

3.1.3 JC-4936 "Raise Pen on Invalid" Function Not Working for CTF Data .............................. 11

3.1.4 JC-5091 "Add everywhere & sync." Cursor Synchronization Function Not Working ........ 11

3.1.5 JC-5101 Invalidate Records Function Not Working on Defined OnLoad Macro............... 11

3.1.6 JC-7570 Data Key Sorting in Channel Browser Not Logical............................................. 11

3.1.7 JC-7665 "Freeze Curves" Function Not Working for Cyclic MDF Data ............................ 11

3.2 Data Explorer and Data Handling........................................................................................... 12

3.2.1 JC-4900 Sorting by Attribute Not Possible in the My Computer/Network View ................ 12

3.2.2 JC-5045 Embedding of CTF Data in a Layout Not Working Properly............................... 12

3.2.3 JC-5170 Unit Conversion for IFiles Using Map File Not Working ..................................... 12

3.2.4 JC-5365 New Method of Data Key Sorting ....................................................................... 12

3.2.5 JC-5913 Channel Name Translation Using Map File Causing Changes inData Points ....................................................................................................................... 12

3.2.6 JC-6677 Repeated Opening of Compressed Data Leads to Error Messages .................. 12

3.2.7 JC-7654 Adaption of DCM File Plugin to New DCM Data Structures............................... 12

3.2.8 JC-7920 New Logic for Measurement Concatenation Function ....................................... 13

Table of Contents4


3.3 Formula/Script Editor.............................................................................................................. 13

3.3.1 JC-4972 AddDataSet Script Function Not Working with Array Datasets ..........................13

3.3.2 JC-5121 Script Function Colour of Class Object Using Wrong Color Palette ...................13

3.3.3 JC-5366 New MultiOpen Script Function ..........................................................................13

3.3.4 JC- 5500 New IsDialogActive Script Function...................................................................13

3.3.5 JC-8015 Undesired Change of Invalid Flag Due to a Calculation.....................................13

3.3.6 JC-8091 Change in Compiler Leads to Altered Behavior..................................................13

3.4 CalcGraf ................................................................................................................................. 14

3.4.1 JC-5562 CalcGraf Power Function Delivers No Base if Base Has No Base Base Line /Base Values ......................................................................................................................14

3.4.2 JC-7329 Changes in CalcGraf Models Always Saved in TempDir....................................14

3.5 Setup Settings ........................................................................................................................ 14

3.5.1 JC-4891 Failed Attempt to Load GlobalEnvironmentFile Leads to Deletion ofconcerto.ini Entry GlobalEnvironmentFile .........................................................................14

3.6 Miscellaneous......................................................................................................................... 14

4 Limitations and Known Problems.................................................................................. 17

4.1 File Plug-ins for CONCERTO 64-Bit....................................................................................... 17

4.2 ITS00369489 JPN and CHN Characters in Formula/Script Editor ......................................... 17

4.3 ITS00367718 Program Crash When Reading Long Channels............................................... 17

4.4 JC-4748 MatLab Runtime Environment in CONCERTO 64-Bit.............................................. 17

4.5 JC-4732 GlobalVar("$APPLICATION_VERSION") in CONCERTO 64-Bit ............................ 17

4.6 JC-5028 Use of User Variables Restricted in Calculator........................................................ 18

4.7 JC-5306 Changing Base Type of Data in OnLoad Macros Not Possible ............................... 18

4.8 JC-5456 Measurement Splitting Not Working for Data with Non-MonotonicallyIncreasing Base Traces.......................................................................................................... 18

4.9 JC-6296 Script Function StrTokenize Accepts Single Characters Only ................................. 18

4.10 JC-7686 New Movie Object No Longer Supports Old Video Formats.................................... 18

4.11 JC-7804 Data Search Using SOLR Indexing Uses Certain Special Charactersfor Searching .......................................................................................................................... 18

4.12 JC-7806 Drag and Drop Not Working Automatically with Channels andRich Text Objects ................................................................................................................... 18

4.13 Borrowing Licenses via Laptop............................................................................................... 19

5Scope


1 Scope

Product version

Available languages

German (GER), English (ENG)

Last released version

AVL CONCERTO 2015 SPa V4.7

Supported operating systems

Windows 7® (32-bit, 64-bit), Windows 8.1® (32-bit, 64-bit),

Additionally required software packages

– Microsoft Visual C++ 2010 Redistributable Package (x86)

– Microsoft Visual C++ 2010 Redistributable Package (x64)

Recommended PC configuration

Intel Core i5 2.5 GHz processor or equivalent AMD processor

Release date

31.10.2015

This document describes the new functionalities of version CONCERTO 4.8 and is intended for use as a reference when a system is updated to version CONCERTO 4.8. For detailed information on the relevant functions, please refer to the online Help or the relevant Product Guide.

Product version AVL CONCERTO 4™

Internal version CONCERTO 4.8

Scope6


7New Functions


2 New Functions

2.1 Improved Movie Object

The existing movie object was revised and improved with regard to usability and support of current video codecs.

In addition to offset and frame rate, the Properties dialog now allows defining a section of a video by entering start and end time. The images before and after the defined times are not shown and not used for video display. You can also use the slider to set the start and end time.

You can additionally synchronize the movie object with a cursor provided in the diagram. Moving the cursor in the diagram displays the related image in the movie object.

For details, see the CONCERTO 4.8 documentation or Online Help.

2.2 New Matlab Plug-In

The new AVL Matlab File plug-in enables MATLAB files (.mat) with a defined, specific structure to be read.Using a description file in .ini format, it is possible to define which data has to be read from a MATLAB file and how it is to be displayed:

As an alternative to the global description file (valid for all data sources) it is also possible to assign individual description files to data sources.


Example

Video length = 25000 ms

Offset 0 ms

Start 15000 ms

End 22000 ms

This setting has the following effect: The first 15 seconds (375 images at a frame rate of 25 fps) and the last 3 seconds (75 images) of the movie are removed; the starting time is shifted to 0; the movie now has a duration of 7 seconds (15 - 22 seconds) or 175 images, i.e. after 7 seconds, no images are shown any more (display is black).

New Functions8


2.3 Secure Access to Lynx/Bobcat Data

Access to secure Lynx/Bobcat data is ensured by username, password and an optional security file. The path to the security file is defined by the entry Bobcat-SecurityFile in the relevant data source.

The first time such a data source is called up, a login dialog is shown for entering the user data. The access details are saved for later data access.

If no security file is defined, no dialog is shown and data access is unrestricted.

2.4 Adding/Removing Attachments to/from ASAM-ODS Tests or Mea-

surements

CONCERTO now provides two ways of adding Attachments (external refer-ences) to a test or measurement:

By using drag & drop: You can drag entire folders or individual files from Windows Explorer onto the test or measurement. The files are analyzed to ensure that they can be read. For Windows file formats no further settings need to be made.

By using the Attach Files option from the test's or measurement's context menu (only available if the relevant ASAM-ODS data source allows the use of external references).


2.5 Opening Attachments at Measurement Points of ASAM-ODS Data

CONCERTO allows you to open linked attachments directly at the relevant measurement point.

A measurement usually includes a channel that contains the attachment file names for the respective measurement point.


2.6 Adding/Removing Isolines Directly in a Diagram, Edting Attributes

Isolines can now be added directly to the diagram object by using the context menu or the auto toolbar.

After selecting a position, a Tooltip shows the x/y-coordinates and the interpo-lated z-value at the relevant position.

One or more isolines can be deleted by selecting the relevant isolines and pressing the Delete key or choosing Delete from the context menu. To cancel the deletion of isolines, use the Undo function.

After selecting one or more isolines, attributes can be edited directly by choosing the Properties option from the context menu.


9New Functions


2.7 Vertical Bands for Labels

A new option for label positioning is available: Labels of all curve lines in a diagram can be arranged as flush vertical bands.


2.8 Manual Label Positioning

Labels on curve lines can now be positioned manually as required. Automatic label positioning is still possible.

To position a label manually, select the curve where you want to position the label and then use the context menu. You can move the created label on the curve line on which it was created or change its appearance.

Layout Explorer displays these labels as subobjects for the respective curve line.


2.9 New GIS Control Object

The new GIS (Geographic Information System) Control object enables you to integrate geo-data into your diagram, which is shown in a diagram window. You can then superimpose track data on top of the geo-data, for example in GPS Exchange Format (GPX).

The geo-data is provided by OpenStreetMap.

By saving the relevant map material locally you can apply this function either online or offline, i.e. without having an established Internet connection.

Additional display possibilities via Formula/Script Editor using a script:

Setting a marker on the track using the SetMarker in the Formula/Script Editor and controlling it using an OnMove script applied to a cursor object. This OnMove script applied to a cursor has the effect that as the cursor position changes, a marker is moved across the track in the GIS object.


2.10 Data Query via Local SOLR Indexing

Using the Enterprise search engine Solr, CONCERTO offers efficient indexing and high-performance search capabilities for large volumes of data. The function allows indexing any data (consequently also ASAM-ODS data sources) directly in Data Explorer. The feature requires an installed Java Runtime Environment (JRE), version 1.7 (b40) or higher.

Search results are displayed in a separate dialog window and can be refined using special operator syntax (e.g. "avg(Speed) <>4000 - 6000 and size >10").

It is even possible to navigate through the search results. Search results can be localized in Data Explorer (using the context menu) or removed from the index again.

New Functions10


It is also possible to access and evaluate the Solr index via Formula/Script Editor.

The Solr search function is available as a local version (5000 indexed files maximum); there is also the option of purchasing an unlimited number of indexed measurement files.


2.11 Template Formulas

Standard formulas always use fixed input quantities (i.e. references to datasets). If you need a certain syntax repeatedly, but with different input quantities, this might produce a large number of identical formulas which all would have to be adjusted if the syntax changed.For this reason, CONCERTO 4.8 features the option of defining template formulas. The advantage of using template formulas is that they are created "dynamically", i.e. they are not filled with input quantities until they are accessed (calculated).


11Improved/Extended Functions


3 Improved/Extended Functions

3.1 Data Display and Display Objects

3.1.1 JC-4836 Legend Entries in Layout Explorer Not Automatically Refreshed after

Data Addition

Up until now, when adding a dataset to an existing diagram with a legend, the entries relating to the legend in Layout Explorer were not automatically refreshed. Furthermore, any new legend entries were not transferred to the legend Properties dialog either.

3.1.2 JC-4874 Auto Range Function Not Working for Logarithmic Scales

The Auto Range function did not work for logarithmic scales. Whenever this function was evoked, no changes were made to the scales. It has to be noted that the moving of curves in diagrams with logarithmic scales does not work.

3.1.3 JC-4936 "Raise Pen on Invalid" Function Not Working for CTF Data

The function Raise Pen on Invalid did not work for data sources of type Trans-port File. The set invalid flags were ignored and any lines in the channel preview or in display objects remained continuous as in line diagrams.

3.1.4 JC-5091 "Add everywhere & sync." Cursor Synchronization Function Not

Working

The function Add everywhere & sync. for cursor synchronization did not work if no unit was defined on the x-axis.Now the function can be used if the names as well as the units for the x-axis of all diagrams to be synchronized match. In case no unit is defined for the x-axis of all diagrams to be synchronized, this function will now work too.

3.1.5 JC-5101 Invalidate Records Function Not Working on Defined OnLoad Macro

The Invalidate Records function did not work for data loaded from data sources if an OnLoad macro was defined for such data. Up until now, the invalid flags for the data were not changed.

3.1.6 JC-7570 Data Key Sorting in Channel Browser Not Logical

The data key sorting function in the Channel Browser did not work logically if data keys had the same name followed by an index. The following order of sequence could occur: TM1 - TM10 - TM11 - TM2 - TM3 - TM4 - TM5 - TM6 - TM7 - TM8 - TM9.The sort sequence has now been adjusted according to the following logic: TM1 - TM2 - TM3 - TM4 - TM5 - TM6 - TM7 - TM8 - TM9 - TM10 - TM11

3.1.7 JC-7665 "Freeze Curves" Function Not Working for Cyclic MDF Data

The function Freeze curves did not work for cyclic MDF data. Although the func-tion could be selected, it only worked for IFiles. Now the function can also be applied to cyclical MDF data.

Improved/Extended Functions12


3.2 Data Explorer and Data Handling

3.2.1 JC-4900 Sorting by Attribute Not Possible in the My Computer/Network View

Sorting the list view by attribute (e.g. by name or modification date) was not possible in the My Computer/Network view in Data Explorer.It is now possible to use these attributes for data sorting.

3.2.2 JC-5045 Embedding of CTF Data in a Layout Not Working Properly

Loading CTF data embedded in a layout only worked if the layout was loaded with the same CONCERTO installation or with an CONCERTO installation with the same structure. Conflicts occurred with paths that prevented the data from loading.Now CTF data can be embedded in a layout and reloaded regardless of the installation structure.

3.2.3 JC-5170 Unit Conversion for IFiles Using Map File Not Working

The unit conversion function for IFiles using the map file did not work.This is a known bug, which we have not been able to eliminate to this day.However, it was never explicitly pointed out to the user. For this reason an error message is now shown in the message list whenever an attempt is made to perform a unit conversion for IFiles using a map file.

3.2.4 JC-5365 New Method of Data Key Sorting

The new method of data key sorting introduced with CONCERTO 2.7 was canceled for the user interface.Now, any existing formulas, macros or scripts using datasets that contain no data key definition and additionally occur in different data keys can be used in the usual way. Performance was able to be enhanced by an internal data sorting system.

3.2.5 JC-5913 Channel Name Translation Using Map File Causing Changes in Data

Points

The map file based channel name translation for data sources of type AVL InMo-tion File caused changes in the data points. All y-trace data of all translated channels were set to 0.Map file based channel name translation for data sources of type AVL InMotion File is now possible again.

3.2.6 JC-6677 Repeated Opening of Compressed Data Leads to Error Messages

If a compressed file (e.g. compressed data of type .zip) was opened repeatedly multiple times, this led to error messages in the message list. Up until now, after being opened repeatedly, it was not possible to reload the same file without having to restart CONCERTO.

3.2.7 JC-7654 Adaption of DCM File Plugin to New DCM Data Structures

Due to new file structures in DCM data, the DCM File Plugin in CONCERTO had to be adjusted. Up until now, it was not possible, for example, to read channel names containing dots, or data key names containing an index in square brackets (e.g. DatakeyName[1], DatakeyName[2]) in the DCM File Plugin correctly.



3.2.8 JC-7920 New Logic for Measurement Concatenation Function

The logic for the concatenating measurements function (DXV entry Concate-nateMeas=) was adjusted for time-based data.

For details, see the CONCERTO 4.8 Online Help.

3.3 Formula/Script Editor

3.3.1 JC-4972 AddDataSet Script Function Not Working with Array Datasets

The AddDataSet script function did not work if you wanted to add array datasets (containing a # in the channel name) to a file.CONCERTO was unable to execute this command.

3.3.2 JC-5121 Script Function Colour of Class Object Using Wrong Color Palette

The script function Colour of the class Object used the wrong color palette. Up until now, instead of the color palette seen under Format | Colours/Styles/Marker, this script function used a fixed color palette of the script function Colour of the class DisplayItem (see CONCERTO Online Help for the color palette of the script function Colour in the class DisplayItem).

3.3.3 JC-5366 New MultiOpen Script Function

CONCERTO 4.8 provides the new script function MultiOpen for the File class.This function opens a test already open by using a new alias.

3.3.4 JC- 5500 New IsDialogActive Script Function

CONCERTO 4.8 provides the new script function IsDialogActive for the Applica-tion class.This function checks whether a certain dialog (defined by the dialog name) is active and returns 1 if a dialog with the mentioned name is already active, other-wise it returns 0.

3.3.5 JC-8015 Undesired Change of Invalid Flag Due to a Calculation

Under certain circumstances it could happen that CONCERTO unintentionally changed the invalid flag during calculation. So it could occur that values were set to valid due to a calculation in the Formula/Script Editor.

3.3.6 JC-8091 Change in Compiler Leads to Altered Behavior

If changes were made to the Formula Compiler, formulas/macros/scripts in CONCERTO 4.7 were canceled whenever a non-existent dataset was assigned to a variable.Earlier versions of CONCERTO exhibited a different behavior in this respect. In earlier versions, formulas/macros/scripts were not canceled when a non-existent dataset was assigned to a variable, but later on when such variables were to be used.



3.4 CalcGraf

3.4.1 JC-5562 CalcGraf Power Function Delivers No Base if Base Has No Base Base

Line / Base Values

The Power function delivers no base trace for the result if the base of the expo-nential function had no base trace.Instead, a log point-based base trace was assumed.Now, if the base itself has no base trace, the function returns the same base trace for the result as that of the exponent.

3.4.2 JC-7329 Changes in CalcGraf Models Always Saved in TempDir

Whenever changes were made to a CalcGraf model after it was opened from a defined source, this model was always saved to the TempDir folder in CONCERTO instead of to the model’s defined source.When using this approach now, CONCERTO overwrites the original model instead.

3.5 Setup Settings

3.5.1 JC-4891 Failed Attempt to Load GlobalEnvironmentFile Leads to Deletion of

concerto.ini Entry GlobalEnvironmentFile

The concerto.ini entry GlobalEnvironmentFile was automatically deleted from the concerto.ini file if the GlobalEnvironmentFile was unable to be loaded. This mechanism was implemented to prevent reloading at every restart.But there are situations in which the deletion of the concerto.ini entry GlobalEnvi-ronmentFile is not desired (e.g. if a user temporarily has no access to the GlobalEnvironmentFile).The entry is now no longer deleted if the GlobalEnvironmentFile cannot be loaded.

3.6 Miscellaneous

JC-4794 Input Assistance for Script Function AddObj Not Offering All Selec-tion Options

JC-4802 AutoRange Function Malfunctioning After Deletion of Datasets

JC-4829 CONCERTO Crash Caused by Corrupt Channels

JC-4898 Measurement Split Removal Not Working with Defined OnLoad Macro

JC-4924 Data of Type Multi ASCII File Containing Empty Columns Not Being Properly Read

JC-4934 Script Function Meas No Longer Working Properly

JC-4986 Script Function StrTokenize Unintentionally Deleting Last Token

JC-5085 CONCERTO Crash in Formula/Script Editor Debug Mode

JC-5091 Cursor Synchronization Not Working for Log Point-Based Data

JC-5148 Script Function RecompileCalcGraf Not Working

JC-5220 Documentation for Script Function SetCursor Requiring Update

JC-5248 Predefined Data Source Templates Getting Corrupted



JC-5253 BLF Data Not Being Properly Read

JC-5270 Time-Based Multi ASCII File Type Data Not Being Properly Read

JC-5283 Script Function GetDimension Ignoring unitalias.txt

JC-5387 Tooltips in CalcGraf Containing Wrong Information

JC-5953 Memory Leak When Using Virtual Channels

JC-6645 Copy/Paste Not Possible for Text Box Object with Locked Window

JC-7211 Problems Opening ATF Data Zipped Twice

JC-7404 AST File Plugins Adapted to New AST Data Structures

JC-7424 Wrong Link to DBC File When Reading BLF Data

JC-7427 User Levels Not Working with MultiUser Installation

JC-7516 CONCERTO Freezes when Navigating Layout

JC-7694 Data from Zipped ATFx Files No Longer Visible After Layout Save

JC-7709 Passwords from Hexadecimal System Not Usable for Server Login

JC-7796 Change in Compiler Leads to Unexpected Behavior

JC-7805 Data Explorer Crash with DatasetArrays in Container File

JC-7834 Reimport of Exported Data of Type ATFx Multi ASCII File Types Not Possible

JC-7908 User Variables Not Supported in AST File Plugin



17Limitations and Known Problems


4 Limitations and Known Problems

4.1 File Plug-ins for CONCERTO 64-Bit

The following data file plug-ins are currently available for the CONCERTO 32-bit version only:

Bus-Logging File

DIGALOG Data File

GTPower

Magic Analysis Result File

PC-based PUMA TRR File

PUMA Recorder (MCF)

Yokogawa DL(M)xxxx Series

Yokogawa WT1600/WT3000

Yokogawa WT3000 ASCII

Yokogawa WT3000 ASCII Numeric3

Yokogawa WT3000 ASCII Numeric4

4.2 ITS00369489 JPN and CHN Characters in Formula/Script Editor

No comments in Japanese or Chinese language can be entered and displayed in the Formula/Script Editor.

4.3 ITS00367718 Program Crash When Reading Long Channels

Due to a limitation in the Matlab Library used in CONCERTO, files of type MATLAB MAT File could not be read, which could then cause the program to crash.Such files cannot be read in Matlab either. In Matlab this circumstance is indi-cated by the message "too many elements".

4.4 JC-4748 MatLab Runtime Environment in CONCERTO 64-Bit

It is not possible to use MatLab's runtime environment with CONCERTO 64-bit.

4.5 JC-4732 GlobalVar("$APPLICATION_VERSION") in CONCERTO 64-Bit

If using the Formula/Script Editor function GlobalVar("$APPLICATION_VERSION"), the last character of the returned value is not shown (e.g. 460.0.96.31 instead of 460.0.96.319).

Limitations and Known Problems18


4.6 JC-5028 Use of User Variables Restricted in Calculator

It is not possible to exclusively use user variables for a calculation in Calculator.It is, however, possible to draw on user variables in combination with channels for calculations in the Calculator.

4.7 JC-5306 Changing Base Type of Data in OnLoad Macros Not Pos-

sible

It is not possible to change the base type of data by using an OnLoad macro. This means that numerical data cannot be converted into text data.

4.8 JC-5456 Measurement Splitting Not Working for Data with

Non-Monotonically Increasing Base Traces

The measurement splitting functionalities do not work for data with non-mono-tonically increasing base traces.

4.9 JC-6296 Script Function StrTokenize Accepts Single Characters

Only

The script function StrTokenize accepts only single characters.This means that no strings such as ".." can be used as separators.

4.10 JC-7686 New Movie Object No Longer Supports Old Video Formats

The movie object introduced in Chapter New Functions on page 7 is unable to play certain old video formats (e.g. formats based on 256 colors).

4.11 JC-7804 Data Search Using SOLR Indexing Uses Certain Special

Characters for Searching

The data search using SOLR indexing uses some special characters such as "!" for searching. Accordingly, "!" is interpreted as NOT. Consequently, a search for "!N", for example, will deliver no data key called "N" or "!N". To find a data key called "!N", the search bar would have to contain "name=!N".

4.12 JC-7806 Drag and Drop Not Working Automatically with Channels

and Rich Text Objects

A rich text object is a form object, so channels on which drag and drop is applied are inserted as an item along the same lines as in the form table, e.g. #A.To be able to display data of the used channel in a Rich Text object, e.g. #An has to be used (for the channel name).

19Limitations and Known Problems


4.13 Borrowing Licenses via Laptop

If using a laptop, it might not be possible to borrow CONCERTO licenses (partic-ularly if using a docking station). CONCERTO borrows the license from the server and assigns it to the active network card. Please note that this is the same network card as the one used when working with CONCERTO later on (docking station vs. LAN or W-LAN).

Limitations and Known Problems20


FOR FURTHER INFORMATION PLEASE CONTACT:

AVL List GmbH, Hans List Platz 1, 8020 Graz, Austria

Phone: +43 316 787-0, Fax: +43 316 787-400, eMail: [email protected], www.avl.com

http://www.avl.com

http://www.avl.com

Documents

AU0254E Rev. 00 - 11/2015 AVL CONCERTO 4™CONCERTO... · 2015-11-26 · A new option for label positioning is available: Labels of all curve lines in a diagram can be arranged as