BUYER’S GUIDEl Features l Specifications l Attachments

RS1000

As Shipped

Engine

Starting

Final Drive

Track Clutches

Brakes

Rated Pull

Size

Weight

Speed

Attachments

ASSEMBLED, painted

Honda, 18.5 ft/lbs Tq. [390cc]

Electric Start, at seat

Triple Ball Bearing [sealed]

Dual each Track [forward]

Double, 8” Caliper

1,500 lbs. at Track

51” long, 41” wide, 38” high

700 lbs.

3.15 MPH

Manual or Hydraulic Attachments

D-I-Y KIT, unpainted

Briggs & Stratton, 11.5 ft/lbs Tq. [250cc]

Recoil, at seat

Double Ball Bearing [sealed]

Single each Track [forward]

Single, 8” Caliper

1,000 lbs. at Track

51” long, 41” wide, 38” high

575 lbs.

3.15 MPH

Manual Attachments only

What’s the DIFFERENCEbetween the

RS1000 & MD196K?

RS1000

MAGNATRAC® RS1000

Factory Assembled... Build it Yourself... D-I-Y Kit

BACKHOE BUCKETS - 12” or

16” wide Backhoe Bucket

mounts directly to Backhoe dip-

per arm. (See below on back-

hoe).

Heavy-Duty single

tooth ripper mounts

in place of Bucket...

equipped with two

(2) replaceable

teeth:

(1) 16” x 2” x 1/2”

thick “plow steel”

tooth for stone &

frost picking &

hardpan penetra-

tion to 18” [shown

below right].

(2) 15” x 2” x 1/2”

thick “serrated”

edge tooth... allows

root cutting to

depths of 18”

[not shown].

POWER PACK KIT -

Hydraulic power system

for raising and lowering

select front and rear at-

tachments. Does not in-

clude cylinders, hoses

or fittings. (See HFH15

Hydro Front Hitch &

HRH35 Hydro Rear

Hitch.)

ROLL-OvER PROTECTIvE STRUCTURE - A Magnatrac’s

low center of gravity and ground gripping traction are no

substitute for ROPS protection on uneven ground. Includes

seat belt and mounting hardware. (Requires AM39 Angle

Mounts).

Roll-overProtectiveStructure

MD196K

MINI-DOZER® MD196K

The RS1000 & MD196K are identical in

physical size and share a majority of com-

ponents... The difference is a more power-

ful engine in the RS1000 plus additional

Heavy-Duty drive train components.

MANUAL FRONT HITCH KIT - Standard-

duty front mounted hitch for manual “lift”.

Complete with dual sets of “lift assist”

springs, lift handle and all hardware.

How easy can I lift the MFH15 Manual Front Hitch with “lift assist” springs?

(1) 3 lbs. of force on lift handle will raise the 95 lb. DB44 Dozer Blade.

(2) 29 lbs of force on handle will raise 95 lb. DB44 Blade, 50 lb. BM13 Bucket

Mouth and a 186 lb. “load”... that’s a combined “lift” of over 330 lbs!

BUCKET MOUTH KIT

DOZER BLADE KIT - 42” wide

x 15” high x 3/16” thick solid

steel blade with replaceable

cutting edge. Manually angles

left and right. [Requires MFH15

or HFH15 Front Hitch]

Manual Front Hitch

Bucket Mouth[shown mounted to Dozer Blade]

Dozer Blade

FRONT WEIGHT KIT - Front

mounted weight kit for use as

a counter balance when a

Backhoe is mounted. Heavy-

duty steel bar welded to

plates and mounted to the

front of RS1000. (Additional

slip on weights available for

even more weight).

PP35

FW15

MD196K-MFH15MFH15

MD196K-DB44DB44

MD196K-BM13BM13

HRH35

ROPS20

Hydro RearHitch

BACKHOE KITS - Backhoe mounts directly to a set of AM39 Angle

Mounts Brackets. D1060 utilizes (2) crank down stabilizers and (4) single

stick backhoe controls for each motion. D1060UG utilizes (2) hydraulic

stabilizers and only (2) joystick backhoe controls for all digging opera-

tions. Comes with fully rotatable and adjustable seat. (Fully assembled

on a secondary pallet)

FW15, HFH15,

HE47 and DB44.

SAFETY NOTE: To “safely” counter-balance the Backhoe’s weight,

at a minimum, the following front attachments should be installed:

BACKHOE FROST / CHISEL RIPPER

Power Pack

Front Weight

*

*

*

Attachments... for MD196K & RS1000*

Attaches in minutes to DB44 Dozer Blade with only

two pins... requires no tools! When installed, it forms

a “mouth” that when used with the Blade becomes a

hard-working Bucket. Easily handles a couple of

100 pounds of rocks, concrete, mud,

driveway gravel, etc. Dumps with

simple hand lever. [Not designed

for use with HFH15 Hydro Front Hitch]

Unassembled,Unassembled,Unpainted KIT Unpainted KIT

BACKHOE

BackhoeBucket(B612)

JoystickWobble Controls

BackhoeFrost /ChiselRipper

14

HYDRO REAR HITCH

KIT - All-hydraulic Rear

Hitch allows operator to ef-

fortlessly hook-up and

move logs, rear-mounted

carriers, log splitters, com-

pact trailers, etc. Includes:

cylinder, hoses, fittings &

mounting hardware. Re-

quires PP35 Power Pack.

[below]

BUCKET FORCE...

DIPPER FORCE...

LIFT (@ bucket pivot)...

LIFT (@ dipper pivot)...

SWING ARC...

STABILIZER SPREAD...

TRANSPORT WIDTH...

BUCKET CAPACITIES...

B612...

B816...

2500 lbs1250 lbs135 lbs210 lbs120 deg41.5”41.5”

1.16 cu. ft.1.54 cu. ft.

A - 80”

B - 114”

C - 103”

D - 75”

E - 162”

RATINGS DIMENSIONS

ROCK/DEBRISTHUMB KIT

Rock “thumb” mounts

to D1060/UG Backhoe

“dipper arm” of Backhoe

with two bolts. Distance

of Bucket “teeth” to

Thumb is adjustable.

RockThumb

C

A

B

D

E

2 Feet

2 Ground Level

D1060/UGBACKHOERatings &

Dimensions

MD196K

MINI-D

OZER®

MINI-DOZER®

BR50

RT24

B612 - 12” BucketB616 - 16” Bucket

D1060(Shown)

D1060 - Crank Down Stabilzers with 4 Stick Controls (Pictured)D1060UG - Hydro Stabilzers with Joystick Wobble Controls

ANGLE MOUNTS

- (2) heavy-duty

mounting brackets

are the connection

point for a ROPS,

Backhoe or Ballast

Box.

AngleMounts

AM39

Attachments... ONLY for RS1000 with PP35. [Continued]

MD196K

Buy-Guide 1.01.19

Buy-Guide MD196K & RS1000 1.01.19.qxp_Layout 1 6/19/19 9:42 AM Page 1

LOG CRANE ADAPTER /

DRAWBAR KIT - Required for

use of LW228 Log

Crane when a

MRH35 or HRH35

Rear Hitch is

mounted. [Can also

be used alone

when you need a drawbar and

have a Rear Hitch mounted].

RUBBER TRACK SHOE KIT -

Medium-duty rubber pavement shoes

allow “scratch free” travel on any sur-

face. Gives added penetration and trac-

tion. Ideal for snow use on blacktop or

concrete. Not for heavy, rocky condi-

tions. [Complete with all fasteners.]

Bolts to steel tracks.

MUD / ICE SCRAPER KIT - Pair of

“scraper arms” continually remove

rock chips, mud and snow build-up

from between track sprockets. (For

Steel Tracks only).

GROUSER TRACK SHOE KIT -

Heavy-duty “U” shaped all-steel shoes

give added penetration and traction to

track. Provides ultimate stiffness and

strength to track allowing use in rocky

conditions with the best possible trac-

tion. [Complete with all fasteners.]

Bolts to steel tracks.

HITCH EXTENDER KIT - Moves attach-

ment “mounting holes” of Front Hitch 6” for-

ward. Required for use with D1060

Backhoe and BK45 Material Bucket Kit.

MATERIAL BUCKET KIT (Hydro Dump) -

Front mounted, heavy-duty, 42-1/2” wide x

12-3/4” high x 13-1/2” deep, “hydro-dump-

ing”, hardened cutting edge, 350 lbs. rated

load... Rear “counterweight” required for

maximum loads. [Requires HFH15 Front

Hitch, PP35 Power Pack and HE47 Hitch

Extender]

MATERIAL BUCKET KIT (Manual Dump)

- Front mounted, heavy-duty, 42-1/2” wide x

12-3/4” high x 13-1/2” deep, manual dump-

ing, hardened cutting edge, 350 lbs. rated

load... Rear “counterweight” required for

maximum loads. [Similar to BK45 Material

Bucket above, but without the “hydro-dump-

ing” features].

BUCKET FORKS KIT -

Four, 25” long, 19” high, 2-

1/2” wide x 1/2” thick solid

steel forks quickly mount to

BK44 or BK45 Material

Buckets with eight locking

bolts. [Requires BK44 or

BK45 Material Bucket].BLADE DRAWBAR KIT - Mounts to “top

lip” of DB44 Dozer Blade... see “inset”

Photo above. Use for medium-duty pulling,

has 3/4” hole for tow hook or chain clevis.

[Requires drilling four 5/16” holes in Blade].

BladeDrawbar

REAR DRAWBAR KIT - Mounts to rear of

tractor at two levels: Drawbar

can be 5-1/2” or 10-1/2”

above ground. [Can not be

used while any rear attach-

ment is mounted].

TRACK MAT KIT - Two

(2) 18” wide x 1/2” thick x

96” long rubber mats.

Use as protective

padding when driving

steel tracks over concrete

walks and drives or to

protect parking spot in

garage.

MANUAL REAR HITCH KIT -

Available with standard “sleeve

hitch” and two “lift-assist”

springs. Comparison for judging

ability of “lift assist” springs: 2

lbs. of lift handle force will raise

24 lb. DR30 Ripper. [includes

basic Drawbar shown]

HITCH ADAPTER KIT -

Mounts to Rear Hitch with two

bolts. Allows use of dozens of

2” Receiver Tube Attachments.

THREE SHANK RIPPER KIT -

Three 17” long x 2” wide x 5/8” thick

“hardened steel” ripping teeth. May

be used singlely or all three together.

Design allows to flip tooth for greater

wear. [Recommended for RS1000]

DOUBLE SHANK RIPPER KIT -

Two 17” long x 2” wide x 5/8” thick

“hardened steel” ripping teeth. May

be used singlely or both together.

Design allows to flip tooth for greater

wear. [Recommended for MD196K]

STEEL RAKE KIT - Unique “finishing rake”

using thirty-seven “log nail” teeth mounted in

42” wide frame. Takes place of hand raking

operations. NOT for ripping. NOT for use with

PP35 Power-Pack! [Requires MRH35 or

HRH35 Rear Hitch].

LOG CRANE KIT - Heavy-duty

rear mounted crane with 800

lbs. winch pulling capacity.Does

not include

winch. Use LW16

Manual Winch

at right...

Has self-

contained

drawbar.

The MAGNATRAC® RS1000 is offered completely assembled and painted. The MINI-DOZER® MD196K is completely manufactured but sold in an

unassembled, unpainted KIT form. It’s the customer’s responsibility to provide competent service ability! The servicing can be provided either by

the mechanically inclined customer, or by a local mechanic. All Attachments and Accessories [unless noted otherwise] are shipped in an easy-

to-assemble KIT form. We provide Manuals & collateral material for complete service and repair so that anyone with reasonable mechanical skill

can perform all required service work. Contact the factory for more information.

The STRUCK CORP. has a policy of continuous product improvement and reserves the right to change its products, specifications and dimensions

at any time without notice or obligation. All dimensions and specifications are based upon best possible performance of components, running at

100% efficiency. Results will vary due to changes due to component wear, oil temperature, etc. If a particular specification or dimension is critical to

your application, contact the factory for more detailed information.

Struck Corp. W51N545 Struck Lane P.O. Box 307 Cedarburg, WI 53012

E-Mail: sales@StruckCorp.com Phone: 262-377-3300 Web: www.StruckCorp.com Fax:262-377-9247ll l

l l l

HYDRO FRONT HITCH KIT - All hy-

draulic Front Hitch provides operator

with full power to drive a mounted

Dozer Blade or Bucket into tough soil,

gravel, manure, sand etc. with total

control. Includes: cylinder, hoses, fit-

tings & mounting hardware. [Requires

PP35 Power Pack].

Attachments... for MD196K & RS1000 [Continued] Attachments... for MD196K & RS1000 [Continued]

Manual Rear Hitch

Log Crane Adapter

Drawbar

Three Shank Ripper

Steel Rake

Double ShankRipper

Grouser Shoes

Hitch Adapter

Rear Drawbar

Track Mat

Log Crane

Bucket Forks

Rubber Shoes

Hydro Front Hitch

Box Scraper[shown mounted toDozer Blade]

MD196K-MRH35MRH35

MD196K-LCA9LCA9

TR23

MD196K-RK26RK26

HFH15

BK44

BK45

BF22

HE47

BS40

TSO58

MD196K-HA14HA14

MD196K-BD23BD23

MD196K-BD7BD7

TM96LW16

MD196K-LW228LW228

MD196K - MS90MS90

RS58

MD196K-DR30DR30

*

*

*

**

*

*

*

*

*

*

BOX SCRAPER KIT - Attaches to DB44 Dozer Blade to

trap and move loose material. 42” wide x 12+” deep x 18+”

high. Hardened and beveled “plow steel” cutting edge.

[Requires DB44 Dozer Blade; shown above mounted to

DB44 Dozer Blade]

DB44 DOZER BLADE

DB44 DOZER BLADE

MaterialBucket Kit(Hydro Dump)

Attachments... for RS1000 with Hydro Power Pack!

*Unassembled,Unassembled,Unpainted KIT Unpainted KIT

23

MANUAL WINCH KIT -

Utility winch,

800 lbs. pull capacity,

5/32” dia. x 25 ft.

long cable with

hook. [Requires

LW228 Log Crane

or mounting location

provided by customer].

Contact factory for

Electric Winches. Manual Winch

Mud/Ice Scraper

MaterialBucket Kit(Manual Dump)

Hitch Extender

Buy-Guide MD196K & RS1000 1.01.19.qxp_Layout 1 6/19/19 9:43 AM Page 2