Attachment 4 - Approved Manufacturers List

7/29/2019 Attachment 4 - Approved Manufacturers List

1/101

21 /02/2012

SERMETERIAL / EQUIPMENT

DESCRIPTION MANUFACTURER FACTORY LOCATIONPre-Qualified

ManufacturersBy SEC

REMARKS

1 POWER TRANSFORMERS

33KV & 34.5 KV PRIMARY11 .

POWER TRANSFORMERS UP TO 30 MVA1. 1. 1 53-TMSS-01Applicable Standards:

SWEDEN YesABB

United States-N/A YesABB ( T& D)

SPAIN-Bilbao Yes Based on TS&SD letter# 09-F01546/03-03032301 dated 19th.

Aug 2009, it is pre-qualified for Power Transformer up to 132kV,100MVA as confirming to SEC specification # 53-TMSS-01, rev.0with the following conditions:

All type, design, special & routine tests (including short

circuit test) as per SEC specifications/standards shall be carriedout on the first unit to be supplied to SEC in securing an order in

the presence of three (3) SEC engineers & one (1) approvedindependent inspection agency Inspector.

Seven (7) years warranty from the date of PAC of theturnkey project in case of contract award or date of delivery incase of direct material supply order.

ABB Bilbao

TURKEY-Istanbul Yes Pre-Qualification & Participation for current & future SEC'sProjects subjected to the mutual agreement between SEC & ABB

dated 09 March 2009

ABB Elektrik Sanayi A.S. [previously ABB ESAS]

FINLAND YesABB TRANSIT OY

GERMANY YesAREVA

TURKEY Yes Complete Type, Routine / Sample tests for first order & 10 YearsWarranty from the date of PAC is required.BEST

BELGIUM YesCG POWER SYSTEMS

INDIA Yes SUSPENDED FOR SEC 2005 PROJECTS AND ONWARDCROMPTON GREAVES

JAPAN-OSAKA YesDAIHEN CORPORATION

United Kingdom YesHAWKER SIDDELEY

KOREA, Republic of-Changwon YesHYOSUNG (HICO)

Page 1 of 101


2/101



ManufacturersBy SEC

REMARKS

KOREA, Republic of-Ulsan YesHYUNDAI

JAPAN YesJAPAN AE POWER SYSTEMS CORP.

FRANCE YesJEUMONT SCHNEIDER

JAPAN-- Yes ORIGINALLY TMT&D CORP. & DISSOLVED DURING APRIL 2005.MITSUBISHI

Romania-Craiova Yes Based on TS&SD letter # 11-002054-1-03032300 dated10/7/2011, it is prequalified for Power Transformer up to 132kV,

100MVA, as confirming to SEC specification # 53-TMSS-01,

Rev.0 with the following conditions:

All Type, Special, Routine and Sample tests (including shortcircuit withstand test) as per SEC specifications/standards shallbe carried out on the first batch of power transformer to besupplied to SEC in presence of three SEC Engineers and one (1)

SEC approved independent inspection agency inspector at SECapproved Independent laboratory, all the related costs forwitnessing the tests will be borne by the manufacturer. This was

confirmed by SC Electroputere SA through letter # 27499 dated14/06/2010.

Ten (10) years extended warranty from the date of PAC of the

turnkey project in case of contract award or date of delivery incase of direct material supply order. This was confirmed by SC

Electroputere SA through letter 27500 dated 14/06/2010.

SC ELECTROPUTERE SA

TURKEY-Kocaeli Yes Previously "AREVA-Turkey", the name has been changed to

Schneider Electric-Turkey based on Schneider Electric letter #MKT-18.01.11 dated 18/01/2010 and AREVA T&D letter # BF/BL25.11.2010.

SCHNEIDER ELECTRIC

GERMANY YesSCHORCH

GERMANY-NURNBERG YesSIEMENS AG (NURNBERG)

AUSTRIA- WEIZ YesSIEMENS TRANSFORMERS AUSTRIA GMBH &CO KG

JAPAN-- Yes ORIGINALLY TMT&D CORP. & DISSOLVED DURING APRIL 2005.TOSHIBA CORPORATION, T&D

AUSTRALIA-MELBOURNE YesWILSON TRANSF

23Total =

69 KV PRIMARY21 .


SWITZERLAND YesABB

SWEDEN YesABB

Page 2 of 101


3/101



ManufacturersBy SEC

REMARKS


SPAIN-Bilbao Yes Based on TS&SD letter# 09-F01546/03-03032301 dated 19th.Aug 2009, it is pre-qualified for Power Transformer up to 132kV,100MVA as confirming to SEC specification # 53-TMSS-01, rev.0with the following conditions:

All type, design, special & routine tests (including shortcircuit test) as per SEC specifications/standards shall be carried

out on the first unit to be supplied to SEC in securing an order inthe presence of three (3) SEC engineers & one (1) approvedindependent inspection agency Inspector.


ABB Bilbao

TURKEY-Istanbul Yes Pre-Qualification & Participation for current & future SEC's

Projects subjected to the mutual agreement between SEC & ABBdated 09 March 2009



GERMANY YesAREVA

TURKEY Yes Complete Type, Routine / Sample tests for first order & 10 YearsWarranty from the date of PAC is required.

BEST



PORTUGAL YesEFACEC





Croatia/Hrvatska Yes Limited to 40 MVA Only. Complete Type, Routine / Sample testsfor first order & 10 Years Warranty from the date of PAC isrequired.

KONCAR D&ST


Page 3 of 101


4/101



ManufacturersBy SEC

REMARKS

Romania-Craiova Yes Based on TS&SD letter # 11-002054-1-03032300 dated10/7/2011, it is prequalified for Power Transformer up to 132kV,100MVA, as confirming to SEC specification # 53-TMSS-01,

Rev.0 with the following conditions:

All Type, Special, Routine and Sample tests (including shortcircuit withstand test) as per SEC specifications/standards shall

be carried out on the first batch of power transformer to besupplied to SEC in presence of three SEC Engineers and one (1)

SEC approved independent inspection agency inspector at SECapproved Independent laboratory, all the related costs forwitnessing the tests will be borne by the manufacturer. This wasconfirmed by SC Electroputere SA through letter # 27499 dated14/06/2010.

Ten (10) years extended warranty from the date of PAC of theturnkey project in case of contract award or date of delivery in

case of direct material supply order. This was confirmed by SCElectroputere SA through letter 27500 dated 14/06/2010.

SC ELECTROPUTERE SA

TURKEY-Kocaeli Yes Previously "AREVA-Turkey", the name has been changed toSchneider Electric-Turkey based on Schneider Electric letter #MKT-18.01.11 dated 18/01/2010 and AREVA T&D letter # BF/BL

25.11.2010.

SCHNEIDER ELECTRIC

GERMANY-Dresden Yes based on TS&SD letter# 09-01501-03032301 dated 25th May

2009 , Siemens AG from Germany-Dresden for PowerTransformer up to 230kV, 200MVA as confirming to SEC

specification # 53-TMSS-01, rev.0 & 53-TMSS-02, rev.0 with thefollowing conditions: All type, special & routine tests for each voltage class asper SEC specifications/standards shall be carried out on the first

batch to be supplied to SEC in securing an order in the presenceof three (3) SEC engineers & one (1) approved independentinspection agency Inspector.

Ten (10) years warranty from the date of PAC of theturnkey project in case of contract award or date of delivery incase of direct material supply order.

Siemens AG (Dresden)


AUSTRIA- WEIZ YesSIEMENS TRANSFORMERS AUSTRIA GMBH &

CO KGITALY YesTAMINI



25Total =

110 KV TO 132 KV PRIMARY31 .

Page 4 of 101


5/101



ManufacturersBy SEC

REMARKS


SWITZERLAND YesABB

SWEDEN YesABB


SPAIN-Bilbao Yes Based on TS&SD letter# 09-F01546/03-03032301 dated 19th.

Aug 2009, it is pre-qualified for Power Transformer up to 132kV,100MVA as confirming to SEC specification # 53-TMSS-01, rev.0with the following conditions:

All type, design, special & routine tests (including shortcircuit test) as per SEC specifications/standards shall be carriedout on the first unit to be supplied to SEC in securing an order in



ABB Bilbao

TURKEY-Istanbul Yes Pre-Qualification & Participation for current & future SEC'sProjects subjected to the mutual agreement between SEC & ABB

dated 09 March 2009



GERMANY YesAREVA

TURKEY YesAREVA

TURKEY Yes Complete Type, Routine / Sample tests for first order & 10 Years

Warranty from the date of PAC is required.

BEST


INDIA Yes SUSPENDED FOR SEC 2005 PROJECTS AND ONWARD.CROMPTON GREAVES


PORTUGAL YesEFACEC




Page 5 of 101


6/101



ManufacturersBy SEC

REMARKS

Bulgaria-Sofia Yes Based on TS&SD letter # 11-00438-03-03032301 dated15/05/2011, it is prequalified for Power Transformers up to132kV, 100MVA as confirming to SEC specification #

53-TMSS-01, Rev.0 with the following conditions:

All type, special, routine and sample tests as per SECspecifications/standards

for Power Transformers up to 132kV, 100MVA shall be carriedout in case of contract award or SEC direct purchase order at

SEC approved independent laboratory or at manufacturerstesting laboratory in presence of three (3) SEC Engineers andone (1) SEC approved independent inspection agency. All therelated costs for witnessing of the tests will be borne by themanufacturer. This was confirmed by HHIBulgaria through

letter # D-0353 dated 20/08/2010.


turnkey project in case of contract award or date of delivery incase of direct material supply order. This was confirmed byHHIBulgaria through letter # D-0355 dated 20/08/2010.

Hyundai Heavy Industries Co. Bulgaria



Croatia/Hrvatska Yes Limited to 40 MVA Only. Complete Type, Routine / Sample tests

for first order & 10 Years Warranty from the date of PAC isrequired.

KONCAR D&ST


JAPAN YesNISSIN ELECTRIC

Romania-Craiova Yes Based on TS&SD letter # 11-002054-1-03032300 dated10/7/2011, it is prequalified for Power Transformer up to 132kV,

100MVA, as confirming to SEC specification # 53-TMSS-01,Rev.0 with the following conditions:

All Type, Special, Routine and Sample tests (including shortcircuit withstand test) as per SEC specifications/standards shallbe carried out on the first batch of power transformer to besupplied to SEC in presence of three SEC Engineers and one (1)

SEC approved independent inspection agency inspector at SEC

approved Independent laboratory, all the related costs forwitnessing the tests will be borne by the manufacturer. This was

confirmed by SC Electroputere SA through letter # 27499 dated14/06/2010.


turnkey project in case of contract award or date of delivery incase of direct material supply order. This was confirmed by SCElectroputere SA through letter 27500 dated 14/06/2010.

SC ELECTROPUTERE SA

Page 6 of 101


7/101



ManufacturersBy SEC

REMARKS

GERMANY-Dresden Yes based on TS&SD letter# 09-01501-03032301 dated 25th May2009 , Siemens AG from Germany-Dresden for PowerTransformer up to 230kV, 200MVA as confirming to SEC

specification # 53-TMSS-01, rev.0 & 53-TMSS-02, rev.0 with thefollowing conditions: All type, special & routine tests for each voltage class asper SEC specifications/standards shall be carried out on the first

batch to be supplied to SEC in securing an order in the presenceof three (3) SEC engineers & one (1) approved independent

inspection agency Inspector. Ten (10) years warranty from the date of PAC of theturnkey project in case of contract award or date of delivery incase of direct material supply order.






28Total =

230 KV PRIMARY41 .


SWEDEN YesABB


SPAIN-Cordoba Yes Based on TS&SD letter# 09-F011657/03-03032301 dated 16th.Aug 2009, it is pre-qualiafied for Power Transformer up to

380kV, 500MVA as confirming to SEC specification #53-TMSS-02, rev.0 with the following conditions: All type, design, special & routine tests (including short

circuit test) as per SEC specifications/standards shall be carriedout on the first unit to be supplied to SEC in securing an order inthe presence of three (3) SEC engineers & one (1) approvedindependent inspection agency Inspector.


ABB Cordoba

GERMANY YesAREVA

TURKEY YesAREVA



Page 7 of 101


8/101



ManufacturersBy SEC

REMARKS


KOREA, Republ ic of-Changwon Yes Based on TS&SD fax#09-F01255/02-03032301 dated 25th. July2009, it is pre-qualified for Power Transformer up to 380kV,500MVA as confirming to SEC specification # 53-TMSS-02, rev.0with the following conditions:

All type, design, special & routine tests as per SECspecifications/standards shall be carried out on the first batch tobe supplied to SEC in securing an o rder in the presence of three

(3) SEC engineers & one (1) approved independent inspection

agency Inspector. Seven (7) years warranty from the date of PAC of theturnkey project in case of contract award or date of delivery in

case of direct material supply order.

HYOSUNG (HICO)




GERMANY-Dresden Yes based on TS&SD letter# 09-01501-03032301 dated 25th May

2009 , Siemens AG from Germany-Dresden for PowerTransformer up to 230kV, 200MVA as confirming to SECspecification # 53-TMSS-01, rev.0 & 53-TMSS-02, rev.0 with thefollowing conditions:

All type, special & routine tests for each voltage class as

per SEC specifications/standards shall be carried out on the firstbatch to be supplied to SEC in securing an order in the presence

of three (3) SEC engineers & one (1) approved independentinspection agency Inspector. Ten (10) years warranty from the date of PAC of theturnkey project in case of contract award or date of delivery in






AUSTRALIA-MELBOURNE Yes UP TO 100 MVA ONLYWILSON TRANSF

17Total =

380KV PRIMARY51 .


SWEDEN YesABB


Page 8 of 101


9/101



ManufacturersBy SEC

REMARKS

SPAIN-Cordoba Yes Based on TS&SD letter# 09-F011657/03-03032301 dated 16th.Aug 2009, it is pre-qualiafied for Power Transformer up to380kV, 500MVA as confirming to SEC specification #

53-TMSS-02, rev.0 with the following conditions: All type, design, special & routine tests (including shortcircuit test) as per SEC specifications/standards shall be carriedout on the first unit to be supplied to SEC in securing an order in



ABB Cordoba

GERMANY YesAREVA

TURKEY Yes First Unit to be Type Tested in the presence of 3 SEC Engineers& 1 SEC approved Independent Inspector; Extended Warranty ofSix years.

AREVA



KOREA, Republ ic of-Changwon Yes Based on TS&SD fax#09-F01255/02-03032301 dated 25th. July2009, it is pre-qualified for Power Transformer up to 380kV,

500MVA as confirming to SEC specification # 53-TMSS-02, rev.0with the following conditions:

All type, design, special & routine tests as per SECspecifications/standards shall be carried out on the first batch to

be supplied to SEC in securing an o rder in the presence of three(3) SEC engineers & one (1) approved independent inspectionagency Inspector.


HYOSUNG (HICO)





AUSTRIA- WEIZ YesSIEMENS TRANSFORMERS AUSTRIA GMBH &

CO KG


14Total =

2 PAD MOUNTED DISTRIBUTION TRANSFORMERS

13.8 KV, 33KV & 34.5 KV PRIMARY12 .

Page 9 of 101


10/101



ManufacturersBy SEC

REMARKS

DIST. TRANSFORMERS UP TO 2 MVA2. 1. 1 51-TMSS-01Applicable Standards:

Saudi Arabia-RIYADH YesABB

Saudi Arabia-RIYADH Yes Based on TS&SD letter # 11-03272-03032301 dated16/11/2011, it is prequalified for Station Service Transformer upto 1.5MVA only as confirming to SEC specification #

51-TMSS-01, Rev.0 with the following conditions:

The following Special Tests as per SECspecifications/standards for Station Service Transformer shall be

conducted on the first batch to be supplied to SEC in case ofcontract award or SEC direct purchase order in SEC approvedindependent laboratory, in presence of three (3) SEC Engineers

and one (1) SEC approved independent inspection agency. Allthe related costs for witnessing of the tests will be borne by themanufacturer:

1. Off-circuit tap changers.2. Determination of capacitance winding to earth and betweenwindings.

3. Determination of transient voltage characteristics.4. Measurement of zero sequence impedance.5. Measurement of the harmonics of the no load current.

6. Measurement of D.C insulation resistance to earth of thewindings (Polarization Index and core).7. Measurement of dissipation factor (Tan Delta) of theinsulation capacitance.

8. Determination of sound levels.

This was confirmed by ALFANAR Electrical Systems(AES)Riyadh through letter # Nil dated 13/03/2011.

Ten (10) years extended warranty from the date of PAC of

the turnkey project in case of contract award or date of deliveryin case of direct material supply order. This was confirmed byALFANAR Electrical Systems (AES)Riyadh through letter # Nildated 09/04/2011.

ALFANAR ELECTRICAL SYSTEMS

United Arab Emirates-ABU DHABI Yes UP TO 1.5 MVA FEDERAL TRANSFORMERS CO.

Croatia/Hrvatska Yes UP TO 2.5 MVA. Complete Type, Routine / Sample tests for first

order & 10 Years Warranty from the date of PAC is required.

KONCAR D&ST

Saudi Arabia-DAMMAM Yes UP TO 13.8 KV ONLY SAUDI TRANSFORMERS CO.

Saudi Arabia-Riyadh YesUnited Transformers Electric Co. (UTEC)

Saudi Arabia-DAMMAM Yes UP TO 13.8 KV ONLY WESCOSA

Page 10 of 101


11/101



ManufacturersBy SEC

REMARKS

7Total =

3 PAD MOUNTED GROUNDING TRANSFORMERS UP TO 2 MVA

13.8 KV, 33KV & 34.5 KV PRIMARY13 .

GROUNDING TRANSFORMERS3. 1. 1 52-TMSS-01Applicable Standards:

--- Yes ALL APPROVED POWER TRANSFOREMER MANUFACTURERS,EXCEPT DISTRIBUTION TRANSFORMER MANUFACTURERS ARE

ALSO ACCEPTABLE FOR GROUNDING TRANSFORMERS

*

United States YesABB


ITALY YesABB ( T& D)

SWITZERLAND-GENEVA YesABB SECHERON


INDIA Yes SUSPENDED FOR SEC 2005 PROJECTS AND ONWARDCROMPTON GREAVES



9Total =

4 DRY TYPE TRANSFORMERS

36 KV PRIMARY14 .

36 KV PRIMARY4. 1. 0 Applicable Standards:

Saudi Arabia YesABB/AEIL

GERMANY YesSIEMENS

Saudi Arabia-DAMMAM YesWESCOSA

3Total =

5 COMPACT SUBSTATION

69KV PRIMARY, 13.8 KV OR 34.5 KV SECONDARY15 .

UNIT SUBSTATION, 69KV PRIMARY, 13.8 KV OR 34.5 KV SECONDARY5. 1. 1 Applicable Standards:

SWITZERLAND-GENEVA YesABB (BBC SECHERON)

Page 11 of 101


12/101



ManufacturersBy SEC

REMARKS


2Total =

110-132 KV PRIMARY, 13.8 KV OR 34.5 KV SECONDARY25 .

UNIT SUBSTATION, 110 - 132 KV PRIMARY, 13.8 KV OR 34.5 KV SECONDARY5. 2. 1 Applicable Standards:


1Total =

6 REACTOR

OIL IMMERSED REACTORS16 .

33 KV TO 69 KV OIL IMMERSED REACTORS6. 1. 1 58-TMSS-01Applicable Standards:

SWEDEN YesABB

TURKEY YesAREVA

FRANCE-(ST. QUEN) YesAREVA_(ST. QUEN)

KOREA, Republic of-Ulsan Yes Based on TS&SD Letter # 10-02438-02-03032301 dated31/08/2010, it is pre-qualified for Shunt Reactor as confirming toSEC specification # 58-TMSS-01, Rev.0 with the following

conditions:

All type/special, routine& sample tests for Shunt Reactorson one unit of each rating supplied to SEC shall be conducted at

Manufacturer's Testing Laboratory in the presence of three (3)SEC engineers & one (1) SEC approved independent inspectionagency Inspector, all the related costs for witnessing the tests

will be borne by the manufacturer. This was confirmed by HHIKorea through letter # S370-1007-052 dated 05/07/2010.

Ten (10) years extended warranty for the proposed Shunt

Reactors from the date of PAC of the turnkey project in case of

contract award or date of delivery in case of direct materialsupply order. This was confirmed by HHI Korea through letter

# S370-1008-0182 dated 18/08/2010.

HYUNDAI





Page 12 of 101


13/101



ManufacturersBy SEC

REMARKS


9Total =

110 KV TO 132 KV REACTORS6. 1. 2 58-TMSS-01Applicable Standards:

SWEDEN YesABB


TURKEY YesAREVA



conditions:





Reactors from the date of PAC of the turnkey project in case ofcontract award or date of delivery in case of direct materialsupply order. This was confirmed by HHI Korea through letter

# S370-1008-0182 dated 18/08/2010.

HYUNDAI






10Total =

230 KV OIL IMMERSED REACTORS6. 1. 3 58-TMSS-01Applicable Standards:

SWEDEN YesABB


TURKEY YesAREVA

Page 13 of 101


14/101



ManufacturersBy SEC

REMARKS


KOREA, Republic of-Ulsan Yes Based on TS&SD Letter # 10-02438-02-03032301 dated31/08/2010, it is pre-qualified for Shunt Reactor as confirming toSEC specification # 58-TMSS-01, Rev.0 with the followingconditions:


Manufacturer's Testing Laboratory in the presence of three (3)

SEC engineers & one (1) SEC approved independent inspectionagency Inspector, all the related costs for witnessing the testswill be borne by the manufacturer. This was confirmed by HHI

Korea through letter # S370-1007-052 dated 05/07/2010.


Reactors from the date of PAC of the turnkey project in case ofcontract award or date of delivery in case of direct materialsupply order. This was confirmed by HHI Korea through letter# S370-1008-0182 dated 18/08/2010.

HYUNDAI






10Total =

380 KV OIL IMMERSED REACTORS6. 1. 4 58-TMSS-01Applicable Standards:

SWEDEN YesABB



Page 14 of 101


15/101



ManufacturersBy SEC

REMARKS


conditions:





Reactors from the date of PAC of the turnkey project in case ofcontract award or date of delivery in case of direct materialsupply order. This was confirmed by HHI Korea through letter

# S370-1008-0182 dated 18/08/2010.

HYUNDAI






9Total =

AIR CORE SERIES REACTOR26 .

230 KV AIR CORE SERIES REACTORS6. 2. 1 58-TMSS-02Applicable Standards:

--- Yes ALL POWER TRANSFORMER AND OIL IMMERSED REACTOR MANUFACTURERS ARE ACCEPTABLE TO SUPPLY AIR CORESERIES REACTORS FROM 13.8KV TO 230 KV

*

Page 15 of 101


16/101



ManufacturersBy SEC

REMARKS

AUSTRIA-Leonding, Linz Yes Based on TS&SD letter 10-01317-1-03032301 dated May 10,2010. TRENCH AUSTRIA GMBH is pre-qualified for Air CoreSeries Reactors as confirming to SEC Specification 58-TMSS-02,

Rev.0 with the following conditions: Extended Warranty: Seven (7) years Extended Warranty shallbe applicable for the Air Core Series Reactors to be supplied toSEC by TRENCH AUSTRIA GMBH as confirmed through their

letter # NIL dated April 28, 2010. Test Witnessing: Factory Tests on the first batch of Reactors tobe supplied to Contract # 10931162/00 and Contract #

10931163/00 for Dynamic Reactive Power CompensationProjects in Central Operating Area shall be conducted inpresence of three (3) SEC Engineers and one (1) IIA Inspector,under the sole expense of the Manufacturer as confirmed

through their Letter Letter # NIL dated April 28, 2010.

TRENCH AUSTRIA GMBH

CANADA-Scarborough, Ontar io Yes Based on TS&SD lette r 10-01317-1-03032301 dated May 10,2010. TRENCH CANADA is pre-qualified for Air Core SeriesReactors as confirming to SEC Specification 58-TMSS-02, Rev.0

with the following conditions: Extended Warranty: Seven (7) years Extended Warranty shallbe applicable for the Air Core Series Reactors to be supplied toSEC by TRENCH CANADA as confirmed through their letter # NIL

dated April 28, 2010. Test Witnessing: Factory Tests on the first batch of Air CoreSeries Reactors to be supplied to Contract # 20931030/00 for

Taif BSP & Kayber/Bawat S/S shall be conducted in presence ofthree (3) SEC Engineers and one (1) IIA Inspector, under thesole expense of the Manufacturer as confirmed through theirLetter # NIL dated April 27, 2010.

Free Replacement: TRENCH CANADA shall supply onecomplete three phase set of Reactors (3 units) to SEC (TaboukCity) free of charge as already confirmed through their letter #

NIL dated November 06, 2009.

TRENCH CANADA

3Total =

AIR CORE REACTORS36 .

230 KV AIR CORE REACTORS6. 3. 1 52-TMSS-02,58-TMSS-02Applicable Standards:

BELGIUM YesALSTOM (T & D) BALTEAU SA (NV)

Uni ted Arab Emira tes-Abu Dhabi Yes L imited to 34 .5kV Only; Fi rst uni t of 34 .5kV Ai r Core Reactorshall be type tested in an independent lab. in the presence of 3SEC Engineers & 1 SEC Approved Independent Inspection

Agency; 10 years of Extended Warranty.

Power Economy Middle East Co.

2Total =

Page 16 of 101


17/101



ManufacturersBy SEC

REMARKS

7 SWITCHGEARS

METAL CLAD SWITCHGEARS17 .

13.8 KV UP TO 34.5 KV7. 1. 1 32-TMSS-01Applicable Standards:


Saudi Arabia Yes For 33kV AIS:

classic ZS3 type with current rating up to 2500A@ 40oC; CBtype VD43620-25(2000A), VD43612-25(1250A & 800A); ES typeEK5, 3007N280.

For 13.8kV AIS: 13.8kV switchgear type UniGear ZS1 (CT on upper & lowerside of CB) with rated current of incomer, Bus Section, Bus Riser

3003A and 1756A, Out Going Feeder with rated current 924Aand 682A @ 40?C, 60Hz, 25kA (3s).

Out Going Feeder (CT on lower side of CB) with rated

current 991A and 648A @ 40?C, 60Hz, 25kA (3s).

CB types (VD4 embedded pole): VD4 17.31-25 (interrupter

G6), ABB Germany and VD4 17.16-25 (interrupter VG4/S), VD4

17.12-25 (interrupter VG4) & VD4 17.06-25 (interrupter VG4),ABB, Italy.

Circuit breaker for Capacitor bank back to back switching(BC2-630A); VD4 17.12-40 (interrupter VG6), HD4 17.12-25(interrupter SF6), HD4 24.12-25 (interrupter SF6), and (BC2-

900A); HD4 17.16-25 (interrupter SF6) ABB, Italy.

Earthing switch type EK6, ABB-EJF, Czech.

CT & VT: ABB-EJF, Czech or WTW make, Germany

Old version: Classic ZS1 .

ABB/AEIL

GERMANY-CALOR EMAG YesABB-CALOR EMAG

Saudi Arabia-JEDDAH Yes For 13.8kV AIS:type 8BK20 with CB type 3AH.for 33kV AIS:type 8BT2 is not acceptable, as the VT is situated in a separatecompartment and connected by cable.

AEL -SIEMENS

Page 17 of 101


18/101



ManufacturersBy SEC

REMARKS

Saudi Arabia-RIYADH Yes Based on TS&SD letter# 09-02613-01-03032301 dated 13thSeptember 2009, ALFANAR ELECTRICAL SYSTEMS from SaudiArabia-Riyadh for 13.8kV Switchgear type NES-H with degree

protection IP4X; vacuum CB (rating 3150A & 1250A) and ESfrom LSIS (South Korea) - details of types are mentioned in theTS&SD letter; as confirming to SEC specification # 32-TMSS-01,rev.0 with the following condition:


ALFANAR ELECTRICAL SYSTEMS

FRANCE-(MACON CEDEX 9) YesAREVA (MACON CEDEX 9)

PORTUGAL YesEFACEC

Poland-Konin Yes based on TS&SD letter# 09-01092-03032301 dated 18th. April2009 it is prequalified for for 13.8kV Air Insulated Switchgear

type D-17P with SCC of 25kA/3sec, degree of protection IP4Xand rated current of 3000A @ 40oC, 60Hz; CB type VD4 whichapproved by SEC from ABB-Germany (3000A) & ABB-Italy(2500A); ES type UMR from ELECTROBUDOWA SA-Poland as

confirming to SEC specification # 32-TMSS-01, rev.0 with Ten(10) years warranty from the date of PAC of the Turnkeyproject in case of contract award or date o f delivery in case of

direct material supply order.

ELEKTROBUDOWA SA

Saudi Arabia-RIYADH Yes For 13.8kV AIS:

Pre-qualified since 24/02/1420H for 13.8kV SWG type MC-Setwith CB type LF3-3150-(2500A), LF2- 2500 (2000A), LF2-1250(800A), LF2-630 (400A) and warranty of (7)years from

commissioning date of the first delivery for any onward projector order in the first two years and then shall be (3)years fromPAC.

for 33kV AIS:Based on TS&SD fax ref.#09-00073-2-03032301 dated04/02/2009. Pre-Qualified for 34.5 kV SWG type(F400NL)1250/2500 A @40C &60Hz with IP4X,SF6 CB type

SF2(France),ES type TFCM(France), & (10)years warranty.old version:33kV AIS type F400G with current rating up to 2500A @ 40oC

with CB type SF & SF2

EPS LTD. (GROUPE SCHNEIDER)


Croatia/Hrvatska Yes LIMITED TO DTA ONLY; FOR CTA PREQUALIFICATION UNDER PROGRESS

KONCAR


United States Yes SWITCHGEAR NOT YET TYPE TESTEDPOWER CON

United States YesS & C

United States YesSIEMENS

Page 18 of 101

METERIAL / EQUIPMENT P Q lifi d


19/101



ManufacturersBy SEC

REMARKS


FRANCE YesVA TECH

Saudi Arabia-DAMMAM YesWESCOSA

18Total =

110 KV TO 132 KV GIS7. 1. 2 32-TMSS-02Applicable Standards:

GERMANY Yes Old Version:145kV GIS type ELK-04 with CB type ELK-SW04, Hydraulic

spring mechanism; DS type ELK-TE0 (3 POS), MES type ELK-TE0(3 POS)/ TE03-DR04; HES type ELK-EB03.

New Version:

Based on TS&SD letter # 11-00455-5-03032301 dated April 04,2011, the new version 145kV GIS type ELK-04 with CB typeELK-CB0 (Hydraulic Spring Mech. HMB-1), DS type

ELK-DE0-3POS, MES type ELK-DE0, HSES type ELK-ES0 (MotorSpring Mech.) is pre-qualified as conforming to SEC specification# 32-TMSS-02, Rev.01 with the following condition:Ten (10) Years Extended Guarantee/Warranty from the date of

PAC of project (in case of contract award) and from date ofdelivery for the direct material supply order. This was confirmed

in writing by ABB Germany via their letter # PTPH/GVS.Nb,10_year-warranty.doc dated May 14, 2010.

ABB

SWITZERLAND YesABB

FRANCE-(AIX-LES BAINS) Yes New version:

145kV GIS type B65 with CB type B65-CBMotor spring mechanism; DS type B65-DS; ES type B65-ES.Old version:

145kV GIS type B95 with CB type BHG 112, Moto r springmechanism; DS Bt212; ES type BE212

AREVA (AIX-LES BAINS)

SWITZERLAND-Oberentfelden Yes 145kV GIS type B65 with CB type B65-CBMotor spring mechanism; DS type B65-DS; ES type B65-ES; HEStype B65-EF.

AREVA T&D AG

KOREA, Republ ic of-Changwon Yes New Mode l approved on 10-04-2007, Model Type HSG-144A145KV GIS with CB type HCSP-144A

Motor spring mechanism; DS type HDMO-144A; MES typeHDMO-144A, HES type HEMS-144A.

All Type and Design tests have been carried out completely &accepted as mentioned in TS&SD letter#08-F02926-03032301dated 22/11/2008.

Provide extended Guarantee/Warranty for Seven(7) Years fromthe date of PACOld version: 145kV GIS type 145HGS40 with CB type145HCB,145PL40; DS type 145SDSV/SDSH; MES type 145SESM;

HES type 145SESA

HYOSUNG (HICO)

Page 19 of 101

METERIAL / EQUIPMENT Pre Qualified


20/101



ManufacturersBy SEC

REMARKS

KOREA, Republic of-Ulsan Yes New version: 145kV GIS type 145SP-1 with CB type 145SP-K1Motor spring mechanism; BDS type 145SP-3PS1; LDS type145SP-3PS2; MES type 145-3PS2; HES type 145SP-LES2.

Old version: 145kV GIS type 145SP with CB type 145SP-KHydraulic mechanism; DS type 145SP-DS; MES type 145SP-ES;HES type 145SP-LES

HYUNDAI

JAPAN Yes New version: 145kV GIS type CFTA with CB type CFPT-120-40L,FAR3 Motor spring mechanism; DS type CFL-120; ES type

CFL-120.Old version: 145kV GIS type CFT with CB type CFPT-140-40L,FAR3,C Pneumatic mechanism; DS type SFL-EA; HES type

SFGM-FA.Old version:145kV GIS type SDA5 (SDA514) with CB type BAK5, Hydraulicmechanism.

JAPAN AE POWER SYSTEMS CORP.

Croatia/Hrvatska Yes GIS & ADAPTORS; LIMITED TO DTA ONLY; FOR CTA

PREQUALIFICATION UNDER PROGRESS

KONCAR

JAPAN-- Yes ORIGINALLY TMT&D CORP. & DISSOLVED DURING APRIL 2005.New version 145kV GIS type 100GMKD with CB type120-SFMT-40CJ; DS type 120GRD/GLD; MES type

120GRED/GRE; HES type 120 GRED/GRE-A.Old version: 145kV GIS 120GMKM with CB type 120-SFMT-40,Pneumatic mechanism; DS type 120-GR-20,

120-GL-20; MES type 120-GRE, 120-GREC; HES type 120-GREA.

Old version: 145kV GIS 100GMKD with CB type 120-SFMT-40CEMotor spring mechanism; DS type 120GLD; HES type 120-GREA.

MITSUBISHI

FRANCE-GRENOBLE Yes New version:145kV GIS type TH7m with CB type TH7m AF8ER(Motor spring);

BDS type CM002, CM003 (3-position); LDS type CM002, CM003(2-position); MES type CM002,CM003; HES type CM002, CM003.Old version: 145kV GIS type HEXABOLIC-TH7 with CB type

DTH7 Hydraulic mechanism; BDS type SITH7; LDS type ITH7, SITH7; ES type ST TH7.

SIEMENS

GERMANY Yes New version: 145kV GIS type 8DN8-II with CB type 8DN8 Motorspring mechanism; DS type 8DN8; ES type 8DN8.Old version: 145kV GIS type 8DN8 with CB type 8DN6(P1) Motor

spring mechanism; DS type 8DN8; ES type 8DN8.

SIEMENS

JAPAN-- Yes ORIGINALLY TMT&D CORP. & DISSOLVED DURING APRIL 2005.

145kV GIS type with CB type GSPK-145AP; BDS typeKTM-120PW, DTM-120PW, DLM-120PW; LDS type KTM-120PW,

DTM-120PW; MES type EBM-120W; HES type EAP-120W.

TOSHIBA CORPORATION, T&D

12Total =

230 KV -GIS7. 1. 3 32-TMSS-02Applicable Standards:

Page 20 of 101

METERIAL / EQUIPMENT Pre-Qualified


21/101



ManufacturersBy SEC

REMARKS

SWITZERLAND Yes 230kV GIS type ELK SP2-1 with CB type ELK SP2-1; BDS typeELK-TE/ ELK-TW/ELK-TV; MES type ELK EM/ELK-EA; HES typeELK EB.

ABB

FRANCE-(AIX-LES BAINS) Yes 230kV GIS type T105 with CB type B105-CB; DS type CLTAREVA (AIX-LES BAINS)

JAPAN Yes 230kV GIS type MFPT MFPTB-300-63L with CB typeMFPTB-300-63LA, HAR/

MFTB-300-563L; BDS type FL-EA, LDS type FMG-FA/FG.

JAPAN AE POWER SYSTEMS CORP.


GERMANY-Berlin Yes Old Version 230kV GIS type 8DN40-8DN4 with CB 8DN401-8DN4; BDStype 8DN4-8DQ1; LDS type 8DP4; MES type 8DN4; HES type8DP4.

Based on SIEMENS letter# 30179023-A1 dated02/05/2011, this type is already obsolete/phased out.

New VersionBased on TS&SD letter # 11-00267/01-03032301 dated02/02/2011, it is pre-qualified for 300kV GIS type 8DN9, rated

current 4000A, short time current rating of 63kA, CB (SingleBreak) type 8DN9-300-63-4000 with motor spring mechanism,Busbar & line DS type 8DN9-300-63-4000 with motor drive

mechanism, MES type 8DN9-300-63-with motor drive

mechanism & HES type 8DN9-300-63-4000 with motor drivemechanism as confirming to SEC specification #32-TMSS-02,Rev.01, with the following conditions:

Ten (10) years extended warranty starting from project"Safaniyah 380/230kV project" as confirmed through SIEMENS

letter # PQ_8DN9_02 dated 26/06/2010.

This GIS shall only be used for 245kV, 63kA applications.

SIEMENS

FRANCE-GRENOBLE YesSIEMENS


7Total =

380 KV - GIS7. 1. 432-TMSS-02Applicable Standards:

SWITZERLAND Yes 420kV GIS type ELK-03 with CB type ELKSP-3 DOUBLE BREAK,Spring Hydraulic Charged mechanism, BDS type ELKT, LDS typeELKT, MES type ELK EM3, MES type ELK EB3

ABB

FRANCE-(AIX-LES BAINS) Yes 420kV GIS type T155 with CB type FB2T (Hydrolic Mech.)AREVA (AIX-LES BAINS)

Page 21 of 101



22/101


DESCRIPTION MANUFACTURER FACTORY LOCATIONPre Qualified

ManufacturersBy SEC

REMARKS

KOREA, Republ ic of-Changwon Yes Based on TS&SD lette r # 10-F-02299/02-03032301 dated25/10/2010, it is pre-qualified for 420kV GIS type HSG 426A,63kA, CB (Single Break) type HCHY 426A with Hydraulic

Mechanism, Busbar DS type HDMO 426A, Line DS type HDMO426B,ES type HEMO 426A&H-ES type HEMS 426A asconfirming to SEC specification # 32-TMSS-02,Rev.01, with thefollowing conditions:

Supply one complete spare bay" free of charge" (for notrepeating the short circuit test of circuit breaker type HCHY

426A) on the first supply of 420kV GIS type HSG 426A to SEC.This was confirmed in writing by Hyosung Corp (Korea) throughletter #Nil dated 28th December 2009.

Repeat/carry out the temperature rise test at 55?C (it wascarried out before at 50?C) of the main circuit on the first supplyof the 420kV GIS type HSG 426A to SEC. This was confirmed in

writing by Hyosung Corp (Korea) through letter #HS-420GIS-100830-1 dated 30th August 2010.

Back to back switching tests for the capacitor bank shall be

conducted in an independent test laboratory whenever there isproject requirement. This was confirmed in writing by HyosungCorp (Korea) through letter #HS-420GIS-100830-1 dated 30th

August 2010.

Ten (10) years extended warranty for the proposed 420kVGIS type HSG 426A from the date of PAC of the turnkey project

in case of contract award or date of delivery in case of directmaterial supply order. This was confirmed in writing by HyosungCorp (Korea) through letter #HS-420GIS-100830-1 dated 30th

August 2010.

HYOSUNG (HICO)

KOREA, Republic of-Ulsan Yes 420 kV; 63kA; TYPE-550 SR; CB-550 SR-K (Single Break);DS-550 DRM 1&2; ES-550 ERM; HES-550 LES; back to backcapacitor switching test for C.B. shall be done in independentlaboratory iin the presence of SEC Engineers whenever there is a

requirment for this test iin th PTS of forthcoming SEC projects.- 10 Years extended warranty.

HYUNDAI

JAPAN Yes 420kV GIS type 1FTJAPAN AE POWER SYSTEMS CORP.


FRANCE-GRENOBLE Yes 420kV GIS type YGII with CB type SPD; DS ype YGIISIEMENS

United Kingdom-HEBBUM YesSIEMENS

Page 22 of 101



23/101


DESCRIPTION MANUFACTURER FACTORY LOCATIONQ

ManufacturersBy SEC

REMARKS

GERMANY Yes New version: 550kV GIS typ 8DQ1 with CB type 8dQ1-P2; DStype 8DQ1; ES type 8DQ1. with ten (10) years extendedwarranty from the date o f Provisional Acceptance Certificate

(PAC) of the Turnkey project (In case of contract award) andfrom the date of delivery for the direct material supply order.The guarantee/warranty shall cover all the cost of materials andlabor as per warranty/guarantee of materials and workmanship

and subsequently reduced yearly in case of future project award.old version: 420kV GIS type 8DQ1 with CB type 8DQ1-T2,DOUBLE BREAK, Hydraulic mechanism; DS type 8QD1

SIEMENS

JAPAN-- Yes ORIGINALLY TMT&D CORP. & DISSOLVED DURING APRIL 2005.Old virsion: 420kV GIS type GID with CB type GSR400R2B/GSRK, DOUBLE BREAK, Hydraulic mechanism.

TOSHIBA CORPORATION, T&D

10Total =

33 KV GIS7. 1. 5 Applicable Standards:

GERMANY Yes Based on TS&SD Letter # 10-02461-02-03032301 dated31/08/2010, it is pre-qualified for 36kV GIS type 8DA10,ratedcurrent 2500A,short time current rating of 25kA(3sec) ,CB type

3AH with interrupter type VS 30040 (40kA) as confirming to SECspecification # 32-TMSS-03, Rev.0 with the following conditions:

Capacitor bank back to back switching tests in case of non

availability of test report shall be conducted in an independenttesting laboratory in the presence of three (3) SEC engineers &one (1) SEC approved independent inspection agency Inspector,

all the related costs for witnessing the tests will be borne by themanufacturer, in case there is a need of capacitor bankapplication. This was confirmed by Siemens through letter #8DA10_PQR_R1 dated 25/08/2010.

Seven (7) years extended warranty for the proposed 36kVGIS ,type 8DA10 from the date of PAC o f the turnkey project in

case of contract award or date of delivery in case of directmaterial supply order. This was confirmed by Siemens troughletter # 8DA10_PQR_R1 dated 25/08/2010.

SIEMENS

1Total =

8 BATTERY EQUIPMENT

BATTERY LEAD ACID18 .

BATTERY LEAD ACID8. 1. 0 46-TMSS-01Applicable Standards:

GERMANY YesBAE BERLINER BATTERIE FABRIK- G

Page 23 of 101


MANUFACTURER FACTORY LOCATIONPre-Qualified

REMARKS


24/101

SER/ Q

DESCRIPTION MANUFACTURER FACTORY LOCATION ManufacturersBy SEC

REMARKS

United States YesC & D

FRANCE YesCEAC

FRANCE-- Yes PREVIOUSLY KNOWN AS HAWKER S.A.R.L - FRANCE; FIVE

YEARS OF EXTENDED WARRANTY

ENERSYS S.A.R.L.

United States YesEXIDE

ITALY YesFIAMM

United States YesGOULD (GNB)

GERMANY YesHOPPECKE

SLOVENIA YesTOVARNA AKUMULATORSKIH BATERIJ

United Kingdom YesTUNGSTONE (HAWKER TUNGSTONE)

GERMANY YesVARTA

JAPAN YesYUASA

12Total =

BATTERY LEAD ACID, VALVE REGULATED LEAD ACID (VRLA)28 .

BATTERY LEAD ACID, VALVE REGULATED LEAD ACID (VRLA)8. 2. 0 46-TMSS-04Applicable Standards:

FRANCE-- Yes originally was SAFT Power System SAS-FranceAEG Power Solutions SAS


United Kingdom YesCHLORIDE (HAWKER CHLORIDE)

ITALY YesFIAMM

United States YesGNB

United Kingdom YesHAWKER LTD.

GERMANY YesHOPPECKE

GERMANY YesSAB

United States YesSEC

GERMANY YesVARTA

United States YesYUASA EXIDE

11Total =

BATTERY NICKEL CADMIUM (NiCD)38 .

BATTERY NICKEL CADMIUM (NiCD)8. 3. 0 46-TMSS-06Applicable Standards:

Page 24 of 101


MANUFACTURER FACTORY LOCATIONPre-Qualified

REMARKS


25/101

SER DESCRIPTION MANUFACTURER FACTORY LOCATION ManufacturersBy SEC

REMARKS

SWEDEN YesALCAD

FRANCE YesCHLORIDE

SPAIN YesEMISA


GERMANY Yes MERGED WITH SAFT NIFE -SWEDENFRIWO

GERMANY-Zwickau Yes Based on TS&SD fax ref.#08-F02675/03-03032301 dated10/01/2009. Pre-Qualified for Nicd Battery with this conditions:

-First batch shall be type tested in Independent Laboratory iinpresence of (3) SEC engineers & (1) independent inspector.-(07) years warranty

GAZ Gerate- und Akkumulatorenwerk ZwickauGmbH

United States YesGNB

SWEDEN Yes 370 TO 1390AHSAFT-NIFE

GERMANY YesVARTA HAWKER

9Total =

BATTERY CHARGER48 .

BATTERY CHARGER8. 4. 1 46-TMSS-02Applicable Standards:

FRANCE YesAEES

FRANCE-- Yes Originally was SAFT Power System SAS-FranceAEG Power Solutions SAS

FRANCE YesBENNING

GERMANY-- Yes Previously "Theo-Benning-Germany", the name has beenchanged to Benning Elektrotechnik & Elektronik GmbH & Co. KG-Germany based on TS&SD/ESD letter # 11-00334-03032301

dated 30/01/2011.

Benning Elektrotechnik & Elektronik GmbH &Co.kG.


ITALY-BIBIENA Yes Based on TS&SD letter# 09-F001363/02-03032301 dated 2nd.

May 2009 as confirming to SEC specifications # 46-TMSS-02,rev.0 ; with the following conditions: All tests shall be carried out on the first batch of Battery

Charger or UPS to be supplied to SEC in securing an order in themanufacturer's testing laboratory in the presence of three (3)SEC engineers & one (1) approved independent inspectionagency Inspector.


CEG

FRANCE YesCHLORIDE

Page 25 of 101


SC O MANUFACTURER FACTORY LOCATIONPre-Qualified

M f t REMARKS


26/101


REMARKS

SPAIN YesEMISA (ELECTRO MERCANTIL INDUSTRIALS.A. SPAIN)

United Kingdom YesERSKINE


SWITZERLAND YesGUTOR ELECTRONIC LTD.

11Total =

UPS, 5 THROUGH 100KVA8. 4. 2 46-TMSS-03Applicable Standards:

ITALY-BIBIENA Yes Based on TS&SD letter# 09-F001363/02-03032301 dated 2nd.

May 2009 as confirming to SEC specifications # 46-TMSS-03,rev.0 ; with the following conditions: All tests shall be carried out on the first batch of BatteryCharger or UPS to be supplied to SEC in securing an order in the

manufacturer's testing laboratory in the presence of three (3)SEC engineers & one (1) approved independent inspectionagency Inspector.


CEG

SWITZERLAND YesGUTOR ELECTRONIC LTD.

2Total =

BATTERY CHARGER, 48 VDC8. 4. 3 46-TMSS-02,46-TMSS-05Applicable Standards:

FRANCE Yes ACCEPTABLE FOR APPLICATIONS OTHER THAN TELECOMAEES

FRANCE-- Yes originally was SAFT Power System SAS-FranceAEG Power Solutions SAS

FRANCE YesBENNING

ITALY Yes FOR TELECOM APPLICATIONSBRAGA MORO

FRANCE YesCHLORIDE

AUSTRALIA-ALPHA Yes SWITCH MODE RECTIFIERS / BATTERY CHARGERS ONLY FORTELECOM APPLICATION.

COM 10 INTERNATIONAL PTY. LTD.

SPAIN YesEMISA (ELECTRO MERCANTIL INDUSTRIALS.A. SPAIN)

Page 26 of 101



Manufacturers REMARKS


27/101


REMARKS

United Kingdom Yes Based on TS&SD letter# 09-F02210/03-03032301 dated 1st .September 2009, ERSKIN System Ltd. (a division of Dale PowerSolution plc) from United Kingdom-Scarborough for 48V DC

battery Charger as confirming to SEC specification #46-TMSS-05, rev.0 with the following conditions: All type, design, special & routine tests as per SECspecifications/standards shall be carried out on the first batch to

be supplied to SEC in securing an o rder in the manufacturer'slaboratory in the presence of three (3) SEC engineers & one (1)approved independent inspection agency Inspector.


ERSKINE

United States Yes SCR TYPE ONLY EXIDE

United Kingdom Yes .HAMMER & SIMMONS

United States Yes SWITCH MODE RECTIFIERS ONLY FOR TELECOMAPPLICATIONS

T.D.I

11Total =

9 LV DISTRIBUTION PANELS

AC & DC DIST. PANELS19 .

AC & DC DIST. PANELS9. 1. 0 31-TMSS-02Applicable Standards:


Saudi Arabia-RIYADH YesALFANAR ELECTRICAL SYSTEMS

Saudi Arabia-DAMMAM YesEAST & WEST FACTORY

Saudi Arabia-DAMMAM YesELECTRICAL PANEL BOARD FACTORY/HAWATRADING

Saudi Arabia-RIYADH YesEPS LTD. (GROUPE SCHNEIDER)

United Arab Emirates-DUBAI Yes Ten (10) years warranty from the date of PAC of the

turnkey project in case of contract award or date of delivery incase of direct material supply order.

ETA-PCS

Page 27 of 101





28/101


REMARKS

Saudi Arabia-Riyadh Yes Based on TS&SD letter #11-F03210/01-03032301 dated29/11/2011, it is pre-qualified for AC&DC Panels as confirming toSEC specification # 31-TMSS-02, Rev.0 with the following

conditions:

All type, special, routine and sample tests as per SECspecifications/standards shall be carried out on the first batch of

AC&DC Panels to be supplied to SEC in case of securing an orderin the presence of three (3) SEC Engineers & one (1) approvedindependent inspection agency Inspector in an independent

testing laboratory. All the related costs for witnessing the testswill be borne by the manufacturer. This was confirmed byMEMF-ETA Switchgear Manufacturing Company through letter #Nil dated 14/02/2011.

Ten (10) years extended warranty from the date of PAC ofthe turnkey project in case of contract award or date of delivery

in case of direct material supply order. This was confirmed byMEMF-ETA Switchgear Manufacturing Company through letter #Nil dated 08/12/2010.

MEMF-ETA Switchgear Manufacturing Company

Saudi Arabia-RIYADH YesMOHAMMAD AL OJAIMI FACTORY

Saudi Arabia-RIYADH YesMUSAID SWITCHGEAR

Saudi Arabia-DAMMAM YesREMAL

Saudi Arabia-JEDDAH YesSIEMENSSaudi Arabia-Dammam Yes Based on TS&SD Letter # 11-01751/01-03032301 dated

27/06/2011, it is pre-qualified for Auxiliary AC & DC Panels up to132kV only as confirming to SEC specification # 31-TMSS-02,Rev.0 with the following conditions:

All type, special, routine and sample tests as per SECspecifications/standards shall be carried out on the first batch of

each type of Auxiliary AC&DC Panels to be supplied to SEC incase of securing an order in the presence of three (3) SECengineers & one (1) approved independent inspection agencyInspector in an independent testing laboratory. All the related

costs for witnessing the tests will be borne by the manufacturer.This was confirmed by WESCOSA-Dammam through letter # Nildated 18/05/2010.

Ten (10) years extended warranty from the date of PAC of theturnkey project in case of contract award or date of delivery incase of direct material supply order. This was confirmed by

WESCOSA-Dammam through letter # Nil dated 30/08/2010.

Waha Electric Supply Co. of Saudi Arabia-(WESCOSA)-Dammam

12Total =

10 LOAD BREAK SWITCHES UPTO 34.5 KV & RING MAIN UNITS, 15 KV

Page 28 of 101





29/101

DESCRIPTION ManufacturersBy SEC

LOAD BREAK SWITCHES UPTO 34.5 KV110 .

LOAD BREAK SWITCHES UPTO 34.5 KV10. 1. 0 Applicable Standards:


FRANCE YesAREVA


GERMANY YesFRITZ DRIESCHER

JAPAN YesHITACHI

Croatia/Hrvatska YesKONCAR

GERMANY YesSIEMENS

7Total =

RMU, 15 KV210 .

RMU, 15 KV10. 2. 0 32-TMSS-07Applicable Standards:


FRANCE YesAREVA


GERMANY YesFRITZ DRIESHER KG

Saudi Arabia-DAMMAM YesGULF REYROLLE LTD

FRANCE YesMERLIN GERIN

Saudi Arabia-AL KHOBAR YesSAUDI LUCY

GERMANY-FRANKFURT YesSIEMENS AG EVM

Saudi Arabia-DAMMAM YesTHE INTERNATIONAL ELECTRICAL PRODUCTSCO.

United Kingdom YesW. LUCY

10Total =

SPARE PARTS FOR RMU & EOS310 .

SPARE PARTS FOR RMU & EOS10. 3. 0 Applicable Standards:

BAHRAIN YesCELLMEC

Page 29 of 101





30/101

DESCRIPTIONBy SEC

1Total =

11 NEUTRAL EARTHING RESISTORS UP TO 33 KV

NER, UP TO 33 KV111 .

NER, UP TO 33 KV11. 1. 0 57-TMSS-01Applicable Standards:

United Kingdom YesCRESSAL RESISTOR

United Kingdom YesFURSE

FRANCE-- Yes EXTENDED GUARANTEE / WARRANTY FOR 10 YEARSM.S.Resistances

FRANCE YesMETAL DEPLOYE

INDIA YesNATIONAL

5Total =

12 BARE CONDUCTORS

TYPE ACAR / ACSR / AAAC112 .

BARE CONDUCTOR, ACAR / ACSR / AAAC12. 1. 1 10-TMSS-01Applicable Standards:

United States YesALCOA

INDIA-NALAGARH Yes Based on TS&SD Letter # 10-01566-2-03032300 dated

14/06/2010, it is pre-qualified for Bar Conductors as confirmingto SEC specification # 10-TMSS-01, Rev.01 with the followingconditions:

The first batch of each type of conductors to be supplied toSEC shall be type tested in an independent accredited test

laboratory in the presence of three (3) SEC engineers & one (1)SEC approved independent inspection agency Inspector and allcost pertaining to the tests shall be borne by the manufacturer.This has been confirmed in writing by the manufacturer, through

letter # AIL/BRD/PQ/SEC/19 dated 22nd May 2010.

Ten (10) years warranty from the date of PAC of the

turnkey project in case of contract award or date of delivery incase of direct material supply order. This has been confirmed inwriting by the manufacturer; through letter # AIL/BRD/SEC/PQ/19 dated 22nd May 2010.

APAR Industries Ltd-NALAGARH

Page 30 of 101





31/101

By SEC

INDIA-SILVASSA Yes Based on TS&SD Letter # 10-01566-2-03032300 dated14/06/2010, it is pre-qualified for Bar Conductors as confirmingto SEC specification # 10-TMSS-01, Rev.01

with the following conditions:

The first batch of each type of conductors to be supplied toSEC shall be type tested in an independent accredited test

laboratory in the presence of three (3) SEC engineers & one (1)SEC approved independent inspection agency Inspector and allcost pertaining to the tests shall be borne by the manufacturer.

This has been confirmed in writing by the manufacturer, throughletter # AIL/BRD/PQ/SEC/19 dated 22nd May 2010.

Ten (10) years warranty from the date of PAC of the

turnkey project in case of contract award or date of delivery incase of direct material supply order. This has been confirmed inwriting by the manufacturer; through letter # AIL/BRD/

SEC/PQ/19 dated 22nd May 2010.

APAR Industries Ltd-SILVASSA

BAHRAIN-MANAMA YesMIDAL CABLE LTD.

MUSCAT-- Yes FIRST LOT OF EACH TYPE SHALL BE TYPE TESTED IN AN

INDEPENDENT LABORATORY PER 10-TMSS-01 & OTHER INTL.STANDARDS, IN PRESENCE OF SEC ENGINEERS AND ALL COSTSHALL BE BORNE BY THE MANUFACTURER.10 YEARS

EXTENDED WARRANTY.

OMAN CABLE INDUSTRIES

Saudi Arabia-RIYADH YesRIYADH CABLESSaudi Arabia-JEDDAH YesSAUDI CABLE

United States YesSOUTHWIRE

INDIA-- Yes Based on TS&SD Letter # 10-F001691/01-03032301 dated19/06/2010, it is pre-qualified for Bare Conductors types (ACAR,

ACSR & AAAC) as confirming to SEC specification # 10-TMSS-01Rev.01 with the following conditions:

ACAR and ACSR conductors are successfully type tested inaccredited laboratory in presence of SEC Engineers withacceptable results.

For AAAC conductors, type, special, routine and sampletests shall be conducted on the first batch in an independentaccredited test laboratory in the presence of three (3) SEC

engineers & one (1) SEC approved independent inspectionagency Inspector and all cost pertaining to the tests shall beborne by the manufacturer.


STERLITE (INDIA)

Page 31 of 101



ManufacturersB SEC

REMARKS


32/101

By SEC

9Total =

TYPE ACSR/AW212 .

BARE CONDUCTOR, ACSR/AW12. 2. 1 10-TMSS-01Applicable Standards:


INDIA-NALAGARH Yes Based on TS&SD Letter # 10-01566-2-03032300 dated

14/06/2010, it is pre-qualified for Bar Conductors as confirmingto SEC specification # 10-TMSS-01, Rev.01 with the followingconditions:

The first batch of each type of conductors to be supplied to

SEC shall be type tested in an independent accredited testlaboratory in the presence of three (3) SEC engineers & one (1)SEC approved independent inspection agency Inspector and all

cost pertaining to the tests shall be borne by the manufacturer.This has been confirmed in writing by the manufacturer, throughletter # AIL/BRD/PQ/SEC/19 dated 22nd May 2010.

Ten (10) years warranty from the date of PAC of theturnkey project in case of contract award or date of delivery incase of direct material supply order. This has been confirmed in

writing by the manufacturer; through letter # AIL/BRD/SEC/PQ/19 dated 22nd May 2010.


INDIA-SILVASSA Yes Based on TS&SD Letter # 10-01566-2-03032300 dated14/06/2010, it is pre-qualified for Bar Conductors as confirmingto SEC specification # 10-TMSS-01, Rev.01 with the following

conditions:

The first batch of each type of conductors to be supplied to

SEC shall be type tested in an independent accredited testlaboratory in the presence of three (3) SEC engineers & one (1)SEC approved independent inspection agency Inspector and allcost pertaining to the tests shall be borne by the manufacturer.

This has been confirmed in writing by the manufacturer, throughletter # AIL/BRD/PQ/SEC/19 dated 22nd May 2010.

Ten (10) years warranty from the date of PAC of theturnkey project in case of contract award or date of delivery incase of direct material supply order. This has been confirmed inwriting by the manufacturer; through letter # AIL/BRD/

SEC/PQ/19 dated 22nd May 2010.


Saudi Arabia-JEDDAH YesJEDDAH CABLE CO.


Page 32 of 101



ManufacturersBy SEC

REMARKS


33/101

By SEC

MUSCAT-- Yes FIRST LOT OF EACH TYPE SHALL BE TYPE TESTED IN ANINDEPENDENT LABORATORY PER 10-TMSS-01 & OTHER INTL.STANDARDS, IN PRESENCE OF SEC ENGINEERS AND ALL COST

SHALL BE BORNE BY THE MANUFACTURER.10 YEARSEXTENDED WARRANTY.


Saudi Arabia-RIYADH YesRIYADH CABLES

Saudi Arabia-JEDDAH YesSAUDI CABLE


INDIA-- Yes Based on TS&SD Letter # 10-F001691/01-03032301 dated19/06/2010, it is pre-qualified for Bare Conductors type(ACSR/AW) as confirming to SEC specification # 10-TMSS-01Rev.01 with the following condition:


STERLITE (INDIA)

10Total =

GROUND WIRE312 .

GROUND WIRE12. 3. 1 10-TMSS-03Applicable Standards:


INDIA-NALAGARH Yes Based on TS&SD Letter # 10-01566-2-03032300 dated14/06/2010, it is pre-qualified for Overhead Ground Wire (OGW)of Aluminum Clad Steel (ACS) Type only as confirming to SEC

specification # 10-TMSS-03, Rev.0 with the following conditions:

The first batch of Aluminum Clad Steel (ACS) type to besupplied to SEC shall be type tested in an independent

accredited test laboratory in the presence of three (3) SECengineers & one (1) SEC approved independent inspectionagency Inspector and all cost pertaining to the tests shall be

borne by the manufacturer. This has been confirmed in writingby the manufacturer through letter # AIL/BRD/PQ/SEC/19 dated22nd May 2010.


writing by the manufacturer through letter # AIL/BRD/SEC/PQ/19 dated 22nd May 2010.


Page 33 of 101



ManufacturersBy SEC

REMARKS


34/101

By SEC

INDIA-SILVASSA Yes Based on TS&SD Letter # 10-01566-2-03032300 dated14/06/2010, it is pre-qualified for Overhead Ground Wire (OGW)of Aluminum Clad Steel (ACS) Type only as confirming to SEC


The first batch of Aluminum Clad Steel (ACS) type to besupplied to SEC shall be type tested in an independent

accredited test laboratory in the presence of three (3) SECengineers & one (1) SEC approved independent inspectionagency Inspector and all cost pertaining to the tests shall be

borne by the manufacturer. This has been confirmed in writingby the manufacturer through letter # AIL/BRD/PQ/SEC/19 dated22nd May 2010.


writing by the manufacturer through letter # AIL/BRD/SEC/PQ/19 dated 22nd May 2010.


SPAIN YesECN CG SA

JAPAN YesJ-POWER SYSTEM CORP.


Saudi Arabia-RIYADH YesRIYADH CABLES

Saudi Arabia-JEDDAH YesSAUDI CABLE


FRANCE YesTREFILEUROPE

10Total =

COPPER CLAD, STEEL GROUNDING CONDUCTOR & GROUNDING ROD412 .

COPPER CLAD STEEL GROUNDING CONDUCTOR AND GROUNDING ROD12. 4. 1 10-TMSS-05Applicable Standards:

United States-Statesvi lle, NC YesComScope Bimetals USA

United Kingdom-Nottingham Yes Including Exothermic Welding and Grounding connectors .FM Sudafix

Saudi Arabia YesFURSE

CHINA YesGANSEC SHENGYUEAN WIRE & CABLE CO.LTD.

SOUTH KOREA YesILJIN CORP./JIWOONG ELECTRIC CO.

United States YesLTV COPPERWELD

Saudi Arabia-JEDDAH YesSAUDI ELECTRIC INDUSTRIES CO. LTD.

Page 34 of 101



ManufacturersBy SEC

REMARKS


35/101

By SEC

7Total =

COMPOSITE OPTICAL OH GROUND WIRE (OPGW)512 .

OPGW12. 5. 1 10-TMSS-04Applicable Standards:

United Kingdom-- Yes PREVIOUSLY ALCOA FUJIKURA LTD (AFL).AFL TELECOMMUNICATIONS EUROPE LTD

GERMANY-Monchengladbach Yes EXTENDED GUARANTEE/WARRANTY FOR A PERIOD OF 10YEARS.

Previously Draka Comteq Germany GmbH & KG.

AFL Telecommunications GmbH

SWITZERLAND YesBRUGG TELECOM AG

United Kingdom-PRESCOT YesCORNING CABLES (BICC)

FINLAND YesDRAKA NK

JAPAN YesFUJIKURA

JAPAN YesFURUKAWA ELECTRIC CO. LTD.

CHINA-Nantong Yes Based on TS&SD Letter # 10-01654-03032301 dated05/06/2010, it is pre-qualified for OPGW as confirming to SEC


The first batch of each types of OPGW to be supplied toSEC shall be type tests in an independent testing laboratory inthe presence of three (3) SEC engineers & one (1) SEC approvedindependent inspection agency Inspector and all cost pertainingto the tests shall be borne by manufacturer .All type/design,

routine/sample and special tests per SEC material specificationnumber 10-TMSS-04, Rev.0 shall be conducted. This wasconfirmed in writing by the manufacturer through letter# Nil

dated 18th June 2009.

Ten (10) years warranty from the date of PAC of theturnkey project in case of contract award or date of delivery in

case of direct material supply order. This was confirmed inwriting by the manufacturer through letter # Nil dated 18th June2009.

Jiangsu Zhongtian Technology Co.Ltd (ZTT)-China

Page 35 of 101



ManufacturersBy SEC

REMARKS


36/101

y

KOREA, Republic of Yes Based on TS&SD letter # 10-02583-03032301 dated19/09/2010, it is pre-qualified for OPGW as confirming to SECspecification # 10-TMSS-04,Rev.0, with the following conditions:

All type/design; routine/sample and special tests per SECmaterial specification # 10-TMSS-04, Rev.0 of first batch of eachtypes of OPGW to be supplied to SEC shall be conducted in an

independent testing laboratory in the presence of three (3) SECengineers & one (1) SEC approved independent inspectionagency Inspector and all cost pertaining to the tests shall be

borne by Manufacturer. This was confirmed in writing by themanufacturer through letter #Nil dated 24th December 2009.

Ten (10) years extended warranty for each types of OPGWfrom the date of PAC of the turnkey project in case of contractaward or date of delivery in case of direct material supply order.

This was confirmed in writing by the manufacturer through letter#Nil dated 24th December 2009.

LS CABLES

CANADA YesPHILLIPS FITEL

ITALY YesPIRELLI

SPAIN Yes PREVIOUSLY "PIRELLI"PRYSMIAN TELECOM

KOREA, Republic of Yes Based on TS&SD letter# 09-F00730/03-03032301 dated 24th

August 2009, Taihan Electric Wire Co. Ltd. from SouthKorea-Anyang for OPGW as confirming to SEC specification #10-TMSS-04, rev.0 with the following conditions:

All type, design, special & routine tests as per SECspecifications/standards shall be carried out on the first batch tobe supplied to SEC in securing an o rder in the manufacturer'slaboratory in the presence of three (3) SEC engineers & one (1)

approved independent inspection agency Inspector. Ten (10) years warranty from the date of PAC of theturnkey project in case of contract award or date of delivery in


TAIHAN ELECTRIC WIRE COMPANY

13Total =

HEAT RESISTANT ALUMINUM ALLOY CONDUCTOR612 .

HEAT RESISTANT ALUMINUM ALLOY CONDUCTOR12. 6. 1 10-TMSS-06Applicable Standards:

JAPAN Yes IT IS A CONSORTIUM OF FUJIKURA & FURUKAWA. ONLY INVAR CONDUCTORS PER CLAUSE 1.3 & 1.4 OF 10-TMSS-06. FIRST

LOT TO BE TYPE TESTED IN THE PRESENCE OF 3 SEC ENGRSAND IIA INSPECTOR; EXTENDED WARRANTY FOR 10 YEARS.

FUJIKURA VISCAS CORP

JAPAN Yes Based on TS&SD letter# 09-00649-1-03032301 dated 28 March2009 it is pre-qualified for GTACSR & GZTACSR.

J-POWER SYSTEM CORP.

Page 36 of 101



ManufacturersBy SEC

REMARKS


37/101

KOREA, Republic of Yes Based on TS&SD letter # 10-02584-03032301 dated19/09/2010, it is pre-qualified for Heat Resistance AluminumAlloy Conductors, Gap& Non Gap type as confirming to SEC

specification # 10-TMSS-06,Rev.0, with the following conditions:

All type/design; routine/sample and special tests per SECmaterial specification # 10-TMSS-06, Rev.0 of first batch of each

types of Heat Resistance Aluminum Alloy Conductors to besupplied to SEC shall be conducted in an independent testinglaboratory in the presence of three (3) SEC engineers & one (1)

SEC approved independent inspection agency Inspector and allcost pertaining to the tests shall be borne by Manufacturer. Thiswas confirmed in writing by the manufacturer through letter #Nildated 08th January 2010.

Ten (10) years extended warranty for each types of HeatResistance Aluminum Alloy Conductors from the date of PAC of

the turnkey project in case of contract award or date of deliveryin case of direct material supply order. This was confirmed inwriting by the manufacturer through letter #Nil dated 08thJanuary 2010.

Full time presence of LS-Korea expert during execution of

first order with Gap type conductor for guidance and training ofSEC/Contractor staff about installation of this t ype of conductoras confirmed through LS letter # LS/LHJ-100526/00 dated 26thMay 2010.

Full technical support will be provided to SEC duringoperation of Gap Conductors for minimum five (5) years period

from first project as confirmed through LS letter # LS/LHJ-100526/00 dated 26th May 2010.

LS CABLES

3Total =

13 INSULATED CONDUCTOR CABLE (XLPE)

13.8 KV113 .

XLPE CABLE 13.8 KV13. 1. 1 Applicable Standards:

United Arab Emirates-DUBAI Yes Including Joints & TerminationsDUBAI CABLE CO.

EGYPT-- Yes Including Joints & TerminationsELSEWEDY EGYTECH CABLE CO.

Saudi Arabia-JEDDAH Yes Including Joints & TerminationsJEDDAH CABLE CO.

KOREA, Republic of Yes PREVIOUSLY LG; Including Joints & TerminationsLS

Page 37 of 101



ManufacturersBy SEC

REMARKS


38/101

MUSCAT-- Yes Ref# is 08-02531/01-0303230 dated 08/11/2008no accessories are pre-qualified


Saudi Arabia-RIYADH Yes Including Joints & TerminationsRIYADH CABLES

Saudi Arabia-JEDDAH Yes Including Joints & TerminationsSAUDI CABLE

KOREA, Republic of Yes Including Joints & TerminationsTAIHAN ELECTRIC WIRE COMPANY

8Total =

33 & 34.5 KV213 .

XLPE CABLE 33 & 34.5 KV13. 2. 1 Applicable Standards:

JAPAN Yes Including Joints & TerminationsDAINICHI-NIPPON CABLES (MITSUBISHI)

TURKEY-- Yes Including Joints & TerminationsDEMIRER KABLO/SAUDI CABLE CO.

United Arab Emirates-DUBAI Yes Including Joints & TerminationsDUBAI CABLE CO.

EGYPT-- Yes Including Joints & TerminationsELSEWEDY EGYTECH CABLE CO.

JAPAN Yes Including Joints & TerminationsFUJIKURA CABLES

Saudi Arabia-JEDDAH Yes Including Joints & TerminationsJEDDAH CABLE CO.

JAPAN Yes Including Joints & TerminationsJ-POWER SYSTEM CORP.


HUNGARY Yes Including Joints & TerminationsMKM

MUSCAT-- Yes Ref# is 08-02531/01-0303230 dated 08/11/2008no accessories are pre-qualified




JAPAN Yes Including Joints & TerminationsSHOWA CABLE


14Total =

LPE CABLES 69 KV313 .

XLPE CABLES 69 KV13. 3. 1 11-TMSS-01Applicable Standards:

FRANCE Yes Including Joints & TerminationsALCATEL



Page 38 of 101



ManufacturersBy SEC

REMARKS

FINLAND Y I l di J i t & T i tiDRAKA NK


39/101

FINLAND Yes Including Joints & TerminationsDRAKA NK

EGYPT-- Yes TO CARRY OUT ALL TYPE/DESIGN AND ROUTINE/SAMPLETESTS AT SEC APPROVED INDEPENDENT LABORATORY INPRESENCE OF A REPRESENTATIVE OF 3RD PARTY INSPECTIONAGENCY & THREE ENGINEERS OF SEC FOR FIRST CONTRACT;

10 YEARS OF EXTENDED GUARANTEE/WARRANTY; FOR JOINTS& TERMINATIONS ALSO;

ELSEWEDY EGYTECH CABLE CO.

JAPAN Yes Including Joints & TerminationsFUJIKURA CABLES

JAPAN Yes Including Joints & TerminationsFURUKAWA ELECTRIC CO. LTD.

Saudi Arabia-JEDDAH Yes Based on TS&SD letter # 10-02784-01-03032301 dated24/10/2010, it is pre-qualified for 69kV, 1x630mm XLPE PowerCable as confirming to SEC specification # 11-TMSS-01, Rev.0,

with the following condition:

Ten (10) years extended warranty for the proposed 69kV,1x630mm XLPE Power Cable from the date of PAC o f the

turnkey project in case of contract award or date of delivery incase of direct material supply order. This was confirmed inwriting by Jeddah Cable Co. through letter #Nil dated 26th June

2006.

JEDDAH CABLE CO.


HUNGARY Yes Including Joints & TerminationsMKM

NORWAY Yes Including Joints & TerminationsNEXANS NORWAY AS

GERMANY-BERLIN Yes Including Joints & TerminationsPIRELLI KABEL AND SYSTEM GMBH



GERMANY-GERMANY Yes PREVIOUSLY ABB. Including Joints & TerminationsSUDKABEL

15Total =

110KV TO 132 KV413 .

XLPE CABLES 110 TO 132 KV13. 4. 1 11-TMSS-02Applicable Standards:

SWITZERLAND Yes Including Joints & TerminationsBRUGG



FINLAND Yes Including Joints & TerminationsDRAKA NK

Page 39 of 101



ManufacturersBy SEC

REMARKS

EGYPT Yes TO CARRY OUT ALL TYPE/DESIGN AND ROUTINE/SAMPLEELSEWEDY EGYTECH CABLE CO


40/101

EGYPT-- Yes TO CARRY OUT ALL TYPE/DESIGN AND ROUTINE/SAMPLETESTS AT SEC APPROVED INDEPENDENT LABORATORY INPRESENCE OF A REPRESENTATIVE OF 3RD PARTY INSPECTION

AGENCY & THREE ENGINEERS OF SEC FOR FIRST CONTRACT;10 YEARS OF EXTENDED GUARANTEE/WARRANTY; FOR JOINTS& TERMINATIONS ALSO;

ELSEWEDY EGYTECH CABLE CO.

JAPAN Yes Including Joints & TerminationsFUJIKURA


Saudi Arabia-JEDDAH Yes Based on TS&SD letter # 10-02784-01-03032301 dated

24/10/2010, it is pre-qualified for 132kV, 1x1200mm XLPEPower Cable as confirming to SEC specification # 11-TMSS-02,

Rev.0, with the following condition:

Ten (10) years extended warranty for the proposed 132kV,

1x1200mm XLPE Power Cable from the date of PAC of theturnkey project in case of contract award or date of delivery incase of direct material supply order. This was confirmed inwriting by Jeddah Cable Co. through letter #Nil dated 26th June

2006.

JEDDAH CABLE CO.




GERMANY-BERLIN Yes Including Joints & TerminationsPIRELLI KABEL AND SYSTEM GMBHSaudi Arabia-RIYADH Yes Including Joints & TerminationsRIYADH CABLES


GERMANY-GERMANY Yes PREVIOUSLY ABB. Including Joints & TerminationsSUDKABEL


16Total =

230 K V513 .

XLPE CABLE 230 K V13. 5. 1 11-TMSS-02Applicable Standards:

SWITZERLAND Yes Including Joints & Terminations; COMPLETE TYPE, SPECIAL & ROUTINE TESTS FOR THE FIRST ORDER , ALSO 10 YEARS

WARRANTY FROM THE DATE OF PAC ARE REQUIRED

BRUGG



JAPAN Yes Including Joints & TerminationsFUJIKURA


Page 40 of 101



ManufacturersBy SEC

REMARKS

JAPAN Yes Including Joints & TerminationsJ-POWER SYSTEM CORP


41/101


KOREA, Republic of Yes PREVIOUSLY LG; Including Joints & Terminations. Ten (10) years extended warranty from the date of PAC of theFirst turnkey project in case of contract award or date o f the

First delivery in case of direct material supply order.

LS


GERMANY-BERLIN Yes Including Joints & TerminationsPIRELLI KABEL AND SYSTEM GMBH

Saudi Arabia-JEDDAH Yes based on TS&SD letter# 09-01366-03032301 da

Documents

Attachment 4 - Approved Manufacturers List