Upload
trinhhanh
View
219
Download
5
Embed Size (px)
Citation preview
COMMERCIAL
www.braycommercialdivision.com1
Bray Controls Commercial Division13788 West Road, Suite 200AHouston, Texas [email protected]: 1-888-412-2729Fax: 1-888-412-2720
COMMERCIAL
www.braycommercialdivision.comFN-Series – Submittal/Technical Data1/08/16
FN Series Actuators - For use on ATT PIC Valves Specifications
ATT Actuators FN.0.2 FN.0.4 FN.1.2
Supply voltage 24V AC/DC ±10%, 50/60 Hz
Motor Bi-directional synchronous
(2-position / 3-point floating)
Power consumption
Input Impedance
3VA 3VA 3VA, 5VA peaks
Control signalAnalog 0(2)-10V DC
DigitalAnalog 0(2)-10V DC
Position output 0(2)-10V DC - 0(2)-10V DC
Failsafe function No No Yes
>30kΩ - >30kΩ
Auto stroke Yes No Yes
Operation time 50 Hz: 90 seconds 50 Hz: 90 Seconds 50 Hz: 45 Seconds
Actuation force 50 lbf, 225N ±5% 50 lbf, 225N ±5% 50 lbf, 225N ±5%
Ambient temperature -0.4°F to +122°F
Humidity rating <95% Non Condensing
Protection IP54, class II
Cable 4 wires 22 AWG halogenfree cable, 3.2 feet
3 wires 22 AWG halogenfree cable, 3.2 feet
4 wires 22 AWG halogenfree cable, 3.2 feet
Weight 0.55 lbs 0.55 lbs 0.66 lbs
FN.0.2 & FN.0.4 Series FN.1.2 Series
Auto Stroke OptionWith the auto stroke option activated, the actuator will make one full cycle every 24 hours, if the actuator constantly has been in fully open or fully closed position during the previous 24 hours.
This operation will clear up any possible impurities accumulated in the valve, and re-calculate the end positions.
COMMERCIAL
www.braycommercialdivision.com2
Valve model: C, DShown with
FN.0.4, FN.0.2 Actuator
B
A E
Note * Add end connection length to body length.Note ** Weight does not include end connections or actuator.Note *** For valve body.
ModelNumber
ValveModel
ValveSize
CartridgeSize
BodyTappings
A BFC
(FN.0.4 & FN.0.2)
D(FN.1.2)
End connections E** ***Weight
(lbs.)Cv
(GPM)NPTfemale
NPTmale Sweat
ATT-B-050-X-X/Act.ATT-B-075-X-X/Act.
ATT-B-100-X-X/Act.
ATT-B-100-X-X/Act.ATT-B-125-X-X/Act.
ATT-C-050-X-X/Act.
ATT-C-075-X-X/Act.
ATT-C-100-X-X/Act.
ATT-D-100-X-X/Act.
ATT-D-125-X-X/Act.
ATT-D-150-X-X/Act.
B
1/2”
1/4”
1/4”
1/4”
3.23
1.22 5.12 5.71 N/A N/A N/A
1.2
3.03/4” 3.70 1.31”
BSP Only 4.02 1.4
1” H(1-1/2”
dia.)5.04 1.85 6.02 6.50 N/A N/A N/A
4.114.5
1 1/4” 3.7
C
1/2”
L & M (3/4”dia.)
H(1-1/2”
dia.)
L & M (3/4”dia.)
4.80 1.30 5.12 5.71
0.87 0.99 0.791.9 3.03/4” 0.87 0.99 0.79
1” N/A 1.54 0.87
D
1”
6.61 1.62 6.02 6.50
1.38 1.57 1.34
4.7 14.51 1/4” 1.38 1.57 1.461 1/2”
ValveWidth
1.33”1.33”2.33”
BSP Only
2.33”
2.33”
1.84”1.84”1.84”
2.64”
2.64”
2.64”
ActuatorWidth
2.03”
2.03”2.03”
BSP Only
2.03”
2.03”
2.03”
2.03”
2.03”
2.03”
2.03”
2.03” 1.57 1.65 N/A
Valve model: C, DShown with
FN.1.2 Actuator
B
A E
Valve model: BShown with
FN.0.4, FN.0.2 Actuator
C, D† C, D† C, D†FFF
B
A
ATT - Valve/Actuator Dimensions
ATT - Strainer Dimensions
Dimensions may vary, depending on the actuator. Dimensions are shown for the largest spring return actuator currently available.Dimensions are shown in inches and are approximate.
A
C
B
1/2” 3.9 1.1 2.33/4” 3.9 1.1 2.31”
2”
5.3 1.3 2.6
7.7 1.9 3.71 1/4”
7.5 1.9 3.71 1/2”
152025
32
40
50 9.5 1.6 4.3
A B CConnection
in. mm