ATS Steel Deck

BUILD BETTER WITH ATS

E��icient & Durable Metal FormworkExcellent Spanning & High Tensile Strength

Made From Australia Steel

Section Proper y

BMTPanel Cross

Sectional Area A (mm2)

Metre Cross Sectional

Area A (mm2/m)

Panel Second Moment of Area

Ixx(x106mm4)

Metre Second Moment of Area Ixx(x106mm4/m)

Yield Strength fy(MPa)

0.6 275 918 0.107 0.327 550

0.75 344 1147 0.134 0.446 550

0.9 413 1377 0.160 0.532 550

1 459 1530 0.177 0.590 550

ATS Steel Decking is an e fective, durable and permanent metal formwork product providing fast and e icient applicationof suspended concrete slabs. ATS Steel Decking o fers excellent spanning capabilities, high composite strength andminimal de lection.

Zinc-coated high-tensile steel sets a new standard for structural steel decking in the building industry. Developed by ATSBuilding Products speci ically for the steel decking market, delivers excellent durability. It is ideal for both concrete and steelframe construction.

ATS300 Steel Decking is cold formed section manufactured from Australian Steel, hot-dip zinc coated and hi-tensile steelstrip in a range of base metal thicknesses (BMT). Rolled from a G550 (550 MPa Yield Stress) steel for high strength andgood bonding with concrete and reduce steel reinforcement usage. Base metal thickness (BMT) of 0.60mm, 0.75mm,0.9mm & 1.0mm . The coating class Z350 (350g/m2) in accordance with AS1397, provides good resistance against corrosion.

WWW.ATSBP.COM

157 Briens Road Nor�hmead NSW 2152 1800 557 551

4B/400 Moorebank Avenue Moorebank NSW 21271800 557 551

17-23 Long�ield Street Lansvale NSW 2166 (02) 9630 5622

3/153 Rossmanns Road Stapylton QLD 4207 (07) 3667 8217

4/372 Lower Dandenong Road Braeside VIC 3195(03) 9034 3994

ATS Steel Decking

Contact us today: sales@atsbp.com.au

ATS Steel Deck Formwork Span Table

L / 240 Over Single Slab Span

Slab Depth

D (mm)

0.6 BMT No. of props per span

0.75 BMT No. of props per span

0.9 BMT No. of props per span

1 BMT No. of props per span

0 1 2 0 1 2 0 1 2 0 1 2

100 1950 4900 6950 2150 5400 7700 2250 5700 8150 2350 5900 8400

110 1900 4750 6800 2100 5250 7500 2200 5550 7900 2250 5750 8150

120 1850 4650 6650 2050 5150 7300 2150 5450 7700 2200 5600 7950

130 1800 4550 6450 2000 5000 7150 2100 5300 7550 2150 5500 7800

140 1750 4450 6300 1950 4900 6950 2050 5200 7400 2100 5350 7650

150 1700 4350 6200 1900 4800 6850 2000 5100 7250 2050 5250 7450

160 1700 4250 6050 1850 4700 6700 1950 5000 7100 2050 5150 7350

170 1650 4200 5950 1800 4650 6600 1950 4900 6950 2000 5050 7200

180 1600 4100 5850 1800 4550 6450 1900 4800 6850 1950 5000 7050

190 1600 4050 5750 1750 4450 6350 1850 4750 6750 1950 4900 6950

200 1550 4000 5650 1750 4400 6250 1850 4650 6650 1900 4800 6850

210 1550 3900 5550 1700 4350 6150 1800 4600 6500 1850 4750 6750

220 1500 3850 5500 1700 4250 6050 1800 4550 6450 1850 4700 6650

230 1500 3800 5400 1650 4200 6000 1750 4450 6350 1800 4600 6550

240 1450 3750 5350 1650 4150 5900 1750 4400 6250 1800 4550 6450

250 1450 3700 5250 1600 4100 5850 1700 4350 6200 1750 4500 6400

> Concrete Density = 2550 kg/m3.> De lection Limit = 1/240.> Construction Load during stage I and Stage II = 1.0 kPa.> The ratio of longer to shor er span length must not exceed 1.2.> Allowance for ponding has been made.> Concentrated ver ical live load is not considered.> The spans shown in these tables are the maximum allowable formwork spans between permanent suppor s. > Composite slab designs are not included in this table.> This span table shall be used in conjunction with engineering design.

L / 240 Over 2 Slab Spans

L / 240 Over 3 or More Slab Spans

Slab Depth

D (mm)

0.6 BMT No. of props per span

0.75 BMT No. of props per span

0.9 BMT No. of props per span

1 BMT No. of props per span

0 1 2 0 1 2 0 1 2 0 1 2

100 2450 4700 7100 2700 5200 7800 2850 5500 8250 2950 5700 8550

110 2350 4600 6900 2600 5050 7600 2750 5350 8050 2850 5550 8300

120 2300 4450 6700 2550 4950 7400 2700 5200 7850 2800 5400 8100

130 2250 4350 6550 2500 4800 7250 2650 5100 7650 2750 5250 7900

140 2200 4250 6400 2450 4700 7100 2600 5000 7500 2650 5150 7750

150 2150 4200 6300 2400 4600 6950 2550 4900 7350 2600 5050 7600

160 2100 4100 6150 2350 4550 6800 2500 4800 7200 2550 4950 7450

170 2100 4000 6050 2300 4450 6700 2450 4700 7050 2500 4850 7300

180 2050 3950 5950 2250 4350 6550 2400 4650 6950 2500 4800 7200

190 2000 3900 5850 2200 4300 6450 2350 4550 6850 2450 4700 7050

200 2000 3800 5750 2200 4250 6350 2300 4500 6750 2400 4650 6950

210 1950 3750 5650 2150 4150 6250 2300 4400 6650 2350 4550 6850

220 1900 3700 5600 2100 4100 6150 2250 4350 6550 2350 4500 6750

230 1900 3650 5500 2100 4050 6100 2200 4300 6450 2300 4450 6650

240 1850 3600 5400 2050 4000 6000 2200 4250 6350 2250 4400 6600

250 1850 3550 5350 2050 3950 5950 2150 4200 6300 2250 4300 6500

Slab Depth

D (mm)

0.6 BMT No. of props per span

0.75 BMT No. of props per span

0.9 BMT No. of props per span

1 BMT No. of props per span

0 1 2 0 1 2 0 1 2 0 1 2

100 2300 4700 7100 2550 5200 7800 2700 5500 8250 2800 5700 8550

110 2250 4600 6900 2500 5050 7600 2600 5350 8050 2700 5550 8300

120 2200 4450 6700 2400 4950 7400 2550 5200 7850 2650 5400 8100

130 2150 4350 6550 2350 4800 7250 2500 5100 7650 2600 5250 7900

140 2100 4250 6400 2300 4700 7100 2450 5000 7500 2550 5150 7750

150 2050 4200 6300 2250 4600 6950 2400 4900 7350 2450 5050 7600

160 2000 4100 6150 2200 4550 6800 2350 4800 7200 2450 4950 7450

170 1950 4000 6050 2200 4450 6700 2300 4700 7050 2400 4850 7300

180 1950 3950 5950 2150 4350 6550 2250 4650 6950 2350 4800 7200

190 1900 3900 5850 2100 4300 6450 2250 4550 6850 2300 4700 7050

200 1850 3800 5750 2050 4250 6350 2200 4500 6750 2250 4650 6950

210 1850 3750 5650 2050 4150 6250 2150 4400 6650 2250 4550 6850

220 1800 3700 5600 2000 4100 6150 2150 4350 6550 2200 4500 6750

230 1800 3650 5500 2000 4050 6100 2100 4300 6450 2150 4450 6650

240 1750 3600 5400 1950 4000 6000 2050 4250 6350 2150 4400 6600

250 1750 3550 5350 1950 3950 5950 2050 4200 6300 2100 4300 6500

ATS Steel Decking Proper ies & Advantages

Temporary propping shall be provided according to ATS Steel Deck formwork span table or instructions from a quali ied structural engineer to avoid excessive de lection and prevent failure of formwork.

A minimum bearing width of 50mm for edge suppor s and 100mm for intermediate suppor s and temporary props must be provided unless approved by a quali ied structural engineer.

All propping must be continuous across the width of ATS Steel Deck formwork.The design, documentation, erection and removal of propping must comply with AS3610.

300mm Strip Width > Easy transpor & handling > Less o f-cuts and waste

Interlocking Ribs > Quick installation > Reduced de lection

Rolled Formed from G550 Steel > High tensile strength and good bonding with concrete > Reduced steel reinforcement usage

Flat So it Finish > Visually pleasing > Easy to clean and paint > Easy bolting to So it

Permanent Formwork > Minimal propping > No stripping of formwork required

Local Production & Distribution > Suppor ing local industry > Local design suppor and customer service

Propping

Proper y Advantages

Sheet Placement

FasteningThe sheets shall be ixed to provide resistance against upli forces and lateral movement.

Appropriate ixing methods may be chosen from: welds, nails or screws. Headed studs welded through sheets to structural steel in composite beam design are also considered to have adequate resistance against upli .

However, some temporary ixing shall be provided to hold down the deck prior to stud welding. Fixing of the sheets should be provided adjacent to every rib over each suppor .

Edge Form

Edge forms are lipless C-sections rolled from light gauge steel.

It can be easily trimmed, bent, spliced and fastened to achieve the ideal edge inish. The bottom lange of the C-section can be fastened to structural steel or the underside of ATS Steel Deck sheeting. The top lange shall be braced using steel straps at maximum of 600mm centres

The edge ribs of ATS Steel Deck sheets aredesigned to be interlocked. It is recommended toposition a new sheet at an angle to a laid sheet, thenslowly rotating it till the ribs are locked in place.

WWW.ATSBP.COM

157 Briens RoadNorthmead NSW 21521800 557 551

4B/400 Moorebank AvenueMoorebank NSW 21271800 557 551

17-23 Longfield StreetLansvale NSW 2166(02) 9630 5622

3/153 Rossmanns RoadStapylton QLD 4207(07) 3667 8217

4/372 Lower Dandenong RoadBraeside VIC 3195(03) 9034 3994

Proud Member

Our mission statement is at the core of all we do.From sourcing and delivery of the �inest products

top paying special attention to our customer toenable them to complete quality projects on

time and on budget.

BUILD BETTER WITH ATS

Proudly printed usingrecycled paper stock

Contact us today: sales@atsbp.com.au