Embed Size (px)
DESCRIPTION
Instructions on setting up ASUS router RT-N13U B1 with DDWRT installed with transmission Client.
Citation preview
13/09/13 6:48 PMAsus RT-N13U B1 - DD-wrt thread | TechEnclave - Indian Technology Forum
Page 1 of 27http://www.techenclave.com/community/threads/asus-rt-n13u-b1-dd-wrt-thread.113137/
Page 1 of 71 → 71 Next >
Asus RT-N13U B1 - DD-wrt threadDiscussion in 'Networking' started by dinjo, May 23, 2011.
Just checked that B1 now has dd-wrt support time to get rid of filthy Asus
Software
Router Database | www.dd-wrt.com
Source - Asus RT-N13U - DD-WRT Wiki
So its finally here –
Most of the contents have been taken from DD-WRT Wiki and added/modified
some info to improve the information flow.
Guide to Install DD-WRT on Asus RT-N13U
Reasons why you should opt for DD-WRT over shitty Asus Firmware
Almost all Linux Kernel Fixes done in dd-wrt.
Allows freedom to go about install any apps which linux supports(Most
probably all of them)
Home › Forums › Computer Hardware Zone › Networking ›
1 2 3 4 5 6
Trophy Points: 127
dinjoHell Yeah[Born Critic]
Forums
Search Forums Recent Posts Popular Content
Mobile Finder Trade Buyer's Guide
Members
Log in or Sign up
Search...
13/09/13 6:48 PMAsus RT-N13U B1 - DD-wrt thread | TechEnclave - Indian Technology Forum
Page 2 of 27http://www.techenclave.com/community/threads/asus-rt-n13u-b1-dd-wrt-thread.113137/
Very good for people who intend to use in cybercafes as it allows tighter
control and improved security and proper logging of events
DD-WRT is far superior compared to other open Firmware like Tomato and
Open WRT and DD-WRT community is best in the recent times.
Install Transmission to get all download on your USB without keeping the PC
turned on[Yes it supports full resume downloads never break now]
You should not do this if you dont understand much of it.[SERIOUSLY]
Flashing Process
First and foremost you must take care that you have Asus Original Firmware with
you just in case anything goes wrong while flashing[Dont hold me responsible]
Download latest DD-WRT Firmware Image[This is the custom firmware]
Browse to firmware repository and select/open most current directory, Ex. 12-
24-10-r15962/
Open 'Asus-RTN13U' directory and download 'asus-to-ddwrt.trx'[Choose the
router model appropriately if its B1 then select from 'Asus-RTN13UB1' ]
Recommended is to get 16804.
Download latest version of the Asus Utility[This is just in case of rolling back]
Browse to ASUSTeK Computer Inc. -Support- Drivers and Download
In the three dropdown menus, select 'Wireless', 'AP/Router', 'RT-N13U', and
click 'Search'
13/09/13 6:48 PMAsus RT-N13U B1 - DD-wrt thread | TechEnclave - Indian Technology Forum
Page 3 of 27http://www.techenclave.com/community/threads/asus-rt-n13u-b1-dd-wrt-thread.113137/
Select OS in popup menu
Click '+' next to 'Utilities' and skip down to your version (Also see next step,
download firmware.)
Within that zip file, navigate to the UT4063/Utility folder and run 'setup' to
install.
Be sure there is access to the Firmware Restoration utility
Download safety copy of Asus firmware
Do same as previous step, except click '+' next to 'Firmware' and download
latest version of your model
Note that this file should not be needed; use only to restore Asus FW to
router if later desired.
Last few checks
If not already directly wired, connect Ethernet cable from one of the router's
LAN ports to client PC.
Be sure router's other three LAN ports and WAN port are open (nothing
connected)[Very Very Important]
On PC, disable all other network adapters: wireless, modem, etc.[Another very
important step ignoring it might brick the router]
On PC, disable any firewall (Ex. Windows Firewall)
Optional: Set PC to use a static IP, Ex. 192.168.1.2, netmask 255.255.255.0,
gateway 192.168.1.1[I recommend this to be done]
If possible, use uninterruptable power supply (UPS) for both PC and router. A
power failure while flashing, though not likely, will probably brick the router.
13/09/13 6:48 PMAsus RT-N13U B1 - DD-wrt thread | TechEnclave - Indian Technology Forum
Page 4 of 27http://www.techenclave.com/community/threads/asus-rt-n13u-b1-dd-wrt-thread.113137/
Note: Early on, some had problems using Firefox. Consider using Internet
Explorer or Chrome.
Flash to DD-WRT
Place router in Recovery mode
Disconnect power adapter plug from the RT-N13U
Push and hold the Restore button located on bottom panel[use a pen point to
press the button properly]. While continuing to hold down the Restore
button, plug the power adapter back into router.
After five seconds, LED on front panel starts to blink, release the button.
Upload firmware image
On PC, open Asus' Firmware Restoration utility (installed earlier)
In Firmware Restoration window, click 'Browse' and select the DD-WRT image
file, asus-to-ddwrt.trx (downloaded earlier)
Click 'Upload' to begin flash process that can take up to four minutes. Brick
warning: Do not interrupt!
When message that router is rebooting appears, close Firmware Restoration
utility.
Reboot, launch DD-WRT web interface, and cleanup
After a minute or two, disconnect power adapter plug from the RT-N13U
Wait at least ten seconds, then reconnect to power
If optional step of setting static IP was followed earlier, can reset to automatic
13/09/13 6:48 PMAsus RT-N13U B1 - DD-wrt thread | TechEnclave - Indian Technology Forum
Page 5 of 27http://www.techenclave.com/community/threads/asus-rt-n13u-b1-dd-wrt-thread.113137/
Browse to 192.168.1.1 should bring up the DD-WRT web interface; set
name/password for first access
Configure router as desired. Default connection is DHCP; for DSL check DSL
with DD-WRT.
When satisfied that factory firmware will not be used again, uninstall Asus
Utility from PC and delete Asus files.[I wont recommend removing this]
Configure USB
Once this is done CFW [DD-WRT] is installed on your router now you need to get
other utilities installed.
Firstly need to configure a USB where we would be installing the apps
The software we will install needs to be saved on the usb disk and, while we could
actually save it on the same partition we will use for the data, it is highly
discouraged.
DD-WRT support Ext2, Ext3,FAT32,FAT,NTFS but i have gone with EXT3 since its
gives best performance NTFS seriously hampers down the downloads if you do it
via Transmission if you are not using router for downloads you can use NTFS as
well
For this we will create 2 different partition Ii have Ext3 – 512MB [Acting like a C:]
and a 12GB Ext3 partition acting as D: to store the data.
How to create partition on USB – Get Gparted from here GParted -- Download
There are also tools like Easeus Partition manager and Minti Tool Partion Manager
Burn it as iso and boot pc from CD
13/09/13 6:48 PMAsus RT-N13U B1 - DD-wrt thread | TechEnclave - Indian Technology Forum
Page 6 of 27http://www.techenclave.com/community/threads/asus-rt-n13u-b1-dd-wrt-thread.113137/
Follow the steps shown in the pics to see the procedure
Make sure you select proper drive and NOT Accidentaly your hard drive
13/09/13 6:48 PMAsus RT-N13U B1 - DD-wrt thread | TechEnclave - Indian Technology Forum
Page 7 of 27http://www.techenclave.com/community/threads/asus-rt-n13u-b1-dd-wrt-thread.113137/
13/09/13 6:48 PMAsus RT-N13U B1 - DD-wrt thread | TechEnclave - Indian Technology Forum
Page 8 of 27http://www.techenclave.com/community/threads/asus-rt-n13u-b1-dd-wrt-thread.113137/
Above steps are shown for Ext3 and NTFS but you can always create 2 different
EXT3 Partition.
Once done re-start pc by clicking Exit option.
Just paste the following into the text box in Administration -> Commands and
Partition 1 – Mounted on /opt – From 512Mb to 2Gb (I
normally use 1Gb) – Formatted with EXT3
Partition 2 – Mounted on /mnt – All the remaining space –
Formatted with EXT3
13/09/13 6:48 PMAsus RT-N13U B1 - DD-wrt thread | TechEnclave - Indian Technology Forum
Page 9 of 27http://www.techenclave.com/community/threads/asus-rt-n13u-b1-dd-wrt-thread.113137/
click Save Startup
[NOTE: configuration of filesystem support and partitions can be easy set at
first line, NTFS needs aditional driver, that can be installed after you pass
Optware guide by ipkg install ntfs-3g]
Read comments beside the line to understand what it does
Code:
mkdir&/tmp/etc/config&#Create&a&dir&/tmp/etc/configecho&"wget&http://home.karneval.cz/10102207/fs.gz&@P&/tmp/root"&>>&/tmp/etc/config/fs.wanup&#Get&the&tar&file&which&has&fs&drivers&and&store&in&/tmp/rootecho&"tar&@xvzf&/tmp/root/fs.gz&@C&/tmp/root"&>>&/tmp/etc/config/fs.wanup&#Build&a&shell&script&by&appending&to&output&using&>>&,&command&to&extract&the&tar&file.echo&"sh&/tmp/root/ext3"&>>&/tmp/etc/config/fs.wanup&#Add&ext3&to&run&itecho&"mount&@o&rw&@t&ext3&/dev/discs/disc0/part1&/opt"&>>&/tmp/etc/config/fs.wanup&#Add&mount&to&1st&partitionecho&"mount&@o&rw&@t&ext3&/dev/discs/disc0/part2&/mnt"&>>&/tmp/etc/config/fs.wanup&#Add&mount&to&2nd&partitionecho&"rm&/tmp/root/*.ko&/tmp/root/fs.gz&/tmp/root/ext3"&>>&/tmp/etc/config/fs.wanup&#Clean&up&the&traceschmod&+x&/tmp/etc/config/fs.wanup&#&Provide&Exec&permissions&and&run&the&above&commandsecho&"nobody:*:65000:65000:nobody:/mnt:/bin/false"&>>&/etc/passwd&#&Add&nobody&for&samba&sharesleep&60&#&Wait&for&1&minute
echo&1&>&/sys/class/scsi_disk/0:0:0:0/allow_restart&#&To&avoid&HDD&spindown
wget&[URL]http://www.3iii.dk/linux/optware/settings.json[/URL]&@O&/mnt/data/torrents/.config/transmission@daemon/settings.json&#&Get&the&settings.json&from&internet&just&in&case&local&file&gets&corrupted&can&you&remove&this&if&u&dont&want
/opt/bin/transmission@daemon&@g&/mnt/data/torrents/.config/transmission@daemon&#Start&Transmission&@&Can&remove&this&if&you&keep&S99trans&file&keep&either&of&them.
Enable the following under Services -> USB
Core USB Support
USB 2.0 Support
USB Storage Support
Automatic Drive Mount
Reboot router with an ext3 formatted USB drive plugged in
If the drive was successfully mounted (which may take some time), try another
filesystems by editing 1st line of script.
[NOTE: check mounts thru putty by df -h because in dd-wrt gui is is shown only
13/09/13 6:48 PMAsus RT-N13U B1 - DD-wrt thread | TechEnclave - Indian Technology Forum
Page 10 of 27http://www.techenclave.com/community/threads/asus-rt-n13u-b1-dd-wrt-thread.113137/
after repluging drive]
You might see something like this.
If you dont see /opt as mounted default go to Services->USB and change the
mount to /opt Save and Apply Settings and then re-boot the router again Admin-
>Management go bottom Re-boot router
Installing Optware
Now we will be installing Optware which helps installing every other apps.
Before that get Putty
Telnet to 192.168.1.1 with root username and password which you had set and
run mount command to see whether the drives have mounted correctly or not
your drives have to be mounted correctlty to get move ahead
Code:
13/09/13 6:48 PMAsus RT-N13U B1 - DD-wrt thread | TechEnclave - Indian Technology Forum
Page 11 of 27http://www.techenclave.com/community/threads/asus-rt-n13u-b1-dd-wrt-thread.113137/
root@DD@WRT:/tmp#&mount
rootfs&on&/&type&rootfs&(rw)
/dev/root&on&/&type&squashfs&(ro)
none&on&/dev&type&devfs&(rw)
proc&on&/proc&type&proc&(rw)
sysfs&on&/sys&type&sysfs&(rw)
ramfs&on&/tmp&type&ramfs&(rw)
devpts&on&/dev/pts&type&devpts&(rw)
devpts&on&/proc/bus/usb&type&usbfs&(rw)
/dev/discs/disc0/part1&on&/opt&type&ext3&(rw,noatime,nodiratime,data=ordered)
/dev/discs/disc0/part2&on&/mnt&type&ext3&(rw,noatime,nodiratime,data=ordered)
root@DD@WRT:/tmp#
Host Name: 192.168.1.1
13/09/13 6:48 PMAsus RT-N13U B1 - DD-wrt thread | TechEnclave - Indian Technology Forum
Page 12 of 27http://www.techenclave.com/community/threads/asus-rt-n13u-b1-dd-wrt-thread.113137/
Connection type: Telnet
Installing Optware (only to an ext3 partition; /opt MUST be empty)
Code:
wget&[URL]http://home.karneval.cz/10102207/[email protected][/URL]&@O&@&|&tr&@d&'\r'&>&/tmp/[email protected]
sh&/tmp/[email protected];&ipkg&update;&ipkg&upgrade
wget&[URL]http://home.karneval.cz/10102207/sort[/URL]&@P&/opt/bin;&chmod&+x&/opt/bin/sort
[NOTE: gateway is hard set to 192.168.1.1, if u have problem with this replace in
optware-install.sh by vi or sed]
Now you can install another Optware packabe from Tutorials - DD-WRT Wiki or if
u like:
Recommend change to ipkg to track the download status while install pkg unhash
the verbose-wget line
Code:
root@DD@WRT:/opt/etc#&more&ipkg.conf
#Uncomment&the&following&line&for&native&packages&feed&(if&any)
#src/gz&native&[URL]http://[email protected]/feeds/optware/ddwrt/native/stable[/URL]
src/gz&optware&[URL]http://[email protected]/feeds/optware/ddwrt/cross/stable[/URL]
dest&/opt/&/
option&verbose@wget&&&&&&&&&&&&&&&##################This&line&will&have&a&#&prefix&to&it&,&remove&it
Install xinetd, vsftpd, samba, webserver, pxe boot server, wget, nano, htop, dlq
rapget
[I havent installed nano since i dont needed it vi does the job for me ;-) and dont
install samba 3.5 samba 2 provide best transfer speeds]
13/09/13 6:48 PMAsus RT-N13U B1 - DD-wrt thread | TechEnclave - Indian Technology Forum
Page 13 of 27http://www.techenclave.com/community/threads/asus-rt-n13u-b1-dd-wrt-thread.113137/
Code:
ipkg&install&xinetd&htop&nano&samba2&vsftpd&tftp@hpa&wget;&killall&xinetd&smbd&nmbd
rm&/opt/etc/samba/smb.conf&/opt/etc/vsftpd.conf&/opt/etc/init.d/S80samba&&/opt/etc/xinetd.d/tftp
wget&[URL]http://home.karneval.cz/10102207/opt.gz[/URL]&@P&/opt;&tar&@xvzf&/opt/opt.gz&@C&/opt
sh&/opt/etc/init.d/S10httpd;&sh&/opt/etc/init.d/S10xinetd;&rm&/opt/opt.gz
Well done, RT-N13u is ready for basic usage, u can acces by
samba: \\192.168.1.1
rem to add as hardrive in W7/XP run in command line
net use a: \\192.168.1.1\www
net use b: \\192.168.1.1\dlq
web: http://192.168.1.1:8080
ftp: ftp://192.168.1.1
Open to the world (paste to Administrations -> Commands and Save Firewall)
WebRepcurrentVotenoRatingnoWeight
13/09/13 6:48 PMAsus RT-N13U B1 - DD-wrt thread | TechEnclave - Indian Technology Forum
Page 14 of 27http://www.techenclave.com/community/threads/asus-rt-n13u-b1-dd-wrt-thread.113137/
Code:
iptables&@t&nat&@I&PREROUTING&@p&tcp&@d&$(nvram&get&wan_ipaddr)&@@dport&80&@j&DNAT&@@to&192.168.1.1:8080
iptables&@t&nat&@I&PREROUTING&@p&tcp&@d&$(nvram&get&wan_ipaddr)&@@dport&22&@j&DNAT&@@to&192.168.1.1:22
iptables&@t&nat&@I&PREROUTING&@p&tcp&@d&$(nvram&get&wan_ipaddr)&@@dport&21&@j&DNAT&@@to&192.168.1.1:21
iptables&@I&INPUT&@p&tcp&@d&192.168.1.1&@@dport&8080&@j&logaccept
iptables&@I&INPUT&@p&tcp&@d&192.168.1.1&@@dport&22&@j&logaccept
iptables&@I&INPUT&@p&tcp&@d&192.168.1.1&@@dport&21&@j&logaccept
Now the reason why i bought this router
Installing a Transmission-daemon
Make the following folders
Code:
cd&/mnt
mkdir&@p&/mnt/data/torrents&&&&&&&&&&&&&&#&@p&to&make&both&directories&at&the&same&time
The plan is to have everything torrent go to the folder /mnt/data/torrents.So
torrent data would be under Partition 2
Installing Transmission
Code:
/opt/bin/ipkg@opt&@verbose_wget&install&transmission
Started and stopped Transmission to get the basic work folders
Code:
13/09/13 6:48 PMAsus RT-N13U B1 - DD-wrt thread | TechEnclave - Indian Technology Forum
Page 15 of 27http://www.techenclave.com/community/threads/asus-rt-n13u-b1-dd-wrt-thread.113137/
/opt/bin/transmission@daemon&@g&/mnt/data/torrents/.config/transmission@daemon
killall&transmission@daemon
With the command above you get the basic folder structure of:
Code:
/mnt/data/torrents/.config/
/mnt/data/torrents/.config/transmission@daemon
/mnt/data/torrents/.config/transmission@daemon/settings.json&&#file
/mnt/data/torrents/.config/transmission@daemon/stats.json&&&&&&&#file
/mnt/data/torrents/.config/transmission@daemon/blocklists
/mnt/data/torrents/.config/transmission@daemon/resume&&&&&&&&&&
/mnt/data/torrents/.config/transmission@daemon/torrents
Edit settings.json to contain the following
Code:
13/09/13 6:48 PMAsus RT-N13U B1 - DD-wrt thread | TechEnclave - Indian Technology Forum
Page 16 of 27http://www.techenclave.com/community/threads/asus-rt-n13u-b1-dd-wrt-thread.113137/
&&&&&"encryption":&2,
&&&&&"lpd@enabled":&false,
&&&&&"max@peers@global":&35,
&&&&&"peer@port":&25000,
&&&&&"pex@enabled":&1,
&&&&&"port@forwarding@enabled":&1,
&&&&&"rpc@authentication@required":&0,
&&&&&"rpc@password":&"",
&&&&&"rpc@port":&9091,
&&&&&"rpc@username":&"",
&&&&&"rpc@whitelist":&"192.168.1.*",
&&&&&"umask":&0,
&&&&&"upload@limit":&200,
&&&&&"upload@limit@enabled":&1,
&&&&&"utp@enabled":&true
&&&&&}
The file settings.json can also be downloaded from here (the wget command
is one line):
Code:
wget&[URL]http://www.3iii.dk/linux/optware/settings.json[/URL]&@O&/mnt/data/torrents/.config/transmission@daemon/settings.json
Open the port
Code:
/usr/sbin/iptables&@I&INPUT&1&@p&tcp&@@dport&25000&@j&logaccept
Run again
13/09/13 6:48 PMAsus RT-N13U B1 - DD-wrt thread | TechEnclave - Indian Technology Forum
Page 17 of 27http://www.techenclave.com/community/threads/asus-rt-n13u-b1-dd-wrt-thread.113137/
Code:
/opt/bin/transmission@daemon&@g&/mnt/data/torrents/.config/transmission@daemon
Accessing Transmission web interface
Now you get web access to the Transmission page by going to
http://192.168.1.1:9091. That is, if your routers IP is 192.168.1.1
The downloaded file will turn up in the /mnt/data/torrents folder.
The full space of the file will be reserved from the start, so in a FTP, WinSCP or
Explorer via Samba it may seem like the file is all there immediately, but it is
not! It is fully downloaded when the line turns green in the Transmission web
interface at 192.168.1.1:9091.
You can see details about any of the torrent files by clicking the Inspector
button on the right in the Transmission web interface.
I personally prefer Transmission Remote GUI, nice uTorrent kind of interface
just enter IP as 192.168.1.1 and port as 9091[Or whatever you have confired]
http://code.google.c...son-remote-gui/
Wanna Share the Data of the Mounted Drive via Wi-Fi run the below
command
Code:
How to get transmission to download torrent files?
- In a web browser go to your favourite torrent site/tracker
and download a "<myfile>.torrent" file
- In a web browser go to 192.168.1.1:9091 to enter theClick to expand...
13/09/13 6:48 PMAsus RT-N13U B1 - DD-wrt thread | TechEnclave - Indian Technology Forum
Page 18 of 27http://www.techenclave.com/community/threads/asus-rt-n13u-b1-dd-wrt-thread.113137/
ln&@s&/mnt/data&/opt/share/www/data
Change the smb.conf file to /mnt/data
Or just simply change the samba file.
Code:
&&netbios&name&=&dd@wrt
&&interfaces&=&192.168.1.1/255.255.255.0
&&security&=&share
&&encrypt&passwords&=&yes
&&smb&passwd&file&=&/opt/etc/samba/smbpasswd
&&null&passwords&=&Yes
&&client&code&page&=&850
&&character&set&=&ISO8859@1
&&socket&options&=&TCP_NODELAY&SO_RCVBUF=8192&SO_SNDBUF=8192
&&log&file&=&/opt/var/samba/log.*
&&max&log&size&=&100
&&load&printers&=&No
&&dns&proxy&=&No
&&hosts&allow&=&192.168.&&127.
&&remote&announce&=&192.168.1.255
[www]
&&[B]path&=&/mnt/data[/B]&#######This&is&where&you&change
&&read&only&=&no
&&guest&ok&=&yes
[dlq]
&&path&=&/opt/share/dlq
&&read&only&=&no
&&guest&ok&=&yes
Having problems mounting the drive
Read the guide again , you have definitely missed something, most people do
the incorrect partitioning causing all the trouble and do not add the startup
script.
If still not provide the output of following commands in the thread
13/09/13 6:48 PMAsus RT-N13U B1 - DD-wrt thread | TechEnclave - Indian Technology Forum
Page 19 of 27http://www.techenclave.com/community/threads/asus-rt-n13u-b1-dd-wrt-thread.113137/
Code:
dmesg
lsmod
cd&/dev/discs/disc0;ls&@lrt
mount
To recognize ext3 partition in Windows get Ext2FSD install and run the
service then you can read write on Ext3 partition too on windows.
Ext2Fsd Project
Hard disk spin down issue fix [recommended for Portable HDD]
Code:
echo&1&>&/sys/class/scsi_disk/0:0:0:0/allow_restart
USB Getting unmounted / readonly with below error in dmesg
Run this
Code:
echo&128&>&/sys/block/sda/device/max_sectors
Add this to your startup
How many torrents can it handle ?
<3>scsi 0:0:0:0: rejecting I/O to dead device
13/09/13 6:48 PMAsus RT-N13U B1 - DD-wrt thread | TechEnclave - Indian Technology Forum
Page 20 of 27http://www.techenclave.com/community/threads/asus-rt-n13u-b1-dd-wrt-thread.113137/
dinjo, May 23, 2011 #1
Argus, baccilus, d6bmg and 9 others like this.
If you cant get the drive mounted make sure you had the startup script set up
correctly and partitions are created in correct order and if you are on ADSL
make sure the modem is connected to internet.
Reverting to Asus Firmware
Code:
First:&download&the&right&firmware&from&the&ASUS&website&([URL]http://support.asus.com/download/download.aspx?SLanguage=en@us[/URL])
Second:&Setup&your&computer&as&you&did&to&flash&to&DD@WRT&(static&IP&address,&disable&other&networking&adapters,&and&use&a&wired&LAN&connection,&disable&your&firewall).
Third:&Install&and&open&the&Asus&Firmware&Restoration&utility&in&windows.&Once&this&is&all&ready&to&go,&unplug&the&router.&Wait&a&few&seconds,&then&hold&the&restore&button&on&the&underside&of&the&router.&While&holding&the&restore&button&plug&the&router&back&in&and&keep&holding&the&button&until&the&power&light&flashes&slowly.&It&will&then&be&in&recovery&mode&waiting&for&the&utility&to&upload&the&firmware.
Fourth:&With&the&router&in&recovery&mode,&select&the&downloaded&firmware&with&the&Firmware&Restoration&utility.&Then&click&the&button&to&start&the&upload.&The&utility&will&guide&you&from&there.
Once&done&Reset&all&of&the&settings&to&default&and&started&from&scratch.
P.S - I have sold my device so i wont able to help much as if now
13/09/13 6:48 PMAsus RT-N13U B1 - DD-wrt thread | TechEnclave - Indian Technology Forum
Page 21 of 27http://www.techenclave.com/community/threads/asus-rt-n13u-b1-dd-wrt-thread.113137/
arun687, May 23, 2011 #2
Pat, May 23, 2011 #3
Thanks mate will be looking for documentation to install it and give it a go ASAP.
Did you install it already?
Awesome. Been waiting for this since a long time!
Here it is
WebRepcurrentVotenoRatingnoWeight
WebRepcurrentVotenoRatingnoWeight
Trophy Points: 52
arun687Privileged Users
Online
Trophy Points: 87
PatPrivileged Users
Trophy Points: 127
dinjoHell Yeah[Born Critic]
13/09/13 6:48 PMAsus RT-N13U B1 - DD-wrt thread | TechEnclave - Indian Technology Forum
Page 22 of 27http://www.techenclave.com/community/threads/asus-rt-n13u-b1-dd-wrt-thread.113137/
dinjo, May 23, 2011 #4
Pat, May 23, 2011 #5
dinjo, May 23, 2011 #6
^^I saw your posts over at dd-wrt forums! Will give this a shot soon. Hopefully I
will find some time to actually understand the feature-set that dd-wrt would
bring in!
Can't get USB mounted and optware installed yet once thats done it would
awesome
Trophy Points: 87
PatPrivileged Users
Trophy Points: 127
dinjoHell Yeah[Born Critic]
13/09/13 6:48 PMAsus RT-N13U B1 - DD-wrt thread | TechEnclave - Indian Technology Forum
Page 23 of 27http://www.techenclave.com/community/threads/asus-rt-n13u-b1-dd-wrt-thread.113137/
thatsashok, May 23, 2011 #7
dinjo, May 23, 2011 #8
Praks, May 23, 2011 #9
dinjo, May 24, 2011 #10
did u test 3g modem with it??
I dont have 3G modem
@dinjo
Thanks a lot bro for that special PM.
uh, was thinking of selling this off becoz of dumb download master software.
Total n00b on DDWRT, Could you please tell how to install, What extra do we get
with it ? Will torrents work ?
Please PM URL if you have posted whole method somewhere else.
Same method is to be followed for B1 model too its quite easy to do so but having
a hard tie to enable USB support and installing transmission
Asus RT-N13U - DD-WRT Wiki
Trophy Points: 33
thatsashokPrivileged Users
Trophy Points: 127
dinjoHell Yeah[Born Critic]
Trophy Points: 61
PraksPrivileged Users
dinjo
13/09/13 6:48 PMAsus RT-N13U B1 - DD-wrt thread | TechEnclave - Indian Technology Forum
Page 24 of 27http://www.techenclave.com/community/threads/asus-rt-n13u-b1-dd-wrt-thread.113137/
arun687, May 24, 2011 #11
bobbyprajan, May 24, 2011 #12
Praks, May 24, 2011 #13
1 person likes this.
^ Ok so no HDD support yet? Also, is it possible to go back to the ASUS firmware in
case anyone wants to?
There was reports of successful installation of transmission and downloads to
usb drive. Now waiting to move from WL-520GU to the N13U after you guys get it
working..
@arun687
Yes, You can download firmware from Asus site, Or PM me I can upload for you.
Can try with 4GB / 8GB USB drive, Can anyone confirm reports of successful
installation & working of transmission ?
Seems firmware is still in beta, Will it work ?
Nope its not buggy still i need to get FAT32 and NTFS will take some time since i
need to get time out of my office work, see transmission working ;-)
Trophy Points: 127
Hell Yeah[Born Critic]
Trophy Points: 52
arun687Privileged Users
Online
Trophy Points: 32
bobbyprajanUpgraded User
Trophy Points: 61
PraksPrivileged Users
13/09/13 6:48 PMAsus RT-N13U B1 - DD-wrt thread | TechEnclave - Indian Technology Forum
Page 25 of 27http://www.techenclave.com/community/threads/asus-rt-n13u-b1-dd-wrt-thread.113137/
dinjo, May 24, 2011 #14
arun687, May 24, 2011 #15
dinjo, May 25, 2011 #16
--- Updated Post - Automerged ---
**** Default Transmission Installed Transmission Remote GUI exact replica of
utorrent gives all the options which utorrent enjoying now
^ Did you manage to mount USB as well?
Yep , NTFS support coming today ....
BTW - It supports full resume and selection of files from torrent files.
@dinjo
What happens when net disconnects / power goes off for sometime & comes
back. Will torrents on this transmission will start automatically or needs to restart
them manually.
Trophy Points: 127
dinjoHell Yeah[Born Critic]
Trophy Points: 52
arun687Privileged Users
Online
Trophy Points: 127
dinjoHell Yeah[Born Critic]
PraksPrivileged Users
13/09/13 6:48 PMAsus RT-N13U B1 - DD-wrt thread | TechEnclave - Indian Technology Forum
Page 26 of 27http://www.techenclave.com/community/threads/asus-rt-n13u-b1-dd-wrt-thread.113137/
Praks, May 25, 2011 #17
dinjo, May 25, 2011 #18
Would you be kind enough to post full method of doing DD WRT on N13 B1 just to
download torrents using external USB Thumb drive (4 GB FAT32).
When power comes it resumes it never fails And why FAT32 when you have
the power of NTFS :clap:
Wait for tomorrow I'll try post everything if i can get the time from my daily
routine (I'm bad at documentation)
--- Updated Post - Automerged ---
Time for show off see the single 6Gb file getting downloaded
And now see NTFS mounted
Trophy Points: 61
Trophy Points: 127
dinjoHell Yeah[Born Critic]
13/09/13 6:48 PMAsus RT-N13U B1 - DD-wrt thread | TechEnclave - Indian Technology Forum
Page 27 of 27http://www.techenclave.com/community/threads/asus-rt-n13u-b1-dd-wrt-thread.113137/
Advertising Positioning by
Digital Point
TechEnclave Contact Us Help Home Top
Terms and RulesForum software by XenForo™ ©2010-2013 XenForo Ltd.Trading System by XenCentral.com
WebRepcurrentVotenoRatingnoWeight
nihit, May 26, 2011 #19
Praks, May 26, 2011 #20
Page 1 of 71 → 71 Next >(You must log in or sign up to reply here.)
TweetTweet 0 1
Is there option to schedule downloads in DDWRT...for night downloading ...since i
have night UL plan ..
@dinjo
Oh Man, 220 Kb, more then enough speed ... No more selling of B1.
its ok if you don't write huge documentation. Just post screenshot.. or steps one
by one. Will manage somehow.
Really waiting to try this & make my B1 as 24*7 download hub.
Share This Page
Trophy Points: 19
nihitUpgraded User
Trophy Points: 61
PraksPrivileged Users
1 2 3 4 5 6
Home › Forums › Computer Hardware Zone › Networking ›
Recommend Be the first of your friends to recommend this.
