Folha1ASTM Plastics Standards - 2014/08/21DesignationTitleAnalytical MethodsD494 - 11Standard Test Method for Acetone Extraction of Phenolic Molded or Laminated ProductsD792 - 13Standard Test Methods for Density and Specific Gravity (Relative Density) of Plastics by DisplacementD1505 - 10Standard Test Method for Density of Plastics by the Density-Gradient TechniqueD1601 - 12Standard Test Method for Dilute Solution Viscosity of Ethylene PolymersD1603 - 12Standard Test Method for Carbon Black Content in Olefin PlasticsD1895 - 96(2010)e1Standard Test Methods for Apparent Density, Bulk Factor, and Pourability of Plastic MaterialsD1921 - 12Standard Test Methods for Particle Size (Sieve Analysis) of Plastic MaterialsD2124 - 99(2011)Standard Test Method for Analysis of Components in Poly(Vinyl Chloride) Compounds Using an Infrared Spectrophotometric TechniqueD2238 - 92(2012)e1Standard Test Methods for Absorbance of Polyethylene Due to Methyl Groups at 1378 cm1D2857 - 95(2007)Standard Practice for Dilute Solution Viscosity of PolymersD3016 - 97(2010)Standard Practice for Use of Liquid Exclusion Chromatography Terms and RelationshipsD3124 - 98(2011)Standard Test Method for Vinylidene Unsaturation in Polyethylene by Infrared SpectrophotometryD3465 - 14Standard Test Method for Purity of Monomeric Plasticizers by Gas ChromatographyD3591 - 97(2011)Standard Test Method for Determining Logarithmic Viscosity Number of Poly(Vinyl Chloride) (PVC) in Formulated CompoundsD3594 - 93(2013)Standard Test Method for Copolymerized Ethyl Acrylate In Ethylene-Ethyl Acrylate CopolymersD3749 - 13Standard Test Method for Residual Vinyl Chloride Monomer in Poly(Vinyl Chloride) Resins by Gas Chromatographic Headspace TechniqueD4001 - 13Standard Test Method for Determination of Weight-Average Molecular Weight of Polymers By Light ScatteringD4094 - 07Standard Test Method for Acid Content of Ethylene-Acrylic Acid CopolymersD4218 - 96(2008)Standard Test Method for Determination of Carbon Black Content in Polyethylene Compounds By the Muffle-Furnace TechniqueD4275 - 09Standard Test Method for Determination of Butylated Hydroxy Toluene (BHT) in Polymers of Ethylene and EthyleneVinyl Acetate (EVA) Copolymers By Gas ChromatographyD4443 - 13Standard Test Method for Determining Residual Vinyl Chloride Monomer Content in PPB Range in Vinyl Chloride Homo- and Co-Polymers by Headspace Gas ChromatographyD4526 - 12Standard Practice for Determination of Volatiles in Polymers by Static Headspace Gas ChromatographyD4603 - 03(2011)e1Standard Test Method for Determining Inherent Viscosity of Poly(Ethylene Terephthalate) (PET) by Glass Capillary ViscometerD4754 - 11Standard Test Method for Two-Sided Liquid Extraction of Plastic Materials Using FDA Migration CellD4883 - 08Standard Test Method for Density of Polyethylene by the Ultrasound TechniqueD5017 - 96(2009)e1Standard Test Method for Determination of Linear Low Density Polyethylene (LLDPE) Composition by Carbon-13 Nuclear Magnetic ResonanceD5225 - 14Standard Test Method for Measuring Solution Viscosity of Polymers with a Differential ViscometerD5226 - 98(2010)e1Standard Practice for Dissolving Polymer MaterialsD5227 - 13Standard Test Method for Measurement of Hexane Extractable Content of PolyolefinsD5296 - 11Standard Test Method for Molecular Weight Averages and Molecular Weight Distribution of Polystyrene by High Performance Size-Exclusion ChromatographyD5477 - 11Standard Practice for Identification of Polymer Layers or Inclusions by Fourier Transform Infrared Microspectroscopy (FT-IR)D5507 - 99(2012)Standard Test Method for Determination of Trace Organic Impurities in Monomer Grade Vinyl Chloride by Capillary Column/Multidimensional Gas ChromatographyD5508 - 94a(2009)e1Standard Test Method for Determination of Residual Acrylonitrile Monomer in Styrene-Acrylonitrile Copolymer Resins and Nitrile-Butadiene Rubber by Headspace-Capillary Gas Chromatography (HS-CGC)D5576 - 00(2013)Standard Practice for Determination of Structural Features in Polyolefins and Polyolefin Copolymers by Infrared Spectrophotometry (FT-IR)D5594 - 98(2012)Standard Test Method for Determination of the Vinyl Acetate Content of Ethylene-Vinyl Acetate (EVA) Copolymers by Fourier Transform Infrared Spectroscopy (FT-IR)D5630 - 13Standard Test Method for Ash Content in PlasticsD6042 - 09Standard Test Method for Determination of Phenolic Antioxidants and Erucamide Slip Additives in Polypropylene Homopolymer Formulations Using Liquid Chromatography (LC)D6247 - 10Standard Test Method for Determination of Elemental Content of Polyolefins by Wavelength Dispersive X-ray Fluorescence SpectrometryD6248 - 98(2012)e1Standard Test Method for Vinyl and Trans Unsaturation in Polyethylene by Infrared SpectrophotometryD6474 - 12Standard Test Method for Determining Molecular Weight Distribution and Molecular Weight Averages of Polyolefins by High Temperature Gel Permeation ChromatographyD6645 - 01(2010)Standard Test Method for Methyl (Comonomer) Content in Polyethylene by Infrared SpectrophotometryD6869 - 03(2011)Standard Test Method for Coulometric and Volumetric Determination of Moisture in Plastics Using the Karl Fischer Reaction (the Reaction of Iodine with Water)D6953 - 11Standard Test Method for Determination of Antioxidants and Erucamide Slip Additives in Polyethylene Using Liquid Chromatography (LC)D6980 - 12Standard Test Method for Determination of Moisture in Plastics by Loss in WeightD7083 - 04(2010)e1Standard Practice for Determination of Monomeric Plasticizers in Poly (Vinyl Chloride) (PVC) by Gas ChromatographyD7132 - 14Standard Test Method for Determination of Retained Blowing Agent in Extruded Polystyrene FoamD7134 - 05(2012)Standard Test Method for Molecular Mass Averages and Molecular Mass Distribution of Atactic Polystyrene by Matrix Assisted Laser Desorption/Ionization (MALDI)-Time of Flight (TOF) Mass Spectrometry (MS)D7191 - 10Standard Test Method for Determination of Moisture in Plastics by Relative Humidity SensorD7210 - 13Standard Practice for Extraction of Additives in Polyolefin PlasticsD7399 - 08Standard Test Method for Determination of the Amount of Polypropylene (PP) in Polypropylene/LDPE Mixtures Using Infrared Spectrophotometer (FTIR)D7486 - 08(2013)e1Standard Test Method for Measurement of Fines and Dust Particles on Plastic Pellets by Wet AnalysisD7567 - 09Standard Test Method for Determining Gel Content in Crosslinked Ethylene Plastics Using Pressurized Liquid ExtractionD7823 - 13Standard Test Method for Determination of Low Level, Regulated Phthalates in Poly (Vinyl Chloride) Plastics by Thermal DesorptionGas Chromatography/Mass ChromatographyCellular Materials - Plastics and ElastomersD1056 - 14Standard Specification for Flexible Cellular MaterialsSponge or Expanded RubberD1621 - 10Standard Test Method for Compressive Properties Of Rigid Cellular PlasticsD1622 / D1622M - 14Standard Test Method for Apparent Density of Rigid Cellular PlasticsD1623 - 09Standard Test Method for Tensile and Tensile Adhesion Properties of Rigid Cellular PlasticsD1667 - 05(2011)Standard Specification for Flexible Cellular Materials - Poly (Vinyl Chloride) Foam (Closed-Cell)D1786 - 10Standard Specification for Toluene DiisocyanateD2126 - 09Standard Test Method for Response of Rigid Cellular Plastics to Thermal and Humid AgingD2842 - 12Standard Test Method for Water Absorption of Rigid Cellular PlasticsD3453 - 12Standard Specification for Flexible Cellular MaterialsUrethane for Furniture and Automotive Cushioning, Bedding, and Similar ApplicationsD3489 - 11Standard Test Methods for Microcellular Urethane MaterialsD3574 - 11Standard Test Methods for Flexible Cellular MaterialsSlab, Bonded, and Molded Urethane FoamsD3575 - 14Standard Test Methods for Flexible Cellular Materials Made From Olefin PolymersD3576 - 04(2010)Standard Test Method for Cell Size of Rigid Cellular PlasticsD3676 - 13Standard Specification for Rubber Cellular Cushion Used for Carpet or Rug UnderlayD3748 - 14Standard Practice for Evaluating High-Density Rigid Cellular PlasticsD3768 - 11Standard Test Method for Microcellular UrethanesFlexural RecoveryD3769 - 10Standard Test Method for Microcellular Urethanes--High Temperature SagD3851 - 07(2012)Standard Specification for Urethane Microcellular Shoe Soling MaterialsD4273 - 11Standard Test Method for Polyurethane Raw Materials: Determination of Primary Hydroxyl Content of Polyether PolyolsD4274 - 11Standard Test Methods for Testing Polyurethane Raw Materials: Determination of Hydroxyl Numbers of PolyolsD4659 - 14Standard Test Methods for Polyurethane Raw Materials: Determination of Specific Gravity of IsocyanatesD4660 - 12Standard Test Methods for Polyurethane Raw Materials: Determination of the Isomer Content of ToluenediisocyanateD4661 - 13Standard Test Methods for Polyurethane Raw Materials: Determination of Total Chlorine in IsocyanatesD4662 - 08(2011)e1Standard Test Methods for Polyurethane Raw Materials: Determination of Acid and Alkalinity Numbers of PolyolsD4663 - 10Standard Test Method for Polyurethane Raw Materials Determination of Hydrolyzable Chlorine of IsocyanatesD4669 - 07(2013)e1Standard Test Method for Polyurethane Raw Materials: Determination of Specific Gravity of PolyolsD4670 - 07(2012)e1Standard Test Method for Polyurethane Raw Materials: Determination of Suspended Matter In PolyolsD4671 - 05(2010)e1Standard Test Method for Polyurethane Raw Materials Determination of Unsaturation of PolyolsD4672 - 12Standard Test Method for Polyurethane Raw Materials: Determination of Water Content of Polyols D4819 - 13Standard Specification for Flexible Cellular Materials Made From Polyolefin PlasticsD4875 - 11Standard Test Methods of Polyurethane Raw Materials: Determination of the Polymerized Ethylene Oxide Content of Polyether PolyolsD4877 - 10Standard Test Method for Polyurethane Raw Materials: Determination of APHA Color in IsocyanatesD4878 - 08Standard Test Methods for Polyurethane Raw Materials: Determination of Viscosity of PolyolsD4889 - 04(2011)Standard Test Methods for Polyurethane Raw Materials: Determination of Viscosity of Crude or Modified IsocyanatesD4890 - 13Standard Test Methods for Polyurethane Raw Materials: Determination of Gardner and APHA Color of PolyolsD5155 - 10Standard Test Methods for Polyurethane Raw Materials Determination of the Isocyanate Content of Aromatic IsocyanatesD5523 - 10Standard Test Method for Polyurethane Raw Materials Acidity by Argentometric Determination of Hydrolyzable Chlorine in Monomeric, Aromatic IsocyanatesD5629 - 11Standard Test Method for Polyurethane Raw Materials Determination of Acidity in Low-Acidity Aromatic Isocyanates and Polyurethane PrepolymersD5672 - 09Standard Test Method for Testing Flexible Cellular Materials Measurement of Indentation Force Deflection Using a 25-mm (1-in.) Deflection TechniqueD6099 - 13Standard Test Method for Polyurethane Raw Materials: Determination of Acidity in Moderate to High Acidity Aromatic IsocyanatesD6226 - 10Standard Test Method for Open Cell Content of Rigid Cellular PlasticsD6342 - 12Standard Practice for Polyurethane Raw Materials: Determining Hydroxyl Number of Polyols by Near Infrared (NIR) SpectroscopyD6437 - 05(2010)e1Standard Test Method for Polyurethane Raw Materials: alkalinity in Low-Alkalinity Polyols (Determination of CPR values of Polyols)D6576 - 13Standard Specification for Flexible Cellular Rubber Chemically BlownD6979 - 13Standard Test Method for Polyurethane Raw Materials: Determination of Basicity in Polyols, Expressed as Percent NitrogenD7133 - 11Standard Test Method for Polyurethane Raw Materials: Instrumental Measurement of Tristimulus CIELAB Color and Yellowness Index of LiquidsD7252 - 06(2011)e1Standard Test Method for Polyurethane Raw Materials: Determination of Monomer and Isomers in IsocyanatesD7253 - 06(2011)e1Standard Test Method for Polyurethane Raw Materials: Determination of Acidity as Acid Number for Polyether PolyolsD7487 - 13Standard Practice for Polyurethane Raw Materials: Polyurethane Foam Cup TestDurability of PlasticsD543 - 06Standard Practices for Evaluating the Resistance of Plastics to Chemical ReagentsD570 - 98(2010)e1Standard Test Method for Water Absorption of PlasticsD618 - 13Standard Practice for Conditioning Plastics for TestingD1042 - 12Standard Test Method for Linear Dimensional Changes of Plastics Caused by Exposure to Heat and MoistureD1435 - 13Standard Practice for Outdoor Weathering of PlasticsD1499 - 13Standard Practice for Filtered Open-Flame Carbon-Arc Exposures of PlasticsD1712 - 09(2014)Standard Practice for Resistance of Plastics to Sulfide StainingD2565 - 99(2008)Standard Practice for Xenon-Arc Exposure of Plastics Intended for Outdoor ApplicationsD3045 - 92(2010)Standard Practice for Heat Aging of Plastics Without LoadD4329 - 13Standard Practice for Fluorescent Ultraviolet (UV) Lamp Apparatus Exposure of PlasticsD4364 - 13Standard Practice for Performing Outdoor Accelerated Weathering Tests of Plastics Using Concentrated SunlightD4459 - 12Standard Practice for Xenon-Arc Exposure of Plastics Intended for Indoor ApplicationsD4674 - 02a(2010)Standard Practice for Accelerated Testing for Color Stability of Plastics Exposed to Indoor Office EnvironmentsD5870 - 11Standard Practice for Calculating Property Retention Index of PlasticsD6360 - 07Standard Practice for Enclosed Carbon-Arc Exposures of PlasticsEnvironmentally Degradable Plastics and Biobased ProductsD3826 - 98(2013)Standard Practice for Determining Degradation End Point in Degradable Polyethylene and Polypropylene Using a Tensile TestD5071 - 06(2013)Standard Practice for Exposure of Photodegradable Plastics in a Xenon Arc ApparatusD5208 - 14Standard Practice for Fluorescent Ultraviolet (UV) Exposure of Photodegradable PlasticsD5210 - 92(2007)Standard Test Method for Determining the Anaerobic Biodegradation of Plastic Materials in the Presence of Municipal Sewage SludgeD5272 - 08(2013)Standard Practice for Outdoor Exposure Testing of Photodegradable PlasticsD5338 - 11Standard Test Method for Determining Aerobic Biodegradation of Plastic Materials Under Controlled Composting Conditions, Incorporating Thermophilic TemperaturesD5511 - 12Standard Test Method for Determining Anaerobic Biodegradation of Plastic Materials Under High-Solids Anaerobic-Digestion ConditionsD5526 - 12Standard Test Method for Determining Anaerobic Biodegradation of Plastic Materials Under Accelerated Landfill ConditionsD5988 - 12Standard Test Method for Determining Aerobic Biodegradation of Plastic Materials in SoilD6340 - 98(2007)Standard Test Methods for Determining Aerobic Biodegradation of Radiolabeled Plastic Materials in an Aqueous or Compost EnvironmentD6400 - 12Standard Specification for Labeling of Plastics Designed to be Aerobically Composted in Municipal or Industrial FacilitiesD6691 - 09Standard Test Method for Determining Aerobic Biodegradation of Plastic Materials in the Marine Environment by a Defined Microbial Consortium or Natural Sea Water InoculumD6866 - 12Standard Test Methods for Determining the Biobased Content of Solid, Liquid, and Gaseous Samples Using Radiocarbon AnalysisD6868 - 11Standard Specification for Labeling of End Items that Incorporate Plastics and Polymers as Coatings or Additives with Paper and Other Substrates Designed to be Aerobically Composted in Municipal or Industrial FacilitiesD6954 - 04(2013)Standard Guide for Exposing and Testing Plastics that Degrade in the Environment by a Combination of Oxidation and BiodegradationD7026 - 13Standard Guide for Sampling and Reporting of Results for Determination of Biobased Content of Materials via Carbon Isotope AnalysisD7444 - 11Standard Practice for Heat and Humidity Aging of Oxidatively Degradable PlasticsD7473 - 12Standard Test Method for Weight Attrition of Plastic Materials in the Marine Environment by Open System Aquarium IncubationsD7475 - 11Standard Test Method for Determining the Aerobic Degradation and Anaerobic Biodegradation of Plastic Materials under Accelerated Bioreactor Landfill ConditionsExecutiveD4968 - 09Standard Guide for Annual Review of Test Methods and Specifications for PlasticsFilm, Sheeting, and Molded ProductsC1147 - 14Standard Practice for Determining the Short Term Tensile Weld Strength of Chemical-Resistant ThermoplasticsD882 - 12Standard Test Method for Tensile Properties of Thin Plastic SheetingD1004 - 13Standard Test Method for Tear Resistance (Graves Tear) of Plastic Film and SheetingD1204 - 14Standard Test Method for Linear Dimensional Changes of Nonrigid Thermoplastic Sheeting or Film at Elevated TemperatureD1239 - 14Standard Test Method for Resistance of Plastic Films to Extraction by ChemicalsD1593 - 13Standard Specification for Nonrigid Vinyl Chloride Plastic Film and SheetingD1709 - 09Standard Test Methods for Impact Resistance of Plastic Film by the Free-Falling Dart MethodD1894 - 14Standard Test Method for Static and Kinetic Coefficients of Friction of Plastic Film and SheetingD1922 - 09Standard Test Method for Propagation Tear Resistance of Plastic Film and Thin Sheeting by Pendulum MethodD1938 - 08Standard Test Method for Tear-Propagation Resistance (Trouser Tear) of Plastic Film and Thin Sheeting by a Single-Tear MethodD1998 - 13Standard Specification for Polyethylene Upright Storage TanksD2103 - 10Standard Specification for Polyethylene Film and SheetingD2463 - 10bStandard Test Method for Drop Impact Resistance of Blow-Molded Thermoplastic ContainersD2561 - 12Standard Test Method for Environmental Stress-Crack Resistance of Blow-Molded Polyethylene ContainersD2578 - 09Standard Test Method for Wetting Tension of Polyethylene and Polypropylene FilmsD2582 - 09Standard Test Method for Puncture-Propagation Tear Resistance of Plastic Film and Thin SheetingD2659 - 11Standard Test Method for Column Crush Properties of Blown Thermoplastic ContainersD2673 - 09Standard Specification for Oriented Polypropylene FilmD2684 - 10Standard Test Method for Permeability of Thermoplastic Containers to Packaged Reagents or Proprietary ProductsD2732 - 08Standard Test Method for Unrestrained Linear Thermal Shrinkage of Plastic Film and SheetingD2838 - 09Standard Test Method for Shrink Tension and Orientation Release Stress of Plastic Film and Thin SheetingD2911 - 10Standard Specification for Dimensions and Tolerances for Plastic BottlesD2923 - 13Standard Test Method for Rigidity of Polyolefin Film and SheetingD3354 - 11Standard Test Method for Blocking Load of Plastic Film by the Parallel Plate MethodD3420 - 08aStandard Test Method for Pendulum Impact Resistance of Plastic FilmD3981 - 09aStandard Specification for Polyethylene Films Made from Medium-Density Polyethylene for General Use and Packaging ApplicationsD4204 - 12Standard Practice for Preparing Plastic Film Specimens for a Round-Robin StudyD4272 - 14Standard Test Method for Total Energy Impact of Plastic Films By Dart DropD4321 - 09Standard Test Method for Package Yield of Plastic FilmD4397 - 10Standard Specification for Polyethylene Sheeting for Construction, Industrial, and Agricultural ApplicationsD4635 - 08aStandard Specification for Polyethylene Films Made from Low-Density Polyethylene for General Use and Packaging ApplicationsD4801 - 08Standard Specification for Polyethylene Sheeting in Thickness of 0.25 mm [0.010 in.] and GreaterD5047 - 09Standard Specification for Polyethylene Terephthalate Film and SheetingD5419 - 09Standard Test Method for Environmental Stress Crack Resistance (ESCR) of Threaded Plastic ClosuresD5946 - 09Standard Test Method for Corona-Treated Polymer Films Using Water Contact Angle MeasurementsD6287 - 09Standard Practice for Cutting Film and Sheeting Test SpecimensD6988 - 13Standard Guide for Determination of Thickness of Plastic Film Test SpecimensD7192 - 10Standard Test Method for High Speed Puncture Properties of Plastic Films Using Load and Displacement SensorsD7310 - 11Standard Guide for Defect Detection and Rating of Plastic Films Using Optical SensorsGovernment/Industry StandardizationD3892 - 93(2009)Standard Practice for Packaging/Packing of PlasticsD4000 - 13Standard Classification System for Specifying Plastic MaterialsD5740 - 11Standard Guide for Writing Material Standards in the Classification D4000 FormatD6436 - 14Standard Guide for Reporting Properties for Plastics and Thermoplastic ElastomersMechanical PropertiesD256 - 10Standard Test Methods for Determining the Izod Pendulum Impact Resistance of PlasticsD638 - 10Standard Test Method for Tensile Properties of PlasticsD695 - 10Standard Test Method for Compressive Properties of Rigid PlasticsD732 - 10Standard Test Method for Shear Strength of Plastics by Punch ToolD747 - 10Standard Test Method for Apparent Bending Modulus of Plastics by Means of a Cantilever BeamD785 - 08Standard Test Method for Rockwell Hardness of Plastics and Electrical Insulating MaterialsD790 - 10Standard Test Methods for Flexural Properties of Unreinforced and Reinforced Plastics and Electrical Insulating MaterialsD952 - 10Standard Test Method for Bond or Cohesive Strength of Sheet Plastics and Electrical Insulating MaterialsD953 - 10Standard Test Method for Bearing Strength of PlasticsD1043 - 10Standard Test Method for Stiffness Properties of Plastics as a Function of Temperature by Means of a Torsion TestD1044 - 13Standard Test Method for Resistance of Transparent Plastics to Surface AbrasionD1708 - 13Standard Test Method for Tensile Properties of Plastics by Use of Microtensile SpecimensD1822 - 13Standard Test Method for Tensile-Impact Energy to Break Plastics and Electrical Insulating MaterialsD2583 - 13aStandard Test Method for Indentation Hardness of Rigid Plastics by Means of a Barcol ImpressorD2990 - 09Standard Test Methods for Tensile, Compressive, and Flexural Creep and Creep-Rupture of PlasticsD3763 - 10e1Standard Test Method for High Speed Puncture Properties of Plastics Using Load and Displacement SensorsD4065 - 12Standard Practice for Plastics: Dynamic Mechanical Properties: Determination and Report of Procedures D4092 - 07(2013)Standard Terminology for Plastics: Dynamic Mechanical PropertiesD4093 - 95(2010)Standard Test Method for Photoelastic Measurements of Birefringence and Residual Strains in Transparent or Translucent Plastic MaterialsD4440 - 08Standard Test Method for Plastics: Dynamic Mechanical Properties Melt RheologyD4473 - 08Standard Test Method for Plastics: Dynamic Mechanical Properties: Cure BehaviorD4508 - 10Standard Test Method for Chip Impact Strength of PlasticsD4812 - 11Standard Test Method for Unnotched Cantilever Beam Impact Resistance of PlasticsD5023 - 07Standard Test Method for Plastics: Dynamic Mechanical Properties: In Flexure (Three-Point Bending)D5024 - 07Standard Test Method for Plastics: Dynamic Mechanical Properties: In CompressionD5026 - 06Standard Test Method for Plastics: Dynamic Mechanical Properties: In TensionD5045 - 99(2007)e1Standard Test Methods for Plane-Strain Fracture Toughness and Strain Energy Release Rate of Plastic MaterialsD5083 - 10Standard Test Method for Tensile Properties of Reinforced Thermosetting Plastics Using Straight-Sided SpecimensD5279 - 13Standard Test Method for Plastics: Dynamic Mechanical Properties: In TorsionD5418 - 07Standard Test Method for Plastics: Dynamic Mechanical Properties: In Flexure (Dual Cantilever Beam)D5420 - 10Standard Test Method for Impact Resistance of Flat, Rigid Plastic Specimen by Means of a Striker Impacted by a Falling Weight (Gardner Impact)D5592 - 94(2010)Standard Guide for Material Properties Needed in Engineering Design Using PlasticsD5628 - 10Standard Test Method for Impact Resistance of Flat, Rigid Plastic Specimens by Means of a Falling Dart (Tup or Falling Mass)D5947 - 11Standard Test Methods for Physical Dimensions of Solid Plastics SpecimensD6068 - 10Standard Test Method for Determining J-R Curves of Plastic MaterialsD6110 - 10Standard Test Method for Determining the Charpy Impact Resistance of Notched Specimens of PlasticsD6272 - 10Standard Test Method for Flexural Properties of Unreinforced and Reinforced Plastics and Electrical Insulating Materials by Four-Point BendingD6395 - 11Standard Test Method for Flatwise Flexural Impact Resistance of Rigid PlasticsD7027 - 13Standard Test Method for Evaluation of Scratch Resistance of Polymeric Coatings and Plastics Using an Instrumented Scratch MachineD7107 - 04(2010)Standard Test Method for Creep Measurement of Self-Lubricating BushingsD7774 - 12Standard Test Method for Flexural Fatigue Properties of PlasticsD7791 - 12Standard Test Method for Uniaxial Fatigue Properties of PlasticsOptical PropertiesD542 - 14Standard Test Method for Index of Refraction of Transparent Organic PlasticsD1003 - 13Standard Test Method for Haze and Luminous Transmittance of Transparent PlasticsD1746 - 09Standard Test Method for Transparency of Plastic SheetingD2457 - 13Standard Test Method for Specular Gloss of Plastic Films and Solid PlasticsD6290 - 13Standard Test Method for Color Determination of Plastic PelletsPlastic Building ProductsD1494 - 12Standard Test Method for Diffuse Light Transmission Factor of Reinforced Plastics PanelsD3678 - 97(2008)e1Standard Specification for Rigid Poly(Vinyl Chloride) (PVC) Interior-Profile ExtrusionsD3679 - 13Standard Specification for Rigid Poly (Vinyl Chloride) (PVC) SidingD3841 - 97(2008)e1Standard Specification for Glass-Fiber-Reinforced Polyester Plastic PanelsD4068 - 09Standard Specification for Chlorinated Polyethylene (CPE) Sheeting for Concealed Water-Containment MembraneD4226 - 11Standard Test Methods for Impact Resistance of Rigid Poly(Vinyl Chloride) (PVC) Building ProductsD4477 - 09Standard Specification for Rigid (Unplasticized) Poly(Vinyl Chloride) (PVC) SoffitD4495 - 12Standard Test Method for Impact Resistance of Poly(Vinyl Chloride) (PVC) Rigid Profiles by Means of a Falling WeightD4551 - 12Standard Specification for Poly(Vinyl Chloride) (PVC) Plastic Flexible Concealed Water-Containment MembraneD4726 - 09Standard Specification for Rigid Poly(Vinyl Chloride) (PVC) Exterior-Profile Extrusions Used for Assembled Windows and DoorsD4756 - 13Standard Practice for Installation of Rigid Poly(Vinyl Chloride) (PVC) Siding and SoffitD4803 - 10Standard Test Method for Predicting Heat Buildup in PVC Building ProductsD5206 - 13Standard Test Method for Windload Resistance of Rigid Plastic SidingD5319 - 12Standard Specification for Glass-Fiber Reinforced Polyester Wall and Ceiling PanelsD5926 - 11Standard Specification for Poly (Vinyl Chloride) (PVC) Gaskets for Drain, Waste, and Vent (DWV), Sewer, Sanitary, and Storm Plumbing SystemsD6777 - 02(2010)e1Standard Test Method for Relative Rigidity of Poly(Vinyl Chloride)(PVC) SidingD6864 - 11Standard Specification for Color and Appearance Retention of Solid Colored Plastic Siding ProductsD7082 - 04(2010)Standard Specification for Polyethylene Stay In Place Form System for End Walls for Drainage PipeD7251 - 11Standard Specification for Color and Appearance Retention of Variegated Color Plastic Siding ProductsD7254 - 07Standard Specification for Polypropylene (PP) SidingD7445 - 09Standard Specification for Rigid Poly(Vinyl Chloride) (PVC) Siding with Foam Plastic Backing (Backed Vinyl Siding)D7793 - 13Standard Specification for Insulated Vinyl SidingD7856 - 14Standard Specification for Color and Appearance Retention of Solid and Variegated Color Plastic Siding Products using CIELab Color SpacePlastic LumberD6108 - 13Standard Test Method for Compressive Properties of Plastic Lumber and ShapesD6109 - 13Standard Test Methods for Flexural Properties of Unreinforced and Reinforced Plastic Lumber and Related ProductsD6111 - 13aStandard Test Method for Bulk Density And Specific Gravity of Plastic Lumber and Shapes by DisplacementD6112 - 13Standard Test Methods for Compressive and Flexural Creep and Creep-Rupture of Plastic Lumber and ShapesD6117 - 13e1Standard Test Methods for Mechanical Fasteners in Plastic Lumber and ShapesD6341 - 14Standard Test Method for Determination of the Linear Coefficient of Thermal Expansion of Plastic Lumber and Plastic Lumber Shapes Between 30 and 140F (34.4 and 60C)D6662 - 13Standard Specification for Polyolefin-Based Plastic Lumber Decking BoardsD7258 - 14Standard Specification for Polymeric PilesD7568 - 13Standard Specification for Polyethylene-Based Structural-Grade Plastic Lumber for Outdoor ApplicationsRecycled PlasticsD5577 - 94(2010)e1Standard Guide for Techniques to Separate and Identify Contaminants in Recycled PlasticsD5814 - 10Standard Practice for Determination of Contamination in Recycled Poly(Ethylene Terephthalate) (PET) Flakes and Chips Using a Plaque TestD5991 - 09Standard Practice for Separation and Identification of Poly(Vinyl Chloride) (PVC) Contamination in Poly(Ethylene Terephthalate) (PET) FlakeD6265 - 09Standard Practice for Separation of Contaminants in Polymers Using an Extruder Filter TestD6288 - 09Standard Practice for Separation and Washing of Recycled Plastics Prior to TestingD7209 - 06Standard Guide for Waste Reduction, Resource Recovery, and Use of Recycled Polymeric Materials and ProductsD7611 / D7611M - 13Standard Practice for Coding Plastic Manufactured Articles for Resin IdentificationReinforced Plastic Piping Systems and Chemical EquipmentC581 - 03(2008)e1Standard Practice for Determining Chemical Resistance of Thermosetting Resins Used in Glass-Fiber-Reinforced Structures Intended for Liquid ServiceC582 - 09Standard Specification for Contact-Molded Reinforced Thermosetting Plastic (RTP) Laminates for Corrosion-Resistant EquipmentD2105 - 01(2014)Standard Test Method for Longitudinal Tensile Properties of Fiberglass (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe and TubeD2143 - 00(2010)Standard Test Method for Cyclic Pressure Strength of Reinforced, Thermosetting Plastic PipeD2310 - 06(2012)Standard Classification for Machine-Made Fiberglass (Glass-Fiber-Reinforced Thermosetting-Resin) PipeD2517 - 06(2011)Standard Specification for Reinforced Epoxy Resin Gas Pressure Pipe and Fittings D2924 - 12Standard Test Method for External Pressure Resistance of Fiberglass (Glass-Fiber-Reinforced Thermosetting-Resin) PipeD2925 - 01(2007)e1Standard Test Method for Beam Deflection of "Fiberglass" (Glass-Fiber-Reinforced Thermosetting Resin) Pipe Under Full Bore FlowD2992 - 12Standard Practice for Obtaining Hydrostatic or Pressure Design Basis for Fiberglass (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe and FittingsD2996 - 01(2007)e1Standard Specification for Filament-Wound "Fiberglass" (Glass-Fiber-Reinforced Thermosetting-Resin) PipeD2997 - 01(2007)e1Standard Specification for Centrifugally Cast "Fiberglass" (Glass-Fiber-Reinforced Thermosetting-Resin) PipeD3262 - 11Standard Specification for Fiberglass (Glass-Fiber-Reinforced Thermosetting-Resin) Sewer PipeD3299 - 10Standard Specification for Filament-Wound Glass-Fiber-Reinforced Thermoset Resin Corrosion-Resistant TanksD3517 - 14Standard Specification for Fiberglass (Glass-Fiber-Reinforced Thermosetting-Resin) Pressure PipeD3567 - 97(2011)Standard Practice for Determining Dimensions of Fiberglass (Glass-Fiber-Reinforced Thermosetting Resin) Pipe and FittingsD3681 - 12e1Standard Test Method for Chemical Resistance of Fiberglass (GlassFiberReinforced Thermosetting-Resin) Pipe in a Deflected ConditionD3753 - 12e1Standard Specification for Glass-Fiber-Reinforced Polyester Manholes and WetwellsD3754 - 14Standard Specification for Fiberglass (Glass-Fiber-Reinforced Thermosetting-Resin) Sewer and Industrial Pressure PipeD3839 - 14Standard Guide for Underground Installation of Fiberglass (Glass-Fiber Reinforced Thermosetting-Resin) PipeD3840 - 14Standard Specification for Fiberglass (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe Fittings for Nonpressure ApplicationsD3982 - 08(2014)Standard Specification for Contact Molded Fiberglass (Glass Fiber Reinforced Thermosetting Resin) DuctsD4024 - 12Standard Specification for Machine Made Fiberglass (Glass-Fiber-Reinforced Thermosetting Resin) FlangesD4097 - 01(2010)Standard Specification for Contact-Molded Glass-Fiber-Reinforced Thermoset Resin Corrosion-Resistant TanksD4161 - 14Standard Specification for Fiberglass (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe Joints Using Flexible Elastomeric SealsD4167 - 97(2007)Standard Specification for Fiber-Reinforced Plastic Fans and BlowersD4398 - 07Standard Test Method for Determining the Chemical Resistance of Fiberglass-Reinforced Thermosetting Resins by One-Side Panel ExposureD5364 - 08e1Standard Guide for Design, Fabrication, and Erection of Fiberglass Reinforced Plastic Chimney Liners with Coal-Fired UnitsD5365 - 12Standard Test Method for Long-Term Ring-Bending Strain of Fiberglass (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe D5421 - 05(2010)Standard Specification for Contact Molded "Fiberglass" (Glass-Fiber-Reinforced Thermosetting Resin) FlangesD5677 - 05(2010)Standard Specification for Fiberglass (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe and Pipe Fittings, Adhesive Bonded Joint Type, for Aviation Jet Turbine Fuel LinesD5685 - 11Standard Specification for "Fiberglass" (Glass-Fiber-Reinforced Thermosetting-Resin) Pressure Pipe FittingsD5813 - 04(2012)Standard Specification for Cured-In-Place Thermosetting Resin Sewer Piping SystemsD6041 - 11Standard Specification for Contact-Molded Fiberglass (Glass-Fiber-Reinforced Thermosetting Resin) Corrosion Resistant Pipe and FittingsD6783 - 05(2011)Standard Specification for Polymer Concrete PipeReinforced Thermosetting PlasticsD2291 - 09Standard Practice for Fabrication of Ring Test Specimens for Glass-Resin CompositesD2343 - 09Standard Test Method for Tensile Properties of Glass Fiber Strands, Yarns, and Rovings Used in Reinforced PlasticsD2562 - 94(2008)Standard Practice for Classifying Visual Defects in Parts Molded from Reinforced Thermosetting PlasticsD2563 - 08Standard Practice for Classifying Visual Defects in Glass-Reinforced Plastic Laminate PartsD2584 - 11Standard Test Method for Ignition Loss of Cured Reinforced ResinsD2734 - 09Standard Test Methods for Void Content of Reinforced PlasticsD3647 - 09Standard Practice for Classifying Reinforced Plastic Pultruded Shapes According to CompositionD3846 - 08Standard Test Method for In-Plane Shear Strength of Reinforced PlasticsD3914 - 02(2008)Standard Test Method for In-Plane Shear Strength of Pultruded Glass-Reinforced Plastic RodD3916 - 08Standard Test Method for Tensile Properties of Pultruded Glass-Fiber-Reinforced Plastic RodD3917 - 12Standard Specification for Dimensional Tolerance of Thermosetting Glass-Reinforced Plastic Pultruded ShapesD3918 - 11Standard Terminology Relating to Reinforced Plastic Pultruded ProductsD4385 - 13Standard Practice for Classifying Visual Defects in Thermosetting Reinforced Plastic Pultruded ProductsD4475 - 02(2008)Standard Test Method for Apparent Horizontal Shear Strength of Pultruded Reinforced Plastic Rods By the Short-Beam MethodD4476 / D4476M - 14Standard Test Method for Flexural Properties of Fiber Reinforced Pultruded Plastic RodsD5028 - 09Standard Test Method for Curing Properties of Pultrusion Resins by Thermal AnalysisD5117 - 09Standard Test Method for Dye Penetration of Solid Fiberglass Reinforced Pultruded StockD7029 - 09Standard Test Method for Determination of Reactivity of Unsaturated Polyesters and Vinyl Esters at 180.0F [82.2C]D7745 - 11Standard Practice for Testing Pultruded CompositesSpecimen PreparationD955 - 08(2014)Standard Test Method of Measuring Shrinkage from Mold Dimensions of ThermoplasticsD957 - 12Standard Practice for Determining Surface Temperature of Molds for PlasticsD1896 / D1896M - 10Standard Practice for Transfer Molding Test Specimens of Thermosetting CompoundsD3419 - 12Standard Practice for In-Line Screw-Injection Molding Test Specimens From Thermosetting CompoundsD3641 - 14Standard Practice for Injection Molding Test Specimens of Thermoplastic Molding and Extrusion MaterialsD4703 - 10aStandard Practice for Compression Molding Thermoplastic Materials into Test Specimens, Plaques, or SheetsD5224 - 12Standard Practice for Compression Molding Test Specimens of Thermosetting Molding CompoundsD6289 - 13Standard Test Method for Measuring Shrinkage from Mold Dimensions of Molded Thermosetting PlasticsTerminologyD883 - 12Standard Terminology Relating to PlasticsD1600 - 14Standard Terminology for Abbreviated Terms Relating to PlasticsD7711 - 11e1Standard Guide for Description of Polymer Pellet DefectsThermal PropertiesD635 - 10Standard Test Method for Rate of Burning and/or Extent and Time of Burning of Plastics in a Horizontal PositionD648 - 07Standard Test Method for Deflection Temperature of Plastics Under Flexural Load in the Edgewise PositionD696 - 08e1Standard Test Method for Coefficient of Linear Thermal Expansion of Plastics Between 30C and 30C with a Vitreous Silica DilatometerD731 - 10Standard Test Method for Molding Index of Thermosetting Molding PowderD746 - 13Standard Test Method for Brittleness Temperature of Plastics and Elastomers by ImpactD1238 - 13Standard Test Method for Melt Flow Rates of Thermoplastics by Extrusion PlastometerD1525 - 09Standard Test Method for Vicat Softening Temperature of PlasticsD1790 - 08Standard Test Method for Brittleness Temperature of Plastic Sheeting by ImpactD1929 - 13aStandard Test Method for Determining Ignition Temperature of PlasticsD2843 - 10Standard Test Method for Density of Smoke from the Burning or Decomposition of PlasticsD2863 - 13Standard Test Method for Measuring the Minimum Oxygen Concentration to Support Candle-Like Combustion of Plastics (Oxygen Index)D3014 - 11Standard Test Method for Flame Height, Time of Burning, and Loss of Mass of Rigid Thermoset Cellular Plastics in a Vertical PositionD3123 - 09Standard Test Method for Spiral Flow of Low-Pressure Thermosetting Molding CompoundsD3364 - 99(2011)Standard Test Method for Flow Rates for Poly(Vinyl Chloride) with Molecular Structural ImplicationsD3418 - 12e1Standard Test Method for Transition Temperatures and Enthalpies of Fusion and Crystallization of Polymers by Differential Scanning CalorimetryD3675 - 14Standard Test Method for Surface Flammability of Flexible Cellular Materials Using a Radiant Heat Energy SourceD3795 - 00a(2012)Standard Test Method for Thermal Flow, Cure, and Behavior Properties of Pourable Thermosetting Materials by Torque RheometerD3801 - 10Standard Test Method for Measuring the Comparative Burning Characteristics of Solid Plastics in a Vertical PositionD3835 - 08Standard Test Method for Determination of Properties of Polymeric Materials by Means of a Capillary RheometerD3895 - 07Standard Test Method for Oxidative-Induction Time of Polyolefins by Differential Scanning CalorimetryD4804 - 09Standard Test Method for Determining the Flammability Characteristics of Nonrigid Solid PlasticsD4986 - 10Standard Test Method for Horizontal Burning Characteristics of Cellular Polymeric MaterialsD5025 - 12Standard Specification for Laboratory Burner Used for Small-Scale Burning Tests on Plastic MaterialsD5048 - 14Standard Test Method for Measuring the Comparative Burning Characteristics and Resistance to Burn-Through of Solid Plastics Using a 125-mm FlameD5132 - 11Standard Test Method for Horizontal Burning Rate of Polymeric Materials Used in Occupant Compartments of Motor VehiclesD5207 - 14Standard Practice for Confirmation of 20mm (50W) and 125mm (500W) Test Flames for Small-Scale Burning Tests on Plastic MaterialsD5422 - 09Standard Test Method for Measurement of Properties of Thermoplastic Materials by Screw-Extrusion Capillary RheometerD5930 - 09Standard Test Method for Thermal Conductivity of Plastics by Means of a Transient Line-Source TechniqueD7309 - 13Standard Test Method for Determining Flammability Characteristics of Plastics and Other Solid Materials Using Microscale Combustion CalorimetryThermoplastic MaterialsD706 - 09Standard Classification System and Basis for Specifications for Cellulose Acetate Molding and Extrusion CompoundsD707 - 09Standard Classification System and Basis for Specification for Cellulose Acetate Butyrate Molding and Extrusion CompoundsD787 - 12Standard Specification for Ethyl Cellulose Molding and Extrusion CompoundsD788 - 12Standard Classification System for Poly(Methyl Methacrylate) (PMMA) Molding and Extrusion CompoundsD789 - 07e1Standard Test Methods for Determination of Solution Viscosities of Polyamide (PA)D1045 - 14Standard Test Methods for Sampling and Testing Plasticizers Used in PlasticsD1203 - 10Standard Test Methods for Volatile Loss From Plastics Using Activated Carbon MethodsD1243 - 95(2008)Standard Test Method for Dilute Solution Viscosity of Vinyl Chloride PolymersD1248 - 12Standard Specification for Polyethylene Plastics Extrusion Materials for Wire and CableD1430 - 11Standard Classification System for Polychlorotrifluoroethylene (PCTFE) PlasticsD1562 - 09Standard Classification System and Basis for Specification for Cellulose Acetate Propionate Molding and Extrusion CompoundsD1693 - 13Standard Test Method for Environmental Stress-Cracking of Ethylene PlasticsD1710 - 08Standard Specification for Extruded Polytetrafluoroethylene (PTFE) Rod, Heavy Walled Tubing and Basic ShapesD1755 - 09Standard Specification for Poly(Vinyl Chloride) ResinsD1784 - 11Standard Specification for Rigid Poly(Vinyl Chloride) (PVC) Compounds and Chlorinated Poly(Vinyl Chloride) (CPVC) CompoundsD1823 - 95(2009)Standard Test Method for Apparent Viscosity of Plastisols and Organosols at High Shear Rates by Extrusion ViscometerD1824 - 95(2010)Standard Test Method for Apparent Viscosity of Plastisols and Organosols at Low Shear RatesD2115 - 10Standard Practice for Oven Heat Stability of Poly(Vinyl Chloride) CompositionsD2116 - 07(2012)Standard Specification for FEP-Fluorocarbon Molding and Extrusion MaterialsD2222 - 13Standard Test Method for Methanol Extract of Vinyl Chloride ResinsD2287 - 12Standard Specification for Nonrigid Vinyl Chloride Polymer and Copolymer Molding and Extrusion CompoundsD2383 - 14Standard Practice for Testing Plasticizer Compatibility in Poly(Vinyl Chloride) (PVC) Compounds Under Humid ConditionsD2396 - 94(2012)Standard Test Methods for Powder-Mix Time of Poly(Vinyl Chloride) (PVC) Resins Using a Torque RheometerD2538 - 02(2010)Standard Practice for Fusion of Poly(Vinyl Chloride) (PVC) Compounds Using a Torque RheometerD2581 - 09Standard Specification for Polybutylene (PB) Plastics Molding and Extrusion MaterialsD2647 - 10Standard Specification for Crosslinkable Ethylene PlasticsD2765 - 11Standard Test Methods for Determination of Gel Content and Swell Ratio of Crosslinked Ethylene PlasticsD2839 - 10Standard Practice for Use of a Melt Index Strand for Determining Density of PolyethyleneD3012 - 13Standard Test Method for Thermal-Oxidative Stability of Polypropylene Using a Specimen Rotator Within an OvenD3030 - 11Standard Test Method for Volatile Matter (Including Water) of Vinyl Chloride ResinsD3159 - 10Standard Specification for Modified ETFE-Fluoropolymer Molding and Extrusion MaterialsD3222 - 05(2010)Standard Specification for Unmodified Poly(Vinylidene Fluoride) (PVDF) Molding Extrusion and Coating MaterialsD3275 - 08(2013)Standard Classification System for E-CTFE-Fluoroplastic Molding, Extrusion, and Coating MaterialsD3291 - 11Standard Practice for Compatibility of Plasticizers in Poly(Vinyl Chloride) Plastics Under CompressionD3294 - 09Standard Specification for PTFE Resin Molded Sheet and Molded Basic ShapesD3295 - 06(2011)Standard Specification for PTFE Tubing, Miniature Beading and Spiral Cut TubingD3296 - 14Standard Specification for FEP-Fluorocarbon TubeD3307 - 10Standard Specification for Perfluoroalkoxy (PFA)-Fluorocarbon Resin Molding and Extrusion MaterialsD3308 - 12Standard Specification for PTFE Resin Skived TapeD3350 - 12e1Standard Specification for Polyethylene Plastics Pipe and Fittings MaterialsD3367 - 13Standard Test Method for Plasticizer Sorption of Poly(Vinyl Chloride) Resins Under Applied Centrifugal ForceD3368 - 14Standard Specification for FEP-Fluorocarbon Sheet and FilmD3595 - 14Standard Specification for Polychlorotrifluoroethylene (PCTFE) Extruded Plastic Sheet and FilmD3596 - 13Standard Practice for Determination of Gels (Fisheyes) In General-Purpose Poly(Vinyl Chloride) (PVC) ResinsD3915 - 06Standard Specification for Rigid Poly(Vinyl Chloride) (PVC) and Chlorinated Poly(Vinyl Chloride) (CPVC) Compounds for Plastic Pipe and Fittings Used in Pressure ApplicationsD3935 - 09Standard Specification for Polycarbonate (PC) Unfilled and Reinforced MaterialD3965 - 11Standard Classification System and Basis for Specifications for Rigid Acrylonitrile-Butadiene-Styrene (ABS) Materials for Pipe and FittingsD4020 - 11Standard Specification for Ultra-High-Molecular-Weight Polyethylene Molding and Extrusion MaterialsD4066 - 13Standard Classification System for Nylon Injection and Extrusion Materials (PA)D4067 - 11Standard Classification System for and Basis for Specification for Reinforced and Filled Poly(Phenylene Sulfide) (PPS) Injection Molding and Extrusion Materials Using ASTM MethodsD4101 - 14Standard Specification for Polypropylene Injection and Extrusion MaterialsD4203 - 12Standard Specification for and Basis for Specifications for Styrene-Acrylonitrile (SAN) Injection and Extrusion MaterialsD4216 - 13Standard Specification for Rigid Poly(Vinyl Chloride) (PVC) and Related PVC and Chlorinated Poly(Vinyl Chloride) (CPVC) Building Products CompoundsD4349 - 10Classification System and Basis for Specification for Polyphenylene Ether (PPE) MaterialsD4396 - 06Standard Specification for Rigid Poly(Vinyl Chloride) (PVC) and Chlorinated Poly(Vinyl Chloride) (CPVC) Compounds for Plastic Pipe and Fittings Used in Nonpressure ApplicationsD4441 - 04(2010)Standard Specification for Aqueous Dispersions of PolytetrafluoroethyleneD4549 - 11Standard Classification System and Basis for Specification for Polystyrene and Rubber-Modified Polystyrene Molding and Extrusion Materials (PS)D4591 - 07(2012)Standard Test Method for Determining Temperatures and Heats of Transitions of Fluoropolymers by Differential Scanning CalorimetryD4634 - 11aStandard Classification System and Basis for Specification for Styrene-Maleic Anhydride Molding and Extrusion Materials (S/MA)D4673 - 02(2008)Standard Classification System for Acrylonitrile-Butadiene-Styrene (ABS) Plastics and Alloys Molding and Extrusion MaterialsD4745 - 11ae1Standard Specification for Filled Compounds of Polytetrafluoroethylene (PTFE) Molding and Extrusion MaterialsD4802 - 10Standard Specification for Poly(Methyl Methacrylate) Acrylic Plastic SheetD4894 - 07(2012)Standard Specification for Polytetrafluoroethylene (PTFE) Granular Molding and Ram Extrusion Materials D4895 - 10Standard Specification for Polytetrafluoroethylene (PTFE) Resin Produced From DispersionD4969 - 07(2012)Standard Specification for Polytetrafluoroethylene(PTFE) Coated Glass FabricD4976 - 12aStandard Specification for Polyethylene Plastics Molding and Extrusion MaterialsD5138 - 11Standard Classification System and Basis for Specification for Liquid Crystal Polymers Molding and Extrusion Materials (LCP)D5203 - 07Standard Specification for Polyethylene Plastics Molding and Extrusion Materials from Recycled Post-Consumer (HDPE) SourcesD5204 - 13Standard Classification System for Polyamide-Imide (PAI) Molding and Extrusion MaterialsD5205 - 10Standard Classification System for Polyetherimide (PEI) MaterialsD5260 - 04(2010)Standard Classification for Chemical Resistance of Poly(Vinyl Chloride) (PVC) Homopolymer and Copolymer Compounds and Chlorinated Poly(Vinyl Chloride) (CPVC) CompoundsD5336 - 09Standard Specification for Polyphthalamide (PPA) Injection Molding MaterialsD5436 - 13Standard Specification for Cast Poly(Methyl Methacrylate) Plastic Rods, Tubes, and ShapesD5491 - 08Standard Classification for Recycled Post-Consumer Polyethylene Film Sources for Molding and Extrusion MaterialsD5492 - 10Standard Test Method for Determination of Xylene Solubles in Propylene PlasticsD5575 - 07(2013)Standard Classification System for Copolymers of Vinylidene Fluoride (VDF) with Other Fluorinated MonomersD5675 - 13Standard Classification for Low Molecular Weight PTFE and FEP Micronized PowdersD5857 - 14Standard Specification for Polypropylene Injection and Extrusion Materials Using ISO Protocol and MethodologyD5927 - 09Standard Classification System for Thermoplastic Polyester (TPES) Injection and Extrusion Materials Based on ISO Test MethodsD5989 - 14aStandard Specification for Extruded and Monomer Cast Shapes Made from Nylon (PA)D5998 - 10Standard Specification for Molded Polyethylene Shipping and Storage DrumsD6040 - 12Standard Guide to Standard Test Methods for Unsintered Polytetrafluoroethylene (PTFE) Extruded Film or TapeD6098 - 10Standard Specification for Extruded and Compression Molded Shapes Made from Polycarbonate (PC)D6100 - 14Standard Specification for Extruded, Compression Molded and Injection Molded Polyoxymethylene Shapes (POM)D6150 - 09Standard Test Method for Estimating Processing Losses of Plastisols and Organosols Due to VolatilityD6261 - 14Standard Specification for Extruded and Compression Molded Basic Shapes Made from Thermoplastic Polyester (TPES)D6262 - 12Standard Specification for Extruded, Compression Molded, and Injection Molded Basic Shapes of Poly(aryl ether ketone) (PAEK)D6263 - 11Standard Specification for Extruded Rods and Bars Made From Rigid Poly(Vinyl Chloride) (PVC) and Chlorinated Poly(Vinyl Chloride) (CPVC)D6338 - 10Standard Classification System for Highly Crosslinked Thermoplastic Vulcanizates (HCTPVs) Based on ASTM Standard Test MethodsD6339 - 11Standard Classification System for and Basis for Specifications for Syndiotactic Polystyrene Molding and Extrusion (SPS)D6358 - 11Standard Classification System and Basis for Specification for Poly (Phenylene Sulfide) (PPS) Injection Molding and Extrusion Materials Using ISO MethodsD6394 - 14Standard Specification for Sulfone Plastics (SP)D6456 - 10Standard Specification for Finished Parts Made from Polyimide ResinD6457 - 08(2013)Standard Specification for Extruded and Compression Molded Rod and Heavy-Walled Tubing Made from Polytetrafluoroethylene (PTFE)D6585 - 11Standard Specification for Unsintered Polytetrafluoroethylene (PTFE) Extruded Film or TapeD6712 - 01(2009)Standard Specification for Ultra-High-Molecular-Weight Polyethylene (UHMW-PE) Solid Plastic ShapesD6713 - 14Standard Specification for Extruded and Compression Molded Shapes Made from Poly(Vinylidene Fluoride) (PVDF)D6778 - 12Standard Classification System and Basis for Specification for Polyoxymethylene Molding and Extrusion Materials (POM)D6779 - 12aStandard Classification System for and Basis of Specification for Polyamide Molding and Extrusion Materials (PA)D6835 - 08(2014)Standard Classification System for Thermoplastic Elastomer-Ether-Ester Molding and Extrusion Materials (TEEE)D6865 - 11Standard Classification System and Basis for Specifications for AcrylonitrileStyreneAcrylate (ASA) and AcrylonitrileEPDM&D6867 - 03(2009)Standard Specification for Perfluoroalkoxy (PFA)-Fluoropolymer TubingD7193 - 11Standard Specification for Unsintered Pigmented Polytetrafluoroethylene (PTFE) Extruded Film or TapeD7194 - 12Standard Specification for Aerospace Parts Machined from Polychlorotrifluoroethylene (PCTFE)D7211 - 13Standard Specification for Parts Machined from Polychlorotrifluoroethylene (PCTFE) and Intended for General UseD7292 - 12Standard Specification for Extruded, Compression-Molded, and Injection-Molded Basic Shapes of Polyamide-Imide (PAI)D7293 - 12Standard Specification for Extruded and Compression-Molded Shapes Made from Polyetherimide (PEI)D7436 - 12Standard Classification System for Unfilled Polyethylene Plastics Molding and Extrusion Materials with a Fractional Melt Index Using ISO Protocol and MethodologyD7471 - 09(2014)Standard Specification for CPT-Fluoropolymer Molding and Extrusion MaterialsD7472 - 09(2014)Standard Specification for EFEP-Fluoropolymer Molding and Extrusion MaterialsD7474 - 12Standard Practice for Determining Residual Stresses in Extruded or Molded Sulfone Plastic (SP) Parts by Immersion in Various Chemical ReagentsThermosetting MaterialsD704 - 99(2012)Standard Specification for Melamine-Formaldehyde Molding CompoundsD705 - 99(2012)Standard Specification for Urea-Formaldehyde Molding CompoundsD1201 - 13Standard Specification for Thermosetting Polyester Molding CompoundsD1636 - 13Standard Specification for Allyl Molding CompoundsD1763 - 00(2013)Standard Specification for Epoxy ResinsD3013 - 13Standard Specification for Epoxy Molding CompoundsD4350 - 13Standard Test Method for Corrosivity Index of Plastics and FillersD5948 - 05(2012)Standard Specification for Molding Compounds, Thermosetting

Folha2

Folha3