75
1 CURRICULUM VITAE ASSOC. PROF. DR. DZULKIFLI BIN AWANG DEPARTMENT OF TECHNICAL & ENGINEERING EDUCATION FACULTY OF EDUCATION UNIVERSITI TEKNOLOGI MALAYSIA KAMPUS SKUDAI 81310 SKUDAI NEGERI JOHOR DARUL TAKZIM TEL: 07- 5534367 (direct line)(h/p: 019-7502196) FAX: 07- 5534884 E/MAIL:[email protected] or [email protected] CONTENTS PAGE 1. Personal Data 2 2. Education and Degrees 2 3. Employment Experiences 2 4. Members of Societies 3 5. Managerial Post/ Additional Responsibilities 4 6. Committees 8 7. Teaching Responsibilities 13 8. Supervision of Thesis 19 9. Supervision of Students Activities 32 10. Assessment Role 34 11. Seminar and Courses Attended 40 12. Project and Research 54 13. Consultancy 57 14. Publications 58 15. Extra-curricular Activities 62 16. Honours and Awards 73

ASSOC. PROF. DR. DZULKIFLI BIN AWANG - … · Post: Assistant Lecturer Employer: Faculty of Mechanical Engineering, UTM Date: August 1983 – September 1985 Post: Part Time Lecturer

Embed Size (px)

Citation preview

Page 1: ASSOC. PROF. DR. DZULKIFLI BIN AWANG - … · Post: Assistant Lecturer Employer: Faculty of Mechanical Engineering, UTM Date: August 1983 – September 1985 Post: Part Time Lecturer

1

CURRICULUM VITAE

ASSOC. PROF. DR. DZULKIFLI BIN AWANG DEPARTMENT OF TECHNICAL & ENGINEERING EDUCATION FACULTY OF EDUCATION UNIVERSITI TEKNOLOGI MALAYSIA KAMPUS SKUDAI 81310 SKUDAI NEGERI JOHOR DARUL TAKZIM TEL: 07- 5534367 (direct line)(h/p: 019-7502196) FAX: 07- 5534884 E/MAIL:[email protected] or [email protected]

CONTENTS PAGE

1. Personal Data 2

2. Education and Degrees 2

3. Employment Experiences 2

4. Members of Societies 3

5. Managerial Post/ Additional Responsibilities 4

6. Committees 8

7. Teaching Responsibilities 13

8. Supervision of Thesis 19

9. Supervision of Students Activities 32

10. Assessment Role 34

11. Seminar and Courses Attended 40

12. Project and Research 54

13. Consultancy 57

14. Publications 58

15. Extra-curricular Activities 62

16. Honours and Awards 73

Page 2: ASSOC. PROF. DR. DZULKIFLI BIN AWANG - … · Post: Assistant Lecturer Employer: Faculty of Mechanical Engineering, UTM Date: August 1983 – September 1985 Post: Part Time Lecturer

2

1. PERSONAL DATA

Name: Associate Prof. Dr. Dzulkilfi bin Awang

I/C Number: 570504-08-6675

Nationality: Malaysian

Date of Birth: 4th May 1957

Place of Birth: Kuala Kurau, Perak

Marital Status: Married

House Address: 29, Jalan Belibis 1. Taman Perling, 81200 Johor Bahru, JOHOR

2. EDUCATION AND DEGREES

Higher School Certificate (HSC - full Cert.), Kind Edward VII Secondary School,

Taiping, Perak (1978)

Bachelor of Design in Art & Design (Industrial Design) MARA Institute of Technology

(1983) Dissertation: Design & Safety of Children‟s Toys

Master of Arts (with Distinction) in Industrial Design (Engineering), Manchester

Polytechnic, Manchester, United Kingdom (1985) Thesis: A Mechanized Sprayer for

Tobacco Cultivation in Malaysia

Doctor of Philosophy in Industrial Design, The Manchester Metropolitan University,

Manchester, United Kingdom (1995) Thesis: The Potential Contribution of Industrial

Design to the Adaptation of Agricultural Machinery for use in Malaysia

3. EMPLOYMENT EXPERIENCES

Post: Temporary Teacher (academic)

Employer: Sekolah Menengah Agama Al-Falah, Parit Tok Ngah, Tanjung Piandang,

Perak.

Date: June 1978 – June 1979

Post: Design Trainee

Employer: Matshusita Electric Company, Shah Alam, Selangor

Date: May- July 1982

Page 3: ASSOC. PROF. DR. DZULKIFLI BIN AWANG - … · Post: Assistant Lecturer Employer: Faculty of Mechanical Engineering, UTM Date: August 1983 – September 1985 Post: Part Time Lecturer

3

Post: Assistant Lecturer

Employer: Faculty of Mechanical Engineering, UTM

Date: August 1983 – September 1985

Post: Part Time Lecturer

Employer: MARA Institute of Technology, Shah Alam

Date: July 1987 –June 1989

Post: Lecturer

Employer: Faculty of Mechanical Engineering, UTM

Date: October 1985 – April 1995

Post: Senior Lecturer

Employer: Faculty of Mechanical Engineering, UTM

Date: May 1995 – March 1999

Post: Associate Professor

Employer: Faculty of Mechanical Engineering, UTM

Date: April 1999 – Present

Post: Head of Design Department

Employer: Faculty of Mechanical Engineering, UTM

Date: January 2001-March 2007

Post: Head of Industrial Design Panel

Employer: Faculty of Mechanical Engineering, UTM

Date: March 2007- 2009

Post: Associate Professor

Employer: Faculty of Education, UTM

Date: August 2010 - Present

4. MEMBERS OF SOCIETIES

A. PROFESSIONAL

Malaysian Invention and Design Society (MINDS) - Member

South East Asean Ergonomics Society (SEAES) - Member

Society of Industrial Art & Design (SIAD), United Kingdom - Member

Page 4: ASSOC. PROF. DR. DZULKIFLI BIN AWANG - … · Post: Assistant Lecturer Employer: Faculty of Mechanical Engineering, UTM Date: August 1983 – September 1985 Post: Part Time Lecturer

4

Malaysia Design Society (Majlis Rekabentuk Malaysia) - Member

B. NON-PROFESSIONAL

Methodist Secondary School Ex-Student Association - Member

Universiti Teknologi MARA Alumni - Member

Universiti Teknologi Malaysia Academic Staff Association – Member

Malaysian Banjar Association – Live member.

5. MANAGERIAL POST/ADDITIONAL RESPONSIBILITIES

5.1 Managerial

a) Post : Head of Design Panel

Date : July 1987 – Jun 1988

b) Post : Co-ordinator for industrial Design (SJJ 3512) subject

Date : July 1990 May 1991

c) Post : Co-ordinator for Product Design (SMM 5523) Subject

Date : July 1996 – May 1997

d) Post : Co-ordinator for Industrial Design Subject (SMJ 2513) subject

Date : July 1996 – May 2001

e) Post : Committee for the establishment of New Course – Bachelor of Science

Industrial Design

Date : May 1995 – April 1997

f) Post : Committee for the establishment of New Course – Automotive

Engineering

Date : July 1996 – May 1997

g) Post : Co-ordinator for Bachelor of Science - Industrial Design Course.

Date : May 1997 – Present

h) Post : Co-ordinator for Industrial Design subjects (SMJ 2513)

Date : May 1998 – Present

Page 5: ASSOC. PROF. DR. DZULKIFLI BIN AWANG - … · Post: Assistant Lecturer Employer: Faculty of Mechanical Engineering, UTM Date: August 1983 – September 1985 Post: Part Time Lecturer

5

i) Post : Project Leader – Design and Fabrication of a Super-kart F1 Group

Date : August 1996 – August 1998

j) Post : Project Leader - Design and Fabrication of a Mobile Field Kitchen

Date : March 1998 – March 1999

k) Post : Project Leader – Design and Fabrication of a Catamaran Sailing Boat

Date : March 1998 – March 1998

l) Post : Head of Industrial Design Area/Specialisation

Date : Jan 1999 – Jan 2001

m)Post : Acting Head of Department, Dept. of Design, FME

Date : 6th – 7th May 1999

n) Post : Acting Head of Department, Dept. of Design, FME

Date : 16th – 18th June 1999

o) Post : Acting Head of Department, Dept. of Design, FME

Date : 23rd – 28th August 1999

p) Post : Acting Head of Department, Dept. of Design, FME

Date : 22nd May – 10th June 2000

q) Post : Acting Head of Department, Dept. of Design, FME

Date : 6th - 10th November 2000

r) Post : Acting Head of Department, Dept. of Design, FME

Date : 28th - 29th November 2000

s) Post : Head of Department, Dept. of Design, FME

Date : 1st January 2001 - 31 March 2007

t) Post : Head of Industrial Design Panel

Date : 1 April 2007 – July 2010

5.2 Advisor of Studies

a) Post : Advisor of Studies 1st Year Diploma of Mechanical Engineering

Date : 1983 – 1984

b) Post : Advisor of Studies 1st Year Diploma of mechanical Engineering

Date : 1986 – 1987

Page 6: ASSOC. PROF. DR. DZULKIFLI BIN AWANG - … · Post: Assistant Lecturer Employer: Faculty of Mechanical Engineering, UTM Date: August 1983 – September 1985 Post: Part Time Lecturer

6

c) Post : Advisor of Studies 2nd Year Diploma of Mechanical Engineering

Date : 1987 – 1988

d) Post : Advisor of Studies 3rd Year Diploma of Mechanical Engineering

Date : 1986 – 1987

e) Post : Advisor of Studies 1st Degree of Mechanical Engineering

Date : 1987 – 1988

f) Post : Advisor of Studies 2nd Year Degree of Mechanical Engineering

Date : 1988 - 1989

g) Post : Advisor of Studies 3rd Year Degree of Mechanical Engineering

Date : 1989 – 1990

h) Post : Advisor of Studies 4th Year Degree of Mechanical Engineering

Date : 1990 – 1991

i) Post : Advisor of Studies 2nd Year Degree of Mechanical Engineering

Date : 1995 - 1996

j) Post : Advisor of Studies 3rd Year Degree of Mechanical Engineering

Date : 1997 - 1998

k) Post : Advisor of Studies 4th Year Degree of Mechanical Engineering

Date : 1998 – 1999

l) Post : Advisor of Studies 5th Year Degree of Mechanical Engineering

Date : 1999 – Present

m) Post : Advisor of Studies 1st year Degree of Bachelor of Science

Industrial Design

Date : 1999/2000

o) Post : Advisor of Studies 2nd year Degree of Bachelor of Science Industrial

Design

Date : 2000/2001

p) Post : Advisor of Studies 3rd year Degree of Bachelor of Science Industrial

Design

Date : 2001/2002

q) Post : Advisor of Studies 4th

year Degree of Bachelor of Science Industrial

Design

Date : 2002/2003/2004/2005

Page 7: ASSOC. PROF. DR. DZULKIFLI BIN AWANG - … · Post: Assistant Lecturer Employer: Faculty of Mechanical Engineering, UTM Date: August 1983 – September 1985 Post: Part Time Lecturer

7

r) Post : Advisor of Studies 1st year Degree of Bachelor of Science

Industrial Design

Date : 2005/2006

s) Post : Advisor of Studies 2nd year Degree of Bachelor of Science

Industrial Design

Date : 2006/2007

t) Post : Advisor of Studies 3rd year Degree of Bachelor of Science

Industrial Design

Date : 2007/2008

u) Post : Advisor of Studies 4th year Degree of Bachelor of Science

Industrial Design

Date : 2008/2009

Advisory Outside UTM

a) Post : Design Project Advisor 3rd Year Diploma in Art & Design, Faculty of

Art & Design, Universiti Teknologi MARA, Shah Alam (Industrial

Design)

Date : 1987 – 1989

b) Post : Program Advisor for Diploma Industrial Design - Kolej Agama Sultan

Zainal Abidin (KUSZA), Kuala Terengganu, Terengganu.

Date : 1999 – 2003

c) Post : External Panel Advisor Bachelor of Education (Computer Aided Design

Technology) Universiti Pendidikan Sultan Idris (UPSI)

Date : 2003 – 2004

d) Post : Program Advisor for Bachelor of Arts Industrial Design – Universiti

Sultan Zainal Abidin (UNISZA), Kuala Terengganu, Terengganu.

Date : 2004 - Present

e) Post : Program Advisor for Diploma Industrial Design – Southern College,

Johor Bahru, Johor

Date : 2006 – 2011

f) Post : Program Advisor for Bachelor of Engineering Technology (Industrial

Design) – University of Kuala Lumpur (UniKL),

Date : 2007 - Present

g) Post : Program Advisor for Diploma Industrial Design – Southern

Page 8: ASSOC. PROF. DR. DZULKIFLI BIN AWANG - … · Post: Assistant Lecturer Employer: Faculty of Mechanical Engineering, UTM Date: August 1983 – September 1985 Post: Part Time Lecturer

8

College University, Johor Bahru, Johor

Date : 2012 - Present

6. COMMITTEES

1) Committee : Chairman, Faculty of Mechanical Engineering Manual, UTM

Date : 1987 – 1991

2) Committee : Thesis Panel, FME, UTM

Date : 1989 – 1991

3) Committee : FME/UTM Open Day

Date : 1987 – 1991

4) Committee : Out-campus Course SPACE – Co-ordinator for Industrial Design

Subject, UTM

Date : 1995 – Present

5) Committee : FME, UTM Family Day

Date : 1995

6) Committee : Co-ordinator, Rakan Rekacipta Workshop in conjunction with the

Launching of Rakan Muda/Rakan Rekacipta Johor State Level at UTM.

Date : 1996

7) Committee : Sub-committee for co-ordinating Advanced Education in Mechanical

Engineering, FME, UTM

Date : (1996 – 1997)

8) Committee : In-house Project Exco, Automotive & Aeronautical Research Group,

UTM

Date : (1995 – 1996)

9) Committee : Establishment of New Course – Bachelor of Science Industrial Design

in UTM

Date : (1995 – 1996)

10) Committee: Co-curriculum UTM – Faculty‟s Representative

Date : 1996 – Present

11) Committee: Establishment of New Course – Specialization in Automotive

Technology,

Page 9: ASSOC. PROF. DR. DZULKIFLI BIN AWANG - … · Post: Assistant Lecturer Employer: Faculty of Mechanical Engineering, UTM Date: August 1983 – September 1985 Post: Part Time Lecturer

9

UTM

Date : 1997

12) Committee: Facilitator - Skim Latihan Akademik Bumiputra (SLAB) /UTM Course

Date : 1997

13) Committee: UTM Shooting Competition in Conjunction with UTM‟s 25th

celebration.

Date : 1997

14) Committee: Facilitator – Seminar & Workshop on Rakan Muda, Johor at

UTM.

Date : 1997

15) Committee: Vehicle Relocation FME, UTM

Date : (Appointment 1998 – 2000)

16) Committee: Member - Manufacturing Focus Group

Date : 1998 – present

17) Committee: Academic Board FME, UTM

Date : (Appointment Jan 1999 – present)

18) Committee: Colloquium Committee – Mech. Eng Faculty

Date : (Appointment 1st May 2000 - 1st May 2002)

19) Committee: Academic Coordinator FME, UTM

Date : (Appointment 23rd May 2000 - present)

20) Committee: Design Seminar Committee Member (Paper review Committee)

Date : (Appointment Jan 2000- Jan 2001)

21) Committee: Member - Faculty of Mechanical Engineering Welfare Board

Date : (Joint from Jan 2000)

22) Committee: Sultanah Zanariah Library's Customer Focus Group

Date : (Appointment September 2000)

23) Committee: Industrial Training Committee, FME

Date : (Appointment January 2000 – December 2003)

23) Committee: Committee Member - Post Graduate Study

Date : (Appointment January 2001 – December 2002)

24) Committee: Committee Member – FME Human Resources Development

Date : (Appointment January 2001 – December 2002)

Page 10: ASSOC. PROF. DR. DZULKIFLI BIN AWANG - … · Post: Assistant Lecturer Employer: Faculty of Mechanical Engineering, UTM Date: August 1983 – September 1985 Post: Part Time Lecturer

10

25) Committee: Administration Committee, FME.

Date : (Appointment January 2001- January 2007)

26) Committee : Research Coordinating Committee, FME

Date : (Appointed January 2002)

27) Committee: Relocation Committee, FME

Date : (Appointed August 2002)

28) Committee: ISO 9000 (2000) Implementation Committee, FME

Date : (Appointed October 2002 – May 2003)

29) Committee: ISO 9000 (2000) Implementation Committee, FME

Date : (Appointed May 2003 – April 2005)

30) Committee: Quality Assurance Implementation Committee, FME

Date : (Appointed June 2003 – May 2005)

31) Committee: Teaching & Learning Assessment Reviewing Committee, UTM

Date : (Appointed March 2008 – December 2008)

32) Committee : Post-Graduate Studies Committee, FME

Date : (1st April 2009 - 31

st March 2011)

Committees Outside UTM

1) Committee : Industrial Design Glossaries, Dewan Bahasa & Pustaka, Kuala Lumpur

Date : (1989-1991)

2) Committee : Cultural & Arts Informations Network System (CAINS), ITM, Shah

Alam

Date : 1997 – Present

3) Committee : Questions Drafter – Machine Drawing for HSC, Examination , Malaysia

Examination Council, Ministry of Education

Date : 1989

4) Committee : Malaysian Community of Cheetham Hill (MCCH), Cheetham Hill,

Manchester

Date : (1993-1994)

5) Committee : Technical Committee for Surau Building, Surau Jalan Belibis-Undan,

Taman Perling, Johor bahru.

Page 11: ASSOC. PROF. DR. DZULKIFLI BIN AWANG - … · Post: Assistant Lecturer Employer: Faculty of Mechanical Engineering, UTM Date: August 1983 – September 1985 Post: Part Time Lecturer

11

Date : (June 1999-July 2005)

6) Committee : Parents and Teachers Association, Seri Perling Secondary School.

Date : (April 1999 - April 2000)

7) Committee : Committee for Surau Building, Seri Perling Secondary School.

Date : (June 1999)

8) Committee : Exhibition Sub-Committee for Science & Technology Week JOHOR.

Date : (July-Sept 1999)

9) Committee : Secretariat Rakan Muda/ Rakan Rakan Reka Cipta JOHOR

Date : (March-Dec 1999)

10) Committee: Parents and Teachers Association, Seri Perling Secondary School.

Date : (April 2000 - April 2001)

11) Committee: Parents and Teachers Association, Taman Perling Primary School.

Date : (May 2000 - April 2001)

12) Committee: Curriculum Advisory Committee for Kolej Ugama Sultan Zainal Abidin

(KUSZA), Kuala Terengganu, Terengganu.

Date : (1999 – present)

13) Committee: Judging Panel for Malaysia Good Design Mark, Malaysia Design

Council, Ministry of Science and Environment.

Date : (1999, 2000, 2001, 2002, 2003)

14) Committee: Life Member - Malaysia Banjar Organisation

Date : (from Dec 1999 - present)

15) Committee: Ad-hoc Committee for JPA Diploma in Industrial Design‟s Recognition,

Johor Bahru Polytechnic,

Date : (August 2001)

16) Committee: Parents and Teachers Association, Seri Perling Secondary School.

Date : (April 2002 - April 2003)

17) Committee: Parents and Teachers Association, Taman Perling Primary School.

Date : (May 2002 - April 2003)

18) Committee: Ad-hoc Committee for JPA‟s Bachelor Degree in Industrial Design‟s

Recognition, Universiti Putra Malaysia, Serdang, Selangor

Date : (September 2002)

19) Committee: Chairman – Ministry of Education Text Book Quality Control

Page 12: ASSOC. PROF. DR. DZULKIFLI BIN AWANG - … · Post: Assistant Lecturer Employer: Faculty of Mechanical Engineering, UTM Date: August 1983 – September 1985 Post: Part Time Lecturer

12

Committee

Date : (April 2002 – May 2003)

20) Committee: Board of Accreditation Malaysia

Date : (Appointed May 2003 until now)

21) Committee: Chairman - Parents and Teachers Association, Seri Perling Secondary

School.

Date : (May 2003 - June 2004)

22) Committee: Academic Bureau - Parents and Teachers Association, Taman

Perling Primary School.

Date : (June 2003 - May 2004)

23) Committee: Chairman - Parents and Teachers Association, Seri Perling Secondary

School.

Date : (June 2004 - May 2005)

24) Committee: Board Member –Programme Evaluation for Degree in Industrial Design

Kolej Ugama Sultan Zainal Abidin, Kuala Terengganu.

Date : 18th

July 2004 (appointed)

25) Committee: Vice-Chairman - Parents and Teachers Association, Seri Perling

Secondary School.

Date : (June 2005 - May 2006)

26) Committee: Motivation Bureau - Parents and Teachers Association, Taman

Perling Primary School.

Date : (June 2005 - May 2006)

27) Committee : Surau Al-Khautsar Management Committee, Taman perling, Johor

Bahru, Johor.

Date : (August 2005-July 2007)

28) Committee : Advisory Committee Rakan Muda - Rakan Reka Cipta, Student Affairs,

UTM

Date : (August 2005 – July 2007)

28) Committee: Curriculum Advisory Committee for Industrial Design Degree Course,

Universiti Putra Malaysia, Serdang, Selangor.

Date : (September 2005 – present)

29) Committee: Curriculum Advisory Committee for Industrial Design Degree Course,

Universiti Darul Iman Malaysia, Terengganu.

Date : (January 2006 – present)

Page 13: ASSOC. PROF. DR. DZULKIFLI BIN AWANG - … · Post: Assistant Lecturer Employer: Faculty of Mechanical Engineering, UTM Date: August 1983 – September 1985 Post: Part Time Lecturer

13

30) Committee: Curriculum Advisory Committee for Industrial Design Degree Course,

Universiti Kuala Lumpur (UniKL), Federal Territory.

Date : (March 2006 – present)

31) Committee : Curriculum Evaluation Committee for Diploma Industrial Design

Programme, Southern College, Johor Bahru, Johor.

Date : (December 2008 - present)

32) Committee: Students‟ Integration for Unity, Secondary School Cluster (Perling Johor

Bahru Zone, JOHOR)

Date : (January 2011- December 2012)

Committee : Evaluation & Examination Committee, Department of Technical &

Engineering Education Faculty of Education, UTM.

Date : (January 2012 – present)

Committee : Chairman – Consultation Committee, Department of Technical &

Engineering Education Faculty of Education, UTM.

Date : (January 2012 - present)

Committee : Head – Invention Studio laboratory, Department of Technical &

Engineering Education Faculty of Education, UTM.

Date : (January 2012 - present)

Committee : External Relation, Industry & Society Committee, Department of

Technical & Engineering Education Faculty of Education, UTM.

Date : (January 2012 - present)

Committee : Task Force UTM Brand Pedagogy, Faculty of Education, UTM

Date : (January 2012 – present)

7. TEACHING RESPONSIBILITIES

Course Name - Industrial Design

Programme : 1st Year, 2nd Year and 3rd Year B.Sc Mechanical Engineering

Year : 1983, 1984, 1986, 1987, 1988, 1989

Content : Introduction to Industrial Design, Definition, Design Process, Concept

Generation, Sketches, Engineering Drawing, Model Making, Experimental

Construction, Project Presentation.

Course Name - Design I

Programme : 2nd Year B.Sc Mechanical Engineering

Year : 1995, 1996, 1997

Page 14: ASSOC. PROF. DR. DZULKIFLI BIN AWANG - … · Post: Assistant Lecturer Employer: Faculty of Mechanical Engineering, UTM Date: August 1983 – September 1985 Post: Part Time Lecturer

14

Content : Introduction to Industrial Design, Definition, Design Process, Product

Planning, Market Survey, Concept Generations, Sketches, QFD,

Ergonomics, Engineering Drawing, Production Techniques, Project

Presentation.

Course Name - Design II

Programme : 3rd Year B.Sc Mechanical Engineering

Year : 1995, 1996, 1997, 1998

Content : Product Planning, Market Survey, Concept Generations, Sketches, QFD,

Concurrent Design, Ergonomics, Production Techniques, Product Costing,

Engineering Drawing, Project Presentation.

Course Name - Introduction To Design

Programme : 2nd Year B.Sc Mechanical Engineering (4 years course)

Year : 1996, 1997, 1998

Content : Introduction to Industrial Design, Definition, Design Process, Product

Planning, Market Survey, Concept Generations, Sketches, QFD,

Ergonomics, Engineering Drawing, Production Techniques, Project

Presentation.

Course Name - Engineering Drawing

Programme : 1st Year B.Sc Mechanical Engineering

Year : 1983, 1984, 1986, 1987, 1988, 1989

Content : Techniques of Writing and Drawing lines, Geometry Drawings, First and

Third Angle Projection, Isometrics, True lengths and Shapes,

Intersections, Development of Surfaces, Sectional Drawing, Assembly

Drawing, Detail Drawing.

Course Name - Engineering Drawing

Programme : 1st Year Diploma Mechanical Engineering

Year : 1983, 1984, 1986, 1987, 1988, 1989

Content : Techniques of Writing and Drawing lines, Geometry Drawing, First and

Third Angle Projection, Isometrics, True lengths and Shapes,

Intersections, Development of Surfaces, Sectional Drawing, Assembly

Drawing, Detail Drawing

Course Name - Engineering Drawing

Programme : 1st Year B.Sc Electrical Engineering (Service Subject to Elect. Eng.

Faculty)

Year : 1986, 1987, 1988, 1989, 1996, 1997

Content : Techniques of Writing and Drawing lines, Geometry Drawings, First and

Third Angle Projection, Isometrics, Sectional Drawing, Assembly

Drawing, Detail Drawing.

Page 15: ASSOC. PROF. DR. DZULKIFLI BIN AWANG - … · Post: Assistant Lecturer Employer: Faculty of Mechanical Engineering, UTM Date: August 1983 – September 1985 Post: Part Time Lecturer

15

Course Name - Engineering Drawing

Programme : 2nd Year B.Sc Human Resources Management and Development

Year : 1996, 1997

Content : Techniques of Writing and Drawing lines, Geometry Drawings, First and

Third Angle Projection, Isometrics, Sectional Drawing, Assembly

Drawing

Course Name - Product Design/System Design

Programme : 5th Year B.Sc Mechanical Engineering

Year : 1995, 1996, 1997, 1998

Content : Written and Verbal Presentation Skill, Data Gathering Methods, Design

Processes, Problem Solving Techniques & Process, Production

Engineering Drawing, Material Selections, Design Production Quality,

Optional Design Topics.

Course Name - Metrology Laboratory

Programme : 2nd Year B.Sc Mechanical Engineering

Year : 1986, 1987

Content : Introduction to Metrology, Measuring Tools Machines, Surface

Roughness, Geometrical Accuracy

Course Name - Industrial Design 01 (SRI 1014)

Programme : 1st Year B.Sc Industrial Design

Year : 1997

Content : Intoduction to Design, Elements of Design, Principles of Design

Course Name - Industrial Design 02 (SRI 1024)

Programme : 1st Year B.Sc Industrial Design

Year : 1998

Content : Design Visualisation, Sketching, Rendering and Visual Presentation

Course Name - Industrial Design 03 (SRI 2014)

Programme : 2nd Year B.Sc Industrial Design

Year : 1999 - 2000

Content : Design Visualisation, Sketching, Rendering and Visual Presentation,

Design Process, Model Making.

Course Name - Industrial Design 04 (SRI 2024)

Programme : 2nd Year B.Sc Industrial Design

Year : 1999, 2000, 2001

Content : Design Research, Product Specification, Design Development, Design

Visualisation, Sketching, Rendering /Visual Presentation, Design

Process, and Model Making.

Course Name - Industrial Design 07 (SRI 4014)

Programme : 4th Year B.Sc Industrial Design

Page 16: ASSOC. PROF. DR. DZULKIFLI BIN AWANG - … · Post: Assistant Lecturer Employer: Faculty of Mechanical Engineering, UTM Date: August 1983 – September 1985 Post: Part Time Lecturer

16

Year : 2002/2003

Content : Research Methodology, Product Specification, Design Development,

Design Visualisation, Sketching, Rendering /Visual Presentation, Design

Process, and Model Making.

Course Name - Design Engineering (MMJ 2513)

Programme : 1st Year Master of Science in Engineering

Year : 2001

Content : Design Process, Ergonomics, Design Methodology, Engineering

Analyses.

Course Name - Industrial Design 08 (SRI 4025)

Programme : 4th Year B.Sc Industrial Design

Year : 2002/2003

Content : Research Methodology, Product Specification, Design Development,

Design Visualisation, Sketching, Rendering /Visual Presentation, Design

Process, Design for Manufacturing and Model/prototype Making.

Course Name - Workshop Practice (SRI 1062)

Programme :1st Year B.Sc Industrial Design

Year : 2004

Content : Introduction to wood working machines and hand tools. Model making

techniques using wood materials.

Course Name - Studio Presentation (SRI 1022)

Programme :1st Year B.Sc Industrial Design

Year : 2004-2005

Content : Media and techniques, Sketching, drawing, panel presentaion techniques,

verbal presentation, presentation folio and documentation.

Course Name - Sketching (SRI 1012)

Programme :1st Year B.Sc Industrial Design

Year : 2004-2005

Content : Material, media, surface and sketching techniques.

Course Name - Introduction to design (SMJ 3513)

Programme : 3rd Year B. Sc Mechanical Engineering

Year : 2001-2005

Content : Introduction to Industrial Design, Definition, Design Process, Product

Planning, Market Survey, Concept Generations, Sketches, QFD,

Ergonomics, Engineering Drawing, Production Techniques, Project

Presentation.

Course Name - Introduction to design (SME 2512)

Page 17: ASSOC. PROF. DR. DZULKIFLI BIN AWANG - … · Post: Assistant Lecturer Employer: Faculty of Mechanical Engineering, UTM Date: August 1983 – September 1985 Post: Part Time Lecturer

17

Programme : 2nd Year B.Sc Mechanical Engineering

Year : 2005 - 2007

Content : Introduction to Industrial Design, Definition, Design Process, Product

Planning, Concept Generations, Sketches, Creative techniques,

Ergonomics, Engineering Drawing, Project Presentation.

Course Name - Innovation Management & Product Development (SRI 4282)

Programme : 4th

year B.Sc Industrial Design

Year : 2007 - 2009

Content : Innovation Management, Intellectual Property, The Role of Technology

Transfer in Innovation, Product & Brand Strategy, New Product

Development (NPD), Managing NPD.

Course Name - Innovation Management & Product Development (SRI 2083)

Programme : 2nd year B.Sc Industrial Design

Year : 2008 - 2011

Content : Innovation Management, Intellectual Property, The Role of Technology

Transfer in Innovation, Product & Brand Strategy, New Product

Development (NPD), Managing NPD.

Course Name - Digital Photography (Elective Course – Third Year- SRI 3013)

Programme : 3rd year B.Sc Industrial Design

Year : 2009 – 2011

Content : History of photography, Photography equipment, Introduction to Digital

photography, technical aspects of a Camera, Lenses, Special techniques,

Lighting, Digital Imaging (picture into pixels, equipment for digital

imaging, editing digital images)

Course Name - Basic Invention (SPE 2032)

Programme : 2nd

year Bachelor of Technology with Education

Year : 2010, 2013

Content : This course is designed to expose students in designing process. It will

emphasize on the relationship between invention and designing,

principles of the invention concept and its development. Activities that

are conducted will give students the opportunity to highlight one's talent

and creativity in developing invention projects through modelling and

folio. At the end of the course, students should be able to discuss and

apply the theories and principle of product design in designing new

product.

Course Name - Industrial Design (SPE 2622)

Programme : 2nd

year Bachelor of Technology with Education

Year : 2010

Content : This course is design to expose students to the development of

consumer product design based on establish industrial design concept

especially appearances. It will emphasize on fundamental aspect of

design, related theories, development processes, project management,

Page 18: ASSOC. PROF. DR. DZULKIFLI BIN AWANG - … · Post: Assistant Lecturer Employer: Faculty of Mechanical Engineering, UTM Date: August 1983 – September 1985 Post: Part Time Lecturer

18

creativity, information gathering, documentation and presentation,

problem identification and solving, human factors, aesthetic value, and

introduction to basic material and related technologies.

Course Name - Invention (SPL 4403)

Programme : 4th

year Bachelor of Technology with Education

Year : 2011 - present

Content : This course is designed to expose the students in designing process. It

will emphasize on the situation that required design in solving problem,

information gathering regarding design, designing product by sketching

and drawing. Students will have opportunity to a process of developing a

product prototype starting from materials selection, product components

development, fitting, and finishing. The students also will have

opportunity to test and modify the prototype. At the end of the course,

students should be able to discuss and apply the theories and principle of

product design in designing new product.

Course Name - Basic Engineering Drawing (SPE 1002) –

Programme : 1st year Bachelor of Technology with Education

Year : 2011 – present

Content : This course, a foundation for any advanced engineering courses, gives

exposure to students with the basics of drawing methods in engineering

drawing. Emphasis will be given on the construction and interpretation of

geometrical drawing, lines, writing techniques and lettering,

dimensioning, orthographic projection, isometric drawing, oblique and

auxiliary view are the topic covered in this course. Upon completing

from this course, student should be able to use the manual technique

using drafting board and drawing instruments to produce complete

drawing based on well defined technical drawing standard/conventions.

Course Name - Engineering Drawing 1 (SPE 1022) –

Programme : 1st year Bachelor of Technology with Education

Year : 2012 - present

Content : This course is the continuation of the Basic Engineering Course (SPE

1002). Students will be taught in the various topics of geometrical

constructions namely Development, Perspective Drawing, and Sectional

Drawing. Students will also learn the application of engineering drawings

in the real-life context such as in the area of architecture, electrical and

electronic engineering, mechanical engineering and piping systems.

Course Name - Basic Innovation and Product Management (SPL4402)

Programme : 4th year Bachelor of Technology with Education

Year : 2013 - present

Page 19: ASSOC. PROF. DR. DZULKIFLI BIN AWANG - … · Post: Assistant Lecturer Employer: Faculty of Mechanical Engineering, UTM Date: August 1983 – September 1985 Post: Part Time Lecturer

19

Content : The course will present the principles of product development and

innovation and its application in the industry, innovation in the context of

strategic management and leadership, total quality management as

innovation strategy, product development process, innovation models

and processes, product innovation management, innovation strategies and

product life cycle. The course will give the students an opportunity to

expand their knowledge through individual and group tasks focusing on

product development and innovation. Their critical thinking abilities will

also be honed through guided discussions and synthesis of learning.

8. SUPERVISION OF THESIS

A. Bachelor of Mechanical Engineering

1) Student :Abdul Wahab bin Jaafar

Title : Design of a Pesticide Sprayer for Tobacco Cultivation

Year : 1990 - 1991

2) Student : Mohamed Ibrahim bin Ismail

Title : Oil Palm Fresh Fruit Bunch (FFB) Loose Fruits Collector Design

Year : 1995 – 1996

3) Student : Mohd. Saleh bin Sahri

Title : Design of a Mobile Field Kitchen

Year : 1995 – 1996

4) Student : Arif Kamal bin Yarudin

Title : Design of a Cross-kart

Year : 1995 – 1996

5) Student : Capt. Muhamad bin Abu Kassim

Title : Design of a Zeroing Deviced for Rifle M16 and Steyr AUG.

Year : 1995 – 1996

6) Student : Noor Azman bin Omar

Title : Development of a Low-powered Transporter

Year : 1996 – 1997

7) Student : Tan Soon Chiang

Title : Cub Prix Motorbike Design

Year : 1996 – 1997

Page 20: ASSOC. PROF. DR. DZULKIFLI BIN AWANG - … · Post: Assistant Lecturer Employer: Faculty of Mechanical Engineering, UTM Date: August 1983 – September 1985 Post: Part Time Lecturer

20

8) Student : Lt. Comd. Norhayalim bin Abd. Aziz

Title : Portable Catamaran Sailing Boat Design

Year : 1996 – 1997

9) Student : Ismi Haidar bin Othman

Title : Cub Prix Motorbike Design Development (scope: Chassis, fairing,

Engine support design)

Year : 1996 – 1997

10) Student : Mohd Shahriman bin Sallehuddin

Title : Cub Prix Motorbike Design Development (Scope: Fairing design, fork,

trailing - arm design)

Year : 1996 – 1997

11) Student : Mohd Zamri bin Othman

Title : Fibre-glass Racing Boat Design

Year : 1997 – 1998

12) Student : Zahrin bin Zain

Title : Design of a Super-kart F1 (Scope: Fairing, Steering, Brake system)

Year : 1997 –1998

13) Student : Noradnan bin Masoud

Title : Design of a Super-kart F1 (Scope: Chassis, Engine Mounting,

Transmission)

Year : 1997 – 1998

14) Student : Mej. Tofrowaih bin Hj. Mat Amin

Title : Design of a Powered Target for Army Rifle Range

Year : 1997 – 1998

15) Student : Mohd Nizam bin Mohd Noor

Title : Design of a Trailer for Carrying an Assault Boat

Year : 1997 – 1998

16) Student : Yusoff Awang Damit

Title : Human-powered Water Vehicle

Year : 1998 – 1999

17) Student : Lt. Afanizam bin Ali

Title : Design of a Zeroing Device for Browning and Heckler & Koch Pistols.

Year : 1998 – 1999

18) Student : Lt. Adi Ashran bin Mohd Salleh

Title : Mobile Field Kitchen Design (Scope: Design Refinement and

Page 21: ASSOC. PROF. DR. DZULKIFLI BIN AWANG - … · Post: Assistant Lecturer Employer: Faculty of Mechanical Engineering, UTM Date: August 1983 – September 1985 Post: Part Time Lecturer

21

Fabrication)

Year : 1998 – 1999

19) Student : Zulkifli bin Yaacob (Co-supervision with Mr. Yahya Ramli)

Title : Hydraulics System Design for Moving Target

Year : 1998 - 1999

20) Student : Abdul Halim bin Mahat

(Co-supervision with Assoc. Prof. Dr. Wan Ali Wan Mat)

Title : Oil Palm Trunk Mulcher

Year : 1998 – 1999

21) Student : Muhamad Kahirul bin Abdul Hamid

(Co-supervision with Assoc. Prof. Dr. Wan Ali Wan Mat)

Title : Oil Palm Bunch Mulcher (A)

Year : 1998 – 1999

22) Student : Lokman bin Haji Hussin

(Co-supervision with Assoc. Prof. Dr. Wan Ali Wan Mat)

Title : Oil Palm Bunch Mulcher (B)

Year : 1998 –1999

23) Student : Mohd Tahir bin Shaharom

Title : Mobile Field Kitchen ( scope – components design and analyses)

Year : 1998 – 1999

24) Student : Khaizul Azman bin Kasa

Title : Solar Tricycle (scope – concept design)

Year : 1998 -1999

25) Student : Zakaria bin Ismail

Title : Design of an Electronic Target

Year : 1998 - 1999

26) Student : Navin Kumar A/L Channa Krishnan (ATMA)

Title : Design of a Military Combat Shovel

Year : 1998 – 1999

27) Student : Balvinder Singh A/L Jaktar Singh (ATMA)

Title : Helmet-cum-Ear Protector for Artilery Personnel

Year : 1998 – 1999

28) Student : Chia Wing Thye (ATMA)

Title : Mobile Field Toilet for Malaysia Arm Forces.

Year : !998 - 1999

Page 22: ASSOC. PROF. DR. DZULKIFLI BIN AWANG - … · Post: Assistant Lecturer Employer: Faculty of Mechanical Engineering, UTM Date: August 1983 – September 1985 Post: Part Time Lecturer

22

29) Student : Mohamed Fadzly bin Abdul Kadir (ATMA)

(Co-supervision with Mr. Mohd Yazid bin Yahya)

Title : Pontoon Bridge Design for Military Application

Year : 1998 – 1999

30) Student : Fadzly bin Fadzil (ATMA)

Title : Pentas Tabik Hormat Mudah-alih (saluting dice)

Year : 1999 - 2000

31) Student : Suresh A/L Subramaniam (ATMA)

Title : Steyr AUG Rifle Design Concept

Year : 1999 - 2000

32) Student : Mohamad Saiful bin Mohamad Rathy (ATMA)

Title : Disposable Field Toilet

Year : 1999 - 2000

33) Student : Norhisham bin Hassan (ATMA)

Title : Portable First Aid Kit

Year : 1999 - 2000

34) Student : Hasmawi bin Abdullah Hashim (ATMA)

Title : Combat Cross-bow for Army Special Forces

Year : 1999 - 2000

35) Student : Khairul Amir bin Mohd Yusuff

Title : Rekabentuk Super-kart CVT

(Co-supervision with Dr. Kamarul Baharin Tawi)

Year : 1999 - 2000

36) Student : Mohd Firdaus bin Che Sab (SPACE - Kulim Hi-Tech)

Title : Super-kart Formula-1 (Scope: Fairing)

Year : 1999 - 2000

37) Student : Koay Heng Kia (SPACE - Kulim Hi-Tech)

Title : Human-Powered Water Recreational Vehicle - Basikal Air

Year : 1999 - 2000

38) Student : Mohd Sufian bin Mamat

Title : Mobile Field Kitchen (scope: component design)

Year : 1999-2000

39) Student : Norazlan bin Abdul Kadir

Title : Design of a Combat Tent

Year : 1999/2000

Page 23: ASSOC. PROF. DR. DZULKIFLI BIN AWANG - … · Post: Assistant Lecturer Employer: Faculty of Mechanical Engineering, UTM Date: August 1983 – September 1985 Post: Part Time Lecturer

23

40) Student : Hasrul Abu Hasan

Title : Design of an NGV Motorcycle

Year : 1999/2000

41) Student : Safarudin bin Jemain

Title : Design development of an Artilery Helmet-cum-Ear Protector

Year : 1999/2000

42) Student : Rosdi bin Baharin

Title : Design of an NGV Motorcycle.

Year : 1999/2000

43) Student : Rapizan bin Rahman

Title : Design of a Wheel Chair-cum Stretcher

Year : 1999/2000

44) Student : Zahrul bin Zakaria

Title : Electronic Dart Target Design Development

Year : 1999/2000

45) Student : Noor Azwaimi bi Mohamad Noor (ATMA)

Title : Design Development of a Zeroing device for M16 and Styr AUG

Year : 2000/2001

46) Student : Leong Cheng Sheung (ATMA)

Title : Design Development of a Combat Cross-bow for Army Special Forces.

Year : 2000/2001

47) Student : Wan Mohd Zulkhibri bin Wan Mohd Zain

Title : Design Development of a Catamaran Sailing Boat for ROTU, UTM

Year : 2000/2001

48) Student : Wong Chiew Yin

Title : Design Concept of a Tool for Fixing Concrete Steel Structure

Year : 2000/2001

49) Student : Asraffadel bin Ishak

Title : Design concept of a Safety Helmet for JPA3 Rescue Team

Year : 2000/2001

50) Student : Cheah Hun Lim

Title : Design Development of a Wheel Chair-cum-Stretcher

Year : 2000/2001

51) Student : Muhamad Ismanizam bin Isnin

Title : Design development of an NGV Cub Motorcycle

Page 24: ASSOC. PROF. DR. DZULKIFLI BIN AWANG - … · Post: Assistant Lecturer Employer: Faculty of Mechanical Engineering, UTM Date: August 1983 – September 1985 Post: Part Time Lecturer

24

Year : 2000/2001 (co-operation with FKKKSA, UTM)

52) Student : Mohd Aman bin Armawai (ATMA)

Title : M16 dan Styr AUG rack design

Year : 2000/2001

53) Student : Fakhrul Dahri bin Muhamed

Title : Design development of Super-kart F1 components

Year : 2000/2001

54) Student : Faizal Muhamad bin Nasir

Title : Design development of Super-kart F1 components

Year : 2000/2001

55) Student : Muhammed Azwan bin Ashaari

Title : To design a multi-purpose hospital bed

Year : 2000/2001

56) Student : Mohd Rizal bin Ehsa

Title : PALAPES‟s Field Kitchen components design development

Year : 2000/2001

57) Student : Mohd Zaidy bin Mohamad Nasir

Title : PALAPES UTM‟s Boat Trailer design development

Year : 2000/2001

58) Student : Mohd Nizam bin Zakaria

Title : To design a portable "Dehydration" unit

Year : 2000/2001

59) Student : Haryani bt. Md. Yunos

Title : Design development of a multi-purpose hospital bed

Year : 2001/2002

60) Student : Suraya bt. Sikas

Title : To design a mobile clinic

Year : 2001/2002

61) Student : Mazlan bin Abd Majid

Title : Design develoment of a Combat Cross Bow for Army Special Forces

Year : 2001/2002

62) Student : Leong Siew Lee

Title : To design a solar street light

Year : 2002/2003

Page 25: ASSOC. PROF. DR. DZULKIFLI BIN AWANG - … · Post: Assistant Lecturer Employer: Faculty of Mechanical Engineering, UTM Date: August 1983 – September 1985 Post: Part Time Lecturer

25

63) Student : Chong Ren Pian

Title : To design a solar decoration light for residential used

Year : 2002/2003

64) Student : Mohd Alfian bin Mohd Mustafa Azmi

Title : To design a portable flat tyre changing device

Year : 2002/2003

65) Student : Abby Hazrin bin Ibrahim

Title : To design a catamaran deck (for PALAPES (marine) UTM)

Year : 2002/2003

66) Student : Asmawati bt Mansor

Title : To design a continuous weighing and packing machine for food

industry

Year : 2002/2003

67) Student : Chan Yew May

Title : To study the role of Elements of Design to fulfill the needs of

ergonomics for industrial product.

Year : 2002/2003

68) Student : Tan Kuam Keng

Title : Design concept Styling of a Malaysia Mobile Home

Year : 2002/2003

69) Student : Teo Hwee Hong

Title : Design concept of a SWATH boat for tourist purposes.

Year : 2002/2003

70) Student : Nur Lukman bin Ahmad Suhaimi

Title : Design of a Multi-purpose Trailer Wagon.

Year : 2002/2003

71) Student : Halijah bt. Ibrahim

Title : Design/styling of a Malaysian MPV

Date : 2002/2003

72) Student : Ezwan Ekmal bin Khalid

Title : Concept Design of a Mini Power Boat

Date : 2002/2003

73) Student : Teo Pei Kian

Title : Concept and Styling of a Malaysian Motorhome

Date : 2002/2003

Page 26: ASSOC. PROF. DR. DZULKIFLI BIN AWANG - … · Post: Assistant Lecturer Employer: Faculty of Mechanical Engineering, UTM Date: August 1983 – September 1985 Post: Part Time Lecturer

26

74) Student : Zafrul Izzaq bin A. Aziz

Title : Study on the problem and design of a portable public toilet

Date : 2003/2004

75) Student : Lim Sook Choo

Title : A study of successful product design by Malaysian Product Designers

Date : 2003/2004

76) Student : Farihah binti Ismail

Title : To design a garbage collector for river.

Date : 2003/2004

77) Student : Tan Ee Fei

Title : The importance of Ergonomics for consumer products

Date : 2003/2004

78) Student : Wong Chis Sing

Title : Role and contributions of Industrial Designers in Automotive industry

Date : 2003/2004

79) Student : Yoong Fui Ni

Title : Role and importance of elements of design in furniture design

Date : 2003/2004

80) Student : Hii Ching Chyn

Title : The study on the application of electronic technology for consumer

products (electronic musical instrument)

Date : 2003/2004

81) Student : Mohamed Faizal bin Ahmad Puzi

Title : The Model making Process in Automotive industry with reference to

Proton

Date : 2003/2004

82) Student : Josiah Chong Wun Tzen

Title : The Role of Industrial Design in Product identification

Date : 2004/2005

83 Student : Zarini bt Zainal Abidin

Title : Colour study on children age 4-6 years old.

Date : 2004/2005

84) Student : Lim Yao Han

Title : Presentation Techniques in Industrial Design

Date : 2004/2005

85) Student : Sugeh Budee bin Qamaruzzaman

Page 27: ASSOC. PROF. DR. DZULKIFLI BIN AWANG - … · Post: Assistant Lecturer Employer: Faculty of Mechanical Engineering, UTM Date: August 1983 – September 1985 Post: Part Time Lecturer

27

Title : Ergonomics study and design of a computer table

Date : 2004/2005

86) Student : Neau Ker Sing

Title : Definition of Function and Aesthetics in Todays Industrial Products

Date : 2004/2005

87) Student : Saiful Bahari Ahmad

Title : Car Dashboard Design – A study

Date : 2004/2005

88) Student : Mohd Hafez bin Md. Noor

Title : Case Study on The Facilities Required in Running Industrial Design

Degree Course in Institution of Higher Learning in Malaysia.

Date : 2005/2006

89) Student : Mohd Hafiz bin Zaabar

Title : Case Study on Industrial Design Curricullum in Institution of Higher

Learning in Malaysia.

Date : 2005/2006

90) Student : Tay Jie Wen

Title : A Study on Elements of Design in Furniture Design.

Date : 2005/2006

91) Student : Gun Lek Seng

Title : A Case Study on Elements of Design in Mobile Phone Design.

Date : 2005/2006

92) Student : Amir Fadzli bin Abd Ghani

Title : The Role of Sketching and Drawing in Generating Creativity

Date : 2006/2007

93) Student : Norulhisyam bin Samsudin

Title : The Development in National Car Design.

Date : 2006/2007

94) Student : Mohd Rashdan bin Omar

Title : Study on Kelantan Top Design Development and Designing Product with

Top‟s Motive

Date : 2007/2008

95) Student : Mohd Khaidir bin Jusoh

Title : Design Development of Popular Sports Trophy in Malaysia

Date : 2007/2008

Page 28: ASSOC. PROF. DR. DZULKIFLI BIN AWANG - … · Post: Assistant Lecturer Employer: Faculty of Mechanical Engineering, UTM Date: August 1983 – September 1985 Post: Part Time Lecturer

28

96) Student : Muhamad Suhaimy bin Imran

Title : Design of a Multi-purpose Bed

Date : 2007/2008

97) Student : Nor Mohd Irshahrin bin Nordin

Title : To Study and Design of a Portable Public Toilet

Date : 2007/2008

98) Student : Mohd Ridhwan bin Zainal Abidin

Title : A Device to Collect Garbage in the River

Date : 2007/2008

99) Student : Law Jian Haw

Title : Case Study on the ID students at Institute of Higher Learning

Performance in Sketching.

Date : 2007/2008

100) Student : Wong Kah Fei

Title : Green Design- Designer Role & Responsibility

Date : 2008/2009

101) Student : Tan Lip Chong

Title : The Role & Importance of Elements of Design in Furniture Design

Date : 2008/2009

102) Student : Ng Way Gan

Title : The Study of Wood Shaping and Forming Technology in Furniture

Making

Date : 2008/2009

103) Student : Chia Lee Ping

Title : The Comparison of Surrealism and Funky on Product

Date : 2008/2009

104) Student : Lee Cheng Yee

Title : Study of Ergonomics on Control Interface Between Human and

Electronic Product

Date : 2008/2009

105) Student : Woo Kin Hee

Title : Permissible Design in Manufacturing Plastic Products

Date : 2008/2009

106) Student : Yasmin bt Musa

Title : The Elements of Design in Furniture

Date : 2008/2009

Page 29: ASSOC. PROF. DR. DZULKIFLI BIN AWANG - … · Post: Assistant Lecturer Employer: Faculty of Mechanical Engineering, UTM Date: August 1983 – September 1985 Post: Part Time Lecturer

29

107) Student : Khor Ling Shan

Title : Design Evolution of Concept Car

Date : 2008/2009

108) Student : Nasaruddin Shah bin Morani

Title : The Adaptation of Computer 3-Design Modelling for Industrial

Date : 2008/2009

109) Student : Mohamad Hafizuddin bin Zainal

Title : Ergonomics Problems Among Superbike Users

Date : 2009/2010

110) Student : Choo Fook Sin

Title : Design For a Better Tomorrow

Date : 2009/2010

111) Student : Khoo Sweed Ting

Title : Study of The Contribution of Design Elemnts to Fulfill the Ergonomics

of Sport Shoes

Date : 2009/2010

112) Student : Zainol Azuan bin Ab Rahim

Title : Rekabentuk Kereta Nasional Malaysia dari Perspektif Perekabentuk

Tempatan

Date : 2009/2010

113) Student : Mohamad Hafis bin Razali

Title : 3D Modelling As A Visualise Medum in Design

Date : 2009/2010

114) Student : Jacky Teoh

Title : Computer Aided Graphic In Design, Necessity Or Privellage

Date : 2009/2010

115) Student : Pee Nai Quan

Title : Branding Of Furniture

Date : 2009/2010

116) Student : Gan Syn Hong

Title : The Role Of Design Element To Satisfy Ergonomics Need For Car

Date : 2009/2010

117) Student : Chai Jun Dak

Title : Analysis Of The Sport Car Design

Date : 2009/2010

118) Student : Ong Ping Hwa

Page 30: ASSOC. PROF. DR. DZULKIFLI BIN AWANG - … · Post: Assistant Lecturer Employer: Faculty of Mechanical Engineering, UTM Date: August 1983 – September 1985 Post: Part Time Lecturer

30

Title : The Study On Interior Lighting Product

Date : 2009/2010

119) Student : Teoh Shi Xian

Title : Study Of Headphone, In-Ear Phone And Wireless Handfree

Date : 2009/2010

120) Student : Lee Shan Wen

Title : To Study Car Dashboard Design

Date : 2009/2010

121) Student : Tay Sinn Yee

Title : Composite Wood

Date : 2010/2011

122) Student : Nor Humairah Binti Hamdan

Title : Ergonomic Study In Primary School Bag

Date : 2010/2011

123) Student : Mohd Hafiz Bin Hamzah

Title : Peranan Dan Sumbangan Lakaran (Sketch) Dan Lukisan (Drawing)

Dalam Penjanaan Kreativiti

Date : 2010/2011

124) Student : Mohd Amirul Akram Bin Mahd Razan

Title : Kajian Kes-Persepsi Masyarakat Fkm Terhadap Pelajar Program Sri

Date : 2010/2011

125) Student : Ooi Shi Jia

Title : Design And Emotion

Date : 2010/2011

126) Student : Koh Tiam Siong

Title : Kajian Kes-Kemahiran Generik (Generic Skills) Di Kalangan Pelajar

Date : 2010/2011

127) Student : Umi Nurul Farahin Bnti Abdul Karim

Title : Pencapaian Kemahiran Generik Dalam Bidang Rekabentuk Industri

Date : 2010/2011

128) Student : Lee Huangshi

Title : To Study Tables And Chairs Design In An Education Environment

Date : 2010/2011

129) Student : Lim Beng Heng

Title : Ergonomics Study of Rugby Training Equipment

Date : 2010/2011

Page 31: ASSOC. PROF. DR. DZULKIFLI BIN AWANG - … · Post: Assistant Lecturer Employer: Faculty of Mechanical Engineering, UTM Date: August 1983 – September 1985 Post: Part Time Lecturer

31

B. Master of Engineering

1) Student : Yusri bin Yusof

Title : Product Design Cycle

Year : 1997 – 1999 (incomplete)

2) Student : Zakaria bin Ibrahim (co-supervised)

Title : An Examination of the Use of Cross-functional Teams/Concurent

Engineering in Design of a New Product

Year : 1998 – 1999 (withdrawn)

3) Student : Suhaimy bin Ahmad (co-supervised)

Title : Rekabentuk Konsep Penutup (Canopy) untuk motosikal

Year : 2001 – 2002 (completed his degree at Faculty of Education, UTM)

4) Student : Noor Azizah bt. Awang @ Shafie (Main Supervisor)

Title : Ergonomic Design for Hovercraft Interior

Year : November 2002

5) Student : Nor Azmin bin Md. Nor (co-supervised)

Title : A Study On Manual Handling (Mh) And Its Hazards Towards

Malaysian Palm Oil Harvesters

Year : June 2005

6) Student : Maisarah bt Azhar

Title : Eco Design in Packaging Industry

Year : 2008 – 2012 (completed

7) Student : Teo Pei Kian

Title : To Develop A Child Care Center Design in Malaysia

Year : 2009 – 2012 (completed)

8) Student : Wan Faizatul Atiqah bt Ismayatim

Title : Issues of Erhgonomics Hazard in Workplace: Manual Material Handling

in Agriculture

Year : 2010 – (withdrawn)

9) Student : Nurhidayah bt Sarkawi

Title : Proton Future Urban Mobilty Electric Vehicle Concept

Year : 2010 – present

10) Student : Norhelmy Lobb bin Sad Lobb

Title ; Design Trends of Eco Cars

Year : 2010 – present

Page 32: ASSOC. PROF. DR. DZULKIFLI BIN AWANG - … · Post: Assistant Lecturer Employer: Faculty of Mechanical Engineering, UTM Date: August 1983 – September 1985 Post: Part Time Lecturer

32

C. Doctor Of Philosophy

1) Student : Siew Chee Kwong

Title : Design Strategy of Common Interior Platform to Meet Requirement of

Budget Compact Car (Proton GSC) and Premium Compact car (Lotus

LCC) for Local & Inetrnational Market

Year : 2010 – 2012 (withdrawn)

2) Student : Azlan bin Othman

Title : Quantify Heptic Qualities for Real World Automotive Applications

Year : 2010 - present

3) Student : Zaidy bin Samsudin

Title : Automotive Design Trends Foreasting & Best Practice Methodology

Year : 2010 - present

4) Student : Nurul Ain binti Abdull Mutalib

Title : To be confirmed

Year : 2012 – present

5) Student : Rahmah binti Md Yusof

Title : To be confirmed

Year : 2012 - present

9. SUPERVISION OF STUDENTS ACTIVITIES

9.1 Training (In-campus training)

a) Project Title : Fabrication of a “cross-cart” Prototype

Duration : 6 weeks (May – June 1988)

No: of Students : 12 students

b) Project Title : Design Development and Fabrication of a “cross-cart” Prototype

Duration : 6 weeks (May – June 1989)

No: of Students : 8 students

c) Project Title : Design and Fabrication of a Go-cart

Duration : 6 weeks (May – June 1990)

No: of Students : 8 students

Page 33: ASSOC. PROF. DR. DZULKIFLI BIN AWANG - … · Post: Assistant Lecturer Employer: Faculty of Mechanical Engineering, UTM Date: August 1983 – September 1985 Post: Part Time Lecturer

33

9.2 Design Project Supervision for Malaysian Military Academy (Akademi Tentera

Malaysia (ATMA) Cadet:

Zeroing Aid for Rifle M16 and Styr AUG (1996)

Catamaran Sailing Boat for Navy Cadet‟s Training (1996)

Electronic Target for Malaysian Army Rifle Range (1997)

Zeroing Aid for Browning and HK 9PS Pistols (1998)

Trailer Type Field Kitchen (1998)

Portable Combat Shovel (1998)

Disposable Field Toilet (1998)

Mobile Field Toilet (1998)

Portable Saluting Dice (1998)

Styr AUG Concept Rifle for Malaysian Army (1999)

Combat Tent (1999)

Cross-bow for Malaysian Army Special Force (1999, 2000)

Electronic D.A.R.T. Target (1999, 2000)

Mobile Field Kitchen Components Design (2000).

Rifle Storage Rack for M16 Rifle dan Steyr A Rifle (2000)

Cross-bow Design Development for Malaysian Army Special Force (2001)

9.2 Supervision of Students Industrial Training (Out-campus Training)

1984: Kilang Peluru, Batu Arang, Selangor

1987: Suzuki Assembly, Prai, Penang; Hong Leong Shipyard, Prai, Penang

1988: Mattel Malaysia Private Limited, Seberang Prai; GEC, Kulim, Kedah

1989: Kilang Kelapa Sawit Jawi, Jawi, Seberang Prai; Kedah Sugar Refiney

Limited

1990: Motorola , Sg, Way, Petaling Jaya, BATA (M) Sdn. Bhd. Klang, Selangor

1991: Several factories in Sg. Way and Petaling Jaya.

1997: Robert Bosch (M) Sdn. Bhd, Bayan Lepas, Penang; Hewlett Packard (M)

Sdn.Bhd, Bayan Lepas, Penang; Siemens Semiconductors Sdn. Bhd, Bayan

Lepas, Penang; Intel Technology Sdn. Bhd, Bayan Lepas, Penang; Escoy

Smelting, Jalan Datuk Keramat, Penang

2002: GKY Machinery (M) Sdn. Bhd, Johor; Taichong Engineering & Steelworks

Sdn. Bhd.; Tanah Temasik Sdn. Bhd, Johor; Harta Consults Sdn. Bhd.

Johor; Pejabat Pengarah Kerja Raya Johor; Broadway Foam Sdn. Bhd.,

Johor, Plastrade Group of Companies, Johor; Volvo Malaysia Sdn. Bhd.

Johor; Oriental Assemblers Sdn. Bhd. Johor; Orcadesign Consultants Sdn.

Bhd. Johor.

Page 34: ASSOC. PROF. DR. DZULKIFLI BIN AWANG - … · Post: Assistant Lecturer Employer: Faculty of Mechanical Engineering, UTM Date: August 1983 – September 1985 Post: Part Time Lecturer

34

9.3 Organising/supervising Students Project/Activities:

1. Organised study visit to Industrial Design Department, Faculty of Art & Design ,

UiTM, Shah Alam ( July 1999)

2. Organised study visit to Industrial Design Department, Faculty of Art & Design ,

UiTM, Shah Alam and ITEX 2000 Exhibition at The Mines KL (Aug 2000)

3. Organised study visit to SWAN STABILLO factory at Tampoi, Johor Bahru (Mac

2001)

4. Co-Organiser SWAN STABILLO Ball-point Pen Design Competition ( Mac-May

2001)

5. Organised study visit to Bean Sprout Sdn. Bhd (for designing project on bean sprout

cleaning machine, separating machine and weighing & packing machine) (Nov 2001)

6. Organised study visit to PROTON Shah Alam for Industrial Design Degree students‟

(1st February 2002)

7. Organised “Industrial Design Night” held at Pulai Spring Resorts (2002,2003, 2004,

2005, 2006, 2007, 2008, 2009)

8. Organised “Industrial Design Saturday” held at Dewan Sultan Iskandar, UTM (2005)

9. Organised “Industrial Design Final Year Degree Show” (2001, 2002, 2003, 2004,

2005, 2006, 2007, 2008, 2009)

10. Organised Industrial Design Motivation Camp held at Sekakap Camp, Mersing (2005,

2006, 2007, 2008)

11. Organised “Industrial Design Saturday” held at Dewan Sultan Iskandar, UTM (2008)

10. ASSESSMENT ROLE

1. Examiner – STPM/HSC Art Paper (1988 – 1989)

2. External Examiner – Final Year Diploma Art & Design (Industrial Design), MARA

Institute of Technology, Shah Alam, Selangor ( 1987 – 1988)

3. Thesis External Examiner - Final Year Diploma Art & Design (Industrial Design),

MARA Institute of Technology, Shah Alam, Selangor ( 1987 – 1988)

4. Assessor – Article word entry “Tank” for Science and Technology Encyclopedia,

UTM/DBP (1996)

5. External Examiner – Final Year Bechelor of Design (B. Des) Art & Design

(Industrial Design), MARA Institute of Technology, Shah Alam, Selangor (Oct,

1998)

6. External Examiner – Final Year Bechelor of Design (B. Des) Art & Design

(Industrial Design), MARA Institute of Technology, Shah Alam, Selangor ( May,

Page 35: ASSOC. PROF. DR. DZULKIFLI BIN AWANG - … · Post: Assistant Lecturer Employer: Faculty of Mechanical Engineering, UTM Date: August 1983 – September 1985 Post: Part Time Lecturer

35

1999)

7. External Examiner – Final Year Bechelor of Design (B. Des) Art & Design

(Industrial Design), MARA Institute of Technology, Shah Alam, Selangor ( 3-4 Nov,

1999)

8. Internal Examiner - Master of Engineering (Mechanical) School of Post-Graduate

Studies, UTM, Kampus Skudai, Johor (Oct 1999) Candidate: Md. Afendi M.

Yusuf) (Title: The Study of Model Making Using Parafine Wax)

9. Judging Panel - Malaysia Good Design Mark, Malaysia Design Council, Menara Tan

& Tan, Jln Tun Razak, Kuala Lumpur. (18 Nov, 1999)

10. External Examiner – Final Year Bechelor of Design (B. Des) Art & Design

(Industrial Design), University Technology MARA (UiTM), Shah Alam, Selangor (

28-29 April, 2000)

11. Judging Panel - Malaysia Good Design Mark, Malaysia Design Council, Menara Tan

& Tan, Jln Tun Razak, Kuala Lumpur. (3rd August, 2000)

12. Judging panel - Design Project for Secondary School in conjunction with Kolej Tun

Hussien Onn Cultural Day "Eksvanitra" 2000, UTM. (12th August, 2000)

13. Judging Panel - Malaysia Good Design Mark, Malaysia Design Council, Menara Tan

& Tan, Jln Tun Razak, Kuala Lumpur. (19th September, 2000)

14. External Examiner – Final Year Bechelor of Design (B. Des) Art & Design

(Industrial Design), University Technology MARA (UiTM), Shah Alam, Selangor (

8-9 November, 2000)

15. External Examiner – Final Year Bechelor of Design (B. Des) Art & Design

(Industrial Design), University Technology MARA (UiTM), Shah Alam, Selangor (

19th – 20th April, 2001)

16. Judging Panel – Swan STABILLO Ball-point Pen Design Competition, Organiser by

Swan Stabillo (M) Sdn. Bhd, Kawasan Perindustrian Tampoi, Johor and Faculty of

Mechanical Engineering, UTM. (4th July 2001)

17. Judging Panel - Malaysia Good Design Mark, Malaysia Design Council, Menara Tan

& Tan, Jln Tun Razak, Kuala Lumpur. (21st August, 2000)

18. External Examiner – Final Year Bechelor of Design (B. Des) Art & Design

(Industrial Design), University Technology MARA (UiTM), Shah Alam, Selangor

( 3rd – 4th October, 2001)

19. Judging Panel – Go-cart design competition, Organiser by Kolej Universiti Teknologi

Page 36: ASSOC. PROF. DR. DZULKIFLI BIN AWANG - … · Post: Assistant Lecturer Employer: Faculty of Mechanical Engineering, UTM Date: August 1983 – September 1985 Post: Part Time Lecturer

36

Tun Hussien Onn, Batu Pahat, Johor. (9th-11th November 2001)

20. External Examiner – Final Year Bechelor of Design (B. Des) Art & Design

(Industrial Design), University Technology MARA (UiTM), Shah Alam, Selangor (

28-30 March, 2002)

21. External Examiner – Final Year Diploma in Industrial Design, for Kolej Ugama

Sultan Zainal Abidin (KUZA), Kuala Terengganu, Terengganu (17-19 February

2002)

22. External Examiner – Final Year Diploma in Industrial Design, for Polytechnic Johor

Bahru, Johor (19 April 2002)

23. Judging Panel - Malaysia Good Design Mark, Malaysia Design Council, Menara Tan

& Tan, Jln Tun Razak, Kuala Lumpur. (30th

July, 2002)

24. External Examiner – Final Year Bechelor of Design (B. Des) Art & Design

(Industrial Design), University Technology MARA (UiTM), Shah Alam, Selangor

(30 September – 1 October, 2002)

25. Judging Panel – IKM (Institut Kemahiran MARA) Design Competition held at IKM,

Jasin, Melaka (26-27 October 2002)

26. Judging Panel - Malaysia Good Design Mark, Malaysia Design Council, Menara Tan

& Tan, Jln Tun Razak, Kuala Lumpur. (19 November, 2002)

27. External Examiner – Master of Art & Design (Industrial Design), Universiti

Teknologi MARA, Shah Alam, Selangor (18 December 2002), Candidate: Imran

bin Abdullah, (Title:The Tole of Industrial Design Consultants in Improving

Malaysian Made Product)

28. Judging Panel - Malaysia Good Design Mark, Malaysia Design Council, Menara Tan

& Tan, Jln Tun Razak, Kuala Lumpur. (31 July, 2003)

29. Judging panel – Science Innovation Project Competition for Secondary School in

conjunction with UTM‟s 31st Convocation 2003, UTM. (7th August, 2003)

30. Judging Panel – IKM (Institut Kemahiran MARA) Design/Innovation Competition

held at Malaysian Institute of Aviation Technology (MIAT), Sepang, Selangor (4-5

October 2003)

31. Judging Panel - Malaysia Good Design Mark, Malaysia Design Council, SIRIM,

Shah Alam, Selangor. (6 January, 2005)

32. External Examiner – Master of Science (Product Design), Universiti Putra Malaysia,

Selangor (22 March 2005) Candidate: Jamilludin bin Mohd Noor, (Title: Quality

Page 37: ASSOC. PROF. DR. DZULKIFLI BIN AWANG - … · Post: Assistant Lecturer Employer: Faculty of Mechanical Engineering, UTM Date: August 1983 – September 1985 Post: Part Time Lecturer

37

and Identity of Electrical Product Made in Malaysia from The Perspective of User

and Relationship with New Product Development Policy)

33. External Examiner – 1st Year (2nd

Semester) Bachelor of Applied Arts (Industrial

Design), for Kulliyah of Architecture & Environmental Design, International Islamic

University of Malaysia (Sept 2005)

34. External Examiner – Master of Art & Design (Industrial Design), Universiti

Teknologi MARA, Shah Alam, Selangor (17 October 2005), Candidate:

Mohammad Zaki bin Sharifuddin, (Title: Interaction Design Content and Method:

A Case Study on Industrial Design Students)

35. External Examiner – 2nd Year ( 3rd

Semester) Bachelor of Applied Arts (Industrial

Design), for Kulliyah of Architecture & Environmental Design, International Islamic

University of Malaysia (April 2006)

36. External Examiner – 2nd Year (4th

Semester) Bachelor of Applied Arts (Industrial

Design), for Kulliyah of Architecture & Environmental Design, International Islamic

University of Malaysia (October 2006)

37. External Examiner – 3rd (5th

semester) Year Bachelor of Applied Arts (Industrial

Design), for Kulliyah of Architecture & Environmental Design, International Islamic

University of Malaysia (21 March 2007)

38. External Examiner –2nd

Year (4th

semester) Diploma in Industrial Design, for

Southern College, Johor Bahru, Johor (17 March 2007)

39. External Examiner –3rd Year (5th

semester) Diploma in Industrial Design, for

Southern College, Johor Bahru, Johor (17 March 2007)

40. External Examiner –3rd

Year (6th

semester) Diploma in Industrial Design, for

Southern College, Johor Bahru, Johor (6 December 2008)

41. External Examiner – Final Year Bachelor of Applied Arts (Industrial Design), for

Kulliyah of Architecture & Environmental Design, International Islamic University of

Malaysia (4 April 2008)

42. External Examiner –Doctor of Philosophy (Interior Design), Faculty of Architecture

& Survey, Universiti Teknologi MARA, Shah ALAM, Selangor (2008) Candidate:

Abdul Halim bin Abdul Manaf, (Title: School Furniture Ergonomics: Optimal

Design Criteria for Standard Requirements in Malaysia Education System)

43. Internal Examiner – Master of Engineering, Faculty of Mechanical Engineering,

Universiti Teknologi Malaysia, (2008) Candidate: Norzilawaty bt. Mohamed

Samsudin (Title: Application of Quality Function Deployment in Multimedia

Integrated Telephone Kiosk (MITek) Design)

Page 38: ASSOC. PROF. DR. DZULKIFLI BIN AWANG - … · Post: Assistant Lecturer Employer: Faculty of Mechanical Engineering, UTM Date: August 1983 – September 1985 Post: Part Time Lecturer

38

44. External Examiner – Master of Science (Built Environment), Kulliyah of Architecture

& Environmental Design, International Islamic University of Malaysia, (2009)

Candidate: Mohd Yaser Omari (Title: An Ergonomic Concept Design of A

Motorbike With Prototyping) (11 March 2009)

45. External Examiner – Final Year Bachelor of Applied Arts (Industrial Design), for

Kulliyah of Architecture & Applied Arts (20 April 2009)

46. Assessment Panel - for Malaysia Qualification Agency (MQA)(Formerly known as :

National Board of Accreditation (LAN) - Private Colleges & University Colleges

Assessed (2003-2013):-

1. Programme Name: Diploma Fotografi

IPTS Name: Akademi Kewartawanan dan Komunikasi Hanxing

2. Programme Name: Diploma in Industrial Design

IPTS Name: Institut Putra

3. Programme Name: Bachelor of Arts (Hons) in Animation & Games

Design

IPTS Name: Kolej Universiti Teknologi Kreatif Limkokwing

4. Programme Name: Bachelor of Computer Animation

IPTS Name: Kolej Universiti Teknologi Antarabangsa Twintech

5. Programme Name: Diploma in Industrial Design

IPTS Name: PJ College of Art & Design

6. Programme Name: Bachelor in Games Art & Animation (Hons)

IPTS Name: Kolej Universiti Teknologi & Pengurusan Malaysia

7. Programme Name: Diploma Seni Lukis & Seni Reka (Grafik & Media

Digital)

IPTS Name: Kolej IKIP, Kuantan, Pahang.

8. Programme Name: Bachelor of Arts (Hons) in Games Art

IPTS Name: Kolej Universiti Teknologi Kreatif Limkokwing

Page 39: ASSOC. PROF. DR. DZULKIFLI BIN AWANG - … · Post: Assistant Lecturer Employer: Faculty of Mechanical Engineering, UTM Date: August 1983 – September 1985 Post: Part Time Lecturer

39

9. Programme Name: Bachelor of Arts (Hons) in Product Design &

Innovation

IPTS Name: Kolej Universiti Teknologi Kreatif Limkokwing

10.Programme Name: Bachelor of Design (Hons) in Digital Product Design

IPTA Name: Universiti Teknologi MARA, Shah Alam.

11. Programme Name: Diploma in Product Design

IPTS Name: Kuala Lumpur Metropolitan Unversity College (KLMUC)

12. Programme Name: Bachelor of Arts (Hons) in Product Design Futures

IPTS Name: Kolej Universiti Linton, Mantin, Negeri Sembilan.

13. Programme Name: Dipoma in Product Design

IPTS Name: Kolej Universiti Teknologi Kreatif Limkokwing

14. Programme Name: Diploma & Bachelor in Product Design

IPTS Name: Raffles University Iskandar, Nusajaya, Johor.

47. External Examiner –3rd

Year (6th

semester) Diploma in Industrial Design, for

Southern College, Johor Bahru, Johor ( June 2010)

48. Examiner - EAC Accreditation for Engineering Faculty, UNIMAP, Perlis (18-20

Mei 2010)

49. External Examiner – Final Year Bachelor of Applied Arts (Industrial Design), for

Kulliyah of Architecture & Applied Arts (14th April 2011)

50. External Examiner – Year 1-3, Bachelor of Applied Arts (Industrial Design), for

Kulliyah of Architecture & Applied Arts (21th May 2012)

51. External Examiner –Doctor of Philosophy (Industrial Design), Faculty of Applied

and Creative Arts, Universiti Malaysia Sarawak Kota Samarahan, Sarawak (14 Sept

2012) Candidate: Ahmad Zuhairi bin Abdul Majid, (Title: Design Strategy in

Service Innovation of Automobile Service Center in Klang Valey)

52. External Examiner – Final Year, Bachelor of Arts (Industrial Design), for

Department of Industrial Design, Faculty of Design & Architecture, Universiti Putra

Page 40: ASSOC. PROF. DR. DZULKIFLI BIN AWANG - … · Post: Assistant Lecturer Employer: Faculty of Mechanical Engineering, UTM Date: August 1983 – September 1985 Post: Part Time Lecturer

40

Malaysia, Serdang, Selangor. (20th June 2012)

53. External Examiner –3rd

Year (6th

semester) Diploma in Industrial Design, for

Southern University College, Johor Bahru, Johor (2nd

August 2012)

54. Internal Examiner –Master of Science (Industrial Design), Dept of Industrial

Design, Razak School of Engineering & Advanced Technology, (20 December

2012) Candidate: Liew Yong Kian (Title: Computer Tools in Ideation Process)

11. SEMINAR/CONFERENCE/WORKSHOP/COURSES ATTENDED

11.1 Seminar/Conference/Workshop Attended:

1) Seminar : Japanese Handicraft

Venue : Equatorial Hotel, Kuala Lumpur

Date : 17th- 19th March 1983

Organiser : Japan External Trade Organisation (JETRO)

2) Seminar : Modeling & Simulation in Engineering

Venue : UTM, Jalan Semarak

Date : 4th – 5th June 1986

Organiser : Mechanical Engineering Faculty, UTM

3) Workshop : Workshop on Industrial Design

Venue : Ministry of Trade, Damansara, Kuala Lumpur

Date : 29th July 1988

Organiser : Malaysian Invention & Design Society (MINDS) and

Ministry of Trade

4) Workshop : Workshop on Airbrush Presentation Techniques

Venue : UTM, Jalan Semarak

Date : 22nd – 24th February 1988

Organiser : Training Unit, UTM

5) Seminar : Territorial Army Seminar

Venue : Territorial Army Training Center, Ipoh, Perak

Date : 21st – 22nd July 1989

Organiser : Territorial Army Directorate, Ministry of Defence

6) Workshop : Workshop on Translation

Venue : UTM, Skudai, Johor

Date : 24th – 26th July 1990

Page 41: ASSOC. PROF. DR. DZULKIFLI BIN AWANG - … · Post: Assistant Lecturer Employer: Faculty of Mechanical Engineering, UTM Date: August 1983 – September 1985 Post: Part Time Lecturer

41

Organiser : DBP and UTM

7) Workshop : Workshop on Fisrt Year Engineering Education

Venue : UTM, Skudai, Johor

Date : 16th – 18th July 1991

Organiser : Training Unit, UTM

8) Seminar : Design Production

Venue : National University of Malaysia (UKM) Bangi

Date : 26th – 27th July 1991

Organiser : UKM‟s Student Union, UKM

9) Seminar : Head of Art & Design on Art Education in U.K.

Venue : Rutland Hotel, Sheffield, UK

Date : February 1993

Organiser : Council of National Academic Awards (CNAA) U.K.

10) Seminar : Agricultural Mechanisation

Venue : Awana Golf Resort, Genting Highland

Date : 25th – 27h May 1993

Organiser : MARDI and Agri. Inst. Of Malaysia (AIM)

11) Conference: National Conference on Engineering Education and Research

Venue : Agricultural University (UPM), Serdang, Selangor

Date : 15th – 16th May 1993

Organiser : Engineering Faculty, UPM

12) Seminar : Rakan Muda Rakan Rekacipta

Venue : UTM, Skudai, Johor

Date : 16th January 1996

Organiser : Ministry of Culture & Sports

13) Workshop : Workshop on Total Quality Management

Venue : Kelana Kaya, Kuala Lumpur

Date : 3rd – 6th June 1996

Organiser : Army Training and Doctrine Headquarters, Ministry of Defence and

Department of Civil Services (JPA)

14) Conference: Design Conference

Venue : Shangri-La Hotel, Kuala Lumpur

Date : 14th – 16th October 1996

Organiser : Malaysian Design Council (MDC)

15) Conference: ASEAN Ergonomics 97‟

Venue : Renaissance Hotel, Kuala Lumpur

Date : 6th – 8th November 1997

Page 42: ASSOC. PROF. DR. DZULKIFLI BIN AWANG - … · Post: Assistant Lecturer Employer: Faculty of Mechanical Engineering, UTM Date: August 1983 – September 1985 Post: Part Time Lecturer

42

Organiser : South East Asean Ergonomics Society (SEAES) and University Malaysia

Sarawak (UNIMAS)

16) Seminar : Safety and Rescue Campaign

Venue : Puteri Pan Pacific Hotel, Johor

Date : 25th April 1998

Organiser : Malaysia Emergency Team (PTCM) Road Safety Council of Malaysia

17) Seminar : National Seminar on Invention and Design in Education 1998

Venue : Curriculum Development Centre, Ministry of Education, Kuala Lumpur

Date : 12th – 15th October 1998

Organiser : Malaysia Design Council and Ministry of Education Malaysia.

18) Seminar : Seminar on Smart Innovation – From R&D to Market

Venue : Industrial Center, Technovation Park, UTM, Skudai

Date : 21st November 1998

Organiser : Innovation Bureau and Consultancy, UTM.

19) Seminar : Seminar on Invention – Rakan Muda, Rakan Rekacipta 98‟ (Presenter)

Venue : ITTHO, Batu Pahat, Johor.

Date : 28th December 1998

Organiser : Malaysia Design Council , Ministry of Science Environment and UTM.

20) Seminar : Education Convention 99, UTM

Venue : UTM, kampus Skudai

Date : 10th Novemvber 1999

Organiser : UNIPEN, Human Resources Development Unit, SPACE, UTM

21) Seminar : Forum on Malaysia's Economy with Majlis Tindakan Ekonomi Negara

(MTEN)

Venue : University Technology Malaysia

Date : 14th June 2000

Organiser : UTM and MTEN

22) Conference: Asia Pacific Design Conference and Design Exhibition 2000 (Presenter)

Venue : Putera World Trade Center, Kuala Lumpur

Date : 10th- 12th October 2000

Organiser : Malaysia Design Council & Japan Design Foundation (JDF)

23) Workshop : Wokshop on Rakan Muda Rakan Rekacipta Johor.

Venue : Dewan kuliah 1, Faculty of Mechanical Engineering, UTM, Skudai

Date : 9th November 2000

Organiser : Technology Design Center UTM and Ministry of Science, Technology &

Environment Johor.

24) Seminar : Design for The New Millennium (chairperson)

Page 43: ASSOC. PROF. DR. DZULKIFLI BIN AWANG - … · Post: Assistant Lecturer Employer: Faculty of Mechanical Engineering, UTM Date: August 1983 – September 1985 Post: Part Time Lecturer

43

Venue : Hotel Puteri Pan Pacific, Johor Bahru, Johor

Date : 15th January 2001

Organiser : Design Dept.UTM, SIRIM and Malaysia Design Council.

25) Seminar : Managing Quality Measurement for Government Sector

Venue : PJ Hilton Hotel, Petaling Jaya

Date : 8th -9th August 2001

Organiser : National Productivity Council, Malaysia

26) Conference: First National Conference for Enterpreneur and Small Bussiness.

(Presenter)

Venue : Langkawi City Bayview Hotel

Date : 8th-9th September 2001

Organiser : Universiti Utara Malaysia

27) Conference: 5th Asian Design Conference and Design Symposium. (Presenter)

Venue : Seoul National University, South Korea.

Date : 11th – 13th October 2001

Organiser : KAIST, Korea; JDF, Japan; CDS, China.

28) Seminar : Education Convention 2001, UTM

Venue : Eden Garden Hotel,Johor Bahru, Johor.

Date : 7th November 2001

Organiser : UNIPEN, Human Resources Development Unit, SPACE, UTM

29) Conference: Malaysia Design Conference 2003

Venue : Pan Pacific Hotel,Kuala Lumpur.

Date : 8th – 9th

October 2003

Organiser : Malaysia Design Council (Presenter)

30) Seminar : Learning Skill for SPACE Students.

Venue : Block N24 UTM Skudai , Johor

Date : 20th

May 2004

Organiser : School of Profesional and Cotinuous Education (S.P.A.C.E.) UTM

31) Seminar : "Wacana Ilmu"

Venue : Dewan Senat, UTM

Date : 7/9/2004

Organiser : Human Resources Dept UTM

32) Conference: Conference on Engineering Education (CEE 2004),

Venue : Renaissance Hotel, Kuala Lumpur.

Date : 14-15th December 2004

Organiser : SPACE, UTM and Institute of Engineers Malaysia (IEM) & Malaysian

Council of Engineering Deans (MCED) (Presenter)

Page 44: ASSOC. PROF. DR. DZULKIFLI BIN AWANG - … · Post: Assistant Lecturer Employer: Faculty of Mechanical Engineering, UTM Date: August 1983 – September 1985 Post: Part Time Lecturer

44

33) Seminar : "Network Centric Warfare"

Venue : Hyatt Regency Hotel, Teluk Cempedak, Kuantan

Date : 9-11/12/2004

Organiser : Ministry of Defence

34) Conference: National Conference on Skills & Competencies in Education

Venue : School for Humanities Studies, USM

Date : 29-30th December 2005

Organiser : School for Humanities Studies, USM (Presenter)

35) Seminar : Half Day Seminar On Engineering Education "OBE",

Venue : Rumah Alumni, UTM

Date : 9th December 2005

Organiser : Faculty of Chemical Engineering & Natural Resources Engineering,

UTM

36) Seminar : Forum on “Islam Hadhari”

Venue : Kolej Universiti Tun Hussein Onn, Batu Pahat

Date : 4/8/2005

Organiser : Kolej Universiti Tun Hussein Onn, Batu Pahat

37) Seminar : Territorial Army Commanding Officer‟ Dialog Venue : Guoman Hotel, Port Dickson

Date : Oct 2006

Organiser : Ministry of Defence

38) Seminar : Education Symposium

Venue : Persada Johor, Johor Bahru

Date : 5-6/12/2006

Organiser : HRD & CTL, UTM

39) Conference: Asia Design Network Conference

Venue : MATRADE Exhibition & Convention Center, Kuala Lumpur

Date : 30-31 October 2007

Organiser : Organised by Malaysia Design Council & Asia Design Network.

40) Conference: 2nd

Regional Conference on Engineering Education RCEE 2007

Vanue : Persada Johor, Johor bahru, Johor

Date : 3rd

– 5th

December 2007

Organiser : Organised by Universiti Teknologi Malaysia, Institute of Engineers

Malaysia & Council of Engineering Deans Malaysia

41) Conference: International Conference of Applied and Creative Arts (ICACA 2008)

Venue : Faculty of Applied Arts & Design

Date : 16- 17 January 2008

Organiser : Organised by Universiti Malaysia Sarawak (UNIMAS), Kuching,

Page 45: ASSOC. PROF. DR. DZULKIFLI BIN AWANG - … · Post: Assistant Lecturer Employer: Faculty of Mechanical Engineering, UTM Date: August 1983 – September 1985 Post: Part Time Lecturer

45

42) Workshop : Review of Generic Skills Assessment FME

Venue : Faculty of Mechanical Engineering

Date : 27 February 2008

Organiser : Faculty of Mechanical Engineering, Universiti Teknologi Malaysia

43) Conference: International Furniture Conference and Exhibition

Venue : PUTRA World trade Center, Kuala Lumpur

Date : 28-30 July 2008

Organiser : Organised by Universiti Teknologi MARA (Kelantan Branch)

44) Workshop : Learning Assessment System Reviewing Workshop

Venue : Klana Resort, Seremban, Negeri Sembilan

Date : 31st Oct – 2

nd November 2008

Organiser : Centre for Teaching & Learning (CTL) , Universiti Teknologi Malaysia

45) Workshop : Academic Programme Assessment Review Workshop

Venue : Crown Princess Hotel, Kuala Lumpur

Date : 28-30 November 2008

Organiser : Centre for Teaching & Learning (CTL), Universiti Teknologi Malaysia

46) Workshop : Internal Audit Assessment For Faculty of Chemical Eng. & Natural

Resources Engineering Workshop

Venue : Pulai Spring Resort, Johor Bahru

Date : 13-15 January 2009

Organiser : Centre for Teaching & Learning (CTL), Universiti Teknologi Malaysia

47) Workshop : Programme Objective & Programme Learning Outcome Mapping

Workshop

Venue : Sofitel Palm Resort, Johor Bahru

Date : 17-18 February 2009

Organiser : Centre for Teaching & Learning (CTL), Universiti Teknologi Malaysia

48) Workshop : Internal Audit Assessment For Faculty of Electrical Engineering

Workshop

Venue : UTM, Johor Bahru

Date : 25th May 2009

Organiser : Centre for Teaching & Learning (CTL), Universiti Teknologi Malaysia

49) Workshop : Malaysia Qualification Agency – Accreditation Workshop (MQA)

Venue : Hotel Seri Pacific, Kl

Date : 4-6th August 2009

Organiser : Malaysia Qualification Agency

50) Workshop : Bengkel Jaminan Kualiti MQA- Latihan Kod Amalan Utk Akreditasi

Program (COPPA)

Venue : Mines Wellness Hotel. Sg Besi.

Date : 22-23rd November 2009

Page 46: ASSOC. PROF. DR. DZULKIFLI BIN AWANG - … · Post: Assistant Lecturer Employer: Faculty of Mechanical Engineering, UTM Date: August 1983 – September 1985 Post: Part Time Lecturer

46

Organiser : Malaysia Qualification Agency

51) Workshop : Bengkel Mapping PO & PLO,

Venue : M-Suite Hotel, JB

Date : 17-18th February 2009

Organiser : UTM

52) Workshop : Bengkel Semakan OBE, FKM,

Venue : Coral Paradise Resort Port Dickson

Date : 15-17th June 2009

53) Workshop : Bengkel APA, anjuran Unit Kualiti di KTC,

Venue : UTM

Date : 18 th November 2009

54) Seminar : Seminar Pegawai Memerintah Askar Wataniah,

Venue : BPS, MINDEF, KL

Date : 11-13th

August 2009

Organiser : Bahagian Pasukan Simpanan, Ministry of Defence

55) Seminar : Konvensyen PIBG peringkat Negeri Johor

Venue : Hotel Selesa, Johor Bahru

Date : 13-14th Mac 2010)

Organiser : Jabatan Pendidikan Negeri Johor

56) Workshop : Bengkel Penyemakan Program SRI (Prog 3 Thn) organised by Razak

School of Manufacturing & Advanced Technology, UTM

Venue : M-Suite Hotel, Johor Bahru

Date : 15-17th October 2010

Organiser : UTM

57) Workshop : Industrial PHD Supervisors Training Programme, organised by MDPS

& MOHE

Venue : Pulai Spring Resort

Date : 27-29th July 2011

Organiser : UTM

58) Workshop : Bengkel Pengemaskinian Silibus Program Ijazah & Diploma Rekabentuk

Peridustrian.

Venue : Grand Continent Hotel, Kuala Terengganu.

Date : 11-13th July 2011

Organiser : Razak School of Manufacturing & Advanced Technology, UTM

59) Workshop : Bengkel Program Kecemerlangan Sekolah Kluster Ministry of

Education and Ministry of Higher Education

Venue : Hotel Selesa, Johor Bahru

Page 47: ASSOC. PROF. DR. DZULKIFLI BIN AWANG - … · Post: Assistant Lecturer Employer: Faculty of Mechanical Engineering, UTM Date: August 1983 – September 1985 Post: Part Time Lecturer

47

Date : 12th December 2011

Organiser : Ministry of Education and Ministry of Higher Education

60) Seminar : Seminar Pegawai Memerintah Askar Wataniah,

Venue : Regiment 509 Territorial Army, Penang.

Date : 18-20 March 2011

Organiser : Bahagian Pasukan Simpanan, Ministry of Defence

61) Seminar : Seminar Pegawai Memerintah Askar Wataniah,

Venue : Pusat Latihan Pengaman PBB, Kem Segenting, Port Dickson.

Date : 16-18th

November 2012

Organiser : Bahagian Pasukan Simpanan, Ministry of Defence

11.2 Courses Attended

1) Course : Lecturer‟s Course

Venue : UTM, Jalan Semarak

Date : July 1987 (1 semester)

Organiser : Training Unit, UTM

2) Course : Quantitative and Qualitative For SLAB

Venue : University of Malaya

Date : 20th May - 29th June 1991

Organiser : Department of Civil Services (JPA)

3) Course : Company Weapon for Territorial Army (TA) Officers

Venue : Cadet Training School, Sebatang Karah, Port Dickson

Date : May – June 1983 (1 month)

Organiser : Territorial Army Directorate, Ministry of Mefence

4) Course : Tactic Course for Young Officers

Venue : Cadet Training School, Sebatang Karah, Port Dickson

Date : June – July 1984 (1 month)

Organiser : Territorial Army Directorate, Ministry of Defence

5) Course : Junior Staff Officer Course (Part 1)

Venue : Territorial Army Training Center, Ipoh, Perak

Date : November – December 1986 (1 month)

Organiser : Territorial Army Directorate, Ministry of Defence

6) Course : Junior Staff Officer Course

Venue : Territorial Army Training Center, Ipoh, Perak

Date : November- December 1989 (1 month)

Organiser : Territorial Army Directorate, Ministry of Defence

Page 48: ASSOC. PROF. DR. DZULKIFLI BIN AWANG - … · Post: Assistant Lecturer Employer: Faculty of Mechanical Engineering, UTM Date: August 1983 – September 1985 Post: Part Time Lecturer

48

7) Course : Company Commander Course

Venue : Territorial Army Training Center, Ipoh, Perak

Date : October – Novembr 1995 (1 month)

Organiser : Territorial Army Directorate, Ministry of Defence

8) Course : Student Advisor

Venue : Pulai Springs Golf Resort, Johor

Date : 25th – 26th June 1996

Organiser : Mechanical Engineering Faculty, UTM

9) Course : Invention and Design Basic

Venue : Hotel Seri Malaysia, Johor

Date : 28th –30th October 1996

Organiser : Ministry of Education

10) Course : Design Lecture

Venue : Menara Tan & Tan, Kuala Lumpur

Date : 28th – 30th January 1997

Organiser : Malaysia Design Council

11) Course : Multimedia in Education

Venue : Faculty of Education, UTM, Skudai.

Date : 21st - 22nd April 1999

Organiser : Human Resources Development Unit, UTM

12) Course : Effective Supervision for Post Graduate Students

Venue : Dewan Jumaah, UTM, Skudai.

Date : 9th – 10th June 1999

Organiser : Human Resources Development Unit, UTM.

13) Course : Typesetting Documents with LATEX in Widows

Venue : Computer Laboratory, Faculty of Mechanical Engineering, UTM,

Skudai.

Date : 26th April 2000

Organiser : Information Technology Management & Computer Lab FME

14) Course : Workshop & Strategic Planning

Venue : Desaru Golden Beach Hotel, Desaru, Johor.

Date : 17th - 19th November 2000

Organiser : Gas Technology Research Group (GASTEG) FKKKSA, UTM, Skudai.

15) Course : Workshop & Strategic Planning

Venue : Hotel Seri Malaysia, Genting Highland.

Date : 20th-22nd January 2000

Organiser : Mechnanical Engineering Faculty, UTM, Skudai.

Page 49: ASSOC. PROF. DR. DZULKIFLI BIN AWANG - … · Post: Assistant Lecturer Employer: Faculty of Mechanical Engineering, UTM Date: August 1983 – September 1985 Post: Part Time Lecturer

49

16) Course : Workshop & Strategic Planning

Venue : Hotel Seri Malaysia, Genting Highland.

Date : 3rd – 5th February 2001

Organiser : Mechnanical Engineering Faculty, UTM, Skudai.

17) Course : Managing Change

Venue : Holiday Inn Crowne Plaza, Johor Bahru, Johor.

Date : 8th – 10th May 2001

Organiser : Human Resources Department, Chancellery, UTM

18) Course : Project Management and Control.

Venue : Business and Advanced Technology Center (BATC), UTM, Kuala

Lumpur.

Date : 18th – 20th June 2001

Organiser : Human Resources Department, Chancellery, UTM

19) Course : Academic Supervision

Venue : Starhill Golf Resort Kempas, Johor Bahru, Johor

Date : 13th-14th June 2001

Organiser : Human Resources Department, Chancellery, UTM

20) Course : Managing Stress

Venue : Hyatt Hotel, Johor Bahru, Johor

Date : 21st – 22nd June 2001

Organiser : Human Resources Department, Chancellery, UTM

21) Course : Stratagic Planning Workshop

Venue : Century Hotel, Melaka

Date : 6th-8th July 2001

Organiser : Vice Chancellor Academic Office, UTM

22) Course : Corporate Management Course

Venue : Hyatt Hotel, Johor Bahru, Johor

Date : 27th – 28th August 2001

Organiser : Human Resources Department, Chancellery, UTM

23) Course : Workshop on SKT Assesment

Venue : Goodhope Hotel, Skudai, Johor Bahru, Johor

Date : 4th September 2001

Organiser : Human Resources Department, Chancellery, UTM

24) Course : Forum/Dialog on “Design” for Institution of Higher Learning and

Industries.

Venue : Concorde Hotel Shah Alam, Selangor

Page 50: ASSOC. PROF. DR. DZULKIFLI BIN AWANG - … · Post: Assistant Lecturer Employer: Faculty of Mechanical Engineering, UTM Date: August 1983 – September 1985 Post: Part Time Lecturer

50

Date : 1st October 2001

Organiser : Malaysia Design Council.

25) Course : E-Learning

Venue : Computer Center UTM Block N25

Date : 31st August – 1st November 2001

Organiser : Human Resources Department and Design dept, FME, UTM

26) Course : Original Writing for Publication

Venue : Sofitel Hotel, Senai, Johor

Date : 5th-7th February 2002

Organiser : Human Resourced Development, UTM

27) Course : E-Learning

Venue : Computer Center UTM Block N25

Date : 16th- 17th January 2002

Organiser : Human Resources Developmenyt Unit and Design /Dept, FME, UTM

28) Course : Counseling Method in Organisation

Venue : Sofitel Hotel, Senai, Johor.

Date : 26th- 27th March 2002

Organiser : Human Resources Development Unit, UTM

29) Course : Biro Tata Negara

Venue : Kem Bina Negara, Meru, Klang, Selangor

Date : 25th – 29th May 2002

Organiser : Biro Tata Negara, Ministers‟ Department, Putrajaya.

30) Course : Self Excellence and Organisation

Venue : Corus Resort , Port Dickson

Date : 23rd – 26th June 2002

Organiser : Human Resources Development Unit, UTM

31) Course : Workshop on Introduction to Accreditation

Venue : Pan Pacific Hotel, Johor Bahru

Date : 30th

January 2003

Organiser : National Board of Accreditation Malaysia

32) Course : Introduction to ISO 9000 : 2000

Venue : Hotel Seri Costa, Melaka

Date : 17th-18th

February 2003

Organiser : Faculty of Mechanical Engineering, UTM.

33) Course :Workshop on Quality Assurance

Venue : Allson Kelana Resort, Seremban

Date : 15th-18th

October 2003

Page 51: ASSOC. PROF. DR. DZULKIFLI BIN AWANG - … · Post: Assistant Lecturer Employer: Faculty of Mechanical Engineering, UTM Date: August 1983 – September 1985 Post: Part Time Lecturer

51

Organiser : Faculty of Mechanical Engineering, UTM.

34) Course : Proof Reading

Venue : Sofitel Golf Resort, Senai, Johor

Date : 10th-12th

March 2004

Organiser : Publishing Unit & UNIPEN, UTM.

35) Course : Proficiency Level Course (PTK 6)

Venue : Post Graduate Center, UTM Skudai.

Date : 12th-28th

April 2004

Organiser : Teaching & Learning Unit (UNIPEN) UTM

36) Course : "Generic Skill”

Venue : Rumah Alumni UTM

Date : (9-11/8/2004

Organiser : UNIPEN/HRD UTM)

37) Course : Emotional Intelligence (EI)

Venue : Awana Genting Golf Resort, Genting Highland, Pahang

Date : 11th-14th

May 2004

Organiser : Army Training Headquarters (Intelligent Section), Ministry of Defence.

38) Course : Workshop – Updating L2 Subjects

Venue : Dewan Seminar, FME

Date : 27th

January 2005

Organiser : FME, UTM

39) Course : Mengurus Pekerja Bermasalah “Managing Problematic Staff”

Venue : Grand Blue Wave Hotel, Johor Bahru

Date : 15-16 February 2005

Organiser : Human Resources Development Unit, UTM

40) Course : E-Learning Workshop

Venue : Dewan Seminar, FME

Date : 2nd

March 2005

Organiser : FME, UTM

41) Course : Alias-Wavefront (Alias Studio Tools) Course

Venue : Computer Laboratory Block C23, FME

Date : 11th

-15th

March 2005

Organiser : FME, UTM STOP DI SINI 27 JUN

42) Course : UTM‟s Programme Specification Pre-Workshop

Venue : Sofitel palm Resort Senai

Date : 12th March 2005

Organiser : Human Resources Development Unit & Center for Teaching & Learning

Page 52: ASSOC. PROF. DR. DZULKIFLI BIN AWANG - … · Post: Assistant Lecturer Employer: Faculty of Mechanical Engineering, UTM Date: August 1983 – September 1985 Post: Part Time Lecturer

52

(CTL), UTM.

43) Course : UTM‟s Programme Specification Workshop

Venue : Renaissance Hotel, Melacca.

Date : 6th

-8th May 2005

Organiser : Human Resources Development Unit & Center for Teaching & Learning

(CTL), UTM.

44) Course : Adult Learning

Venue : Rumah Alumni

Date : 17th May 2005

Organiser : SPACE & Center for Teaching & Learning

(CTL), UTM.

45) Course : Workshop on "Outcome-Based Education

Venue : Rumah Alumni

Date : 14-15/12/2005

Organiser : FKKKSA, UTM

46) Course : Workshop on "PEMANTAPAN PENILAIAN DOKUMEN LAN"

Venue : Mutiara Hotel , Johor Bahru

Date : 27-29/9/2005

Organiser : National Acreditation Board

47) Course : Terrotorial Army Anniversary Dialog,

Venue : Universiti Kebangsaan Malaysia

Date : 19-21/7/2005

Organiser : Ministry of Defence

48) Course : “Space Management”

Venue : Mahkota Hotel, Melaka

Date : 3-5/2/2006

Organiser : Property Office, UTM

49) Course : "Strategic Planning"

Venue : Tanjung Balau, Desaru

Date : 24-26/2/2006

Organiser : FME

50) Course : Active Learning & Co-opperative Learning"

Venue : Pulai Spring Resort, Johor Bahru

Date : 25-26/4/2006

Organiser : CTL/HRD UTM

51) Course : "Outcome- based Education”

Venue : FME Seminar Hall

Page 53: ASSOC. PROF. DR. DZULKIFLI BIN AWANG - … · Post: Assistant Lecturer Employer: Faculty of Mechanical Engineering, UTM Date: August 1983 – September 1985 Post: Part Time Lecturer

53

Date : 18-19/3/2006

Organiser : FME

52) Course : "Academic advisery"

Venue : FME Seminar Hall

Date : 30/8/2006 Organiser : FME

53) Course : "Problem-based Learning"

Venue : Puteri Pan Hotel, Johor Bahru

Date : 20-21/9/2006

Organiser : HRD & CTL

54) Course : "Programme Specification”

Venue : Mahkota Hotel, Melaka

Date : 10-12/11/2006

Organiser : , HRD & CTL UTM,

55) Course : "Student‟s Portfolio"

Venue : Mahkota Hotel, Melaka

Date : 15-17/10/2006

Organiser : CTL & HRD, UTM

56) Course : "Academic Auditing”

Venue : Hyatt Hotel, Johor Bahru

Date : 26-28/11/2006

Organiser : CTL UTM

57) Course : Pemantapan Kertas Kerja Program B.ENG. Tech (Industrial Design

UniKL.

Venue : Water City Hotel Air Keroh, Melaka

Date : 4-16/12/2006)

Organiser: Faculty of Manufacturing Technology, Universiti Kuala Lumpur

(UniKL)

58) Course : Senior Command Course

Venue : Territorial Army Training Center, Ipoh, Perak

Date : 29 September – 11 October 2007 (2 weeks)

Organiser : Territorial Army Directorate, Ministry of Defence

59) Course : Workshop “Pengemaskinian Silibus Ijazah & Diploma Rekabentuk

Perindustrian (External Panel)

Venue : Grand Continental, Kuala Terengganu.

Date : 11-13 July 2011

Organiser : Universiti Sultan Zainal Abidin (UNISZA)

Page 54: ASSOC. PROF. DR. DZULKIFLI BIN AWANG - … · Post: Assistant Lecturer Employer: Faculty of Mechanical Engineering, UTM Date: August 1983 – September 1985 Post: Part Time Lecturer

54

60) Course : Workshop “Industrial PHD Supervisors Training Programme”

Venue : Pulai Spring Resort

Date : 27-29 July 2011

Organiser : MDPS & KPT

61) Course : Workshop “Bengkel Program Kecemerlangan Sekolah Kluster KPM dan

KPT

Venue : Hotel Selesa, Johor Bahru

Date : 12 December 2011

Organiser : Kementerian Pendidikan Malaysia.

62) Course : OBE Course- On-line Course Review Report & Programme Review

Report.

Venue : Computer Laboratory, Center for Teaching & Learning, UTM

Date : 6th

July 2012

Organiser : Center for Teaching & Learning, UTM

63) Course : Workshop “Pengemaskinian Silibus Ijazah & Diploma Rekabentuk

Perindustrian” (External Panel)

Venue : Grand Continental, Kuala Terengganu.

Date : 18-20 June 2013

Organiser : Universiti Sultan Zainal Abidin (UNISZA)

12. PROJECT AND RESEARCH

a) A Mechanised Sprayer for Tobacco Cultivation in Malaysia

Research : Master Degree Project

Duration : September 1984 – June 1986

Venue : Manchester Polytechnic, Manchester, United Kingdom

Scope : Problem definition, design criteria, design specification, design

concept, proposed design, engineering drawing, presentation

drawing, model and report-cum-thesis.

Page 55: ASSOC. PROF. DR. DZULKIFLI BIN AWANG - … · Post: Assistant Lecturer Employer: Faculty of Mechanical Engineering, UTM Date: August 1983 – September 1985 Post: Part Time Lecturer

55

b) Vacuum Packaging Machine

Position : Project leader

Duration : July 1989 - December 1990

Venue : University Technology Malaysia

Fund : Research & Consultancy Unit, UTM (RM5,000)

Scope : Market survey, problem definition, design criteria, design

specification, design concept, proposed design, production

drawing, prototyping of the final design.

c) Assault Boat Trailer Design

Position : Researcher/ Designer (under GRP Assault Boat design Group)

Duration : January 1991 – September 1991

Venue : University Technology Malaysia

Scope : Design concept, proposed design, engineering drawing.

d) The Potential Contribution of Industrial Design to the Adaptation of Agricultural

Machinery for use in Malaysia

Research : Ph.D Project

Duration : November 1991 – March 1995

Venue : The Manchester Metropolitan University, Manchester, United

Kingdom

Scope : Problem statement, Literature review, Field study, Case study,

Sample studies Statistical analyses (SPSS PC+) Theoretical

analyses and findings, Recommendations

e) Design and Fabrication of a Super-kart F1

Position : Project Leader

Page 56: ASSOC. PROF. DR. DZULKIFLI BIN AWANG - … · Post: Assistant Lecturer Employer: Faculty of Mechanical Engineering, UTM Date: August 1983 – September 1985 Post: Part Time Lecturer

56

Duration : August 1996 – December 1998

Venue : University Technology Malaysia

Fund : Research & Consultancy Unit, UTM

Scope : Market research, problem definition, design criteria, design

specification, design concept, proposed design, production

drawing, prototyping and testing of the final design.

f) Mobile Field Kitchen Design

Position : Project Leader

Duration : March 1998 – March 1999

Venue : University Technology Malaysia

Fund : Management Budget/ PALAPES, UTM

Scope : Field Study, problem definition, design criteria, design

specification, design concept, proposed design, production

drawing, prototyping and testing of the final design and

submission for Malaysia Army TQM Competition.

g) Catamaran Sailing Boat Design

Position : Project Leader

Duration : March 1998 – March 1999

Venue : University Technology Malaysia

Fund : Management Budget/ PALAPES, UTM

Scope : Field Study, problem definition, design criteria, design

specification, design concept, proposed design, production

drawing, prototyping and testing of the final design and

submission for Malaysia Army TQM Competition.

Page 57: ASSOC. PROF. DR. DZULKIFLI BIN AWANG - … · Post: Assistant Lecturer Employer: Faculty of Mechanical Engineering, UTM Date: August 1983 – September 1985 Post: Part Time Lecturer

57

13. CONSULTANCY

a) Project : Speed Boat Design (under Marine Research Group)

Duration : Started 1997

Company : Diversified Marine Services (DMS), Pasir Gudang, Johor.

Scope : Design concept, presentation drawing.

b) Project : a) Washing Machine for „Pegaga‟ (centella asiatica) herbs

: b) Grinding Machine for „Pegaga‟ (centella asiatica) herbs

: c) Pressing Machine for „Pegaga‟ (centella asiatica) herbs

Duration : Started September 1998

Company : Syarikat Perniagaan Orang Kampung Sdn. Bhd.

Scope : Groundwork study, Design concept, Engineering drawing, Prototying

And Testing.

c) Project : Telephone Booth Design

Duration : Started Oct 1999

Company : Payphone Sdn Bhd

Scope : Design Concept

d) Project : Bean Sprout Processing Machine Design

Duration : Julai - November 2001

Company : Bean Stalk Sdn Bhd, Pekan Nenas, Johor

Scope : Design Concept

Page 58: ASSOC. PROF. DR. DZULKIFLI BIN AWANG - … · Post: Assistant Lecturer Employer: Faculty of Mechanical Engineering, UTM Date: August 1983 – September 1985 Post: Part Time Lecturer

58

e) Project : Multi Media Trolley Design

Duration : January 2003

Company : Gading Kencana Sdn Bhd, Subang Jaya, Selangor

Scope : Design Concept

14. PUBLICATIONS

14.1 Books

1. Industrial Design Glossary, Dewan Bahasa & Pustaka (DBP), Kuala Lumpur,

ISBN 983-62-3767-41, 1993

2. Encyclopedia of Science and Engineering, Word entry for “Industrial Design” field,

Dewan Bahasa & Pustaka (DBP), Kuala Lumpur (1999)

3. Warkah Anak Merdeka, Antologi Puisi Kemerdekaan dan Petriotisma, (sumbangan 2

buah puisi – ”Patrotisma Jiwa Merdeka & ”Semarak Merdeka”) Penerbit UTM,

(2007)

4. Buletin of The Mechanical Colloqium, Faculty of Mechanical Engineering, UTM

Vol.4 No.1 July 2007 – ”Physical Facilities for Industrial Design Programme to

Achieve Generic Skills”

14.2 National Papers

1. Dzulkifli Awang (1996) Design Challenge in Future, Seminar on Rakan Muda Rakan

Rekacipta, Johor State Level, UTM, Organiser by UTM, MINDS and Ministry of

Science and Environment, 16th January 1996 (presenter)

2. Dzulkifli Awang (1996) Invention, Design and Industrial Designers, Technology and

Innovation in Education Course, Johor Bahru, Johor, Organiser by Faculty Of

Education, UTM and Johor District Education Office, 29th-30th October 1996

(presenter)

3. Dzulkifli Awang (1996) Design Development of Mobile Field Kitchen, Arm Forces

Page 59: ASSOC. PROF. DR. DZULKIFLI BIN AWANG - … · Post: Assistant Lecturer Employer: Faculty of Mechanical Engineering, UTM Date: August 1983 – September 1985 Post: Part Time Lecturer

59

TQM /Innovation Project, Organiser by PALAPES UTM, UTM, Johor. (1996)

(presenter)

4. Dzulkifli Awang (1996) Design and Industrial Design, Mechanical Engineering

Faculty Colloquium, Organiser by MECH. ENG. FACULTY (1996) (presenter)

5. Dzulkifli Awang (1996) Catamaran Sailing Boat Design for ROTU (marine officers

cadet), UTM, Organiser by PALAPES UTM (1996) (presenter)

6. Dzulkifli Awang & Kamal Azam Bani Hashim (1998) Study Opportunities for

Design & Invention Subjects in Institutions of Higher Learning, Organiser by

Curriculum Development Center, Ministry of Education, Jalan Duta, Kuala Lumpur

14th Oct 1998 (presenter)

7. Dzulkifli Awang (1998) Pendidikan Lanjutan Rekabentuk di IPT , Seminar on Rakan

Muda Rakan Rekacipta, Johor State Level, UTM, Organiser by UTM, MINDS and

Ministry of Science and Environment, 16th January 1998 (presenter)

8. Dzulkifli Awang (1999) Pendidikan Reka Cipta, Workshop on Rakan Muda Rakan

Rekacipta, Johor State Level, UTM, Organiser by Pusat Rekacipta UTM and Johor

State Education, 22nd May 1999 (presenter)

9. Dzulkifli Awang (1999) Design Development of Mobile Field Kitchen, Arm Forces

TQM/Innovation Project, Organiser by Markas Tentera Darat, Ministry of Defence,

Jalan Padang Tembak, Kuala Lumpur, 31st December 1999 (prersenter)

10. Dzulkifli Awang and Kamal Azam Bani Hashim (2000) Reka Cipta - Suatu

Keperluan?, Workshop on Rakan Muda/Rakan Rekacipta, in conjunction with

Minggu Penggalakan Sains dan Teknologi Johor, Organiser by Pusat Rekacipta UTM

and Ministry of Science, Technology & Environment Johor, University Technology

Malaysia, Skudai, Johor 9th - 11th November 2000 (joined paper)

11. Dzulkifli Awang (2001) Role and Contribution of Industrial Design in Small Industry

Product, at City Bayview Hotel, Langkawi, Organiser by School of Business

Management, University Utara Malayia, 8th-9th September 2001.

12. Dzulkifli Awang (2003) Malaysia Design Conference: Industrial Design Curriculum

in Universiti Teknologi Malaysia, Malaysia Design Conference & Exhibition, Putera

World Trade Center, Kuala Lumpur, Organiser by Malaysia Design Council (MDC)

8th

-10th October 2003 (presenter).

13. Dzulkifli Awang (2003) Industrial Design in Engineering Curricullum, Conference on

Engineering Education, Renaissance Hotel, Kuala Lumpur, Organiser by School of

Professional and Continuous Education (SPACE) UTM, Institute of Engineers

Malaysia and Malaysian Council of Engineering Deans (MCED), 14-15th

December

2004. (presenter)

Page 60: ASSOC. PROF. DR. DZULKIFLI BIN AWANG - … · Post: Assistant Lecturer Employer: Faculty of Mechanical Engineering, UTM Date: August 1983 – September 1985 Post: Part Time Lecturer

60

14. Dzulkifli Awang (2005) Industrial Design in Mechanical Engineering Curricullum in

UTM and the Emergence of a new course - Bachelor Science Industrial Design ,

National Conference on Skills & Competencies in Education, Organiser by School of

Humanities, Universiti Sains Malaysia, 29-30th

November 2005. (presenter)

15. Dzulkifli Awang (2007) Comparison Between “Project-Oriented Learning and

Problem-based Learning (PBL) in Design Subjects; 2nd

Regional Conference on

Engineering Education RCEE 2007, Persada Johor, Johor bahru, Johor, Organiser by

Universiti Teknologi Malaysia, Institute of Engineers Malaysia & Council of

Engineering Deans Malaysia; 3rd

– 5th

December 2007 (presenter).

14.3 International Papers:

1. Dzulkifli Awang (2000) Malaysia Design: Culture, Identity and Globalisation, Asia

Pacific Design Conference & Exhibition, Putera World Trade Center, Kuala Lumpur,

Organiser by Malaysia Design Council (MDC) and Japan Design Foundation (JDF)

10th-12th October 2000 (presenter).

2. Dzulkifli Awang (2001) Design Made in Malaysia, Design Scene No: 52, Japan

Design Foundation (JDF) Osaka, Japan.

3. Dzulkifli Awang (2001) Design Education for the New Millennium, 5th Asian Design

Conference and Design Symposium, at Seoul National University, South Korea,

Organiser by Korean Advance Institute of Science & Technology (KAIST), Japan

Design Foundation (JDF) China Design Foundation., 11th – 13th October 2001.

4. Dzulkifli Awang (2007) Developing Design Curricullum for the Changing Design

Environment, Asia Design Network Conference, Organiser by Malaysia Design

Council & Asia Design Network, MATRADE Exhibition & Convention Center,

Kuala Lumpur, 30-31 October 2007

5. Dzulkifli Awang (2008) Sketching & Drawing – An Aid to Creativity in Design, 2nd

International Conference of Applied and Creative Arts (ICACA 2008), Organiser by

Universiti Malaysia Sarawak (UNIMAS), Kuching, 16- 17 January 2008

6. Dzulkifli Awang (2008) Furniture Design – Research Based on Design Considerations

and Concepts of Aesthetics, International Furniture Conference and Exhibition,

PUTRA World trade Center, Kuala Lumpur, Organiser by Universiti Teknologi

MARA (Kelantan Branch) 28-30 July 2008 (presenter)

Page 61: ASSOC. PROF. DR. DZULKIFLI BIN AWANG - … · Post: Assistant Lecturer Employer: Faculty of Mechanical Engineering, UTM Date: August 1983 – September 1985 Post: Part Time Lecturer

61

14.4 Working Papers

1. Formation of a new course – Bachelor of Science Industrial Design in University

Technology Malaysia – submitted to Senate and Ministry of Education (1996)

2. Syllabus Draft - “Introduction to Design” (SMJ 2513) Subject for Degree in

Mechanical Engineering 4 years course. (1998)

3. Formation of a new faculty – Faculty of Design & Technology in University

Technology Malaysia – submitted to Senate and Ministry of Education (2003)

4. Formation of a new course – Master of Science Industrial Design in University

Technology Malaysia – submitted to Senate and Ministry of Education (2007)

5. New Curriculum Development – 3 Year‟s Curriculum (120 credits) - for Bachelor of

Science Industrial Design in University Technology Malaysia - submitted to Senate

and Ministry of Education (April 2007)

6. New Curriculum Development – 3 Year‟s Curriculum (109 credits) - for Bachelor of

Science Industrial Design in University Technology Malaysia - submitted to Senate

and Ministry of Education (April 2007)

14.4 Lecture Modules

1. Dzulkifli Awang (1996) Industrial Design, 1st Edition, Faculty of Mechanical

Engineering, UTM.

2. Dzulkifli Awang (1995) Industrial Design, 2nd Edition, Faculty of Mechanical

Engineering, UTM.

3. Dzulkifli Awang (2006) Studio Presentation (SRI 1032) Dept. of Design Faculty of

Mechanical Engineering, UTM

4. Dzulkifli Awang (2006) Sketching/Drawing (SRI 1012) Dept. of Design Faculty of

Mechanical Engineering, UTM

5. Dzulkifli Awang (2007) Innovation Management & New Product Development (SRI

2083) Dept. of Design Faculty of Mechanical Engineering, UTM

Page 62: ASSOC. PROF. DR. DZULKIFLI BIN AWANG - … · Post: Assistant Lecturer Employer: Faculty of Mechanical Engineering, UTM Date: August 1983 – September 1985 Post: Part Time Lecturer

62

15. EXTRA-CURRICULAR ACTIVITIES

15.1 Organisation

1) Reserve Officer Training Unit (ROTU/PALAPES)

Rank : Cadet Sergeant

Position : Platoon Sergeant

Service : July 1980 – June 1981

Unit : ROTU, MARA Institute of Technology, Shah Alam

2) Reserve Officer Training Unit (ROTU/PALAPES)

Rank : Cadet Staff Sergeant

Position : Company Quartermaster

Service : July 1981 – June 1982

Unit : ROTU, MARA Institute of Technology, Shah Alam

3) Reserve Officer Training Unit (ROTU/PALAPES)

Rank : Senior Under Officer (SUO)

Position : Detachment Commander

Service : July 1982 – April 1983

Unit : ROTU, MARA Institute of Technology, Shah Alam

4) Territorial Army (TA)

Rank : 2nd Lieutenant

Position : Platoon Commander

Service : 4 years (1983 – 1987)

Unit : 1st Battalion, Regiment 502 (TA), Ampang Camp, Kuala Lumpur

5) Territorial Army (TA)

Rank : Lieutenant

Position : Platoon Commander

Service : 4 years (1987 - 1991)

Unit : 1st Battalion, Regiment 502 (TA), Ampang Camp, Kuala Lumpur

1st Battalion, Regiment 501 (TA), Majidee Camp, Johor Bahru, Johor

6) Territorial Army (TA)

Rank : Captain

Position : Assistant Company Commander

Service : 2 years (1991 – 1996)

Unit : 1st Battalion, Regiment 501 (TA), Tebrau Camp, Tebrau, Johor Bahru,

Johor.

Page 63: ASSOC. PROF. DR. DZULKIFLI BIN AWANG - … · Post: Assistant Lecturer Employer: Faculty of Mechanical Engineering, UTM Date: August 1983 – September 1985 Post: Part Time Lecturer

63

7) Territorial Army (TA)

Rank : Major

Position : Company Commander

Service : April 1995 – April 1996

Unit : 1st Battalion, Regiment 502 (TA), Tebrau Camp, Tebrau, Johor Bahru,

Johor.

8) Territorial Army (TA)

Rank : Major

Position : Attachment Staff Officer

Service : May 1996 – July 1997)

Unit : Reserve Officers Training Unit (ROTU/PALAPES) University

Technology Malaysia, Johor

9) Territorial Army (TA)

Rank : Major

Position : Company Commander

Service : August 1997 – August 1998

Unit : 1st Battalion, Regiment 502 (TA), Tebrau Camp, Tebrau, Johor Bahru,

Johor.

10) Territorial Army (TA)

Rank : Lieutenant Colonel

Position : Commanding Officer

Service : September 1998 - present

Unit : 2nd Battalion, Regiment 502 (TA), Muar Camp, Muar, Johor.

11) Territorial Army (TA)

Rank : Lieutenant Colonel

Position : Permanent Secretary for Commanding Officers' Meeting

Service : November 1998 - present

Unit : Regiment 502 (TA), Tebrau Camp, Tebrau, Johor.

12) Territorial Army (TA)

Rank : Lieutenant Colonel

Position : Administration Exco for Territorial Commander‟s Conference 2000

Service : Organising committee (May - August 2000)

Unit : Regiment 502 (TA), Tebrau Camp, Tebrau, Johor.

13) Territorial Army (TA)

Rank : Lieutenant Colonel

Position : Parade Commander

Service : Parade Commander for TA's 43rd Anniversary parade at Ipoh Stadium

(5th- 10th/6/2000)

Unit : Regiment 502 (TA), Tebrau Camp, Tebrau, Johor.

Page 64: ASSOC. PROF. DR. DZULKIFLI BIN AWANG - … · Post: Assistant Lecturer Employer: Faculty of Mechanical Engineering, UTM Date: August 1983 – September 1985 Post: Part Time Lecturer

64

14) Territorial Army (TA)

Rank : Lieutenant Colonel

Position : Standby Parade Commander

Service : Standby Parade Commander for TA's 44th Anniversary parade at

Stadium Sultan Ahmad Shah, Kuantan, Pahang (28th June – 1st July

2001)

Unit : Regiment 502 (TA), Tebrau Camp, Tebrau, Johor.

15) Territorial Army (TA)

Rank : Lieutenant Colonel

Position : Parade Commander

Service : Parade Commander for Regiment 501 (TA) 2004 Annual Camp Opening

Ceremony Parade (30th

/9 - 15th/10/2003)

Unit : Regiment 502 (TA), Tebrau Camp, Tebrau, Johor.

16) Territorial Army (TA)

Rank : Lieutenant Colonel

Position : Parade Commander

Service : Parade Commander for Regiment 501 (TA) 2004 Training Opening

Ceremony Parade (12th- 16th/1/2004)

Unit : Regiment 502 (TA), Tebrau Camp, Tebrau, Johor.

17) Territorial Army (TA)

Rank : Lieutenant Colonel

Position : Parade Commander

Service : Parade Commander for Regiment 501 (TA) 2004 Training Opening

Ceremony Parade (16th

March 2005)

Unit : Regiment 502 (TA), Tebrau Camp, Tebrau, Johor.

18) Territorial Army (TA)

Rank : Lieutenant Colonel

Position : Parade Commander

Service : Parade Commander for Rank Investure Jawatankuasa Pendokong Askar

Wataniah Johor Ceremony Parade at Dataran Bandaraya, Johor Bahru,

Johor. (31st May, 2005)

Unit : Regiment 502 (TA), Tebrau Camp, Tebrau, Johor.

19) Territorial Army (TA)

Rank : Lieutenant Colonel

Position : Parade Commander

Service : Parade Commander for The Launching Parade of “Kompeni Perdana”

Johor State Level at Dataran Bandaraya, Johor Bahru, Johor.

23/11/2007)

Unit : Regiment 502 (TA), Tebrau Camp, Tebrau, Johor.

Page 65: ASSOC. PROF. DR. DZULKIFLI BIN AWANG - … · Post: Assistant Lecturer Employer: Faculty of Mechanical Engineering, UTM Date: August 1983 – September 1985 Post: Part Time Lecturer

65

20) Territorial Army (TA)

Rank : Lieutenant Colonel

Position : Parade Commander

Service : Parade Commander for Regiment 501 (TA) Training Opening

Ceremony Parade (11-17/3/2008)

Unit : Regiment 502 (TA), Tebrau Camp, Tebrau, Johor.

21) Territorial Army (TA)

Rank : Lieutenant Colonel

Position : Parade Commander

Service : Parade Commander for Regiment 501 (TA) Training Opening

Ceremony Parade (13-15/2/2009)

Unit : Regiment 502 (TA), Tebrau Camp, Tebrau, Johor.

22) Territorial Army (TA)

Rank : Lieutenant Colonel

Position : Parade Commander

Service : Parade Commander for JAKPAW Shooting Competition Closing

Ceremony Parade, PULADA Shooting Range (7/11/2010)

Unit : Regiment 502 (TA), Tebrau Camp, Tebrau, Johor.

23) Territorial Army (TA)

Rank : Lieutenant Colonel

Position : Parade Commander

Service : Parade Commander for Annual Camp 2010 Closing Ceremony (Mersing

Camp - 12/11/2010)

Unit : Regiment 502 (TA), Tebrau Camp, Tebrau, Johor.

24) Territorial Army (TA)

Rank : Lieutenant Colonel

Position : Parade Commander

Service : Parade Commander for Regiment 501 (TA) Training Opening

Ceremony Parade (9/1/2011)

Unit : Regiment 502 (TA), Tebrau Camp, Tebrau, Johor.

25) Territorial Army (TA)

Rank : Lieutenant Colonel

Position : Parade Commander

Service : Parade Commander for Regiment 501 (TA) Training Opening

Ceremony Parade (22/1/2012)

Unit : Regiment 502 (TA), Tebrau Camp, Tebrau, Johor.

Page 66: ASSOC. PROF. DR. DZULKIFLI BIN AWANG - … · Post: Assistant Lecturer Employer: Faculty of Mechanical Engineering, UTM Date: August 1983 – September 1985 Post: Part Time Lecturer

66

23) Territorial Army (TA)

Rank : Lieutenant Colonel

Position : Commanding Officer for 3rd

Battalion

Service : Mei 2008 - present

Unit : 3rd

Battalion, Regiment 502 (TA), Kluang Camp, Kluang, Johor.

P/S : for further detail on my involvement and contributions in TA, please refer to

attached Biodata for TA.

15.2 Community Services

1) UMNO Committee (Auditor), Taman Sri Andalas UMNO Branch, Ulu Klang,

Selangor (1986)

Contribution/service : Social welfare of the branch community, up-keeping

surau AU4, gotong-royong.

2) Industrial Design Department, School of Art & Design, MARA Institute of

Technology, Shah Alam (1987 – 1989)

Contribution/service : Part-time Lecturing

3) MCCH (Malaysian Community of Cheetham Hill) Committee, Manchester, U.K.

(1993 – 1994)

Contribution/service : Malaysian students welfare – organising social and

Religious activities, housing, etc

4) Belibis/Undan Surau Construction Committee (1997 – present)

Contribution/service : Committee formed to Organiser the construction of a

surau for the benefits of the locals

5) AARG (Automotive and Aeronautical Research & development Group), Mechanical

Engineering UTM (1996-1997)

Contribution/service : Participation in exhibition, video recording requested by

Page 67: ASSOC. PROF. DR. DZULKIFLI BIN AWANG - … · Post: Assistant Lecturer Employer: Faculty of Mechanical Engineering, UTM Date: August 1983 – September 1985 Post: Part Time Lecturer

67

schools, video recording firms, sports Organisers, local

authorities.

6) Bandar Tenggara Secondary School, Bandar, Tenggara, Kulai Johor (1997)

Contribution/service : Design talks for Design Motivation Course

(4th November 1997)

7) British Petroleum (BP), TV3 and Ministry of Education (1997)

Contribution/service : Judging Panel for “BP Challenge” Semi-final held at

Plentong BP Station, Johor (13th September 1997)

8) British Petroleum (BP), TV3 and Ministry of Education (1997)

Contribution/service : Judging Panel for “BP Challenge” Final held at Education

Auditorium, Ministry of Education, Bukit Kiara, Kuala

Lumpur (22nd October 1997)

9) Bahagian Kemahiran MARA, Kuala Lumpur (1998)

Contribution/service : Judging Panel (Head of Judge) for IKM Design

Competition held at IKM, Sungai Petani, Kedah (14-15

August 1998)

10) School of Professional and Continuing Education (SPACE) (1995, 1996, 1997

1998)

Contribution/service : Lecturing in Industrial Design subject (SMM 3512) and

Product Design (SMM 5523)

11) Sek. Men. Rendah Taman Universiti (1999)

Contribution/service : Design Talks on Industrial Design (7/1/99)

12) Sek. Men. Seri Perling, Taman Perling, Parents & Teachers Association (April 1999

– May 2000)

Contribution/service : Committee Member

Page 68: ASSOC. PROF. DR. DZULKIFLI BIN AWANG - … · Post: Assistant Lecturer Employer: Faculty of Mechanical Engineering, UTM Date: August 1983 – September 1985 Post: Part Time Lecturer

68

13) Sek. Men . Seri Perling, Taman Perling, Surau Building Committee (April 1999 –

May 2000)

Contribution/service : Committee Member - Surau design and fund collection .

14) Kolej Islam YPJ, Johor (Oct 1999)

Contribution/service : Talks on "Penghayatan Kemerdekaan"

15) Education Technology Department, Ministry of Education, Bukit Kiara and RTM2

(Oct 1999)

Contribution/service : Panel for "Bicara" live telecast educational

program

16) Sek. Men. Seri Perling, Taman Perling, Parents & Teachers Association (April 2000

– May 2001)

Contribution/service : Committee Member

17) Sek. Men . Seri Perling, Taman Perling, Surau Building Committee (April 2000 –

May 2001)

Contribution/service : Committee Member - Surau design and fund collection .

18) Sekolah Kebangsaan Taman Perling, Parent & Teachers Association (April 2000 –

2001)

Contribution/service : Committee Member

19) Kolej Ugama Sultan Zainal Abidin (KUSZA), Kuala Terengganu, Terengganu

(February 2001)

Contribution/service : Talks on “ Industrial Training” for Diploma in Industrial

Design‟s Students.

20) Kolej Siswa Desa Skudai, Universuti Teknologi Malaysia (19th May 2001)

Page 69: ASSOC. PROF. DR. DZULKIFLI BIN AWANG - … · Post: Assistant Lecturer Employer: Faculty of Mechanical Engineering, UTM Date: August 1983 – September 1985 Post: Part Time Lecturer

69

Contribution/service: : Talks on “ Student Orientation Week” for UTM‟s new

intake

21) Sek. Men . Seri Perling, Taman Perling, Surau Building Committee (April 2002 –

May 2003)

Contribution/service : Committee Member - Surau design and fund collection .

22) Sekolah Kebangsaan Taman Perling, Parent & Teachers Association (April 2002 -

2003)

Contribution/service : Committee Member

23) Sek. Men. Seri Perling, Taman Perling, Parents & Teachers Association (April 2002

– May 2003)

Contribution/service : Committee Member

24) Sek. Men. Seri Perling, Taman Perling, Parents & Teachers Association (2002)

Contribution/service : Design a Parents & Teachers Association Logo and

Letterhead

25) Bahagian Kemahiran MARA, Kuala Lumpur (2002)

Contribution/service : Judging Panel for IKM Design

Competition held at IKM, Jasin, Melaka

(26-27 October 2002)

26) The University of Science of Malaysia, Changkat Minden, Penang (8 Mac, 2003)

Contribution/service : Committee to discuss on Setting up a new course

“Bachelor of Fine Arts (Industrial Design)” for Art Study

Center (Pusat Pengajian Seni) USM

27) Sek. Men. Seri Perling, Taman Perling, Parents & Teachers Association (May 2003

– April 2004)

Page 70: ASSOC. PROF. DR. DZULKIFLI BIN AWANG - … · Post: Assistant Lecturer Employer: Faculty of Mechanical Engineering, UTM Date: August 1983 – September 1985 Post: Part Time Lecturer

70

Contribution/service : Chairman

28) Sek. Men . Seri Perling, Taman Perling, Johor

Contribution/service : Talks on “ Industrial Design Education and Prospect” in

conjunction with Johor School Science Week (22 April,

3003)

29) The University of Science of Malaysia, Changkat Minden, Penang (17 July, 2003)

Contribution/service : Committee to discuss on Setting up a new course

“Bachelor of Fine Arts (Industrial Design)” for Art Study

Center (Pusat Pengajian Seni) USM

30) Bahagian Kemahiran MARA, Kuala Lumpur (2003)

Contribution/service : Judging Panel for IKM Design & Innovation

Competition held at Malaysian Institute of Aviation

Technology (MIAT), Sepang, Selangor

(4-5 October 2003)

31) Persidangan Kebangsaan Pengetu-Pengetua Sekolah Malaysia Johor Bahru (2004)

Contribution/service : Forum Panel Members - Education Form “ Guru

Berkualiti Pemangkin Kegemilangan” organized by

Persidangan Kebangsaan Pengetu-Pengetua Sekolah

Malaysia Johor Bahru, at Islamic Center, Johor bahru,

Johor ( 26 June 2004)

32) Universiti Teknologi Tun Husien Onn, Batu Pahat (4th

April 2007)

Contribution/Service : Talks on “The Role of Patent in Design” in Conjunction

Of Faculy of Engineering Invention Day (Hari Reka

Cipta

33) Kolej Perdana, Universiti Teknologi Malaysia (19th May 2007)

Contribution/service : Talks on “ Industrial Design – Education & Prospects” for

Secondary Schools in conjunction with Kolej Perdana‟s

Page 71: ASSOC. PROF. DR. DZULKIFLI BIN AWANG - … · Post: Assistant Lecturer Employer: Faculty of Mechanical Engineering, UTM Date: August 1983 – September 1985 Post: Part Time Lecturer

71

Open Day.

34) Ceramah Rekabentuk/Rekacipta, Fakulti Pendidikan (11th Marc 2011)

Contribution/service : Talks on “Industrial Design Course in Living Skills

Programme” organized by Faculty of Education, UTM

35) Ceramah Rekabentuk/Rekacipta, Fakulti Pendidikan (3rd

April 2011)

Contribution/service : Talks on “The Contributions of industrial Design in

organized by Faculty of Education, UTM

15.3 Sports

UTM‟ Sports Club : Member (1986 – present)

Hockey : Represent Department and Faculty (1986 – 1987, 1989)

Shooting : Represent Regiment 502 (TA) in Rifle M16 Falling Plate

Competition (1987)

: Represent Regiment 502 (TA) in GPMG Group Shooting (1987)

: UTM in Pistol Shooting Competition held at UUM (1996)

: Represent ROTU, UTM in Pistol Shooting Competition held at

UPM (1996)

: Represent 1st Battalion in Rifle M16 Falling Plate Competition

(1998)

: Represent 2nd Battalion in Rifle M16 Falling Plate Competition

(1999)

: Represent 2nd Battalion in Pistol Falling Plate Competition

(1999)

: Represent Regiment 501 (TA) in Rifle M16 Falling Plate

Competition (2000)

: Represent Regiment 501 (TA) in Pistol Falling Plate Competition

held in Kuantan (2001)

: Represent Regiment 501 (TA) in Rifle M16 Falling Plate

Competition in Kuantan (2001)

: Represent Mechanical Engineering Faculty in Rifle M16 Falling

Plate Competition at UTM‟s Close Shooting Competition at

PULADA, Ulu Tiram, Johor (2003)

: Represent Mechanical Engineering Faculty in “Campus Run”

(veteran category) in conjunction with UTM‟s Family Day (2003)

: Represent Mechanical Engineering Faculty in Novelty Pistol

Competition at UTM‟s Close Shooting Competition at

PULADA, Ulu Tiram, Johor (2004)

Page 72: ASSOC. PROF. DR. DZULKIFLI BIN AWANG - … · Post: Assistant Lecturer Employer: Faculty of Mechanical Engineering, UTM Date: August 1983 – September 1985 Post: Part Time Lecturer

72

: Represent Department (Copa Team) in Bowling Competition at

Skudai Parade (2004)

c) Archery : Member - Archery Club, UTM (1997 – Present)

15.4 General Contributions

1. Official Neck Tie design for University Technology Malaysia (1988)

2. FME Manual and FME Bulletin Cover Design (1987, 1988, 1989, 1990, 1991)

3. Design and Fabrication of a FME‟s sign board at Block H, UTM, Jalan Gurney

(1987)

4. Brochure‟s Design for FME Degree and Diploma Course (1990)

5. Brochure‟s Design for FME/SPACE Degree and Diploma Course (1996)

6. Brochure‟s Design Bachelor of Science Industrial Design, FME (1997)

7. Participation in Technological Innovation Exhibition (ITEX‟96) at MBJB hall, Johor

Bahru (1996)

8. Judging Panel for Technological Design Competition Organized by PETERA (1998)

9. Interior Design for Proposed “FME‟s Example Lecture Room”, FME (1998)

10. Participation in Mechanical Engineering Faculty‟s Exhibition held at UTM‟s

Administration Building Foyer (1998)

11. Preparation of Teaching Materials for SMJ 2513 ( 1st Stage – Syllabus and

Scheduling) (1998)

12. Preparation of Teaching Materials for SMJ 2513 (2nd Stage – Subject Content)

(1999)

13. Preparation of Working Paper for SRI degree course recognition from JPA (1999)

14. Participation in INATEX 99 exhibition (1999)

15. Facalitator for Design Workshop Rakan Reka Cipta Johor (1999)

16. Head of Judging Panel for Design Competition in conjenction with Hari Inovasi 99

Organized by Student Union UTM (1999)

17. Participation in "Pasar Seni" Exhibition, Organiser by JETRO, Johor Bahru, Johor

(1999)

18. Participation in Science & Technology Week Exhibition Johor , Organiser by

Ministry of Science and Environment Johor and UTM (1999)

19. Participation in R&D Exhibition in conjunction with Prime Minister's Visit to UTM,

Organiser by Research Management Center UTM. (1999)

20. Chairman for PSM (Projek Sarjana Muda) Seminar (March, 1999)

21. Chairman for ATMA's PSM Seminar (March,1999)

22. Chairman for PSM (Projek Sarjana Muda) Seminar (April, 2000)

23. Chairman for PSM/SPACE Kulim Hi-Tech Seminar (May, 2000)

24. Chairman for FME Colloquium (17/7/2000, 13/9/200)

25. Chairman for PSM (Projek Sarjana Muda) Seminar (Nov, 2000)

26. Interviewer for B.Sc Industrial Design Candidates (new intake) (1997 - present)

27. Participant and talks for Markas Latihan Tentera Darat TQM presentation and

Page 73: ASSOC. PROF. DR. DZULKIFLI BIN AWANG - … · Post: Assistant Lecturer Employer: Faculty of Mechanical Engineering, UTM Date: August 1983 – September 1985 Post: Part Time Lecturer

73

competition. (6th October 2000)

28. Organising Seminar on “RS Component” for FME‟s Staff and Students (11th July

2001)

29. Organising Seminar on “RS Component” for FME‟s Staff and Students (9th August

2002)

30. Participate in “Johor International Kite Festival” Pasir Gudang (April 2002)

31. Participate in exhibition undertaken by Kolej Siswa Desa Skudai at Teluk Intan,

Perak (Mei 2002)

32. Participate in exhibition for “Program Operasi Khidmat Rakan Masyarakat dan

Pendidikan undertaken by Persatuan Pengurusan Teknologi, UTM (October 2002)

33. Participate in Industrial Design Road Show at Sokolah Menengah Taman Universiti

in conjunction with the school “Co-Curriculum Day”(28 June 2003)

34. Participate in UTM‟s Courses Promotional Show and Talk at Sokolah Menengah

Teknik Perdagangan Johor Bahru, Johor. (10th

April 2004)

35. Participate in Industrial Design Road Show at Seminar Hall, FME (21-23 July 2004)

36. Design of a Giant Hibiscus Balloon and Sculpture in conjunction with the 48th

“National Day” Month Celebration in UTM (2005)

16. HONOURS AND AWARDS

1) Dean‟s List Award (1980/81)

Department of Industrial Design, School of Art & Design

MARA Institute of Technology, Shah Alam, Selangor

Awarding Body : MARA Institute of Technology, Shah Alam, Selangor

2) Dean‟s List Award (1982/83)

Department of Industrial Design, School of Art & Design

MARA Institute of Technology, Shah Alam, Selangor

Awarding Body : MARA Institute of Technology, Shah Alam, Selangor

3) Best Student Award (1983)

School of Art & Design, MARA Institute of Technology, Shah Alam, Selangor

Awarding Body : Federated Malaysian Manufacturers (FMM) and MARA

Institute of Technology

Page 74: ASSOC. PROF. DR. DZULKIFLI BIN AWANG - … · Post: Assistant Lecturer Employer: Faculty of Mechanical Engineering, UTM Date: August 1983 – September 1985 Post: Part Time Lecturer

74

4) Best Student Award (1983)

Department of Industrial design, School of Art & Design, MARA Institute of

Technology, Shah Alam

Awarding Body : Selangor Pewter Malaysia BHD and MARA Institute of

Technology

5) Civil Service Department Scholarship Award for Master‟s Degree (Skim Latihan

Akademik Bumiputra- SLAB) (1984)

Awarding Body : Civil Service Department

6) Best Student Award (1986)

Master Degree Course (Master of Arts with Distinction), Industrial Design

Department, Manchester Polytechnic, Manchester, United Kingdom

Awarding Body : Manchester Polytechnic, Manchester, United Kingdom

7) First Prize for Gate Design Competition (1982) for Perbadanan Kemajuan Pertanian

Selangor (PKPS)

Awarding Body : Perbadanan Kemajuan Pertanian Selangor (PKPS)

8) Civil Service Department Scholarship Award for Doctrate‟s Degree (Skim Latihan

Akademik Bumiputra- SLAB) (1991)

Awarding Body : Civil Service Department

9) Research Award (1997) (Group Category) University Technology Malaysia

Awarding Body : University Technology Malaysia.

10) Universiti Teknologi Malaysia Merit Award 2000

Awarding Body : University Technology Malaysia.

Page 75: ASSOC. PROF. DR. DZULKIFLI BIN AWANG - … · Post: Assistant Lecturer Employer: Faculty of Mechanical Engineering, UTM Date: August 1983 – September 1985 Post: Part Time Lecturer

75

11) Pingat Ibrahim Sultan (P.I.S. II) (2002)

Awarding Body : The State Government of Johor.

12) Pingat Pita Semat (Clasp) (2002)

Awarding Body : The Ministry of Defence

13) Pingat Kebaktian (P.K.) (2003)

Awarding Body : The Federal Government of Malaysia.

14) Darjah Ahli Mahkota Perak (A.M.P.) (2003)

Awarding Body : The State Government of Perak

15) Anugerah Khidmat Bakti (Long Service Award) (2004)

Awarding Body : Universiti Teknologi Malaysia.

16) Kesatria Mangku Negara (K.M.N.) (2005)

Awarding Body : The Federal Government of Malaysia.

17) Universiti Teknologi Malaysia Excellence Service Award 2006

Awarding Body : University Technology Malaysia.