ASSIGNMENT WEBSITE1. INSERT TABLETo insert a table:1. Click the Insert Table tool,.2. Press and drag the Table Size pop-up box (see example below) to select the number of rows and columns you want in your table. When you release the mouse button, a table of the proportions selected will display in your document.

Table Size Dialog Box.The table will show on the Web page during development with dotted lines (see example below) so that you can more easily work with the table. The dotted lines indicate that the lines will NOT display on the Web.

Sample Working Table GridWorking with TablesNOTE: Any time you wish to work with a table, you must click within the table to place the cursor inside the table. Otherwise, you will find that the Table menu options are "grayed out" and unavailable to you.To adjust the column widths and row heights, point your mouse at the border you wish to adjust. Move the mouse very slowly until you see the cursor change to a double headed arrow (it's quite sensitive; move it slowly), then press and drag to the new dimensions.

To enter data into the table, click your mouse cursor in a cell and begin typing.To move from cell to cell, press the key on your keyboard or click the mouse cursor in the cell to which you want to move.To add an additional table row at the end of the table, position your cursor in the lower, right corner cell and press the key on your keyboard.To select a table/column/row/cell, click in the row or column that you wish to select, then from the menu choose TABLE : Select : Table/Column/Row/Cell (whichever one you wish to select).To insert a row or column, click in the row or column beside which you wish to make an insertion. From the menu, choose TABLE : Insert : Rows or Column. From the dialog box, select either row or column. The example below has Columns selected; therefore, the Location indicates a Left of selection or a Right of selection insertion option. If Rows had been selected, the Location would have adjusted to show Above or Below options.

Insert Rows or Columns Dialog BoxTo delete individual cells, complete rows or complete columns, position your cursor in the appropriate location (in the cell, in the row, or in the column), then select the element (as previously described) that you want to delete. After the element is selected, from the menu, choose TABLE : Delete Cells.To merge cells, select the cells as previously described, then from the menu, choose TABLE : Merge Cells.To split cells, place the cursor in the cell you wish to split. Then from the menu, choose TABLE : Split Cells. In the dialog box (see example below), choose to split the cell into columns or into rows, and specify the number of columns or rows you wish.

Split Cells Dialog BoxTable Toolbar

Table ToolbarThe Table Toolbar gives you easy access to many of the same functions that you can perform through the Table menu. Depending upon how the FrontPage options are set on your computer, the Table Toolbar may display anytime you are working with tables. If it doesn't and you want it to, from the menu choose VIEW : Toolbars : Tables.In addition to the table functions that you can access through the menu, you can: Add a table or additional cells within a table. Click the pencil icon,. Press and drag your cursor (which will look like a pencil) vertically or horizontally to draw a new cell within your table. Delete a cell wall from an existing table. Click the eraser icon,. Press and drag your cursor (which will look like an eraser) over the cell border (you will see the lines that will be deleted as red) you want to delete; when you release the mouse, the borders will be deleted.To "turn off" either the pencil or the eraser tool, press the key on your keyboard. Distribute columns or rows evenly. After you have adjusted the table borders several times, you may find that you simply want them back, evenly arranged to "start over." Highlight the row or column that you want to evenly distribute, then click the appropriate "distribute evenly" icon,. Size the table according to the contents within it. Tables are always inserted full-width. Rather than try to guess how wide the table must be to accommodate the contents, click the Auto Fit icon,.Table & Cell PropertiesYou can set table properties such as background and border colors, spacing, and text alignment in the Table Properties. Make sure that your cursor is within the table. From the menu, choose TABLE : Table Properties (see example below).

Table Properties Dialog BoxIn the Table Properties dialog box, you can make many choices about the table, but there are only a few that you will normally need to do anything with: Layout tools. Layout tools enable you to create specific layouts for page design. Size. This option allows you to specify the number of rows and columns you wish your page to have. Access the table properties after you have inserted a table, then make selections in the Size option to have it create the appropriate dimensions. Layout.

Alignment. This option will position the table on the Web page. Width. This option specifies the width of the overall table. Setting the table width in a percentage is more flexible from a design point of view (tables with fixed pixels sizes do not adjust with the dimensions of the user's browser window and can cause a horizontal scroll bar if the table is wider than the browser window).

NOTE: FrontPage has quirk, in that if you press and drag to adjust the size of a table's cell or margins, it often changes any percent width setting to a specific number of pixels. My recommendation is that you set the size of your table and the cells within it, then enter the table properties dialog box and change the pixel setting to percent (just click the other radio button). Float. This option determines the table's position in relation to other objects on the page. When Float is set to default, other objects appear either below or above the table only. Height. In general, you should not specify a height for your table. Let it adjust according to the needs of the table as displayed on your reader's monitor. Otherwise, you may end up with lots of "white space" that is not necessary. Cell padding & cell spacing. Cell padding is the amount of space between the text and the wall of the cell. Cell spacing is the width of the actual cell wall. In the two tables below, notice how the cell padding and cell spacing values effect the appearance of the table (NOTE: the HTML code uses "cellpadding" and "cellspacing" for the terms):This table hascellpadding of 15 pixels

and cellspacing of 0 pixels.Notice how far the words are from the edge of the cell.

This table hascellpadding of 0 pixels

and cellspacing of 15 pixels.Notice the width of the cell walls and how close to the cell walls the text is.

Borders. Border size defines the width of the table border in pixels. It is important to remember that some older browsers are unable to display a border color. Background. This option sets the color for the entire table. If you want to selectively color the table cells, use the Cell Properties, rather than Table Properties.

2. TEXT COLOURApplying Color to Text: Menu Option1. Select the text you want to color2. From theFormatmenu, selectFont...TheFontdialog box appears.3. From theColorpull-down list, select the desired colorHINTS:To see a wider variety of colors or create your owncustom color, selectMore Colors....To return your text to black, repeat steps 1-3 and selectBlack4. ClickOKApplying Color to Text: Toolbar Option1. Select the text you want to color2. On theFormattingtoolbar, from theFont Colorpull-down list, select the desired colorHINTS:To see a wider variety of colors or create your owncustom color, selectMore Colors....To return your text to black, repeat step 2 and selectBlackUsing Additional Color OptionsUsing a custom color allows you to either choose one of 48 web-safe colors or create your own color.Choosing a Basic Color1. Select the text you want to color2. From theFormatmenu, selectFont...TheFontdialog box appears.3. From theColorpull-down list, selectMore Colors...TheMore Colorsdialog box appears.4. ClickCUSTOM...TheColordialog box appears.

5. From the hexagonal palette, select a desired colorThe new color appears in theNewbox.NOTE:For more information, refer toEntering Hex Colors.6. ClickOKThe new color you selected appears in theColorpull-down list.7. ClickOKThe color is now applied to the selected text.Creating a Custom Color1. Select the text you want to color2. From theFormatmenu, selectFont...TheFontdialog box appears.3. From theColorpull-down list, selectMore Colors...TheMore Colorsdialog box appears.4. ClickCUSTOM...TheColordialog box appears.

5. UnderCustom colors, select an empty box6. Using theColor SpectrumandGradient Bar,a. In theColor Spectrumbox, click a desired colorb. On theGradient Bar, click and drag the left arrow up and down until you reach a desired colorThe desired color appears in theColor/Solidbox.HINTS:The color becomes lighter as the arrow moves up. The color becomes darker as the arrow moves down.You may use theHue,Sat,Lum, Red,Green, andBluetext boxes to create a color by typing specific values. For instruction on how to accomplish this, refer toSelecting Colors by Values.7. ClickADD TO CUSTOM COLORSThe empty box you selected now contains the new color.8. OPTIONAL:Repeat steps 5-7 as necessary9. ClickOKYou are returned to theMore Colorsdialog box.10. ClickOKThe color you selected appears in theColorpull-down list.11. ClickOKThe color is now applied to the selected text.

3. WHAT IS A DECLARATION AND GIVE EXAMPLEIncomputer programming, adeclarationspecifies properties of anidentifier: it declares what a word (identifier)means.[1]Declarations are most commonly used forfunctions,variables,constants, andclasses, but can also be used for other entities such as enumerations and type definitions.[1]Beyond the name (the identifier itself) and the kind of entity (function, variable, etc.), declarations typically specify thedata type(for variables and constants), or thetype signature(for functions); types may also include dimensions, such as for arrays. A declaration is used to announce the existence of the entity to thecompiler; this is important in thosestrongly typedlanguages that require functions, variables, and constants, and their types to be specified with a declaration before use, and is used inforward declaration.[2]The term "declaration" is frequently contrasted with the term "definition",[1]but meaning and usage varies significantly between languages; see below.Declarations are particularly prominent in languages in theALGOLtradition, including theBCPLfamily, most prominentlyCandC++, and alsoPascal.Javauses the term "declaration", though Java does not have separate declarations and definitions.

THESIS DECLARATION/ FRONT PAGE Fill in the form before submitting the hard copies of your thesis. Print the receipt and use it as front page when submitting your thesis.The cover must be on the front either as a loose sheet of paperor bound with the thesis. If you need an advance approval (forhndsgodkendelse) for your unemployment benefit office, you must submit the appropriate form (see website of your unemployment benefit office) together with a stamped and addressed envelope. We recommend that you write your own address on the envelope, and not the address of the unemployment Cashiers Office.If your Master's thesis and appendix takes up more than 100 MB you will not be able to upload it. Instead, you must upload thesis alone, and further enclose appendix on a USB flash drive or CD-ROM upon submission of the physical copies.Send the form to the thesis administration by pressing the Send thesis title button at the bottom of the form. A copy will be sent to you by e-mail. If you do not receive an e-mail, please fill in and send the form again. Please remember to check your postfolder unwanted email/spam, as our e-mail could end up there.

We recommend you use Internet Explorer when you fill in online forms.

4. WHAT IS NAVIGATION MENU AND GIVE EXAMPLENavigation View in FrontPage offers a useful overall view of the structure of your website. Using navigation view, you can easily see and understand the relationships between your web pages. Not only are you able to see your website's structure, but you can also add new web pages in this view.To work in navigation view in FrontPage, click Views > Navigation.

You should now see a graphical representation of your website, showing where each web page exists in relation to the other pages. If you can't see anything in this view, click on your index.htm page from the folder list and drag it over to the empty navigation pane. You can build pages off of this page which is your main or "home" page.Using this view, you may drag pages from your folder list into the navigation view to build a navigation structure. Pages must be in the navigation structure for FrontPage to generate navigation bars.Deleting pages is intuitive: right-click on a particulat page and select Delete. You can also rename pages by rightclicking on them and selecting Rename.The pages that are on the top level of your hierarchical structure are called "top level pages". If you want to, when you insert navigation bars you can indicate that they should only point to these top level pages. Usually, webmasters put frequently visited pages here to make it easier for your visitors to find them. Also, the main entry points to exploring the deeper recesses of your site are good pages to go here.Navigation View - Different LevelsLet's look at some of the terminology that FrontPage uses, regarding the different levels of web pages. The level of pages directly beneath a page is the "Child Level" of the page. The level above a page is the "Parent Level" of the page. The page in the Parent Level that is directly connected to the page is the "Parent Page." The pages next to the page are known as "Same Level" pages.

5. INSERT BACKGROUNDS COLOURYou can add a solid colour to the background of your table or even add an image as the background in Microsoft FrontPage. Having a background that stands out can help to draw the viewer's attention to the table, but care must be taken to use colours that are easy on the eye!To add a background colour or image to your table, follow these steps: Right click within any part of the table and select table properties from the menu. To add a background colour, click on the down arrow and choose a colour that you like. If you want to use an image check theuse picture backgroundbox. If you are going to use an image as the table background, click on the browse button and navigate to the image that you want to use. Click OK to apply the background.There are many other options that you can use to control the display of your table, and they will be covered in a future tutorial.

6. SET PAGE TO CENTERIn FrontPage you can adjust the alignment of your tables to make the web page appear neater. To set the table's alignment, right click inside the table and select Table Properties. In the Table Properties dialogue box, click on the down arrow next to alignment and make your selection. You can choose any one of the following: default left right center justify

7. INSERT LAST UPDATE1.First go to insert and open date and time

2.then adjust the date and time format and then press okay

8. PAGE BRAKE1.FIRST HIGLIGHT THE WORD THAT WANT TO PAGE BRAKE THEN GOTO THE INSERT AND CLICK BRAKE

2.THEN THIS IS THE RESULT

9.CREATE MARQUEE TEXT 1. InPage View, place the insertion point on a blank line of text, or select and highlight the text that you want to display in the marquee2. From theInsertmenu, selectWeb Component...

1. TheInsert Web Componentdialogue box is displayed.From theComponent typebox, selectDynamic EffectsFrom theChoose an effectbox, selectMarqueeClickFinish

1. TheMarquee Propertiesdialogue box is displayed.

1. In theTextbox, enter the line of text that the marquee should display (If you highlighted text on the page that will already appear in the box).1. Adjust the values for direction, movement speed, behaviour, size, repetitions, and background colour.1. Click OK1. To format the background color, font etc, click on theStylebutton at the bottom, then play around with the settings.

9. Note:The best way to setup a marquee is to create one and preview it in Internet Explorer, trying various effects and colour schemes until it matches your needs.

10. HOW TO SAVE AND RUN WEB1.First go to the save icon

2.then after save the press f12 and the the project will run