www.mimsafe.se

MULTICAGEdouble

ASSEMBLY INSTRUCTIONS

IMPORTANT

GENERAL

MultiCage is made for transport of dogs in vehicle. The cage is made of splinter proof and energy absorbing materials.It has undergone rigorous crash tests it’s design-protected and made of galvanized steel painted with a very weather-resistant polyurethane paint suitable for its use. the design reduces the risk of injury and the choice of material eliminates the risk of splitting damage and gives the cage its energy absorbing characteristics. the product comes with ratchets and anchoring hooks with quick lock to simplify the installation in the vehicle. Practical retractable lifting handles and lockable door with gas spring helps holding the door open when needed.

BEFORE YOU BEGIN

Ensure that you work on a flat surface. If the cage is assembled indoor protect the floor with a blanket or carpet to avoid damaged during assembly.Read the instruction carefully before you begin, it gives you a better understanding when you work step by step during the assembly.You can assemble the cage by yourself but it helps a lot to be two during some of the assembly steps.

CLEANING

Use a soft cloth with wather and mild soap.

RECOMMENDED AREA OF USE

MultiCage is suitable for transport vehicles, motorhomes, vans and pickups with proper cargo loops.It’s not intended to be installed behind the rear seat in a station waggon.If the cage is installed behind the rear seat in a VAN, make sure you don’t interfere with the vehicles deformation zone.

The story of MIMsafe

For more than 30 years, MIMsafe has worked with functional design and manufacturing of safety products for the modern automotive industry. With documentation from hundreds of crash tests and in close collaboration with the major car manufacturers, safe products have been developed and transformed into knowledge. Under the well-known brand name MIMsafe, we have become the leading manufacturer of crash tested and crush proofed non-whiplash dog cages all over the world.

CRASH TEST

This model is crash tested at Rise Research Institutes of Sweden ABFrontal Impact test of a Multi Cage dog crate according to ECE Regulation No. 17Test protocol is available from the manufacture on request.

MANUFACTURER

MIM Construction ABMyren 125SE-462 94 FrändeforsSweden

+46 10 55 00 450info@mim.sewww.mimsafe.com

DAILY INSPECTION

• Make sure the dog cage is intact• That there is no sharp edges• That the door lock works• Check that it is attached to the vehicle’s cargo

loops

G A

B

D

H

C

I

E

J

F

2X6X 8X8XM-VBM6x12FZBM-VBM6x45FZB M-MM6MHM-6FZBM-BR6,4x12x1S

BAG

2XM-SM6x14IA

6XM-SM6x45-IK

2X 2XM-B1687-6SLD M-SFF206M622S

BAG

INCLUDED TOOLS

1X 1XALLEN KEY DRIVER Combination spanner

4X4X 4XM-BR8x19x1,5SM-460641I M-VBM8x20S88

4X4X4XM-460641DM-MM6NySM-SM6x55-IK

rubber

28XM-SM6x14IA

4XM-10520IKP1915-17S

plastic end caps

6254C - 8X6260C - 12X6275C - 20X

BAG

6254M6260M6275M

Product no No of items

2X

E Divider anchor

6254S6260S6275S

Product no No of items

2X

F Divider anchor

6254A6260A6275A

Product no No of items

1X

A Floor

6254N6260N6275N

Product no No of items

4X

H Frame bar

6260P

Product no No of items

4X

I Handle

6260R

Product no No of items

4X

J Anchor

6254T6260T6275T

Product no No of items

2X

K Locking plate

6254E6260E6275E

Product no No of items

1X

B Roof

6254J6260J6275J

Product no No of items

1X

C Divider panel

6254C6260C6275C

Product no No of items

2X

D Sidebars G Door section

6254I6260I6275I

Product no No of items

2X

IMPORTANT

Notice the triangle mark, indicates this side up!

1STEP

A

Floor

D

Sidebars

Use a screw driver to open this clip if needed.This is only a help for assembly and have no

influence on the safety of this product.

4X

CLICK!

2STEP

F

F

Divider anchors

Divider anchors

C

Divider panel

IMPORTANT

If you don’t want to use the divider panel continue to step 5

3STEP

4STEP

2XM-SM6x14IA

6XM-SM6x45-IK

1XALLEN KEY 4

2X 2XM-B1687-6SLD M-SFF206M622S

5STEP

2X6X 8X8XM-VBM6x12FZBM-VBM6x45FZB M-MM6MHM-6FZBM-BR6,4x12x1S

BAG

FK

E

F

Divider anchorsLocking plates

Divider anchors

Divider anchors

IMPORTANT

Follow this step only if you choose not to install the divider

1XCombination spanner

6STEP

G

Door sections

STEP-1

STEP-2

G

Door section

A

Floor

7STEP

90

2X

IMPORTANT

Gently insert all the screws before tightening

8XM-SM6x14IA

1XALLEN KEY 4

8STEP

4X

CLICK!

BRoof

ROO

F-D

OO

R P

OSITIONING

D

B

G

Sidebar

Roof

Door

B Roof

90

9STEP

12XM-SM6x14IA

IMPORTANT

Gently insert all the screws before tightening

10STEP

11STEP

H Handle

H

Frame bars

4X

4X

4X4X

M-460641D

M-MM6NySM-SM6x55-IK

rubber

8XM-SM6x14IA

12STEP

13STEP

4X

4X

JAnchor

4X

4X

4XM-BR8x19x1,5S

M-460641I

M-VBM8x20S88

IKP1915-17S

plastic end caps

6254C - 8X6260C - 12X6275C - 20X

www.mimsafe.seMultiCage double Edition 2019-11

4X

14STEP

Where to place the MultiCage

IMPORTANT

All the FOUR ratchet strapsmust be looped twice

12”300mm