Upload
others
View
4
Download
0
Embed Size (px)
Citation preview
MODEL/MODELO: 1625611
WM.COM
INSTRUCCIONES DE ARMADOASSEMBLY INSTRUCTIONS
TM
ATTENTIONDO NOT RETURN
TO THE STOREContact
MD Sports Customer Service
* For additional resources and FrequentlyAsk Questions, please visit us at
themdsports.com
ATENCIÓN
ContactoMD Sports
NO DEVOLVERLOA LA TIENDA
Servicio al Cliente* Por mayor información y Preguntas
Frecuentes, favor visitarnos en themdsports.com
EspañolEnglish
GARANTÍA LIMITA DE 90 DIASLIMITED 90 DAYS WARRANTY
(Continúe en la siguiente página.) www.themdsports.com1625611 1(Continued on the next page.)
This product is covered by a limited warranty that is effective for90 days from the date of purchase. If, during the limitedwarranty period, a part is found to be defective or breaks, wewill offer replacement parts at no cost to you, the customer. Theonly exceptions to the warranty include mainframes, table tops,playing surfaces, batteries or tools.
The above warranty will not apply in cases of damages due to improper usage, alteration, misuse, abuse, accidental damage or neglect.
This Limited Warranty gives you specific legal rights and you may also have other rights which vary from one State (province) to another.
A PURCHASE RECEIPT (or other proof of purchase) will berequired before any warranty service is initiated. For allrequests for warranty service, please feel free to contact ourConsumer Service Department at :
WEBSITE: www.themdsports.com
Please be aware of your product’s Limited Warranty for the return/refund policy from the store, We, at Medal Sports, can not handle the product which is out of product’s limited warranty since we only provide available parts. Thank you!
PLEASE CONTACT US BEFORE RETURNING THE PRODUCT TO THE STORE.
1 - Please leave your name, address, phone number, model number, parts needed on the answering machine if there is no attendant. Failure to do so will result in a delay in shipping parts to you.
2 - Please review the replacement parts list and make sure that you have all of your parts before beginning assembly. For questions that may arise or for missing/damaged parts, please contact us.
3 - Since you build all tables upside down, please inspect tabletops or playing surfaces right away before putting together, all damaged table tops/playing surfaces need to be returned to the store. Please contact with retailer for their return policy.
1 - Por favor deje su nombre, dirección, número telefónico, número de modelo, partes necesarios a la máquina contestadora si no fuera atendido. El fracaso de hacer así le causará un retraso del envío de partes.
2 - Por favor revise la lista de piezas de repuesto y asegúrese de que tiene todas las piezas antes de comenzar el montaje. Para preguntas o para piezas que no se hayan incluidos/dañadas, por favor pongase en contacto con nosotros.
3 - Ya que usted construye todas las mesas al revés, por favor inspeccione las partes superiores de mesa o superficies de juego enseguida antes de poner juntos, que todo tableros de mesa/superficies dañado tiene que ser devuelto a la tienda. Por favor comunique con el minorista por su política de devolución.
¡AVISO!NOTICE!
STAPLE YOUR RECEIPT HERE / GRAPA SU RECIBO AQU
Este producto está cubierto por una garantía efectiva de 90 días apartir de la fecha de su compra. Durante el periódo límite de lagarantía, si una parte defectuosa o quebrada es encontrada, nosotrosofreceremos una reparación o un reemplazo de la partes sin ningúncosto para ud, nuestro cliente. Las únicas excepciones de la garantíaincluyen unidad principals, tableros de mesa, superficies, pilas oherramientas.
La susodicha garantía no se aplicará en los casos de daños y perjuicios debido al uso impropio, la alteración, el mal uso, el abuso, el daño accidental o la negligencia.
Esta garantía limitada le da a usted derechos legales específicos, usted también puede tener otros derechos que varían de un estado (provincia) a otro.
EL RECIBO DE LA COMPRA (U otra prueba de compra) seríarequerida antes que cualquier servicio de garantía fuera iniciada.Para todo pedido por servicio de garantía, por favor siéntase libre deponerse en contacto con nuestro Departamento de Servicio deConsumidor en:
WEBSITE: www.themdsports.com
Por favor tenga atención sobre el Límite de Garantía de su producto de la política de vuelta/reembolsa desde la tienda, Nosotros, Medal Sports, no podemos manejar el producto que está fuera del límite de garantía ya que proporcionamos solamente partes disponibles. Gracias!
POR FAVOR PÓNGASE EN CONTACTO CON NOSOTROS ANTES DE DEVOLVER EL PRODUCTO A LA TIENDA.
!
(Continúe en la siguiente página.) www.themdsports.com1625611 2(Continued on the next page.)
EspañolEnglish
CAUTION !
ASSEMBLY TIPS
TOOLS REQUIREDPhillips Screwdriver - Not IncludedStandard (Flat Head Screwdriver) - Not IncludedAllen Key - Included
Electric Screwdrivers may be helpful during assembly; however, please set a low torque and use extreme caution.
1 - This product is intended for INDOOR use only.
2 - Please do not sit, climb or lean on the product.
3 - Please do not drag the product when moving it in order to avoid damaging the legs.
4 - Please only use spray furniture polish to clean the exterior surfaces of the product.
5 - This is not a child's toy, adult supervision is required for children playing this game.
IMPORTANT NOTICE!
Power Tools - Set Low Torque
High Torqueover tightened
1 - Please read the instructions carefully, and follow all assembly, operation and safety instructions properly in order to avoid damage or injury. For the assembly, at least two adults are required.
2 - Some figures or drawings may not look exactly like your product. Please read and understand the text before beginning each assembly step.
Destornillador Phillips - No IncluidoDestornillador de Cabeza Plana - No IncluidoLlave Allen - Incluido
Los destornilladores eléctricos pueden serde gran ayuda durante el ensamblado; sinembargo, por favor ajuste el par de girobajo y sea extremadamente precavido.
Herramientas Necesarias
CONSEJOS PARA EL ENSAMBLADO
1 - Este producto está destinado para el uso INTERIOR solamente.
2 - Por favor no sientes, subas o inclínes la producto.
3 - Por favor no arrastres el producto cuando está moviendo para evitar el daño sobre las piernas.
4 - Por favor use solamente pulimento de rociar para muebles para limpiar la superficie exterior del producto.
5 - Esto no es un juguete de niños, se requieren la supervisión adulta para niños cuando está jugando este juego.
¡AVISO IMPORTANTE!
1 - Por favor lea las instrucciones con cuidado y siga todo durante el montaje, la operación o instrucciones de seguridad correctamente para evitar el daño o la herida. Para el montaje, por lo menos se requieren dos adultos.
2 - Algunas figuras o dibujos podrían parecer no estén exactamente como su producto. Por favor lea y entienda el texto antes de iniciar cada paso del montaje.
WARNING:This item contains small parts or / and small balls.Not suitable for children under 3 years.
WARNING: Adult Assembly Required.
PELIGRO DE ASFIXIO - - Este artículo contiene piezas pequeñas y / o pequeñas bolas. No apto para menores de 3 años.
ADVERTENCIA: Las tareas de montaje debe realizarlas un adulto.
ADVERTENCIA:
Strong Adults Needed No Children inAssembly Area
Keep away from pets Do not use or keep product outdoors. For indoor use only.
No wet/humid conditions.
X 2
¡PRECAUCI N!
Adultos fuertes necesarios
No tener niños en el area de ensamble
Mantener alejados a los animales domesticos del area de ensamble
No usar o guardar el producto en el exterior. Solo para uso en interior.
No utilizar ni guardar el producto en lugares humedos o mojados
www.themdsports.com1625611 3 (Continúe en la siguiente página.)(Continued on the next page.)
EspañolEnglish
9 10 11 12
13 14 15 16
2 3 41
x1 x4 x2 x1
6 7 85
x4
x13 x13 x13
x13 x13 x13 x26
x2 x4
18 19 20
x16
x16
x2
x2
21
x4
22
x8
23
x8
24
25
x4
26
x12
27
x8
28
x8
17
x2
1625611 PARTS LIST / LISTA DE PARTES
x8
x1
Mainframe Unidad Principal
Player Head - Gray
Player Head - Bronze
Player Front - Gray
Leg Leveler Nivelador de Pierna
Leg Pierna End Leg PanelPanel de
Pierna Final Side Leg Panel Panel de Pierna Lateral
Player Front - Bronze
Player Back - Gray
Player Back - Bronze
JugadorCabeza - Gris
JugadorCabeza - Bronce
JugadorDelantero - Gris
JugadorDelantero - Bronce
JugadorTrasero - Gris
Player Back - Bronce Player Rivet Remache del
Jugador
5-Hole RodBarra de 5 Agujeros 2-Hole Rod
Barra de 2 Agujeros
Rod WasherArandela de Barra
Scorer HolderSujetador
de MarcadorRod End CapGorra de
Barra Final Handle Mango
Tornillo M4 x 25mm
Cerrojo M8 x 35mm
Cerrojo T5 x 15mm
Cerrojo M8 x 136mm Arandela M8
Allen Key Llave Allen M4 x 25mm Screw
M8 x 136mm Bolt
M8 WasherM8 x 35mm BoltT5 x 15mm Bolt
29
x8
Rod Bumper Bómper de Barra
Slide Scorer Resbaladilla de Marcador
Soccer ball Bola de Fútbol
3-Hole RodBarra de 3 Agujeros
M8 Spring Lock Washer
Arandela de Cerradura
de Resorte M8
www.themdsports.com1625611 4 (Continúe en la siguiente página.)(Continued on the next page.)
EspañolEnglish
ASSEMBLY INSTRUCTIONS:1. Find a clean, level place to begin the assembly of your Soccer Table. The table will be assembled upside downand then turned over on its legs once the assembly completed. This game table is heavy, and turning it over will require at least two strong adults.
2. Remove all the parts from the box and verify that youhave all of the listed parts as shown on the parts listpage. Carefully cut or tear the four corners of the boxso that the bottom of the box can be used as yourwork surface.
1. Encuentre un lugar limpio, plano para comenzar el ensamblaje de su Mesa de Billar. La mesa será montada al revés y luego voltee sobre sus piernas una vez completada el ensamblaje. Esta mesa de juego es pesada y requerirá por lo menos cuatro adultos fuertes para el volteo.
2. Quite todas las partes desde la caja y verifique queestán todas las partes catalogadas como mostradoen la página de lista de partes. Con cuidado de cortaro rasgar los cuatro rincones de la caja de modo queel fondo de la caja podría ser usado como susuperficie de trabajo.
INSTRUCCIONES DE ENSAMBLAJE:
1625611 PRE-INSTALLED PARTS / PIEZAS PREINSTALADAS
P1 P2
x16 x16
P3
x2
P4
P5 P6
x4 x6
Outside Rod Bushing
Inside Rod Bushing
Dentro Cojinete de Barra
Fuera Cojinete de Barra
“L” Bracket Corchete “L”
P7
Goal Cover Cubierta de Gol
x6
Square NutTuerca
Cuadrada
Playfield Ramp Elevador delCampo de Juego
x2Square Nut with Screws
Tuerca Cuadrada con Cerrojos
P9
x1Logo Plate Placa de logotipo
P8
x8
5/16” Nut Tuerca5/16”
1
2
27
28
www.themdsports.com1625611 5 (Continúe en la siguiente página.)(Continued on the next page.)
EspañolEnglish
FIG.13. Attach the Legs (#2) to the Mainframe (#1) using two Bolts (#27), two Spring Lock Washers (#29) and two Washers (#28) per Leg. See FIG. 1.
FIG.13. Adjunte la Pierna (#2) al Unidad Principal (#1) usando 2 Cerrojos (#27), 2 Arandelas de Cerradura de Resorte (#29) y 2 Arandelas (#28) por pierna. Vea la FIG. 1.
FIG.24. Attach the End Leg Panels (#3) to the Side Leg Panel (#4) using two Bolts (#26) per Leg End Panel. See FIG. 2.
FIG.24. Adjunte la Panels de Pierna Final (#3) al Panel de Pierna Lateral (#4) usando 2 Cerrojos (#26) por Panel de Pierna Final. Vea la FIG. 2.
X 1
X 4
X 8
X 8
FIG. 1
P4 X 4
P8 X 8
3
34
4
26
26
X 2
X 1
X 4
FIG. 2
3
29 X 8
P4 X 2
P8
1
27
28
2
P4
P4
29
www.themdsports.com1625611 6 (Continúe en la siguiente página.)(Continued on the next page.)
EspañolEnglish
21
26
X 4
X 8
FIG. 3
P5 X 4 P526
2621
3
3
2
FIG.35. Attach the Legs (#2) to the End Leg Panels (#3) using two Bolts (#26) per Leg. See FIG. 3.
6. Screw the Leg Levelers (#21) into the bottom of each leg.
7. Lift the table assembly from the floor with at least two strong adults, turn it over, and set the table assembly on its legs in the location where you play.
FIG.35. Adjunte la Pierna (#2) al Panels de Pierna Final (#3) usando 2 Cerrojos (#26) por pierna. Vea la FIG. 3.
6. Atornille los Niveladores de Pierna (#21) al fondo de cada pierna.
7. Levante la mesa montada del piso por lo menos con dos adultos fuertes, voltee la mesa y ponga la mesa montada sobre sus piernas en la posición donde usted juega.
NO APOYES LA MESASOBRE SUS PIERNAS
AGARRE LAMESA
NO AGARRES LAS PIERNAS DO NOT LEAN THETABLE ON ITS LEGS
HOLD TABLE
AGARRE LAMESA
HOLD TABLE DO NOT HOLD THE LEGS
CAUTION: Two strong adults are recommended to turn the table over as shown. 1. Lift the table off the ground. 2. Turn the table over.3. Place it on all four feet at the same time on the ground.
PRECAUCION: Recomienda voltea la mesa por dos adultos fuertes como mostrado.1. Levante la mesa desde el piso.2. Voltee la mesa.3. Coloque los cuatro pies de la mesa sobre el piso al mismo tiempo.
P9
www.themdsports.com1625611 7 (Continúe en la siguiente página.)(Continued on the next page.)
EspañolEnglish
FIG.48. Slide the Rods (#5-7) through the Rod Bushings (#P1) on one Side Apron in the order as shown in FIG. 4. Note: The Rods have a hole at the end where their Handles will go.
9. Place the Rod Washers (#9), Rod Bumpers (#8) onto the Player Rods (#5, #6 and #7) in the order as shown in FIG. 4, 4A and 4B.
10. Now insert the Player Rods (#15, #16 and #17) through the Rod Bushings (#P2) on the opposite Side Apron.
FIG.48. Deslice las Barras (#5-7) por Los Cojinetes de Barra (#P1) sobre un Delantal Lateral según el orden como mostrado en la FIG. 4. Nota: Las Varas vienen con un hoyo en la punta donde van las Manillas.
9. Coloque los Arandelas de Barra (#9), Bómpers de Barra (#8) sobre las Barras de Jugador (#5, #6 & #7) según el orden como mostrado en la FIG. 4, 4A y 4B.
10. Ahora inserte las Barras de Jugador (#15, #16 and #17) a los Cojinetes de Barra (#P2) sobre el Delantal Lateral opuesto.
7 7
6 6 66
5 5
8
8
9
9
5
6
X 2
X 4
FIG. 4
FIG. 4A 7 X 2
8 X 16
9
P1
P2P3 P7
8 8 9 9
X 16
P1 X 16
P2 X 16
P3 X 2
P7 X 2
P9 X 1
NOTE: Hole at the end of Rod designateshandle location. See Arrow Location Below.
/ Nota: Agujero en el final de Barra se designa la posición de manija. Vea la Siguiente Posición de Flecha.
FIG. 4B
Note: Players of the same team color should have Handles on the same side, and each team’s players should be facing their opponent.
Nota: Los jugadores del mismo color de equipo debería tener Manijas sobre el mismo lado, y los jugadores de cada equipo debería afrontar a su opositor.
www.themdsports.com1625611 8 (Continúe en la siguiente página.)(Continued on the next page.)
EspañolEnglish
FIG.511. Attach the Players Head (#10 & #11), Players Front (#12 & #13), Players Back (#14 & #15) to the Rods using one Players Rivet (#16).See FIG. 5A. Note: The goalie should be at the left side of each player.
FIG.511. Adjunte las Cabezas de Jugadores (#10 & #11), Jugadores Delanteros (#12 & #13), Jugadores Traseros (#14 & #15) a las Barras usando 1 Remache de Jugador (#16). Vea la FIG. 5A. Nota: El portero debería estar en la parte izquierda de cada jugador.
10
11
FIG. 5
FIG. 5 A
12
13 X 13
14 X 13
15 X 13
X 13
X 13
X 13
16 X 26
A B C
1113
1514
16
ORDER OF PLAYERS(Overhead View)
Orden de Jugadores(Vista en General)
= Bronze / Bronce
= Gray / Gris
NOTE: Make sure 1 Rod Bumper and 1Rod Washerare at each end of the Player Rods before adding Players.
/ Nota: Haga seguro que 1 Bómper de Barra y 1 Arandela de Barra están en cada final de las Barras de Jugador antes de agregar Jugadores.
or/o
12 or/o10 or/o
www.themdsports.com1625611 9 (La ultima página)(The last page)
EspañolEnglish
FIG.612. Attach the Handles (#18) to the Rods using one Bolt (#25) per Handle. See FIG. 6A. Then place the Rod End Caps (#17) onto the other side of the Rods. See FIG. 6B.
13. Attach the Scorer Holders (#20) to the End Apronsusing one Screw (#24) per Scorer Holder. See FIG. 6C.Then Place the Slide Scorers (#19) on theScorer Holders.
FIG.612. Adjunte los Mangos (#18) a las Barras usando 1 Cerrojo (#25) por Mango. Vea la FIG. 6A. Luego coloque Las Gorras de Barra Final (#17) sobre el otro lado de las Barras. Vea la FIG. 6B.
13. Adjunte los Sujetadores de Marcador (#20) a losDelantales Final usando 1 Tornillo (#24) porSujetador de Marcador. Vea la FIG. 6C.Luego coloque los Resbaladilla de Marcadores (#19)sobre los Sujetadores de Marcador.
17 17
18
18
FIG. 6
FIG. 6A
19
19
20
20
X 4
24
24
X 4
25
25
X 8
X 8
X 8
X 2
The Hole / EI Agujero
YOU ARE NOW READY TO PLAY! ¡VOUS ETES MAINTENANT PRET A JOUER!
FIG. 6B
FIG. 6C