Upload
others
View
7
Download
1
Embed Size (px)
Citation preview
1
2
3
4
5
6
7
2
2
4
4
1
1
2
1
Assembly Instructions for Mobile WorkstationThanks for choosing our product. This stand ideally works as mobile podium, lectern and laptop workstation. The height of stand can be easily adjusted. The integrated wheels provide ease of movement.
Safety Warning: If you do not understand these directions, or have any doubts about the safety of the installation, please call a quali�ed contractor. Check carefully to make sure there are no missing or defective parts. Never use defective parts. Improper installation may cause damage or serious injury. Do not use this product for any purpose that is not explicitly speci�ed in this manual. We can not be liable for damage or injury caused by incorrect mounting, incorrect assembly, or incorrect use.
Required Tools: Phillips screw driver.
Supplied Parts
Long Square Tube
Short Square Tube
Pole Set
Tube Connector
Tube Connector Cover
No. Picture Description Quantity
Front
Back
Wheel & Washer
M6 Socket Plate
hole for connecting the Pole Set(7)
MWS-001BK
1
4
2
1
Connecting Tube
Plastic Sleeve
Soft Pad
Top Plate
No. Picture Description Quantity
2
10
12
8
9
11
13
14
15
16
18
17
Plastic Knob
Left Connecting Plate
2
1
4M6 Nut
Right Connecting Plate
Shelf
1
1
Lever 2
Shelf Support 2
No. Picture Description Quantity
3
19
20
8
12M6x10 Allen Head Bolt
M6x60 Allen Head Bolt
M5x6 Grub Screw
M4X6 Countersink Bolt
2
421
22
23 2M6 Washer
Tool Kit24 1
2
4
3 4
5-1 5-2
5-3
Turn this nut to adjust the height of wheel.Important: Short square tube(2) should be on the same side as the screw hole for Pole Set (7).
Adding plastic sleeves to prevent pulling out the innerpoles from outer poles.
These holes are used for connecting the shelf(12), facing them to the Long Square Tube(1).
1 Use Tool kit(24)
Use Tool kit(24)
Use Tool kit(24)
Use Tool kit(24)
3
1
Use Tool kit(24)
3
7
5
8
920
26
19
4
20
22
Front
Back
hole for connecting the Pole Set(7)
3.13.2 3.3
Left
Right
5
7
8 9
10
Use Tool kit(24)
6
10
1221
11
20
Use Tool kit(24)
Use Tool kit(24)
13
20
16
15
14
6
11
12 14
13
Adding the SoftPad(18) optionally.
17 23
tilt 40°
18