Upload
others
View
2
Download
0
Embed Size (px)
Citation preview
ASSEMBLY INSTRUCTIONSCOASTER FINE FURNITURE
Fine Furniture for every stage of life
REVISION 0 : 03/15/2018
PAGE 1 OF 9 COASTERFURNITURE.COM
CURIO CABINET950170
REVISION 1 : 09/12/2019
ASSEMBLY INSTRUCTIONSASSEMBLY TIPS:1. Remove hardware from box and sort by size.2. Please check to see that all hardware and parts are present prior to start of assembly.3. Please follow attached instructions in the same sequence as numbered to assure fast & easy assembly.
1. Don’t attempt to repair or modify parts that are broken or defective. Please contact the store immediately.2. This product is for home use only and not intended for commercial establishments.
COASTERFURNITURE.COM
ASSEMBLY TIME 50 MINUTES
PARTS IDENTIFICATION
2PCSA DOOR GLASS1555x279mm
950170ITEM:
WARNING!
PAGE 2 OF 9
2PCSB SIDE GLASS1576x345mm
1PCC BACK GLASS1576x567mm
2PCSD PLASTIC BAR
4PCSE SHELF SUPPORT
1PCF TOP WOOD PANEL
1PCG BOTTOM WOOD PANEL
COASTERFURNITURE.COMPAGE 3 OF 9
PARTS IDENTIFICATION
4PCSH GLASS SHELF565x250mm
ASSEMBLY INSTRUCTIONS950170ITEM:
HARDWARE IDENTIFICATION
4PCS1PLASTIC FEET(∅44 x 18mm)
8PCS
2PCS
7
2PCS
8PCS
ALLEN BOLT-LARGE(1/4" x 1-3/4")
WASHER(1/4" x 16mm)
HANDLE(40mm)
METAL CONTACT(40mm)
2
8
3 4PCSADHESIVE
(38 x 42mm)
9
4PCS 4PCS
4PCS
HINGE(40mm)
HINGE INSERT(∅12 x 9mm)
SCREW(∅8 x 22mm)
4
10
5 1PCALLEN KEY
(4mm)
11
4PCSMETAL WITH ADHESIVE
(38mm)6 16PCS
SUCTION CUP(∅20 x 28mm)
12
13
14
15
16
8PCSSMALL BOLT(∅7 x 6mm) 16PCS
BOLT(∅8 x 30mm)
4PCSPLASTIC MAGNET
(19mm) 4PCSSTICKER(∅20mm)
COASTERFURNITURE.COMPAGE 4 OF 9
ASSEMBLY INSTRUCTIONS950170ITEM:
STEP 1
STEP 2
121
23
G
1
22
3
121
E
DC
E
E
EEG
12 1
23
2
2
3
3
1121
12
COASTERFURNITURE.COMPAGE 5 OF 9
ASSEMBLY INSTRUCTIONS950170ITEM:
STEP 3
STEP 4
1
2
3
F
2
BB
14 15
1415
323
2
23
1415
1415
1415
1415
1415
1415
1415
1415
1415
1415
1415
1415
1415
1415
1415
COASTERFURNITURE.COMPAGE 6 OF 9
ASSEMBLY INSTRUCTIONS950170ITEM:
STEP 5
STEP 6
H
H
H
H
5
4
45
8
8
54
54 8
4 5
85
4
COASTERFURNITURE.COMPAGE 7 OF 9
ASSEMBLY INSTRUCTIONS950170ITEM:
COMPLETESTEP 8
STEP 7
9
11
67
9
11
1110
9
77
7
7
1110
11
16
16
COASTERFURNITURE.COMPAGE 8 OF 9
ASSEMBLY INSTRUCTIONS950170ITEM:
Product Size : 603 X 367 X 1632 H (MM)
Product Size : 23 34" X 14 1
2" X 64 14"
21 58"
550 mm11 38"
288 mm
wood
23 34" X 14 12" X 1"
603X367X25mm
61 12"
1563 mm
11 34"
299 mm
12 18"
308 mm
12 14"
312 mm
12 18"
308 mm
12 12"
319 mm
10 12"
267 mm
64 14"
1632 mm
23 34"
603 mm
14 12"
367 mm
wood
23 34" X 14 12" X 1"
603X367X25mm
glass
22 14" X 9 78" X 1
4"
564X250X5mm
glass
22 14" X 9 78" X 1
4"
564X250X5mm
glass
22 14" X 9 78" X 1
4"
564X250X5mm
glass
22 14" X 9 78" X 1
4"
564X250X5mm
Note : Dimension tolerance ±5%
This tip restraint must be attached to a wall STEP 2stud using long screw enclosed.
STEP 1
STEP 3
Attach a bracket securely to the back top rail of
the furniture using short screw provided, through
the smaller hole.
Locate the other bracket on the wall over a wall
stud and two inches below the mounting bracket
secured to the back of the furniture. Attach the wall
stud using the long screw provided, through the
smaller hole.
PAGE 4 OF 4 COASTERFURNITURE.COM
Place the furniture into position so both mounting brackets are vertically in line. Lace the end of the
restraint strap through the larger hole in each mounting bracket. Bring both ends together and slide the
flat end through the locking end and draw it through until all slack is removed. Confirm that the strap is
securely laced and locked.
ITEM: 205443 ANTI-TIPPING INSTALLMENT INSTRUCTIONS
Failure to detach this restraint before moving the furniture may result in injury and damage.
FURNITURE TIPPING RESTRAINT
WARNINGInjury may result from tipping furniture.
This restraint may protect against tipping furniture.
Do not allow children to climb on furniture.
This restraint is not a substitute for proper adult supervision.
a plastic wall