Embed Size (px)
Citation preview
MATERIALS• Girders, supports, cross members: aluminum• Screws: stainless steel • Ramming piles: galvanized steel
MODULE TYPES
Framed crystalline modules • 800 x 1000 mm• 1000 x 1600 mm• 1000 x 2000 mm
Frameless modules with back rails possible
LOGISTICS • Increased effi ciency as only three components• Low weight through aluminum constructi on
ASSEMBLY• Prefabricated components • Terrain-fi tti ng constructi on possible• No nut-and-bolt connecti on in the mounti ng system
STATICS• Site-specifi c system stati cs• Loading in acc. with DIN 1055 and Eurocode• Numerical verifi cati on of components through an FEM simulati on
FIRE PROTECTIONGROUNDINGEQUIPOTENTIAL
• Potenti al equalizati on connected to module pedestals• Upgrade through other lightning protecti on systems (opti onal)• Grounding through rammed foundati on
LANDSCAPE MAINTENANCE
• Easy landscape maintenance due to ground clearance from lower edge of module: min. 60 cm
GUARANTEE Ten-year manufacturer guarantee*
SERVICE PORTFOLIOVISPIRON ENERGYGMBH & CO. KG
Planning:• Draft ing of an assembly plan (opti onal)• Draft ing of site-specifi c stati cs (opti onal)
Executi on:• Delivery of mounti ng system• Delivery of ramming foundati on• Assembly of mounti ng system and modules (opti onal)
Maintenance of rack systems
TECHNICAL SPECIFICATIONS OF PARSASSEMBLY IN SIX STEPS
• Determinati on of number of modules per pedestal
• Module confi gurati on taking account of general electrical and mechanical conditi ons
• Surveying and marking the foundati on positi ons
• Ramming the foundati ons into the soil
Mounti ng the cross members on the foundati ons
• Mounti ng and fastening the modules
• Wiring the strings • Module clips or screws
possible
1 2 3
4 5 6
CHARACTERISTICS AND COSTS
ADVANTAGES
• Endless assembly system• Quick assembly as only 3 system components• Corrosion-resistant due to use of aluminum and galvanized steel• Highly economical• Stati cally tested
CONFIGURATION PREPARATION RAMMING THE FOUNDATIONS
MOUNTING CROSS MEMBERS MOUNTING GIRDERS MOUNTING THE MODULES
• Draft ing the layout plan• Test pile driving and soil
experti se• Site-specifi c stati cs
calculati on
• Self-tapping screws• Predefi ned taps
PARSEffi cient open space photovoltaic mounti ng system
PARS mounti ng system
*in acc. with the VISPIRON ENERGY GmbH & Co. KG
VISPIRON ENERGY GmbH & Co. KG • Frankfurter Ring 224 • D-80807 München • +49 (0)89 / 55 29 70 27 • +49 (0)89 / 55 29 70 79 vispiron.de • [email protected]
5
VE_0
4_20
11_2
00
4
PARS MOUNTING SYSTEM OVERVIEW
3
Cable can run through girders
Self-tapping screws
without nuts
Girder
Cross girder
Tolerance equalizati on
cross member to foundati on
C 125 ramming
2
CROSS MEMBER TO FOUNDATION
Att aching cross mem
-ber to foundati on
MOUNTINGMODULES
Mounti ng m
odules w
ith clamping units
Mounti ng m
odules w
ith screws
Att aching mounti ng
plate to ramm
ed foundati on
MOUNTING PLATE
GIRDER TO CROSS MEMBER
Att aching girder to cross m
ember
Hole – long hole connecti on
