1005155 | tuuci | 5

1B

1C

1D

1A

1D

1A

DO NOT TIGHTEN HARDWARE. TIGHTEN AT THE END OF INSTALLATION

Slide in beauty cover into columns before intalling beams.

2LAY FLAT ON THE FLOOR. MATCH/CONNECT ALL LABELS.UNSCREW PRE-ASSEMBLED NUTS TO CONNECT COLUMNS WITH BEAMS. To prevent damage to the structure lay a soft cloth or cardboard on the floor when assembling.

1C

1B

flat socketscrew x2

beauty cover

Secure columns to base using the flat socket screw. Screws must remain loose do not tighten.

colu

mn

beam

colu

mn

colu

mn

colu

mn

beam

beam

beam

If applicable position slats in the correct direction for seating

SEE PAGE 6 TO 8 FOR STEP BY STEP

ASSEMBLE COLUMNS & BEAMS

1005155 | tuuci | 6 DO NOT TIGHTEN HARDWARE. TIGHTEN AT THE END OF INSTALLATION

2 IF APPLICABLE CONNECT ALL ELECTRICAL

PULL OUT WIRES COMING OUT OF THE COLUMNS AND BEAMS. CONNECT ALL ELECTRICAL PLUGS WITH MATCHING LABELS.

TEST ELECTRICAL IN TO OUTLET BEFORE ADDING ROOF.

1005155 | tuuci | 7

step 1

column D

beam D

column

column

beam

beam

column

beam

1A

1C

step 2

1B

step 3 step 4

1D

IF CABANA COMES WITH ELECTRICAL FEATURES PULL OUT THE WIRES COMING OUT OF THE COLUMNS AND BEAMS.

1A

1C

Pre-assembled nuts

Pre-assembled nuts

Pre-assembled nutsPre-assembled nuts

DO NOT TIGHTEN HARDWARE. TIGHTEN AT THE END OF INSTALLATION

2 MATCH/CONNECT ALL LABELS.

1005155 | tuuci | 8

beauty cover x4

stem base x4

step 5Lift connected columns/beams upright and fasten to stem bases. Add beauty covers before mounting.

step 6Secure columns to base using the flat socket screw. Screws must remain loose do not tighten.

flat socket screw x2

step 7

1A

1B

1C

1D

beauty cover

beam

beam

1A

1B

1C

1D

DO NOT TIGHTEN HARDWARE. TIGHTEN AT THE END OF INSTALLATION

2 MATCH/CONNECT ALL LABELS.

1005155 | tuuci | 9

beam

column

column

cabana 1

cabana 2

1B

1C

2B

2C

2 IF APPLICABLE CONNECTED CABANAS

cabana 33B

3C

cabana 1

cabana 2

DO NOT TIGHTEN HARDWARE. TIGHTEN AT THE END OF INSTALLATION