info@ashdale.co.uk www.ashdale.co.uk 00 44 28 9078 3000 Ashdale Product Information Library

Containerised Power Solutions meet Riello’s stringent requirements for eco-friendly power protection systems. Their high operating efficiency saves energy and reduces operating costs (Opex). The energy savings achievable are configuration dependent and can typically lead to Capex recovery within 5 years.

ECO Friendly UPS

Compact and Efficient

A flywheel enabled Riello UPS is the nearest you can get to a ‘fit-and-forget’ power protection system. The flywheel module runs on ‘frictionless’ bearings within a vacuum at 3600rpm. Unlike competitor systems, there is no need for a bearing change or the risk of damage that can result from a loss of vacuum within the flywheel cabinet. An annual inspection with minimal preventative maintenance is all that is needed to ensure your system is in the best of health.

Simplified Maintenance

The flywheel concept is an established ‘green’ battery replacement technology and one being used by leading data centre architects. Compact footprints, fast Capex recovery and high operating efficiencies help to provide an impressively low TCO. Cost savings in future battery inspection, monitoring and replacement can be up to 60% with further reductions in operating costs.

Low Total Cost of Ownership

High reliability is the hallmark of a transformer-based UPS like the Master HP series. The electronics are time-tried and used within thousands of critical installations, covering city centre sites to the harshest remote conditions. Scalable (N+1) modular architecture further improves system resilience - up to 8 UPS modules – for a truly fault-tolerant system.

Reliable and Resilient Modules

Riello UPS are some of the most compact available. Using a flywheel in place of a traditionally sized (10 minute) runtime battery pack can achieve an overall system footprint reduction of 50-75%. The flywheel provides sufficient time for generator start-up but can also be used in series with a battery pack to protect the battery from the effects of ‘hardening’ - helping to extend the useful working life of a battery set.

Reliable power for a sustainable world

The complete range of power solutions from desktops to datacenters

Uninterruptible Power Supplies from 400VA to 6MVA

Centralised Battery Supplies and Standby Power Systems

Static Switches

Generators

Inverters

Flywheels

TeleNetGuard 24/7 remote site monitoring

International service

RPS spa - Viale Europa, 7 - 37045 Legnago (Verona) - Italywww.riello-ups.com - info@riello-ups.com

Riello UPS Ltd - Sales: 0800 269 394 - Service - 0800 298 5355www.riello-ups.co.uk - sales@riello-ups.co.uk

Introducing PowerBox

PowerBox provides uninterruptible power, wherever and whenever you need it. Each PowerBox is project configurable to provide critical systems with a site specific power solution. PowerBox is a self-contained power solution that can be delivered, installed and working within hours.

Each PowerBox contains all the necessary switchgear and distribution panels to deliver uninterruptible power from a combination power solution which can include: a Riello UPS, flywheel energy storage system, battery packs, and suitably rated generator.

Riello UPS Master series

standalone/N+1

Vycon Flywheel system and/or battery pack

Elcos Standby PowerGenerator with

built-in fuel tank

Riello Containerised Power Solution - the PowerBox

Containerised ArchitectureToday’s data centre market requires flexible power solutions. The PowerBox extends Riello’s power solutions range to provide containerised solutions that can be easily deployed and installed wherever and whenver needed, with minimal impact on existing plant room and faciltiies.

PowerBox provides a robust, highly resilient and efficient power solution with zero downtime, in a simple to install, low maintenance, self-contained configuration.

Each PowerBox can be configured from a range of standard Riello UPS systems to deliver a site specific solution:• UPS: 200kVA and 500kVA

modules with a full power rating of 4MVA/3.6MW

• Flywheels: 215kW and 300kW with parallel installation to extend the energy storage

• Battery Extension Packs installed for increased system resilience.

• Generators: running LPG (or diesel) to provide efficient extended runtimes up to 24 hours.

Options• Input isolation transformer• Closed-loop parallel

connection kits• Parallel group UPS

Synchronisation (USG)• Hot-system connection

(PSJ) • Generator interfaces (UPS

and flywheel)• External bypasses (UPS and

flywheel)• Battery extension packs

(cabinets or racks)• Remote status panels and

EPO facilities• Event logging and site

history alarm logs • Communications (MODBUS,

SNMP, Volt-free Contacts) • 24/7 Remote Monitoring

with 2, 4 or 8 hour response (location dependent)

Containerised Power Solution

The Riello PowerBox can be installed with components within a ‘stand-alone’ 20-foot or 40-foot container. Simple to deliver, connect and power-up, the Riello PowerBox is a highly-efficient and resilient power solution for:

• Modular data centres requiring a scalable power system

• City data centre sites requiring additional power

• Public events requiring short-term power

• Military and remote installations

Space Optimising

A Riello Containerised Power Solution allows you to optimise space within your facility. No longer do you need dedicated space within your data centre facility or plant room. Simply sit the containerised solution where you need it and hook-up to pre-configured tails. This allows more of the building (especially on brown-field sites where space may be limited) to be used for critical IT infrastructure.

Full-Turnkey and Project Management

The Riello UPS team runs installations 365 days a year. Dedicated project managers will help you design, deliver and install the right configuration for your application. Full site surveys are provided in addition to CAD compatible drawings and documentation.

Pre-Delivery Configuration and Testing

The Riello Containerised Power Solution is designed for ‘quick and easy’ installation. Each system is pre-configured and tested to allow rapid deployment; responding to customer needs for emergency power or as part of an ongoing project. The Riello Containerised Power Solution has been specifically designed for:

• Ease of logistics: flatbed, Hiab delivery using a four-point lift.

• Mobility: forklift truck slots incorporated into the base of the unit.

• Ease of installation: central connection switchgear for resilient power.

• ‘Forced-air-cooling’ to remove the need for expensive air conditioning.

• Secure doors for ease of inspection and maintenance.

Without an associated battery-build on-site the system can be up and running within one hour to a pre-configured site. Riello Containerised Power Solutions can be hired to provide a ‘just-in-time’ response to demands for critical power; allowing organisations to focus their resources on their business, rather than investing in lengthy building projects.

Service and Maintenance

Riello UPS operate nationwide service facilities and spares depots. Whether you install a Containerised Power Solution or a single Modular Power Source UPS, full pre-sales support and after-sales service is provided by factory trained engineers. Each system can be remote monitored by a central service data centre, providing remote alarm monitoring and reporting, emergency response and schedule inspections.

Purchase or Hire

Our smaller Containerised Power Solutions are available for short-term hire to allow clients to perform their own-onsite tests prior to purchase or provide clean, resilient power for a specific event or project. This facility is subject to availability.

Seminars

Riello UPS offer CPD-certified training seminars on the PowerBox solution. For more information please contact our sales and projects team.

MODELS U.M. PowerBox 60.200.300 PowerBox 121.500.600

Features - UPS + Flywheel + Generator UPS + Flywheel + Generator

UPS Power kVA 1 x 200 1 x 500

Flywheel kW 1 x 300 1 x 600

Diesel* kVA 275 700

Input supply A 400 1000

UPS supply A 317 794

Batteries^ - Optional self-contained battery cabinet(s) Optional self-contained battery cabinet(s)

UPS output A 289 724

Dimensions cm [LxWxH] 605 x 243 x 253 [LxWxH] 1210 x 243 x 253

Container feet 20’ 40’

Weight kg 8000 15000

PowerBox Connections PowerBox Datasheet PowerBox Details

Master HP UPS

Flywheel and/or battery pack

Standby Generator &built-in fuel tank

UPS Flywheel

LOAD

CRITICAL LOAD

PowerBox

Generator

Master HP UPS is one of the most efficient and site compatible uninterruptible power systems available. An advanced IGBT-based rectifier ensures a ‘Zero Impact Source’ system with the following characteristics:

• Low input THDi (<2.5%)• High input Power Factor (0.99)• Power ‘walk-in’ with

progressive rectifier start-up• Delayed start-up when

mains power returns (parallel systems)

• High output Power Factor (0.9)• Compact size: 0.85m scalable

parallel operation up to 8 modules (N+1)

• Double load protection (electronic and galvanic)

• Flywheel energy storage

On mains power failure, a traditional UPS configuration uses a battery set to provide a DC energy source. Within the Clean Energy UPS, a flywheel provides this runtime, with the following advantages over a similar-sized battery set:

• Compact foot print and high energy density

• High reliability and efficiency (99%)

• ‘Instantaneous’ recharge (minutes compared to hours)

• Minimal maintenance and a long working life (> 20 years)

• Simple ‘self-contained’ installation

• Low Total Cost of Ownership• Optional parallel battery kits

The Modular Power Source UPS is available in 200kVA and 500kVA module sizes which can be paralleled to provide up to 4MW of clean power. The Modular Power Source UPS is a stand alone power protection and energy storage system.

The runtime available can be extended using parallel flywheels or installation of an additional battery extension pack. This is an option available within the Riello Modular Power Architecture. Within such an installation the flywheel would provide the first source of stored energy, protecting the batteries and prevent unnecessary discharges (typically 98%). The flywheel also provides the additional advantage of an almost ‘instantaneous’ recharge compared to the hours (or days) it can take for a battery to recharge to 100% capacity.

PowerBox is available in several combinations. Two general configurations are shown in the table below using 20’ and 40’ containers, housing Riello UPS, a flywheel and generator set.Generator Panel &

Auto Transfer Switch

Note: * 8 hour fuel tank, 20 hour optional, ^ from 5-10 minutes or more to provide additional resilience

Containerised ArchitectureToday’s data centre market requires flexible power solutions. The PowerBox extends Riello’s power solutions range to provide containerised solutions that can be easily deployed and installed wherever and whenever needed, with minimal impact on existing plant room and facilities.

PowerBox provides a robust, highly resilient and efficient power solution with zero downtime, in a simple to install, low maintenance, self-contained configuration.

Each PowerBox can be configured from a range of standard Riello UPS systems to deliver a site specific solution:• UPS: 200kVA and 500kVA

modules with a full power rating of 4MVA/3.6MW

• Flywheels: 215kW and 300kW with parallel installation to extend the energy storage

• Battery Extension Packs installed for increased system resilience.

• Generators: running LPG (or diesel) to provide efficient extended runtimes up to 24 hours.

Options• Input isolation transformer• Closed-loop parallel

connection kits• Parallel group UPS

Synchronisation (USG)• Hot-system connection

(PSJ) • Generator interfaces (UPS

and flywheel)• External bypasses (UPS and

flywheel)• Battery extension packs

(cabinets or racks)• Remote status panels and

EPO facilities• Event logging and site

history alarm logs • Communications (MODBUS,

SNMP, Volt-free Contacts) • 24/7 Remote Monitoring

with 2, 4 or 8 hour response (location dependent)

Containerised Power Solution

The Riello PowerBox can be installed with components within a ‘stand-alone’ 20-foot or 40-foot container. Simple to deliver, connect and power-up, the Riello PowerBox is a highly-efficient and resilient power solution for:

• Modular data centres requiring a scalable power system

• City data centre sites requiring additional power

• Public events requiring short-term power

• Military and remote installations

Space Optimising

A Riello Containerised Power Solution allows you to optimise space within your facility. No longer do you need dedicated space within your data centre facility or plant room. Simply sit the containerised solution where you need it and hook-up to pre-configured tails. This allows more of the building (especially on brown-field sites where space may be limited) to be used for critical IT infrastructure.

Full-Turnkey and Project Management

The Riello UPS team runs installations 365 days a year. Dedicated project managers will help you design, deliver and install the right configuration for your application. Full site surveys are provided in addition to CAD compatible drawings and documentation.

Pre-Delivery Configuration and Testing

The Riello Containerised Power Solution is designed for ‘quick and easy’ installation. Each system is pre-configured and tested to allow rapid deployment; responding to customer needs for emergency power or as part of an ongoing project. The Riello Containerised Power Solution has been specifically designed for:

• Ease of logistics: flatbed, Hiab delivery using a four-point lift.

• Mobility: forklift truck slots incorporated into the base of the unit.

• Ease of installation: central connection switchgear for resilient power.

• ‘Forced-air-cooling’ to remove the need for expensive air conditioning.

• Secure doors for ease of inspection and maintenance.

Without an associated battery-build on-site the system can be up and running within one hour to a pre-configured site. Riello Containerised Power Solutions can be hired to provide a ‘just-in-time’ response to demands for critical power; allowing organisations to focus their resources on their business, rather than investing in lengthy building projects.

Service and Maintenance

Riello UPS operate nationwide service facilities and spares depots. Whether you install a Containerised Power Solution or a single Modular Power Source UPS, full pre-sales support and after-sales service is provided by factory trained engineers. Each system can be remote monitored by a central service data centre, providing remote alarm monitoring and reporting, emergency response and schedule inspections.

Purchase or Hire

Our smaller Containerised Power Solutions are available for short-term hire to allow clients to perform their own-onsite tests prior to purchase or provide clean, resilient power for a specific event or project. This facility is subject to availability.

Seminars

Riello UPS offer CPD-certified training seminars on the PowerBox solution. For more information please contact our sales and projects team.

MODELS U.M. PowerBox 60.200.300 PowerBox 121.500.600

Features - UPS + Flywheel + Generator UPS + Flywheel + Generator

UPS Power kVA 1 x 200 1 x 500

Flywheel kW 1 x 300 1 x 600

Diesel* kVA 275 700

Input supply A 400 1000

UPS supply A 317 794

Batteries^ - Optional self-contained battery cabinet(s) Optional self-contained battery cabinet(s)

UPS output A 289 724

Dimensions cm [LxWxH] 605 x 243 x 253 [LxWxH] 1210 x 243 x 253

Container feet 20’ 40’

Weight kg 8000 15000

PowerBox Connections PowerBox Datasheet PowerBox Details

Master HP UPS

Flywheel and/or battery pack

Standby Generator &built-in fuel tank

UPS Flywheel

LOAD

CRITICAL LOAD

PowerBox

Generator

Master HP UPS is one of the most efficient and site compatible uninterruptible power systems available. An advanced IGBT-based rectifier ensures a ‘Zero Impact Source’ system with the following characteristics:

• Low input THDi (<2.5%)• High input Power Factor (0.99)• Power ‘walk-in’ with

progressive rectifier start-up• Delayed start-up when

mains power returns (parallel systems)

• High output Power Factor (0.9)• Compact size: 0.85m scalable

parallel operation up to 8 modules (N+1)

• Double load protection (electronic and galvanic)

• Flywheel energy storage

On mains power failure, a traditional UPS configuration uses a battery set to provide a DC energy source. Within the Clean Energy UPS, a flywheel provides this runtime, with the following advantages over a similar-sized battery set:

• Compact foot print and high energy density

• High reliability and efficiency (99%)

• ‘Instantaneous’ recharge (minutes compared to hours)

• Minimal maintenance and a long working life (> 20 years)

• Simple ‘self-contained’ installation

• Low Total Cost of Ownership• Optional parallel battery kits

The Modular Power Source UPS is available in 200kVA and 500kVA module sizes which can be paralleled to provide up to 4MW of clean power. The Modular Power Source UPS is a stand alone power protection and energy storage system.

The runtime available can be extended using parallel flywheels or installation of an additional battery extension pack. This is an option available within the Riello Modular Power Architecture. Within such an installation the flywheel would provide the first source of stored energy, protecting the batteries and prevent unnecessary discharges (typically 98%). The flywheel also provides the additional advantage of an almost ‘instantaneous’ recharge compared to the hours (or days) it can take for battery to recharge to 100% capacity.

PowerBox is available in several combinations. Two general configurations are shown in the table below using 20’ and 40’ containers, housing Riello UPS, a flywheel and generator set.Generator Panel &

Auto Transfer Switch

Note: * 8 hour fuel tank, 20 hour optional, ^ from 5-10 minutes or more to provide additional resilience

Containerised ArchitectureToday’s data centre market requires flexible power solutions. The PowerBox extends Riello’s power solutions range to provide containerised solutions that can be easily deployed and installed wherever and whenver needed, with minimal impact on existing plant room and faciltiies.

PowerBox provides a robust, highly resilient and efficient power solution with zero downtime, in a simple to install, low maintenance, self-contained configuration.

Each PowerBox can be configured from a range of standard Riello UPS systems to deliver a site specific solution:• UPS: 200kVA and 500kVA

modules with a full power rating of 4MVA/3.6MW

• Flywheels: 215kW and 300kW with parallel installation to extend the energy storage

• Battery Extension Packs installed for increased system resilience.

• Generators: running LPG (or diesel) to provide efficient extended runtimes up to 24 hours.

Options• Input isolation transformer• Closed-loop parallel

connection kits• Parallel group UPS

Synchronisation (USG)• Hot-system connection

(PSJ) • Generator interfaces (UPS

and flywheel)• External bypasses (UPS and

flywheel)• Battery extension packs

(cabinets or racks)• Remote status panels and

EPO facilities• Event logging and site

history alarm logs • Communications (MODBUS,

SNMP, Volt-free Contacts) • 24/7 Remote Monitoring

with 2, 4 or 8 hour response (location dependent)

Containerised Power Solution

The Riello PowerBox can be installed with components within a ‘stand-alone’ 20-foot or 40-foot container. Simple to deliver, connect and power-up, the Riello PowerBox is a highly-efficient and resilient power solution for:

• Modular data centres requiring a scalable power system

• City data centre sites requiring additional power

• Public events requiring short-term power

• Military and remote installations

Space Optimising

A Riello Containerised Power Solution allows you to optimise space within your facility. No longer do you need dedicated space within your data centre facility or plant room. Simply sit the containerised solution where you need it and hook-up to pre-configured tails. This allows more of the building (especially on brown-field sites where space may be limited) to be used for critical IT infrastructure.

Full-Turnkey and Project Management

The Riello UPS team runs installations 365 days a year. Dedicated project managers will help you design, deliver and install the right configuration for your application. Full site surveys are provided in addition to CAD compatible drawings and documentation.

Pre-Delivery Configuration and Testing

The Riello Containerised Power Solution is designed for ‘quick and easy’ installation. Each system is pre-configured and tested to allow rapid deployment; responding to customer needs for emergency power or as part of an ongoing project. The Riello Containerised Power Solution has been specifically designed for:

• Ease of logistics: flatbed, Hiab delivery using a four-point lift.

• Mobility: forklift truck slots incorporated into the base of the unit.

• Ease of installation: central connection switchgear for resilient power.

• ‘Forced-air-cooling’ to remove the need for expensive air conditioning.

• Secure doors for ease of inspection and maintenance.

Without an associated battery-build on-site the system can be up and running within one hour to a pre-configured site. Riello Containerised Power Solutions can be hired to provide a ‘just-in-time’ response to demands for critical power; allowing organisations to focus their resources on their business, rather than investing in lengthy building projects.

Service and Maintenance

Riello UPS operate nationwide service facilities and spares depots. Whether you install a Containerised Power Solution or a single Modular Power Source UPS, full pre-sales support and after-sales service is provided by factory trained engineers. Each system can be remote monitored by a central service data centre, providing remote alarm monitoring and reporting, emergency response and schedule inspections.

Purchase or Hire

Our smaller Containerised Power Solutions are available for short-term hire to allow clients to perform their own-onsite tests prior to purchase or provide clean, resilient power for a specific event or project. This facility is subject to availability.

Seminars

Riello UPS offer CPD-certified training seminars on the PowerBox solution. For more information please contact our sales and projects team.

MODELS U.M. PowerBox 60.200.300 PowerBox 121.500.600

Features - UPS + Flywheel + Generator UPS + Flywheel + Generator

UPS Power kVA 1 x 200 1 x 500

Flywheel kW 1 x 300 1 x 600

Diesel* kVA 275 700

Input supply A 400 1000

UPS supply A 317 794

Batteries^ - Optional self-contained battery cabinet(s) Optional self-contained battery cabinet(s)

UPS output A 289 724

Dimensions cm [LxWxH] 605 x 243 x 253 [LxWxH] 1210 x 243 x 253

Container feet 20’ 40’

Weight kg 8000 15000

PowerBox Connections PowerBox Datasheet PowerBox Details

Master HP UPS

Flywheel and/or battery pack

Standby Generator &built-in fuel tank

UPS Flywheel

LOAD

CRITICAL LOAD

PowerBox

Generator

Master HP UPS is one of the most efficient and site compatible uninterruptible power systems available. An advanced IGBT-based rectifier ensures a ‘Zero Impact Source’ system with the following characteristics:

• Low input THDi (<2.5%)• High input Power Factor (0.99)• Power ‘walk-in’ with

progressive rectifier start-up• Delayed start-up when

mains power returns (parallel systems)

• High output Power Factor (0.9)• Compact size: 0.85m scalable

parallel operation up to 8 modules (N+1)

• Double load protection (electronic and galvanic)

• Flywheel energy storage

On mains power failure, a traditional UPS configuration uses a battery set to provide a DC energy source. Within the Clean Energy UPS, a flywheel provides this runtime, with the following advantages over a similar-sized battery set:

• Compact foot print and high energy density

• High reliability and efficiency (99%)

• ‘Instantaneous’ recharge (minutes compared to hours)

• Minimal maintenance and a long working life (> 20 years)

• Simple ‘self-contained’ installation

• Low Total Cost of Ownership• Optional parallel battery kits

The Modular Power Source UPS is available in 200kVA and 500kVA module sizes which can be paralleled to provide up to 4MW of clean power. The Modular Power Source UPS is a stand alone power protection and energy storage system.

The runtime available can be extended using parallel flywheels or installation of an additional battery extension pack. This is an option available within the Riello Modular Power Architecture. Within such an installation the flywheel would provide the first source of stored energy, protecting the batteries and prevent unnecessary discharges (typically 98%). The flywheel also provides the additional advantage of an almost ‘instantaneous’ recharge compared to the hours (or days) it can take for battery to recharge to 100% capacity.

PowerBox is available in several combinations. Two general configurations are shown in the table below using 20’ and 40’ containers, housing Riello UPS, a flywheel and generator set.Generator Panel &

Auto Transfer Switch

Note: * 8 hour fuel tank, 20 hour optional, ^ from 5-10 minutes or more to provide additional resilience

Containerised ArchitectureToday’s data centre market requires flexible power solutions. The PowerBox extends Riello’s power solutions range to provide containerised solutions that can be easily deployed and installed wherever and whenver needed, with minimal impact on existing plant room and faciltiies.

PowerBox provides a robust, highly resilient and efficient power solution with zero downtime, in a simple to install, low maintenance, self-contained configuration.

Each PowerBox can be configured from a range of standard Riello UPS systems to deliver a site specific solution:• UPS: 200kVA and 500kVA

modules with a full power rating of 4MVA/3.6MW

• Flywheels: 215kW and 300kW with parallel installation to extend the energy storage

• Battery Extension Packs installed for increased system resilience.

• Generators: running LPG (or diesel) to provide efficient extended runtimes up to 24 hours.

Options• Input isolation transformer• Closed-loop parallel

connection kits• Parallel group UPS

Synchronisation (USG)• Hot-system connection

(PSJ) • Generator interfaces (UPS

and flywheel)• External bypasses (UPS and

flywheel)• Battery extension packs

(cabinets or racks)• Remote status panels and

EPO facilities• Event logging and site

history alarm logs • Communications (MODBUS,

SNMP, Volt-free Contacts) • 24/7 Remote Monitoring

with 2, 4 or 8 hour response (location dependent)

Containerised Power Solution

The Riello PowerBox can be installed with components within a ‘stand-alone’ 20-foot or 40-foot container. Simple to deliver, connect and power-up, the Riello PowerBox is a highly-efficient and resilient power solution for:

• Modular data centres requiring a scalable power system

• City data centre sites requiring additional power

• Public events requiring short-term power

• Military and remote installations

Space Optimising

A Riello Containerised Power Solution allows you to optimise space within your facility. No longer do you need dedicated space within your data centre facility or plant room. Simply sit the containerised solution where you need it and hook-up to pre-configured tails. This allows more of the building (especially on brown-field sites where space may be limited) to be used for critical IT infrastructure.

Full-Turnkey and Project Management

The Riello UPS team runs installations 365 days a year. Dedicated project managers will help you design, deliver and install the right configuration for your application. Full site surveys are provided in addition to CAD compatible drawings and documentation.

Pre-Delivery Configuration and Testing

The Riello Containerised Power Solution is designed for ‘quick and easy’ installation. Each system is pre-configured and tested to allow rapid deployment; responding to customer needs for emergency power or as part of an ongoing project. The Riello Containerised Power Solution has been specifically designed for:

• Ease of logistics: flatbed, Hiab delivery using a four-point lift.

• Mobility: forklift truck slots incorporated into the base of the unit.

• Ease of installation: central connection switchgear for resilient power.

• ‘Forced-air-cooling’ to remove the need for expensive air conditioning.

• Secure doors for ease of inspection and maintenance.

Without an associated battery-build on-site the system can be up and running within one hour to a pre-configured site. Riello Containerised Power Solutions can be hired to provide a ‘just-in-time’ response to demands for critical power; allowing organisations to focus their resources on their business, rather than investing in lengthy building projects.

Service and Maintenance

Riello UPS operate nationwide service facilities and spares depots. Whether you install a Containerised Power Solution or a single Modular Power Source UPS, full pre-sales support and after-sales service is provided by factory trained engineers. Each system can be remote monitored by a central service data centre, providing remote alarm monitoring and reporting, emergency response and schedule inspections.

Purchase or Hire

Our smaller Containerised Power Solutions are available for short-term hire to allow clients to perform their own-onsite tests prior to purchase or provide clean, resilient power for a specific event or project. This facility is subject to availability.

Seminars

Riello UPS offer CPD-certified training seminars on the PowerBox solution. For more information please contact our sales and projects team.

MODELS U.M. PowerBox 60.200.300 PowerBox 121.500.600

Features - UPS + Flywheel + Generator UPS + Flywheel + Generator

UPS Power kVA 1 x 200 1 x 500

Flywheel kW 1 x 300 1 x 600

Diesel* kVA 275 700

Input supply A 400 1000

UPS supply A 317 794

Batteries^ - Optional self-contained battery cabinet(s) Optional self-contained battery cabinet(s)

UPS output A 289 724

Dimensions cm [LxWxH] 605 x 243 x 253 [LxWxH] 1210 x 243 x 253

Container feet 20’ 40’

Weight kg 8000 15000

PowerBox Connections PowerBox Datasheet PowerBox Details

Master HP UPS

Flywheel and/or battery pack

Standby Generator &built-in fuel tank

UPS Flywheel

LOAD

CRITICAL LOAD

PowerBox

Generator

Master HP UPS is one of the most efficient and site compatible uninterruptible power systems available. An advanced IGBT-based rectifier ensures a ‘Zero Impact Source’ system with the following characteristics:

• Low input THDi (<2.5%)• High input Power Factor (0.99)• Power ‘walk-in’ with

progressive rectifier start-up• Delayed start-up when

mains power returns (parallel systems)

• High output Power Factor (0.9)• Compact size: 0.85m scalable

parallel operation up to 8 modules (N+1)

• Double load protection (electronic and galvanic)

• Flywheel energy storage

On mains power failure, a traditional UPS configuration uses a battery set to provide a DC energy source. Within the Clean Energy UPS, a flywheel provides this runtime, with the following advantages over a similar-sized battery set:

• Compact foot print and high energy density

• High reliability and efficiency (99%)

• ‘Instantaneous’ recharge (minutes compared to hours)

• Minimal maintenance and a long working life (> 20 years)

• Simple ‘self-contained’ installation

• Low Total Cost of Ownership• Optional parallel battery kits

The Modular Power Source UPS is available in 200kVA and 500kVA module sizes which can be paralleled to provide up to 4MW of clean power. The Modular Power Source UPS is a stand alone power protection and energy storage system.

The runtime available can be extended using parallel flywheels or installation of an additional battery extension pack. This is an option available within the Riello Modular Power Architecture. Within such an installation the flywheel would provide the first source of stored energy, protecting the batteries and prevent unnecessary discharges (typically 98%). The flywheel also provides the additional advantage of an almost ‘instantaneous’ recharge compared to the hours (or days) it can take for battery to recharge to 100% capacity.

PowerBox is available in several combinations. Two general configurations are shown in the table below using 20’ and 40’ containers, housing Riello UPS, a flywheel and generator set.Generator Panel &

Auto Transfer Switch

Note: * 8 hour fuel tank, 20 hour optional, ^ from 5-10 minutes or more to provide additional resilience

Containerised Power Solutions meet Riello’s stringent requirements for eco-friendly power protection systems. Their high operating efficiency saves energy and reduces operating costs (Opex). The energy savings achievable are configuration dependent and can typically lead to Capex recovery within 5 years.

ECO Friendly UPS

Compact and Efficient

A flywheel enabled Riello UPS is the nearest you can get to a ‘fit-and-forget’ power protection system. The flywheel module runs on ‘frictionless’ bearings within a vacuum at 36000rpm. Unlike competitor systems, there is no need for a bearing change or the risk of damage that can result from a loss of vacuum within the flywheel cabinet. An annual inspection with minimal preventative maintenance is all that is needed to ensure your system is in the best of health.

Simplified Maintenance

The flywheel concept is an established ‘green’ battery replacement technology and one being used by leading data centre architects. Compact footprints, fast Capex recovery and high operating efficiencies help to provide an impressively low TCO. Cost savings in future battery inspection, monitoring and replacement can be up to 60% with further reductions in operating costs.

Low Total Cost of Ownership

High reliability is the hallmark of a transformer-based UPS like the Master HP series. The electronics are time-tried and used within thousands of critical installations, covering city centre sites to the harshest remote conditions. Scalable (N+1) modular architecture further improves system resilience - up to 8 UPS modules – for a truly fault-tolerant system.

Reliable and Resilient Modules

Riello UPS are some of the most compact available. Using a flywheel in place of a traditionally sized (10 minute) runtime battery pack can achieve an overall system footprint reduction of 50-75%. The flywheel provides sufficient time for generator start-up but can also be used in series with a battery pack to protect the battery from the effects of ‘hardening’ - helping to extend the useful working life of a battery set.

Reliable power for a sustainable world

The complete range of power solutions from desktops to datacenters

Uninterruptible Power Supplies from 400VA to 6MVA

Centralised Battery Supplies and Standby Power Systems

Static Switches

Generators

Inverters

Flywheels

TeleNetGuard 24/7 remote site monitoring

International service

RPS spa - Viale Europa, 7 - 37045 Legnago (Verona) - Italywww.riello-ups.com - info@riello-ups.com

Riello UPS Ltd - Sales: 0800 269 394 - Service - 0800 298 5355www.riello-ups.co.uk - sales@riello-ups.co.uk

Introducing PowerBox

PowerBox provides uninterruptible power, wherever and whenever you need it. Each PowerBox is project configurable to provide critical systems with a site specific power solution. PowerBox is a self-contained power solution that can be delivered, installed and working within hours.

Each PowerBox contains all the necessary switchgear and distribution panels to deliver uninterruptible power from a combination power solution which can include: a Riello UPS, flywheel energy storage system, battery packs, and suitably rated generator.

Riello UPS Master series

standalone/N+1

Vycon Flywheel system and/or battery pack

Elcos Standby PowerGenerator with

built-in fuel tank

Riello Containerised Power Solution - the PowerBox

Reliable power for a sustainable world

The complete range of power solutions from desktops to datacenters

Uninterruptible Power Supplies from 400VA to 6MVA

Centralised Battery Supplies and Standby Power Systems

Static Switches

Generators

Inverters

Flywheels

TeleNetGuard 24/7 remote site monitoring

International service

Ashdale Engineering Limited T: 44 28 9078 3000 www.ashdale.co.uk | info@ashdale.co.uk