Upload
others
View
0
Download
0
Embed Size (px)
Citation preview
Professional Access Control© 2016 Ernitec. All rights reserved
www.ernitec.com
ErnitecTempovej 41
2750 BallerupDenmark
Follow us on
Professional Access Control – For Your Safety
AsguardReaders & Credentials
Professional Access Control© 2016 Ernitec. All rights reserved
www.ernitec.com
ErnitecTempovej 41
2750 BallerupDenmark
Follow us on
Professional Access Control – For Your Safety
Description
The H2B is flush mounted and low profile, and is
compatible with our range of MIFARE®®, MIFARE®
DESFire® EV1 and 125kHz. contactless cards. Multi-
technology reader configurations are available for
sites transitioning between credential technologies.
The electronics are fully encapsulated providing
superior ingress protection and durability.
Interoperability
The H2B contactless card reader operates using
international ISO, interoperability standards
including ISO14443A, making it compatible with
many popular access control systems.
Key Security
The MIFARE® card technology utilised by the H2B
requires a matched key in the card and the reader
for data to transmit. This authentication key is a
highly secure 64bit key which can be customised
per site.
Asgard Card ReaderAsguard H2B
• MIFARE® Reader
• MIFARE Plus® Reader
• MIFARE® DESFire® Reader
• Dual Tech Reader
• Backlit Logo With Doorbell
• Displays Hotel Room Status
• Polycarbonate Fascia
• Wiegand or encrypted RS485 output options
• IP67 Environmental Rating
• 3 year Warranty
Card Credential Options
Dual Tech
The reader can use both the MIFARE® and the Prox
technology, ideal to taking over old systems.
MIFARE Classic® 1K / 4K
Employs a proprietary protocol compliant to 1-3 of ISO/IEC 14443 Type A, with an NXP proprietary security protocol for authentication and ciphering.
MIFARE Plus®
Drop-in replacement for MIFARE Classic® 1K / 4K with certified security level (AES 128 based) and is fully backwards compatible with MIFARE Classic®.
MIFARE® DESFire® EV1 2K
Our smart cards comply to ISO/IEC 14443-4 Type A with a mask-ROM operating system from NXP. The 'DES' in the name refers to the use of DES, 2K3DES, 3K3DES and AES hardware cryptographic engine for securing transmission data; while 'Fire' is an acronym for 'Fast, innovative, reliable and enhanced'.
Professional Access Control© 2016 Ernitec. All rights reserved
www.ernitec.com
ErnitecTempovej 41
2750 BallerupDenmark
Follow us on
We reserve the right to introduct product modifications without notice
DISTRBUTED BY
Technical Specification Asguard H2B Series
Transmission Transmit Frequency 13.56MHz
Output Protocol Wiegand: 26BIT As standard or Customer specifiedRS485 Encrypted (AES-128BIT)Requires EM-1 Encryption Module
Read Range 5cm (Typical)Card Type MIFARE® ISO 14443 Type APowerStatus LED Tri-Colour LED: Red/Green/YellowInput voltage +5VDC to +16VDCCurrent 200mA (active) @ 12VDC
Enclosure MaterialMaterial High Impact Polycarbonate Enclosure
Acrylic Image Customized for each HotelEncapsulated ElectronicsPolycarbonate Enclosure
Colour BlackIP rating IP67CablesCable Distance Wiegand: 150m :22 AWG Wire
RS485: 1000m :22 AWG Wire
OperatingOperating temperature -10℃ TO +65℃Storage temperature -10℃~70℃.Relative humidity 85% MAX (non-
condensing).Mounting Flush Mount Design
Compatible With UK Double Gangbox
Audible Tone Internal & ExternalBuzzer
Certifications FCC : CE : C-TICKGeneralPackage Asguard H2B
Dimensions 155 x 80 x 6mmWeight (Net)Warranty 3 yearsPart numbersAsguard H2B-P Prox Reader 0065-02045Asguard H2B- M MIFARE® Reader 0065-02046Asguard H2B-MP MIFARE® + Reader 0065-02047Asguard H2B-EV MIFARE® DESFire® Reader 0065-02048Asguard H2B-D Dual Tech Reader 0065-02049
Asguard H1
Alternative Reader
Credential Options
Asguard 10A1-EC MIFARE® 1K Card 0065-02051
Asguard 10A4-EC MIFARE® 4K Card 0065-02053
Asguard 10B1-EC MIFARE® 1K Fob 0065-02055
Asguard 10D1-EC MIFARE® 1K Disc 0065-02057
Asguard 21A2-EC MIFARE Plus® 2K Card 0065-02059
Asguard 30A4-EC MIFARE® DESFire® EV1 4K Card 0065-02063
Asguard 30B4-EC MIFARE® DESFire® EV1 4K Fob 0065-02065
Asguard 30D4-EC MIFARE® DESFire® EV1 4K Disc
0065-02067
Professional Access Control© 2016 Ernitec. All rights reserved
www.ernitec.com
ErnitecTempovej 41
2750 BallerupDenmark
Follow us on
Professional Access Control – For Your Safety
Description
The H1 is flush mounted and low profile, and is
compatible with our range of MIFARE®, MIFARE®
DESFire® EV1 and 125kHz. contactless cards. Multi-
technology reader configurations are available for
sites transitioning between credential technologies.
The electronics are fully encapsulated providing
superior ingress protection and durability.
Interoperability
The H1 contactless card reader operates using
international ISO, interoperability standards
including ISO14443A, making it compatible with
many popular access control systems.
Key Security
The MIFARE® card technology utilised by the H1
requires a matched key in the card and the reader
for data to transmit. This authentication key is a
highly secure 64bit key which can be customised
per site.
Asgard Card ReaderAsguard H1
• MIFARE® Reader
• MIFARE Plus® Reader
• MIFARE® DESFire® Reader
• Dual Tech Reader
• Backlit User Defined Logo With Doorbell
• Displays Hotel Room Status
• Polycarbonate Fascia
• Wiegand or encrypted RS485 output options
• IP67 Environmental Rating
• 3 year Warranty
Card Credential Options
Dual Tech
The reader can use both the MIFARE® and the Prox
technology, ideal to taking over old systems.
MIFARE Classic®
Employs a proprietary protocol compliant to 1-3 of ISO/IEC 14443 Type A, with an NXP proprietary security protocol for authentication and ciphering.
MIFARE Plus®
Drop-in replacement for MIFARE Classic® 1K / 4K with certified security level (AES 128 based) and is fully backwards compatible with MIFARE Classic®.
MIFARE® DESFire® EV1
Our smart cards comply to ISO/IEC 14443-4 Type A with a mask-ROM operating system from NXP. The 'DES' in the name refers to the use of DES, 2K3DES, 3K3DES and AES hardware cryptographic engine for securing transmission data; while 'Fire' is an acronym for 'Fast, innovative, reliable and enhanced'.
Professional Access Control© 2016 Ernitec. All rights reserved
www.ernitec.com
ErnitecTempovej 41
2750 BallerupDenmark
Follow us on
We reserve the right to introduct product modifications without notice
DISTRBUTED BY
Technical Specification Asguard H1 Series
Transmission Transmit Frequency 13.56MHz
Output Protocol Wiegand: 26BIT As standard or Customer specifiedRS485 Encrypted (AES-128BIT)Requires EM-1 Encryption Module
Read Range 5cm (Typical)Card Type MIFARE® ISO 14443 Type APowerStatus LED Tri-Colour LED: Red/Green/YellowInput voltage +5VDC to +16VDCCurrent 165mA (active) @ 12VDC
Enclosure MaterialMaterial High Impact Polycarbonate Enclosure
Acrylic Image Customized for each HotelEncapsulated ElectronicsPolycarbonate Enclosure
Colour BlackIP rating IP67CablesCable Distance Wiegand: 150m :22 AWG Wire
RS485: 1000m :22 AWG Wire
OperatingOperating temperature -10℃ TO +65℃Storage temperature -10℃~70℃.Relative humidity 85% MAX (non-
condensing).Mounting Flush Mount Design
Compatible With UK Gangbox
Audible Tone Internal & ExternalBuzzer
Certifications FCC : CE : C-TICKGeneralPackage Asguard H1
Dimensions 95 x 95 x 6mmWeight (Net)Warranty 3 yearsPart numbersAsguard H1-P Prox Reader 0065-02040Asguard H1- M MIFARE® Reader 0065-02041Asguard H1-MP MIFARE® + Reader 0065-02042Asguard H1-EV MIFARE® DESFire® Reader 0065-02043Asguard H1-D Dual Tech Reader 0065-02044
Asguard H2B
Alternative Reader
Credential Options
Asguard 10A1-EC MIFARE® 1K Card 0065-02051
Asguard 10A4-EC MIFARE® 4K Card 0065-02053
Asguard 10B1-EC MIFARE® 1K Fob 0065-02055
Asguard 10D1-EC MIFARE® 1K Disc 0065-02057
Asguard 21A2-EC MIFARE Plus® 2K Card 0065-02059
Asguard 30A4-EC MIFARE® DESFire® EV1 4K Card 0065-02063
Asguard 30B4-EC MIFARE® DESFire® EV1 4K Fob 0065-02065
Asguard 30D4-EC MIFARE® DESFire® EV1 4K Disc
0065-02067
Professional Access Control© 2016 Ernitec. All rights reserved
www.ernitec.com
ErnitecTempovej 41
2750 BallerupDenmark
Follow us on
Professional Access Control – For Your Safety
Description
The F1-G is flush mounted, featuring a highly aesthetic toughened glass fascia. The F1-G is compatible with our range of MIFARE®, MIFARE® DESFire® EV1 and 125kHz contactless cards. Multi-technology reader configurations are available for sites transitioning between credential technologies. The electronics are fully encapsulated, providing superior ingress protection and durability. Fits into UK gang box.
Interoperability
The F1-G contactless card reader operates using international ISO, interoperability standards including ISO14443A, making it compatible with many popular access control systems.
Key Security
The MIFARE® card technology utilised by the F1-G requires a matched key in the card and the reader for data to transmit. This authentication key is a highly secure 64bit key which can be customised per site.
Asgard Card ReaderAsguard F1-G
• MIFARE® Reader
• MIFARE Plus® Reader
• MIFARE® DESFire® Reader
• Dual Tech Reader
• 125 KHz Proximity
• Toughened Glass Fascia
• Colour Options Charcoal or White
• Flush Mount / UK Gangbox Mounting
• Wiegand or encrypted RS485 output options
• IP67 Environmental Rating
• 3 year Warranty
Card Credential Options
Dual Tech
The reader can use both the MIFARE® and the Prox
technology, ideal to taking over old systems.
MIFARE Classic®
Employs a proprietary protocol compliant to 1-3 of ISO/IEC 14443 Type A, with an NXP proprietary security protocol for authentication and ciphering.
MIFARE Plus®
Drop-in replacement for MIFARE Classic® 1K / 4K with certified security level (AES 128 based) and is fully backwards compatible with MIFARE Classic®.
MIFARE® DESFire® EV1
Our smart cards comply to ISO/IEC 14443-4 Type A with a mask-ROM operating system from NXP. The 'DES' in the name refers to the use of DES, 2K3DES, 3K3DES and AES hardware cryptographic engine for securing transmission data; while 'Fire' is an acronym for 'Fast, innovative, reliable and enhanced'.
Professional Access Control© 2016 Ernitec. All rights reserved
www.ernitec.com
ErnitecTempovej 41
2750 BallerupDenmark
Follow us on
We reserve the right to introduct product modifications without notice
DISTRBUTED BY
Technical Specification Asguard F1-G Series
Transmission Transmit Frequency 13.56MHz : 125KHzOutput Protocol Wiegand: 26BIT As standard or
Customer specifiedRS485 Encrypted (AES-128BIT) withEM-1 module
Read Range 5 cm (Typical)Card Type MIFARE® ISO 14443 Type APowerStatus LED Bi-Colour LED: Red / GreenInput voltage +5VDC to +16VDCCurrent 65mA (active) @ 12VDC / 130mA
(active) @ 5VDCEnclosure MaterialMaterial Toughened Glass Fascia
Polycarbonate EnclosureEncapsulated ElectronicsHigh Impact Polycarbonate Enclosure
Colour Charcoal or WhiteIP rating IP67CablesCable Distance Wiegand: 150m :22 AWG Wire
RS485: 1000m :22 AWG Wire
OperatingOperating temperature -10℃ TO +65℃Storage temperature -10℃~70℃.Relative humidity 90% MAX (non-
condensing).Mounting Flush Mount Design
compatible to UK Gangbox
Audible Tone BuzzerCertifications FCC : CE : C-TICK
GeneralPackage Asguard F1-G
Dimensions 90 x 90 x 3mmWeight (Net)Warranty 3 yearsPart NumbersAsguard F1G-P Prox Reader 0065-02021Asguard F1G- M MIFARE® Reader 0065-02022Asguard F1G-MP Maifare + Reader 0065-02023Asguard F1G-EV MIFARE® MIFARE® DESFire®® Reader 0065-02024Asguard F1G-D Dual Tech Reader 0065-02025Asguard F1G-P Prox Reader 0065-02021-WAsguard F1G- M MIFARE® Reader 0065-02022-WAsguard F1G-MP Maifare + Reader 0065-02023-WAsguard F1G-EV MIFARE® DESFire® Reader 0065-02024-WAsguard F1G-D Dual Tech Reader 0065-02025-W
Asguard F1
Alternative Readers
Credential Options
Asguard 10A1-EC MIFARE® 1K Card 0065-02051
Asguard 10A4-EC MIFARE® 4K Card 0065-02053
Asguard 10B1-EC MIFARE® 1K Fob 0065-02055
Asguard 10D1-EC MIFARE® 1K Disc 0065-02057
Asguard 21A2-EC MIFARE Plus® 2K Card 0065-02059
Asguard 30A4-EC MIFARE® DESFire® EV1 4K Card 0065-02063
Asguard 30B4-EC MIFARE® DESFire® EV1 4K Fob 0065-02065
Asguard 30D4-EC MIFARE® DESFire® EV1 4K Disc 0065-02067
Professional Access Control© 2016 Ernitec. All rights reserved
www.ernitec.com
ErnitecTempovej 41
2750 BallerupDenmark
Follow us on
Professional Access Control – For Your Safety
Description
The F1 is flush mounted, and is compatible with our
range of MIFARE®, MIFARE® DESFire® EV1 and
125kHz. contactless cards. Multi- technology reader
configurations are available for sites transitioning
between credential technologies. The electronics
are fully encapsulated providing superior ingress
protection and durability. Security screws required
for UK gang box fitting.
Interoperability
The F1 contactless card reader operates using
international ISO, interoperability standards
including ISO14443A, making it compatible with
many popular access control systems.
Key Security
The MIFARE® card technology utilised by the F1
requires a matched key in the card and the reader
for data to transmit. This authentication key is a
highly secure 64bit key which can be customised
per site.
Asgard Card ReaderAsguard F1
• MIFARE® Reader
• MIFARE Plus® Reader
• MIFARE® DESFire® Reader
• Dual Tech Reader
• 125 KHz Proximity
• Flush Mount / UK Gangbox Mounting
• Polycarbonate Fascia
• Wiegand or encrypted RS485 output options
• IP67 Environmental Rating
• 3 year Warranty
Card Credential Options
Dual Tech
The reader can use both the MIFARE® and the Prox
technology, ideal to taking over old systems.
MIFARE Classic®
Employs a proprietary protocol compliant to 1-3 of ISO/IEC 14443 Type A, with an NXP proprietary security protocol for authentication and ciphering.
MIFARE Plus®
Drop-in replacement for MIFARE Classic® 1K / 4K with certified security level (AES 128 based) and is fully backwards compatible with MIFARE Classic®.
MIFARE® DESFire® EV1
Our smart cards comply to ISO/IEC 14443-4 Type A with a mask-ROM operating system from NXP. The 'DES' in the name refers to the use of DES, 2K3DES, 3K3DES and AES hardware cryptographic engine for securing transmission data; while 'Fire' is an acronym for 'Fast, innovative, reliable and enhanced'.
Professional Access Control© 2016 Ernitec. All rights reserved
www.ernitec.com
ErnitecTempovej 41
2750 BallerupDenmark
Follow us on
We reserve the right to introduct product modifications without notice
DISTRBUTED BY
Technical Specification Asguard F1 Series
Transmission Transmit Frequency 13.56MHz : 125KHzOutput Protocol Wiegand: 26BIT As standard or
Customer specifiedRS485 Encrypted (AES-128BIT) EM1 module required
Read Range 5 cm (Typical)Card Type MIFARE® ISO 14443 Type APowerStatus LED Bi-Colour LED: Red / GreenInput voltage +5VDC to +16VDCCurrent 65mA (active) @ 12VDC / 130mA
(active) @ 5VDCEnclosure MaterialMaterial Polycarbonate Enclosure
Encapsulated Electronics
High Impact Polycarbonate EnclosureColour CharcoalIP rating IP67CablesCable Distance Wiegand: 150m :22 AWG Wire
RS485: 1000m :22 AWG Wire
OperatingOperating temperature -10℃ TO +65℃Storage temperature -10℃~70℃.Relative humidity 90% MAX (non-condensing).Mounting Flush Mount Design compatible
to UK GangboxAudible Tone BuzzerCertifications FCC : CE : C-TICKGeneralPackage Asguard F1Dimensions 90 x 90 x 3mmWeight (Net)Warranty 3 yearsPart NumberAsguard F1-P Prox Reader 0065-02016Asguard F1- M MIFARE® Reader 0065-02017Asguard F1-MP Maifare + Reader 0065-02018Asguard F1-EV MIFARE® DESFire® Reader 0065-02019Asguard F1-D Dual Tech Reader 0065-02020
Asguard F1-G
Alternative Readers
Credential Options
Asguard 10A1-EC MIFARE® 1K Card 0065-02051
Asguard 10A4-EC MIFARE® 4K Card 0065-02053
Asguard 10B1-EC MIFARE® 1K Fob 0065-02055
Asguard 10D1-EC MIFARE® 1K Disc 0065-02057
Asguard 21A2-EC MIFARE Plus® 2K Card 0065-02059
Asguard 30A4-EC MIFARE® DESFire® EV1 4K Card 0065-02063
Asguard 30B4-EC MIFARE® DESFire® EV1 4K Fob 0065-02065
Asguard 30D4-EC MIFARE® DESFire® EV1 4K Disc 0065-02067
Professional Access Control© 2016 Ernitec. All rights reserved
www.ernitec.com
ErnitecTempovej 41
2750 BallerupDenmark
Follow us on
Professional Access Control – For Your Safety
Description
The Asguard S1 series surface mounted and low
profile, featuring a snap on protective cover and is
compatible with our range of MIFARE®, MIFARE®
DESFire® EV1 and 125kHz. contactless cards. Multi-
technology reader configurations are available for
sites transitioning between credential technologies.
The electronics are fully encapsulated providing
superior ingress protection and durability.
Interoperability
The S1 contactless card readers operates using
international ISO, interoperability standards
including ISO14443A, making it compatible with
many popular access control systems.
Key Security
The MIFARE® card technology utilised by the S1
Series requires a matched key in the card and the
reader for data to transmit. This authentication key
is a highly secure 64bit key which can be customised
per site.
Asgard Card ReaderAsguard S1
• Contactless 5-10cm Reader Range
• MIFARE® Reader
• MIFARE Plus® Reader
• MIFARE® DESFire® Reader
• Dual Tech Reader
• 125 KHz Proximity
• Surface Mount
• Polycarbonate
• Wiegand or encrypted RS485 output options
• IP67 Environmental Rating
• 3 year Warranty
Card Credential Options
Dual Tech
The reader can use both the MIFARE® and the Prox
technology, ideal to taking over old systems.
MIFARE Classic®
Employs a proprietary protocol compliant to 1-3 of ISO/IEC 14443 Type A, with an NXP proprietary security protocol for authentication and ciphering.
MIFARE Plus®
Drop-in replacement for MIFARE Classic® 1K / 4K with certified security level (AES 128 based) and is fully backwards compatible with MIFARE Classic®.
MIFARE® DESFire® EV1
Our smart cards comply to ISO/IEC 14443-4 Type A with a mask-ROM operating system from NXP. The 'DES' in the name refers to the use of DES, 2K3DES, 3K3DES and AES hardware cryptographic engine for securing transmission data; while 'Fire' is an acronym for 'Fast, innovative, reliable and enhanced'.
Professional Access Control© 2016 Ernitec. All rights reserved
www.ernitec.com
ErnitecTempovej 41
2750 BallerupDenmark
Follow us on
We reserve the right to introduct product modifications without notice
DISTRBUTED BY
Technical Specification Asguard S1 Series
Transmission Transmit Frequency 13.56MHz : 125kHz
Output Protocol Wiegand: 26BIT As standard or Customer specifiedRS485 Encrypted (AES-128BIT) EM1 module required
Read Range 5 cm (Typical)Card Type MIFARE® ISO 14443 Type APowerStatus LED BI-Colour LED: Red/GreenInput voltage +5VDC to 16VDCCurrent 65mA (active) @ 12VDC / 130mA
(active) @ 5VDCEnclosure MaterialMaterial High Impact Polycarbonate
Encapsulated ElectronicsEnclosure Polycarbonate EnclosureColour CharcoalIP rating IP67CablesCable Distance Wiegand: 150m :22 AWG Wire
RS485: 1000m :22 AWG Wire
OperatingOperating temperature -10℃ TO +65℃Storage temperature -10℃~70℃.Relative humidity 90% MAX (non-
condensing).Mounting Surface Mount Design
compatible to UK Gangbox
Audible Tone BuzzerCertifications FCC : CE : C-TICK
GeneralPackage Asguard S1
Dimensions 90 x 90 x 18mmWeight (Net)Warranty 3 yearsPart numbersAsguard S1-P Prox Reader 0065-02001Asguard S1-M MIFARE® Reader 0065-02002
Asguard S1-MP MIFARE® + Reader 0065-02003
Asguard S1-EV MIFARE® DESFire® Reader0065-02004Asguard S1-D Dual Tech Reader 0065-02005
Asguard S3 Asguard S4 Asguard S5
Alternative Readers
Credential Options
Asguard 10A1-EC MIFARE® 1K Card 0065-02051
Asguard 10A4-EC MIFARE® 4K Card 0065-02053
Asguard 10B1-EC MIFARE® 1K Fob 0065-02055
Asguard 10D1-EC MIFARE® 1K Disc 0065-02057
Asguard 21A2-EC MIFARE Plus® 2K Card 0065-02059
Asguard 30A4-EC MIFARE® DESFire® EV1 4K Card 0065-02063
Asguard 30B4-EC MIFARE® DESFire® EV1 4K Fob 0065-02065
Asguard 30D4-EC MIFARE® DESFire® EV1 4K Disc 0065-02067
Professional Access Control© 2016 Ernitec. All rights reserved
www.ernitec.com
ErnitecTempovej 41
2750 BallerupDenmark
Follow us on
Professional Access Control – For Your Safety
Description
The Asguard S3 series surface mounted and low
profile, featuring a snap on protective cover and is
compatible with our range of MIFARE®, MIFARE®
DESFire® EV1 and 125kHz contactless cards. Multi-
technology reader configurations are available for
sites transitioning between credential technologies.
The electronics are fully encapsulated providing
superior ingress protection and durability.
Interoperability
The S3 contactless card readers operates using
international ISO, interoperability standards
including ISO14443A, making it compatible with
many popular access control systems.
Key Security
The MIFARE® card technology utilised by the S3
Series requires a matched key in the card and the
reader for data to transmit. This authentication key
is a highly secure 64bit key which can be customised
per site.
Asgard Card ReaderAsguard S3
• Contactless Reader
• MIFARE® Reader
• MIFARE Plus® Reader
• MIFARE® DESFire® EV1 Reader
• Prox Reader
• Dual Tech Reader
• Surface Mount
• Wiegand or encrypted RS485 output options
• IP67 Environmental Rating
• 3 year Warranty
Card Credential Options
Dual Tech
The reader can use both the MIFARE® and the Prox
technology, ideal to taking over old systems.
MIFARE Classic®
Employs a proprietary protocol compliant to 1-3 of ISO/IEC 14443 Type A, with an NXP proprietary security protocol for authentication and ciphering.
MIFARE Plus®
Drop-in replacement for MIFARE Classic® 1K / 4K with certified security level (AES 128 based) and is fully backwards compatible with MIFARE Classic®.
MIFARE® DESFire® EV1
Our smart cards comply to ISO/IEC 14443-4 Type A with a mask-ROM operating system from NXP. The 'DES' in the name refers to the use of DES, 2K3DES, 3K3DES and AES hardware cryptographic engine for securing transmission data; while 'Fire' is an acronym for 'Fast, innovative, reliable and enhanced'.
Professional Access Control© 2016 Ernitec. All rights reserved
www.ernitec.com
ErnitecTempovej 41
2750 BallerupDenmark
Follow us on
We reserve the right to introduct product modifications without notice
DISTRBUTED BY
Technical Specification Asguard S3 Series
Transmission Transmit Frequency 13.56MHz : 125kHz
Output Protocol Wiegand: 26BIT As standard or Customer specifiedRS485 Encrypted (AES-128BIT) EM1 module required
Read Range 5 cm (Typical)Card Type MIFARE® ISO 14443 Type APowerStatus LED BI-Colour LED: Red/GreenInput voltage +5VDC to 16VDCCurrent 65mA (active) @ 12VDC / 130mA
(active) @ 5VDCEnclosure MaterialMaterial High Impact Polycarbonate
Encapsulated ElectronicsEnclosure Polycarbonate EnclosureColour CharcoalIP rating IP67CablesCable Distance Wiegand: 150m :22 AWG Wire
RS485: 1000m :22 AWG Wire
OperatingOperating temperature -10℃ TO +65℃Storage temperature -10℃~70℃.Relative humidity 90% MAX (non-condensing).
Mounting Surface Mount Design compatible to MullionMounting
Audible Tone Buzzer
Certifications FCC : CE : C-TICK
GeneralPackage Asguard S3
Dimensions 45,6 x 106 x 18mm
Weight (Net)
Warranty 3 years
Part numbers
Asguard S3-P Prox Reader 0065-02006
Asguard S3-M MIFARE® Reader 0065-02007
Asguard S3-MP MIFARE® + Reader
0065-02008
Asguard S3-EV MIFARE® DESFire® Reader
0065-02009
Asguard S3-D Dual Tech Reader 0065-02010
Asguard S1 Asguard S4 Asguard S5
Alternative Readers
Credential Options
Asguard 10A1-EC MIFARE® 1K Card 0065-02051
Asguard 10A4-EC MIFARE® 4K Card 0065-02053
Asguard 10B1-EC MIFARE® 1K Fob 0065-02055
Asguard 10D1-EC MIFARE® 1K Disc 0065-02057
Asguard 21A2-EC MIFARE Plus® 2K Card 0065-02059
Asguard 30A4-EC MIFARE® DESFire® EV1 4K Card 0065-02063
Asguard 30B4-EC MIFARE® DESFire® EV1 4K Fob 0065-02065
Asguard 30D4-EC MIFARE® DESFire® EV1 4K Disc 0065-02067
Professional Access Control© 2016 Ernitec. All rights reserved
www.ernitec.com
ErnitecTempovej 41
2750 BallerupDenmark
Follow us on
Professional Access Control – For Your Safety
Description
The Asguard S4 series surface mounted and low
profile, featuring a snap on protective cover and is
compatible with our range of MIFARE®, MIFARE®
DESFire® EV1 and 125kHz contactless cards. Multi-
technology reader configurations are available for
sites transitioning between credential technologies.
The electronics are fully encapsulated providing
superior ingress protection and durability.
Interoperability
The S4 contactless card readers operates using
international ISO, interoperability standards
including ISO14443A, making it compatible with
many popular access control systems.
Key Security
The MIFARE® card technology utilised by the S4
Series requires a matched key in the card and the
reader for data to transmit. This authentication key
is a highly secure 64bit key which can be customised
per site.
Asgard Card ReaderAsguard S4 Mid Range
• Contactless 15-20cm Reader Range
• MIFARE® Reader
• MIFARE Plus® Reader
• MIFARE® DESFire® EV1 Reader
• Prox Reader
• Dual Tech Reader
• Surface Mount
• Wiegand or encrypted RS485 output options
• IP67 Environmental Rating
• 3 year Warranty
Card Credential Options
Dual Tech
The reader can use both the MIFARE® and the Prox
technology, ideal to taking over old systems.
MIFARE Classic®
Employs a proprietary protocol compliant to 1-3 of ISO/IEC 14443 Type A, with an NXP proprietary security protocol for authentication and ciphering.
MIFARE Plus®
Drop-in replacement for MIFARE Classic® 1K / 4K with certified security level (AES 128 based) and is fully backwards compatible with MIFARE Classic®.
MIFARE® DESFire® EV1
Our smart cards comply to ISO/IEC 14443-4 Type A with a mask-ROM operating system from NXP. The 'DES' in the name refers to the use of DES, 2K3DES, 3K3DES and AES hardware cryptographic engine for securing transmission data; while 'Fire' is an acronym for 'Fast, innovative, reliable and enhanced'.
Professional Access Control© 2016 Ernitec. All rights reserved
www.ernitec.com
ErnitecTempovej 41
2750 BallerupDenmark
Follow us on
We reserve the right to introduct product modifications without notice
Technical Specification Asguard S4 Series
Transmission Transmit Frequency 13.56MHz : 125kHz
Output Protocol Wiegand: 26BIT As standard or Customer specifiedRS485 Encrypted (AES-128BIT) EM1 module required
Read Range 10 /15cm (13.56MHz)15/20 cm (125KHz)
Card Type MIFARE® ISO 14443 Type APowerStatus LED BI-Colour LED: Red/GreenInput voltage +5VDC to 16VDCCurrent 65mA (active) @ 12VDC / 130mA
(active) @ 5VDCEnclosure MaterialMaterial High Impact Polycarbonate
Encapsulated ElectronicsEnclosure Polycarbonate EnclosureColour CharcoalIP rating IP67CablesCable Distance Wiegand: 150m :22 AWG Wire
RS485: 1000m :22 AWG Wire
OperatingOperating temperature -10℃ TO +65℃Storage temperature -10℃~70℃.Relative humidity 90% MAX (non-condensing).
Mounting Surface Mount Design
Audible Tone Buzzer
Certifications FCC : CE : C-TICK
General
Package Asguard S4
Dimensions 180 x 180 x 18mm
Weight (Net)
Warranty 3 years
Part numbers
Asguard S4-P Prox Reader 0065-02011
Asguard S4-M MIFARE® Reader 0065-02012
Asguard S4-MP MIFARE® + Reader
0065-02013
Asguard S4-EV MIFARE® DESFire® Reader
0065-02014
Asguard S4-D Dual Tech Reader 0065-02015
Asguard S1 Asguard S3 Asguard S5
Alternative Readers
Credential Options
Asguard 10A1-EC MIFARE® 1K Card 0065-02051
Asguard 10A4-EC MIFARE® 4K Card 0065-02053
Asguard 10B1-EC MIFARE® 1K Fob 0065-02055
Asguard 10D1-EC MIFARE® 1K Disc 0065-02057
Asguard 21A2-EC MIFARE Plus® 2K Card 0065-02059
Asguard 30A4-EC MIFARE® DESFire® EV1 4K Card 0065-02063
Asguard 30B4-EC MIFARE® DESFire® EV1 4K Fob 0065-02065
Asguard 30D4-EC MIFARE® DESFire® EV1 4K Disc 0065-02067
Professional Access Control© 2016 Ernitec. All rights reserved
www.ernitec.com
ErnitecTempovej 41
2750 BallerupDenmark
Follow us on
Professional Access Control – For Your Safety
Description
The Asguard S5 The long range RFID series of
readers have a typical read range of 5m (S5-5
model) or 10m (S5-10) and are suited to
carpark entry and exit locations. The enclosure
is compact and outdoor rated. The reader
reads Alien H3 tags that are available in a
variety of forms including windscreen adhesive
label, ISO card and moulded tag. Standard
output is wiegand in a range of formats
including 26bit. Other output protocols are
available on request.
Protocol
ISO-18000-6 (B OR C)
Data Output
Wiegand Standard 26bit data output.
Asgard Card ReaderAsguard S5-5 and S5-10
• UHF Long Range Contactless Reader
• Compact Enclosure
• RFID Carpark Solution
• Range 5M and 10M
• IP67 Environmental Rating
• 1 year Warranty
Card Credential Options
We offer a broad range of UHF credentials that
provide solutions to typical access control and logistics
applications. Our credentials utilise the Alien Higgs-3
transponder which offers superior longevity and
performance.
UFH Adhesive Windshield Label
MIFARE® Card and UHF
Key Ring Fob
Professional Access Control© 2016 Ernitec. All rights reserved
www.ernitec.com
ErnitecTempovej 41
2750 BallerupDenmark
Follow us on
We reserve the right to introduct product modifications without notice
Technical Specification Asguard S5 Series
Transmission
Transmit Frequency 902-928 MHzOutput Protocol Wiegand: 26BIT
RS232RS485
Read RangeModel Dependant
5 Mtr 10 Mtr
Credentials Alien H3 Tags and LabelsPowerStatus LED BI-Colour LED: Red/GreenInput voltage 7.5VDC to 12VDC / 3ACurrent 65mA (active) @ 12VDC / 130mA
(active) @ 5VDCEnclosure MaterialMaterial High Impact Polycarbonate
Encapsulated ElectronicsEnclosure Polycarbonate EnclosureColour ICharcoalIP rating IP65CablesCable Distance Wiegand: 150m :22 AWG Wire
RS485: 1000m :22 AWG Wire
OperatingOperating temperature -10℃ TO +65℃Storage temperature -10℃~70℃.Relative humidity 90% MAX (non-condensing).
Mounting Bracket & Pole
Audible Tone
Certifications FCC : CE : C-TICK
General
Package Asguard S2
Dimensions 5MDimensions 10M
280 x 280 x 40mm480 x 480 x 50mm
Weight (Net)
Warranty 1 years
Part numbers
Asguard S5-5 UHF 5M Reader 0065-02026
Asguard S5-5 UHF 10M Reader 0065-02027
Asguard S5-10
Alternative Readers
Credential Options
Asguard 40G-EC Long Range UHF Label 0065-02069
Asguard 40B-EC Long Range UHF FOB 0065-02071
Asguard 40/10A1-EC Dual Tech UHF Card 0065-02073
Professional Access Control© 2016 Ernitec. All rights reserved
www.ernitec.com
ErnitecTempovej 41
2750 BallerupDenmark
Follow us on
Professional Access Control – For Your Safety
Description
The D5 incorporates our access control card reader
with keypad technology, and is suitable for outdoor
use. The D5 is compatible with our range of
MIFARE®, MIFARE® DESFire® EV1 and 125kHz
contactless cards. The electronics are fully
encapsulated providing superior ingress protection
and durability.
Interoperability
The D5 contactless card reader operates using
international ISO, interoperability standards
including ISO14443A, making it compatible with
many popular access control systems.
Key Security
The MIFARE® card technology utilised by the D5
requires a matched key in the card and the reader
for data to transmit. This authentication key is a
highly secure 64bit key which can be customised
per site.
Asgard Keypad Card ReaderAsguard D5
• MIFARE® Reader
• MIFARE Plus® Reader
• MIFARE® DESFire® Reader
• Dual Tech Reader
• 125 KHz Proximity
• Superior Ingress Protection
• Silver or Gold Aluminium/Polycarbonate
• Wiegand or encrypted RS485 output options
• IP67 Environmental Rating
• 3 year Warranty
Card Credential Options
Dual Tech
The reader can use both the MIFARE® and the Prox
technology, ideal to taking over old systems.
MIFARE Classic®
Employs a proprietary protocol compliant to 1-3 of ISO/IEC 14443 Type A, with an NXP proprietary security protocol for authentication and ciphering.
MIFARE Plus®
Drop-in replacement for MIFARE Classic® 1K / 4K with certified security level (AES 128 based) and is fully backwards compatible with MIFARE Classic®.
MIFARE® DESFire® EV1
Our smart cards comply to ISO/IEC 14443-4 Type A with a mask-ROM operating system from NXP. The 'DES' in the name refers to the use of DES, 2K3DES, 3K3DES and AES hardware cryptographic engine for securing transmission data; while 'Fire' is an acronym for 'Fast, innovative, reliable and enhanced'.
Professional Access Control© 2016 Ernitec. All rights reserved
www.ernitec.com
ErnitecTempovej 41
2750 BallerupDenmark
Follow us on
We reserve the right to introduct product modifications without notice
Technical Specification Asguard D5 Series
Transmission Transmit Frequency 13.56MHz : 125KHzOutput Protocol Wiegand: 26BIT As standard or
Customer specifiedRS485 Encrypted (AES-128BIT) EM1 module required
Read Range 5 cm (Typical)Card Type MIFARE® ISO 14443 Type APowerStatus LED Tri-Colour LED: Red/Green/YellowInput voltage +5VDC to +16VDCCurrent 122mA (active) @ 12VDC
Enclosure MaterialMaterial Aluminium Shroud
Polycarbonate EnclosureEncapsulated ElectronicsHigh Impact Polycarbonate Enclosure
Colour Silver / CharcoalIP rating IP67CablesCable Distance Wiegand: 150m :22 AWG Wire
RS485: 1000m :22 AWG WireKeypad
Keypad 3 x 4 With Backlight / Various outputs available
OperatingOperating temperature -10℃ TO +65℃Storage temperature -10℃~70℃.Relative humidity 90% MAX (non-
condensing).MountingAudible Tone BuzzerCertifications FCC : CE : C-TICKGeneralPackage Asguard D5Dimensions 85 x 120 x 26mmWeight (Net)Warranty 3 yearsPart NumbersAsguard D5-MP MIFARE® + Reader 0065-02028Asguard D5-EV MIFARE® DESFire® Reader 0065-02029Asguard D5-D Dual Tech Reader 0065-02030Asguard D5-M MIFARE® Reader 0065-02031Asguard D5-MP-G MIFARE® + Reader 0065-02028-GAsguard D5-EV-G MIFARE® DESFire® Reader 0065-02029-GAsguard D5-D-G Dual Tech Reader 0065-02030-GAsguard D5-M-G MIFARE® Reader 0065-02031-G
Asguard D6 Asguard D7
Alternative Readers
Credential Options
Asguard 10A1-EC MIFARE® 1K Card 0065-02051
Asguard 10A4-EC MIFARE® 4K Card 0065-02053
Asguard 10B1-EC MIFARE® 1K Fob 0065-02055
Asguard 10D1-EC MIFARE® 1K Disc 0065-02057
Asguard 21A2-EC MIFARE Plus® 2K Card 0065-02059
Asguard 30A4-EC MIFARE® DESFire® EV1 4K Card 0065-02063
Asguard 30B4-EC MIFARE® DESFire® EV1 4K Fob 0065-02065
Asguard 30D4-EC MIFARE® DESFire® EV1 4K Disc 0065-02067
Asguard D5-G
Professional Access Control© 2016 Ernitec. All rights reserved
www.ernitec.com
ErnitecTempovej 41
2750 BallerupDenmark
Follow us on
Professional Access Control – For Your Safety
Description
The Asguard D6 series incorporates our card reader with a genuine Safran Morpo Fingerprint Scanner. The D6 is uniquely designed in a semi-recessed configuration allowing the finished mounting to be very low profile for a biometric device. The enclosure is both rugged and stylish: with fully encapsulated electronics, the D6 is suitable for outdoor use. With it’s anodized aluminium surround, the D6 offers a high level of style and visual appeal.
Interoperability
The D6 contactless card reader operates using international ISO, interoperability standards including ISO14443A, making it compatible with many popular access control systems.
Key Security
The MIFARE® card technology utilised by the D6 requires a matched key in the card and the reader for data to transmit. This authentication key is a highly secure 64bit key which can be customised per site.
Asgard Biometric Card ReaderAsguard D6
• MIFARE® Reader
• MIFARE Plus® Reader
• MIFARE® DESFire® Reader
• Dual Tech Reader
• Safran Morpo Optical Biometric Finger Scanner
• Low profile design
• Aluminium/Polycarbonate
• Wiegand or encrypted RS485 output options
• IP67 Environmental Rating
• 3 year Warranty
Card Credential Options
Dual Tech
The reader can use both the MIFARE® and the Prox
technology, ideal to taking over old systems.
MIFARE Classic®
Employs a proprietary protocol compliant to 1-3 of ISO/IEC 14443 Type A, with an NXP proprietary security protocol for authentication and ciphering.
MIFARE Plus®
Drop-in replacement for MIFARE Classic® 1K / 4K with certified security level (AES 128 based) and is fully backwards compatible with MIFARE Classic®.
MIFARE® DESFire® EV1
Our smart cards comply to ISO/IEC 14443-4 Type A with a mask-ROM operating system from NXP. The 'DES' in the name refers to the use of DES, 2K3DES, 3K3DES and AES hardware cryptographic engine for securing transmission data; while 'Fire' is an acronym for 'Fast, innovative, reliable and enhanced'.
Professional Access Control© 2016 Ernitec. All rights reserved
www.ernitec.com
ErnitecTempovej 41
2750 BallerupDenmark
Follow us on
We reserve the right to introduct product modifications without notice
Technical Specification Asguard D6 Series
Transmission Transmit Frequency 13.56MHz : 125 kHz
Output Protocol Wiegand: 26BIT As standard or Customer specifiedRS485 Encrypted (AES-128BIT)Requires EM-1 Encryption Module
Read Range 5cm (Typical)Card Type MIFARE® ISO 14443 Type APowerStatus LED Tri-Colour LED: Red/Green/YellowInput voltage 12VDC + 16VDCCurrent 12VDC / 215mA (active) @ 5VDC
Enclosure MaterialMaterial Aluminium Surround
Polycarbonate EnclosureEncapsulated ElectronicsPolycarbonate Enclosure
Colour Charcoal with gunmetal surroundIP rating IP65CablesCable Distance Wiegand: 150m :22 AWG Wire
RS485: 1000m :22 AWG WireFingerprint ScannerType Safran Morpho Optical ScannerVandal resistant 500DPI Capture ResolutionTemplate Formats Morpho Proprietary, ISO 19794-2
ANSI/INCITS 378
OperatingOperating temperature -10℃ TO +65℃Storage temperature -10℃~70℃.Relative humidity 90% MAX
(non-condensing).Mounting Semi-Recessed design
supplied wall bracketAudible Tone BuzzerCertifications FCC : CE : C-TICKGeneralPackage Asguard D6
Dimensions 79 x 128 x 18mmWeight (Net)Warranty 3 yearsPart numbersAsguard D6-M MIFARE® Reader 0065-02032Asguard D6-MP MIFARE® + Reader 0065-02033Asguard D6-EV MIFARE® DESFire® Reader 0065-02034Asguard D6-D Dual Tech Reader 0065-02035
Asguard D7 Asguard D5
Credential Options
Asguard 10A1-EC MIFARE® 1K Card 0065-02051
Asguard 10A4-EC MIFARE® 4K Card 0065-02053
Asguard 10B1-EC MIFARE® 1K Fob 0065-02055
Asguard 10D1-EC MIFARE® 1K Disc 0065-02057
Asguard 21A2-EC MIFARE Plus® 2K Card 0065-02059
Asguard 30A4-EC MIFARE® DESFire® EV1 4K Card 0065-02063
Asguard 30B4-EC MIFARE® DESFire® EV1 4K Fob 0065-02065
Asguard 30D4-EC MIFARE® DESFire® EV1 4K Disc 0065-02067
Alternative Readers
Genuine Safran Morpho components inside
Professional Access Control© 2016 Ernitec. All rights reserved
www.ernitec.com
ErnitecTempovej 41
2750 BallerupDenmark
Follow us on
Professional Access Control – For Your Safety
Description
The Asguard D7 series incorporates our MIFARE® card reader with Keypad and a genuine SafranMorpo Fingerprint Scanner. The D7 is uniquely designed in a semi-recessed configuration allowing the finished mounting to be very low profile for a biometric device. The enclosure is both rugged and stylish: with fully encapsulated electronics, the D7 is suitable for outdoor use. With it’s anodized aluminium surround, the D7 offers a high level of visual style and appeal.
Interoperability
The D7 contactless card reader operates using international ISO, interoperability standards including ISO14443A, making it compatible with many popular access control systems.
Key Security
The MIFARE® card technology utilised by the D7 requires a matched key in the card and the reader for data to transmit. This authentication key is a highly secure 64bit key which can be customised per site.
Asgard Biometric Card ReaderAsguard D7
• MIFARE® Reader
• MIFARE Plus® Reader
• MIFARE® DESFire® Reader
• Dual Tech Reader
• Safran Morpho Optical Biometric Finger Scanner
• Keypad for Triple Protection
• Low profile design: Semi-recessed
• Aluminium/Polycarbonate
• Wiegand or encrypted RS485 output options
• IP65 Environmental Rating
• 1 year Warranty
Card Credential Options
Dual Tech
The reader can use both the MIFARE® and the Prox
technology, ideal to taking over old systems.
MIFARE Classic®
Employs a proprietary protocol compliant to 1-3 of ISO/IEC 14443 Type A, with an NXP proprietary security protocol for authentication and ciphering.
MIFARE Plus®
Drop-in replacement for MIFARE Classic® 1K / 4K with certified security level (AES 128 based) and is fully backwards compatible with MIFARE Classic®.
MIFARE® DESFire® EV1
Our smart cards comply to ISO/IEC 14443-4 Type A with a mask-ROM operating system from NXP. The 'DES' in the name refers to the use of DES, 2K3DES, 3K3DES and AES hardware cryptographic engine for securing transmission data; while 'Fire' is an acronym for 'Fast, innovative, reliable and enhanced'.
Professional Access Control© 2016 Ernitec. All rights reserved
www.ernitec.com
ErnitecTempovej 41
2750 BallerupDenmark
Follow us on
We reserve the right to introduct product modifications without notice
Technical Specification Asguard D7 Series
Transmission Transmit Frequency 13.56MHz
Output Protocol Wiegand: 26BIT As standard or Customer specifiedRS485 Encrypted (AES-128BIT)Requires EM-1 Encryption Module
Read Range 4.5cm (Typical)Card Type MIFARE® ISO 14443 Type APowerStatus LED Tri-Colour LED: Red/Green/YellowInput voltage 12VDCCurrent 65mA (active) @ 12VDC / 130mA
(active) @ 5VDCEnclosure MaterialMaterial Aluminium Surround
Polycarbonate EnclosureEncapsulated ElectronicsPolycarbonate Enclosure
Colour Charcoal with gunmetal surroundIP rating IP65CablesCable Distance Wiegand: 150m :22 AWG Wire
RS485: 1000m :22 AWG WireFingerprint ScannerType Safran Morpho Optical ScannerVandal resistant 500DPI Capture ResolutionTemplate Formats Morpho Proprietary, ISO 19794-2
ANSI/INCITS 378
OperatingOperating temperature -10℃ TO +55℃Storage temperature -10℃~70℃.Relative humidity 85% MAX
(non-condensing).Mounting Semi-Recessed design
supplied wall bracketAudible Tone BuzzerCertifications FCC : CE : C-TICKGeneralPackage Asguard D7
Dimensions 79 x 148 x 18mmWeight (Net)Warranty 1 yearsPart numbersAsguard D7-M MIFARE® Reader 0065-02036Asguard D7-MP MIFARE® + Reader 0065-02037
Asguard D7-EV MIFARE® DESFire® Reader
0065-02038
Asguard D7-D Dual Tech Reader 0065-02039
Asguard D7-M MIFARE® Reader 0065-02036-GAsguard D7-MP MIFARE® + Reader 0065-02037-G
Asguard D7-EV MIFARE® DESFire® Reader
0065-02038-G
Asguard D7-D Dual Tech Reader 0065-02039-G
Asguard D6 Asguard D5
Alternative Readers
Credential Options
Asguard 10A1-EC MIFARE® 1K Card 0065-02051
Asguard 10A4-EC MIFARE® 4K Card 0065-02053
Asguard 10B1-EC MIFARE® 1K Fob 0065-02055
Asguard 10D1-EC MIFARE® 1K Disc 0065-02057
Asguard 21A2-EC MIFARE Plus® 2K Card 0065-02059
Asguard 30A4-EC MIFARE® DESFire® EV1 4K Card 0065-02063
Asguard 30B4-EC MIFARE® DESFire® EV1 4K Fob 0065-02065
Asguard 30D4-EC MIFARE® DESFire® EV1 4K Disc 0065-02067
Asguard D7
Genuine Safran Morpho components inside
Professional Access Control© 2016 Ernitec. All rights reserved
www.ernitec.com
ErnitecTempovej 41
2750 BallerupDenmark
Follow us on
Professional Access Control – For Your Safety
Description
The Asguard B1 series is mounted behind a fascia, such as in lifts and turnstiles and is compatible with a range of of contactless card technologies including MIFARE, DESFire EV1 and 125kHz. Multi-technology reader configurations are available for sites transitioning between credential technologies. The electronics are fully encapsulated providing superior ingress protection and durability.
Interoperability
The Asguard B1 contactless card readers operates using international ISO, interoperability standards including ISO14443A, making it compatible with many popular card technologies.
Key Security
The Mifare card technology utilised by the B1 Series requires a matched key in the card and the reader for data to transmit. This authentication key is a highly secure 64bit key which can be customised per site.
Mifare Classic
Employs a proprietary protocol compliant to 1-3 of ISO/IEC 14443 Type A, with an NXP proprietarysecurity protocol for authentication and ciphering.
Mifare plus
Drop-in replacement for MIFARE Classic with certified security level (AES 128 based) and is fully backwards compatible with MIFARE Classic.
Desfire EV1
Are smart cards that comply to ISO/IEC 14443-4 Type A with a mask-ROM operating system from NXP. The 'DES' in the name refers to the use of DES, 2K3DES, 3K3DES and AES hardware cryptographic engine for securing transmission data; while 'Fire' is an acronym for 'Fast, innovative, reliable and enhanced'.
Dual Tech
The reader can use both the Mifare and the Proxtechnology.
Card Reader
Asguard B1 SERIES
• Contactless Reader
• Mifare Reader
• Mifare Plus Reader
• Desfire EV1 Reader
• Prox Reader
• Dual Tech Reader
• Mounted behind fascia
• IP67
• Wiegand or encrypted RS485 output options
• 3 year Warranty
Professional Access Control© 2016 Ernitec. All rights reserved
www.ernitec.com
ErnitecTempovej 41
2750 BallerupDenmark
Follow us on
We reserve the right to introduct product modifications without notice
DISTRBUTED BY
Technical Specification Asguard B1 Series
Transmission Transmit Frequency 13.56MHz : 125kHz
Output Protocol Wiegand: 26BIT As standard or Customer specifiedRS485 Encrypted (AES-128BIT)
Read Range 5 cm (Typical)Card Type Mifare ISO 14443 Type APowerStatus LED BI-Colour LED: Red/GreenInput voltage +5VDC to 16VDCCurrent 65mA (active) @ 12VDC / 130mA
(active) @ 5VDCEnclosure MaterialMaterial High Impact Polycarbonate
Encapsulated ElectronicsEnclosure Polycarbonate EnclosureColour BlackIP rating IP67CablesCable Distance Wiegand: 150m :22 AWG Wire
RS485: 1000m :22 AWG Wire
OperatingOperating temperature -10℃ TO +65℃Storage temperature -10℃~70℃.Relative humidity 90% MAX (non-
condensing).Mounting Mounted behind fascia
with double sided tapeAudible Tone BuzzerCertifications FCC : CE : C-TICKGeneralPackage Asguard B1
Dimensions 67 x 50 x 17mmWeight (Net)Warranty 3 yearsPart numbersAsguard B1-P Prox Reader 0065-02082Asguard B1-M Mifare Reader 0065-02083
Asguard B1-MP Mifare + Reader 0065-02084
Asguard B1-EV Desfire Reader 0065-02085Asguard B1-D Dual Tech Reader 0065-02086
Asguard S3 Asguard S4 Asguard S5
Alternative Readers
Credential Options
Asguard 10A1 Mifare Card 0065-02050
Asguard 10A1-EC Mifare Card 0065-02051
Asguard 10A4 Mifare Card 0065-02052
Asguard 10A4-EC Mifare Card 0065-02053
Asguard 10B1 Mifare Fob 0065-02054
Asguard 10B1-EC Mifare Fob 0065-02055
Asguard 10D1 Mifare Disc 0065-02056
Asguard 10D1-EC Mifare Disc 0065-02057
Asguard 21A2 Mifare Plus Card 0065-02058
Asguard 21A2-EC Mifare Plus Card 0065-02059
Asguard 21A4 Mifare Plus Card 0065-02060
Asguard 21A4-EC Mifare Plus Card 0065-02061
Asguard 30A4 Desfire Plus Card 0065-02062
Asguard 30A4-EC Desfire Plus Card 0065-02063
Asguard 30B4 Desfire Plus Fob 0065-02064
Asguard 30B4-EC Desfire Plus Fob 0065-02065
Asguard 30D4 Desfire Plus Fob 0065-02066
Asguard 30D4-EC Desfire Plus Fob 0065-02067
Professional Access Control© 2016 Ernitec. All rights reserved
www.ernitec.com
ErnitecTempovej 41
2750 BallerupDenmark
Follow us on
Professional Access Control – For Your Safety
Description
The EC01 contactless card encoder is a USB device that works with Ernitec card encoding software.
It can encode MIFARE Classic®, MIFARE® MIFARE® DESFire® EV1 2K The encoder comes with 100 card activations.
Description
The EB01 contactless card encoder is a USB device that works with Ernitec card encoding software.
It can encode fingerprint templates onto the following card types: MIFARE Classic®, MIFARE® MIFARE® DESFire® EV1 . The encoder comes with 100 card activations.
Asguard EC01
Asguard EB01
Asgard Contactless Card EncodersAsguard EC01 & EB01
• MIFARE® Card Encoder (EC01)
• MIFARE® DESFire® EV1 Encoder
• USB Connectivity
• Polycarbonate Casing
• Fingerprint Sensor (EB01)
• 2 year Warranty
Card Credential Options for EC01
Dual Tech
The reader can use both the MIFARE® and the Prox
technology, ideal to taking over old systems.
MIFARE Classic®
Employs a proprietary protocol compliant to 1-3 of ISO/IEC 14443 Type A, with an NXP proprietary security protocol for authentication and ciphering.
MIFARE Plus®
Drop-in replacement for MIFARE Classic® 1K / 4 Kwithcertified security level (AES 128 based) and is fully backwards compatible with MIFARE Classic®.
MIFARE® DESFire® EV1
Our smart cards comply to ISO/IEC 14443-4 Type A with a mask-ROM operating system from NXP. The 'DES' in the name refers to the use of DES, 2K3DES, 3K3DES and AES hardware cryptographic engine for securing transmission data; while 'Fire' is an acronym for 'Fast, innovative, reliable and enhanced'.
Professional Access Control© 2016 Ernitec. All rights reserved
www.ernitec.com
ErnitecTempovej 41
2750 BallerupDenmark
Follow us on
We reserve the right to introduct product modifications without notice
Technical Specification Asguard EC01 & Asguard EB01
Transmission Transmit Frequency USB
Output Protocol NARead RangeCard Type MIFARE Classic®, MIFARE Plus®,
MIFARE® MIFARE® DESFire® EV1Power
Input voltage VIA USBStatus LED BI-Colour LED: Red/GreenEnclosure MaterialMaterial High Impact PolycarbonateColour CharcoalCablesCable Distance Wiegand: 150m :22 AWG Wire
RS485: 1000m :22 AWG WireCertificationsCertifications FCC : CE : C-TICKOperatingOperating temperature -10℃ TO +65℃Storage temperature -10℃~70℃.Relative Humidity 90% MAX (non-condensing).Audible Tone BuzzerGeneralPackage Asguard EC01Dimensions 74 x 84 x 25 mmWeight (Net)Warranty 3 yearsPart numbers
Asguard EC01-M CARD ENCODER 0065-02074
Asguard EC01-MP CARD ENCODER 0065-02075
Asguard EC01-D CARD ENCODER 0065-02076Options100 Card Activations Included500 Card Activations 0065-02080
2000 Card Activations 0065-02081
Transmission Transmit Frequency USB
Output Protocol NARead RangeCard Type MIFARE Classic®, MIFARE Plus®,
MIFARE® MIFARE® DESFire® EV1Power
Input voltage VIA USBStatus LED BI-Colour LED: Red/GreenFingerprint SensorFingerprint Sensor Safran Morpho Optical Finger
ScannerVandal Resistant: 500DPI Capture Resolution
Template Formats Morpho ProprietaryISO 19794-2 ANSI/INCITS 378
Enclosure MaterialMaterial High Impact PolycarbonateColour CharcoalCablesCable Distance Wiegand: 150m :22 AWG Wire
RS485: 1000m :22 AWG WireCertificationsCertifications FCC : CE : C-TICKOperatingOperating temperature -10℃ TO +65℃Storage temperature -10℃~70℃.Relative Humidity 90% MAX (non-condensing).Audible Tone BuzzerGeneralPackage Asguard EB01Dimensions 74 x 131 x 25 mmWeight (Net)Warranty 3 yearsPart numbers
Asguard EB01 CARD ENCODER 0065-02077
Asguard EC01 Asguard EB01
Professional Access Control© 2016 Ernitec. All rights reserved
www.ernitec.com
ErnitecTempovej 41
2750 BallerupDenmark
Follow us on
Professional Access Control – For Your Safety
Description
The MIFARE Classic® 1K / 4Kfamily of credentials covers credentials covers contactless smartcard credentials used in access control, public transport, loyalty cards and many more. Fully compliant with ISO/IEC 14443 Type A, our credentials are available with 1 KB and 4 KB memory, and 7 byte or 4byte identifiers (card serial numbers).
Chip typeMIFARE Classic® 1K 1024 byte EEPROM
MIFARE Classic® 4K 4096 Byte EEPROMMemory Structure
MIFARE Classic® 1K 16 Sectors (64 BYTE)MIFARE Classic® 4K 32 Sectors (64 Byte) OR
8 Sectors (256 Byte)Communication Rate 106 KBITS/S
RF Interface ISO 14443 A, Parts 1-3
Read RangeTypical Read Range 4-8 Cm Card reader dependantPrinting Card surface is optimised for dye
sublimation printingFinish Gloss WhiteIP rating IP68Materials PVC
OperatingOperating Frequency 13.56MHz
Operating temperature -25℃ TO +50℃Operative humidity 5% - 95% MAX operational
(non-condensing).ROHS YES
General
Package Asguard ISO Card
Dimensions 5.40 x 8.57 x 0.084cm MAX
Weight (Net) 6.0g
Warranty 3 years under normal use
Specifications
Asguard FOB Asguard Adhesive Disc
Alternative Credentials
Asgard ISO CredentialAsguard 1K Card
• MIFARE® 1K Access Card
• Credential for access control applications
• Genuine NXP MIFARE® Chip
• 13.56MHz antenna
Credential Options
Asguard 10A1-EC MIFARE® 1K Card 0065-02051
Asguard 10A4-EC MIFARE® 4K Card 0065-02053
Asguard 10B1-EC MIFARE® 1K Fob 0065-02055
Asguard 10D1-EC MIFARE® 1K Disc 0065-02057
Asguard 21A2-EC MIFARE Plus® 2K Card 0065-02059
Asguard 30A4-EC MIFARE® DESFire® EV1 4K Card 0065-02063
Asguard 30B4-EC MIFARE® DESFire® EV1 4K Fob 0065-02065
Asguard 30D4-EC MIFARE® DESFire® EV1 4K Disc 0065-02067
Asguard 40G-EC UHF Alien H3 Screen Label 0065-02069
Asguard 40B-EC UHF Alien H3 FOB 0065-02071
Asguard 40/10A1-EC MIFARE® 1K + UHF Card 0065-02073
Professional Access Control© 2016 Ernitec. All rights reserved
www.ernitec.com
ErnitecTempovej 41
2750 BallerupDenmark
Follow us on
Professional Access Control – For Your Safety
Description
The MIFARE Classic® 1K / 4Kfamily of credentials covers credentials covers contactless smartcard credentials used in access control, public transport, loyalty cards and many more. Fully compliant with ISO/IEC 14443 Type A, our credentials are available with 1 KB and 4 KB memory, and 7 byte or 4byte identifiers (card serial numbers).
Chip typeMIFARE Classic® 1K 1024 byte EEPROM
MIFARE Classic® 4K 4096 Byte EEPROMMemory Structure
MIFARE Classic® 1K 16 Sectors (64 BYTE)MIFARE Classic® 4K 32 Sectors (64 Byte) OR
8 Sectors (256 Byte)Communication Rate 106 KBITS/S
RF Interface ISO 14443 A, Parts 1-3
Read RangeTypical Read Range 4-8 Cm Card reader dependantPrintingFinish Gloss WhiteIP rating IP68Materials PVC
OperatingOperating Frequency 13.56MHz
Operating temperature -25℃ TO +50℃Operative humidity 5% - 95% MAX operational
(non-condensing).ROHS Yes
General
Package Asguard Adhesive Disc
Dimensions 3.0 x 0.084cm MAX
Weight (Net) 2.0g
Warranty 3 years
Specifications
Asguard FOB Asguard Adhesive Disc
Alternative Credentials
Asgard ISO CredentialAsguard Adhesive Disc
• Credential for access control applications
• 30mm Adhesive Disc
• Genuine NXP MIFARE® Chip
• 13.56MHz Antenna
Credential Options
Asguard 10A1-EC MIFARE® 1K Card 0065-02051
Asguard 10A4-EC MIFARE® 4K Card 0065-02053
Asguard 10B1-EC MIFARE® 1K Fob 0065-02055
Asguard 10D1-EC MIFARE® 1K Disc 0065-02057
Asguard 21A2-EC MIFARE Plus® 2K Card 0065-02059
Asguard 30A4-EC MIFARE® DESFire® EV1 4K Card 0065-02063
Asguard 30B4-EC MIFARE® DESFire® EV1 4K Fob 0065-02065
Asguard 30D4-EC MIFARE® DESFire® EV1 4K Disc 0065-02067
Asguard 40G-EC UHF Alien H3 Screen Label 0065-02069
Asguard 40B-EC UHF Alien H3 FOB 0065-02071
Asguard 40/10A1-EC MIFARE® 1K + UHF Card 0065-02073
Professional Access Control© 2016 Ernitec. All rights reserved
www.ernitec.com
ErnitecTempovej 41
2750 BallerupDenmark
Follow us on
Professional Access Control – For Your Safety
Description
The MIFARE Classic® 1K / 4Kfamily of credentials covers contactless smartcard credentials used in access control, public transport, loyalty cards and many more. Fully compliant with ISO/IEC 14443 Type A, our credentials are available with 1 KB and 4 KB memory, and 7 byte or 4byte identifiers (card serial numbers).
Chip typeMIFARE Classic® 1K 1024 byte EEPROM
MIFARE Classic® 4K 4096 Byte EEPROMMemory Structure
MIFARE Classic® 1K 16 Sectors (64 BYTE)MIFARE Classic® 4K 32 Sectors (64 Byte) OR
8 Sectors (256 Byte)Communication Rate 106 KBITS/S
RF Interface ISO 14443 A, Parts 1-3
Read RangeTypical Read Range 4-8 Cm Card reader dependantPrinting FOB includes printed area to laser ETCH
user numberFinish BlackIP rating IP68Materials PA6 Nylon
OperatingOperating Frequency 13.56MHz
Operating temperature -25℃ TO +50℃Operative humidity 5% - 95% MAX operational
(non-condensing).ROHS Yes
General
Package Asguard FOB
Dimensions 3.0 x 4.5 x 0.16cm MAX
Weight (Net) 3.0g
Warranty 3 years
Specifications
Asguard ISO CardAsguard Adhesive Disc
Alternative Credentials
Asgard ISO CredentialAsguard FOB
• Credential for access control applications
• Overmolded Pear Shape Keyfob
• Genuine NXP MIFARE® Chip
• 13.56MHz antenna
Credential Options
Asguard 10A1-EC MIFARE® 1K Card 0065-02051
Asguard 10A4-EC MIFARE® 4K Card 0065-02053
Asguard 10B1-EC MIFARE® 1K Fob 0065-02055
Asguard 10D1-EC MIFARE® 1K Disc 0065-02057
Asguard 21A2-EC MIFARE Plus® 2K Card 0065-02059
Asguard 30A4-EC MIFARE® DESFire® EV1 4K Card 0065-02063
Asguard 30B4-EC MIFARE® DESFire® EV1 4K Fob 0065-02065
Asguard 30D4-EC MIFARE® DESFire® EV1 4K Disc 0065-02067
Asguard 40G-EC UHF Alien H3 Screen Label 0065-02069
Asguard 40B-EC UHF Alien H3 FOB 0065-02071
Asguard 40/10A1-EC MIFARE® 1K + UHF Card 0065-02073
Professional Access Control© 2016 Ernitec. All rights reserved
www.ernitec.com
ErnitecTempovej 41
2750 BallerupDenmark
Follow us on
Professional Access Control – For Your Safety
Description
Ernitec offers a broad range of UHF credentials that provide solutions to typical access control and logistics applications. Our credentials utilise the Alien Higgs-3 transponder which offers superior longevity and performance.
For access control applications, UHF is primarily used for carpark access applications. For this we have a UHF windshield tag that is purpose built for harsh temperatures and operation during rain. Alternatively a personal UHF key fob may be utilised.
For sites looking to avoid having a separate credential for access to the building and access to the carpark, we offer a dual technology ISO combi card which will work with both the UHF reader as well as access control card readers on the rest of the site.
Credentials UHF
Asguard ISO Card
SpecificationsUHF ISO Card FOB LabelUHF Transponder Alien HIGGS-3UHF Frequency 860-960 MHz (Region dependent)
UHF Memory 800 Bits non volatile memory : 96 EPC Bits /512 User Bits / 64 Bit UID / 32 Bit Access and 32 Bit kill passwords
Compatibility Meets EPC global GEN2 (V1.2.0) And ISO.IED 18000-6C
General ISO Card FOB Label
Frequency Options MIFARE® : MIFARE Plus® : MIFARE® MIFARE® DESFire® EV1
NO NO
Dimensions 85.6 x 54 x 0.76mm 56 x 32 x 8mm 68 x 26mm
Material PVC Polycarbonate Polypropylene / Adhesive Backed
IP Class IP66
Operating Temperature -40 degC to +85degC
Part Numbers ISO Card FOB Label
Asguard 40/10A10065-02072
Asguard 40B0065-02070
Asguard 40G0065-02068
Asguard 40/10A1-EC0065-02073
Asguard 40B-EC0065-02071
Asguard 40G-EC0065-02069
Asguard UHF FOB Asguard UHF Label
DISTRBUTED BY
R0
2EN
05
18