As400 System Admin Certification

Exam : IBM 000971

Title :

Update : Sep012008

System I Administrator v5.07.11

version2.00

http://www.KillTest.com

| English | Chinese(Traditional) | Chinese(Simplified) | 2 KillTest Information Co., Ltd. All rights reserved.

1.Which of the following describes a PTF that can be applied without a system IPL? A.A Standard PTF B.A Permament PTF C.A Temporary PTF D.An Immediate PTF Correct:D 2.Which of the following lists potential job status values when using the WRKUSRJOB command? A.JOBQ, ACTIVE, OUTQ B.JOBQ, SUBSYSTEM, ACTIVETOINELIGIBLE C.JOB INITIALIZATION, PRESTART, AUTOSTART D.WAITTOACTIVE, ACTIVE, ACTIVETOINELIGIBLE Correct:A 3.A system has the following backup strategy implemented: A full system backup, including data queue and output queue entries, is run weekly. A daily backup is run on the remaining days of the week using SAVCHGOBJ to capture all changed objects. Which of the following objects will be omitted from the daily save? A.Spooled files added since the full backup. B.Data queues created since the full backup. C.Output queues created since the full backup. D.Data queue entries added since the full backup. Correct:A 4.Users are complaining that their PCbased application, which connects to the System i using JDBC, has gotten progressively slower when initially connecting to the System i. The number of users for this application has been increasing recently. The PC and Network support departments report no problems. How can the time required for the users' JDBC jobs to start be decreased? A.Change the duplex setting on the line description from *HALF to *FULL. B.Move the QZOSIGNON prestart jobs from the QUSRWRK subsystem to the QCMN subsystem. C.Increase the amount of memory and the maximum number of active jobs for the QSYSWRK subsystem. D.Increase the "Initial number of jobs" and the "Additional number of jobs" for the QZDASOINIT prestart job. Correct:D 5.Database operations are slower on Monday mornings and speed up throughout the week. The system is IPLed every Sunday evening. Which of the following is the most likely explanation for this behavior? A.The system's IPL attribute CHKJOBTBL is set to *ALL. B.The system is performing periodic data integrity checks after each IPL. C.The system builds temporary indexes during first access of files after each IPL. D.The files being accessed must be converted to the system's defined CCSID after each IPL. Correct:C 6.An administrator has accidentally disabled the QSECOFR service profile for SST. What is required to reenable the service profile? A.Reinstall the base SLIC (microcode) from tape. B.Sign onto the system as QSECOFR and use the CHGDSTPWD command with *ENABLE.

http://www.killtest.com/

http://www.killtest.net/

http://www.killtest.cn/


C.Sign into SST with the 11111111 profile. Reenable the QSECOFR service profile. D.Force DST from the control panel. Sign into DST as QSECOFR and reenable the profile. Correct:D 7.The job tables must be compressed at the next IPL. Which of the following will accomplish this? A.CHGIPLA CPRJOBTBL(*IPL) B.CHGIPLA CPRJOBTBL(*NEXT) C.PWRDWNSYS CPRJOBTBL(*ALL) D.PWRDWNSYS CPRJOBTBL(*NEXT) Correct:B 8.An administrator has set up the backup strategy as follows: Each weekend a SAVSYS and SAVLIB *NONSYS are performed. Each night during the week the command SAVCHGOBJ OBJ(*ALL) LIB(*ALLUSR) DEV(TAP01) REFDATE(*SAVLIB) is run. If on Wednesday a new library is created but not saved, what will happen on that night's SAVCHGOBJ for the new library? A.The library and the objects will be saved. B.The library and the objects will be skipped. C.Only the objects in the library will be saved and not the library. D.Only the Library will be saved, unless OBJTYPE(*OBJ) is added to the command. Correct:C 9.A system has high database disk activity and low CPU utilization. Which of the following is the least disruptive approach to improving the overall system performance? A.Activate Expert Cache. B.Run RCLSTG SELECT(*DBXREF). C.Set System value QPFRADJ to 2. D.Install additional disk drives. Correct:A 10.An i5/OS system has two fibre channel adapters connected to two tape drives in a 3584 tape library. Work with Media Library Media shows the same tape volumes in each of two tape libraries. A backup fails indicating no expired media is available. Which of the following is the most likely cause of the problem? A.The media is in category *SHARE400. B.The media is assigned to the wrong library name. C.The media library name used in the backup is not varied on. D.The logical tape library has not been assigned to both tape drives. Correct:B 11.An Administrator wants to change the configuration of the telnet server using System i Navigator. After expanding My Connections > Server, which of the following procedures accomplish this? A.Network > Servers > TCP/IP. Rightclick the TELNET server and select Properties from the drop down window. B.Remote Access Services > Servers. Rightclick the TELNET server and select Properties from the drop down window. C.Configuration and Service > Servers. Rightclick the TELNET server and select Properties from the drop down window.





D.Network > TCP/IP Configuration > Servers. Rightclick the TELNET server and select Properties from the drop down window. Correct:A 12.A 550 with two active processors has two partitions. Each partition has one capped, shared processor with one virtual processor. The first partition runs Domino and Apache while the second runs Websphere and PHP. Performance in both partitions is not what was expected. Which of the following configuration changes will improve performance? A.Change the processors to be uncapped. B.Change the processors to be dedicated. C.Change the memory allocation to *Dynamic. D.Increase the virtual processors for each partition. Correct:B 13.Internal audit is planning a security audit next month. The system administrator has been given the task to prepare the system for the audit. Which of the following commands is used to set security features to the IBM recommended values? A.SETSYSSEC B.CFGSYSSEC C.WRKSYSAUD D.STRSYSSEC Correct:B 14.The system attention light is illuminated on the front panel of a nonpartitioned system but the system is still operating. Where should the administrator go to find the source of the problem and turn the attention light off? A.Use WRKHDWRSC *ERROR B.Use DSPMSG QSYSOPR and use F16 C.Use the Hardware Service Manager in SST. D.Use WRKPRB and use F16, Report Prepared Problems Correct:C 15.An administrator has created a hosted Linux partition on their System i. There are no available physical Ethernet adapters to dedicate to the Linux partition. Which of the following actions will establish an Ethernet connection without purchasing a NIC? A.Place an existing NIC on a switched bus and uncap the resource. B.Use virtual Ethernet and the "Packet Rules" function in System i Navigator. C.Attach a bridge to an existing NIC and assign a port to the Linux partition. D.Implement IPv6 to allow for multihost communication on a nonshared resource. Correct:B 16.A System i customer is running DNS on their i5. What must be included in the backup to ensure the DNS tables are saved? A.Files QATOC* in library QUSRSYS B.IFS Directory /QIBM/UserData/OS400/DNS C.File QDNS[name_of_dns_server] in library QUSRSYS D.IFS Directory /QIBM/UserData/[name_of_dns_server] Correct:B





17.A customer has a System i model 520, serial number 6547BFD. It is one of several systems managed by an HMC running Version 7 firmware at TCP/IP address 10.0.0.100. Which of the following describes how to produce a system plan for this system in file MYPLAN.sysplan? A.Select system plans from left panel, then select Create System Plan. In the popup window, fill in system plan name and description, click OK. B.Select "Service Applications" on the HMC and click the Create System Plan option. In the popup window, click the line with 9406520*6547BFD, and specify file MYPLAN in the file name prompt. C.Launch SPT and click "Create New Plan." On the next panel, click the "Open an Existing System Plan." In the file prompt, specify https://10.0.0.100/sysplan. After the system plan is loaded from the HMC, save to file MYPLAN. D.Select "System Plans" on the HMC, and then click the "Import button. On the popup window, click the line with 9406520*6547BFD. When the import completes, click the "Export? button and specify file MYPLAN in the file name prompt. Correct:A 18.The administrator needs to configure the system to send messages when % System ASP Used reaches 90%. Which of the following will accomplish the task? A.Set QSTGLOWLMT to 10% and QSTGLOWACN to *MSG. B.Set QASPMAXLMT to 90% and the QASPMAXACN to *SNDMSG. C.Set QSTGMAXLMT to 90% and register the QIBM_QWC_QSTGMAXACN exit program to *SNDMSG. D.Set QSTGMINLMT to 10% and register the QIBM_QWC_QSTGLMINACN exit program to *SNDMSG. Correct:A 19.Which of the following will ensure that parent/foreign key relationships are maintained? A.Primary key constraint B.Database index C.Commitment control D.Referential constraint Correct:D 20.A customer has a single partition i525. The system administrator has been asked to implement WebSphere Application Server Express in order to implement additional functionality of an installed ERP package. Which of the following must be done to ensure proper performance of the WAS server? A.Verify the Query Optimization (QQRYDEGREE) is set to *OPTIMIZE. B.Review the shared pool memory allocation with an emphasis on the *BASE pool. C.Verify the system value QMLTTHDACN is set to option 3, "Do not perform the function." D.Review the shared pool paging sizes to optimize them for WebSphere Application Server Express. Correct:B 21.A developer is analyzing new SQL code for efficiency and receives a SQL0551 'user not authorized to system object QQQOOOPLNC *PGM'. What must be done to correct this? A.GRTOBJAUT for library QSYS adding the user's group. B.EDTOBJAUT for library QSYS adding the user's group. C.EDTOBJAUT on the objects in library QSYS adding the user. D.GRTOBJAUT adding user to the system authority list QSQLAUT. Correct:C





22.An administrator is recovering a system using the RSTLIB LIB(*NONSYS) command and receives an error that not all objects in library PRODDB were restored. Which of the following is the reason for this error? A.User profiles were not restored prior to the RSTLIB (*NONSYS). B.Some of the physical files in PRODDB had logical files from another library. C.Some of the logical files in PRODDB were based on physical files in PRODMOD. D.The journal receivers were in a different library and ASP than the objects in PRODDB. Correct:C 23.Which TCP/IP port establishes a connection to an HMC that will be used as the system console for a partitioned System i? A.22 B.23 C.2200 D.2300 Correct:D 24.An administrator has just performed a Dmode manual IPL from distribution media and has chosen the option to "Install Licensed Internal Code and Initialize System." Once the system completes its Aside IPL, what will the DST QSECOFR password be? A.abc123 B.QSECOFR C.qsecofr D.22222222 Correct:B 25.According to security policy, a user must have specific authority to run an application. Which of the following is the first step necessary to set the user authority? A.Change the user profile's limit capablities to *NO. B.Grant the user *ALLOBJ authority to the application library. C.Add the user to a group that has authority to the application library. D.Grant the user *CHANGE authority to all of the programs in the application library. Correct:C 26.Disk utilization on a system is climbing rapidly. Which of the following commands would help determine which job is responsible? A.WRKDSKACT SEQ(*IO) B.WRKDSKSTS OPT(*JOB) C.WRKACTJOB SEQ(*AUXIO) D.DSPSYSSTS SELECT(*DSK) Correct:C 27.A system administrator must add 100 users to an i5 system without impacting response times. Which of the following would be the first step in determining the current performance of the system? A.Define a performance collection agent in iDoctor for System i. B.Define a performance collection object within System i Navigator. C.Use Performance Explorer to collect generalized performance data.





D.Use the Workload Estimator to show existing performance constraints. Correct:B 28.An administrator has downloaded the latest HIPER PTF group and must distribute them to all partitions on a single system. Which is the most efficient method to accomplish this task? A.Copy the PTFs to tape and restore it on all partitions. B.Create an image catalog and distribute it to all partitions. C.Copy each of the PTFs to DVD. Distribute the media to all partitions. D.Create a save file for each PTF, then distribute the save files to all partitions. Correct:B 29.An administrator wants to change the name of the system from AS400 to SYSTEMI. Which of the following will change the name as it is reflected in the upperright hand corner of the default signon displays? A.CHGNETA SYSNAME(SYSTEMI) OPTION(*IMMED) B.CHGSYSVAL SYSVAL(QSYSNAME) VALUE(SYSTEMI) C.CHGNETA SYSNAME(SYSTEMI), and IPL the system D.CFGTCPDMN HOSTNAME(SYSTEMI), and IPL the system Correct:C 30.Each user on a system owns many thousand IFS objects. These objects are in directory structures that make using WRKOBJOWN difficult and timeconsuming. What commands can be used to generate reports regarding object ownership in the IFS? A.RTVDIRINF / PRTDIRINF B.RTVOBJOWN / PRTOBJOWN C.RTVOBJIFS / PRTOBJIFS D.RTVDIRIFS / PRTDIRIFS Correct:A 31.An administrator wants to control which functions a user can access when using System i Access on a system called Mysystem. Which of the following is the correct procedure to accomplish this? A.Install only the applications that are needed when installing iSeries Access on the user's computer. B.In System i Navigator: Expand Mysystem > Users and Groups > All Users then rightclick the user and select properties. Click on Capabilities and select the Applications tab. Disable the applications that aren't needed for the user. C.In System i Navigator: Expand Management Central > System Groups > Mysystem > Users and Groups. Rightclick the user and select properties. Click on Capabilities and select the Applications tab. Disable the applications that aren't needed for the user. D.In System i Navigator while logged in as a user with Security Administration rights: Expand Mysystem > Configuration and Service > Applications > Users. Rightclick the user and click on Capabilities. Disable the applications that aren't needed on this PC. Correct:B 32.The DUPTAP command failed to duplicate a virtual tape to a physical tape. Which of the following is the most likely cause of the failure? A.The number of virtual volumes is incorrect. B.The size of the virtual volume is incorrect.





C.The tape density setting of the virtual tape is incorrect. D.The data compression setting of the virtual tape is incorrect. Correct:C 33.A new printer has been configured but the writer ends while printing the first spooled file. The printer is configured with the network name ACCOUNTING1. Attempts to ping ACCOUNTING1 fail, but pings to ACCOUNTING1.mycompany.com succeed. What is the most likely solution to this problem? A.Add a route to the printer with ADDTCPRTE. B.Change the host search priority to *REMOTE in CHGTCPDMN. C.Correct the DNS entry to not include the mycompany.com domain. D.Correct the TCP domain search list in CHGTCPDMN to include mycompany.com. Correct:D 34.What special authority is needed to create or change a line description? A.*HDWRSC B.*SERVICE C.*ALLOBJ D.*IOSYSCFG Correct:D 35.A user has configured a new PC5250 session and has checked the "Bypass signon" box, but receives a sign on display every time the session is launched. Which of the following is the most likely reason this is happening? A.The PC does not have the SSL component of System i Access installed. B.The user's logon and password for Windows is not the same as their i5/OS user ID and password. C.The user does not have *CHANGE authority to the 5250 device description. D.The remote signon control (QRMTSIGN) system value is set to *FRCSIGNON. Correct:D 36.Which of the following describes an alternative way to identify an IP interface when using the STRTCPIFC command? A.Assign an Alias Name for the IP Interface. B.Add a host table entry for the IP Address. C.Add a network table entry for the IP Address. D.Assign a configuration profile to the IP interface. Correct:A 37.A system's QSECOFR profile has been disabled. How can QSECOFR be enabled without an IPL? A.Sign on at the system console with QSECOFR. B.Set the system panel to the "Secure" position. C.Use ASMI to reset the Managed Server's QSECOFR profile. D.Set the system panel to the "Manual" position, then enter code 20. Correct:A 38.An administrator wants to delete a problem after it has been CLOSED. The system won't allow this. Which system value controls this? A.QPRBHLDSTS B.QPRBRLSITV





C.QSYSPRBHLD D.QPRBHLDITV Correct:D 39.A System i job is attempting to connect to remote system ftp.mycompany.com, but the connection fails. Attempts to PING the FTP server by it's name also fail with the message 'Host name cannot be resolved.' Which of the following is the most likely cause of the failure? A.The i5 is not directly connected to the Internet. B.There is no DNS server configured for i5/OS to use. C.There is no route to the FTP server configured in i5/OS. D.There is no NAT entry in the network firewall for the System i IP address. Correct:B 40.Which of the following determines the memory pool in which a job will run? A.Class B.User Profile C.Routing Entry D.Job Description Correct:C 41.The administrator must prevent programmers from submitting compiles to the interactive subsystem. Which of the following will accomplish this task? A.Change the maximum number of batch jobs for the interactive subsystem to *NONE. B.Change the interactive subsystem's default routing entry's ALWBCH parameter to *NO. C.Change the class associated with the interactive subsystem to only allow interactive jobs. D.Replace the interactive subsystem's default routing program with one that ends immediately when a batch job is detected. Correct:D 42.A customer is having problems with the FTP server in i5/OS. Files FTPed into the system often end up in the QGPL library rather than in the IFS. What must be done so that the default location for uploaded files is in the IFS? A.Change the port on the FTP server. B.Change the FTP attributes for NAMEFMT to *PATH. C.Change the inbound FTP user's home directory to an IFS folder. D.Create an exit program that issues the NAMEFMT 1 command and assign it to the FTP Server Logon exit point QIBM_QTMF_SVR_LOGON. Correct:B 43.The administrator must backup the HMC configuration. Which of the following is the correct option to save all HMC data? A.Save Upgrade Data B.Save Profile Data C.Save LIC Configuration D.Save Critical Console Data Correct:D 44.Which of the following tasks must be completed to use a new Ethernet adapter with TCP/IP? A.Add a TCP/IP interface for the line description.





B.Add an IP address and route in the line description. C.Add a TCP/IP interface for the associated device description. D.Add the IP address for the Ethernet adapter to the host table. Correct:A 45.An administrator has an i5 with V5R4. The administrator has connected a 100Mb and a 1Gb line to the system and has configured the TCP/IP addresses 10.1.1.10 and 10.1.1.11 respectively on the two lines. After creating a Virtual IP Address (VIPA) 10.1.1.12 what must be done to so that traffic will flow over the gigabit Ethernet interface unless it has failed? A.Specify the 10.1.1.11 interface in the LCLIFC parameter on the CHGTCPIFC command. B.In System i Navigator select the 10.1.1.11 interface as the preferred interface for the VIPA. C.Specify a higher priority in the DUPRTEPTY parameter of the CHGTCPRTE command for the Schowler route for the 10.1.1.11 interface. D.Set the 10.1.1.10 interface to AUTOSTART(*NO) with the CHGTCPIFC command. Bring that interface up only when the 10.1.1.11 interface has failed. Correct:B 46.An administrator has noticed that several logical files in a production library reference physical file PHYFIL0001 instead of PHYFIL. Which of the following is the most likely cause? A.The logical files were recompiled with VERSION(*GEN). B.The file was created while the QDBSRV job was still running. C.The physical file was restored from an older save with ALWOBJDIF(*all). D.The physical file was damaged and a RCLSTG was run to recover the file. Correct:C 47.What must be done to make a printer using a remote output queue select forms from a different tray? A.Use the WRKOUTQD command to set the desired tray. B.Create a printer customization object to override the printer tray. C.Create a workstation customization object and configure the output queue to use it. D.Change the parameter for "destination type" in the remote output queue configuration. Correct:C 48.Which of these mirroring levels provides the highest level of protection? A.Bus B.Ring C.Tower D.Adapter Correct:B 49.A customer with a 10GB file FILEA in library LIBC, containing almost 50% deleted records wants to reclaim the deleted space in the file. The file is currently journaled and always open for read by the users. Which other following parameters of the RGZPFM command would allow the administrator to reclaim the deleted space? A.RGZWHLACT(*YES) LOCK(*SHRRD) B.ALWCANCEL(*YES) LOCK(*SHRRD) C.RGZWHLACT(*YES) LOCK(*EXCLRD) D.ALWCANCEL(*YES) LOCK(*EXCLRD)





Correct:D 50.An installation is using DDM via TCP/IP. User authentication is required by the target system. Which of the following correctly describes the steps required in System i Navigator to enable a user profile on the source system to access files on the target system? A.Right click on Local User Profile, copy, then paste into All Users on the remote system. B.Right click the Source system, select Application Administration, then add the user profile to the DDM Client in the Host Applications tab. C.Right click the target system, select Application Administration, then add the user profile name from the source sytem to the DDM Server in the Host Applications tab. D.Select the source system > Users and Groups > All Users, then select and open the user profile. Click the Network button, then add an entry for the target server name, specifying an active target system user profile name and password. Correct:D 51.Which is the correct command to create an image catalog and directory named SF99540 in the /ptfimages directory? A.CRTIMGCLG TYPE(*PTF) DIR('/ptfimages/SF99540') B.CRTIMGCLG IMGCLG(SF99540) DIR('/ptfimages') TYPE(*OPT) C.CRTCLG TYPE(*IMGCLG) DIR('/ptfimages/SF99540') CRTDIR(*YES) D.CRTIMGCLG IMGCLG(SF99540) DIR('/ptfimages/SF99540') CRTDIR(*YES) Correct:D 52.Assuming an FSP is HMCmanaged for firmware, what is the proper order to upgrade code levels? A.FSP > HMC > i5/OS B.HMC > FSP > i5/OS C.i5/OS > FSP > HMC D.FSP > i5/OS > HMC Correct:B 53.Which of the following is omitted in the save performed by the Save System Information (SAVSYSINF) command? A.Job descriptions B.System Reply Lists C.Configuraton objects D.Subsystem descriptions Correct:C 54.An administrator needs to create a custom install image of iSeries Access for developers with the system management modules removed. Which of the following methods will accomplish this task? A.Start System i Access, and select "Create Custom Image" from the tools menu. B.On the System i Access CD, navigate to the \Express\Install\Image directory and run the program CWBINIMG.BAT. C.From a PC with System i Access installed, use selective setup to remove the modules that should not be available to developers, then copy the C:\Program Files\IBM\Client Access directory to a network drive. D.Copy the contents of the \Express\Install\Image directory on the System i Access CD to a network drive,





then edit the SETUP.INI file and remove the entries for the modules that should not be available to developers. Correct:B 55.The system has been in a restricted state when a job was scheduled to run. When the system is returned to normal operating state, which of the following job scheduler "Recovery Action" settings will allow the job to submit but not process? A.*NOSBM B.*SBMRLS C.*SBMHLD D.*MANUAL Correct:C 56.An administrator is getting complaints that each time a LANattached high speed laser printer is used after a long idle period it takes several minutes to reach full speed. PCattached printers don't exhibit this behavior. What can be done to make the speed of the laser printer more consistent and faster? A.Increase the run priority of the writer job for the laser printer. B.Change the user driver program for the laser printer to *IBMSNMPDRV. C.Increase the minimum percentage size of the *SPOOL pool using WRKSHRPOOL. D.Change the host print transform parameter of the device description to *NO. Correct:C 57.A new feature in i5/OS V5R4 is the native ability to restore spooled files. Which of the following commands is used to perform this function? A.RSTSPLF B.RSTOUTQ C.RSTOBJ with the OBJTYP(*SPLF) parameter D.RSTLIB with the SPLFDTA(*NEW) parameter Correct:D 58.The telnet server has been configured to use SSL. A certificate was assigned by the system administrator, however users with emulators other than System i Access can connect to the telnet server using SSL without a certificate. What must be done to require the clients to have a valid certificate? A.The Telnet port (23) must be closed in the firewall. B.The telnet server ALWSSL parameter must be set to *ONLY. C.The Digital certificate must be recreated as a public private key pair. D.The telnet server "Client authentication required" parameter must be set to "Yes." Correct:D 59.A software vendor has suggested a limit of 20% average busy on all disk arms to avoid performancerelated problems with the software. Which of the following will allow the administrator to monitor the disk performance and send out an alert when the performance recommendation is exceeded? A.Create a system monitor in Management Central measuring disk arm utilization and set a threshold trigger to fire. B.In System i Navigator, create a monitor job in Collection Services measuring disk arm utilization and set





a threshold trigger to fire. C.Use Management Central Collection Services and set an I/O subsystem monitor. Include all disk units in the monitor and set the alarm at 20%. D.In System i Navigator, Configuration and Services > Hardware > Disk units, set a monitor job up for the disk units and create a trigger to fire at 20% utilization. Correct:A 60.When looking at a WRKSYSSTS screen, an administrator notices disk usage is increasing quickly and displays the following: Current unprotect used . : 54715 M Maximum unprotect . . . : 54715 M When taking an F10 to refresh, the values continue to increase. What is the most likely cause of this behavior? A.Reclaim storage in progress B.Reorganization of a large physical file C.Runaway or poorlywritten database query D.Savewhileactive checkpointing in progress Correct:C 61.A customer is testing their disaster recovery policy at a remote location. Equivalent computing and tape hardware are in place, and the system has restored without error. IP is started and all subsystems and servers are active. However, the users are unable to access the machine. Which of the following will correct the problem? A.The RSTAUT command must be run. B.The direction of remote journaling must be reversed. C.INZSYS must complete before users can access the system. D.Users must flush ARP cache on their individual workstations. Correct:D 62.Due to application service level agreements, an installation would like to use Save While Active for backing up the application's files. The saves have been failing due to commitment control locks. What can be done to accomplish the saves? A.Use CHGJOB *NOCMT during the save period. B.Extend the Save Active Wait time to *NOMAX. C.End Commitment Control for the application during the save period. D.Use *NOCMTBDY for the Save Active Wait time (SAVACTWAIT) parameter. Correct:D 63.In preparation for system maintenance, an administrator wants to ensure that the next IPL brings the system up in a restricted state. Which of the following will accomplish this? A.CHGIPLA STRRSTD(*YES) B.PWRDWNSYS STRRSTD(*YES) C.CHGIPLA RESTART(*STRRSTD) D.PWRDWNSYS RESTART(*STRRSTD) Correct:A 64.PTFs have been downloaded using the SNDPTFORD command. Where are these PTFs stored before they are installed? A.In save files named Q followed by the PTF identifier in library QGPL. B.As multiple objects in libraries named Q followed by the PTF identifier.





C.In save files named with the Licensed Program Product in library QUSRSYS. D.In bin files named with the PTF number in directory /QIBM/UserData/OS400/Service. Correct:A 65.If the system is currently at firmware level SF235_160, which of the following versions of firmware would be a disruptive upgrade? A.SF240_320_201 B.SF235_180_160 C.SF235_185_160 D.SF235_214_160 Correct:A 66.Prior to upgrading to V5R4, the administrator must insure that the Console type is correctly set on their 520. How would this be accomplished? A.Using the HMC, Set Console Type in current Profile. B.Set the System Value QCONSOLE to the desired value. C.Work with service tools user IDs and Devices inside of Service Tools. D.Using System i Navigator, expand the system and select Console Options. Correct:C 67.Which parameter of the TFRJOB command will move a job from one subsystem to another? A.JOBQ B.SBSD C.JOBD D.RTGDTA Correct:A 68.An administrator has configured the gigabit Ethernet interfaces to use Jumbo Frames to improve performance of large file transfers with FTP and NFS. By measuring throughput the administrator determined that no change in transfer speeds has occurred. Which of the following explains why no additional throughput was gained? A.NFS and FTP do not support Jumbo Frames. B.Jumbo Frames have not been enabled in the TCP/IP Attributes. C.The system has not been IPLed since Jumbo Frames have been enabled. D.The path between the source and target servers does not support Jumbo Frames from end to end. Correct:D 69.Which of the following i5/OS commands is used to determine the currently installed cumulative PTF package level? A.WRKPTFGRP B.WRKPTFCUME C.DSPSFWRSC *PTF D.DSPSYSVAL QPTFLVL Correct:A 70.An administrator has a DVD from a central site administrator with ISO images. DVD file /C7123540.ISO must be placed into an existing image catalog "PTFS". Which of the following commands performs this task? A.CPY





B.DUPOPT C.LODIMGCLG D.ADDIMGCLGE Correct:D 71.Which of the following commands will save user profiles, authorization lists and authority holders? A.SAVUSRPRF B.SAVSECDTA C.SAVPRFCFG D.SAVUSRDTA Correct:B 72.From which of the following can an IP interface be added? A.WRKTCPIFC B.ADDIFC *IP C.NETSTAT *IFC D.CFGTCP, option 1 Correct:D 73.Prior to upgrading to V5R4, the administrator must insure that the Console type is correctly set on their 520. How would this be accomplished? A.Using the HMC, Set Console Type in current Profile. B.Set the System Value QCONSOLE to the desired value. C.Work with service tools user IDs and Devices inside of Service Tools. D.Using System i Navigator, expand the system and select Console Options. Correct:C 74.An administrator is using Management Central to monitor system performance and send notifications when performance events occur. At various times the connections between the central and remote systems fail. Which of the following actions will notify the administrator when connections fail? A.Make the monitor job a prestart job so that when it fails the subsystem will restart it immediately. B.Add an exit point program to the TCP/IP server request validation exit program to monitor for connection failures. C.Establish a job monitor for management central that emails a notice to the administrators cell phone when the connections fail. D.Establish a TCP/IP port monitor for each remote system that emails a notice to the administrators cell phone when the connections fail. Correct:C 75.An Ethernet line and a PPP line are having intermittent failures. Messages are hard to find in the QSYSOPR message queue. What should be done so that the messages can be easily located? A.Create the CMNMSGQ message queue in library QGPL and change the system value QCMNMSGQ to point to this queue. B.Create the QSYSMSG message queue in library QSYS and change the network attribute CMNMSGQ to point to this queue. C.Create the QSYSMSG message queue in library QSYS. All Communications errors will automically be





directed to that queue. D.Create the CMNMSGQ message queue in library QGPL and change the MSGQ parameter on the line descriptions to point to this queue. Correct:D 76.Which system value must be set to '1' before the Universal Connection Wizard is functional? A.QAUTOVRT B.QAUTORMT C.QAUTOCFG D.QRETSVRSEC Correct:D 77.A System i has a fibre attached IBM TS3500 (3584). Management has instituted a policy that any tape leaving the data center with application data must be encrypted. Which of the following tape library encryption modes is configured for i5/OS at V5R4? A.Library Managed B.Application Managed C.System Managed, inband D.System Managed, outofband Correct:A 78.What are the two IBMprovided paging options for memory pools? A.*FIXED, *CALC B.*FIXED, *AUTO C.*MANUAL, *AUTO D.*CALC, *SYSVAL Correct:A 79.During a system recovery at V5R4 it is noticed that after restoring the user libraries, a number of files that were previously journaled are no longer journaled. Which of the following is the probable cause? A.System value QSYSJRN was not set to *YES. B.The journal that the files were journaled to was restored after the files. C.The Apply Journaled Changes command needs to be run to restart journaling. D.Journaling is not restarted after a system restore until the Journal recovery step of an IPL is completed. Correct:B 80.An administrator is signed on to SysA and is trying to access SysB's IFS through QFileSvr.400. The administrator is able to telnet between systems but when the WRKLNK '/QFileSvr.400/SysB' command is used an 'object not found' error is received for the directory. What must be done to correct the problem? A.Start the QFileSvr.400 server on SysB. B.Add a host table entry on SysA with the name SysB and its IP address. C.Correct the administrator's User ID and password on SysB to be the same as it is on SysA. D.Use the CHGDIR command to change the directory to QFileSvr.400 and then use the MKDIR command to create the directory SysB. Correct:D 81.In WRKJOBSCDE, what is the result of using the *NOSBM recovery action?





A.The job will never be submitted. B.If an error occurs when submitting the job, the job will not be resubmitted until this parameter is reset. C.If the job scheduler is not running when the submit date/time occurs, the job will not be submitted when the job scheduler starts again. D.If the system is in restricted state when the submit date/time occurs, the job is not submitted but the Recovery Action is set to *HOLD. Correct:C 82.An i5/OS partition slowed significantly overnight. Verifying processor and memory allocations on the HMC shows nothing has changed. WRKACTJOB and WRKSYSSTS show nothing unusual and CPU usage is lower than normal. However, interactive response and especially batch run times are dramatically worse than normal. Which of the following should be consulted next? A.WRKMODD B.WRKDSKSTS C.WRKSBSJOB D.WRKSHRPOOL Correct:B 83.Where are the default query optimizer options stored? A.QGPL/SQLINI B.QSYS/QQQUERY C.QUSRSYS/QAQQINI D.'/QIBM/UserData/SQL/SQLOPTS.ini' Correct:C 84.When a job enters a subsystem, which of the following determines which initial program will run? A.Class B.Job queue C.User profile D.Routing entry Correct:D 85.The administrator has completed installing a cumulative PTF package and now wants to delete the catalog SF99540 and all associated images, including dependent images. Which of the following commands will accomplish this? A.RMVIMGCLGE IMGCLG(SF99540) DLTDEPIMG(*YES) B.RMVCLG IMGCLG(SF99540) KEEP(*NO) DLTDEPIMG(*YES) C.DLTIMGCLG IMGCLG(SF99540) KEEP(*NO) DEPIMGCLG(*DELETE) D.DLTCLG TYPE(*IMGCLG) IMGCLG(SF99540) DEPIMGCLG(*DELETE) Correct:C 86.Given the following job queue entry display: Display Job Queue Entries System: MYSYSTEM Subsystem description: QBATCH Status: ACTIVE Seq Job Max Max by Priority Nbr Queue Library Active 1 2 3 4 5 6 7 8 9 10 QBATCH QGPL 2 * * * * * * * * * 20 QS36EVOKE QGPL *NOMAX * * * * * * * * * 50 QTXTSRCH QGPL *NOMAX * * * * * * * * * The QBATCH Subsystem allows a maximum of only 2 active jobs. The Administrator would like to attach a new Job Queue called NEWJOBQ to the subsystem that would insure that when a job is placed into this Job Queue, the





job will be the next to run. Which of the following commands will accomplish this? A.ADDJOBQE SBSD(QBATCH) JOBQ(NEWJOBQ) MAXACT(1) SEQNBR(10) MAXPTY1(2) B.ADDJOBQE SBSD(QBATCH) JOBQ(NEWJOBQ) MAXACT(2) SEQNBR(2) MAXPTY1(*ALL) C.ADDJOBQE SBSD(QBATCH) JOBQ(NEWJOBQ) MAXACT(1) SEQNBR(2) MAXPTY1(*ALL) D.ADDJOBQE SBSD(QBATCH) JOBQ(NEWJOBQ) MAXACT(2) SEQNBR(1) MAXPTY1(*NOMAX) Correct:D 87.When using either the Backup menu or System i Navigator, which of the following can be saved with a backup list? A.User libraries, IBM product libraries, folders, and directories B.IBM libraries, Operating system, security objects, and configuration objects C.User libraries, directories, folders, security objects, and configuration objects D.User libraries, IBM product libraries, Operating system, directories, and configuration objects Correct:C 88.An administrator must check the current levels of the Group PTF's using System i Navigator. After expanding "My Connections," the system, and "Configuration and Service," what are the correct steps to accomplish this task? A.Expand "Fixes Inventory", Click on "Fix Groups". B.Expand "Software", Expand "All Fixes" and select "Groups". C.Expand "Software", Expand "Fixes Inventory" and select "Group Fixes". D.Expand "Fixes Inventory", Expand "All Fixes" and select "Fix Groups". Correct:A 89.An administrator has been directed to establish redundancy for their network links used for TCP/IP traffic. They have connected three Gigabit Ethernet lines to three different network switches. Which of the following is required to meet their goal? A.Enable IP datagram forwarding. B.Set the system value QNETR to *ETHERNET. C.Set the REDUNDANT(*YES) parameter on each of the Ethernet lines. D.Create indirect routes to the local network for each of the three Ethernet lines. Correct:D 90.A new System i with V5R4 is being installed. The Ethernet line description has been configured and is varied on and active. IP has been configured and an address assigned. When the interface is activated, it intermittently fails. Which of the following is the most likely cause of the failure? A.The line is assigned to the wrong resource. B.IP version 6 has not been installed on the system. C.The administrator does not have *IOSYSCFG special authority. D.The IP address is in use by some other device on the network. Correct:D 91.Which of the following will own a stream file that is created in the ROOT file system? A.The QDFTOWN profile B.The user that created the file C.The owner of the folder where the file is created D.The user identified in the GRPPRF parameter of the user profile that creates the file Correct:B





92.Two i5 servers are configured to move spooled files between them with remote output queues. Spooled files move from system B to system A but none from system A get to system B. The LPD server is running on both systems and the IP addresses are correct. What is the most likely problem? A.The QTMPLPD user profile on system B is disabled. B.The network attribute ALWLPD is not set to *YES. C.The output queue on system B is not assigned to a writer. D.The QTCP profile which the LPD job runs under does not have *SPLCTL special authority. Correct:A 93.The QSYSOPR message queue is indicating that one or more cache batteries will soon fail. Where should the administrator go to determine which battery requires replacement? A.GO HARDWARE, Storage Resources B.Hardware service manager in SST C.Use F16 with the DSPMSG QSYSOPR D.Use WRKDSKSTS and use F11 to check battery status Correct:B 94.A company's security policy states that any user profile inactive for 7 days must be disabled. Which of the following commands will accomplish this task? A.ANZUSRPRF DAYS(7) B.ANZPRFACT INACDAYS(7) C.CHGACTPRF INACDAYS(7) ACTION(*DISABLE) D.CHGEXPSCDE EXPDAYS(7) ACTION(*DISABLE) Correct:B 95.The administrator has recently changed the system value QPFRADJ to 3. Which of the following commands can set a minimum size on the interactive pool? A.CHGSBSD B.WRKSYSSTS C.WRKPFRADJ D.WRKSHRPOOL Correct:D 96.Which of the following commands is used specify when job tables will be compressed? A.CHGIPLA B.CMPJOBTBL C.CPRJOBTBL D.CHGJOBTBL Correct:A 97.An administrator FTPed a save file to their System i but the file ended up in the /home/admin directory in the IFS. Which of the following tasks will enable the library to be restored? A.Save the file to tape and restore it to library QGPL. B.Use the CPYSAVF command to copy the file from the IFS to QGPL. C.FTP to the system's Loopback address, using namefmt 1, to /qsys.lib/qgpl.lib. D.Write a CL program to read the records from the file in the IFS and then write them to the save file in QGPL.





Correct:C 98.Which of the following is the minimum release level of System i Access to support Microsoft Windows Vista Business? A.V5R4M5 B.V5R4M0 C.V5R3M0 D.V5R2M0 Correct:B 99.Which BRMS control group is used to backup the entire system? A.*FULL B.*SAV21 C.*SAVSYS D.*SYSTEM Correct:D 100.The administrator notices that every time a certain query is run that the system slows down, and when they perform a WRKACTJOB, they see IDXFILEA. Which of the following tools can determine what is happening? A.WRKQRYANZ B.WRKJOB, Option 14 C.System i Navigator > Index advisor D.Management Central > Monitors > System Correct:C 101.An i520 has three i5/OS partitions. The workload is heavier on one partition during first shift and on the other partitions during the other shifts. i5/OS is licensed to use all processors. Which of the following should be used to allow the system to dynamically shift processor resources to meet these varying demands over a 24 hour period? A.Set QFPRADJ system value in all partitons to "3". B.Set the Management Central workload scheduler to *DYN. C.Set the partition definitions virtual processor allocation to *CALC. D.Set the partition definitions to uncapped with equal weighting between partitions. Correct:D 102.An administrator wants to use an internal optical drive on their System i for a backup. Assuming the correct device is installed to allow writing to optical media, what is the supported media type for a save operation? A.CDRW B.DVDR C.DVDRW D.DVDRAM Correct:D 103.If the system is currently at firmware level SF235_185, which of the following versions of firmware update is a concurrent upgrade? A.SF240_320 B.SF235_160





C.SF235_180 D.SF235_214 Correct:D 104.The system administrator has run the ANZDFTPWD command to review all user profiles for default passwords. In addition to a printed report of the results, where else is the resulting data stored? A.In the system log (QHST) B.In file QASECPWD in library QUSRSYS C.In data area QPWDLVL in library QSYS D.In /QIBM/UserData/OS400/NetworkAuthentication Correct:B 105.A System i administrator is FTPing a 15GB file between i5 servers across a WAN link. The link is a T3 (45 Mbps) which goes across the country. Transfer speeds are less than 1/4 of the expected speeds. Neither i5 has CPU, disk or memory constraints and the network technicians report link utilization at only 12 Mbps. Which of the following is most likely to improve the transfer speeds? A.Increase the priority of the FTP Server job. B.Increase the time slice of the FTP Server job. C.Increase the size of the TCP Send and Receive Buffers. D.Increase the maximum frame size for the network interfaces used by TCP/IP. Correct:C 106.During an IPL the operator panel of an i5 520 has been displaying an SRC Code for 10 minutes. The attention light is not illuminated. What does this indicate? A.The system is performing normal processing. B.The system is stuck in a loop and must be reIPLed. C.IBM Service must be called and given the SRC from the panel. D.The SRC code must be found on the 'IPL Reference code finder' page at IBM and the action taken from the information found there. Correct:A 107.A new feature in i5/OS V5R4 is the native ability to save spooled files. Which of the following commands is used to perform this function? A.SAVSPLF B.SAVOUTQ C.SAVOBJ with the OBJTYP(*SPLF) parameter D.SAVLIB with the SPLFDTA(*ALL) parameter Correct:D 108.An administrator must quickly review the current settings of the securityrelated system values. Which of the following will accomplish the task? A.Use the PRTSYSVAL command and review the output. B.Use WRKSYSVAL SYSVAL(*SEC) OUTPUT(*PRINT) and review the output. C.Use the CFGSYSSEC command to review the securityrelated system values. D.Run the Security Tools System Audit command to review the securityrelated system values. Correct:B 109.A customer with a System i model 520 wants to change the console type from Twinax Console





to Operations Console. After the appropriate hardware has been attached, how is this accomplished using i5/OS? A.Make sure WRKSYSVAL QAUTOCFG is set to 1. B.Change the system value QCONSOLE to *OPCON. C.Call program QCHGCONTP (2) to change console type. D.From SST or DST, use User IDs and Devices to change the system device. Correct:D 110.An administrator wants program PAGEADMIN called when message queue APP1 receives message ID APP0123. Which of the following describes where the message monitoring is configured? A.CHGMSGQ B.CFGMSGMON C.In Management Central: "Monitors" > "Message" D.In System i Navigator: "Basic Operations" > "Messages" > "APP1" Correct:C 111.A software vendor has suggested a limit of 20% average busy on all disk arms to avoid performancerelated problems with the software. Which of the following will allow the administrator to monitor the disk performance and send out an alert when the performance recommendation is exceeded? A.Create a system monitor in Management Central measuring disk arm utilization and set a threshold trigger to fire. B.In System i Navigator, create a monitor job in Collection Services measuring disk arm utilization and set a threshold trigger to fire. C.Use Management Central Collection Services and set an I/O subsystem monitor. Include all disk units in the monitor and set the alarm at 20%. D.In System i Navigator, Configuration and Services > Hardware > Disk units, set a monitor job up for the disk units and create a trigger to fire at 20% utilization. Correct:A 112.An automaticallyscheduled job on the HMC moves memory from one partition to another on a daily basis. Most days the process works flawlessly, but on occasion, the memory move is not entirely successful. Which of the following is the most likely cause and solution? A.Source partition is busy. Increase wait time on memory move operation. B.Target partition cannot communicate via TCP to HMC. Confirm network functionality. C.Target partition is not ready for memory addition. Increase wait time on memory move operation. D.Source partition is not in restricted state. End all subsystems and retry memory move operation. Correct:A 113.A System i5 has two physical Ethernet networks attached. ETH1 connects to the customers data network and ETH2 connects to credit authorization vendor using the 192.168.200.0 network. An additional router is being added to the network for check guarantee functions using the 172.31.100.0 network. For data security the new router must not be connected to the company network. Which of the following is the least expensive way to connect this new router? A.Renumber the credit authorization network to match the check network. B.Install an additional Ethernet card and connect the new router to that network.





C.Add an address in the 172.31.100.0 network to ETH2 and connect the new router to that network. D.Connect a third router to the network ETH2. The router will have addresses for both the credit authorization and check processing networks. Then add a route in the check processing network with this router as the next hop. Correct:C 114.Which of the following describes how to authorize a new i5/OS administrator profile to use IBM Director Version 5.2 with i5/OS? A.Grant the i5/OS user profile *IOSYSCFG special authority. B.Add the user profile to IBM supplied authority list QIBMDIRADM with *USE authority. C.In the System i HTTP administration server, select the Directory Server (LDAP) and add the user profile name in the QIBMDIR/Administrator directory. D.In System i Navigator, right click the system, select Application Administration, then add the user profile to the IBM Director Administrators in the Host Applications tab. Correct:D 115.An administrator has installed four new disk drives in a FC #0595 expansion unit which currently contains six RAID protected drives. The customer has selected the option in SST to start device parity protection and now sees that there are two RAID sets in the FC #0595. The administrator wants a single RAID set in order to provide the maximum storage possible. Which of the following describe the necessary steps to configure a single RAID set? A.IPL the system to DST, then restart RAID on that controller and add the four new disks to the appropriate ASP. Finish the IPL. B.Run STRSST, identify the two RAID sets in the FC #0595, select the option merge the RAID sets, add the four new disks to the appropriate ASP, and exit from SST. C.IPL the system to DST, identify the two RAID sets in the FC #0595, stop RAID, then restart RAID and add the four new disks to the appropriate ASP. Finish the IPL. D.Run STRSST, stop RAID on the four new drives, start RAID on the controller to add the four drives to the current RAID set, and add the four new disks to the appropriate ASP. Correct:C 116.Which of the following commands is used to determine if any logical files are built over a physical file? A.DSPFD B.DSPLF C.DSPDBR D.DSPPFM Correct:C 117.An i5/OS partition is operating normally for most tasks. Performance reports show that interactive response times are acceptable and batch run times are normal. System status and disk status show normal paging and I/O rates for this system. However, users are complaining of intermittent response for interactive tasks, slow ODBC access and FTP transfers taking much longer than normal. Which of the following is a likely cause of this problem? A.The QSYSWRK subsystem has insufficient main storage so TCP/IP cannot run reliably. B.The Ethernet switch is configured for half duplex and the i5/OS Ethernet line is configured for full duplex. C.The TCP/IP Attribute ARP Cache Timeout has been set too low and the system must perform ARP





discovery too often. D.The DNS server is operating very slowly so requests for name resolution are adding significant latency to the connections. Correct:B 118.Which of the following specifies a job's run priority? A.Class B.Routing entry C.Job description D.Pool definition Correct:A 119.Which user profile must be enabled for the Management Central server to work correctly? A.QIBM B.QSRVAGT C.QSECOFR D.QSYSOPR Correct:C 120.WRKSYSSTS shows there are 28,500 jobs in the system. Which system value must be changed to make sure there are enough job table entries during IPL? A.QTOTJOB B.QACTJOB C.QINTJOB D.QSYSJOB Correct:A 121.An IFS directory (/fixes) filled with 42 virtual optical images has just been transferred from one system to another. This directory of images corresponds to an image catalog called FIXES. What object must be copied from the source system to avoid reentering the 42 images to a new image catalog? A.QSYS/FIXES *IMGCLG B.QUSRSYS/FIXES *IDX C.QUSRSYS/FIXES *IMGCLG D.QSYS.LIB/QUSRSYS.LIB/FIXES.SAVF Correct:C 122.A System i job is attempting to connect to remote system ftp.mycompany.com, but the connection fails. Attempts to PING the FTP server by its name also fail with the message 'Cannot find host.' Which of the following is the most likely cause of the failure? A.The host name search priority is set to *LOCAL. B.There is no route to the FTP server configured in i5/OS. C.The configured DNS Servers are not responding or cannot be reached. D.There is no NAT entry in the network firewall for the System i IP Address. Correct:C 123.An i5 system has three partitions, and a single fibre channel connected tape library containing a single drive. The two fibre I/O adapters are switchable. After moving one of the I/O adapters to a partition for backup, the vary on of the tape library fails with a message indicating the tape library





is not found. Which of the following is the most likely cause of the problem? A.The vary on omitted the RESET(*YES) parameter. B.Both I/O adapters are assigned to the same partition. C.The fibre channel path failed, diagnostics must be run to isolate the cause. D.There is a WorldWide addressing conflict with the fiber channel addresses configured for the I/O cards. Correct:B 124.An administrator is recovering a system at a disaster recovery site after a failure. The daily save uses the i5/OS Ragged Save While Active function. The backup reported incomplete transactions were found during the daily save operation, but the transactions ended before the journal receivers were saved. Which of the following will recover the changes from the incomplete transactions? A.Use the RSTLIB command to restore libraries that may have incomplete transactions specifying the SAVACTWAIT(*RAGGED) parameter. B.Use the CHGJRNOBJ with parameters ATR(*PTLTNS) PTLTNS(*ALWUSE) for file(s) in the libraries that may have incomplete transactions. C.After restoring the journal receivers, journals and files, use APYJRNCHG command with parameters FROMENT(*LASTSAVE)and TOENTLRG(*LAST) specified. D.After restoring the journal receivers, journals and files, use RMVJRNCHG command with parameters FROMENTLRG(*LASTSAVE) TOENTLRG(*COMMITSTART) specified. Correct:C 125.Which technology is designed to solve the problem of too many passwords to remember? A.Secure Sockets Layer (SSL) B.Enterprise Identity Mapping (EIM) C.Lightweight Directory Access Protocol (LDAP) D.Password Authentication Control Environment (PACE) Correct:B 126.User management has decided to track average and maximum interactive response times in a partition dedicated to order entry transactions. Management wants notification when response times reach a specific threshold. Which of the following methods will accomplish this task? A.Add a trigger to the QRSPTM file in QMPGDATA that sends an alert for specific conditions. B.Use the CRTPFRMON command to create a performance monitor with the interactive threshold limit set. C.Create a performance monitor in Management Central to monitor response times in the order entry partition. D.Use Performance Tools management feature to set an interactive response time threshold on the order entry partition and send a break message to the system operator. Correct:C 127.An i570 is operating with twelve active processors and four inactive processors. Anticipating the need for additional resources, the administrator decides to activate some of the inactive processors. Which of the following methods is used to activate additional processors? A.Use the HMC Service Focal Point wizard to activate the processors and enter the license codes. B.In SST, use the Work with system capacity option and activate the processors with the code provided by IBM.





C.Use the HMC Capacity on Demand wizard. The wizard will request the user to enter the IBM supplied code to activate the inactive processor(s). D.IPL the system into DST and activate the new processors. After the IPL completes, answer the break message in QSYSOPR with the code provided by IBM. Correct:C 128.Which of the following will produce a report that lists users with default passwords? A.ANZDFTPWD B.ANZPWDRPT C.PRTDFTPWD D.PRTPWDLVL Correct:A 129.Which of the following are saved using the Save System Information (SAVSYSINF) command? A.*CMD and *MSGF objects in QSYS changed since the last SAVSYS B.*AUTL and *PGM objects in QSYS changed since the last SAVSYS C.*USRPRF and *TBL objects in QSYS changed since the last SAVSYS D.*DTAARA and *FILE objects in QSYS changed since the last SAVSYS Correct:A 130.Disks must be removed the system ASP. Which of the following procedures will minimize system downtime and is the proper procedure for each of the disks which are to be removed from the system? A.STRASPBAL *MOVDTA then IPL to DST to complete the removal of the drives. B.STRASPBAL *RMVDSK then use SST concurrent maintenance to complete removal of the drives. C.STRASPBAL *ENDALC followed by STRASPBAL *MOVDTA. When the move is complete, IPL to DST to complete the removal of the drives. D.STRASPBAL *ENDALC followed by STRASPBAL *MOVDTA. When the move is complete use SST concurrent maintenance to complete removal of the drives. Correct:C 131.An i5 520 has its FSP Firmware update policy set to OS Managed. How should the administrator update the Firmware? A.By Applying MH type PTFs to the HMC. B.By running the UPDFSP from the console. C.By updating the OS in the primary partition. D.By applying regular Cumulative PTFs and Hipers. Correct:D 132.A restore process between two i5 systems fails at the target system following an i5/OS upgrade on the source system. The error received states that the file cannot be restored. What must be done to correct the problem? A.The file must be recreated on the source system before it can be sent to the target system. B.The command used to save the file must be changed to specify "TGTRLS(*PRV)" on the source system. C.The command used to restore the file must be changed to specify "TGTRLS(*ANY)" on the target system. D.A PTF must be applied to the target system to allow it to restore the file from a system at a newer release level.





Correct:B 133.Which of these mirroring levels provides the lowest level of protection? A.Bus B.Ring C.Tower D.Adapter Correct:D 134.An administrator has created an image catalog containing the latest fixes and HIPER PTF group. The plan is to insert the catalog and its entries into save files and distribute them to all partitions. While verifying the contents of the save files before distribution, it is found that the save file containing the image catalog entries is empty. Which of the following is the likely cause of this problem? A.The entries do not have the *ALWSAV parameter set to *YES. B.The save file used is not in the administrator's library list. C.The directory specified in the SAV command is not linked to the entries. D.The *TRGRLS parameter is set to a value other than the current OS release level. Correct:A 135.How should an administrator check to see that the correct PTFs are installed on the System i for a particular version of WDSc? A.Open WDSc and move to the Remote System Explorer Perspective, click on Help and select Check Release Level. The required PTF's will be displayed. B.Open WDSc and move to the Remote System Explorer Perspective. Rightclick the server connection. Log in and click on Check PTF. The required PTF's will be displayed. C.Open WDSc and move to the Remote System Explorer Perspective. Expand the server connection. Log in and expand iSeries Commands, then click on Check PTF. The required PTF's will be displayed. D.Open WDSc and move to the Remote System Explorer Perspective. Expand the server connection. Log in and Rightclick iSeries Objects, then select Verify Connection. The required PTF's will be displayed. Correct:D 136.An administrator is restoring their entire system after a system failure. They have already run the RSTUSRPRF USRPRF(*ALL), RSTCFG, and RSTLIB LIB(*NONSYS). What is the effect of running the RSTAUT? A.It restores authorization lists. B.It restores all private authorities. C.It restores user profile special authorities. D.It restores user authorities to Licensed Internal Code. Correct:B 137.Which of the following will automatically start Integrated System x Servers after each IPL? A.The device description for the System x servers must be set to ONLINE(*YES). B.The Network Server Description for the System x servers must be set to ONLINE(*YES). C.The TCP/IP interface assigned to the PPP link for each server must be set to AUTOSTART(*YES). D.A VRYCFG command with STATUS(*ON) specified must be added to the system startup job for each System x server. Correct:C





138.Which document provides a centralized list of changes for each i5/OS release? A.Memo to Users B.i5/OS Information Center C.Cumulative PTF Cover Letter D.Preventive Service Checklist Correct:A




KillTest.com was founded in 2006. The safer,easier way to help you pass any IT Certification exams . We provide high quality IT Certification exams practice questions and answers(Q&A). Especially Adobe, Apple, Citrix, Comptia, EMC, HP, HuaWei, LPI, Nortel, Oracle, SUN, Vmware and so on. And help you pass any IT Certification exams at the first try.

You can reach us at any of the email addresses listed below.

English Customer: Chinese Customer:

Sales : [email protected] [email protected] Support: [email protected] [email protected]

English Version http://www.KillTest.com Chinese (Traditional) http://www.KillTest.net Chinese (Simplified) http://www.KillTest.cn

http://www.killtest.com/Adobe/

http://www.killtest.com/Apple/

http://www.killtest.com/Citrix/

http://www.killtest.com/Comptia/

http://www.killtest.com/EMC/

http://www.killtest.com/HP/

http://www.killtest.com/huawei/

http://www.killtest.com/LPI/

http://www.killtest.com/Nortel/

http://www.killtest.com/Oracle/

http://www.killtest.com/SUN/

http://www.killtest.com/Vmware/

Documents

As400 System Admin Certification